Home
last modified time | relevance | path

Searched +full:0 +full:x3210 (Results 1 – 25 of 36) sorted by relevance

12

/linux-6.14.4/drivers/gpu/drm/i915/display/
Dintel_fbc_regs.h9 #define FBC_CFB_BASE _MMIO(0x3200) /* 4k page aligned */
10 #define FBC_LL_BASE _MMIO(0x3204) /* 4k page aligned */
11 #define FBC_CONTROL _MMIO(0x3208)
21 #define FBC_CTL_FENCENO_MASK REG_GENMASK(3, 0)
23 #define FBC_COMMAND _MMIO(0x320c)
24 #define FBC_CMD_COMPRESS REG_BIT(0)
25 #define FBC_STATUS _MMIO(0x3210)
29 #define FBC_STAT_CURRENT_LINE_MASK REG_GENMASK(10, 0)
30 #define FBC_CONTROL2 _MMIO(0x3214) /* i965gm only */
33 #define FBC_CTL_IDLE_IMM REG_FIELD_PREP(FBC_CTL_IDLE_MASK, 0)
[all …]
/linux-6.14.4/Documentation/devicetree/bindings/timer/
Drealtek,otto-timer.yaml18 pattern: "^timer@[0-9a-f]+$"
57 reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
58 <0x3230 0x10>, <0x3240 0x10>;
/linux-6.14.4/arch/mips/boot/dts/realtek/
Drtl930x.dtsi10 #size-cells = <0>;
12 cpu@0 {
15 reg = <0>;
16 clocks = <&baseclk 0>;
23 #clock-cells = <0>;
29 #clock-cells = <0>;
35 reg = <0x1b000000 0x10000>;
41 reg = <0x0c 0x4>;
42 value = <0x01>;
47 reg = <0x36c 0x14>;
[all …]
/linux-6.14.4/drivers/net/ethernet/mellanox/mlxbf_gige/
Dmlxbf_gige_regs.h13 #define MLXBF_GIGE_VERSION 0x0000
14 #define MLXBF_GIGE_VERSION_BF2 0x0
15 #define MLXBF_GIGE_VERSION_BF3 0x1
16 #define MLXBF_GIGE_STATUS 0x0010
17 #define MLXBF_GIGE_STATUS_READY BIT(0)
18 #define MLXBF_GIGE_INT_STATUS 0x0028
19 #define MLXBF_GIGE_INT_STATUS_RX_RECEIVE_PACKET BIT(0)
28 #define MLXBF_GIGE_INT_EN 0x0030
29 #define MLXBF_GIGE_INT_EN_RX_RECEIVE_PACKET BIT(0)
38 #define MLXBF_GIGE_INT_MASK 0x0038
[all …]
/linux-6.14.4/drivers/media/rc/keymaps/
Drc-dreambox.c22 { 0x3200, KEY_POWER },
25 { 0x3290, KEY_HELP },
28 { 0x3201, KEY_1 },
29 { 0x3202, KEY_2 },
30 { 0x3203, KEY_3 },
31 { 0x3204, KEY_4 },
32 { 0x3205, KEY_5 },
33 { 0x3206, KEY_6 },
34 { 0x3207, KEY_7 },
35 { 0x3208, KEY_8 },
[all …]
/linux-6.14.4/drivers/gpu/drm/omapdrm/dss/
Dhdmi_phy.c36 for (i = 0; i < 8; i += 2) { in hdmi_phy_parse_lanes()
43 if (dx < 0 || dx >= 8) in hdmi_phy_parse_lanes()
46 if (dy < 0 || dy >= 8) in hdmi_phy_parse_lanes()
56 pol = 0; in hdmi_phy_parse_lanes()
65 return 0; in hdmi_phy_parse_lanes()
71 0x0123, in hdmi_phy_configure_lanes()
72 0x0132, in hdmi_phy_configure_lanes()
73 0x0312, in hdmi_phy_configure_lanes()
74 0x0321, in hdmi_phy_configure_lanes()
75 0x0231, in hdmi_phy_configure_lanes()
[all …]
/linux-6.14.4/drivers/video/fbdev/omap2/omapfb/dss/
Dhdmi_phy.c45 for (i = 0; i < 8; i += 2) { in hdmi_phy_parse_lanes()
52 if (dx < 0 || dx >= 8) in hdmi_phy_parse_lanes()
55 if (dy < 0 || dy >= 8) in hdmi_phy_parse_lanes()
65 pol = 0; in hdmi_phy_parse_lanes()
74 return 0; in hdmi_phy_parse_lanes()
80 0x0123, in hdmi_phy_configure_lanes()
81 0x0132, in hdmi_phy_configure_lanes()
82 0x0312, in hdmi_phy_configure_lanes()
83 0x0321, in hdmi_phy_configure_lanes()
84 0x0231, in hdmi_phy_configure_lanes()
[all …]
/linux-6.14.4/drivers/net/fddi/skfp/h/
Dsmt_p.h19 #define SMT_P0012 0x0012
21 #define SMT_P0015 0x0015
22 #define SMT_P0016 0x0016
23 #define SMT_P0017 0x0017
24 #define SMT_P0018 0x0018
25 #define SMT_P0019 0x0019
27 #define SMT_P001A 0x001a
28 #define SMT_P001B 0x001b
29 #define SMT_P001C 0x001c
30 #define SMT_P001D 0x001d
[all …]
/linux-6.14.4/drivers/net/ethernet/chelsio/cxgb/
Dpm3393.c45 #define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \
88 return 0; in pmread()
94 return 0; in pmwrite()
100 return 0; in pm3393_reset()
117 pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff); in pm3393_interrupt_enable()
118 pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff); in pm3393_interrupt_enable()
119 pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff); in pm3393_interrupt_enable()
120 pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff); in pm3393_interrupt_enable()
123 pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0); in pm3393_interrupt_enable()
124 pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0); in pm3393_interrupt_enable()
[all …]
Dsuni1x10gexp_regs.h29 #define SUNI1x10GEXP_REG_SIZEOF_MAC_FILTER 0x0003
37 #define SUNI1x10GEXP_REG_SIZEOF_MAC_VID_FILTER 0x0001
44 #define SUNI1x10GEXP_REG_SIZEOF_MSTAT_COUNT 0x0004
57 #define SUNI1x10GEXP_REG_IDENTIFICATION 0x0000
58 #define SUNI1x10GEXP_REG_PRODUCT_REVISION 0x0001
59 #define SUNI1x10GEXP_REG_CONFIG_AND_RESET_CONTROL 0x0002
60 #define SUNI1x10GEXP_REG_LOOPBACK_MISC_CTRL 0x0003
61 #define SUNI1x10GEXP_REG_DEVICE_STATUS 0x0004
62 #define SUNI1x10GEXP_REG_GLOBAL_PERFORMANCE_MONITOR_UPDATE 0x0005
64 #define SUNI1x10GEXP_REG_MDIO_COMMAND 0x0006
[all …]
/linux-6.14.4/drivers/net/ethernet/atheros/alx/
Dreg.h38 #define ALX_DEV_ID_AR8161 0x1091
39 #define ALX_DEV_ID_E2200 0xe091
40 #define ALX_DEV_ID_E2400 0xe0a1
41 #define ALX_DEV_ID_E2500 0xe0b1
42 #define ALX_DEV_ID_AR8162 0x1090
43 #define ALX_DEV_ID_AR8171 0x10A1
44 #define ALX_DEV_ID_AR8172 0x10A0
47 * bit(0): with xD support
52 #define ALX_REV_A0 0
57 #define ALX_DEV_CTRL 0x0060
[all …]
/linux-6.14.4/drivers/media/i2c/
Dimx412.c21 #define IMX412_REG_MODE_SELECT 0x0100
22 #define IMX412_MODE_STANDBY 0x00
23 #define IMX412_MODE_STREAMING 0x01
26 #define IMX412_REG_LPFR 0x0340
29 #define IMX412_REG_ID 0x0016
30 #define IMX412_ID 0x577
33 #define IMX412_REG_EXPOSURE_CIT 0x0202
37 #define IMX412_EXPOSURE_DEFAULT 0x0648
40 #define IMX412_REG_AGAIN 0x0204
41 #define IMX412_AGAIN_MIN 0
[all …]
Dimx296.c30 #define IMX296_REG_ADDR_MASK 0xffff
32 #define IMX296_CTRL00 IMX296_REG_8BIT(0x3000)
33 #define IMX296_CTRL00_STANDBY BIT(0)
34 #define IMX296_CTRL08 IMX296_REG_8BIT(0x3008)
35 #define IMX296_CTRL08_REGHOLD BIT(0)
36 #define IMX296_CTRL0A IMX296_REG_8BIT(0x300a)
37 #define IMX296_CTRL0A_XMSTA BIT(0)
38 #define IMX296_CTRL0B IMX296_REG_8BIT(0x300b)
39 #define IMX296_CTRL0B_TRIGEN BIT(0)
40 #define IMX296_CTRL0D IMX296_REG_8BIT(0x300d)
[all …]
/linux-6.14.4/drivers/net/phy/mediatek/
Dmtk-ge-soc.c13 #define MTK_GPHY_ID_MT7981 0x03a29461
14 #define MTK_GPHY_ID_MT7988 0x03a29481
16 #define MTK_EXT_PAGE_ACCESS 0x1f
17 #define MTK_PHY_PAGE_STANDARD 0x0000
18 #define MTK_PHY_PAGE_EXTENDED_3 0x0003
20 #define MTK_PHY_LPI_REG_14 0x14
21 #define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
23 #define MTK_PHY_LPI_REG_1c 0x1c
26 #define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
27 #define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
[all …]
/linux-6.14.4/drivers/net/dsa/mv88e6xxx/
Dport.c47 /* Offset 0x00: MAC (or PCS or Physical) Status Register
70 /* Offset 0x01: MAC (or PCS or Physical) Control Register
74 * For port's MAC speed, ForceSpd (or SpdValue) bits 1:0 program the value.
106 return 0; in mv88e6xxx_port_set_rgmii_delay()
117 return 0; in mv88e6xxx_port_set_rgmii_delay()
132 if (port != 0) in mv88e6390_port_set_rgmii_delay()
182 return 0; in mv88e6xxx_port_set_link()
188 int err = 0; in mv88e6xxx_port_sync_link()
205 int err = 0; in mv88e6185_port_sync_link()
305 return 0; in mv88e6xxx_port_set_speed_duplex()
[all …]
/linux-6.14.4/drivers/gpu/drm/amd/include/asic_reg/dpcs/
Ddpcs_3_1_4_offset.h31 // base address: 0x0
32 …DPCSSYS_CR0_SUP_DIG_IDCODE_LO 0x0000
33 …DPCSSYS_CR0_SUP_DIG_IDCODE_HI 0x0001
34 …DPCSSYS_CR0_SUP_DIG_REFCLK_OVRD_IN 0x0002
35 …DPCSSYS_CR0_SUP_DIG_MPLLA_DIV_CLK_OVRD_IN 0x0003
36 …DPCSSYS_CR0_SUP_DIG_MPLLA_HDMI_CLK_OVRD_IN 0x0004
37 …DPCSSYS_CR0_SUP_DIG_MPLLB_DIV_CLK_OVRD_IN 0x0005
38 …DPCSSYS_CR0_SUP_DIG_MPLLB_HDMI_CLK_OVRD_IN 0x0006
39 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_0 0x0007
40 …DPCSSYS_CR0_SUP_DIG_MPLLA_OVRD_IN_1 0x0008
[all …]
Ddpcs_4_2_0_offset.h27 // base address: 0x0
28 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934
30 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935
35 // base address: 0x360
36 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c
38 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d
43 // base address: 0x6c0
44 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4
46 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5
51 // base address: 0xa20
[all …]
Ddpcs_4_2_2_offset.h14 // base address: 0x0
15 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934
17 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935
22 // base address: 0x360
23 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c
25 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d
30 // base address: 0x6c0
31 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4
33 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5
38 // base address: 0xa20
[all …]
Ddpcs_4_2_3_offset.h31 // base address: 0x0
32 …DPCSSYS_CR0_DPCSSYS_CR_ADDR 0x2934
34 …DPCSSYS_CR0_DPCSSYS_CR_DATA 0x2935
39 // base address: 0x360
40 …DPCSSYS_CR1_DPCSSYS_CR_ADDR 0x2a0c
42 …DPCSSYS_CR1_DPCSSYS_CR_DATA 0x2a0d
47 // base address: 0x6c0
48 …DPCSSYS_CR2_DPCSSYS_CR_ADDR 0x2ae4
50 …DPCSSYS_CR2_DPCSSYS_CR_DATA 0x2ae5
55 // base address: 0xa20
[all …]
/linux-6.14.4/drivers/pinctrl/tegra/
Dpinctrl-tegra114.c24 #define TEGRA_PIN_CLK_32K_OUT_PA0 _GPIO(0)
199 #define TEGRA_PIN_CORE_PWR_REQ _PIN(0)
1538 #define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
1539 #define PINGROUP_REG_A 0x3000 /* bank 1 */
1560 .mux_bit = 0, \
1573 .parked_bitmask = 0, \
1592 .drv_bank = 0, \
1605 .parked_bitmask = 0, \
1610 …PINGROUP(ulpi_data0_po1, SPI3, HSI, UARTA, ULPI, 0x3000, N, N…
1611 …PINGROUP(ulpi_data1_po2, SPI3, HSI, UARTA, ULPI, 0x3004, N, N…
[all …]
Dpinctrl-tegra124.c24 #define TEGRA_PIN_CLK_32K_OUT_PA0 _GPIO(0)
213 #define TEGRA_PIN_CORE_PWR_REQ _PIN(0)
1705 #define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
1706 #define PINGROUP_REG_A 0x3000 /* bank 1 */
1707 #define MIPI_PAD_CTRL_PINGROUP_REG_A 0x820 /* bank 2 */
1729 .mux_bit = 0, \
1742 .parked_bitmask = 0, \
1761 .drv_bank = 0, \
1774 .parked_bitmask = 0, \
1803 …PINGROUP(ulpi_data0_po1, SPI3, HSI, UARTA, ULPI, 0x3000, N, N…
[all …]
Dpinctrl-tegra210.c22 #define TEGRA_PIN_PEX_L0_RST_N_PA0 _GPIO(0)
182 #define TEGRA_PIN_CORE_PWR_REQ _PIN(0)
1266 #define DRV_PINGROUP_REG_A 0x8d4 /* bank 0 */
1267 #define PINGROUP_REG_A 0x3000 /* bank 1 */
1290 .mux_bit = 0, \
1306 .drv_bank = 0, \
1335 .drv_bank = 0, \
1354 …PINGROUP(sdmmc1_clk_pm0, SDMMC1, RSVD1, RSVD2, RSVD3, 0x3000, Y, Y, N, N,…
1355 …PINGROUP(sdmmc1_cmd_pm1, SDMMC1, SPI3, RSVD2, RSVD3, 0x3004, Y, Y, N, N,…
1356 …PINGROUP(sdmmc1_dat3_pm2, SDMMC1, SPI3, RSVD2, RSVD3, 0x3008, Y, Y, N, N,…
[all …]
Dpinctrl-tegra30.c24 #define TEGRA_PIN_CLK_32K_OUT_PA0 _GPIO(0)
278 #define TEGRA_PIN_CLK_32K_IN _PIN(0)
2099 #define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
2100 #define PINGROUP_REG_A 0x3000 /* bank 1 */
2121 .mux_bit = 0, \
2134 .parked_bitmask = 0, \
2153 .drv_bank = 0, \
2166 .parked_bitmask = 0, \
2171 …PINGROUP(clk_32k_out_pa0, BLINK, RSVD2, RSVD3, RSVD4, 0x331c, N, …
2172 …PINGROUP(uart3_cts_n_pa1, UARTC, RSVD2, GMI, RSVD4, 0x317c, N, …
[all …]
/linux-6.14.4/sound/soc/codecs/
Drt1011.c37 { RT1011_POWER_9, 0xa840 },
39 { RT1011_ADC_SET_5, 0x0a20 },
40 { RT1011_DAC_SET_2, 0xa032 },
42 { RT1011_SPK_PRO_DC_DET_1, 0xb00c },
43 { RT1011_SPK_PRO_DC_DET_2, 0xcccc },
45 { RT1011_A_TIMING_1, 0x6054 },
47 { RT1011_POWER_7, 0x3e55 },
48 { RT1011_POWER_8, 0x0520 },
49 { RT1011_BOOST_CON_1, 0xe188 },
50 { RT1011_POWER_4, 0x16f2 },
[all …]
/linux-6.14.4/drivers/clk/qcom/
Dmmcc-apq8084.c44 .l_reg = 0x0004,
45 .m_reg = 0x0008,
46 .n_reg = 0x000c,
47 .config_reg = 0x0014,
48 .mode_reg = 0x0000,
49 .status_reg = 0x001c,
62 .enable_reg = 0x0100,
63 .enable_mask = BIT(0),
75 .l_reg = 0x0044,
76 .m_reg = 0x0048,
[all …]

12