Searched +full:0 +full:xc2000000 (Results 1 – 15 of 15) sorted by relevance
/linux-6.14.4/Documentation/devicetree/bindings/pci/ |
D | nvidia,tegra20-pcie.txt | 27 - cell 0 specifies the bus and device numbers of the root port: 30 - cell 1 denotes the upper 32 address bits and should be 0 45 - 0x81000000: I/O memory region 46 - 0x82000000: non-prefetchable memory region 47 - 0xc2000000: prefetchable memory region 73 - pinctrl-0: phandle for the default/active state of pin configurations. 104 - If lanes 0 to 3 are used: 150 - Root port 0 uses 4 lanes, root port 1 is unused. 158 "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes. 171 reg = <0x80003000 0x00000800 /* PADS registers */ [all …]
|
D | nvidia,tegra194-pcie.yaml | 85 - const: p2u-0 123 0: C0 132 0 : C0 260 bus@0 { 263 ranges = <0x0 0x0 0x0 0x8 0x0>; 268 reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ 269 <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ 270 <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ 271 <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ 278 linux,pci-domain = <0>; [all …]
|
/linux-6.14.4/tools/testing/selftests/kvm/s390/ |
D | resets.c | 28 unsigned long cr2_59 = 0x10; /* enable guarded storage */ in guest_code_initial() 29 unsigned long cr8_63 = 0x1; /* monitor mask = 1 */ in guest_code_initial() 36 " lghi 2,0x11\n" /* Round toward 0 */ in guest_code_initial() 37 " sfpc 2\n" /* set fpc to !=0 */ in guest_code_initial() 38 " lctlg 2,2,%0\n" in guest_code_initial() 43 " llihh 0,0xffff\n" in guest_code_initial() 44 " llihl 1,0x5555\n" in guest_code_initial() 45 " llilh 2,0xaaaa\n" in guest_code_initial() 46 " llill 3,0x0000\n" in guest_code_initial() 48 " lghi 4,0x1\n" in guest_code_initial() [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/net/ |
D | nxp,netc-blk-ctrl.yaml | 54 "^pcie@[0-9a-f]+$": 75 reg = <0x0 0x4cde0000 0x0 0x10000>, 76 <0x0 0x4cdf0000 0x0 0x10000>, 77 <0x0 0x4c81000c 0x0 0x18>; 88 reg = <0x0 0x4cb00000 0x0 0x100000>; 92 bus-range = <0x1 0x1>; 93 ranges = <0x82000000 0x0 0x4cce0000 0x0 0x4cce0000 0x0 0x20000 94 0xc2000000 0x0 0x4cd10000 0x0 0x4cd10000 0x0 0x10000>; 96 mdio@0,0 { 98 reg = <0x010000 0 0 0 0>; [all …]
|
/linux-6.14.4/arch/arm/boot/dts/arm/ |
D | integratorap-im-pd1.dts | 21 reg = <0xc2000000 0x00100000>; 28 syscon@0 { 30 reg = <0x00000000 0x1000>; 35 vco1: clock-controller@0 { 37 reg = <0x00 0x04>; 38 #clock-cells = <0>; 39 lock-offset = <0x08>; 40 vco-offset = <0x00>; 47 reg = <0x04 0x04>; 48 #clock-cells = <0>; [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/freescale/ |
D | fsl-ls1028a.dtsi | 23 #size-cells = <0>; 25 cpu0: cpu@0 { 28 reg = <0x0>; 30 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 31 i-cache-size = <0xc000>; 34 d-cache-size = <0x8000>; 45 reg = <0x1>; 47 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 48 i-cache-size = <0xc000>; 51 d-cache-size = <0x8000>; [all …]
|
D | imx95.dtsi | 23 #size-cells = <0>; 30 arm,psci-suspend-param = <0x0010033>; 39 A55_0: cpu@0 { 42 reg = <0x0>; 60 reg = <0x100>; 78 reg = <0x200>; 96 reg = <0x300>; 114 reg = <0x400>; 132 reg = <0x500>; 247 #clock-cells = <0>; [all …]
|
/linux-6.14.4/include/linux/firmware/ |
D | xlnx-zynqmp.h | 21 #define ZYNQMP_PM_VERSION_MINOR 0 27 #define ZYNQMP_TZ_VERSION_MINOR 0 33 #define PM_SIP_SVC 0xC2000000 36 #define GET_SIP_SVC_VERSION (0x8200ff03U) 39 #define SIP_SVC_VERSION_MAJOR (0U) 46 #define PASS_THROUGH_FW_CMD_ID GENMASK(11, 0) 54 #define ZYNQMP_FAMILY_CODE 0x23 55 #define VERSAL_FAMILY_CODE 0x26 58 #define ALL_SUB_FAMILY_CODE 0x00 59 #define VERSAL_SUB_FAMILY_CODE 0x01 [all …]
|
/linux-6.14.4/arch/arm/boot/dts/renesas/ |
D | r8a7740.dtsi | 20 #size-cells = <0>; 21 cpu@0 { 24 reg = <0x0>; 35 reg = <0xc2800000 0x1000>, 36 <0xc2000000 0x1000>; 41 reg = <0xf0100000 0x1000>; 53 reg = <0xfe400000 0x400>; 68 reg = <0xfe910000 0x3000>; 77 reg = <0xfe914000 0x3000>; 87 reg = <0xe6138000 0x170>; [all …]
|
/linux-6.14.4/crypto/ |
D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|
/linux-6.14.4/arch/powerpc/ |
D | Kconfig | 286 …-flag) -mstack-protector-guard=tls -mstack-protector-guard-reg=r2 -mstack-protector-guard-offset=0) 287 …flag) -mstack-protector-guard=tls -mstack-protector-guard-reg=r13 -mstack-protector-guard-offset=0) 473 default 0 808 default 0x5deadbeef0000000 if PPC64 809 default 0 867 definition from 0x10000 to 0x40000 in older versions. 1201 default "0x30000000" 1253 default "0xc0000000" 1269 default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL 1270 default "0xc0000000" [all …]
|
/linux-6.14.4/sound/pci/mixart/ |
D | mixart_mixer.c | 24 0xc2c00000, /* [000] -96.0 dB */ 25 0xc2bf0000, /* [001] -95.5 dB */ 26 0xc2be0000, /* [002] -95.0 dB */ 27 0xc2bd0000, /* [003] -94.5 dB */ 28 0xc2bc0000, /* [004] -94.0 dB */ 29 0xc2bb0000, /* [005] -93.5 dB */ 30 0xc2ba0000, /* [006] -93.0 dB */ 31 0xc2b90000, /* [007] -92.5 dB */ 32 0xc2b80000, /* [008] -92.0 dB */ 33 0xc2b70000, /* [009] -91.5 dB */ [all …]
|
/linux-6.14.4/arch/s390/net/ |
D | bpf_jit_comp.c | 61 #define SEEN_MEM BIT(0) /* use mem[] for temporary storage */ 66 #define NVREGS 0xffc0 /* %r6-%r15 */ 71 #define REG_W0 (MAX_BPF_JIT_REG + 0) /* Work register 1 (even) */ 75 #define REG_0 REG_W0 /* Register 0 */ 106 [REG_W0] = 0, 177 unsigned int __disp = (disp) & 0xfff; \ 191 unsigned int __imm = (imm) & 0xffff; \ 198 long __pcrel = ((pcrel) >> 1) & 0xffff; \ 205 _EMIT4((op) | (mask) << 20 | (__rel & 0xffff)); \ 219 unsigned int __disp = (disp) & 0xfff; \ [all …]
|
/linux-6.14.4/sound/pci/hda/ |
D | patch_ca0132.c | 37 #define FLOAT_ZERO 0x00000000 38 #define FLOAT_ONE 0x3f800000 39 #define FLOAT_TWO 0x40000000 40 #define FLOAT_THREE 0x40400000 41 #define FLOAT_FIVE 0x40a00000 42 #define FLOAT_SIX 0x40c00000 43 #define FLOAT_EIGHT 0x41000000 44 #define FLOAT_MINUS_5 0xc0a00000 46 #define UNSOL_TAG_DSP 0x16 55 #define MASTERCONTROL 0x80 [all …]
|
/linux-6.14.4/drivers/net/ethernet/broadcom/ |
D | tg3.c | 71 #define BAR_0 0 105 #define RESET_KIND_SHUTDOWN 0 109 #define TG3_DEF_RX_MODE 0 110 #define TG3_DEF_TX_MODE 0 195 #if NET_IP_ALIGN == 0 || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) 201 #if (NET_IP_ALIGN != 0) 234 module_param(tg3_debug, int, 0); 237 #define TG3_DRV_DATA_FLAG_10_100_ONLY 0x0001 238 #define TG3_DRV_DATA_FLAG_5705_10_100 0x0002 355 {PCI_DEVICE(0x10cf, 0x11a2)}, /* Fujitsu 1000base-SX with BCM5703SKHB */ [all …]
|