1 /* valid adjtimex test
2 * by: John Stultz <[email protected]>
3 * (C) Copyright Linaro 2015
4 * Licensed under the GPLv2
5 *
6 * This test validates adjtimex interface with valid
7 * and invalid test data.
8 *
9 * Usage: valid-adjtimex
10 *
11 * To build:
12 * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt
13 *
14 * This program is free software: you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation, either version 2 of the License, or
17 * (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 */
24 #include <stdio.h>
25 #include <stdlib.h>
26 #include <time.h>
27 #include <sys/time.h>
28 #include <sys/timex.h>
29 #include <string.h>
30 #include <signal.h>
31 #include <unistd.h>
32 #include <include/vdso/time64.h>
33 #include "../kselftest.h"
34
35 #define ADJ_SETOFFSET 0x0100
36
37 #include <sys/syscall.h>
clock_adjtime(clockid_t id,struct timex * tx)38 int clock_adjtime(clockid_t id, struct timex *tx)
39 {
40 return syscall(__NR_clock_adjtime, id, tx);
41 }
42
43
44 /* clear NTP time_status & time_state */
clear_time_state(void)45 int clear_time_state(void)
46 {
47 struct timex tx;
48 int ret;
49
50 tx.modes = ADJ_STATUS;
51 tx.status = 0;
52 ret = adjtimex(&tx);
53 return ret;
54 }
55
56 #define NUM_FREQ_VALID 32
57 #define NUM_FREQ_OUTOFRANGE 4
58 #define NUM_FREQ_INVALID 2
59
60 #define SHIFTED_PPM (1 << 16)
61
62 long valid_freq[NUM_FREQ_VALID] = {
63 -499 * SHIFTED_PPM,
64 -450 * SHIFTED_PPM,
65 -400 * SHIFTED_PPM,
66 -350 * SHIFTED_PPM,
67 -300 * SHIFTED_PPM,
68 -250 * SHIFTED_PPM,
69 -200 * SHIFTED_PPM,
70 -150 * SHIFTED_PPM,
71 -100 * SHIFTED_PPM,
72 -75 * SHIFTED_PPM,
73 -50 * SHIFTED_PPM,
74 -25 * SHIFTED_PPM,
75 -10 * SHIFTED_PPM,
76 -5 * SHIFTED_PPM,
77 -1 * SHIFTED_PPM,
78 -1000,
79 1 * SHIFTED_PPM,
80 5 * SHIFTED_PPM,
81 10 * SHIFTED_PPM,
82 25 * SHIFTED_PPM,
83 50 * SHIFTED_PPM,
84 75 * SHIFTED_PPM,
85 100 * SHIFTED_PPM,
86 150 * SHIFTED_PPM,
87 200 * SHIFTED_PPM,
88 250 * SHIFTED_PPM,
89 300 * SHIFTED_PPM,
90 350 * SHIFTED_PPM,
91 400 * SHIFTED_PPM,
92 450 * SHIFTED_PPM,
93 499 * SHIFTED_PPM,
94 };
95
96 long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
97 -1000 * SHIFTED_PPM,
98 -550 * SHIFTED_PPM,
99 550 * SHIFTED_PPM,
100 1000 * SHIFTED_PPM,
101 };
102
103 #define LONG_MAX (~0UL>>1)
104 #define LONG_MIN (-LONG_MAX - 1)
105
106 long invalid_freq[NUM_FREQ_INVALID] = {
107 LONG_MAX,
108 LONG_MIN,
109 };
110
validate_freq(void)111 int validate_freq(void)
112 {
113 struct timex tx;
114 int ret, pass = 0;
115 int i;
116
117 clear_time_state();
118
119 memset(&tx, 0, sizeof(struct timex));
120 /* Set the leap second insert flag */
121
122 printf("Testing ADJ_FREQ... ");
123 fflush(stdout);
124 for (i = 0; i < NUM_FREQ_VALID; i++) {
125 tx.modes = ADJ_FREQUENCY;
126 tx.freq = valid_freq[i];
127
128 ret = adjtimex(&tx);
129 if (ret < 0) {
130 printf("[FAIL]\n");
131 printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
132 valid_freq[i], valid_freq[i]>>16);
133 pass = -1;
134 goto out;
135 }
136 tx.modes = 0;
137 ret = adjtimex(&tx);
138 if (tx.freq != valid_freq[i]) {
139 printf("Warning: freq value %ld not what we set it (%ld)!\n",
140 tx.freq, valid_freq[i]);
141 }
142 }
143 for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
144 tx.modes = ADJ_FREQUENCY;
145 tx.freq = outofrange_freq[i];
146
147 ret = adjtimex(&tx);
148 if (ret < 0) {
149 printf("[FAIL]\n");
150 printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
151 outofrange_freq[i], outofrange_freq[i]>>16);
152 pass = -1;
153 goto out;
154 }
155 tx.modes = 0;
156 ret = adjtimex(&tx);
157 if (tx.freq == outofrange_freq[i]) {
158 printf("[FAIL]\n");
159 printf("ERROR: out of range value %ld actually set!\n",
160 tx.freq);
161 pass = -1;
162 goto out;
163 }
164 }
165
166
167 if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
168 for (i = 0; i < NUM_FREQ_INVALID; i++) {
169 tx.modes = ADJ_FREQUENCY;
170 tx.freq = invalid_freq[i];
171 ret = adjtimex(&tx);
172 if (ret >= 0) {
173 printf("[FAIL]\n");
174 printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
175 invalid_freq[i]);
176 pass = -1;
177 goto out;
178 }
179 }
180 }
181
182 printf("[OK]\n");
183 out:
184 /* reset freq to zero */
185 tx.modes = ADJ_FREQUENCY;
186 tx.freq = 0;
187 ret = adjtimex(&tx);
188
189 return pass;
190 }
191
192
set_offset(long long offset,int use_nano)193 int set_offset(long long offset, int use_nano)
194 {
195 struct timex tmx = {};
196 int ret;
197
198 tmx.modes = ADJ_SETOFFSET;
199 if (use_nano) {
200 tmx.modes |= ADJ_NANO;
201
202 tmx.time.tv_sec = offset / NSEC_PER_SEC;
203 tmx.time.tv_usec = offset % NSEC_PER_SEC;
204
205 if (offset < 0 && tmx.time.tv_usec) {
206 tmx.time.tv_sec -= 1;
207 tmx.time.tv_usec += NSEC_PER_SEC;
208 }
209 } else {
210 tmx.time.tv_sec = offset / USEC_PER_SEC;
211 tmx.time.tv_usec = offset % USEC_PER_SEC;
212
213 if (offset < 0 && tmx.time.tv_usec) {
214 tmx.time.tv_sec -= 1;
215 tmx.time.tv_usec += USEC_PER_SEC;
216 }
217 }
218
219 ret = clock_adjtime(CLOCK_REALTIME, &tmx);
220 if (ret < 0) {
221 printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
222 printf("[FAIL]\n");
223 return -1;
224 }
225 return 0;
226 }
227
set_bad_offset(long sec,long usec,int use_nano)228 int set_bad_offset(long sec, long usec, int use_nano)
229 {
230 struct timex tmx = {};
231 int ret;
232
233 tmx.modes = ADJ_SETOFFSET;
234 if (use_nano)
235 tmx.modes |= ADJ_NANO;
236
237 tmx.time.tv_sec = sec;
238 tmx.time.tv_usec = usec;
239 ret = clock_adjtime(CLOCK_REALTIME, &tmx);
240 if (ret >= 0) {
241 printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
242 printf("[FAIL]\n");
243 return -1;
244 }
245 return 0;
246 }
247
validate_set_offset(void)248 int validate_set_offset(void)
249 {
250 printf("Testing ADJ_SETOFFSET... ");
251 fflush(stdout);
252
253 /* Test valid values */
254 if (set_offset(NSEC_PER_SEC - 1, 1))
255 return -1;
256
257 if (set_offset(-NSEC_PER_SEC + 1, 1))
258 return -1;
259
260 if (set_offset(-NSEC_PER_SEC - 1, 1))
261 return -1;
262
263 if (set_offset(5 * NSEC_PER_SEC, 1))
264 return -1;
265
266 if (set_offset(-5 * NSEC_PER_SEC, 1))
267 return -1;
268
269 if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
270 return -1;
271
272 if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
273 return -1;
274
275 if (set_offset(USEC_PER_SEC - 1, 0))
276 return -1;
277
278 if (set_offset(-USEC_PER_SEC + 1, 0))
279 return -1;
280
281 if (set_offset(-USEC_PER_SEC - 1, 0))
282 return -1;
283
284 if (set_offset(5 * USEC_PER_SEC, 0))
285 return -1;
286
287 if (set_offset(-5 * USEC_PER_SEC, 0))
288 return -1;
289
290 if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
291 return -1;
292
293 if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
294 return -1;
295
296 /* Test invalid values */
297 if (set_bad_offset(0, -1, 1))
298 return -1;
299 if (set_bad_offset(0, -1, 0))
300 return -1;
301 if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
302 return -1;
303 if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
304 return -1;
305 if (set_bad_offset(0, NSEC_PER_SEC, 1))
306 return -1;
307 if (set_bad_offset(0, USEC_PER_SEC, 0))
308 return -1;
309 if (set_bad_offset(0, -NSEC_PER_SEC, 1))
310 return -1;
311 if (set_bad_offset(0, -USEC_PER_SEC, 0))
312 return -1;
313
314 printf("[OK]\n");
315 return 0;
316 }
317
main(int argc,char ** argv)318 int main(int argc, char **argv)
319 {
320 if (validate_freq())
321 ksft_exit_fail();
322
323 if (validate_set_offset())
324 ksft_exit_fail();
325
326 ksft_exit_pass();
327 }
328