1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Linaro Ltd. 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include <dt-bindings/sound/qcom,q6afe.h> 11#include <dt-bindings/sound/qcom,q6asm.h> 12#include <dt-bindings/usb/pd.h> 13#include "sm8250.dtsi" 14#include "pm8150.dtsi" 15#include "pm8150b.dtsi" 16#include "pm8150l.dtsi" 17 18/ { 19 model = "Qualcomm Technologies, Inc. Robotics RB5"; 20 compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; 21 qcom,msm-id = <455 0x20001>; 22 qcom,board-id = <11 3>; 23 24 aliases { 25 serial0 = &uart12; 26 serial1 = &uart6; 27 sdhc2 = &sdhc_2; 28 }; 29 30 chosen { 31 stdout-path = "serial0:115200n8"; 32 }; 33 34 /* Fixed crystal oscillator dedicated to MCP2518FD */ 35 clk40m: can-clock { 36 compatible = "fixed-clock"; 37 #clock-cells = <0>; 38 clock-frequency = <40000000>; 39 }; 40 41 dc12v: dc12v-regulator { 42 compatible = "regulator-fixed"; 43 regulator-name = "DC12V"; 44 regulator-min-microvolt = <12000000>; 45 regulator-max-microvolt = <12000000>; 46 regulator-always-on; 47 }; 48 49 hdmi-out { 50 compatible = "hdmi-connector"; 51 type = "a"; 52 53 port { 54 hdmi_con: endpoint { 55 remote-endpoint = <<9611_out>; 56 }; 57 }; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 63 led-user4 { 64 label = "green:user4"; 65 function = LED_FUNCTION_INDICATOR; 66 color = <LED_COLOR_ID_GREEN>; 67 gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; 68 default-state = "off"; 69 panic-indicator; 70 }; 71 72 led-wlan { 73 label = "yellow:wlan"; 74 function = LED_FUNCTION_WLAN; 75 color = <LED_COLOR_ID_YELLOW>; 76 gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; 77 linux,default-trigger = "phy0tx"; 78 default-state = "off"; 79 }; 80 81 led-bt { 82 label = "blue:bt"; 83 function = LED_FUNCTION_BLUETOOTH; 84 color = <LED_COLOR_ID_BLUE>; 85 gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; 86 linux,default-trigger = "bluetooth-power"; 87 default-state = "off"; 88 }; 89 }; 90 91 lt9611_1v2: lt9611-vdd12-regulator { 92 compatible = "regulator-fixed"; 93 regulator-name = "LT9611_1V2"; 94 95 vin-supply = <&vdc_3v3>; 96 regulator-min-microvolt = <1200000>; 97 regulator-max-microvolt = <1200000>; 98 }; 99 100 lt9611_3v3: lt9611-3v3 { 101 compatible = "regulator-fixed"; 102 regulator-name = "LT9611_3V3"; 103 104 vin-supply = <&vdc_3v3>; 105 regulator-min-microvolt = <3300000>; 106 regulator-max-microvolt = <3300000>; 107 regulator-boot-on; 108 regulator-always-on; 109 }; 110 111 qca6390-pmu { 112 compatible = "qcom,qca6390-pmu"; 113 114 pinctrl-names = "default"; 115 pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; 116 117 vddaon-supply = <&vreg_s6a_0p95>; 118 vddpmu-supply = <&vreg_s2f_0p95>; 119 vddrfa0p95-supply = <&vreg_s2f_0p95>; 120 vddrfa1p3-supply = <&vreg_s8c_1p3>; 121 vddrfa1p9-supply = <&vreg_s5a_1p9>; 122 vddpcie1p3-supply = <&vreg_s8c_1p3>; 123 vddpcie1p9-supply = <&vreg_s5a_1p9>; 124 vddio-supply = <&vreg_s4a_1p8>; 125 126 wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; 127 bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; 128 129 regulators { 130 vreg_pmu_rfa_cmn: ldo0 { 131 regulator-name = "vreg_pmu_rfa_cmn"; 132 }; 133 134 vreg_pmu_aon_0p59: ldo1 { 135 regulator-name = "vreg_pmu_aon_0p59"; 136 }; 137 138 vreg_pmu_wlcx_0p8: ldo2 { 139 regulator-name = "vreg_pmu_wlcx_0p8"; 140 }; 141 142 vreg_pmu_wlmx_0p85: ldo3 { 143 regulator-name = "vreg_pmu_wlmx_0p85"; 144 }; 145 146 vreg_pmu_btcmx_0p85: ldo4 { 147 regulator-name = "vreg_pmu_btcmx_0p85"; 148 }; 149 150 vreg_pmu_rfa_0p8: ldo5 { 151 regulator-name = "vreg_pmu_rfa_0p8"; 152 }; 153 154 vreg_pmu_rfa_1p2: ldo6 { 155 regulator-name = "vreg_pmu_rfa_1p2"; 156 }; 157 158 vreg_pmu_rfa_1p7: ldo7 { 159 regulator-name = "vreg_pmu_rfa_1p7"; 160 }; 161 162 vreg_pmu_pcie_0p9: ldo8 { 163 regulator-name = "vreg_pmu_pcie_0p9"; 164 }; 165 166 vreg_pmu_pcie_1p8: ldo9 { 167 regulator-name = "vreg_pmu_pcie_1p8"; 168 }; 169 }; 170 }; 171 172 thermal-zones { 173 conn-thermal { 174 thermal-sensors = <&pm8150b_adc_tm 0>; 175 176 trips { 177 active-config0 { 178 temperature = <125000>; 179 hysteresis = <1000>; 180 type = "critical"; 181 }; 182 }; 183 }; 184 185 pm8150l-pcb-thermal { 186 thermal-sensors = <&pm8150l_adc_tm 1>; 187 188 trips { 189 active-config0 { 190 temperature = <50000>; 191 hysteresis = <4000>; 192 type = "passive"; 193 }; 194 }; 195 }; 196 197 skin-msm-thermal { 198 thermal-sensors = <&pm8150l_adc_tm 0>; 199 200 trips { 201 active-config0 { 202 temperature = <50000>; 203 hysteresis = <4000>; 204 type = "passive"; 205 }; 206 }; 207 }; 208 209 wifi-thermal { 210 thermal-sensors = <&pm8150_adc_tm 1>; 211 212 trips { 213 active-config0 { 214 temperature = <52000>; 215 hysteresis = <4000>; 216 type = "passive"; 217 }; 218 }; 219 }; 220 221 xo-thermal { 222 thermal-sensors = <&pm8150_adc_tm 0>; 223 224 trips { 225 active-config0 { 226 temperature = <50000>; 227 hysteresis = <4000>; 228 type = "passive"; 229 }; 230 }; 231 }; 232 }; 233 234 vbat: vbat-regulator { 235 compatible = "regulator-fixed"; 236 regulator-name = "VBAT"; 237 vin-supply = <&vreg_l11c_3p3>; 238 regulator-min-microvolt = <4200000>; 239 regulator-max-microvolt = <4200000>; 240 regulator-always-on; 241 }; 242 243 vbat_som: vbat-som-regulator { 244 compatible = "regulator-fixed"; 245 regulator-name = "VBAT_SOM"; 246 vin-supply = <&dc12v>; 247 regulator-min-microvolt = <4200000>; 248 regulator-max-microvolt = <4200000>; 249 regulator-always-on; 250 }; 251 252 vdc_3v3: vdc-3v3-regulator { 253 compatible = "regulator-fixed"; 254 regulator-name = "VDC_3V3"; 255 vin-supply = <&vreg_l11c_3p3>; 256 regulator-min-microvolt = <3300000>; 257 regulator-max-microvolt = <3300000>; 258 regulator-always-on; 259 }; 260 261 vdc_5v: vdc-5v-regulator { 262 compatible = "regulator-fixed"; 263 regulator-name = "VDC_5V"; 264 265 regulator-min-microvolt = <5000000>; 266 regulator-max-microvolt = <5000000>; 267 regulator-always-on; 268 vin-supply = <&vreg_l11c_3p3>; 269 }; 270 271 vph_pwr: vph-pwr-regulator { 272 compatible = "regulator-fixed"; 273 regulator-name = "vph_pwr"; 274 regulator-min-microvolt = <3700000>; 275 regulator-max-microvolt = <3700000>; 276 regulator-always-on; 277 }; 278 279 vreg_s4a_1p8: vreg-s4a-1p8 { 280 compatible = "regulator-fixed"; 281 regulator-name = "vreg_s4a_1p8"; 282 regulator-min-microvolt = <1800000>; 283 regulator-max-microvolt = <1800000>; 284 regulator-always-on; 285 }; 286}; 287 288&adsp { 289 status = "okay"; 290 firmware-name = "qcom/sm8250/adsp.mbn"; 291}; 292 293&apps_rsc { 294 regulators-0 { 295 compatible = "qcom,pm8009-1-rpmh-regulators"; 296 qcom,pmic-id = "f"; 297 298 vdd-s1-supply = <&vph_pwr>; 299 vdd-s2-supply = <&vph_pwr>; 300 vdd-l2-supply = <&vreg_s8c_1p3>; 301 vdd-l5-l6-supply = <&vreg_bob>; 302 vdd-l7-supply = <&vreg_s4a_1p8>; 303 304 vreg_s2f_0p95: smps2 { 305 regulator-name = "vreg_s2f_0p95"; 306 regulator-min-microvolt = <900000>; 307 regulator-max-microvolt = <952000>; 308 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 309 }; 310 311 vreg_l1f_1p1: ldo1 { 312 regulator-name = "vreg_l1f_1p1"; 313 regulator-min-microvolt = <1104000>; 314 regulator-max-microvolt = <1104000>; 315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 316 }; 317 318 vreg_l2f_1p2: ldo2 { 319 regulator-name = "vreg_l2f_1p2"; 320 regulator-min-microvolt = <1200000>; 321 regulator-max-microvolt = <1200000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vreg_l6f_2p8: ldo6 { 326 regulator-name = "vreg_l6f_2p8"; 327 regulator-min-microvolt = <2800000>; 328 regulator-max-microvolt = <2800000>; 329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 330 }; 331 332 vreg_l7f_1p8: ldo7 { 333 regulator-name = "vreg_l7f_1p8"; 334 regulator-min-microvolt = <1800000>; 335 regulator-max-microvolt = <1800000>; 336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 337 }; 338 }; 339 340 regulators-1 { 341 compatible = "qcom,pm8150-rpmh-regulators"; 342 qcom,pmic-id = "a"; 343 344 vdd-s1-supply = <&vph_pwr>; 345 vdd-s2-supply = <&vph_pwr>; 346 vdd-s3-supply = <&vph_pwr>; 347 vdd-s4-supply = <&vph_pwr>; 348 vdd-s5-supply = <&vph_pwr>; 349 vdd-s6-supply = <&vph_pwr>; 350 vdd-s7-supply = <&vph_pwr>; 351 vdd-s8-supply = <&vph_pwr>; 352 vdd-s9-supply = <&vph_pwr>; 353 vdd-s10-supply = <&vph_pwr>; 354 vdd-l2-l10-supply = <&vreg_bob>; 355 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; 356 vdd-l6-l9-supply = <&vreg_s8c_1p3>; 357 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; 358 vdd-l13-l16-l17-supply = <&vreg_bob>; 359 360 vreg_l2a_3p1: ldo2 { 361 regulator-name = "vreg_l2a_3p1"; 362 regulator-min-microvolt = <3072000>; 363 regulator-max-microvolt = <3072000>; 364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 365 }; 366 367 vreg_l3a_0p9: ldo3 { 368 regulator-name = "vreg_l3a_0p9"; 369 regulator-min-microvolt = <928000>; 370 regulator-max-microvolt = <932000>; 371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 372 }; 373 374 vreg_l5a_0p88: ldo5 { 375 regulator-name = "vreg_l5a_0p88"; 376 regulator-min-microvolt = <880000>; 377 regulator-max-microvolt = <880000>; 378 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 379 }; 380 381 vreg_l6a_1p2: ldo6 { 382 regulator-name = "vreg_l6a_1p2"; 383 regulator-min-microvolt = <1200000>; 384 regulator-max-microvolt = <1200000>; 385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 386 }; 387 388 vreg_l7a_1p7: ldo7 { 389 regulator-name = "vreg_l7a_1p7"; 390 regulator-min-microvolt = <1704000>; 391 regulator-max-microvolt = <1800000>; 392 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 393 }; 394 395 vreg_l9a_1p2: ldo9 { 396 regulator-name = "vreg_l9a_1p2"; 397 regulator-min-microvolt = <1200000>; 398 regulator-max-microvolt = <1200000>; 399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 400 }; 401 402 vreg_l10a_1p8: ldo10 { 403 regulator-name = "vreg_l10a_1p8"; 404 regulator-min-microvolt = <1800000>; 405 regulator-max-microvolt = <1800000>; 406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 407 }; 408 409 vreg_l12a_1p8: ldo12 { 410 regulator-name = "vreg_l12a_1p8"; 411 regulator-min-microvolt = <1800000>; 412 regulator-max-microvolt = <1800000>; 413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 414 }; 415 416 vreg_l13a_ts_3p0: ldo13 { 417 regulator-name = "vreg_l13a_ts_3p0"; 418 regulator-min-microvolt = <3008000>; 419 regulator-max-microvolt = <3008000>; 420 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 421 }; 422 423 vreg_l14a_1p8: ldo14 { 424 regulator-name = "vreg_l14a_1p8"; 425 regulator-min-microvolt = <1800000>; 426 regulator-max-microvolt = <1880000>; 427 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 428 }; 429 430 vreg_l15a_1p8: ldo15 { 431 regulator-name = "vreg_l15a_1p8"; 432 regulator-min-microvolt = <1800000>; 433 regulator-max-microvolt = <1800000>; 434 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 435 }; 436 437 vreg_l16a_2p7: ldo16 { 438 regulator-name = "vreg_l16a_2p7"; 439 regulator-min-microvolt = <2704000>; 440 regulator-max-microvolt = <2960000>; 441 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 442 }; 443 444 vreg_l17a_3p0: ldo17 { 445 regulator-name = "vreg_l17a_3p0"; 446 regulator-min-microvolt = <2856000>; 447 regulator-max-microvolt = <3008000>; 448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 449 }; 450 451 vreg_l18a_0p92: ldo18 { 452 regulator-name = "vreg_l18a_0p92"; 453 regulator-min-microvolt = <800000>; 454 regulator-max-microvolt = <912000>; 455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 456 }; 457 458 vreg_s5a_1p9: smps5 { 459 regulator-name = "vreg_s5a_1p9"; 460 regulator-min-microvolt = <1904000>; 461 regulator-max-microvolt = <2000000>; 462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 463 }; 464 465 vreg_s6a_0p95: smps6 { 466 regulator-name = "vreg_s6a_0p95"; 467 regulator-min-microvolt = <920000>; 468 regulator-max-microvolt = <1128000>; 469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 470 }; 471 }; 472 473 regulators-2 { 474 compatible = "qcom,pm8150l-rpmh-regulators"; 475 qcom,pmic-id = "c"; 476 477 vdd-s1-supply = <&vph_pwr>; 478 vdd-s2-supply = <&vph_pwr>; 479 vdd-s3-supply = <&vph_pwr>; 480 vdd-s4-supply = <&vph_pwr>; 481 vdd-s5-supply = <&vph_pwr>; 482 vdd-s6-supply = <&vph_pwr>; 483 vdd-s7-supply = <&vph_pwr>; 484 vdd-s8-supply = <&vph_pwr>; 485 vdd-l1-l8-supply = <&vreg_s4a_1p8>; 486 vdd-l2-l3-supply = <&vreg_s8c_1p3>; 487 vdd-l4-l5-l6-supply = <&vreg_bob>; 488 vdd-l7-l11-supply = <&vreg_bob>; 489 vdd-l9-l10-supply = <&vreg_bob>; 490 vdd-bob-supply = <&vph_pwr>; 491 492 vreg_bob: bob { 493 regulator-name = "vreg_bob"; 494 regulator-min-microvolt = <3008000>; 495 regulator-max-microvolt = <4000000>; 496 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 497 }; 498 499 vreg_l1c_1p8: ldo1 { 500 regulator-name = "vreg_l1c_1p8"; 501 regulator-min-microvolt = <1800000>; 502 regulator-max-microvolt = <1800000>; 503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 504 }; 505 506 vreg_l2c_1p2: ldo2 { 507 regulator-name = "vreg_l2c_1p2"; 508 regulator-min-microvolt = <1200000>; 509 regulator-max-microvolt = <1200000>; 510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 511 }; 512 513 vreg_l3c_0p8: ldo3 { 514 regulator-name = "vreg_l3c_0p8"; 515 regulator-min-microvolt = <800000>; 516 regulator-max-microvolt = <800000>; 517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 518 }; 519 520 vreg_l4c_1p7: ldo4 { 521 regulator-name = "vreg_l4c_1p7"; 522 regulator-min-microvolt = <1704000>; 523 regulator-max-microvolt = <2928000>; 524 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 525 }; 526 527 vreg_l5c_1p8: ldo5 { 528 regulator-name = "vreg_l5c_1p8"; 529 regulator-min-microvolt = <1800000>; 530 regulator-max-microvolt = <2928000>; 531 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 532 }; 533 534 vreg_l6c_2p96: ldo6 { 535 regulator-name = "vreg_l6c_2p96"; 536 regulator-min-microvolt = <1800000>; 537 regulator-max-microvolt = <2960000>; 538 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 539 }; 540 541 vreg_l7c_cam_vcm0_2p85: ldo7 { 542 regulator-name = "vreg_l7c_cam_vcm0_2p85"; 543 regulator-min-microvolt = <2856000>; 544 regulator-max-microvolt = <3104000>; 545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 546 }; 547 548 vreg_l8c_1p8: ldo8 { 549 regulator-name = "vreg_l8c_1p8"; 550 regulator-min-microvolt = <1800000>; 551 regulator-max-microvolt = <1800000>; 552 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 553 }; 554 555 vreg_l9c_2p96: ldo9 { 556 regulator-name = "vreg_l9c_2p96"; 557 regulator-min-microvolt = <2704000>; 558 regulator-max-microvolt = <2960000>; 559 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 560 }; 561 562 vreg_l10c_3p0: ldo10 { 563 regulator-name = "vreg_l10c_3p0"; 564 regulator-min-microvolt = <3000000>; 565 regulator-max-microvolt = <3000000>; 566 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 567 }; 568 569 vreg_l11c_3p3: ldo11 { 570 regulator-name = "vreg_l11c_3p3"; 571 regulator-min-microvolt = <3296000>; 572 regulator-max-microvolt = <3296000>; 573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 574 regulator-always-on; 575 }; 576 577 vreg_s8c_1p3: smps8 { 578 regulator-name = "vreg_s8c_1p3"; 579 regulator-min-microvolt = <1352000>; 580 regulator-max-microvolt = <1352000>; 581 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 582 }; 583 }; 584}; 585 586&cdsp { 587 status = "okay"; 588 firmware-name = "qcom/sm8250/cdsp.mbn"; 589}; 590 591&gmu { 592 status = "okay"; 593}; 594 595&gpu { 596 status = "okay"; 597 598 zap-shader { 599 memory-region = <&gpu_mem>; 600 firmware-name = "qcom/sm8250/a650_zap.mbn"; 601 }; 602}; 603 604/* LS-I2C0 */ 605&i2c4 { 606 status = "okay"; 607}; 608 609&i2c5 { 610 status = "okay"; 611 clock-frequency = <400000>; 612 613 lt9611_codec: hdmi-bridge@2b { 614 compatible = "lontium,lt9611uxc"; 615 reg = <0x2b>; 616 #sound-dai-cells = <1>; 617 618 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; 619 620 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>; 621 622 vdd-supply = <<9611_1v2>; 623 vcc-supply = <<9611_3v3>; 624 625 pinctrl-names = "default"; 626 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; 627 628 ports { 629 #address-cells = <1>; 630 #size-cells = <0>; 631 632 port@0 { 633 reg = <0>; 634 635 lt9611_a: endpoint { 636 remote-endpoint = <&mdss_dsi0_out>; 637 }; 638 }; 639 640#if 0 641 port@1 { 642 reg = <1>; 643 644 lt9611_b: endpoint { 645 remote-endpoint = <&mdss_dsi1_out>; 646 }; 647 }; 648#endif 649 650 port@2 { 651 reg = <2>; 652 653 lt9611_out: endpoint { 654 remote-endpoint = <&hdmi_con>; 655 }; 656 }; 657 658 }; 659 }; 660}; 661 662/* LS-I2C1 */ 663&i2c15 { 664 status = "okay"; 665 666 typec-mux@1c { 667 compatible = "onnn,nb7vpq904m"; 668 reg = <0x1c>; 669 670 vcc-supply = <&vreg_s4a_1p8>; 671 672 retimer-switch; 673 orientation-switch; 674 675 ports { 676 #address-cells = <1>; 677 #size-cells = <0>; 678 679 port@0 { 680 reg = <0>; 681 682 redriver_usb_con_ss: endpoint { 683 remote-endpoint = <&pm8150b_typec_mux_in>; 684 }; 685 }; 686 687 port@1 { 688 reg = <1>; 689 690 redriver_phy_con_ss: endpoint { 691 remote-endpoint = <&usb_1_qmpphy_out>; 692 data-lanes = <0 1 2 3>; 693 }; 694 }; 695 696 port@2 { 697 reg = <2>; 698 699 redriver_usb_con_sbu: endpoint { 700 remote-endpoint = <&pm8150b_typec_sbu_out>; 701 }; 702 }; 703 }; 704 }; 705}; 706 707&mdss { 708 status = "okay"; 709}; 710 711&mdss_dp { 712 status = "okay"; 713}; 714 715&mdss_dp_out { 716 data-lanes = <0 1>; 717 remote-endpoint = <&usb_1_qmpphy_dp_in>; 718}; 719 720&mdss_dsi0 { 721 status = "okay"; 722 vdda-supply = <&vreg_l9a_1p2>; 723 724#if 0 725 qcom,dual-dsi-mode; 726 qcom,master-dsi; 727#endif 728 729 ports { 730 port@1 { 731 endpoint { 732 remote-endpoint = <<9611_a>; 733 data-lanes = <0 1 2 3>; 734 }; 735 }; 736 }; 737}; 738 739&mdss_dsi0_phy { 740 status = "okay"; 741 vdds-supply = <&vreg_l5a_0p88>; 742}; 743 744&pm8150_adc { 745 channel@4c { 746 reg = <ADC5_XO_THERM_100K_PU>; 747 qcom,ratiometric; 748 qcom,hw-settle-time = <200>; 749 label = "xo_therm"; 750 }; 751 752 channel@4e { 753 reg = <ADC5_AMUX_THM2_100K_PU>; 754 qcom,ratiometric; 755 qcom,hw-settle-time = <200>; 756 label = "wifi_therm"; 757 }; 758}; 759 760&pm8150_adc_tm { 761 status = "okay"; 762 763 xo-therm@0 { 764 reg = <0>; 765 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>; 766 qcom,ratiometric; 767 qcom,hw-settle-time-us = <200>; 768 }; 769 770 wifi-therm@1 { 771 reg = <1>; 772 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>; 773 qcom,ratiometric; 774 qcom,hw-settle-time-us = <200>; 775 }; 776}; 777 778&pcie0 { 779 status = "okay"; 780}; 781 782&pcie0_phy { 783 status = "okay"; 784 vdda-phy-supply = <&vreg_l5a_0p88>; 785 vdda-pll-supply = <&vreg_l9a_1p2>; 786}; 787 788&pcieport0 { 789 wifi@0 { 790 compatible = "pci17cb,1101"; 791 reg = <0x10000 0x0 0x0 0x0 0x0>; 792 793 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 794 vddaon-supply = <&vreg_pmu_aon_0p59>; 795 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 796 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 797 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 798 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 799 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; 800 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 801 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 802 }; 803}; 804 805&pcie1 { 806 status = "okay"; 807}; 808 809&pcie1_phy { 810 status = "okay"; 811 vdda-phy-supply = <&vreg_l5a_0p88>; 812 vdda-pll-supply = <&vreg_l9a_1p2>; 813}; 814 815&pcie2 { 816 status = "okay"; 817}; 818 819&pcie2_phy { 820 status = "okay"; 821 vdda-phy-supply = <&vreg_l5a_0p88>; 822 vdda-pll-supply = <&vreg_l9a_1p2>; 823}; 824 825&pm8150_gpios { 826 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; 827 gpio-line-names = 828 "NC", 829 "OPTION2", 830 "PM_GPIO-F", 831 "PM_SLP_CLK_IN", 832 "OPTION1", 833 "VOL_UP_N", 834 "PM8250_GPIO7", /* Blue LED */ 835 "SP_ARI_PWR_ALARM", 836 "GPIO_9_P", /* Yellow LED */ 837 "GPIO_10_P"; /* Green LED */ 838}; 839 840&pm8150b_adc { 841 channel@4f { 842 reg = <ADC5_AMUX_THM3_100K_PU>; 843 qcom,ratiometric; 844 qcom,hw-settle-time = <200>; 845 label = "conn_therm"; 846 }; 847}; 848 849&pm8150b_adc_tm { 850 status = "okay"; 851 852 conn-therm@0 { 853 reg = <0>; 854 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>; 855 qcom,ratiometric; 856 qcom,hw-settle-time-us = <200>; 857 }; 858}; 859 860&pm8150b_gpios { 861 gpio-line-names = 862 "NC", 863 "NC", 864 "NC", 865 "NC", 866 "HAP_BOOST_EN", /* SOM */ 867 "SMB_STAT", /* SOM */ 868 "NC", 869 "NC", 870 "SDM_FORCE_USB_BOOT", 871 "NC", 872 "NC", 873 "NC"; 874}; 875 876&pm8150l_adc { 877 channel@4e { 878 reg = <ADC5_AMUX_THM2_100K_PU>; 879 qcom,ratiometric; 880 qcom,hw-settle-time = <200>; 881 label = "skin_msm_therm"; 882 }; 883 884 channel@4f { 885 reg = <ADC5_AMUX_THM3_100K_PU>; 886 qcom,ratiometric; 887 qcom,hw-settle-time = <200>; 888 label = "pm8150l_therm"; 889 }; 890}; 891 892&pm8150l_adc_tm { 893 status = "okay"; 894 895 skin-msm-therm@0 { 896 reg = <0>; 897 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>; 898 qcom,ratiometric; 899 qcom,hw-settle-time-us = <200>; 900 }; 901 902 pm8150l-therm@1 { 903 reg = <1>; 904 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>; 905 qcom,ratiometric; 906 qcom,hw-settle-time-us = <200>; 907 }; 908}; 909 910&pm8150l_gpios { 911 gpio-line-names = 912 "NC", 913 "PM3003A_EN", 914 "NC", 915 "NC", 916 "PM_GPIO5", /* HDMI RST_N */ 917 "PM_GPIO-A", /* PWM */ 918 "PM_GPIO7", 919 "NC", 920 "NC", 921 "PM_GPIO-B", 922 "NC", 923 "PM3003A_MODE"; 924 925 lt9611_rst_pin: lt9611-rst-state { 926 pins = "gpio5"; 927 function = "normal"; 928 929 output-high; 930 input-disable; 931 power-source = <0>; 932 }; 933}; 934 935&pm8150l_lpg { 936 status = "okay"; 937 938 #address-cells = <1>; 939 #size-cells = <0>; 940 941 led@1 { 942 reg = <1>; 943 color = <LED_COLOR_ID_GREEN>; 944 function = LED_FUNCTION_HEARTBEAT; 945 function-enumerator = <3>; 946 947 linux,default-trigger = "heartbeat"; 948 default-state = "on"; 949 }; 950 951 led@2 { 952 reg = <2>; 953 color = <LED_COLOR_ID_GREEN>; 954 function = LED_FUNCTION_INDICATOR; 955 function-enumerator = <2>; 956 default-state = "on"; 957 }; 958 959 led@3 { 960 reg = <3>; 961 color = <LED_COLOR_ID_GREEN>; 962 function = LED_FUNCTION_INDICATOR; 963 function-enumerator = <1>; 964 }; 965}; 966 967&pon { 968 mode-bootloader = <0x2>; 969 mode-recovery = <0x1>; 970}; 971 972&pon_pwrkey { 973 status = "okay"; 974}; 975 976&pon_resin { 977 status = "okay"; 978 979 linux,code = <KEY_VOLUMEDOWN>; 980}; 981 982&qupv3_id_0 { 983 status = "okay"; 984}; 985 986&qupv3_id_1 { 987 status = "okay"; 988}; 989 990&qupv3_id_2 { 991 status = "okay"; 992}; 993 994&q6afedai { 995 dai@16 { 996 reg = <PRIMARY_MI2S_RX>; 997 qcom,sd-lines = <0 1 2 3>; 998 }; 999}; 1000 1001/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */ 1002&q6afedai { 1003 dai@20 { 1004 reg = <TERTIARY_MI2S_RX>; 1005 qcom,sd-lines = <0>; 1006 }; 1007}; 1008 1009&q6asmdai { 1010 dai@0 { 1011 reg = <0>; 1012 }; 1013 1014 dai@1 { 1015 reg = <1>; 1016 }; 1017 1018 dai@2 { 1019 reg = <2>; 1020 }; 1021}; 1022 1023&sdhc_2 { 1024 status = "okay"; 1025 pinctrl-names = "default"; 1026 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; 1027 vmmc-supply = <&vreg_l9c_2p96>; 1028 vqmmc-supply = <&vreg_l6c_2p96>; 1029 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; 1030 bus-width = <4>; 1031 no-sdio; 1032 no-mmc; 1033}; 1034 1035&sound { 1036 compatible = "qcom,qrb5165-rb5-sndcard"; 1037 pinctrl-0 = <&tert_mi2s_active>; 1038 pinctrl-names = "default"; 1039 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0"; 1040 audio-routing = 1041 "SpkrLeft IN", "WSA_SPK1 OUT", 1042 "SpkrRight IN", "WSA_SPK2 OUT", 1043 "VA DMIC0", "vdd-micb", 1044 "VA DMIC1", "vdd-micb", 1045 "MM_DL1", "MultiMedia1 Playback", 1046 "MM_DL2", "MultiMedia2 Playback", 1047 "MultiMedia3 Capture", "MM_UL3"; 1048 1049 mm1-dai-link { 1050 link-name = "MultiMedia1"; 1051 cpu { 1052 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 1053 }; 1054 }; 1055 1056 mm2-dai-link { 1057 link-name = "MultiMedia2"; 1058 cpu { 1059 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 1060 }; 1061 }; 1062 1063 mm3-dai-link { 1064 link-name = "MultiMedia3"; 1065 cpu { 1066 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 1067 }; 1068 }; 1069 1070 hdmi-dai-link { 1071 link-name = "HDMI Playback"; 1072 cpu { 1073 sound-dai = <&q6afedai TERTIARY_MI2S_RX>; 1074 }; 1075 1076 platform { 1077 sound-dai = <&q6routing>; 1078 }; 1079 1080 codec { 1081 sound-dai = <<9611_codec 0>; 1082 }; 1083 }; 1084 1085 dma-dai-link { 1086 link-name = "WSA Playback"; 1087 cpu { 1088 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>; 1089 }; 1090 1091 platform { 1092 sound-dai = <&q6routing>; 1093 }; 1094 1095 codec { 1096 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; 1097 }; 1098 }; 1099 1100 va-dai-link { 1101 link-name = "VA Capture"; 1102 cpu { 1103 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>; 1104 }; 1105 1106 platform { 1107 sound-dai = <&q6routing>; 1108 }; 1109 1110 codec { 1111 sound-dai = <&vamacro 0>; 1112 }; 1113 }; 1114}; 1115 1116/* CAN */ 1117&spi0 { 1118 status = "okay"; 1119 pinctrl-names = "default"; 1120 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>; 1121 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; 1122 1123 can@0 { 1124 compatible = "microchip,mcp2518fd"; 1125 reg = <0>; 1126 clocks = <&clk40m>; 1127 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>; 1128 spi-max-frequency = <10000000>; 1129 vdd-supply = <&vdc_5v>; 1130 xceiver-supply = <&vdc_5v>; 1131 }; 1132}; 1133 1134&swr0 { 1135 status = "okay"; 1136 1137 left_spkr: speaker@0,3 { 1138 compatible = "sdw10217211000"; 1139 reg = <0 3>; 1140 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; 1141 #thermal-sensor-cells = <0>; 1142 sound-name-prefix = "SpkrLeft"; 1143 #sound-dai-cells = <0>; 1144 }; 1145 1146 right_spkr: speaker@0,4 { 1147 compatible = "sdw10217211000"; 1148 reg = <0 4>; 1149 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; 1150 #thermal-sensor-cells = <0>; 1151 sound-name-prefix = "SpkrRight"; 1152 #sound-dai-cells = <0>; 1153 }; 1154}; 1155 1156&tlmm { 1157 gpio-reserved-ranges = <40 4>; 1158 gpio-line-names = 1159 "GPIO-MM", 1160 "GPIO-NN", 1161 "GPIO-OO", 1162 "GPIO-PP", 1163 "GPIO-A", 1164 "GPIO-C", 1165 "GPIO-E", 1166 "GPIO-D", 1167 "I2C0-SDA", 1168 "I2C0-SCL", 1169 "GPIO-TT", /* GPIO_10 */ 1170 "NC", 1171 "GPIO_12_I2C_SDA", 1172 "GPIO_13_I2C_SCL", 1173 "GPIO-X", 1174 "GPIO_15_RGMII_INT", 1175 "HST_BT_UART_CTS", 1176 "HST_BT_UART_RFR", 1177 "HST_BT_UART_TX", 1178 "HST_BT_UART_RX", 1179 "HST_WLAN_EN", /* GPIO_20 */ 1180 "HST_BT_EN", 1181 "GPIO-AAA", 1182 "GPIO-BBB", 1183 "GPIO-CCC", 1184 "GPIO-Z", 1185 "GPIO-DDD", 1186 "GPIO-BB", 1187 "GPIO_28_CAN_SPI_MISO", 1188 "GPIO_29_CAN_SPI_MOSI", 1189 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */ 1190 "GPIO_31_CAN_SPI_CS", 1191 "GPIO-UU", 1192 "NC", 1193 "UART1_TXD_SOM", 1194 "UART1_RXD_SOM", 1195 "UART0_CTS", 1196 "UART0_RTS", 1197 "UART0_TXD", 1198 "UART0_RXD", 1199 "SPI1_MISO", /* GPIO_40 */ 1200 "SPI1_MOSI", 1201 "SPI1_CLK", 1202 "SPI1_CS", 1203 "I2C1_SDA", 1204 "I2C1_SCL", 1205 "GPIO-F", 1206 "GPIO-JJ", 1207 "Board_ID1", 1208 "Board_ID2", 1209 "NC", /* GPIO_50 */ 1210 "NC", 1211 "SPI0_MISO", 1212 "SPI0_MOSI", 1213 "SPI0_SCLK", 1214 "SPI0_CS", 1215 "GPIO-QQ", 1216 "GPIO-RR", 1217 "USB2LAN_RESET", 1218 "USB2LAN_EXTWAKE", 1219 "NC", /* GPIO_60 */ 1220 "NC", 1221 "NC", 1222 "LT9611_INT", 1223 "GPIO-AA", 1224 "USB_CC_DIR", 1225 "GPIO-G", 1226 "GPIO-LL", 1227 "USB_DP_HPD_1P8", 1228 "NC", 1229 "NC", /* GPIO_70 */ 1230 "SD_CMD", 1231 "SD_DAT3", 1232 "SD_SCLK", 1233 "SD_DAT2", 1234 "SD_DAT1", 1235 "SD_DAT0", /* BOOT_CFG3 */ 1236 "SD_UFS_CARD_DET_N", 1237 "GPIO-II", 1238 "PCIE0_RST_N", 1239 "PCIE0_CLK_REQ_N", /* GPIO_80 */ 1240 "PCIE0_WAKE_N", 1241 "GPIO-CC", 1242 "GPIO-DD", 1243 "GPIO-EE", 1244 "GPIO-FF", 1245 "GPIO-GG", 1246 "GPIO-HH", 1247 "GPIO-VV", 1248 "GPIO-WW", 1249 "NC", /* GPIO_90 */ 1250 "NC", 1251 "GPIO-K", 1252 "GPIO-I", 1253 "CSI0_MCLK", 1254 "CSI1_MCLK", 1255 "CSI2_MCLK", 1256 "CSI3_MCLK", 1257 "GPIO-AA", /* CSI4_MCLK */ 1258 "GPIO-BB", /* CSI5_MCLK */ 1259 "GPIO-KK", /* GPIO_100 */ 1260 "CCI_I2C_SDA0", 1261 "CCI_I2C_SCL0", 1262 "CCI_I2C_SDA1", 1263 "CCI_I2C_SCL1", 1264 "CCI_I2C_SDA2", 1265 "CCI_I2C_SCL2", 1266 "CCI_I2C_SDA3", 1267 "CCI_I2C_SCL3", 1268 "GPIO-L", 1269 "NC", /* GPIO_110 */ 1270 "NC", 1271 "ACCEL_INT", 1272 "GYRO_INT", 1273 "GPIO-J", 1274 "GPIO-YY", 1275 "GPIO-H", 1276 "GPIO-ZZ", 1277 "NC", 1278 "NC", 1279 "NC", /* GPIO_120 */ 1280 "NC", 1281 "MAG_INT", 1282 "MAG_DRDY_INT", 1283 "HST_SW_CTRL", 1284 "GPIO-M", 1285 "GPIO-N", 1286 "GPIO-O", 1287 "GPIO-P", 1288 "PS_INT", 1289 "WSA1_EN", /* GPIO_130 */ 1290 "USB_HUB_RESET", 1291 "SDM_FORCE_USB_BOOT", 1292 "I2S1_CLK_HDMI", 1293 "I2S1_DATA0_HDMI", 1294 "I2S1_WS_HDMI", 1295 "GPIO-B", 1296 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */ 1297 "PCM_CLK", 1298 "PCM_DI", 1299 "PCM_DO", /* GPIO_140 */ 1300 "PCM_FS", 1301 "HST_SLIM_CLK", 1302 "HST_SLIM_DATA", 1303 "GPIO-U", 1304 "GPIO-Y", 1305 "GPIO-R", 1306 "GPIO-Q", 1307 "GPIO-S", 1308 "GPIO-T", 1309 "GPIO-V", /* GPIO_150 */ 1310 "GPIO-W", 1311 "DMIC_CLK1", 1312 "DMIC_DATA1", 1313 "DMIC_CLK2", 1314 "DMIC_DATA2", 1315 "WSA_SWR_CLK", 1316 "WSA_SWR_DATA", 1317 "DMIC_CLK3", 1318 "DMIC_DATA3", 1319 "I2C4_SDA", /* GPIO_160 */ 1320 "I2C4_SCL", 1321 "SPI3_CS1", 1322 "SPI3_CS2", 1323 "SPI2_MISO_LS3", 1324 "SPI2_MOSI_LS3", 1325 "SPI2_CLK_LS3", 1326 "SPI2_ACCEL_CS_LS3", 1327 "SPI2_CS1", 1328 "NC", 1329 "GPIO-SS", /* GPIO_170 */ 1330 "GPIO-XX", 1331 "SPI3_MISO", 1332 "SPI3_MOSI", 1333 "SPI3_CLK", 1334 "SPI3_CS", 1335 "HST_BLE_SNS_UART_TX", 1336 "HST_BLE_SNS_UART_RX", 1337 "HST_WLAN_UART_TX", 1338 "HST_WLAN_UART_RX"; 1339 1340 bt_en_state: bt-default-state { 1341 pins = "gpio21"; 1342 function = "gpio"; 1343 drive-strength = <16>; 1344 output-low; 1345 bias-pull-up; 1346 }; 1347 1348 lt9611_irq_pin: lt9611-irq-state { 1349 pins = "gpio63"; 1350 function = "gpio"; 1351 bias-disable; 1352 }; 1353 1354 sdc2_default_state: sdc2-default-state { 1355 clk-pins { 1356 pins = "sdc2_clk"; 1357 bias-disable; 1358 drive-strength = <16>; 1359 }; 1360 1361 cmd-pins { 1362 pins = "sdc2_cmd"; 1363 bias-pull-up; 1364 drive-strength = <10>; 1365 }; 1366 1367 data-pins { 1368 pins = "sdc2_data"; 1369 bias-pull-up; 1370 drive-strength = <10>; 1371 }; 1372 }; 1373 1374 sdc2_card_det_n: sd-card-det-n-state { 1375 pins = "gpio77"; 1376 function = "gpio"; 1377 bias-pull-up; 1378 }; 1379 1380 wlan_en_state: wlan-default-state { 1381 pins = "gpio20"; 1382 function = "gpio"; 1383 drive-strength = <16>; 1384 output-low; 1385 bias-pull-up; 1386 }; 1387}; 1388 1389&uart6 { 1390 status = "okay"; 1391 1392 bluetooth { 1393 compatible = "qcom,qca6390-bt"; 1394 1395 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 1396 vddaon-supply = <&vreg_pmu_aon_0p59>; 1397 vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; 1398 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1399 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1400 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; 1401 }; 1402}; 1403 1404&uart12 { 1405 status = "okay"; 1406}; 1407 1408&ufs_mem_hc { 1409 status = "okay"; 1410 1411 vcc-supply = <&vreg_l17a_3p0>; 1412 vcc-max-microamp = <800000>; 1413 vccq-supply = <&vreg_l6a_1p2>; 1414 vccq-max-microamp = <800000>; 1415 vccq2-supply = <&vreg_s4a_1p8>; 1416 vccq2-max-microamp = <800000>; 1417}; 1418 1419&ufs_mem_phy { 1420 status = "okay"; 1421 1422 vdda-phy-supply = <&vreg_l5a_0p88>; 1423 vdda-pll-supply = <&vreg_l9a_1p2>; 1424}; 1425 1426&usb_1 { 1427 status = "okay"; 1428}; 1429 1430&usb_1_dwc3 { 1431 dr_mode = "otg"; 1432 usb-role-switch; 1433}; 1434 1435&usb_1_dwc3_hs_out { 1436 remote-endpoint = <&pm8150b_hs_in>; 1437}; 1438 1439&usb_1_hsphy { 1440 status = "okay"; 1441 1442 vdda-pll-supply = <&vreg_l5a_0p88>; 1443 vdda33-supply = <&vreg_l2a_3p1>; 1444 vdda18-supply = <&vreg_l12a_1p8>; 1445}; 1446 1447&usb_1_qmpphy { 1448 status = "okay"; 1449 1450 vdda-phy-supply = <&vreg_l9a_1p2>; 1451 vdda-pll-supply = <&vreg_l18a_0p92>; 1452}; 1453 1454&usb_1_qmpphy_out { 1455 remote-endpoint = <&redriver_phy_con_ss>; 1456}; 1457 1458&usb_2 { 1459 status = "okay"; 1460}; 1461 1462&usb_2_dwc3 { 1463 dr_mode = "host"; 1464}; 1465 1466&usb_2_hsphy { 1467 status = "okay"; 1468 1469 vdda-pll-supply = <&vreg_l5a_0p88>; 1470 vdda33-supply = <&vreg_l2a_3p1>; 1471 vdda18-supply = <&vreg_l12a_1p8>; 1472}; 1473 1474&usb_2_qmpphy { 1475 status = "okay"; 1476 1477 vdda-phy-supply = <&vreg_l9a_1p2>; 1478 vdda-pll-supply = <&vreg_l18a_0p92>; 1479}; 1480 1481&vamacro { 1482 pinctrl-0 = <&dmic01_active>; 1483 pinctrl-names = "default"; 1484 vdd-micb-supply = <&vreg_s4a_1p8>; 1485 qcom,dmic-sample-rate = <600000>; 1486}; 1487 1488&venus { 1489 status = "okay"; 1490}; 1491 1492&wsamacro { 1493 status = "okay"; 1494}; 1495 1496/* PINCTRL - additions to nodes defined in sm8250.dtsi */ 1497&qup_spi0_cs_gpio { 1498 drive-strength = <6>; 1499 bias-disable; 1500}; 1501 1502&qup_spi0_data_clk { 1503 drive-strength = <6>; 1504 bias-disable; 1505}; 1506 1507&pm8150b_vbus { 1508 regulator-min-microamp = <500000>; 1509 regulator-max-microamp = <3000000>; 1510 status = "okay"; 1511}; 1512 1513&pm8150b_typec { 1514 status = "okay"; 1515 1516 vdd-pdphy-supply = <&vreg_l2a_3p1>; 1517 1518 connector { 1519 compatible = "usb-c-connector"; 1520 1521 power-role = "source"; 1522 data-role = "dual"; 1523 self-powered; 1524 1525 source-pdos = <PDO_FIXED(5000, 3000, 1526 PDO_FIXED_DUAL_ROLE | 1527 PDO_FIXED_USB_COMM | 1528 PDO_FIXED_DATA_SWAP)>; 1529 1530 altmodes { 1531 displayport { 1532 svid = /bits/ 16 <0xff01>; 1533 vdo = <0x00001c46>; 1534 }; 1535 }; 1536 1537 ports { 1538 #address-cells = <1>; 1539 #size-cells = <0>; 1540 1541 port@0 { 1542 reg = <0>; 1543 pm8150b_hs_in: endpoint { 1544 remote-endpoint = <&usb_1_dwc3_hs_out>; 1545 }; 1546 }; 1547 1548 port@1 { 1549 reg = <1>; 1550 pm8150b_typec_mux_in: endpoint { 1551 remote-endpoint = <&redriver_usb_con_ss>; 1552 }; 1553 }; 1554 1555 port@2 { 1556 reg = <2>; 1557 1558 pm8150b_typec_sbu_out: endpoint { 1559 remote-endpoint = <&redriver_usb_con_sbu>; 1560 }; 1561 }; 1562 }; 1563 }; 1564}; 1565 1566&usb_1_qmpphy_dp_in { 1567 remote-endpoint = <&mdss_dp_out>; 1568}; 1569