1 /** 2 ****************************************************************************** 3 * @file stm32wbxx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration file. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef __STM32WBxx_HAL_CONF_H 22 #define __STM32WBxx_HAL_CONF_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Exported types ------------------------------------------------------------*/ 29 /* Exported constants --------------------------------------------------------*/ 30 31 /* ########################## Module Selection ############################## */ 32 /** 33 * @brief This is the list of modules to be used in the HAL driver 34 */ 35 #define HAL_MODULE_ENABLED 36 /*#define HAL_ADC_MODULE_ENABLED */ 37 /*#define HAL_CRYP_MODULE_ENABLED */ 38 /*#define HAL_COMP_MODULE_ENABLED */ 39 /*#define HAL_CRC_MODULE_ENABLED */ 40 //#define HAL_HSEM_MODULE_ENABLED 41 /*#define HAL_I2C_MODULE_ENABLED */ 42 #define HAL_IPCC_MODULE_ENABLED 43 /*#define HAL_IRDA_MODULE_ENABLED */ 44 /*#define HAL_IWDG_MODULE_ENABLED */ 45 /*#define HAL_LCD_MODULE_ENABLED */ 46 /*#define HAL_LPTIM_MODULE_ENABLED */ 47 /*#define HAL_PCD_MODULE_ENABLED */ 48 /*#define HAL_PKA_MODULE_ENABLED */ 49 /*#define HAL_QSPI_MODULE_ENABLED */ 50 /*#define HAL_RNG_MODULE_ENABLED */ 51 #define HAL_RTC_MODULE_ENABLED 52 /*#define HAL_SAI_MODULE_ENABLED */ 53 /*#define HAL_SMBUS_MODULE_ENABLED */ 54 /*#define HAL_SMARTCARD_MODULE_ENABLED */ 55 /*#define HAL_SPI_MODULE_ENABLED */ 56 #define HAL_TIM_MODULE_ENABLED 57 /*#define HAL_TSC_MODULE_ENABLED */ 58 #define HAL_UART_MODULE_ENABLED 59 /*#define HAL_USART_MODULE_ENABLED */ 60 /*#define HAL_WWDG_MODULE_ENABLED */ 61 #define HAL_CORTEX_MODULE_ENABLED 62 #define HAL_DMA_MODULE_ENABLED 63 #define HAL_FLASH_MODULE_ENABLED 64 #define HAL_GPIO_MODULE_ENABLED 65 #define HAL_PWR_MODULE_ENABLED 66 #define HAL_RCC_MODULE_ENABLED 67 68 #define USE_HAL_ADC_REGISTER_CALLBACKS 0u 69 #define USE_HAL_COMP_REGISTER_CALLBACKS 0u 70 #define USE_HAL_CRYP_REGISTER_CALLBACKS 0u 71 #define USE_HAL_I2C_REGISTER_CALLBACKS 0u 72 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0u 73 #define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u 74 #define USE_HAL_PCD_REGISTER_CALLBACKS 0u 75 #define USE_HAL_PKA_REGISTER_CALLBACKS 0u 76 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0u 77 #define USE_HAL_RNG_REGISTER_CALLBACKS 0u 78 #define USE_HAL_RTC_REGISTER_CALLBACKS 0u 79 #define USE_HAL_SAI_REGISTER_CALLBACKS 0u 80 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u 81 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u 82 #define USE_HAL_SPI_REGISTER_CALLBACKS 0u 83 #define USE_HAL_TIM_REGISTER_CALLBACKS 0u 84 #define USE_HAL_TSC_REGISTER_CALLBACKS 0u 85 #define USE_HAL_UART_REGISTER_CALLBACKS 0u 86 #define USE_HAL_USART_REGISTER_CALLBACKS 0u 87 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0u 88 89 /* ########################## Oscillator Values adaptation ####################*/ 90 /** 91 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 92 * This value is used by the RCC HAL module to compute the system frequency 93 * (when HSE is used as system clock source, directly or through the PLL). 94 */ 95 #if !defined (HSE_VALUE) 96 #define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */ 97 #endif /* HSE_VALUE */ 98 99 #if !defined (HSE_STARTUP_TIMEOUT) 100 #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ 101 #endif /* HSE_STARTUP_TIMEOUT */ 102 103 /** 104 * @brief Internal Multiple Speed oscillator (MSI) default value. 105 * This value is the default MSI range value after Reset. 106 */ 107 #if !defined (MSI_VALUE) 108 #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ 109 #endif /* MSI_VALUE */ 110 111 /** 112 * @brief Internal High Speed oscillator (HSI) value. 113 * This value is used by the RCC HAL module to compute the system frequency 114 * (when HSI is used as system clock source, directly or through the PLL). 115 */ 116 #if !defined (HSI_VALUE) 117 #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ 118 #endif /* HSI_VALUE */ 119 120 /** 121 * @brief Internal Low Speed oscillator (LSI1) value. 122 */ 123 #if !defined (LSI1_VALUE) 124 #define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/ 125 #endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 126 The real value may vary depending on the variations 127 in voltage and temperature.*/ 128 /** 129 * @brief Internal Low Speed oscillator (LSI2) value. 130 */ 131 #if !defined (LSI2_VALUE) 132 #define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/ 133 #endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 134 The real value may vary depending on the variations 135 in voltage and temperature.*/ 136 137 /** 138 * @brief External Low Speed oscillator (LSE) value. 139 * This value is used by the UART, RTC HAL module to compute the system frequency 140 */ 141 #if !defined (LSE_VALUE) 142 #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ 143 #endif /* LSE_VALUE */ 144 145 /** 146 * @brief Internal Multiple Speed oscillator (HSI48) default value. 147 * This value is the default HSI48 range value after Reset. 148 */ 149 #if !defined (HSI48_VALUE) 150 #define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/ 151 #endif /* HSI48_VALUE */ 152 153 #if !defined (LSE_STARTUP_TIMEOUT) 154 #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ 155 #endif /* HSE_STARTUP_TIMEOUT */ 156 157 /** 158 * @brief External clock source for SAI1 peripheral 159 * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source 160 * frequency. 161 */ 162 #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) 163 #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/ 164 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */ 165 166 /* Tip: To avoid modifying this file each time you need to use different HSE, 167 === you can define the HSE value in your toolchain compiler preprocessor. */ 168 169 /* ########################### System Configuration ######################### */ 170 /** 171 * @brief This is the HAL system configuration section 172 */ 173 174 #define VDD_VALUE 3300U /*!< Value of VDD in mv */ 175 #define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ 176 #define USE_RTOS 0U 177 #define PREFETCH_ENABLE 1U 178 #define INSTRUCTION_CACHE_ENABLE 1U 179 #define DATA_CACHE_ENABLE 1U 180 181 /* ########################## Assert Selection ############################## */ 182 /** 183 * @brief Uncomment the line below to expanse the "assert_param" macro in the 184 * HAL drivers code 185 */ 186 /* #define USE_FULL_ASSERT 1U */ 187 188 /* ################## SPI peripheral configuration ########################## */ 189 190 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver 191 * Activated: CRC code is present inside driver 192 * Deactivated: CRC code cleaned from driver 193 */ 194 195 #define USE_SPI_CRC 0U 196 197 /* Includes ------------------------------------------------------------------*/ 198 /** 199 * @brief Include module's header file 200 */ 201 #ifdef HAL_DMA_MODULE_ENABLED 202 #include "stm32wbxx_hal_dma.h" 203 #endif /* HAL_DMA_MODULE_ENABLED */ 204 205 #ifdef HAL_ADC_MODULE_ENABLED 206 #include "stm32wbxx_hal_adc.h" 207 #endif /* HAL_ADC_MODULE_ENABLED */ 208 209 #ifdef HAL_COMP_MODULE_ENABLED 210 #include "stm32wbxx_hal_comp.h" 211 #endif /* HAL_COMP_MODULE_ENABLED */ 212 213 #ifdef HAL_CORTEX_MODULE_ENABLED 214 #include "stm32wbxx_hal_cortex.h" 215 #endif /* HAL_CORTEX_MODULE_ENABLED */ 216 217 #ifdef HAL_CRC_MODULE_ENABLED 218 #include "stm32wbxx_hal_crc.h" 219 #endif /* HAL_CRC_MODULE_ENABLED */ 220 221 #ifdef HAL_CRYP_MODULE_ENABLED 222 #include "stm32wbxx_hal_cryp.h" 223 #endif /* HAL_CRYP_MODULE_ENABLED */ 224 225 #ifdef HAL_FLASH_MODULE_ENABLED 226 #include "stm32wbxx_hal_flash.h" 227 #endif /* HAL_FLASH_MODULE_ENABLED */ 228 229 #ifdef HAL_GPIO_MODULE_ENABLED 230 #include "stm32wbxx_hal_gpio.h" 231 #endif /* HAL_GPIO_MODULE_ENABLED */ 232 233 #ifdef HAL_HSEM_MODULE_ENABLED 234 #include "stm32wbxx_hal_hsem.h" 235 #endif /* HAL_HSEM_MODULE_ENABLED */ 236 237 #ifdef HAL_I2C_MODULE_ENABLED 238 #include "stm32wbxx_hal_i2c.h" 239 #endif /* HAL_I2C_MODULE_ENABLED */ 240 241 #ifdef HAL_IPCC_MODULE_ENABLED 242 #include "stm32wbxx_hal_ipcc.h" 243 #endif /* HAL_IPCC_MODULE_ENABLED */ 244 245 #ifdef HAL_IRDA_MODULE_ENABLED 246 #include "stm32wbxx_hal_irda.h" 247 #endif /* HAL_IRDA_MODULE_ENABLED */ 248 249 #ifdef HAL_IWDG_MODULE_ENABLED 250 #include "stm32wbxx_hal_iwdg.h" 251 #endif /* HAL_IWDG_MODULE_ENABLED */ 252 253 #ifdef HAL_LCD_MODULE_ENABLED 254 #include "stm32wbxx_hal_lcd.h" 255 #endif /* HAL_LCD_MODULE_ENABLED */ 256 257 #ifdef HAL_LPTIM_MODULE_ENABLED 258 #include "stm32wbxx_hal_lptim.h" 259 #endif /* HAL_LPTIM_MODULE_ENABLED */ 260 261 #ifdef HAL_PCD_MODULE_ENABLED 262 #include "stm32wbxx_hal_pcd.h" 263 #endif /* HAL_PCD_MODULE_ENABLED */ 264 265 #ifdef HAL_PKA_MODULE_ENABLED 266 #include "stm32wbxx_hal_pka.h" 267 #endif /* HAL_PKA_MODULE_ENABLED */ 268 269 #ifdef HAL_PWR_MODULE_ENABLED 270 #include "stm32wbxx_hal_pwr.h" 271 #endif /* HAL_PWR_MODULE_ENABLED */ 272 273 #ifdef HAL_QSPI_MODULE_ENABLED 274 #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U 275 #include "stm32wbxx_hal_qspi.h" 276 #endif /* HAL_QSPI_MODULE_ENABLED */ 277 278 #ifdef HAL_RCC_MODULE_ENABLED 279 #include "stm32wbxx_hal_rcc.h" 280 #endif /* HAL_RCC_MODULE_ENABLED */ 281 282 #ifdef HAL_RNG_MODULE_ENABLED 283 #include "stm32wbxx_hal_rng.h" 284 #endif /* HAL_RNG_MODULE_ENABLED */ 285 286 #ifdef HAL_RTC_MODULE_ENABLED 287 #include "stm32wbxx_hal_rtc.h" 288 #endif /* HAL_RTC_MODULE_ENABLED */ 289 290 #ifdef HAL_SAI_MODULE_ENABLED 291 #include "stm32wbxx_hal_sai.h" 292 #endif /* HAL_SAI_MODULE_ENABLED */ 293 294 #ifdef HAL_SMARTCARD_MODULE_ENABLED 295 #include "stm32wbxx_hal_smartcard.h" 296 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 297 298 #ifdef HAL_SMBUS_MODULE_ENABLED 299 #include "stm32wbxx_hal_smbus.h" 300 #endif /* HAL_SMBUS_MODULE_ENABLED */ 301 302 #ifdef HAL_SPI_MODULE_ENABLED 303 #include "stm32wbxx_hal_spi.h" 304 #endif /* HAL_SPI_MODULE_ENABLED */ 305 306 #ifdef HAL_TIM_MODULE_ENABLED 307 #include "stm32wbxx_hal_tim.h" 308 #endif /* HAL_TIM_MODULE_ENABLED */ 309 310 #ifdef HAL_TSC_MODULE_ENABLED 311 #include "stm32wbxx_hal_tsc.h" 312 #endif /* HAL_TSC_MODULE_ENABLED */ 313 314 #ifdef HAL_UART_MODULE_ENABLED 315 #include "stm32wbxx_hal_uart.h" 316 #endif /* HAL_UART_MODULE_ENABLED */ 317 318 #ifdef HAL_USART_MODULE_ENABLED 319 #include "stm32wbxx_hal_usart.h" 320 #endif /* HAL_USART_MODULE_ENABLED */ 321 322 #ifdef HAL_WWDG_MODULE_ENABLED 323 #include "stm32wbxx_hal_wwdg.h" 324 #endif /* HAL_WWDG_MODULE_ENABLED */ 325 326 /* Exported macro ------------------------------------------------------------*/ 327 #ifdef USE_FULL_ASSERT 328 /** 329 * @brief The assert_param macro is used for function's parameters check. 330 * @param expr If expr is false, it calls assert_failed function 331 * which reports the name of the source file and the source 332 * line number of the call that failed. 333 * If expr is true, it returns no value. 334 * @retval None 335 */ 336 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 337 /* Exported functions ------------------------------------------------------- */ 338 void assert_failed(uint8_t* file, uint32_t line); 339 #else 340 #define assert_param(expr) ((void)0U) 341 #endif /* USE_FULL_ASSERT */ 342 343 #ifdef __cplusplus 344 } 345 #endif 346 347 #endif /* __STM32WBxx_HAL_CONF_H */ 348 349 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 350