1 /** 2 * \file 3 * 4 * Copyright (c) 2015 Atmel Corporation. All rights reserved. 5 * 6 * \asf_license_start 7 * 8 * \page License 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright notice, 14 * this list of conditions and the following disclaimer. 15 * 16 * 2. Redistributions in binary form must reproduce the above copyright notice, 17 * this list of conditions and the following disclaimer in the documentation 18 * and/or other materials provided with the distribution. 19 * 20 * 3. The name of Atmel may not be used to endorse or promote products derived 21 * from this software without specific prior written permission. 22 * 23 * 4. This software may only be redistributed and used in connection with an 24 * Atmel microcontroller product. 25 * 26 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED 27 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 28 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE 29 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR 30 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 34 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 35 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 36 * POSSIBILITY OF SUCH DAMAGE. 37 * 38 * \asf_license_stop 39 * 40 */ 41 /* 42 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> 43 */ 44 45 #ifndef _SAMV71_UART1_INSTANCE_ 46 #define _SAMV71_UART1_INSTANCE_ 47 48 /* ========== Register definition for UART1 peripheral ========== */ 49 #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) 50 #define REG_UART1_CR (0x400E0A00U) /**< \brief (UART1) Control Register */ 51 #define REG_UART1_MR (0x400E0A04U) /**< \brief (UART1) Mode Register */ 52 #define REG_UART1_IER (0x400E0A08U) /**< \brief (UART1) Interrupt Enable Register */ 53 #define REG_UART1_IDR (0x400E0A0CU) /**< \brief (UART1) Interrupt Disable Register */ 54 #define REG_UART1_IMR (0x400E0A10U) /**< \brief (UART1) Interrupt Mask Register */ 55 #define REG_UART1_SR (0x400E0A14U) /**< \brief (UART1) Status Register */ 56 #define REG_UART1_RHR (0x400E0A18U) /**< \brief (UART1) Receive Holding Register */ 57 #define REG_UART1_THR (0x400E0A1CU) /**< \brief (UART1) Transmit Holding Register */ 58 #define REG_UART1_BRGR (0x400E0A20U) /**< \brief (UART1) Baud Rate Generator Register */ 59 #define REG_UART1_CMPR (0x400E0A24U) /**< \brief (UART1) Comparison Register */ 60 #define REG_UART1_WPMR (0x400E0AE4U) /**< \brief (UART1) Write Protection Mode Register */ 61 #else 62 #define REG_UART1_CR (*(__O uint32_t*)0x400E0A00U) /**< \brief (UART1) Control Register */ 63 #define REG_UART1_MR (*(__IO uint32_t*)0x400E0A04U) /**< \brief (UART1) Mode Register */ 64 #define REG_UART1_IER (*(__O uint32_t*)0x400E0A08U) /**< \brief (UART1) Interrupt Enable Register */ 65 #define REG_UART1_IDR (*(__O uint32_t*)0x400E0A0CU) /**< \brief (UART1) Interrupt Disable Register */ 66 #define REG_UART1_IMR (*(__I uint32_t*)0x400E0A10U) /**< \brief (UART1) Interrupt Mask Register */ 67 #define REG_UART1_SR (*(__I uint32_t*)0x400E0A14U) /**< \brief (UART1) Status Register */ 68 #define REG_UART1_RHR (*(__I uint32_t*)0x400E0A18U) /**< \brief (UART1) Receive Holding Register */ 69 #define REG_UART1_THR (*(__O uint32_t*)0x400E0A1CU) /**< \brief (UART1) Transmit Holding Register */ 70 #define REG_UART1_BRGR (*(__IO uint32_t*)0x400E0A20U) /**< \brief (UART1) Baud Rate Generator Register */ 71 #define REG_UART1_CMPR (*(__IO uint32_t*)0x400E0A24U) /**< \brief (UART1) Comparison Register */ 72 #define REG_UART1_WPMR (*(__IO uint32_t*)0x400E0AE4U) /**< \brief (UART1) Write Protection Mode Register */ 73 #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ 74 75 #endif /* _SAMV71_UART1_INSTANCE_ */ 76