1 /******************************************************************************
2  *
3  *  Copyright 1999-2012 Broadcom Corporation
4  *
5  *  Licensed under the Apache License, Version 2.0 (the "License");
6  *  you may not use this file except in compliance with the License.
7  *  You may obtain a copy of the License at:
8  *
9  *  http://www.apache.org/licenses/LICENSE-2.0
10  *
11  *  Unless required by applicable law or agreed to in writing, software
12  *  distributed under the License is distributed on an "AS IS" BASIS,
13  *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14  *  See the License for the specific language governing permissions and
15  *  limitations under the License.
16  *
17  ******************************************************************************/
18 #ifndef GATT_API_H
19 #define GATT_API_H
20 
21 #include <base/strings/stringprintf.h>
22 #include <bluetooth/log.h>
23 
24 #include <cstdint>
25 #include <list>
26 #include <string>
27 
28 #include "btm_ble_api.h"
29 #include "gattdefs.h"
30 #include "hardware/bt_gatt_types.h"
31 #include "include/hardware/bt_common_types.h"
32 #include "internal_include/bt_target.h"
33 #include "macros.h"
34 #include "stack/include/btm_ble_api_types.h"
35 #include "stack/include/hci_error_code.h"
36 #include "types/bluetooth/uuid.h"
37 #include "types/bt_transport.h"
38 #include "types/raw_address.h"
39 
40 /*****************************************************************************
41  *  Constants
42  ****************************************************************************/
43 /* Success code and error codes */
44 typedef enum GattStatus : uint8_t {
45   GATT_SUCCESS = 0x00,
46   GATT_INVALID_HANDLE = 0x01,
47   GATT_READ_NOT_PERMIT = 0x02,
48   GATT_WRITE_NOT_PERMIT = 0x03,
49   GATT_INVALID_PDU = 0x04,
50   GATT_INSUF_AUTHENTICATION = 0x05,
51   GATT_REQ_NOT_SUPPORTED = 0x06,
52   GATT_INVALID_OFFSET = 0x07,
53   GATT_INSUF_AUTHORIZATION = 0x08,
54   GATT_PREPARE_Q_FULL = 0x09,
55   GATT_NOT_FOUND = 0x0a,
56   GATT_NOT_LONG = 0x0b,
57   GATT_INSUF_KEY_SIZE = 0x0c,
58   GATT_INVALID_ATTR_LEN = 0x0d,
59   GATT_ERR_UNLIKELY = 0x0e,
60   GATT_INSUF_ENCRYPTION = 0x0f,
61   GATT_UNSUPPORT_GRP_TYPE = 0x10,
62   GATT_INSUF_RESOURCE = 0x11,
63   GATT_DATABASE_OUT_OF_SYNC = 0x12,
64   GATT_VALUE_NOT_ALLOWED = 0x13,
65   GATT_ILLEGAL_PARAMETER = 0x87,
66   GATT_NO_RESOURCES = 0x80,
67   GATT_INTERNAL_ERROR = 0x81,
68   GATT_WRONG_STATE = 0x82,
69   GATT_DB_FULL = 0x83,
70   GATT_BUSY = 0x84,
71   GATT_ERROR = 0x85,
72   GATT_CMD_STARTED = 0x86,
73   GATT_PENDING = 0x88,
74   GATT_AUTH_FAIL = 0x89,
75   GATT_INVALID_CFG = 0x8b,
76   GATT_SERVICE_STARTED = 0x8c,
77   GATT_ENCRYPED_MITM = GATT_SUCCESS,
78   GATT_ENCRYPED_NO_MITM = 0x8d,
79   GATT_NOT_ENCRYPTED = 0x8e,
80   GATT_CONGESTED = 0x8f,
81   GATT_DUP_REG = 0x90,      /* 0x90 */
82   GATT_ALREADY_OPEN = 0x91, /* 0x91 */
83   GATT_CANCEL = 0x92,       /* 0x92 */
84   GATT_CONNECTION_TIMEOUT = 0x93,
85   /* = 0xE0 ~ 0xFC reserved for future use */
86 
87   /* Client Characteristic Configuration Descriptor Improperly Configured */
88   GATT_CCC_CFG_ERR = 0xFD,
89   /* Procedure Already in progress */
90   GATT_PRC_IN_PROGRESS = 0xFE,
91   /* Attribute value out of range */
92   GATT_OUT_OF_RANGE = 0xFF,
93 } tGATT_STATUS;
94 
gatt_status_text(const tGATT_STATUS & status)95 inline std::string gatt_status_text(const tGATT_STATUS& status) {
96   switch (status) {
97     CASE_RETURN_TEXT(GATT_SUCCESS);  // Also GATT_ENCRYPED_MITM
98     CASE_RETURN_TEXT(GATT_INVALID_HANDLE);
99     CASE_RETURN_TEXT(GATT_READ_NOT_PERMIT);
100     CASE_RETURN_TEXT(GATT_WRITE_NOT_PERMIT);
101     CASE_RETURN_TEXT(GATT_INVALID_PDU);
102     CASE_RETURN_TEXT(GATT_INSUF_AUTHENTICATION);
103     CASE_RETURN_TEXT(GATT_REQ_NOT_SUPPORTED);
104     CASE_RETURN_TEXT(GATT_INVALID_OFFSET);
105     CASE_RETURN_TEXT(GATT_INSUF_AUTHORIZATION);
106     CASE_RETURN_TEXT(GATT_PREPARE_Q_FULL);
107     CASE_RETURN_TEXT(GATT_NOT_FOUND);
108     CASE_RETURN_TEXT(GATT_NOT_LONG);
109     CASE_RETURN_TEXT(GATT_INSUF_KEY_SIZE);
110     CASE_RETURN_TEXT(GATT_INVALID_ATTR_LEN);
111     CASE_RETURN_TEXT(GATT_ERR_UNLIKELY);
112     CASE_RETURN_TEXT(GATT_INSUF_ENCRYPTION);
113     CASE_RETURN_TEXT(GATT_UNSUPPORT_GRP_TYPE);
114     CASE_RETURN_TEXT(GATT_INSUF_RESOURCE);
115     CASE_RETURN_TEXT(GATT_DATABASE_OUT_OF_SYNC);
116     CASE_RETURN_TEXT(GATT_VALUE_NOT_ALLOWED);
117     CASE_RETURN_TEXT(GATT_ILLEGAL_PARAMETER);
118     CASE_RETURN_TEXT(GATT_NO_RESOURCES);
119     CASE_RETURN_TEXT(GATT_INTERNAL_ERROR);
120     CASE_RETURN_TEXT(GATT_WRONG_STATE);
121     CASE_RETURN_TEXT(GATT_DB_FULL);
122     CASE_RETURN_TEXT(GATT_BUSY);
123     CASE_RETURN_TEXT(GATT_ERROR);
124     CASE_RETURN_TEXT(GATT_CMD_STARTED);
125     CASE_RETURN_TEXT(GATT_PENDING);
126     CASE_RETURN_TEXT(GATT_AUTH_FAIL);
127     CASE_RETURN_TEXT(GATT_INVALID_CFG);
128     CASE_RETURN_TEXT(GATT_SERVICE_STARTED);
129     CASE_RETURN_TEXT(GATT_ENCRYPED_NO_MITM);
130     CASE_RETURN_TEXT(GATT_NOT_ENCRYPTED);
131     CASE_RETURN_TEXT(GATT_CONGESTED);
132     CASE_RETURN_TEXT(GATT_DUP_REG);
133     CASE_RETURN_TEXT(GATT_ALREADY_OPEN);
134     CASE_RETURN_TEXT(GATT_CANCEL);
135     CASE_RETURN_TEXT(GATT_CONNECTION_TIMEOUT);
136     CASE_RETURN_TEXT(GATT_CCC_CFG_ERR);
137     CASE_RETURN_TEXT(GATT_PRC_IN_PROGRESS);
138     CASE_RETURN_TEXT(GATT_OUT_OF_RANGE);
139     default:
140       return base::StringPrintf("UNKNOWN[%hhu]", status);
141   }
142 }
143 
144 typedef enum : uint8_t {
145   GATT_RSP_ERROR = 0x01,
146   GATT_REQ_MTU = 0x02,
147   GATT_RSP_MTU = 0x03,
148   GATT_REQ_FIND_INFO = 0x04,
149   GATT_RSP_FIND_INFO = 0x05,
150   GATT_REQ_FIND_TYPE_VALUE = 0x06,
151   GATT_RSP_FIND_TYPE_VALUE = 0x07,
152   GATT_REQ_READ_BY_TYPE = 0x08,
153   GATT_RSP_READ_BY_TYPE = 0x09,
154   GATT_REQ_READ = 0x0A,
155   GATT_RSP_READ = 0x0B,
156   GATT_REQ_READ_BLOB = 0x0C,
157   GATT_RSP_READ_BLOB = 0x0D,
158   GATT_REQ_READ_MULTI = 0x0E,
159   GATT_RSP_READ_MULTI = 0x0F,
160   GATT_REQ_READ_BY_GRP_TYPE = 0x10,
161   GATT_RSP_READ_BY_GRP_TYPE = 0x11,
162   /*                 0001-0010 (write)*/
163   GATT_REQ_WRITE = 0x12,
164   GATT_RSP_WRITE = 0x13,
165   /* changed in V4.0 01001-0010(write cmd)*/
166   GATT_CMD_WRITE = 0x52,
167   GATT_REQ_PREPARE_WRITE = 0x16,
168   GATT_RSP_PREPARE_WRITE = 0x17,
169   GATT_REQ_EXEC_WRITE = 0x18,
170   GATT_RSP_EXEC_WRITE = 0x19,
171   GATT_HANDLE_VALUE_NOTIF = 0x1B,
172   GATT_HANDLE_VALUE_IND = 0x1D,
173   GATT_HANDLE_VALUE_CONF = 0x1E,
174 
175   GATT_REQ_READ_MULTI_VAR = 0x20,
176   GATT_RSP_READ_MULTI_VAR = 0x21,
177   GATT_HANDLE_MULTI_VALUE_NOTIF = 0x23,
178 
179   /* changed in V4.0 1101-0010 (signed write)  see write cmd above*/
180   GATT_SIGN_CMD_WRITE = 0xD2,
181   /* 0x1E = 30 + 1 = 31*/
182   GATT_OP_CODE_MAX = (GATT_HANDLE_MULTI_VALUE_NOTIF + 1),
183 } tGATT_OP_CODE;
184 
185 typedef enum : uint8_t {
186   MTU_EXCHANGE_DEVICE_DISCONNECTED = 0x00,
187   MTU_EXCHANGE_NOT_ALLOWED,
188   MTU_EXCHANGE_NOT_DONE_YET,
189   MTU_EXCHANGE_IN_PROGRESS,
190   MTU_EXCHANGE_ALREADY_DONE,
191 } tGATTC_TryMtuRequestResult;
192 
gatt_op_code_text(const tGATT_OP_CODE & op_code)193 inline std::string gatt_op_code_text(const tGATT_OP_CODE& op_code) {
194   switch (op_code) {
195     case GATT_RSP_ERROR:
196       return std::string("GATT_RSP_ERROR");
197     case GATT_REQ_MTU:
198       return std::string("GATT_REQ_MTU");
199     case GATT_RSP_MTU:
200       return std::string("GATT_RSP_MTU");
201     case GATT_REQ_FIND_INFO:
202       return std::string("GATT_REQ_FIND_INFO");
203     case GATT_RSP_FIND_INFO:
204       return std::string("GATT_RSP_FIND_INFO");
205     case GATT_REQ_FIND_TYPE_VALUE:
206       return std::string("GATT_REQ_FIND_TYPE_VALUE");
207     case GATT_RSP_FIND_TYPE_VALUE:
208       return std::string("GATT_RSP_FIND_TYPE_VALUE");
209     case GATT_REQ_READ_BY_TYPE:
210       return std::string("GATT_REQ_READ_BY_TYPE");
211     case GATT_RSP_READ_BY_TYPE:
212       return std::string("GATT_RSP_READ_BY_TYPE");
213     case GATT_REQ_READ:
214       return std::string("GATT_REQ_READ");
215     case GATT_RSP_READ:
216       return std::string("GATT_RSP_READ");
217     case GATT_REQ_READ_BLOB:
218       return std::string("GATT_REQ_READ_BLOB");
219     case GATT_RSP_READ_BLOB:
220       return std::string("GATT_RSP_READ_BLOB");
221     case GATT_REQ_READ_MULTI:
222       return std::string("GATT_REQ_READ_MULTI");
223     case GATT_RSP_READ_MULTI:
224       return std::string("GATT_RSP_READ_MULTI");
225     case GATT_REQ_READ_BY_GRP_TYPE:
226       return std::string("GATT_REQ_READ_BY_GRP_TYPE");
227     case GATT_RSP_READ_BY_GRP_TYPE:
228       return std::string("GATT_RSP_READ_BY_GRP_TYPE");
229     case GATT_REQ_WRITE:
230       return std::string("GATT_REQ_WRITE");
231     case GATT_RSP_WRITE:
232       return std::string("GATT_RSP_WRITE");
233     case GATT_CMD_WRITE:
234       return std::string("GATT_CMD_WRITE");
235     case GATT_REQ_PREPARE_WRITE:
236       return std::string("GATT_REQ_PREPARE_WRITE");
237     case GATT_RSP_PREPARE_WRITE:
238       return std::string("GATT_RSP_PREPARE_WRITE");
239     case GATT_REQ_EXEC_WRITE:
240       return std::string("GATT_REQ_EXEC_WRITE");
241     case GATT_RSP_EXEC_WRITE:
242       return std::string("GATT_RSP_EXEC_WRITE");
243     case GATT_HANDLE_VALUE_NOTIF:
244       return std::string("GATT_HANDLE_VALUE_NOTIF");
245     case GATT_HANDLE_VALUE_IND:
246       return std::string("GATT_HANDLE_VALUE_IND");
247     case GATT_HANDLE_VALUE_CONF:
248       return std::string("GATT_HANDLE_VALUE_CONF");
249     case GATT_REQ_READ_MULTI_VAR:
250       return std::string("GATT_REQ_READ_MULTI_VAR");
251     case GATT_RSP_READ_MULTI_VAR:
252       return std::string("GATT_RSP_READ_MULTI_VAR");
253     case GATT_HANDLE_MULTI_VALUE_NOTIF:
254       return std::string("GATT_HANDLE_MULTI_VALUE_NOTIF");
255     case GATT_SIGN_CMD_WRITE:
256       return std::string("GATT_SIGN_CMD_WRITE");
257     case GATT_OP_CODE_MAX:
258       return std::string("GATT_OP_CODE_MAX");
259   };
260 }
261 
262 #define GATT_HANDLE_IS_VALID(x) ((x) != 0)
263 
264 typedef enum : uint16_t {
265   GATT_CONN_OK = 0,
266   /* general L2cap failure  */
267   GATT_CONN_L2C_FAILURE = 1,
268   /* 0x08 connection timeout  */
269   GATT_CONN_TIMEOUT = HCI_ERR_CONNECTION_TOUT,
270   /* 0x13 connection terminate by peer user  */
271   GATT_CONN_TERMINATE_PEER_USER = HCI_ERR_PEER_USER,
272   /* 0x16 connection terminated by local host  */
273   GATT_CONN_TERMINATE_LOCAL_HOST = HCI_ERR_CONN_CAUSE_LOCAL_HOST,
274   /* 0x22 connection fail for LMP response tout */
275   GATT_CONN_LMP_TIMEOUT = HCI_ERR_LMP_RESPONSE_TIMEOUT,
276 
277   GATT_CONN_FAILED_ESTABLISHMENT = HCI_ERR_CONN_FAILED_ESTABLISHMENT,
278 
279   GATT_CONN_TERMINATED_POWER_OFF = HCI_ERR_REMOTE_POWER_OFF,
280 
281   BTA_GATT_CONN_NONE = 0x0101, /* 0x0101 no connection to cancel  */
282 } tGATT_DISCONN_REASON;
283 
gatt_disconnection_reason_text(const tGATT_DISCONN_REASON & reason)284 inline std::string gatt_disconnection_reason_text(const tGATT_DISCONN_REASON& reason) {
285   switch (reason) {
286     CASE_RETURN_TEXT(GATT_CONN_OK);
287     CASE_RETURN_TEXT(GATT_CONN_L2C_FAILURE);
288     CASE_RETURN_TEXT(GATT_CONN_TIMEOUT);
289     CASE_RETURN_TEXT(GATT_CONN_TERMINATE_PEER_USER);
290     CASE_RETURN_TEXT(GATT_CONN_TERMINATE_LOCAL_HOST);
291     CASE_RETURN_TEXT(GATT_CONN_LMP_TIMEOUT);
292     CASE_RETURN_TEXT(GATT_CONN_FAILED_ESTABLISHMENT);
293     CASE_RETURN_TEXT(BTA_GATT_CONN_NONE);
294     CASE_RETURN_TEXT(GATT_CONN_TERMINATED_POWER_OFF);
295     default:
296       return base::StringPrintf("UNKNOWN[%hu]", reason);
297   }
298 }
299 
300 /* LE PHY bits */
301 constexpr uint8_t LE_PHY_1M_BIT = 0;
302 constexpr uint8_t LE_PHY_2M_BIT = 1;
303 constexpr uint8_t LE_PHY_CODED_BIT = 2;
304 
305 /* LE PHY bit mask values */
306 constexpr uint8_t LE_PHY_1M = (1 << LE_PHY_1M_BIT);
307 constexpr uint8_t LE_PHY_2M = (1 << LE_PHY_2M_BIT);
308 constexpr uint8_t LE_PHY_CODED = (1 << LE_PHY_CODED_BIT);
309 
310 /* MAX GATT MTU size
311  */
312 #ifndef GATT_MAX_MTU_SIZE
313 #define GATT_MAX_MTU_SIZE 517
314 #endif
315 
316 /* default GATT MTU size over LE link
317  */
318 #define GATT_DEF_BLE_MTU_SIZE 23
319 
320 /* invalid connection ID
321  */
322 #define GATT_INVALID_CONN_ID ((tCONN_ID)0xFFFF)
323 
324 /* GATT notification caching timer, default to be three seconds
325  */
326 #ifndef GATTC_NOTIF_TIMEOUT
327 #define GATTC_NOTIF_TIMEOUT 3
328 #endif
329 
330 /*****************************************************************************
331  * GATT Structure Definition
332  ****************************************************************************/
333 
334 /* Attribute permissions
335  */
336 #define GATT_PERM_READ (1 << 0)                              /* bit 0 */
337 #define GATT_PERM_READ_ENCRYPTED (1 << 1)                    /* bit 1 */
338 #define GATT_PERM_READ_ENC_MITM (1 << 2)                     /* bit 2 */
339 #define GATT_PERM_WRITE (1 << 4)                             /* bit 4 */
340 #define GATT_PERM_WRITE_ENCRYPTED (1 << 5)                   /* bit 5 */
341 #define GATT_PERM_WRITE_ENC_MITM (1 << 6)                    /* bit 6 */
342 #define GATT_PERM_WRITE_SIGNED (1 << 7)                      /* bit 7 */
343 #define GATT_PERM_WRITE_SIGNED_MITM (1 << 8)                 /* bit 8 */
344 #define GATT_PERM_READ_IF_ENCRYPTED_OR_DISCOVERABLE (1 << 9) /* bit 9 */
345 typedef uint16_t tGATT_PERM;
346 
347 /* the MS nibble of tGATT_PERM; key size 7=0; size 16=9 */
348 #define GATT_ENCRYPT_KEY_SIZE_MASK (0xF000)
349 
350 #define GATT_READ_ALLOWED                                                \
351   (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM | \
352    GATT_PERM_READ_IF_ENCRYPTED_OR_DISCOVERABLE)
353 #define GATT_READ_AUTH_REQUIRED (GATT_PERM_READ_ENCRYPTED)
354 #define GATT_READ_MITM_REQUIRED (GATT_PERM_READ_ENC_MITM)
355 #define GATT_READ_ENCRYPTED_REQUIRED (GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
356 
357 #define GATT_WRITE_ALLOWED                                                  \
358   (GATT_PERM_WRITE | GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM | \
359    GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
360 
361 #define GATT_WRITE_AUTH_REQUIRED (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_SIGNED)
362 
363 #define GATT_WRITE_MITM_REQUIRED (GATT_PERM_WRITE_ENC_MITM | GATT_PERM_WRITE_SIGNED_MITM)
364 
365 #define GATT_WRITE_ENCRYPTED_PERM (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM)
366 
367 #define GATT_WRITE_SIGNED_PERM (GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
368 
369 /* Characteristic properties
370  */
371 #define GATT_CHAR_PROP_BIT_BROADCAST (1 << 0)
372 #define GATT_CHAR_PROP_BIT_READ (1 << 1)
373 #define GATT_CHAR_PROP_BIT_WRITE_NR (1 << 2)
374 #define GATT_CHAR_PROP_BIT_WRITE (1 << 3)
375 #define GATT_CHAR_PROP_BIT_NOTIFY (1 << 4)
376 #define GATT_CHAR_PROP_BIT_INDICATE (1 << 5)
377 #define GATT_CHAR_PROP_BIT_AUTH (1 << 6)
378 #define GATT_CHAR_PROP_BIT_EXT_PROP (1 << 7)
379 typedef uint8_t tGATT_CHAR_PROP;
380 
381 /* Format of the value of a characteristic. enumeration type
382  */
383 enum {
384   GATT_FORMAT_RES,     /* rfu */
385   GATT_FORMAT_BOOL,    /* 0x01 boolean */
386   GATT_FORMAT_2BITS,   /* 0x02 2 bit */
387   GATT_FORMAT_NIBBLE,  /* 0x03 nibble */
388   GATT_FORMAT_UINT8,   /* 0x04 uint8 */
389   GATT_FORMAT_UINT12,  /* 0x05 uint12 */
390   GATT_FORMAT_UINT16,  /* 0x06 uint16 */
391   GATT_FORMAT_UINT24,  /* 0x07 uint24 */
392   GATT_FORMAT_UINT32,  /* 0x08 uint32 */
393   GATT_FORMAT_UINT48,  /* 0x09 uint48 */
394   GATT_FORMAT_UINT64,  /* 0x0a uint64 */
395   GATT_FORMAT_UINT128, /* 0x0B uint128 */
396   GATT_FORMAT_SINT8,   /* 0x0C signed 8 bit integer */
397   GATT_FORMAT_SINT12,  /* 0x0D signed 12 bit integer */
398   GATT_FORMAT_SINT16,  /* 0x0E signed 16 bit integer */
399   GATT_FORMAT_SINT24,  /* 0x0F signed 24 bit integer */
400   GATT_FORMAT_SINT32,  /* 0x10 signed 32 bit integer */
401   GATT_FORMAT_SINT48,  /* 0x11 signed 48 bit integer */
402   GATT_FORMAT_SINT64,  /* 0x12 signed 64 bit integer */
403   GATT_FORMAT_SINT128, /* 0x13 signed 128 bit integer */
404   GATT_FORMAT_FLOAT32, /* 0x14 float 32 */
405   GATT_FORMAT_FLOAT64, /* 0x15 float 64*/
406   GATT_FORMAT_SFLOAT,  /* 0x16 IEEE-11073 16 bit SFLOAT */
407   GATT_FORMAT_FLOAT,   /* 0x17 IEEE-11073 32 bit SFLOAT */
408   GATT_FORMAT_DUINT16, /* 0x18 IEEE-20601 format */
409   GATT_FORMAT_UTF8S,   /* 0x19 UTF-8 string */
410   GATT_FORMAT_UTF16S,  /* 0x1a UTF-16 string */
411   GATT_FORMAT_STRUCT,  /* 0x1b Opaque structure*/
412   GATT_FORMAT_MAX      /* 0x1c or above reserved */
413 };
414 typedef uint8_t tGATT_FORMAT;
415 
416 /* Characteristic Presentation Format Descriptor value
417  */
418 typedef struct {
419   uint16_t unit;  /* as UUIUD defined by SIG */
420   uint16_t descr; /* as UUID as defined by SIG */
421   tGATT_FORMAT format;
422   int8_t exp;
423   uint8_t name_spc; /* The name space of the description */
424 } tGATT_CHAR_PRES;
425 
426 /* Characteristic Report reference Descriptor format
427  */
428 typedef struct {
429   uint8_t rpt_id;   /* report ID */
430   uint8_t rpt_type; /* report type */
431 } tGATT_CHAR_RPT_REF;
432 
433 #define GATT_VALID_RANGE_MAX_SIZE 16
434 typedef struct {
435   uint8_t format;
436   uint16_t len;
437   uint8_t lower_range[GATT_VALID_RANGE_MAX_SIZE]; /* in little endian format */
438   uint8_t upper_range[GATT_VALID_RANGE_MAX_SIZE];
439 } tGATT_VALID_RANGE;
440 
441 /* Characteristic Aggregate Format attribute value
442  */
443 #define GATT_AGGR_HANDLE_NUM_MAX 10
444 typedef struct {
445   uint8_t num_handle;
446   uint16_t handle_list[GATT_AGGR_HANDLE_NUM_MAX];
447 } tGATT_CHAR_AGGRE;
448 
449 /* Characteristic descriptor: Extended Properties value
450  */
451 /* permits reliable writes of the Characteristic Value */
452 #define GATT_CHAR_BIT_REL_WRITE 0x0001
453 /* permits writes to the characteristic descriptor */
454 #define GATT_CHAR_BIT_WRITE_AUX 0x0002
455 
456 /* characteristic descriptor: client configuration value
457  */
458 #define GATT_CLT_CONFIG_NONE 0x0000
459 #define GATT_CLT_CONFIG_NOTIFICATION 0x0001
460 #define GATT_CLT_CONFIG_INDICATION 0x0002
461 
462 /* characteristic descriptor: server configuration value
463  */
464 #define GATT_SVR_CONFIG_NONE 0x0000
465 #define GATT_SVR_CONFIG_BROADCAST 0x0001
466 typedef uint16_t tGATT_SVR_CHAR_CONFIG;
467 
468 /* Characteristic descriptor: Extended Properties value
469  */
470 /* permits reliable writes of the Characteristic Value */
471 #define GATT_CHAR_BIT_REL_WRITE 0x0001
472 /* permits writes to the characteristic descriptor */
473 #define GATT_CHAR_BIT_WRITE_AUX 0x0002
474 
475 /* authentication requirement
476  */
477 #define GATT_AUTH_REQ_NONE 0
478 #define GATT_AUTH_REQ_NO_MITM 1 /* unauthenticated encryption */
479 #define GATT_AUTH_REQ_MITM 2    /* authenticated encryption */
480 #define GATT_AUTH_REQ_SIGNED_NO_MITM 3
481 #define GATT_AUTH_REQ_SIGNED_MITM 4
482 typedef uint8_t tGATT_AUTH_REQ;
483 
484 /* Attribute Value structure
485  */
486 typedef struct {
487   tCONN_ID conn_id;
488   uint16_t handle;                  /* attribute handle */
489   uint16_t offset;                  /* attribute value offset, if no offset is needed for the
490                                        command, ignore it */
491   uint16_t len;                     /* length of attribute value */
492   tGATT_AUTH_REQ auth_req;          /*  authentication request */
493   uint8_t value[GATT_MAX_ATTR_LEN]; /* the actual attribute value */
494 } tGATT_VALUE;
495 
496 /* Union of the event data which is used in the server respond API to carry the
497  * server response information
498  */
499 typedef union {
500   /* data type            member          event   */
501   tGATT_VALUE attr_value; /* READ, HANDLE_VALUE_IND, PREPARE_WRITE */
502                           /* READ_BLOB, READ_BY_TYPE */
503   uint16_t handle;        /* WRITE, WRITE_BLOB */
504 } tGATTS_RSP;
505 
506 #define GATT_PREP_WRITE_CANCEL 0x00
507 #define GATT_PREP_WRITE_EXEC 0x01
508 typedef uint8_t tGATT_EXEC_FLAG;
509 
510 /* read request always based on UUID */
511 typedef struct {
512   uint16_t handle;
513   uint16_t offset;
514   bool is_long;
515   bt_gatt_db_attribute_type_t gatt_type; /* are we writing characteristic or descriptor */
516 } tGATT_READ_REQ;
517 
518 /* write request data */
519 typedef struct {
520   uint16_t handle;                       /* attribute handle */
521   uint16_t offset;                       /* attribute value offset, if no offset is needed for the
522                                             command, ignore it */
523   uint16_t len;                          /* length of attribute value */
524   uint8_t value[GATT_MAX_ATTR_LEN];      /* the actual attribute value */
525   bool need_rsp;                         /* need write response */
526   bool is_prep;                          /* is prepare write */
527   bt_gatt_db_attribute_type_t gatt_type; /* are we writing characteristic or descriptor */
528 } tGATT_WRITE_REQ;
529 
530 /* callback data for server access request from client */
531 typedef union {
532   tGATT_READ_REQ read_req; /* read request, read by Type, read blob */
533 
534   tGATT_WRITE_REQ write_req;  /* write */
535                               /* prepare write */
536                               /* write blob */
537   uint16_t handle;            /* handle value confirmation */
538   uint16_t mtu;               /* MTU exchange request */
539   tGATT_EXEC_FLAG exec_write; /* execute write */
540 } tGATTS_DATA;
541 
542 typedef uint8_t tGATT_SERV_IF; /* GATT Service Interface */
543 
544 enum {
545   GATTS_REQ_TYPE_READ_CHARACTERISTIC = 1, /* Char read request */
546   GATTS_REQ_TYPE_READ_DESCRIPTOR,         /* Desc read request */
547   GATTS_REQ_TYPE_WRITE_CHARACTERISTIC,    /* Char write request */
548   GATTS_REQ_TYPE_WRITE_DESCRIPTOR,        /* Desc write request */
549   GATTS_REQ_TYPE_WRITE_EXEC,              /* Execute write */
550   GATTS_REQ_TYPE_MTU,                     /* MTU exchange information */
551   GATTS_REQ_TYPE_CONF                     /* handle value confirmation */
552 };
553 typedef uint8_t tGATTS_REQ_TYPE;
554 
555 /* Client Used Data Structure
556  */
557 /* definition of different discovery types */
558 typedef enum : uint8_t {
559   GATT_DISC_SRVC_ALL = 1, /* discover all services */
560   GATT_DISC_SRVC_BY_UUID, /* discover service of a special type */
561   GATT_DISC_INC_SRVC,     /* discover the included service within a service */
562   GATT_DISC_CHAR,         /* discover characteristics of a service with/without type
563                              requirement */
564   GATT_DISC_CHAR_DSCPT,   /* discover characteristic descriptors of a character */
565   GATT_DISC_MAX           /* maximum discover type */
566 } tGATT_DISC_TYPE;
567 
568 /* GATT read type enumeration
569  */
570 enum {
571   GATT_READ_BY_TYPE = 1,
572   GATT_READ_BY_HANDLE,
573   GATT_READ_MULTIPLE,
574   GATT_READ_MULTIPLE_VAR_LEN,
575   GATT_READ_CHAR_VALUE,
576   GATT_READ_PARTIAL,
577   GATT_READ_MAX
578 };
579 typedef uint8_t tGATT_READ_TYPE;
580 
581 /* Read By Type Request (GATT_READ_BY_TYPE) Data
582  */
583 typedef struct {
584   tGATT_AUTH_REQ auth_req;
585   uint16_t s_handle;
586   uint16_t e_handle;
587   bluetooth::Uuid uuid;
588 } tGATT_READ_BY_TYPE;
589 
590 /*   GATT_READ_MULTIPLE request data
591  */
592 #define GATT_MAX_READ_MULTI_HANDLES 10 /* Max attributes to read in one request */
593 typedef struct {
594   tGATT_AUTH_REQ auth_req;
595   uint16_t num_handles;                          /* number of handles to read */
596   uint16_t handles[GATT_MAX_READ_MULTI_HANDLES]; /* handles list to be read */
597   bool variable_len;
598 } tGATT_READ_MULTI;
599 
600 /*   Read By Handle Request (GATT_READ_BY_HANDLE) data */
601 typedef struct {
602   tGATT_AUTH_REQ auth_req;
603   uint16_t handle;
604 } tGATT_READ_BY_HANDLE;
605 
606 /*   READ_BT_HANDLE_Request data */
607 typedef struct {
608   tGATT_AUTH_REQ auth_req;
609   uint16_t handle;
610   uint16_t offset;
611 } tGATT_READ_PARTIAL;
612 
613 /* Read Request Data
614  */
615 typedef union {
616   tGATT_READ_BY_TYPE service;
617   tGATT_READ_BY_TYPE char_type; /* characteristic type */
618   tGATT_READ_MULTI read_multiple;
619   tGATT_READ_BY_HANDLE by_handle;
620   tGATT_READ_PARTIAL partial;
621 } tGATT_READ_PARAM;
622 
623 /* GATT write type enumeration */
624 enum { GATT_WRITE_NO_RSP = 1, GATT_WRITE, GATT_WRITE_PREPARE };
625 typedef uint8_t tGATT_WRITE_TYPE;
626 
627 /* Client Operation Complete Callback Data
628  */
629 typedef union {
630   tGATT_VALUE att_value;
631   uint16_t mtu;
632   uint16_t handle;
633   uint16_t cid;
634 } tGATT_CL_COMPLETE;
635 
636 /* GATT client operation type, used in client callback function
637  */
638 typedef enum : uint8_t {
639   GATTC_OPTYPE_NONE = 0,
640   GATTC_OPTYPE_DISCOVERY = 1,
641   GATTC_OPTYPE_READ = 2,
642   GATTC_OPTYPE_WRITE = 3,
643   GATTC_OPTYPE_EXE_WRITE = 4,
644   GATTC_OPTYPE_CONFIG = 5,
645   GATTC_OPTYPE_NOTIFICATION = 6,
646   GATTC_OPTYPE_INDICATION = 7,
647 } tGATTC_OPTYPE;
648 
649 /* characteristic declaration
650  */
651 typedef struct {
652   tGATT_CHAR_PROP char_prop; /* characteristic properties */
653   uint16_t val_handle;       /* characteristic value attribute handle */
654   bluetooth::Uuid char_uuid; /* characteristic UUID type */
655 } tGATT_CHAR_DCLR_VAL;
656 
657 /* primary service group data
658  */
659 typedef struct {
660   uint16_t e_handle;            /* ending handle of the group */
661   bluetooth::Uuid service_type; /* group type */
662 } tGATT_GROUP_VALUE;
663 
664 /* included service attribute value
665  */
666 typedef struct {
667   bluetooth::Uuid service_type; /* included service UUID */
668   uint16_t s_handle;            /* starting handle */
669   uint16_t e_handle;            /* ending handle */
670 } tGATT_INCL_SRVC;
671 
672 typedef union {
673   tGATT_INCL_SRVC incl_service;  /* include service value */
674   tGATT_GROUP_VALUE group_value; /* Service UUID type.
675                                     This field is used with GATT_DISC_SRVC_ALL
676                                     or GATT_DISC_SRVC_BY_UUID
677                                     type of discovery result callback. */
678 
679   uint16_t handle; /* When used with GATT_DISC_INC_SRVC type discovery result,
680                       it is the included service starting handle.*/
681 
682   tGATT_CHAR_DCLR_VAL dclr_value; /* Characteristic declaration value.
683                                      This field is used with GATT_DISC_CHAR type discovery.*/
684 } tGATT_DISC_VALUE;
685 
686 /* discover result record
687  */
688 typedef struct {
689   bluetooth::Uuid type;
690   uint16_t handle;
691   tGATT_DISC_VALUE value;
692 } tGATT_DISC_RES;
693 
694 #define GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP  \
695   1 /* start a idle timer for this duration \
696      when no application need to use the link */
697 
698 #define GATT_LINK_NO_IDLE_TIMEOUT 0xFFFF
699 
700 #define GATT_INVALID_ACL_HANDLE 0xFFFF
701 /* discover result callback function */
702 typedef void(tGATT_DISC_RES_CB)(tCONN_ID conn_id, tGATT_DISC_TYPE disc_type,
703                                 tGATT_DISC_RES* p_data);
704 
705 /* discover complete callback function */
706 typedef void(tGATT_DISC_CMPL_CB)(tCONN_ID conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status);
707 
708 /* Define a callback function for when read/write/disc/config operation is
709  * completed. */
710 typedef void(tGATT_CMPL_CBACK)(tCONN_ID conn_id, tGATTC_OPTYPE op, tGATT_STATUS status,
711                                tGATT_CL_COMPLETE* p_data);
712 
713 /* Define a callback function when an initialized connection is established. */
714 typedef void(tGATT_CONN_CBACK)(tGATT_IF gatt_if, const RawAddress& bda, tCONN_ID conn_id,
715                                bool connected, tGATT_DISCONN_REASON reason,
716                                tBT_TRANSPORT transport);
717 
718 /* attribute request callback for ATT server */
719 typedef void(tGATT_REQ_CBACK)(tCONN_ID conn_id, uint32_t trans_id, tGATTS_REQ_TYPE type,
720                               tGATTS_DATA* p_data);
721 
722 /* channel congestion/uncongestion callback */
723 typedef void(tGATT_CONGESTION_CBACK)(tCONN_ID conn_id, bool congested);
724 
725 /* Define a callback function when encryption is established. */
726 typedef void(tGATT_ENC_CMPL_CB)(tGATT_IF gatt_if, const RawAddress& bda);
727 
728 /* Define a callback function when phy is updated. */
729 typedef void(tGATT_PHY_UPDATE_CB)(tGATT_IF gatt_if, tCONN_ID conn_id, uint8_t tx_phy,
730                                   uint8_t rx_phy, tGATT_STATUS status);
731 
732 /* Define a callback function when connection parameters are updated */
733 typedef void(tGATT_CONN_UPDATE_CB)(tGATT_IF gatt_if, tCONN_ID conn_id, uint16_t interval,
734                                    uint16_t latency, uint16_t timeout, tGATT_STATUS status);
735 
736 /* Define a callback function when subrate change event is received */
737 typedef void(tGATT_SUBRATE_CHG_CB)(tGATT_IF gatt_if, tCONN_ID conn_id, uint16_t subrate_factor,
738                                    uint16_t latency, uint16_t cont_num, uint16_t timeout,
739                                    tGATT_STATUS status);
740 
741 /* Define the structure that applications use to register with
742  * GATT. This structure includes callback functions. All functions
743  * MUST be provided.
744  */
745 typedef struct {
746   tGATT_CONN_CBACK* p_conn_cb{nullptr};
747   tGATT_CMPL_CBACK* p_cmpl_cb{nullptr};
748   tGATT_DISC_RES_CB* p_disc_res_cb{nullptr};
749   tGATT_DISC_CMPL_CB* p_disc_cmpl_cb{nullptr};
750   tGATT_REQ_CBACK* p_req_cb{nullptr};
751   tGATT_ENC_CMPL_CB* p_enc_cmpl_cb{nullptr};
752   tGATT_CONGESTION_CBACK* p_congestion_cb{nullptr};
753   tGATT_PHY_UPDATE_CB* p_phy_update_cb{nullptr};
754   tGATT_CONN_UPDATE_CB* p_conn_update_cb{nullptr};
755   tGATT_SUBRATE_CHG_CB* p_subrate_chg_cb{nullptr};
756 } tGATT_CBACK;
757 
758 /*****************  Start Handle Management Definitions   *********************/
759 
760 typedef struct {
761   bluetooth::Uuid app_uuid128;
762   bluetooth::Uuid svc_uuid;
763   uint16_t s_handle;
764   uint16_t e_handle;
765   bool is_primary; /* primary service or secondary */
766 } tGATTS_HNDL_RANGE;
767 
768 #define GATTS_SRV_CHG_CMD_ADD_CLIENT 1
769 #define GATTS_SRV_CHG_CMD_UPDATE_CLIENT 2
770 #define GATTS_SRV_CHG_CMD_REMOVE_CLIENT 3
771 #define GATTS_SRV_CHG_CMD_READ_NUM_CLENTS 4
772 #define GATTS_SRV_CHG_CMD_READ_CLENT 5
773 typedef uint8_t tGATTS_SRV_CHG_CMD;
774 
775 typedef struct {
776   RawAddress bda;
777   bool srv_changed;
778 } tGATTS_SRV_CHG;
779 
780 typedef union {
781   tGATTS_SRV_CHG srv_chg;
782   uint8_t client_read_index; /* only used for sequential reading client srv chg
783                                 info */
784 } tGATTS_SRV_CHG_REQ;
785 
786 typedef union {
787   tGATTS_SRV_CHG srv_chg;
788   uint8_t num_clients;
789 } tGATTS_SRV_CHG_RSP;
790 
791 /* Attribute server handle ranges NV storage callback functions
792  */
793 typedef void(tGATTS_NV_SAVE_CBACK)(bool is_saved, tGATTS_HNDL_RANGE* p_hndl_range);
794 typedef bool(tGATTS_NV_SRV_CHG_CBACK)(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ* p_req,
795                                       tGATTS_SRV_CHG_RSP* p_rsp);
796 
797 typedef struct {
798   tGATTS_NV_SAVE_CBACK* p_nv_save_callback;
799   tGATTS_NV_SRV_CHG_CBACK* p_srv_chg_callback;
800 } tGATT_APPL_INFO;
801 
802 /********************  End Handle Management Definitions   ********************/
803 
804 /*******************************************************************************
805  *  External Function Declarations
806  ******************************************************************************/
807 
808 /******************************************************************************/
809 /* GATT Profile API Functions */
810 /******************************************************************************/
811 /* GATT Profile Server Functions */
812 /******************************************************************************/
813 
814 /*******************************************************************************
815  *
816  * Function         GATTS_NVRegister
817  *
818  * Description      Application manager calls this function to register for
819  *                  NV save callback function.  There can be one and only one
820  *                  NV save callback function.
821  *
822  * Parameter        p_cb_info : callback information
823  *
824  * Returns          true if registered OK, else false
825  *
826  ******************************************************************************/
827 [[nodiscard]] bool GATTS_NVRegister(tGATT_APPL_INFO* p_cb_info);
828 
829 /*******************************************************************************
830  *
831  * Function         BTA_GATTS_AddService
832  *
833  * Description      Add a service. When service is ready, a callback
834  *                  event BTA_GATTS_ADD_SRVC_EVT is called to report status
835  *                  and handles to the profile.
836  *
837  * Parameters       server_if: server interface.
838  *                  service: pointer array describing service.
839  *                  count: number of elements in service array.
840  *
841  * Returns          on success GATT_SERVICE_STARTED is returned, and
842  *                  attribute_handle field inside service elements are filled.
843  *                  on error error status is returned.
844  *
845  ******************************************************************************/
846 [[nodiscard]] tGATT_STATUS GATTS_AddService(tGATT_IF gatt_if, btgatt_db_element_t* service,
847                                             int count);
848 
849 /*******************************************************************************
850  *
851  * Function         GATTS_DeleteService
852  *
853  * Description      This function is called to delete a service.
854  *
855  * Parameter        gatt_if       : application interface
856  *                  p_svc_uuid    : service UUID
857  *                  svc_inst      : instance of the service inside the
858  *                                  application
859  *
860  * Returns          true if operation succeed, else false
861  *
862  ******************************************************************************/
863 [[nodiscard]] bool GATTS_DeleteService(tGATT_IF gatt_if, bluetooth::Uuid* p_svc_uuid,
864                                        uint16_t svc_inst);
865 
866 /*******************************************************************************
867  *
868  * Function         GATTS_StopService
869  *
870  * Description      This function is called to stop a service
871  *
872  * Parameter         service_handle : this is the start handle of a service
873  *
874  * Returns          None.
875  *
876  ******************************************************************************/
877 void GATTS_StopService(uint16_t service_handle);
878 
879 /*******************************************************************************
880  *
881  * Function         GATTs_HandleValueIndication
882  *
883  * Description      This function sends a handle value indication to a client.
884  *
885  * Parameter        conn_id: connection identifier.
886  *                  attr_handle: Attribute handle of this handle value
887  *                               indication.
888  *                  val_len: Length of the indicated attribute value.
889  *                  p_val: Pointer to the indicated attribute value data.
890  *
891  * Returns          GATT_SUCCESS if successfully sent or queued; otherwise error
892  *                               code.
893  *
894  ******************************************************************************/
895 [[nodiscard]] tGATT_STATUS GATTS_HandleValueIndication(tCONN_ID conn_id, uint16_t attr_handle,
896                                                        uint16_t val_len, uint8_t* p_val);
897 
898 /*******************************************************************************
899  *
900  * Function         GATTS_HandleValueNotification
901  *
902  * Description      This function sends a handle value notification to a client.
903  *
904  * Parameter       conn_id: connection identifier.
905  *                  attr_handle: Attribute handle of this handle value
906  *                               indication.
907  *                  val_len: Length of the indicated attribute value.
908  *                  p_val: Pointer to the indicated attribute value data.
909  *
910  * Returns          GATT_SUCCESS if successfully sent; otherwise error code.
911  *
912  ******************************************************************************/
913 [[nodiscard]] tGATT_STATUS GATTS_HandleValueNotification(tCONN_ID conn_id, uint16_t attr_handle,
914                                                          uint16_t val_len, uint8_t* p_val);
915 
916 /*******************************************************************************
917  *
918  * Function         GATTS_SendRsp
919  *
920  * Description      This function sends the server response to client.
921  *
922  * Parameter        conn_id: connection identifier.
923  *                  trans_id: transaction id
924  *                  status: response status
925  *                  p_msg: pointer to message parameters structure.
926  *
927  * Returns          GATT_SUCCESS if successfully sent; otherwise error code.
928  *
929  ******************************************************************************/
930 [[nodiscard]] tGATT_STATUS GATTS_SendRsp(tCONN_ID conn_id, uint32_t trans_id, tGATT_STATUS status,
931                                          tGATTS_RSP* p_msg);
932 
933 /******************************************************************************/
934 /* GATT Profile Client Functions */
935 /******************************************************************************/
936 
937 /*******************************************************************************
938  *
939  * Function         GATTC_ConfigureMTU
940  *
941  * Description      This function is called to configure the ATT MTU size for
942  *                  a connection on an LE transport.
943  *
944  * Parameters       conn_id: connection identifier.
945  *                  mtu    - attribute MTU size..
946  *
947  * Returns          GATT_SUCCESS if command started successfully.
948  *
949  ******************************************************************************/
950 [[nodiscard]] tGATT_STATUS GATTC_ConfigureMTU(tCONN_ID conn_id, uint16_t mtu);
951 
952 /*******************************************************************************
953  * Function         GATTC_UpdateUserAttMtuIfNeeded
954  *
955  * Description      This function to be called when user requested MTU after
956  *                  MTU Exchange has been already done. This will update data
957  *                  length in the controller.
958  *
959  * Parameters        remote_bda : peer device address. (input)
960  *                   transport  : physical transport of the GATT connection
961  *                                 (BR/EDR or LE) (input)
962  *                   user_mtu: user request mtu
963  *
964  ******************************************************************************/
965 void GATTC_UpdateUserAttMtuIfNeeded(const RawAddress& remote_bda, tBT_TRANSPORT transport,
966                                     uint16_t user_mtu);
967 
968 /******************************************************************************
969  *
970  * Function         GATTC_TryMtuRequest
971  *
972  * Description      This function shall be called before calling
973  *                  GATTC_ConfigureMTU in order to check if operation is
974  *                  available to do.
975  *
976  * Parameters        remote_bda : peer device address. (input)
977  *                   transport  : physical transport of the GATT connection
978  *                                 (BR/EDR or LE) (input)
979  *                   conn_id    : connection id  (input)
980  *                   current_mtu: current mtu on the link (output)
981  *
982  * Returns          tGATTC_TryMtuRequestResult:
983  *                  - MTU_EXCHANGE_NOT_DONE_YET: There was no MTU Exchange
984  *                      procedure on the link. User can call GATTC_ConfigureMTU
985  *                      now.
986  *                  - MTU_EXCHANGE_NOT_ALLOWED : Not allowed for BR/EDR or if
987  *                      link does not exist
988  *                  - MTU_EXCHANGE_ALREADY_DONE: MTU Exchange is done. MTU
989  *                      should be taken from current_mtu
990  *                  - MTU_EXCHANGE_IN_PROGRESS : Other use is doing MTU
991  *                      Exchange. Conn_id is stored for result.
992  *
993  ******************************************************************************/
994 [[nodiscard]] tGATTC_TryMtuRequestResult GATTC_TryMtuRequest(const RawAddress& remote_bda,
995                                                              tBT_TRANSPORT transport,
996                                                              tCONN_ID conn_id,
997                                                              uint16_t* current_mtu);
998 
999 [[nodiscard]] std::list<tCONN_ID> GATTC_GetAndRemoveListOfConnIdsWaitingForMtuRequest(
1000         const RawAddress& remote_bda);
1001 /*******************************************************************************
1002  *
1003  * Function         GATTC_Discover
1004  *
1005  * Description      This function is called to do a discovery procedure on ATT
1006  *                  server.
1007  *
1008  * Parameters       conn_id: connection identifier.
1009  *                  disc_type:discovery type.
1010  *                  start_handle and end_handle: range of handles for discovery
1011  *                  uuid: uuid to discovery. set to Uuid::kEmpty for requests
1012  *                        that don't need it
1013  *
1014  * Returns          GATT_SUCCESS if command received/sent successfully.
1015  *
1016  ******************************************************************************/
1017 [[nodiscard]] tGATT_STATUS GATTC_Discover(tCONN_ID conn_id, tGATT_DISC_TYPE disc_type,
1018                                           uint16_t start_handle, uint16_t end_handle,
1019                                           const bluetooth::Uuid& uuid);
1020 [[nodiscard]] tGATT_STATUS GATTC_Discover(tCONN_ID conn_id, tGATT_DISC_TYPE disc_type,
1021                                           uint16_t start_handle, uint16_t end_handle);
1022 
1023 /*******************************************************************************
1024  *
1025  * Function         GATTC_Read
1026  *
1027  * Description      This function is called to read the value of an attribute
1028  *                  from the server.
1029  *
1030  * Parameters       conn_id: connection identifier.
1031  *                  type    - attribute read type.
1032  *                  p_read  - read operation parameters.
1033  *
1034  * Returns          GATT_SUCCESS if command started successfully.
1035  *
1036  ******************************************************************************/
1037 [[nodiscard]] tGATT_STATUS GATTC_Read(tCONN_ID conn_id, tGATT_READ_TYPE type,
1038                                       tGATT_READ_PARAM* p_read);
1039 
1040 /*******************************************************************************
1041  *
1042  * Function         GATTC_Write
1043  *
1044  * Description      This function is called to read the value of an attribute
1045  *                  from the server.
1046  *
1047  * Parameters       conn_id: connection identifier.
1048  *                  type    - attribute write type.
1049  *                  p_write  - write operation parameters.
1050  *
1051  * Returns          GATT_SUCCESS if command started successfully.
1052  *
1053  ******************************************************************************/
1054 [[nodiscard]] tGATT_STATUS GATTC_Write(tCONN_ID conn_id, tGATT_WRITE_TYPE type,
1055                                        tGATT_VALUE* p_write);
1056 
1057 /*******************************************************************************
1058  *
1059  * Function         GATTC_ExecuteWrite
1060  *
1061  * Description      This function is called to send an Execute write request to
1062  *                  the server.
1063  *
1064  * Parameters       conn_id: connection identifier.
1065  *                  is_execute - to execute or cancel the prepare write
1066  *                               request(s)
1067  *
1068  * Returns          GATT_SUCCESS if command started successfully.
1069  *
1070  ******************************************************************************/
1071 [[nodiscard]] tGATT_STATUS GATTC_ExecuteWrite(tCONN_ID conn_id, bool is_execute);
1072 
1073 /*******************************************************************************
1074  *
1075  * Function         GATTC_SendHandleValueConfirm
1076  *
1077  * Description      This function is called to send a handle value confirmation
1078  *                  as response to a handle value notification from server.
1079  *
1080  * Parameters       conn_id: connection identifier.
1081  *                  handle: the handle of the attribute confirmation.
1082  *
1083  * Returns          GATT_SUCCESS if command started successfully.
1084  *
1085  ******************************************************************************/
1086 [[nodiscard]] tGATT_STATUS GATTC_SendHandleValueConfirm(tCONN_ID conn_id, uint16_t handle);
1087 
1088 /*******************************************************************************
1089  *
1090  * Function         GATT_SetIdleTimeout
1091  *
1092  * Description      This function (common to both client and server) sets the
1093  *                  idle timeout for a transport connection
1094  *
1095  * Parameter        bd_addr:   target device bd address.
1096  *                  idle_tout: timeout value in seconds.
1097  *                  transport: transport option.
1098  *                  is_active: whether we should use this as a signal that an
1099  *                             active client now exists (which changes link
1100  *                             timeout logic, see
1101  *                             t_l2c_linkcb.with_active_local_clients for
1102  *                             details).
1103  *
1104  * Returns          void
1105  *
1106  ******************************************************************************/
1107 void GATT_SetIdleTimeout(const RawAddress& bd_addr, uint16_t idle_tout, tBT_TRANSPORT transport,
1108                          bool is_active);
1109 
1110 /*******************************************************************************
1111  *
1112  * Function         GATT_Register
1113  *
1114  * Description      This function is called to register an  application
1115  *                  with GATT
1116  *
1117  * Parameter        p_app_uuid128: Application UUID
1118  *                  p_cb_info: callback functions.
1119  *                  eatt_support: set support for eatt
1120  *
1121  * Returns          0 for error, otherwise the index of the client registered
1122  *                  with GATT
1123  *
1124  ******************************************************************************/
1125 [[nodiscard]] tGATT_IF GATT_Register(const bluetooth::Uuid& p_app_uuid128, const std::string& name,
1126                                      tGATT_CBACK* p_cb_info, bool eatt_support);
1127 
1128 /*******************************************************************************
1129  *
1130  * Function         GATT_Deregister
1131  *
1132  * Description      This function deregistered the application from GATT.
1133  *
1134  * Parameters       gatt_if: application interface.
1135  *
1136  * Returns          None.
1137  *
1138  ******************************************************************************/
1139 void GATT_Deregister(tGATT_IF gatt_if);
1140 
1141 /*******************************************************************************
1142  *
1143  * Function         GATT_StartIf
1144  *
1145  * Description      This function is called after registration to start
1146  *                  receiving callbacks for registered interface.  Function may
1147  *                  call back with connection status and queued notifications
1148  *
1149  * Parameter        gatt_if: application interface.
1150  *
1151  * Returns          None
1152  *
1153  ******************************************************************************/
1154 void GATT_StartIf(tGATT_IF gatt_if);
1155 
1156 /*******************************************************************************
1157  *
1158  * Function         GATT_Connect
1159  *
1160  * Description      This function initiate a connection to a remote device on
1161  *                  GATT channel.
1162  *
1163  * Parameters       gatt_if: application interface
1164  *                  bd_addr: peer device address
1165  *                  addr_type: peer device address type
1166  *                  connection_type: connection type
1167  *                  transport : Physical transport for GATT connection
1168  *                              (BR/EDR or LE)
1169  *                  opportunistic: will not keep device connected if other apps
1170  *                      disconnect, will not update connected apps counter, when
1171  *                      disconnected won't cause physical disconnection.
1172  *
1173  * Returns          true if connection started; else false
1174  *
1175  ******************************************************************************/
1176 [[nodiscard]] bool GATT_Connect(tGATT_IF gatt_if, const RawAddress& bd_addr,
1177                                 tBLE_ADDR_TYPE addr_type, tBTM_BLE_CONN_TYPE connection_type,
1178                                 tBT_TRANSPORT transport, bool opportunistic,
1179                                 uint8_t initiating_phys, uint16_t preferred_transport);
1180 [[nodiscard]] bool GATT_Connect(tGATT_IF gatt_if, const RawAddress& bd_addr,
1181                                 tBTM_BLE_CONN_TYPE connection_type, tBT_TRANSPORT transport,
1182                                 bool opportunistic);
1183 
1184 /*******************************************************************************
1185  *
1186  * Function         GATT_CancelConnect
1187  *
1188  * Description      Terminate the connection initiation to a remote device on a
1189  *                  GATT channel.
1190  *
1191  * Parameters       gatt_if: client interface. If 0 used as unconditionally
1192  *                           disconnect, typically used for direct connection
1193  *                           cancellation.
1194  *                  bd_addr: peer device address.
1195  *                  is_direct: is a direct connection or a background auto
1196  *                             connection
1197  *
1198  * Returns          true if connection started; else false
1199  *
1200  ******************************************************************************/
1201 [[nodiscard]] bool GATT_CancelConnect(tGATT_IF gatt_if, const RawAddress& bd_addr, bool is_direct);
1202 
1203 /*******************************************************************************
1204  *
1205  * Function         GATT_Disconnect
1206  *
1207  * Description      Disconnect the GATT channel for this registered application.
1208  *
1209  * Parameters       conn_id: connection identifier.
1210  *
1211  * Returns          GATT_SUCCESS if disconnected.
1212  *
1213  ******************************************************************************/
1214 [[nodiscard]] tGATT_STATUS GATT_Disconnect(tCONN_ID conn_id);
1215 
1216 /*******************************************************************************
1217  *
1218  * Function         GATT_GetConnectionInfor
1219  *
1220  * Description      Use conn_id to find its associated BD address and
1221  *                  application interface
1222  *
1223  * Parameters        conn_id: connection id  (input)
1224  *                   p_gatt_if: application interface (output)
1225  *                   bd_addr: peer device address. (output)
1226  *                   transport : physical transport of the GATT connection
1227  *                                (BR/EDR or LE)
1228  *
1229  * Returns          true the logical link information is found for conn_id
1230  *
1231  ******************************************************************************/
1232 [[nodiscard]] bool GATT_GetConnectionInfor(tCONN_ID conn_id, tGATT_IF* p_gatt_if,
1233                                            RawAddress& bd_addr, tBT_TRANSPORT* p_transport);
1234 
1235 /*******************************************************************************
1236  *
1237  * Function         GATT_GetConnIdIfConnected
1238  *
1239  * Description      Find the conn_id if the logical link for a BD address
1240  *                  and application interface is connected
1241  *
1242  * Parameters        gatt_if: application interface (input)
1243  *                   bd_addr: peer device address. (input)
1244  *                   p_conn_id: connection id  (output)
1245  *                   transport :  physical transport of the GATT connection
1246  *                               (BR/EDR or LE)
1247  *
1248  * Returns          true the logical link is connected
1249  *
1250  ******************************************************************************/
1251 [[nodiscard]] bool GATT_GetConnIdIfConnected(tGATT_IF gatt_if, const RawAddress& bd_addr,
1252                                              tCONN_ID* p_conn_id, tBT_TRANSPORT transport);
1253 
1254 /*******************************************************************************
1255  *
1256  * Function         GATT_ConfigServiceChangeCCC
1257  *
1258  * Description      Configure service change indication on remote device
1259  *
1260  * Returns          None.
1261  *
1262  ******************************************************************************/
1263 void GATT_ConfigServiceChangeCCC(const RawAddress& remote_bda, bool enable,
1264                                  tBT_TRANSPORT transport);
1265 
1266 // Enables the GATT profile on the device.
1267 // It clears out the control blocks, and registers with L2CAP.
1268 void gatt_init(void);
1269 
1270 // Frees resources used by the GATT profile.
1271 void gatt_free(void);
1272 
1273 void gatt_consolidate(const RawAddress& identity_addr, const RawAddress& rpa);
1274 void gatt_notify_conn_update(const RawAddress& remote, uint16_t interval, uint16_t latency,
1275                              uint16_t timeout, tHCI_STATUS status);
1276 
1277 // Link encryption complete notification for all encryption process
1278 // initiated outside GATT.
1279 void gatt_notify_enc_cmpl(const RawAddress& bd_addr);
1280 
1281 /** Reset bg device list. If called after controller reset, set |after_reset| to
1282  * true, as there is no need to wipe controller acceptlist in this case. */
1283 void gatt_reset_bgdev_list(bool after_reset);
1284 
1285 // Initialize GATTS list of bonded device service change updates.
1286 void gatt_load_bonded(void);
1287 
1288 void gatt_tcb_dump(int fd);
1289 
1290 namespace std {
1291 template <>
1292 struct formatter<GattStatus> : enum_formatter<GattStatus> {};
1293 template <>
1294 struct formatter<tGATT_DISCONN_REASON> : enum_formatter<tGATT_DISCONN_REASON> {};
1295 template <>
1296 struct formatter<tGATTC_OPTYPE> : enum_formatter<tGATTC_OPTYPE> {};
1297 template <>
1298 struct formatter<tGATT_OP_CODE> : enum_formatter<tGATT_OP_CODE> {};
1299 template <>
1300 struct formatter<tGATT_DISC_TYPE> : enum_formatter<tGATT_DISC_TYPE> {};
1301 }  // namespace std
1302 
1303 #endif /* GATT_API_H */
1304