1Intel Stratix 10 SoCFPGA
2========================
3
4Stratix 10 SoCFPGA is a FPGA with integrated quad-core 64-bit Arm Cortex A53 processor.
5
6Upon boot, Boot ROM loads bl2 into OCRAM. Bl2 subsequently initializes
7the hardware, then loads bl31 and bl33 (UEFI) into DDR and boots to bl33.
8
9::
10
11    Boot ROM --> Trusted Firmware-A --> UEFI
12
13How to build
14------------
15
16Code Locations
17~~~~~~~~~~~~~~
18
19-  Trusted Firmware-A:
20   `link <https://github.com/ARM-software/arm-trusted-firmware>`__
21
22-  UEFI (to be updated with new upstreamed UEFI):
23   `link <https://github.com/altera-opensource/uefi-socfpga>`__
24
25Build Procedure
26~~~~~~~~~~~~~~~
27
28-  Fetch all the above 2 repositories into local host.
29   Make all the repositories in the same ${BUILD\_PATH}.
30
31-  Prepare the AARCH64 toolchain.
32
33-  Build UEFI using Stratix 10 platform as configuration
34   This will be updated to use an updated UEFI using the latest EDK2 source
35
36.. code:: bash
37
38       make CROSS_COMPILE=aarch64-linux-gnu- device=s10
39
40-  Build atf providing the previously generated UEFI as the BL33 image
41
42.. code:: bash
43
44       make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
45       BL33=PEI.ROM
46
47Install Procedure
48~~~~~~~~~~~~~~~~~
49
50- dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10
51  board.
52
53- Generate a SOF containing bl2
54
55.. code:: bash
56
57        aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex
58        quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>
59
60- Configure SOF to board
61
62.. code:: bash
63
64        nios2-configure-sof <output_sof_with_bl2>
65
66Boot trace
67----------
68
69::
70
71         INFO:    DDR: DRAM calibration success.
72         INFO:    ECC is disabled.
73         INFO:    Init HPS NOC's DDR Scheduler.
74         NOTICE:  BL2: v2.0(debug):v2.0-809-g7f8474a-dirty
75         NOTICE:  BL2: Built : 17:38:19, Feb 18 2019
76         INFO:    BL2: Doing platform setup
77         INFO:    BL2: Loading image id 3
78         INFO:    Loading image id=3 at address 0xffe1c000
79         INFO:    Image id=3 loaded: 0xffe1c000 - 0xffe24034
80         INFO:    BL2: Loading image id 5
81         INFO:    Loading image id=5 at address 0x50000
82         INFO:    Image id=5 loaded: 0x50000 - 0x550000
83         NOTICE:  BL2: Booting BL31
84         INFO:    Entry point address = 0xffe1c000
85         INFO:    SPSR = 0x3cd
86         NOTICE:  BL31: v2.0(debug):v2.0-810-g788c436-dirty
87         NOTICE:  BL31: Built : 15:17:16, Feb 20 2019
88         INFO:    ARM GICv2 driver initialized
89         INFO:    BL31: Initializing runtime services
90         WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
91         INFO:    BL31: Preparing for EL3 exit to normal world
92         INFO:    Entry point address = 0x50000
93         INFO:    SPSR = 0x3c9
94         UEFI firmware (version 1.0 built at 11:26:18 on Nov  7 2018)
95