1# This is the hex for a SAS protocol specific diagnostic 2# page. It will attempt to put phy identifier 1 of the 3# given device into IDLE (continuously transmit idle dwords) mode. 4# Physical transmission speed is 3 Gbps (last number on first 5# active line can be 8 for 1.5Gbps, 9 for 3Gbps and 10 for 6Gbps). 6# See sdiag_sas_p1_stop.txt to turn off this test pattern. 7# N.B. This will turn the receiver off on phy id 1. 8# 9# Usage example: 'sg_senddiag --pf --raw=- /dev/sg2 < {this_file}' 10# 113f,6,0,1c,1,1,12,9, 120,0,0,0,0,0,0,0, 130,0,0,0,0,0,0,0, 140,0,0,0,0,0,0,0 15