1[ 0.479194] c0 52 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 2[ 0.479207] c0 52 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 3[ 0.480366] c0 52 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 4[ 0.480489] c0 52 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 5[ 0.480503] c0 52 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 6[ 0.481734] c0 52 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0 7[ 0.484091] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu0 8[ 0.484146] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu0 9[ 0.484168] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu1 10[ 0.484206] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu1 11[ 0.484225] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu2 12[ 0.484330] c0 52 clock-cpu-8996: set OPP pair (2150400000 Hz, 970000 uv) on cpu2 13[ 0.484352] c0 52 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu3 14[ 0.484407] c0 52 clock-cpu-8996: set OPP pair (2150400000 Hz, 970000 uv) on cpu3 15[ 0.484553] c0 52 clock-cpu-8996: set OPP pair (192000000 Hz, 535000 uv) on soc:qcom,m4m 16[ 0.484597] c0 52 clock-cpu-8996: set OPP pair (1593600000 Hz, 910000 uv) on soc:qcom,m4m 17[ 0.485061] c0 52 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1 18[ 0.485504] c0 52 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 540000 uV) on b00000.qcom,kgsl-3d0 19[ 0.485534] c0 52 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 880000 uV) on b00000.qcom,kgsl-3d0 20[ 0.487141] c0 52 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks. 21[ 0.487389] c0 52 pmi8994_boost_5v: no parameters 22[ 0.487495] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent 23[ 0.487595] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 24[ 0.487822] c0 52 pmi8994_boost_pin_ctrl: no parameters 25[ 0.487900] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent 26[ 0.487992] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 27[ 0.489154] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues 28[ 0.489182] c0 52 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues 29[ 0.489195] c0 52 msm_thermal:sensor_mgr_init_threshold threshold id already initialized 30[ 0.489213] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues 31[ 0.489230] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues 32[ 0.489600] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 33[ 0.489617] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 34[ 0.489629] c0 52 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 35[ 0.489653] c0 52 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues 36[ 0.490851] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 37[ 0.490926] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 38[ 0.490939] c0 4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 39[ 0.491207] c0 52 pmi8994_boost_5v: no parameters 40[ 0.491340] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent 41[ 0.491440] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517 42[ 0.491671] c0 52 pmi8994_boost_pin_ctrl: no parameters 43[ 0.491750] c0 52 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent 44[ 0.491840] c0 52 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517 45[ 0.539960] c0 1 KPI: Bootloader start count = 32746 46[ 0.539980] c0 1 KPI: Bootloader end count = 79711 47[ 0.539990] c0 1 KPI: Bootloader display count = 46784 48[ 0.540000] c0 1 KPI: Bootloader load kernel count = 3022 49[ 0.540011] c0 1 KPI: Kernel MPM timestamp = 106988 50[ 0.540680] c0 1 KPI: Kernel MPM Clock frequency = 32768 51[ 0.540711] c0 1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536 52[ 0.540711] c0 1 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1008323382 num_pmics=2 53[ 0.541044] c0 1 gdsc_mmagic_bimc: no parameters 54[ 0.541977] c0 1 usb_otg_vreg: no parameters 55[ 0.542061] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin 56[ 0.542165] c0 1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517 57[ 0.542369] c0 1 rome_vreg: no parameters 58[ 0.543205] c0 1 vgaarb: loaded 59[ 0.545171] c0 1 SCSI subsystem initialized 60[ 0.546535] c0 1 usbcore: registered new interface driver usbfs 61[ 0.546583] c0 1 usbcore: registered new interface driver hub 62[ 0.546798] c0 1 usbcore: registered new device driver usb 63[ 0.547335] c0 1 soc:usb_nop_phy supply vcc not found, using dummy regulator 64[ 0.548228] c0 1 media: Linux media interface: v0.10 65[ 0.548284] c0 1 Linux video capture interface: v2.00 66[ 0.550907] c0 1 cpufreq: driver msm up and running 67[ 0.552705] c0 1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region 68[ 0.553558] c0 1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region 69[ 0.554380] c0 1 ION heap system created 70[ 0.554507] c0 1 ion_heap_create: Heap type is disabled: 1 71[ 0.554516] c0 1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0 72[ 0.554523] c0 1 ION heap adsp created at 0x00000000f6800000 with size 2000000 73[ 0.554533] c0 1 ION heap qsecom created at 0x00000000fe400000 with size 1400000 74[ 0.554544] c0 1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000 75[ 0.554590] c0 1 ION heap secure_heap created 76[ 0.555678] c0 1 msm_bus_fabric_init_driver 77[ 0.560460] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517 78[ 0.560481] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517 79[ 0.564298] c0 1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517 80[ 0.564917] c0 1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517 81[ 0.572331] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 82[ 0.572353] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 83[ 0.572366] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517 84[ 0.572514] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 85[ 0.572543] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 86[ 0.572568] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 87[ 0.572593] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 88[ 0.572618] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 89[ 0.572641] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 90[ 0.572666] c0 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517 91[ 0.575508] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot 92[ 0.575535] c0 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) 93[ 0.575702] c0 1 input: qpnp_pon as /devices/virtual/input/input0 94[ 0.576423] c0 1 pon_spare_reg: no parameters 95[ 0.576497] c0 1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified 96[ 0.576555] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot 97[ 0.576573] c0 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) 98[ 0.576800] c0 1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2 99[ 0.576892] c0 1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0 100[ 0.578508] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized 101[ 0.578525] c0 1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated. 102[ 0.578531] c0 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 103[ 0.580809] c0 1 sps:BAM 0x0000000000684000 is registered. 104[ 0.581999] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized 105[ 0.582253] c0 1 sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20 106[ 0.587924] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized 107[ 0.598063] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized 108[ 0.600653] c0 1 IPA driver initialization was successful. 109[ 0.602226] c0 1 gdsc_mmagic_video: no parameters 110[ 0.602606] c0 1 gdsc_mmagic_mdss: no parameters 111[ 0.602904] c0 1 gdsc_mmagic_camss: no parameters 112[ 0.603276] c0 1 gdsc_venus: no parameters 113[ 0.603313] c0 1 gdsc_venus: supplied by gdsc_mmagic_video 114[ 0.603887] c0 1 gdsc_venus_core0: fast normal 115[ 0.604164] c0 1 gdsc_venus_core1: fast normal 116[ 0.604420] c0 1 gdsc_camss_top: no parameters 117[ 0.604456] c0 1 gdsc_camss_top: supplied by gdsc_mmagic_camss 118[ 0.604745] c0 1 gdsc_vfe0: no parameters 119[ 0.604777] c0 1 gdsc_vfe0: supplied by gdsc_camss_top 120[ 0.605075] c0 1 gdsc_vfe1: no parameters 121[ 0.605105] c0 1 gdsc_vfe1: supplied by gdsc_camss_top 122[ 0.605358] c0 1 gdsc_mdss: no parameters 123[ 0.605398] c0 1 gdsc_mdss: supplied by gdsc_mmagic_mdss 124[ 0.605858] c0 1 gdsc_jpeg: no parameters 125[ 0.605888] c0 1 gdsc_jpeg: supplied by gdsc_camss_top 126[ 0.606195] c0 1 gdsc_cpp: no parameters 127[ 0.606225] c0 1 gdsc_cpp: supplied by gdsc_camss_top 128[ 0.606440] c0 1 gdsc_pcie_0: no parameters 129[ 0.606635] c0 1 gdsc_pcie_1: no parameters 130[ 0.606979] c0 1 gdsc_pcie_2: no parameters 131[ 0.607170] c0 1 gdsc_usb30: no parameters 132[ 0.607375] c0 1 gdsc_ufs: no parameters 133[ 0.607776] c0 1 gdsc_fd: no parameters 134[ 0.607808] c0 1 gdsc_fd: supplied by gdsc_camss_top 135[ 0.608025] c0 1 gdsc_gpu: no parameters 136[ 0.608328] c0 1 gdsc_gpu_gx: no parameters 137[ 0.608718] c0 1 gdsc_gpu_gx: supplied by gfx_corner 138[ 0.609086] c0 1 gdsc_hlos1_vote_aggre0_noc: no parameters 139[ 0.609298] c0 1 gdsc_hlos1_vote_lpass_adsp: no parameters 140[ 0.609488] c0 1 gdsc_hlos1_vote_lpass_core: no parameters 141[ 0.609695] c0 1 gdsc_aggre0_noc: no parameters 142[ 0.612586] c0 1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL 143[ 0.612653] c0 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled 144[ 0.615647] c0 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully 145[ 0.615803] c0 1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL 146[ 0.615819] c0 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled 147[ 0.617014] c0 1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock 148[ 0.617725] c0 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully 149[ 0.617812] c0 1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL 150[ 0.617825] c0 1 mdss_pll_probe: Unable to get the cell-index rc=-22 151[ 0.819694] c0 1 esoc bus registration done 152[ 0.819789] c0 1 Advanced Linux Sound Architecture Driver Initialized. 153[ 0.820610] c0 1 Bluetooth: ffffffc0f983fcf8 154[ 0.820674] c0 1 NET: Registered protocol family 31 155[ 0.820688] c0 1 Bluetooth: ffffffc0f983fcf8 156[ 0.820701] c0 1 Bluetooth: ffffffc0f983fcd8Bluetooth: ffffffc0f983fca8 157[ 0.820748] c0 1 Bluetooth: ffffffc0f983fcb8<6>[ 0.821261] c0 4 cfg80211: Calling CRDA to update world regulatory domain 158[ 0.821303] c0 4 cfg80211: World regulatory domain updated: 159[ 0.821314] c0 4 cfg80211: DFS Master region: unset 160[ 0.821323] c0 4 cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) 161[ 0.821339] c0 4 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 162[ 0.821348] c0 4 cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) 163[ 0.821357] c0 4 cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) 164[ 0.821365] c0 4 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 165[ 0.821374] c0 4 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 166[ 0.821382] c0 4 cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 167[ 0.821390] c0 4 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) 168[ 0.821399] c0 4 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) 169[ 0.821872] c0 1 pcie:pcie_init. 170[ 0.826660] c0 1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator 171[ 0.830867] c0 1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource. 172[ 0.834442] c1 52 pmi8994_boost_5v: no parameters 173[ 0.834920] c1 52 pmi8994_boost_5v: supplied by pon_spare_reg 174[ 0.835461] c1 52 pmi8994_boost_pin_ctrl: no parameters 175[ 0.835666] c1 52 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg 176[ 0.836317] c1 52 ibb_reg: 4600 <--> 6000 mV at 5500 mV 177[ 0.836835] c1 52 lab_reg: 4600 <--> 6000 mV at 5500 mV 178[ 0.837577] c1 52 usb_otg_vreg: no parameters 179[ 0.837734] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin 180[ 0.837866] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517 181[ 0.839510] c0 1 Switched to clocksource arch_sys_counter 182[ 0.872524] c0 1 bcl_peripheral:bcl_perph_init BCL Initialized 183[ 0.882199] c0 1 NET: Registered protocol family 2 184[ 0.883086] c0 1 TCP established hash table entries: 32768 (order: 6, 262144 bytes) 185[ 0.883209] c0 1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 186[ 0.883968] c0 1 TCP: Hash tables configured (established 32768 bind 32768) 187[ 0.884184] c0 1 TCP: reno registered 188[ 0.884214] c0 1 UDP hash table entries: 2048 (order: 4, 65536 bytes) 189[ 0.884259] c0 1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 190[ 0.884698] c0 1 NET: Registered protocol family 1 191[ 0.884769] c0 1 PCI: CLS 0 bytes, default 128 192[ 0.886060] c1 52 usb_otg_vreg: no parameters 193[ 0.886237] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin 194[ 0.886357] c1 52 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517 195[ 0.889486] c0 1 kryo perfevents: CPU pmu for kryo-pmuv3 detected 196[ 0.897194] c1 1 futex hash table entries: 1024 (order: 5, 131072 bytes) 197[ 0.897341] c1 1 Initialise system trusted keyring 198[ 0.897436] c1 1 audit: initializing netlink subsys (disabled) 199[ 0.897582] c1 1 audit: type=2000 audit(0.896:1): initialized 200[ 0.898657] c1 1 vmscan: error setting kswapd cpu affinity mask 201[ 0.903875] c1 1 Registering sdcardfs 0.1 202[ 0.904127] c1 1 fuse init (API version 7.23) 203[ 0.904409] c1 1 SELinux: Registering netfilter hooks 204[ 0.904836] c1 1 pfk [pfk_init]: Driver initialized successfully 205[ 0.907444] c1 1 Key type asymmetric registered 206[ 0.907479] c1 1 Asymmetric key parser 'x509' registered 207[ 0.907492] c1 1 Key type pkcs7_test registered 208[ 0.907764] c1 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) 209[ 0.907783] c1 1 io scheduler noop registered 210[ 0.907796] c1 1 io scheduler deadline registered 211[ 0.907925] c1 1 io scheduler cfq registered (default) 212[ 0.907940] c1 1 io scheduler test-iosched registered 213[ 0.927974] c1 1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk 214[ 0.929651] c1 1 No change in context(0==0), skip 215[ 0.930989] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 216[ 0.931007] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1 217[ 0.931015] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2 218[ 0.931023] c1 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3 219[ 0.931042] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4 220[ 0.931049] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5 221[ 0.931056] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6 222[ 0.931063] c1 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7 223[ 0.931079] c1 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8 224[ 0.931087] c1 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9 225[ 0.931104] c1 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 226[ 0.931111] c1 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1 227[ 0.931124] c1 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read 228[ 0.931215] c1 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read 229[ 0.931875] c1 1 xlog_status: enable:1, panic:1, dump:2 230[ 0.932228] c1 1 OF: no ranges; cannot translate 231[ 0.932246] c1 1 OF: no ranges; cannot translate 232[ 0.933040] c1 1 OF: no ranges; cannot translate 233[ 0.933060] c1 1 OF: no ranges; cannot translate 234[ 0.933637] c1 1 OF: no ranges; cannot translate 235[ 0.933660] c1 1 OF: no ranges; cannot translate 236[ 0.934126] c1 1 OF: no ranges; cannot translate 237[ 0.934143] c1 1 OF: no ranges; cannot translate 238[ 0.934602] c1 1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00000100 239[ 0.936450] c1 1 mdss_rotator_init_queue: work thread name=rot_thread_0 240[ 0.936828] c1 1 mdss_rotator_init_queue: work thread name=rot_thread_1 241[ 0.942202] c1 1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! 242[ 0.942446] c1 1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful! 243[ 0.942621] c1 1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! 244[ 0.942818] c1 1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful! 245[ 0.947164] c1 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 246[ 0.947683] c1 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd 247[ 0.947717] c1 1 mdss_dsi_panel_init: Panel Name = S1 FHD SAMSUNG EA8064TG 5.0 command mode panel 248[ 0.947824] c1 1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd" (ffffffc0f983f2d8) 249[ 0.947844] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command 250[ 0.947855] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command 251[ 0.947863] c1 1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: 252[ 0.947951] c1 1 mdss_dsi_parse_panel_features: partial_update_enabled=0 253[ 0.947962] c1 1 mdss_dsi_parse_panel_features: ulps feature disabled 254[ 0.947970] c1 1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled 255[ 0.947979] c1 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 256[ 0.947996] c1 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command 257[ 0.948050] c1 1 mdss_dsi_parse_rgb_gain: PA[0] = 0x2604 258[ 0.948056] c1 1 mdss_dsi_parse_rgb_gain: PA[1] = 0x12a 259[ 0.948062] c1 1 mdss_dsi_parse_rgb_gain: PA[2] = 0x107 260[ 0.948067] c1 1 mdss_dsi_parse_rgb_gain: PA[3] = 0x153 261[ 0.948074] c1 1 mdss_dsi_parse_rgb_gain: R = 0x122, G = 0xff B = 0x149 262[ 0.948343] c1 1 mdss_dsi_parse_ctrl_params:3904 Unable to read qcom,display-id, data=0000000000000000,len=20 263[ 0.948530] c1 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified 264[ 0.948595] c1 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found 265[ 0.948623] c1 1 mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed 266[ 0.948632] c1 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b96000 ctrl_size=400 phy_base=ffffff8001b98400 phy_size=588 267[ 0.948955] c1 1 dsi_panel_device_register: Continuous splash enabled 268[ 0.949650] c1 1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0 269[ 0.962341] c1 1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2 270[ 0.963724] c1 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1 271[ 0.964260] c1 1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi panel_name:none 272[ 0.964273] c1 1 mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_samsung_ea8064tg_1080p_cmd:1:none:cfg:single_dsi 273[ 0.964280] c1 1 mdss_dsi_ctrl_probe: panel configuration failed 274[ 0.964315] c1 1 mdss_dsi_ctrl: probe of 996000.qcom,mdss_dsi_ctrl1 failed with error -22 275[ 0.965990] c1 1 mdss_dsi_status_init: DSI status check interval:3000 276[ 0.966512] c1 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 277[ 0.966636] c1 1 hdmi_tx_get_dt_data:4349 Unable to read qcom,display-id, data=0000000000000000,len=0 278[ 0.966838] c1 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 279[ 0.966856] c1 1 hdmi_tx_pinctrl_init: failed to get pinctrl 280[ 0.966885] c1 1 hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001b9c000, len=0x50c 281[ 0.966896] c1 1 hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001bb8000, len=0x6158 282[ 0.966994] c1 1 hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001b9e000, len=0xfff 283[ 0.968401] c1 1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx 284[ 0.971610] c1 1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel 285[ 0.975296] c1 1 mdss_fb_probe: fb0: split_mode:0 left:0 right:0 286[ 0.975918] c1 1 mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully! 287[ 0.977583] c1 1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0 288[ 0.977753] c1 1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully! 289[ 0.978307] c1 1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1 290[ 0.984142] c1 1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0 291[ 0.984349] c1 1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully! 292[ 0.984443] c1 1 mdss_mdp_splash_parse_dt: splash mem child node is not present 293[ 1.014183] c1 1 In memshare_probe, Memshare probe success 294[ 1.016898] c1 1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file fail 295[ 1.016935] c1 1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12 296[ 1.024915] c1 1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs 297[ 1.026565] c1 1 msm_rpm_log_probe: OK 298[ 1.028913] c1 1 RPM Version: 148.0.5 299[ 1.034384] c1 1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped. 300[ 1.035553] c1 1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped. 301[ 1.039960] c0 4 smd_channel_probe_now: allocation table not initialized 302[ 1.040344] c1 1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id. 303[ 1.045705] c1 1 input: qbt1000_key_input as /devices/virtual/input/input2 304[ 1.048307] c1 1 uart_tx_gpio is not available 305[ 1.048335] c1 1 uart_rx_gpio is not available 306[ 1.048342] c1 1 uart_cts_gpio is not available 307[ 1.048349] c1 1 uart_rfr_gpio is not available 308[ 1.049718] c1 1 sps: BAM device 0x0000000007544000 is not registered yet. 309[ 1.049935] c1 1 sps:BAM 0x0000000007544000 is registered. 310[ 1.051701] c1 1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART 311[ 1.054401] c1 1 msm_serial_hs module loaded 312[ 1.055465] c1 1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe(). 313[ 1.056983] c1 1 msm_serial_hsl_init: driver initialized 314[ 1.074166] c2 1 kgsl: use zap firmware : a530_zap_signed 315[ 1.111542] c2 1 brd: module loaded 316[ 1.112652] c2 1 loop: module loaded 317[ 1.112830] c2 1 zram: Created 1 device(s) ... 318[ 1.114011] c2 1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000 319[ 1.114055] c2 1 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE 320[ 1.114064] c2 1 QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.114074] c2 1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2 321[ 1.114536] c2 1 QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 322[ 1.118421] c2 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active 323[ 1.118445] c2 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_reset 324[ 1.118451] c2 1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active 325[ 1.118486] c2 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset' 326[ 1.118503] c2 1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active' 327[ 1.118806] c2 1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok 328[ 1.119143] c2 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method 329[ 1.119148] c2 1 i2c-core: driver [tabla-i2c-core] using legacy resume method 330[ 1.119209] c2 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method 331[ 1.119215] c2 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method 332[ 1.119262] c2 1 i2c-core: driver [tasha-i2c-core] using legacy suspend method 333[ 1.119268] c2 1 i2c-core: driver [tasha-i2c-core] using legacy resume method 334[ 1.121172] c2 1 [NFC] pn551_dev_init: Loading pn551 driver 335[ 1.121249] c2 1 [NFC] pn551_probe: 336[ 1.121385] c2 1 [NFC] pn551_probe : vreg_l6 regulator_get 337[ 1.121410] c2 1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage 338[ 1.121419] c2 1 [NFC] pn551_probe : vreg_l6 regulator_enable 339[ 1.121425] c2 1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1 340[ 1.121432] c2 1 [NFC] pn551_parse_dt: Start 341[ 1.121440] c2 1 [NFC] pn551_parse_dt:ven_isinvert = 0 342[ 1.121444] c2 1 [NFC] pn551_parse_dt: chk irq-gpio 343[ 1.121633] c2 1 [NFC] pn551_parse_dt: chk ven-gpio 344[ 1.121656] c2 1 [NFC] pn551_parse_dt: chk fwdl-gpio 345[ 1.121678] c2 1 [NFC] pn551_parse_dt: chk nfc_i2c pins 346[ 1.121717] c2 1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74 347[ 1.121740] c2 1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1 348[ 1.121757] c2 1 [NFC] pn551_probe : irq_gpio set input 0 349[ 1.121770] c2 1 [NFC] pn551_probe : ven_gpio set 0 0 350[ 1.121779] c2 1 [NFC] pn551_probe : firm_gpio set 0 0 351[ 1.121785] c2 1 [NFC] pn551_probe: init io_wake_lock 352[ 1.121881] c2 1 [NFC] pn551_probe : requesting IRQ 405 353[ 1.122007] c2 1 [NFC] pn551_probe: Turn off NFC VEN by default 354[ 1.122014] c2 1 [NFC] pn551_Disable: gpio=12 set_value=0 355[ 1.122032] c2 1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0 356[ 1.122037] c2 1 [NFC] pn551_probe: Probe success! 357[ 1.122057] c2 1 i2c-core: driver [pn551] using legacy suspend method 358[ 1.122062] c2 1 i2c-core: driver [pn551] using legacy resume method 359[ 1.123314] c2 1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000 360[ 1.123334] c2 1 qce 660000.qcedev: CE device = 0x0 361[ 1.123334] c2 1 , IO base, CE = 0xffffff8003640000 362[ 1.123334] c2 1 , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 363[ 1.123334] c2 1 IO base BAM = 0x (null) 364[ 1.123334] c2 1 BAM IRQ 247 365[ 1.123334] c2 1 Engines Availability = 0x2011053 366[ 1.123633] c2 1 sps:BAM 0x0000000000644000 is registered. 367[ 1.123877] c2 1 sps:BAM 0x0000000000644000 (va:0xffffff80036c0000) enabled: ver:0x27, number of pipes:16 368[ 1.124118] c2 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247 369[ 1.132920] c2 1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000 370[ 1.132947] c2 1 qcrypto 660000.qcrypto: CE device = 0x0 371[ 1.132947] c2 1 , IO base, CE = 0xffffff8003700000 372[ 1.132947] c2 1 , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 373[ 1.132947] c2 1 IO base BAM = 0x (null) 374[ 1.132947] c2 1 BAM IRQ 247 375[ 1.132947] c2 1 Engines Availability = 0x2011053 376[ 1.133322] c2 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247 377[ 1.139677] c2 1 qcrypto 660000.qcrypto: qcrypto-ecb-aes 378[ 1.139805] c2 1 qcrypto 660000.qcrypto: qcrypto-cbc-aes 379[ 1.139919] c2 1 qcrypto 660000.qcrypto: qcrypto-ctr-aes 380[ 1.140042] c2 1 qcrypto 660000.qcrypto: qcrypto-ecb-des 381[ 1.140155] c2 1 qcrypto 660000.qcrypto: qcrypto-cbc-des 382[ 1.140328] c2 1 qcrypto 660000.qcrypto: qcrypto-ecb-3des 383[ 1.140411] c2 1 qcrypto 660000.qcrypto: qcrypto-cbc-3des 384[ 1.140506] c2 1 qcrypto 660000.qcrypto: qcrypto-xts-aes 385[ 1.140644] c3 1 qcrypto 660000.qcrypto: qcrypto-sha1 386[ 1.140731] c3 1 qcrypto 660000.qcrypto: qcrypto-sha256 387[ 1.140822] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes 388[ 1.140910] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des 389[ 1.140992] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des 390[ 1.141075] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes 391[ 1.141159] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des 392[ 1.141239] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des 393[ 1.141322] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1 394[ 1.141403] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256 395[ 1.141484] c3 1 qcrypto 660000.qcrypto: qcrypto-aes-ccm 396[ 1.141567] c3 1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm 397[ 1.144768] c3 1 ICE IRQ = 30 398[ 1.144925] c3 1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed 399[ 1.144969] c3 1 ICE IRQ = 31 400[ 1.149837] c3 1 qcom_ice_get_pdevice: found ice device ffffffc03202a000 401[ 1.149857] c3 1 qcom_ice_get_pdevice: matching platform device ffffffc0f9233400 402[ 1.150459] c3 1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0 403[ 1.151079] c3 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2 404[ 1.151089] c3 1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2 405[ 1.152170] c3 1 scsi host0: ufshcd 406[ 1.155823] c3 1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002350000 407[ 1.161940] c3 1 SCSI Media Changer driver v0.25 408[ 1.164003] c3 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 409[ 1.166283] c3 1 spi_master spi6: will run message pump with realtime priority 410[ 1.167885] c3 1 sps:BAM 0x0000000007544000 (va:0xffffff80024c0000) enabled: ver:0x19, number of pipes:24 411[ 1.168692] c3 1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) 412[ 1.169771] c3 1 tun: Universal TUN/TAP device driver, 1.6 413[ 1.169779] c3 1 tun: (C) 1999-2004 Max Krasnyansky <[email protected]> 414[ 1.169840] c3 1 PPP generic driver version 2.4.2 415[ 1.169908] c3 1 PPP BSD Compression module registered 416[ 1.169917] c3 1 PPP Deflate Compression module registered 417[ 1.169947] c3 1 PPP MPPE Compression module registered 418[ 1.169958] c3 1 NET: Registered protocol family 24 419[ 1.179461] c1 52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 420[ 1.203394] c3 1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. 421[ 1.207226] c3 1 msm_pcie_enable: PCIe RC0 PHY is ready! 422[ 1.217330] c3 1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. 423[ 1.259343] c3 1 msm_pcie_enable: PCIe RC0 link initialized 424[ 1.259461] c3 1 PCI host bridge /soc/qcom,pcie@00600000 ranges: 425[ 1.259476] c3 1 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff] 426[ 1.259500] c3 1 IO 0x0c200000..0x0c2fffff -> 0x0c200000 427[ 1.259512] c3 1 MEM 0x0c300000..0x0cffffff -> 0x0c300000 428[ 1.269663] c3 1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00 429[ 1.269674] c3 1 pci_bus 0000:00: root bus resource [bus 00-ff] 430[ 1.269682] c3 1 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) 431[ 1.269690] c3 1 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] 432[ 1.269748] c3 1 pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 433[ 1.269842] c3 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs 434[ 1.269854] c3 1 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] 435[ 1.269904] c3 1 pci 0000:00:00.0: IOMMU is currently not supported for PCI 436[ 1.269987] c3 1 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold 437[ 1.270042] c3 1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19 438[ 1.270240] c3 1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 439[ 1.270435] c3 1 pci 0000:01:00.0: [168c:003e] type 00 class 0x028000 440[ 1.270579] c3 1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs 441[ 1.270589] c3 1 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] 442[ 1.270738] c3 1 pci 0000:01:00.0: IOMMU is currently not supported for PCI 443[ 1.270902] c3 1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold 444[ 1.271371] c3 1 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 445[ 1.271477] c3 1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs 446[ 1.271504] c3 1 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff] 447[ 1.271512] c3 1 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit] 448[ 1.271561] c3 1 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] 449[ 1.271790] c3 1 pci 0000:00:00.0: PCI bridge to [bus 01] 450[ 1.271823] c3 1 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff] 451[ 1.273261] c3 1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped. 452[ 1.285484] c3 1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0. 453[ 1.287864] c3 1 cnss: Platform driver probed successfully. 454[ 1.290568] c3 1 usbcore: registered new interface driver asix 455[ 1.290603] c3 1 usbcore: registered new interface driver ax88179_178a 456[ 1.290625] c3 1 usbcore: registered new interface driver cdc_ether 457[ 1.290645] c3 1 usbcore: registered new interface driver net1080 458[ 1.290667] c3 1 usbcore: registered new interface driver cdc_subset 459[ 1.290688] c3 1 usbcore: registered new interface driver zaurus 460[ 1.290995] c3 1 usbcore: registered new interface driver cdc_ncm 461[ 1.291575] c3 250 msm_sharedmem: sharedmem_register_qmi: qmi init successful 462[ 1.295449] c3 1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' 463[ 1.297905] c3 1 rtel: rtel_probe: Device created for client 'rtel' 464[ 1.304580] c3 1 msm-dwc3 6a00000.ssusb: unable to get dbm device 465[ 1.307951] c3 1 usbcore: registered new interface driver usb-storage 466[ 1.307989] c3 1 usbcore: registered new interface driver ums-alauda 467[ 1.308010] c3 1 usbcore: registered new interface driver ums-cypress 468[ 1.308028] c3 1 usbcore: registered new interface driver ums-datafab 469[ 1.308046] c3 1 usbcore: registered new interface driver ums-freecom 470[ 1.308063] c3 1 usbcore: registered new interface driver ums-isd200 471[ 1.308083] c3 1 usbcore: registered new interface driver ums-jumpshot 472[ 1.308101] c3 1 usbcore: registered new interface driver ums-karma 473[ 1.308119] c3 1 usbcore: registered new interface driver ums-sddr09 474[ 1.308136] c3 1 usbcore: registered new interface driver ums-sddr55 475[ 1.308153] c3 1 usbcore: registered new interface driver ums-usbat 476[ 1.308225] c3 1 usbcore: registered new interface driver usbserial 477[ 1.308248] c3 1 usbcore: registered new interface driver usb_ehset_test 478[ 1.309280] c3 1 fusb302 9-0022: fusb30x_probe 479[ 1.309292] c3 1 FUSB [fusb30x_SetChip] chip->client addr = 0x22 480[ 1.310509] c3 1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok) 481[ 1.311175] c3 1 FUSB fusb_InitializeGPIO - INT_N GPIO initialized as pin '124' 482[ 1.311188] c3 1 fusb_InitializeGPIO - Warning: Could not get GPIO for Debug GPIO! Error code: -2 483[ 1.315133] c3 1 FUSB platform_notify_cc_orientation: orientation=[0], CC1=[5], CC2=[5] 484[ 1.315782] c3 1 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x0), pd_state(0x0) 485[ 1.317010] c3 1 fusb302 9-0022: FUSB fusb30x_probe - FUSB30X Driver loaded successfully! 486[ 1.317701] c2 1 gbridge_init: gbridge_init successs. 487[ 1.317857] c2 1 mousedev: PS/2 mouse device common for all mice 488[ 1.318056] c2 1 usbcore: registered new interface driver xpad 489[ 1.318990] c2 1 [TP]: parse_config 490[ 1.319840] c0 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 491[ 1.319860] c0 258 FUSB StateMachineTypeC: enter 492[ 1.320620] c0 258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 0 493[ 1.350545] c2 1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok) 494[ 1.350959] c2 1 [TP]:check_chip_exist: Synaptics chip exist 495[ 1.359271] c2 1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28 496[ 1.359885] c2 1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919) 497[ 1.360126] c2 1 [TP]:synaptics_rmi4_f12_init report data init done 498[ 1.367723] c2 1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782 499[ 1.368644] c2 1 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000 500[ 1.369085] c2 1 input: synaptics_dsxv26 as /devices/soc/7577000.i2c/i2c-3/3-0020/input/input3 501[ 1.369412] c2 1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled 502[ 1.371964] c2 1 input: hbtp_vm as /devices/virtual/input/input4 503[ 1.372153] c2 1 [LASER] stmvl53l0_init: Enter 504[ 1.372160] c2 1 [LASER] stmvl53l0_init_i2c: Enter 505[ 1.372966] c2 1 [LASER] stmvl53l0_probe: Enter++ 506[ 1.373015] c2 1 [LASER] Laser_parse_dt: pwdn_gpio = 94 507[ 1.373157] c2 1 [LASER] Laser_parse_dt: laser_irq_gpio = 62 508[ 1.373177] c2 1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768 509[ 1.373183] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67 510[ 1.373188] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00 511[ 1.373193] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 04 512[ 1.373198] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 18 513[ 1.373203] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67 514[ 1.373209] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00 515[ 1.373213] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 05 516[ 1.373219] c2 1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00 517[ 1.373224] c2 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 24 518[ 1.373229] c2 1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x5 519[ 1.373234] c2 1 [LASER] Laser_parse_dt: Update SpadCount = 4 and IsAperture = 0 520[ 1.373240] c2 1 [LASER] stmvl53l0_parse_vdd: Enter++ 521[ 1.373295] c2 1 12-0029 supply vdd not found, using dummy regulator 522[ 1.373328] c2 1 [LASER] stmvl53l0_parse_vdd: End-- 523[ 1.373333] c2 1 [LASER] Laser_pinctrl_init: Enter++ 524[ 1.373637] c2 1 [LASER] Laser_pinctrl_init: End-- 525[ 1.373647] c2 1 [LASER] stmvl53l0_setup: Enter++ 526[ 1.373670] c2 1 [LASER] stmvl53l0_setup: register_irq: 417 527[ 1.374006] c2 1 [LASER] stmvl53l0_setup: interrupt is hooked 528[ 1.374141] c2 1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input5 529[ 1.374198] c2 1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029 530[ 1.374788] c2 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok) 531[ 1.375158] c2 1 [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10 532[ 1.375158] c2 1 API_VERSION: 1.1.20.2 533[ 1.375165] c2 1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1 534[ 1.375177] c2 1 [LASER] stmvl53l0_init_client: Enter 535[ 1.375182] c2 1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit 536[ 1.379655] c1 52 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2 537[ 1.380354] c1 52 scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 538[ 1.381418] c1 52 scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 539[ 1.382325] c2 1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit 540[ 1.382449] c1 52 scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 541[ 1.383733] c3 6 scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 542[ 1.384611] c3 6 scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 543[ 1.385176] c3 6 scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 544[ 1.385739] c3 6 scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 545[ 1.386305] c3 6 scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 546[ 1.386877] c3 6 scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG8J1CB-B0B1 0700 PQ: 0 ANSI: 6 547[ 1.387798] c0 58 sd 0:0:0:0: [sda] 16384-byte physical blocks 548[ 1.389080] c1 52 sd 0:0:0:2: [sdc] 16384-byte physical blocks 549[ 1.389084] c3 6 sd 0:0:0:1: [sdb] 16384-byte physical blocks 550[ 1.390150] c0 58 sd 0:0:0:0: [sda] 16384-byte physical blocks 551[ 1.390852] c3 6 sd 0:0:0:1: [sdb] 16384-byte physical blocks 552[ 1.390910] c1 52 sd 0:0:0:2: [sdc] 16384-byte physical blocks 553[ 1.393714] c3 6 sdb: sdb1 554[ 1.394091] c1 52 sdc: sdc1 555[ 1.394221] c3 6 sd 0:0:0:1: [sdb] 16384-byte physical blocks 556[ 1.394320] c0 268 sd 0:0:0:3: [sdd] 16384-byte physical blocks 557[ 1.394836] c1 52 sd 0:0:0:2: [sdc] 16384-byte physical blocks 558[ 1.396425] c0 58 sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 559[ 1.397027] c3 6 sd 0:0:0:4: [sde] 16384-byte physical blocks 560[ 1.397681] c1 52 sd 0:0:0:5: [sdf] 16384-byte physical blocks 561[ 1.398970] c3 6 sd 0:0:0:4: [sde] 16384-byte physical blocks 562[ 1.400145] c1 52 sd 0:0:0:5: [sdf] 16384-byte physical blocks 563[ 1.401439] c3 6 sde: sde1 sde2 sde3 sde4 sde5 sde6 564[ 1.402373] c3 6 sd 0:0:0:4: [sde] 16384-byte physical blocks 565[ 1.402709] c1 52 sdf: sdf1 sdf2 sdf3 sdf4 sdf5 566[ 1.403975] c1 52 sd 0:0:0:5: [sdf] 16384-byte physical blocks 567[ 1.404614] c0 58 sd 0:0:0:0: [sda] 16384-byte physical blocks 568[ 1.405086] c2 268 sd 0:0:0:3: [sdd] 16384-byte physical blocks 569[ 1.407723] c2 268 sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 570[ 1.408873] c2 268 sd 0:0:0:3: [sdd] 16384-byte physical blocks 571[ 1.431489] c0 0 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0 572[ 1.431505] c0 0 ->handle_irq(): ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148 573[ 1.431532] c0 0 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8 574[ 1.431552] c0 0 ->action(): (null) 575[ 1.431557] c0 0 IRQ_NOPROBE set 576[ 1.431563] c0 0 IRQ_NOREQUEST set 577[ 1.431568] c0 0 IRQ_NOTHREAD set 578[ 1.445227] c2 1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 28 and PhaseCal = 1 579[ 1.446436] c2 1 [LASER] stmvl53l0_init_client: Set refSpadCount = 4 and isApertureSpads = 0 580[ 1.446596] c2 1 [LASER] stmvl53l0_init_client: Set offset = 24 581[ 1.446899] c2 1 [LASER] stmvl53l0_init_client: Set xtalk = 0x5 582[ 1.446906] c2 1 [LASER] stmvl53l0_init_client: Set RIT - 68 583[ 1.446911] c2 1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode 584[ 1.447262] c2 1 [LASER] stmvl53l0_init_client: End 585[ 1.447270] c2 1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled 586[ 1.447275] c2 1 [LASER] stmvl53l0_setup: End-- 587[ 1.447280] c2 1 [LASER] stmvl53l0_probe: Success-- 588[ 1.447344] c2 1 [LASER] stmvl53l0_init_i2c: End with rc:0 589[ 1.447351] c2 1 [LASER] stmvl53l0_init: End 590[ 1.448910] c2 1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0 591[ 1.449142] c2 1 i2c /dev entries driver 592[ 1.449371] c2 1 [AUD] tfa9888: tfa9888_init 593[ 1.449412] c2 1 i2c-core: driver [tfa9888] using legacy suspend method 594[ 1.449417] c2 1 i2c-core: driver [tfa9888] using legacy resume method 595[ 1.484175] c2 1 vmem: Up and running with 4 banks of memory from [io size 0x3f06c4e4c9 disabled] 596[ 1.502985] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed 597[ 1.503010] c2 1 msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl 598[ 1.503125] c2 1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22 599[ 1.505042] c2 1 msm_eeprom_platform_probe failed 1673 600[ 1.505676] c2 1 msm_eeprom_platform_probe failed 1673 601[ 1.507495] c2 1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed 602[ 1.507513] c2 1 msm_ois_platform_probe:739 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl 603[ 1.507625] c2 1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22 604[ 1.511928] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 605[ 1.517741] c2 1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000 606[ 1.517767] c2 1 MSM-CPP cpp_init_hardware:881 stream_cnt:0 607[ 1.531475] c2 1 __msm_jpeg_init:1537] Jpeg Device id 0 608[ 1.532553] c2 1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3 609[ 1.537936] c2 1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist 610[ 1.636718] c2 1 msm_fd aa4000.qcom,fd: Face detection halt timeout 611[ 1.638599] c2 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok) 612[ 1.639014] c2 1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed. 613[ 1.641296] c2 1 htc_battery_init: can't find compatible 'htc,htc_battery_store' 614[ 1.641632] c3 58 ------------[ cut here ]------------ 615[ 1.641660] c3 58 WARNING: CPU: 3 PID: 58 at /usr/local/google/buildbot/src/partner-android/n-dev-msm-marlin-3.18-nyc-mr2/private/msm-google/include/linux/of.h:770 fg_probe+0x2494/0x26cc() 616[ 1.641673] c3 58 CPU: 3 PID: 58 Comm: kworker/u8:2 Not tainted 3.18.31-g80c8372084ef #1 617[ 1.641679] c3 58 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Sailfish A (DT) 618[ 1.641697] c3 58 Workqueue: events_unbound async_run_entry_fn 619[ 1.641708] c3 58 Call trace: 620[ 1.641721] c3 58 [<ffffffc00008ac00>] dump_backtrace+0x0/0x134 621[ 1.641727] c3 58 [<ffffffc00008ad48>] show_stack+0x14/0x1c 622[ 1.641746] c3 58 [<ffffffc000e23b88>] dump_stack+0x88/0xac 623[ 1.641755] c3 58 [<ffffffc0000a4050>] warn_slowpath_common+0x88/0xb0 624[ 1.641760] c3 58 [<ffffffc0000a41bc>] warn_slowpath_null+0x18/0x20 625[ 1.641766] c3 58 [<ffffffc000792a8c>] fg_probe+0x2494/0x26cc 626[ 1.641779] c3 58 [<ffffffc000a91404>] spmi_drv_probe+0x14/0x1c 627[ 1.641791] c3 58 [<ffffffc0005022a0>] driver_probe_device+0xd4/0x224 628[ 1.641797] c3 58 [<ffffffc0005024a0>] __driver_attach+0x64/0x90 629[ 1.641809] c3 58 [<ffffffc0005009c0>] bus_for_each_dev+0x80/0xb0 630[ 1.641815] c3 58 [<ffffffc000502588>] driver_attach+0x20/0x28 631[ 1.641820] c3 58 [<ffffffc000501294>] bus_add_driver+0xf0/0x1c0 632[ 1.641826] c3 58 [<ffffffc000502fbc>] driver_register+0x94/0xe0 633[ 1.641832] c3 58 [<ffffffc000a92128>] spmi_driver_register+0x5c/0x64 634[ 1.641842] c3 58 [<ffffffc0014db808>] fg_init_async+0x18/0x20 635[ 1.641848] c3 58 [<ffffffc0000c118c>] async_run_entry_fn+0x48/0xf8 636[ 1.641857] c3 58 [<ffffffc0000b9550>] process_one_work+0x25c/0x43c 637[ 1.641863] c3 58 [<ffffffc0000b9a54>] worker_thread+0x324/0x440 638[ 1.641871] c3 58 [<ffffffc0000be8c8>] kthread+0xec/0xf4 639[ 1.641948] c3 58 ---[ end trace 4895c8af61984df9 ]--- 640[ 1.642892] c2 1 [BATT] Probe process: (2, 1) 641[ 1.642935] c1 268 [BATT] htc_battery_fb_register in 642[ 1.642935] c2 1 [BATT] htc_battery_init done. 643[ 1.643980] c1 58 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19 644[ 1.644736] c2 1 set restart reason = 0x776655AA 645[ 1.644747] c2 1 set restart msg = 'Unknown' 646[ 1.645637] c1 18 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038 647[ 1.646554] c2 1 unable to find DT imem DLOAD mode node 648[ 1.648496] c2 1 unable to find DT imem EDLOAD mode node 649[ 1.681638] c2 1 device-mapper: uevent: version 1.0.3 650[ 1.681800] c2 1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected] 651[ 1.681936] c2 1 device-mapper: req-crypt: dm-req-crypt successfully initalized. 652[ 1.681936] c2 1 653[ 1.683664] c2 1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property 654[ 1.683810] c2 1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property 655[ 1.683817] c2 1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree 656[ 1.683823] c2 1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree 657[ 1.684559] c2 1 sdhci: Secure Digital Host Controller Interface driver 658[ 1.684566] c2 1 sdhci: Copyright(c) Pierre Ossman 659[ 1.684573] c2 1 sdhci-pltfm: SDHCI platform and OF driver helper 660[ 1.685586] c2 1 qcom_ice_get_pdevice: found ice device ffffffc03202a400 661[ 1.685595] c2 1 qcom_ice_get_pdevice: matching platform device ffffffc0f9233800 662[ 1.685793] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 663[ 1.685838] c2 1 sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled 664[ 1.686017] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 665[ 1.686028] c2 1 sdhci_msm 74a4900.sdhci: Parsing Pinctrl failed with -22, falling back on GPIO lib 666[ 1.688216] c2 1 pm8994_l21: requested voltage range [2950000, 2950000] does not fit within constraints: [3000000, 3300000] 667[ 1.688231] c2 1 sdhci_msm_vreg_set_voltage: regulator_set_voltage(vdd)failed. min_uV=2950000,max_uV=2950000,ret=-22 668[ 1.688242] c2 1 sdhci_msm 74a4900.sdhci: vreg reset failed (-22) 669[ 1.688249] c2 1 sdhci_msm 74a4900.sdhci: Regulator setup failed (-22) 670[ 1.689350] c2 1 sdhci_msm: probe of 74a4900.sdhci failed with error -22 671[ 1.695165] c2 1 hidraw: raw HID events driver (C) Jiri Kosina 672[ 1.695414] c2 1 usbcore: registered new interface driver usbhid 673[ 1.695420] c2 1 usbhid: USB HID core driver 674[ 1.695846] c2 1 ashmem: initialized 675[ 1.873448] c1 268 [TP]:fwu_start_reflash: Start of reflash process 676[ 2.323392] c0 258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 1 677[ 2.398951] c2 1 nanohub: loaded; ret=0 678[ 2.399081] c2 1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm 679[ 2.411252] c2 1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. 680[ 2.413023] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered. 681[ 2.413063] c2 1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered. 682[ 2.415740] c2 1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered. 683[ 2.419757] c2 1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information. 684[ 2.419874] c2 1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. 685[ 2.419982] c2 1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information. 686[ 2.420120] c2 1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information. 687[ 2.424327] c2 1 Trustonic TEE: MobiCore mcDrvModuleApi version is 2.1 688[ 2.424337] c2 1 Trustonic TEE: MobiCore t-base-QC-MSM8996-Android-302B-V001-20150529_084320_16 689[ 2.426005] c2 1 [NC] == NC_probe == 690[ 2.426017] c2 1 [NC] Init GPIO pins 691[ 2.426245] c2 1 usbcore: registered new interface driver snd-usb-audio 692[ 2.427612] c2 1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a 693[ 2.427656] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe 694[ 2.428067] c2 1 tfa98xx_i2c_probe(): TFA9891 detected 695[ 2.428082] c2 1 tfa98xx 7-0034: Skipping IRQ registration 696[ 2.428174] c2 1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully! 697[ 2.428958] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 698[ 2.429044] c2 1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins 699[ 2.439509] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120 700[ 2.439752] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020 701[ 2.439761] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 702[ 2.439909] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022 703[ 2.439918] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 704[ 2.440216] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024 705[ 2.440234] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 706[ 2.440456] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026 707[ 2.440465] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 708[ 2.440485] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121 709[ 2.440621] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021 710[ 2.440630] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 711[ 2.440767] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023 712[ 2.440775] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 713[ 2.440910] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025 714[ 2.440919] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 715[ 2.441053] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027 716[ 2.441061] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 717[ 2.441083] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130 718[ 2.441216] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030 719[ 2.441224] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 720[ 2.441362] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032 721[ 2.441370] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 722[ 2.441502] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034 723[ 2.441511] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 724[ 2.441651] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036 725[ 2.441659] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 726[ 2.441678] c2 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131 727[ 2.441807] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031 728[ 2.441815] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 729[ 2.441949] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033 730[ 2.441958] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 731[ 2.442090] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035 732[ 2.442098] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 733[ 2.442233] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037 734[ 2.442241] c2 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported 735[ 2.444615] c2 1 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp 736[ 2.453348] c2 1 [AUD] snd_soc_msm8996: uart_gpios_init done 737[ 2.453404] c2 1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 738[ 2.453414] c2 1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 739[ 2.453460] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 740[ 2.453483] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 741[ 2.453505] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 742[ 2.453526] c2 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 743[ 2.453548] c2 1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 744[ 2.455217] c2 1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 745[ 2.457250] c3 1 GACT probability NOT on 746[ 2.457266] c3 1 Mirror/redirect action on 747[ 2.457284] c3 1 u32 classifier 748[ 2.457288] c3 1 Actions configured 749[ 2.457311] c3 1 Netfilter messages via NETLINK v0.30. 750[ 2.457340] c3 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 751[ 2.457509] c3 1 ctnetlink v0.93: registering with nfnetlink. 752[ 2.457819] c3 1 xt_time: kernel timezone is -0000 753[ 2.457954] c3 1 ip_tables: (C) 2000-2006 Netfilter Core Team 754[ 2.458021] c3 1 arp_tables: (C) 2002 David S. Miller 755[ 2.458046] c3 1 TCP: cubic registered 756[ 2.458053] c3 1 Initializing XFRM netlink socket 757[ 2.458223] c3 1 NET: Registered protocol family 10 758[ 2.458728] c3 1 mip6: Mobile IPv6 759[ 2.458745] c3 1 ip6_tables: (C) 2000-2006 Netfilter Core Team 760[ 2.458816] c3 1 sit: IPv6 over IPv4 tunneling driver 761[ 2.459038] c3 1 NET: Registered protocol family 17 762[ 2.459055] c3 1 NET: Registered protocol family 15 763[ 2.459081] c3 1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 764[ 2.459096] c3 1 Bridge firewalling registered 765[ 2.459102] c3 1 Ebtables v2.0 registered 766[ 2.459245] c3 1 Bluetooth: ffffffc0f983fcb8 767[ 2.459253] c3 1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fce8 768[ 2.459281] c3 1 Bluetooth: ffffffc0f983fcc8Bluetooth: ffffffc0f983fcc8 769[ 2.459291] c3 1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fd18 770[ 2.459302] c3 1 Bluetooth: ffffffc0f983fcf8<6>[ 2.459332] c3 1 l2tp_core: L2TP core driver, V2.0 771[ 2.459344] c3 1 l2tp_ppp: PPPoL2TP kernel driver, V2.0 772[ 2.459350] c3 1 l2tp_ip: L2TP IP encapsulation support (L2TPv3) 773[ 2.459365] c3 1 l2tp_netlink: L2TP netlink interface 774[ 2.459383] c3 1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) 775[ 2.459396] c3 1 l2tp_debugfs: L2TP debugfs support 776[ 2.459403] c3 1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 777[ 2.460302] c3 1 NET: Registered protocol family 27 778[ 2.462367] c1 58 usb_otg_vreg: no parameters 779[ 2.462423] c1 58 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin 780[ 2.462485] c1 58 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517 781[ 2.464984] c1 58 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped. 782[ 2.465971] c1 58 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped. 783[ 2.467140] c1 58 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id. 784[ 2.467712] c1 58 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped. 785[ 2.470460] c1 58 sps:BAM 0x0000000006b04000 is registered. 786[ 2.472054] c1 58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent! 787[ 2.472082] c1 58 SMBCHG: smbchg_check_chg_version: PMI8996 version = v1.1 788[ 2.472224] c1 58 smbcharger_charger_otg: no parameters 789[ 2.472354] c1 58 smbcharger_external_otg: no parameters 790[ 2.472390] c1 58 smbcharger_external_otg: supplied by pmi8994_boost_5v 791[ 2.472799] c1 58 SMBCHG: battchg_suspend: 1 voting for 0 - on 792[ 2.472825] c1 58 SMBCHG: usb_suspend: 7 voting for 0 - off 793[ 2.473227] c1 58 SMBCHG: usb_suspend: 0 voting for 0 - off 794[ 2.473233] c1 58 SMBCHG: dc_suspend: 0 voting for 0 - off 795[ 2.473295] c1 58 SMBCHG: dcl_icl: 0 voting for 1500 - on 796[ 2.473336] c1 58 SMBCHG: fcc: 1 voting for 2600 - on 797[ 2.473546] c1 58 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on 798[ 2.473553] c1 58 SMBCHG: hwaicl_disable: 0 voting for 0 - off 799[ 2.474009] c1 160 SMBCHG: smbchg_clean_tcc_WA_work: called before init 800[ 2.496887] c1 58 SMBCHG: hwaicl_disable: 1 voting for 0 - off 801[ 2.496895] c1 58 SMBCHG: usb_suspend: 6 voting for 0 - off 802[ 2.496959] c1 58 SMBCHG: usb_icl: 0 voting for 100 - on 803[ 2.496965] c1 58 SMBCHG: usb_suspend: 2 voting for 0 - off 804[ 2.497219] c1 58 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1 805[ 2.499512] c1 58 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4 806[ 2.499770] c1 58 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4 807[ 2.520696] c1 327 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13 808[ 2.526534] c1 58 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent! 809[ 2.526554] c1 58 smbchg_debug_mask=0x6 810[ 2.526573] c1 327 SMBCHG: battchg_suspend: 1 voting for 0 - on 811[ 2.526614] c1 327 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping 812[ 2.526621] c1 327 SMBCHG: usb_icl: 0 voting for 0 - on 813[ 2.526627] c1 327 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0 814[ 2.526633] c1 327 SMBCHG: usb_suspend: 2 voting for 0 - on 815[ 2.526659] c1 327 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA 816[ 2.526675] c1 327 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 817[ 2.526681] c1 327 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 818[ 2.526708] c0 365 SMBCHG: power_ok_handler: triggered: 0x00. prev_power_ok(-1) power_ok(0) 819[ 2.526758] c1 327 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 820[ 2.526975] c1 58 SMBCHG: rerun_hvdcp_det_if_necessary: HVDCP not support, return directly 821[ 2.529812] c1 58 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1 822[ 2.529819] c1 58 [BATT] Probe process: (0, 2) 823[ 2.529872] c1 58 SMBCHG: handle_usb_insertion: triggered 824[ 2.529897] c1 58 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP) 825[ 2.529902] c1 58 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100 826[ 2.529908] c1 58 SMBCHG: usb_icl: 0 voting for 100 - on 827[ 2.529914] c1 58 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100 828[ 2.529919] c1 58 SMBCHG: usb_suspend: 2 voting for 0 - off 829[ 2.530000] c0 365 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(0) power_ok(1) 830[ 2.530031] c1 58 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA 831[ 2.530047] c1 58 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1) 832[ 2.530129] c1 344 SMBCHG: battchg_suspend: 1 voting for 0 - on 833[ 2.530137] c1 344 SMBCHG: usb_icl: 0 voting for 0 - on 834[ 2.530142] c1 344 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0 835[ 2.530147] c1 344 SMBCHG: usb_suspend: 2 voting for 0 - on 836[ 2.530171] c1 344 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA 837[ 2.530187] c1 344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 838[ 2.530214] c0 365 SMBCHG: power_ok_handler: triggered: 0x00. 839[ 2.530473] c1 344 SMBCHG: battchg_suspend: 1 voting for 0 - on 840[ 2.530481] c1 344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 841[ 2.530725] c1 344 SMBCHG: battchg_suspend: 1 voting for 0 - on 842[ 2.530733] c1 344 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 843[ 2.530970] c1 58 SMBCHG: pmi8994_boot_update_usb_status: Update usb type! 844[ 2.530982] c1 58 SMBCHG: smbchg_rerun_aicl: Rerunning AICL... 845[ 2.584547] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 846[ 2.584560] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 847[ 2.584571] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 848[ 2.584678] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 849[ 2.584711] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 850[ 2.584740] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 851[ 2.584769] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 852[ 2.584799] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 853[ 2.586936] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 854[ 2.587328] c1 58 usb_otg_vreg: no parameters 855[ 2.587367] c1 58 usb_otg_vreg: supplied by smbcharger_external_otg 856[ 2.588681] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 857[ 2.588694] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 858[ 2.588706] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 859[ 2.588809] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 860[ 2.588840] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 861[ 2.588869] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 862[ 2.588896] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 863[ 2.588923] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 864[ 2.591290] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 865[ 2.592091] c3 1 Loading compiled-in X.509 certificates 866[ 2.592370] c3 1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d' 867[ 2.592591] c3 1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610' 868[ 2.592817] c3 1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f' 869[ 2.593039] c3 1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866' 870[ 2.593664] c3 1 Key type encrypted registered 871[ 2.629003] c3 1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped. 872[ 2.629071] c3 1 adsprpc: channel link type: 0 873[ 2.637842] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 874[ 2.637855] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 875[ 2.637867] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 876[ 2.637965] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 877[ 2.637994] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 878[ 2.638023] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 879[ 2.638051] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 880[ 2.638079] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 881[ 2.640174] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 882[ 2.641514] c3 1 RNDIS_IPA module is loaded. 883[ 2.642020] c3 1 file system registered 884[ 2.642053] c3 1 mbim_init: initialize 1 instances 885[ 2.642089] c3 1 mbim_init: Initialized 1 ports 886[ 2.642368] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 887[ 2.642378] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 888[ 2.642390] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 889[ 2.642502] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 890[ 2.642531] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 891[ 2.642560] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 892[ 2.642588] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 893[ 2.642616] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 894[ 2.642818] c3 1 rndis_qc_init: initialize rndis QC instance 895[ 2.642934] c3 1 Number of LUNs=8 896[ 2.642942] c3 1 Mass Storage Function, version: 2009/09/11 897[ 2.642947] c3 1 LUN: removable file: (no medium) 898[ 2.642959] c3 1 Number of LUNs=1 899[ 2.642984] c3 1 LUN: removable file: (no medium) 900[ 2.642988] c3 1 Number of LUNs=1 901[ 2.643120] c3 1 android_usb gadget: android_usb ready 902[ 2.644914] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 903[ 2.646297] c3 1 [KEY] keycode = 115, gpio = 126, irq = 481 904[ 2.646335] c3 1 [KEY] keycode = 116, gpio = 40, irq = 395[KEY] keycode = 114, gpio = 121, irq = 476 905[ 2.646465] c3 1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6 906[ 2.646598] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 907[ 2.646609] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 908[ 2.646619] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 909[ 2.646833] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 910[ 2.646894] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 911[ 2.646924] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 912[ 2.646953] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 913[ 2.646983] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 914[ 2.647133] c3 1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1970-03-12 23:51:25 UTC (6133885) 915[ 2.649393] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 916[ 2.651189] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 917[ 2.651203] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 918[ 2.651215] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 919[ 2.651322] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 920[ 2.651353] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 921[ 2.651383] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 922[ 2.651414] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 923[ 2.651444] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 924[ 2.653780] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 925[ 2.655240] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1] 926[ 2.655503] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00] 927[ 2.655661] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01] 928[ 2.655783] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 929[ 2.655794] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 930[ 2.655803] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10] 931[ 2.655806] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 932[ 2.655929] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 933[ 2.655948] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11] 934[ 2.655976] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 935[ 2.656011] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 936[ 2.656038] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 937[ 2.656070] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 938[ 2.656090] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0] 939[ 2.656227] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-] 940[ 2.656361] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-] 941[ 2.658386] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 942[ 2.659123] c3 1 parse_cpu_levels: idx 1 545 943[ 2.659133] c3 1 parse_cpu_levels: idx 2 6022 944[ 2.659137] c3 1 parse_cpu_levels: idx 2 11499 945[ 2.659216] c3 1 parse_cpu_levels: idx 1 545 946[ 2.659221] c3 1 parse_cpu_levels: idx 2 6022 947[ 2.659224] c3 1 parse_cpu_levels: idx 2 11499 948[ 2.659951] c1 58 [AUD] snd_soc_msm8996: uart_gpios_init done 949[ 2.659963] c1 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 950[ 2.659975] c1 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 951[ 2.660156] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 952[ 2.660210] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 953[ 2.660240] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 954[ 2.660270] c1 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 955[ 2.660300] c1 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 956[ 2.662593] c1 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 957[ 2.662943] c3 1 [FLT] qpnp_flash_led_probe: ++ 958[ 2.663093] c3 1 [FLT] flash_strobe = 22 959[ 2.663105] c3 1 qcom,qpnp-flash-led qpnp-flash-led-25: Unable to acquire pinctrl 960[ 2.664063] c3 1 [FLT] qpnp_flash_led_probe: -- 961[ 2.664073] c2 58 [AUD] snd_soc_msm8996: uart_gpios_init done 962[ 2.664080] c2 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 963[ 2.664089] c2 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 964[ 2.664140] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 965[ 2.664162] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 966[ 2.664184] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 967[ 2.664206] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 968[ 2.664228] c2 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 969[ 2.665891] c3 1 rmnet_ipa started initialization 970[ 2.665901] c3 1 IPA SSR support = True 971[ 2.665905] c3 1 IPA ipa-loaduC = True 972[ 2.665909] c3 1 IPA SG support = True 973[ 2.665951] c2 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 974[ 2.667425] c2 58 [AUD] snd_soc_msm8996: uart_gpios_init done 975[ 2.667436] c2 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 976[ 2.667445] c2 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 977[ 2.667500] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 978[ 2.667523] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 979[ 2.667545] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 980[ 2.667567] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 981[ 2.667588] c2 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 982[ 2.667594] c3 1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 983[ 2.667600] c3 1 ipa ipa2_uc_state_check:301 uC is not loaded 984[ 2.668363] c3 1 rmnet_ipa completed initialization 985[ 2.669302] c2 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 986[ 2.670526] c2 58 [AUD] snd_soc_msm8996: uart_gpios_init done 987[ 2.670538] c2 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 988[ 2.670547] c2 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 989[ 2.670597] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 990[ 2.670620] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 991[ 2.670642] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 992[ 2.670663] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 993[ 2.670684] c2 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 994[ 2.672059] c3 1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux. 995[ 2.672362] c2 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 996[ 2.672972] c3 1 usb_otg_vreg: disabling 997[ 2.673021] c3 1 rome_vreg: disabling 998[ 2.673026] c3 1 gdsc_mmagic_bimc: disabling 999[ 2.673061] c3 1 kryo1-retention: disabling 1000[ 2.673065] c3 1 kryo0-retention: disabling 1001[ 2.673070] c3 1 gfx_mem_acc_corner: disabling 1002[ 2.673074] c3 1 apcc_l3_mem_acc_corner: disabling 1003[ 2.673078] c3 1 apc1_perfcl_mem_acc_corner: disabling 1004[ 2.673082] c3 1 apc0_pwrcl_mem_acc_corner: disabling 1005[ 2.673090] c3 1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests 1006[ 2.673417] c3 1 clock_late_init: Removing enables held for handed-off clocks 1007[ 2.673589] c2 58 [AUD] snd_soc_msm8996: uart_gpios_init done 1008[ 2.673596] c2 58 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1009[ 2.673606] c2 58 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1010[ 2.673657] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1011[ 2.673680] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1012[ 2.673701] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1013[ 2.673723] c2 58 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1014[ 2.673744] c2 58 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1015[ 2.675417] c2 58 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 1016[ 2.677435] c3 1 ALSA device list: 1017[ 2.677441] c3 1 No soundcards found. 1018[ 2.677496] c3 1 Warning: unable to open an initial console. 1019[ 2.677513] c3 1 dm: attempting early device configuration. 1020[ 2.677982] c3 1 device-mapper: init: adding target '0 1 android-verity 259:18 ' 1021[ 2.677995] c3 1 device-mapper: android-verity: key:id:7580d366b6e2804279fd88e290c82a5a7d5dd610 dev:259:18 1022[ 2.679920] c3 1 device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:236 1023[ 2.679928] c3 1 device-mapper: android-verity: verity_table: 1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 516099 516099 sha256 13692fb4e152c86421c3dd07aa8e40670c68740acde9e8591228190d832cc5d2 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 1024[ 2.680204] c3 1 device-mapper: android-verity: Signature verification success 1025[ 2.680213] c3 1 device-mapper: android-verity: Data sectors 4128792 1026[ 2.680648] c2 1 device-mapper: android-verity: android-verity mounted as verity target 1027[ 2.680778] c2 1 device-mapper: table: 253:0: adding target device sda34 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 1028[ 2.680787] c2 1 device-mapper: table: 253:0: adding target device sda34 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 1029[ 2.680831] c2 1 dm: dm-0 is ready 1030[ 2.682098] c3 1 EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities 1031[ 2.682369] c3 1 EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities 1032[ 2.685559] c3 1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 1033[ 2.685585] c3 1 VFS: Mounted root (ext4 filesystem) readonly on device 253:0. 1034[ 2.685672] c3 1 Freeing unused kernel memory: 496K (ffffffc00149e000 - ffffffc00151a000) 1035[ 2.685691] c3 1 Freeing alternatives memory: 76K (ffffffc00151a000 - ffffffc00152d000) 1036[ 2.695340] c3 1 init: init first stage started! 1037[ 2.698673] c3 1 SELinux: 2048 avtab hash slots, 7846 rules. 1038[ 2.699831] c3 1 SELinux: 2048 avtab hash slots, 7846 rules. 1039[ 2.699840] c3 1 SELinux: 1 users, 2 roles, 799 types, 0 bools, 1 sens, 1024 cats 1040[ 2.699845] c3 1 SELinux: 63 classes, 7846 rules 1041[ 2.700493] c3 1 SELinux: Class can_socket not defined in policy. 1042[ 2.700507] c3 1 SELinux: the above unknown classes and permissions will be denied 1043[ 2.700523] c3 1 SELinux: Completing initialization. 1044[ 2.700526] c3 1 SELinux: Setting up existing superblocks. 1045[ 2.700538] c3 1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts 1046[ 2.700550] c3 1 SELinux: initialized (dev bdev, type bdev), not configured for labeling 1047[ 2.700558] c3 1 SELinux: initialized (dev proc, type proc), uses genfs_contexts 1048[ 2.700573] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1049[ 2.700585] c3 1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts 1050[ 2.728279] c3 1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs 1051[ 2.728292] c3 1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs 1052[ 2.728299] c3 1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling 1053[ 2.728305] c3 1 SELinux: initialized (dev aio, type aio), not configured for labeling 1054[ 2.728312] c3 1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs 1055[ 2.728325] c3 1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts 1056[ 2.728334] c3 1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts 1057[ 2.728400] c3 1 SELinux: initialized (dev dm-0, type ext4), uses xattr 1058[ 2.728452] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1059[ 2.728466] c3 1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts 1060[ 2.731186] c2 1 audit: type=1403 audit(6133885.580:2): policy loaded auid=4294967295 ses=4294967295 1061[ 2.731428] c2 1 audit: type=1404 audit(6133885.580:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 1062[ 2.731763] c2 1 init: (Initializing SELinux enforcing took 0.04s.) 1063[ 2.734537] c2 1 init: init second stage started! 1064[ 2.738011] c2 1 init: Running restorecon... 1065[ 2.916909] c2 1 init: waitpid failed: No child processes 1066[ 2.918430] c2 1 init: (Loading properties from /default.prop took 0.00s.) 1067[ 2.920374] c2 1 init: (Parsing /init.environ.rc took 0.00s.) 1068[ 2.921722] c2 1 init: (Parsing /init.usb.rc took 0.00s.) 1069[ 2.922926] c2 1 init: ignored duplicate definition of service 'hci_filter_root'init: (Parsing init.sailfish.nanohub.rc took 0.00s.) 1070[ 2.923821] c2 1 init: (Parsing init.sailfish.usb.rc took 0.00s.) 1071[ 2.924071] c2 1 init: (Parsing init.common.diag.rc took 0.00s.) 1072[ 2.924083] c2 1 init: (Parsing /init.sailfish.rc took 0.00s.) 1073[ 2.924633] c2 1 init: (Parsing /init.usb.configfs.rc took 0.00s.) 1074[ 2.924919] c2 1 init: (Parsing /init.zygote64_32.rc took 0.00s.) 1075[ 2.924931] c2 1 init: (Parsing /init.rc took 0.01s.) 1076[ 2.925532] c2 1 init: Starting service 'ueventd'... 1077[ 2.925932] c2 1 init: Waiting for /dev/.coldboot_done... 1078[ 2.927343] c0 417 ueventd: ueventd started! 1079[ 3.033394] c1 327 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700 1080[ 3.033432] c1 327 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping 1081[ 3.033439] c1 327 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1) 1082[ 3.226555] c1 18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id1-batterydata, id_ohm=22866, raw_min=27501, raw_max=40000. 1083[ 3.226571] c1 18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id2-batterydata, id_ohm=22866, raw_min=0, raw_max=16000. 1084[ 3.226579] c1 18 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id3-batterydata, id_ohm=22866, raw_min=16001, raw_max=27500. 1085[ 3.226593] c1 18 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 277 1086[ 3.226599] c1 18 FG: fg_batt_profile_init: batt_fcc_ma = 2800 1087[ 3.226605] c1 18 FG: fg_batt_profile_init: batt_capacity_mah = 2770 1088[ 3.226611] c1 18 FG: fg_batt_profile_init: fcc_half_capacity_ma = 0 1089[ 3.230586] c1 18 SMBCHG: battchg_suspend: 0 voting for 0 - on 1090[ 3.326704] c0 258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 2 1091[ 3.326717] c0 258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0 1092[ 3.357013] c3 417 ueventd: Coldboot took 0.42s. 1093[ 3.359622] c1 1 init: Waiting for /dev/.coldboot_done took 0.43s. 1094[ 3.360754] c1 1 keychord: using input dev qpnp_pon for fevent 1095[ 3.360767] c1 1 keychord: using input dev HDMI CEC User or Deck Control for fevent 1096[ 3.360774] c1 1 keychord: using input dev qbt1000_key_input for fevent 1097[ 3.360802] c1 1 keychord: using input dev gpio-keys for fevent 1098[ 3.361479] c1 1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1099[ 3.361971] c1 1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1100[ 3.362795] c1 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1101[ 3.365296] c1 1 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory 1102[ 3.366184] c1 1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1103[ 3.366588] c1 1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1104[ 3.370270] c1 1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts 1105[ 3.370514] c1 1 Registered swp emulation handler 1106[ 3.455585] c1 258 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x3), pd_state(0x0), retry: 0 1107[ 3.455600] c1 258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0 1108[ 3.457214] c1 258 FUSB platform_notify_cc_orientation: orientation=[1], CC1=[4], CC2=[0] 1109[ 3.535341] c0 420 fs_mgr: Enabling dm-verity for vendor (mode 2) 1110[ 3.535400] c0 420 fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/vendor_b /dev/block/bootdevice/by-name/vendor_b 4096 4096 75590 75590 sha256 70317eaeca3474e115020012adb99241ce6e7c12baeef3967bda8a0f9157db5f aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/bootdevice/by-name/vendor_b fec_start 76195 fec_blocks 76195 fec_roots 2 ignore_zero_blocks' 1111[ 3.536739] c1 327 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700 1112[ 3.536776] c1 327 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping 1113[ 3.539646] c1 420 device-mapper: table: 253:1: adding target device sda32 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 1114[ 3.539659] c1 420 device-mapper: table: 253:1: adding target device sda32 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 1115[ 3.544192] c3 420 EXT4-fs (dm-1): mounting with "discard" option, but the device does not support discard 1116[ 3.544205] c3 420 EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,discard 1117[ 3.544221] c3 420 SELinux: initialized (dev dm-1, type ext4), uses xattr 1118[ 3.544272] c3 420 fs_mgr: __mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0 1119[ 3.545405] c3 420 SELinux: initialized (dev sda26, type vfat), uses mountpoint labeling 1120[ 3.545426] c3 420 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem_b,target=/firmware/radio,type=vfat)=0 1121[ 3.548572] c1 1 init: (Parsing /system/etc/init/atrace.rc took 0.00s.) 1122[ 3.549149] c1 1 init: (Parsing /system/etc/init/audioserver.rc took 0.00s.) 1123[ 3.549542] c1 1 init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) 1124[ 3.549965] c1 1 init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) 1125[ 3.550661] c1 1 init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.) 1126[ 3.551151] c1 1 init: (Parsing /system/etc/init/cppreopts.rc took 0.00s.) 1127[ 3.551560] c1 1 init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) 1128[ 3.552070] c1 1 init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.) 1129[ 3.552564] c1 1 init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) 1130[ 3.553022] c1 1 init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) 1131[ 3.553459] c1 1 init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) 1132[ 3.553900] c1 1 init: (Parsing /system/etc/init/installd.rc took 0.00s.) 1133[ 3.554424] c1 1 init: (Parsing /system/etc/init/keystore.rc took 0.00s.) 1134[ 3.554825] c1 1 init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) 1135[ 3.555213] c1 1 init: (Parsing /system/etc/init/logd.rc took 0.00s.) 1136[ 3.555679] c1 1 init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) 1137[ 3.556213] c1 1 init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.) 1138[ 3.556624] c1 1 init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.) 1139[ 3.557049] c1 1 init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.) 1140[ 3.557528] c1 1 init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) 1141[ 3.558008] c1 1 init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) 1142[ 3.558407] c1 1 init: (Parsing /system/etc/init/netd.rc took 0.00s.) 1143[ 3.558815] c1 1 init: (Parsing /system/etc/init/otapreopt.rc took 0.00s.) 1144[ 3.559338] c1 1 init: (Parsing /system/etc/init/racoon.rc took 0.00s.) 1145[ 3.559788] c1 1 init: (Parsing /system/etc/init/recovery-persist.rc took 0.00s.) 1146[ 3.560227] c1 1 init: (Parsing /system/etc/init/recovery-refresh.rc took 0.00s.) 1147[ 3.560694] c1 1 init: (Parsing /system/etc/init/rild.rc took 0.00s.) 1148[ 3.561187] c1 1 init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) 1149[ 3.561662] c1 1 init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) 1150[ 3.562080] c1 1 init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) 1151[ 3.562467] c1 1 init: (Parsing /system/etc/init/update_engine.rc took 0.00s.) 1152[ 3.562926] c1 1 init: (Parsing /system/etc/init/vdc.rc took 0.00s.) 1153[ 3.563495] c1 1 init: (Parsing /system/etc/init/vold.rc took 0.00s.) 1154[ 3.565581] c1 1 zram0: detected capacity change from 0 to 536870912 1155[ 3.576091] c0 432 random: mkswap urandom read with 115 bits of entropy available 1156[ 3.619534] c1 268 [TP]:fwu_go_nogo: Device firmware ID = 2433782 1157[ 3.619548] c1 268 [TP]:fwu_go_nogo: Image firmware ID = 2433782 1158[ 3.619554] c1 268 [TP]:fwu_go_nogo: Image firmware ID is the same as device firmware ID 1159[ 3.619559] c1 268 [TP]:fwu_go_nogo: No need to do reflash 1160[ 3.619574] c1 268 [TP]:synaptics_rmi4_reset_device from synaptics_fw_updater+0xd00/0x10a0, rebuild = 0 1161[ 3.620236] c0 52 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0 1162[ 3.620247] c0 52 ->handle_irq(): ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148 1163[ 3.620259] c0 52 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8 1164[ 3.620270] c0 52 ->action(): (null) 1165[ 3.620276] c0 52 IRQ_NOPROBE set 1166[ 3.620281] c0 52 IRQ_NOREQUEST set 1167[ 3.620286] c0 52 IRQ_NOTHREAD set 1168[ 3.622356] c1 1 Adding 524284k swap on /dev/block/zram0. Priority:-1 extents:1 across:524284k SS 1169[ 3.624284] c2 1 EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: barrier=1 1170[ 3.624304] c2 1 SELinux: initialized (dev sdd3, type ext4), uses xattr 1171[ 3.625625] c2 1 init: Starting service 'logd'... 1172[ 3.626059] c2 1 EXT4-fs (dm-0): re-mounted. Opts: (null) 1173[ 3.642358] c0 435 logd.auditd: start 1174[ 3.642396] c0 435 logd.klogd: 3642371142 1175[ 3.648217] c2 268 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28 1176[ 3.648849] c2 268 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919) 1177[ 3.649090] c2 268 [TP]:synaptics_rmi4_f12_init report data init done 1178[ 3.656814] c2 268 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782 1179[ 3.657749] c2 268 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000 1180[ 3.663540] c2 268 [TP]:fwu_start_reflash: End of reflash process 1181[ 3.663549] c2 268 [TP]:synaptics_config_updater 1182[ 3.664495] c2 268 [TP]:synaptics_config_updater: Device config ID = 5331763200190000000000000000000000000000000000000000000000000000 1183[ 3.664500] c2 268 [TP]:synaptics_config_updater: Start of write config process 1184[ 3.718093] c2 268 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x1 1185[ 3.718111] c2 268 [TP]:synaptics_config_updater: Image config ID = 5331763200190000000000000000000000000000000000000000000000000000 1186[ 3.718116] c2 268 [TP]:synaptics_config_updater: config_size = 2048 1187[ 3.718123] c2 268 [TP]: synaptics_config_updater: crc_cksum = A293CDAD 1188[ 3.719743] c2 268 [TP]: crc_comparison_v7: config_crc = A293CDAD, flash_crc = A293CDAD 1189[ 3.719749] c2 268 [TP]: synaptics_config_updater: No need to update 1190[ 3.719760] c2 268 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x748/0xa50, rebuild = 0 1191[ 3.720425] c0 0 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0 1192[ 3.720436] c0 0 ->handle_irq(): ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148 1193[ 3.720448] c0 0 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8 1194[ 3.720459] c0 0 ->action(): (null) 1195[ 3.720464] c0 0 IRQ_NOPROBE set 1196[ 3.720468] c0 0 IRQ_NOREQUEST set 1197[ 3.720473] c0 0 IRQ_NOTHREAD set 1198[ 3.748004] c2 268 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919 Rx: 16 Tx: 28 1199[ 3.748640] c2 268 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1079,1919) 1200[ 3.748883] c2 268 [TP]:synaptics_rmi4_f12_init report data init done 1201[ 3.756560] c2 268 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782 1202[ 3.757489] c2 268 [TP]:synaptics_rmi4_query_device: config_version: 5331763200190000000000000000000000000000000000000000000000000000 1203[ 3.760612] c0 0 random: nonblocking pool is initialized 1204[ 3.763228] c2 268 [TP]:synaptics_config_updater: End of write config process 1205[ 3.763235] c2 268 [TP]: synaptics_config_updater end 1206[ 3.834252] c3 1 init: Starting service 'qseecomd'... 1207[ 3.834749] c3 1 init: Starting service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)'... 1208[ 3.895496] c0 443 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use) 1209[ 3.911178] c0 442 type=1400 audit(6133886.760:4): avc: denied { search } for pid=446 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1210[ 3.955549] c3 1 init: Service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)' (pid 444) exited with status 0 1211[ 3.955904] c3 1 init: Starting service 'flash-nanohub-fw'... 1212[ 3.956533] c3 1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts 1213[ 3.957629] c3 1 init: Starting service 'exec 2 (/system/bin/recovery-refresh)'... 1214[ 3.964735] c3 1 init: Service 'exec 2 (/system/bin/recovery-refresh)' (pid 459) exited with status 254 1215[ 3.965777] c3 1 init: (Loading properties from /system/build.prop took 0.00s.) 1216[ 3.966111] c3 1 init: (Loading properties from /vendor/build.prop took 0.00s.) 1217[ 3.966139] c3 1 init: (Loading properties from /factory/factory.prop took 0.00s.) 1218[ 3.966276] c3 1 init: /recovery not specified in fstab 1219[ 3.968455] c3 1 subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000 1220[ 3.973869] c1 258 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b) 1221[ 4.000468] c2 359 SMBCHG: src_detect_handler: chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0 1222[ 4.000483] c2 359 SMBCHG: handle_usb_removal: triggered 1223[ 4.000490] c2 359 SMBCHG: smbchg_change_usb_supply_type: Type 0: setting mA = 1100 1224[ 4.000495] c2 359 SMBCHG: usb_icl: 0 voting for 1100 - on 1225[ 4.000501] c2 359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1100 1226[ 4.000506] c2 359 SMBCHG: usb_suspend: 2 voting for 0 - off 1227[ 4.000534] c2 359 SMBCHG: smbchg_set_usb_current_max: override_usb_current=0 current_ma set to 500 1228[ 4.000651] c2 359 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA 1229[ 4.000674] c2 359 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1) 1230[ 4.000687] c2 359 SMBCHG: usb_icl: 0 voting for 1100 - off 1231[ 4.000792] c2 359 dwc3_msm_power_set_property_usb: delay 500ms to confirm disconnect or pr_swap 1232[ 4.000819] c2 359 SMB1351 smb1351_parallel_set_chg_present: set slave present = 1 -> 0 1233[ 4.000825] c2 359 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 1 suspended_status = 4 -> 20 1234[ 4.001021] c2 263 SMBCHG: battchg_suspend: 1 voting for 0 - on 1235[ 4.001031] c2 263 SMBCHG: usb_icl: 0 voting for 0 - on 1236[ 4.001035] c2 263 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0 1237[ 4.001039] c2 263 SMBCHG: usb_suspend: 2 voting for 0 - on 1238[ 4.001116] c2 263 SMBCHG: smbchg_set_usb_current_max: usb type = 0 current set to 0 mA 1239[ 4.001135] c2 263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1240[ 4.001225] c2 359 SMBCHG: usb_icl: 4 voting for 0 - off 1241[ 4.001230] c2 359 SMBCHG: usb_icl: 5 voting for 0 - off 1242[ 4.001237] c2 359 SMBCHG: hwaicl_short_deglitch: 1 voting for 0 - off 1243[ 4.001580] c2 263 SMBCHG: battchg_suspend: 1 voting for 0 - on 1244[ 4.001588] c2 263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1245[ 4.016244] c0 357 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 479880 1246[ 4.040210] c0 442 type=1400 audit(6133886.890:5): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1247[ 4.040709] c0 442 type=1400 audit(6133886.890:6): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1248[ 4.040781] c0 442 type=1400 audit(6133886.890:7): avc: denied { search } for pid=458 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1249[ 4.269553] c3 1 subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset 1250[ 4.281974] c1 52 [AUD] snd_soc_msm8996: uart_gpios_init done 1251[ 4.281987] c1 52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1252[ 4.281999] c1 52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1253[ 4.282111] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1254[ 4.282140] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1255[ 4.282168] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1256[ 4.282195] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1257[ 4.282224] c1 52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1258[ 4.284893] c1 52 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 1259[ 4.288379] c1 52 [AUD] snd_soc_msm8996: uart_gpios_init done 1260[ 4.288394] c1 52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1261[ 4.288405] c1 52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1262[ 4.288572] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1263[ 4.288644] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1264[ 4.288683] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1265[ 4.288721] c1 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1266[ 4.288868] c1 52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1267[ 4.291050] c0 0 subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up 1268[ 4.291120] c3 1 sysmon_send_event_no_qmi: Message sending failed -19 1269[ 4.291146] c0 332 subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received 1270[ 4.291208] c3 1 sysmon_send_event_no_qmi: Message sending failed -19 1271[ 4.291253] c1 332 L-Notify: Generel: 7 1272[ 4.292029] c1 52 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 1273[ 4.297033] c3 1 subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000 1274[ 4.302428] c0 469 apr_tal:Q6 Is Up 1275[ 4.304692] c2 52 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: schedule_delayed_work with card_det_work 1276[ 4.304767] c2 52 [AUD] snd_soc_msm8996: uart_gpios_init done 1277[ 4.304774] c2 52 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1278[ 4.304783] c2 52 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1279[ 4.304827] c2 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1280[ 4.304850] c2 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1281[ 4.304871] c2 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1282[ 4.304893] c2 52 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1283[ 4.304914] c2 52 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1284[ 4.306870] c2 52 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered 1285[ 4.391582] c1 58 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service 1286[ 4.392373] c1 270 diag: In socket_open_client, socket not initialized for LPASS_CMD 1287[ 4.392393] c1 270 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000 1288[ 4.393194] c0 442 type=1400 audit(6133887.240:8): avc: denied { create } for pid=270 comm="kworker/u8:5" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0 1289[ 4.399233] c1 327 sps:BAM 0x0000000009184000 (va:0xffffff8004400000) enabled: ver:0x19, number of pipes:31 1290[ 4.399252] c1 327 sps:BAM 0x0000000009184000 is registered. 1291[ 4.400458] c0 384 wcd9335-slim tasha-slim-pgd: Platform data from device tree 1292[ 4.400553] c0 384 wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0 1293[ 4.400573] c0 384 wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0 1294[ 4.400593] c0 384 wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0 1295[ 4.400612] c0 384 wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0 1296[ 4.400631] c0 384 wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0 1297[ 4.400640] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed 1298[ 4.400647] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed 1299[ 4.400656] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed 1300[ 4.400664] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed 1301[ 4.400674] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 1302[ 4.400681] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 1303[ 4.400688] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 1304[ 4.400695] c0 384 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 1305[ 4.400825] c0 384 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2 1306[ 4.401376] c1 269 [AUD] snd_soc_msm8996: uart_gpios_init done 1307[ 4.401392] c1 269 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1308[ 4.401403] c1 269 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1309[ 4.401519] c1 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1310[ 4.401561] c1 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1311[ 4.401615] c1 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1312[ 4.401657] c1 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1313[ 4.401693] c1 269 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1314[ 4.404467] c1 269 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered 1315[ 4.453529] c2 384 slimbus:1 laddr:0xcb, EAPC:0x1:0xa0 1316[ 4.453564] c1 269 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1 1317[ 4.453763] c0 384 slimbus:1 laddr:0xca, EAPC:0x0:0xa0 1318[ 4.453972] c0 384 wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0 1319[ 4.454588] c0 384 wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2 1320[ 4.454602] c0 384 wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4 1321[ 4.465781] c3 1 subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset 1322[ 4.465966] c1 384 tasha_codec tasha_codec: tasha_probe: Tasha driver probe done 1323[ 4.466645] c2 269 [AUD] snd_soc_msm8996: uart_gpios_init done 1324[ 4.466655] c2 269 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set 1325[ 4.466664] c2 269 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335 1326[ 4.466756] c2 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67 1327[ 4.466781] c2 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68 1328[ 4.466803] c2 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65 1329[ 4.466824] c2 269 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66 1330[ 4.466846] c2 269 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31 1331[ 4.469636] c2 269 tasha_codec tasha_codec: tasha_codec_probe() 1332[ 4.484194] c3 269 [AUD] snd_soc_wcd_mbhc: [AUD][HS] register_attributes 1333[ 4.484649] c3 269 wcd_mbhc_init: ret 0 -- 1334[ 4.484999] c3 269 tasha_codec tasha_codec: for cpe segments only will be dumped. 1335[ 4.500104] c2 263 dwc3_notify_vbus_work: pd_vbus_change = 0 1336[ 4.500117] c2 263 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine 1337[ 4.500572] c0 469 msm-dwc3 6a00000.ssusb: dwc3_msm_suspend unvote for TCXO buffer 1338[ 4.500682] c0 469 msm-dwc3 6a00000.ssusb: DWC3 in low power mode 1339[ 4.500698] c0 469 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0 1340[ 4.500703] c0 469 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0 1341[ 4.500711] c0 469 android_work: android_work: did not send uevent (0 0 (null)) 1342[ 4.500905] c0 42 SMBCHG: battchg_suspend: 1 voting for 0 - on 1343[ 4.500918] c0 42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1344[ 4.501411] c3 269 msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present 1345[ 4.503200] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer 1346[ 4.503209] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer 1347[ 4.503231] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer 1348[ 4.503236] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer 1349[ 4.503391] c2 24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500 1350[ 4.503462] c2 24 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping 1351[ 4.503468] c2 24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1) 1352[ 4.503483] c2 359 SMBCHG: set_aicl_enable: Enable AICL... 1353[ 4.503643] c2 24 SMBCHG: battchg_suspend: 1 voting for 0 - on 1354[ 4.503652] c2 24 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 1355[ 4.503657] c2 24 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1356[ 4.503792] c2 263 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 1357[ 4.509357] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX 1358[ 4.509370] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3 1359[ 4.513221] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer 1360[ 4.513235] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer 1361[ 4.514304] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer 1362[ 4.514315] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer 1363[ 4.515128] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX 1364[ 4.515137] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX 1365[ 4.518948] c0 52 subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up 1366[ 4.518989] c0 336 subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received 1367[ 4.519572] c3 269 msm8996-asoc-snd soc:sound-9335: control 2:0:0:PRI_MI2S_RX Port Mixer SLIM_0_TX:0 is already present 1368[ 4.519584] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget PRI_MI2S_RX Port Mixer dapm kcontrol PRI_MI2S_RX Port Mixer SLIM_0_TX: -16 1369[ 4.519592] c2 1 sysmon_send_event_no_qmi: Message sending failed -19 1370[ 4.519608] c2 1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded 1371[ 4.519980] c2 1 init: Starting service 'servicemanager'... 1372[ 4.520579] c2 1 init: Starting service 'surfaceflinger'... 1373[ 4.521141] c2 1 init: Starting service 'audioserver'... 1374[ 4.521326] c2 6 diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000 1375[ 4.521347] c1 268 diag: In socket_open_client, socket not initialized for SENSORS_CMD 1376[ 4.521810] c0 442 type=1400 audit(6133887.370:9): avc: denied { create } for pid=268 comm="kworker/u8:3" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0 1377[ 4.522155] c0 52 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service 1378[ 4.522243] c2 1 init: Starting service 'bootanim'... 1379[ 4.523948] c2 509 EXT4-fs (sda35): Ignoring removed nomblk_io_submit option 1380[ 4.550125] c2 509 EXT4-fs (sda35): 2 orphan inodes deleted 1381[ 4.550137] c2 509 EXT4-fs (sda35): recovery complete 1382[ 4.557943] c1 509 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit 1383[ 4.557979] c1 509 SELinux: initialized (dev sda35, type ext4), uses xattr 1384[ 4.558164] c1 509 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success 1385[ 4.563505] c1 509 fs_mgr: check_fs(): unmount(/data) succeeded 1386[ 4.563683] c1 509 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata 1387[ 4.618144] c3 269 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths 1388[ 4.709999] c3 269 tfa98xx 7-0034: tfa98xx codec registered () 1389[ 4.712470] c3 269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX 1390[ 4.712483] c3 269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback 1391[ 4.712509] c3 269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX 1392[ 4.712515] c3 269 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX 1393[ 4.714566] c3 30 tfa98xx 7-0034: Registered DSP instance with handle 0 1394[ 4.723991] c3 269 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: ++ 1395[ 4.724221] c3 269 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: -- 1396[ 4.724291] c3 269 [AUD] snd_soc_msm8996: msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx 1397[ 4.756058] c2 269 input: msm8996-tasha-marlin-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input7 1398[ 4.756168] c2 269 input: msm8996-tasha-marlin-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input8 1399[ 4.756320] c2 269 keychord: using input dev msm8996-tasha-marlin-snd-card Button Jack for fevent 1400[ 4.757106] c2 269 msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-marlin-snd-card registered 1401[ 4.757118] c2 269 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: cancel_delayed_work with card_det_work 1402[ 4.757130] c2 269 msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335 1403[ 4.757136] c2 269 [AUD] htc-acoustic: acoustic_register_ops 1404[ 4.757142] c2 269 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: probe successfully 1405[ 4.760913] c0 442 type=1400 audit(6133887.610:10): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1406[ 4.761182] c0 442 type=1400 audit(6133887.610:11): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1407[ 4.761250] c0 442 type=1400 audit(6133887.610:12): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1408[ 4.818089] c0 442 type=1400 audit(6133887.666:13): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1409[ 4.818211] c0 442 type=1400 audit(6133887.666:14): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1410[ 4.818281] c0 442 type=1400 audit(6133887.666:15): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1411[ 4.822702] c0 442 type=1400 audit(6133887.670:16): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1412[ 4.822804] c0 442 type=1400 audit(6133887.670:17): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1413[ 4.822920] c0 442 type=1400 audit(6133887.670:18): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1414[ 4.827297] c0 442 type=1400 audit(6133887.676:19): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1415[ 4.827419] c0 442 type=1400 audit(6133887.676:20): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1416[ 4.827475] c0 442 type=1400 audit(6133887.676:21): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1417[ 4.831079] c0 505 kgsl: _read_fw2_block_header: GPMU unknown header ID 6 1418[ 4.835587] c0 505 cpr3_regulator_measure_aging: gfx: average quotient delta=-7 (count=10) 1419[ 4.835998] c0 505 cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=338 uV 1420[ 4.848990] c0 442 type=1400 audit(6133887.696:22): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1421[ 4.849156] c0 442 type=1400 audit(6133887.696:23): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1422[ 4.849218] c0 442 type=1400 audit(6133887.696:24): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1423[ 4.851153] c0 505 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: loading from 0x0000000090e00000 to 0x0000000090e02000 1424[ 4.870989] c0 442 type=1400 audit(6133887.720:25): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1425[ 4.871163] c0 442 type=1400 audit(6133887.720:26): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1426[ 4.871237] c0 442 type=1400 audit(6133887.720:27): avc: denied { search } for pid=505 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1427[ 4.879430] c0 505 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: Brought out of reset 1428[ 4.880580] c0 357 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 5286380 1429[ 4.881392] c0 469 SMBCHG: battchg_suspend: 1 voting for 0 - on 1430[ 4.881415] c0 469 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 1431[ 4.881424] c0 469 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1432[ 4.881550] c0 469 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 1433[ 4.882853] c2 269 devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information. 1434[ 4.953523] c0 442 type=1400 audit(6133887.800:28): avc: denied { read write } for pid=505 comm="surfaceflinger" name="diag" dev="tmpfs" ino=15154 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 1435[ 4.955207] c2 258 [BATT][PD] Charger driver is not ready! 1436[ 4.980880] c2 258 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b) 1437[ 5.013064] c0 357 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 505140 1438[ 5.233629] c1 327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id1-batterydata, id_ohm=22866, raw_min=27501, raw_max=40000. 1439[ 5.233647] c1 327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id2-batterydata, id_ohm=22866, raw_min=0, raw_max=16000. 1440[ 5.233655] c1 327 of_batterydata_get_best_profile: Find batterydata path: qcom,s1-id3-batterydata, id_ohm=22866, raw_min=16001, raw_max=27500. 1441[ 5.233670] c1 327 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 277 1442[ 5.233676] c1 327 FG: fg_batt_profile_init: batt_fcc_ma = 2800 1443[ 5.233682] c1 327 FG: fg_batt_profile_init: batt_capacity_mah = 2770 1444[ 5.233688] c1 327 FG: fg_batt_profile_init: fcc_half_capacity_ma = 0 1445[ 5.239383] c1 327 SMBCHG: battchg_suspend: 0 voting for 0 - off 1446[ 5.246044] c1 327 FG: fg_batt_profile_init: Battery SOC: 100, V: 4264196uV 1447[ 5.246057] c1 327 [BATT] Probe process: (1, 3) 1448[ 5.246080] c1 327 [BATT] htc_battery_probe_process: catch name 3, set batt id=3, full_ma=277, fcc_ma=2800, capacity=2770, half_capacity_ma:0, pd_is_limited:1, batt_eoc_current_ma:50 1449[ 5.246086] c1 327 [BATT] Probe process done. 1450[ 5.246192] c1 18 SMBCHG: battchg_suspend: 1 voting for 0 - off 1451[ 5.246287] c1 18 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 1452[ 5.246291] c3 58 [BATT] batt_worker: total_time since last batt update = 14316262896 ms. 1453[ 5.246301] c1 18 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1454[ 5.246464] c1 344 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 1455[ 5.249153] c2 58 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0 1456[ 5.249165] c2 58 [BATT] read_batt_cycle_info: Checksum error: reset battery cycle data. 1457[ 5.249171] c2 58 [BATT] read_batt_cycle_info: g_batt_first_use_time = 6133888, g_overheat_55_sec = 0, g_total_level_raw = 0 1458[ 5.249178] c2 58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0 1459[ 5.249182] c2 58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50% 1460[ 5.249219] c2 58 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:6133888, store_time=0, batt_temp=315, store_temp=0, consistent_flag=0 at 5249209062 (1970-03-12 23:51:28.102111248 UTC) 1461[ 5.249227] c2 58 [BATT] pre_level=100,pre_raw_level=100,pre_five_digit=10,pre_chg_src=0 1462[ 5.249232] c2 58 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100 1463[ 5.249238] c2 58 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100% 1464[ 5.249243] c2 58 [BATT] write battery data: level:100, temp:315, time:6133888 at 5249232760 (1970-03-12 23:51:28.102138696 UTC) 1465[ 5.249250] c2 58 ignore the fist time on boot. 1466[ 5.249372] c2 24 SMBCHG: smbchg_cc_esr_wa_check: No inputs present, skipping 1467[ 5.249381] c2 24 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 1468[ 5.249386] c2 24 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1469[ 5.249453] c2 24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 1470[ 5.252272] c2 58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0 1471[ 5.252436] c2 58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39] 1472[ 5.252445] c2 58 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00] 1473[ 5.255438] c3 58 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=209mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=292,usb_overheat=0,level_accu=0 at 5255430052 (1970-03-12 23:51:28.108311249 UTC) 1474[ 5.255448] c3 58 [BATT] Device is at booting stage at 5255437813 (1970-03-12 23:51:28.108344686 UTC) 1475[ 5.296782] c3 269 [BATT] batt_worker: total_time since last batt update = 53 ms. 1476[ 5.299469] c2 269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0 1477[ 5.299480] c2 269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50% 1478[ 5.299486] c2 269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100% 1479[ 5.302263] c2 269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0 1480[ 5.302424] c2 269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39] 1481[ 5.302434] c2 269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00] 1482[ 5.305379] c3 269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=202mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=0 at 5305371151 (1970-03-12 23:51:28.158248598 UTC) 1483[ 5.305389] c3 269 [BATT] Device is at booting stage at 5305378391 (1970-03-12 23:51:28.158285368 UTC) 1484[ 5.350091] c2 269 [BATT] batt_worker: total_time since last batt update = 53 ms. 1485[ 5.353807] c2 269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0 1486[ 5.353818] c2 269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50% 1487[ 5.353824] c2 269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100% 1488[ 5.356589] c2 269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0 1489[ 5.356854] c2 269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39] 1490[ 5.356864] c2 269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00] 1491[ 5.359612] c2 269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=194mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=294,usb_overheat=0,level_accu=0 at 5359602823 (1970-03-12 23:51:28.212486624 UTC) 1492[ 5.359621] c2 269 [BATT] Device is at booting stage at 5359610323 (1970-03-12 23:51:28.212517353 UTC) 1493[ 5.816460] c0 505 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0 1494[ 5.817985] c0 505 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled 1495[ 5.818033] c0 505 [BATT] fb_notifier_callback-> display is On 1496[ 5.818034] c2 269 [BATT] batt_worker: total_time since last batt update = 466 ms. 1497[ 5.820558] c2 269 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0 1498[ 5.820568] c2 269 [BATT] calculate_batt_cycle_info: save batt cycle data every 50% 1499[ 5.820574] c2 269 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100% 1500[ 5.823195] c2 269 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=01,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=15mA,batfet_wa=0 1501[ 5.823387] c2 269 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9b,80,00],CHG_CFG[F0:F4]=[0f,04,1b,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39] 1502[ 5.823397] c2 269 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,00,00,08],USB_STS[0C:0F]=[00,00,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00] 1503[ 5.826231] c2 269 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=176mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=291,usb_overheat=0,level_accu=0 at 5826222557 (1970-03-12 23:51:28.679100420 UTC) 1504[ 5.826241] c2 269 [BATT] Device is at booting stage at 5826230266 (1970-03-12 23:51:28.679137191 UTC) 1505[ 5.887413] c2 509 e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1506[ 5.887413] c2 509 1507[ 5.887444] c2 509 e2fsck: Pass 1: Checking inodes, blocks, and sizes 1508[ 5.887444] c2 509 1509[ 5.887454] c2 509 e2fsck: Pass 2: Checking directory structure 1510[ 5.887454] c2 509 1511[ 5.887462] c2 509 e2fsck: Pass 3: Checking directory connectivity 1512[ 5.887462] c2 509 1513[ 5.887471] c2 509 e2fsck: Pass 4: Checking reference counts 1514[ 5.887471] c2 509 1515[ 5.887479] c2 509 e2fsck: Pass 5: Checking group summary information 1516[ 5.887479] c2 509 1517[ 5.887487] c2 509 e2fsck: /dev/block/bootdevice/by-name/userdata: 5297/7487488 files (10.2% non-contiguous), 1177701/29939712 blocks 1518[ 5.887487] c2 509 1519[ 5.890124] c0 357 SMBCHG: usbin_uv_handler: chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 5286380 1520[ 5.890250] c0 42 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 1521[ 5.890259] c0 42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1522[ 5.890366] c0 42 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2) 1523[ 5.895026] c3 509 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc 1524[ 5.895051] c3 509 SELinux: initialized (dev sda35, type ext4), uses xattr 1525[ 5.895106] c3 509 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0 1526[ 5.895139] c3 509 fs_mgr: /data is file encrypted 1527[ 5.896789] c2 1 init: Starting service 'debuggerd'... 1528[ 5.897221] c2 1 init: Starting service 'debuggerd64'... 1529[ 5.897780] c2 1 init: Starting service 'vold'... 1530[ 5.965566] c2 258 [BATT][PD] Set ID(0), pd_is_limited:1, List: [0]:15W(5000mV-3000mA) 1531[ 5.979968] c0 507 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3 1532[ 5.998948] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22 1533[ 5.999237] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22 1534[ 5.999502] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 1535[ 5.999512] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385 1536[ 5.999768] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 1537[ 5.999779] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385 1538[ 6.002148] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22 1539[ 6.002666] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22 1540[ 6.003056] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 1541[ 6.003100] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101 1542[ 6.003348] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 1543[ 6.003831] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101 1544[ 6.011414] c2 258 FUSB platform_notify_pd_contract: Contract=[1], typec_state(0x4), pd_state(0x22) 1545[ 6.011427] c2 258 dwc3_pd_vbus_ctrl: set pd vbus flag to 0 1546[ 6.014976] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1547[ 6.016500] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1548[ 6.018275] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1549[ 6.019045] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1550[ 6.021208] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1551[ 6.021674] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1552[ 6.023605] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1553[ 6.023616] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1554[ 6.023660] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1555[ 6.023667] c2 258 FUSB StateMachineTypeC: enter 1556[ 6.024059] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1557[ 6.025454] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1558[ 6.034447] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1559[ 6.034464] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1560[ 6.040282] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1561[ 6.040297] c2 258 FUSB StateMachineTypeC: enter 1562[ 6.042266] c0 507 msm_pcm_volume_ctl_get substream runtime not found 1563[ 6.042661] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1564[ 6.048994] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1565[ 6.051682] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1566[ 6.051694] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1567[ 6.051741] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1568[ 6.051747] c2 258 FUSB StateMachineTypeC: enter 1569[ 6.052150] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1570[ 6.055884] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1571[ 6.057549] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1572[ 6.058964] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 1573[ 6.063041] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1574[ 6.063056] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1575[ 6.081960] c0 507 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state 1576[ 6.081985] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0 1577[ 6.081993] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1 1578[ 6.082001] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2 1579[ 6.082008] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3 1580[ 6.108629] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1581[ 6.108662] c2 258 FUSB StateMachineTypeC: enter 1582[ 6.110581] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1583[ 6.110590] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1584[ 6.110636] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1585[ 6.110642] c2 258 FUSB StateMachineTypeC: enter 1586[ 6.112600] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1587[ 6.112610] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1588[ 6.112658] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1589[ 6.112664] c3 258 FUSB StateMachineTypeC: enter 1590[ 6.114585] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1591[ 6.114595] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1592[ 6.114639] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1593[ 6.114645] c3 258 FUSB StateMachineTypeC: enter 1594[ 6.116590] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1595[ 6.116599] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1596[ 6.116644] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1597[ 6.116650] c3 258 FUSB StateMachineTypeC: enter 1598[ 6.118569] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1599[ 6.118577] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1600[ 6.118635] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1601[ 6.118641] c3 258 FUSB StateMachineTypeC: enter 1602[ 6.120554] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1603[ 6.120562] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1604[ 6.120633] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1605[ 6.120639] c3 258 FUSB StateMachineTypeC: enter 1606[ 6.122538] c3 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1607[ 6.122549] c3 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1608[ 6.122622] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1609[ 6.122630] c2 258 FUSB StateMachineTypeC: enter 1610[ 6.124538] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1611[ 6.124546] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1612[ 6.124594] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1613[ 6.124600] c2 258 FUSB StateMachineTypeC: enter 1614[ 6.126521] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1615[ 6.126529] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1616[ 6.126576] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1617[ 6.126582] c2 258 FUSB StateMachineTypeC: enter 1618[ 6.128497] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1619[ 6.128505] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1620[ 6.128555] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1621[ 6.128561] c2 258 FUSB StateMachineTypeC: enter 1622[ 6.130459] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1623[ 6.130468] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1624[ 6.130533] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1625[ 6.130538] c2 258 FUSB StateMachineTypeC: enter 1626[ 6.132400] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1627[ 6.132406] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1628[ 6.132460] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1629[ 6.132464] c2 258 FUSB StateMachineTypeC: enter 1630[ 6.134367] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1631[ 6.134373] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1632[ 6.134425] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1633[ 6.134430] c2 258 FUSB StateMachineTypeC: enter 1634[ 6.136307] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1635[ 6.136312] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1636[ 6.136361] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1637[ 6.136366] c2 258 FUSB StateMachineTypeC: enter 1638[ 6.138256] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1639[ 6.138261] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1640[ 6.138333] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1641[ 6.138337] c2 258 FUSB StateMachineTypeC: enter 1642[ 6.140216] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1643[ 6.140220] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1644[ 6.140266] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1645[ 6.140271] c2 258 FUSB StateMachineTypeC: enter 1646[ 6.142145] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1647[ 6.142150] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1648[ 6.142214] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1649[ 6.142219] c2 258 FUSB StateMachineTypeC: enter 1650[ 6.144095] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1651[ 6.144100] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1652[ 6.144151] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1653[ 6.144155] c2 258 FUSB StateMachineTypeC: enter 1654[ 6.146035] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1655[ 6.146040] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1656[ 6.146084] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1657[ 6.146088] c2 258 FUSB StateMachineTypeC: enter 1658[ 6.147997] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1659[ 6.148002] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1660[ 6.148091] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1661[ 6.148096] c2 258 FUSB StateMachineTypeC: enter 1662[ 6.149989] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1663[ 6.149993] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1664[ 6.150032] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1665[ 6.150037] c2 258 FUSB StateMachineTypeC: enter 1666[ 6.151960] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1667[ 6.151965] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1668[ 6.152069] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1669[ 6.152073] c2 258 FUSB StateMachineTypeC: enter 1670[ 6.153924] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1671[ 6.153929] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1672[ 6.153998] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1673[ 6.154003] c2 258 FUSB StateMachineTypeC: enter 1674[ 6.155919] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1675[ 6.155923] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1676[ 6.155998] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1677[ 6.156003] c2 258 FUSB StateMachineTypeC: enter 1678[ 6.157861] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1679[ 6.157866] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1680[ 6.157915] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1681[ 6.157920] c2 258 FUSB StateMachineTypeC: enter 1682[ 6.159851] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1683[ 6.159855] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1684[ 6.159907] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1685[ 6.159912] c2 258 FUSB StateMachineTypeC: enter 1686[ 6.161863] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1687[ 6.161868] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1688[ 6.161966] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1689[ 6.161970] c2 258 FUSB StateMachineTypeC: enter 1690[ 6.163862] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1691[ 6.163867] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1692[ 6.163922] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1693[ 6.163926] c2 258 FUSB StateMachineTypeC: enter 1694[ 6.165868] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1695[ 6.165874] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1696[ 6.165929] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1697[ 6.165934] c2 258 FUSB StateMachineTypeC: enter 1698[ 6.167810] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1699[ 6.167815] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1700[ 6.167866] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1701[ 6.167871] c2 258 FUSB StateMachineTypeC: enter 1702[ 6.169783] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1703[ 6.169787] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1704[ 6.169830] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1705[ 6.169835] c2 258 FUSB StateMachineTypeC: enter 1706[ 6.171701] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1707[ 6.171706] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1708[ 6.171752] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1709[ 6.171757] c2 258 FUSB StateMachineTypeC: enter 1710[ 6.173660] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1711[ 6.173664] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1712[ 6.173707] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1713[ 6.173711] c2 258 FUSB StateMachineTypeC: enter 1714[ 6.175606] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1715[ 6.175611] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1716[ 6.175668] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1717[ 6.175673] c2 258 FUSB StateMachineTypeC: enter 1718[ 6.177557] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1719[ 6.177562] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1720[ 6.177607] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1721[ 6.177612] c2 258 FUSB StateMachineTypeC: enter 1722[ 6.179515] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1723[ 6.179520] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1724[ 6.179566] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1725[ 6.179571] c2 258 FUSB StateMachineTypeC: enter 1726[ 6.181427] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1727[ 6.181433] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1728[ 6.181489] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1729[ 6.181494] c2 258 FUSB StateMachineTypeC: enter 1730[ 6.183366] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1731[ 6.183371] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1732[ 6.183428] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1733[ 6.183432] c2 258 FUSB StateMachineTypeC: enter 1734[ 6.185391] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1735[ 6.185397] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1736[ 6.185451] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1737[ 6.185460] c2 258 FUSB StateMachineTypeC: enter 1738[ 6.187321] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1739[ 6.187326] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1740[ 6.187371] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1741[ 6.187376] c2 258 FUSB StateMachineTypeC: enter 1742[ 6.189279] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1743[ 6.189285] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1744[ 6.189334] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1745[ 6.189339] c2 258 FUSB StateMachineTypeC: enter 1746[ 6.191196] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1747[ 6.191201] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1748[ 6.191255] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1749[ 6.191260] c2 258 FUSB StateMachineTypeC: enter 1750[ 6.193158] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1751[ 6.193163] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1752[ 6.193217] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1753[ 6.193222] c2 258 FUSB StateMachineTypeC: enter 1754[ 6.195112] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1755[ 6.195118] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1756[ 6.195172] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1757[ 6.195177] c2 258 FUSB StateMachineTypeC: enter 1758[ 6.197070] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1759[ 6.197075] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1760[ 6.197125] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1761[ 6.197130] c2 258 FUSB StateMachineTypeC: enter 1762[ 6.199004] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1763[ 6.199009] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1764[ 6.199060] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1765[ 6.199065] c2 258 FUSB StateMachineTypeC: enter 1766[ 6.200941] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1767[ 6.200947] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1768[ 6.200997] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1769[ 6.201001] c2 258 FUSB StateMachineTypeC: enter 1770[ 6.202900] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1771[ 6.202905] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1772[ 6.202952] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1773[ 6.202957] c2 258 FUSB StateMachineTypeC: enter 1774[ 6.204839] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1775[ 6.204845] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1776[ 6.204894] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1777[ 6.204898] c2 258 FUSB StateMachineTypeC: enter 1778[ 6.206828] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1779[ 6.206833] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1780[ 6.206879] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1781[ 6.206884] c2 258 FUSB StateMachineTypeC: enter 1782[ 6.208733] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1783[ 6.208738] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1784[ 6.208816] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1785[ 6.208820] c2 258 FUSB StateMachineTypeC: enter 1786[ 6.210751] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1787[ 6.210756] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1788[ 6.210810] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1789[ 6.210815] c2 258 FUSB StateMachineTypeC: enter 1790[ 6.212726] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1791[ 6.212730] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1792[ 6.212782] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1793[ 6.212787] c2 258 FUSB StateMachineTypeC: enter 1794[ 6.214649] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1795[ 6.214655] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1796[ 6.214704] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1797[ 6.214709] c2 258 FUSB StateMachineTypeC: enter 1798[ 6.216624] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1799[ 6.216630] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1800[ 6.216713] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1801[ 6.216718] c2 258 FUSB StateMachineTypeC: enter 1802[ 6.218597] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1803[ 6.218602] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1804[ 6.218667] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1805[ 6.218672] c2 258 FUSB StateMachineTypeC: enter 1806[ 6.220574] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1807[ 6.220581] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1808[ 6.220637] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1809[ 6.220642] c2 258 FUSB StateMachineTypeC: enter 1810[ 6.222515] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1811[ 6.222520] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1812[ 6.222568] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1813[ 6.222573] c2 258 FUSB StateMachineTypeC: enter 1814[ 6.224458] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1815[ 6.224463] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1816[ 6.224508] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1817[ 6.224513] c2 258 FUSB StateMachineTypeC: enter 1818[ 6.226404] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1819[ 6.226409] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1820[ 6.226459] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1821[ 6.226464] c2 258 FUSB StateMachineTypeC: enter 1822[ 6.228352] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1823[ 6.228358] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1824[ 6.228415] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1825[ 6.228420] c2 258 FUSB StateMachineTypeC: enter 1826[ 6.230315] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1827[ 6.230320] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1828[ 6.230364] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1829[ 6.230369] c2 258 FUSB StateMachineTypeC: enter 1830[ 6.232216] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1831[ 6.232221] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1832[ 6.232275] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1833[ 6.232280] c2 258 FUSB StateMachineTypeC: enter 1834[ 6.234171] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1835[ 6.234176] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1836[ 6.234232] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1837[ 6.234237] c2 258 FUSB StateMachineTypeC: enter 1838[ 6.236136] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1839[ 6.236141] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1840[ 6.236190] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1841[ 6.236195] c2 258 FUSB StateMachineTypeC: enter 1842[ 6.238107] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1843[ 6.238112] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1844[ 6.238162] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1845[ 6.238166] c2 258 FUSB StateMachineTypeC: enter 1846[ 6.240052] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1847[ 6.240057] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1848[ 6.240108] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1849[ 6.240113] c2 258 FUSB StateMachineTypeC: enter 1850[ 6.241996] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1851[ 6.242001] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1852[ 6.242060] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1853[ 6.242064] c2 258 FUSB StateMachineTypeC: enter 1854[ 6.243957] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1855[ 6.243962] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1856[ 6.244017] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt triggered ++ 1857[ 6.244021] c2 258 FUSB StateMachineTypeC: enter 1858[ 6.245888] c2 258 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22) 1859[ 6.245893] c2 258 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++ 1860[ 6.258163] c0 507 wcdcal_hwdep_ioctl_shared: incorrect firmware size 154 for vbat 1861[ 6.284773] c2 1 init: Not bootcharting. 1862[ 6.286202] c2 24 get_ice_device_from_storage_type: found ice device ffffffc03202a000 1863[ 6.287216] c2 24 get_ice_device_from_storage_type: found ice device ffffffc03202a000 1864[ 6.433166] c2 1 init: Starting service 'exec 3 (/system/bin/tzdatacheck)'... 1865[ 6.439684] c2 1 init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 575) exited with status 0 1866[ 6.441530] c2 1 init: Service 'qseecomd' is being killed... 1867[ 6.442919] c2 1 init: Service 'qseecomd' (pid 443) killed by signal 9 1868[ 6.442936] c2 1 init: Service 'qseecomd' (pid 443) killing any children in process group 1869[ 6.443001] c2 1 init: Untracked pid 446 killed by signal 9 1870[ 6.446856] c3 1 sps:debugfs:input BAM physical address:0x7544000 1871[ 6.446870] c3 1 sps:no dump option is chosen yet.init: Starting service 'exec 4 (/system/bin/otapreopt_slot)'... 1872[ 6.489292] c2 1 init: Service 'exec 4 (/system/bin/otapreopt_slot)' (pid 576) exited with status 0 1873[ 6.490112] c2 1 init: SELinux: Could not stat /data/dalvik-cache/mips: No such file or directory. 1874[ 6.490154] c2 1 init: SELinux: Could not stat /data/dalvik-cache/mips64: No such file or directory. 1875[ 6.490185] c2 1 init: SELinux: Could not stat /data/dalvik-cache/x86: No such file or directory. 1876[ 6.490216] c2 1 init: SELinux: Could not stat /data/dalvik-cache/x86_64: No such file or directory. 1877[ 6.490913] c2 1 init: Starting service 'exec 5 (/system/bin/recovery-persist)'... 1878[ 6.496410] c2 1 init: Service 'exec 5 (/system/bin/recovery-persist)' (pid 579) exited with status 0 1879[ 6.496668] c2 1 init: Starting service 'exec 6 (/system/bin/bootstat)'... 1880[ 6.507257] c2 1 init: Service 'exec 6 (/system/bin/bootstat)' (pid 580) exited with status 0 1881[ 6.585014] c3 1 init: Starting service 'logd-reinit'... 1882[ 6.585416] c3 1 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}' 1883[ 6.585430] c3 1 init: write: cannot expand '${persist.sys.ssr.enable_debug}' 1884[ 6.585446] c3 1 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}' 1885[ 6.585454] c3 1 init: write: cannot expand '${persist.sys.mba_boot_timeout}' 1886[ 6.585468] c3 1 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}' 1887[ 6.585476] c3 1 init: write: cannot expand '${persist.sys.modem_auth_timeout}' 1888[ 6.585490] c3 1 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}' 1889[ 6.585498] c3 1 init: write: cannot expand '${persist.sys.pil_proxy_timeout}' 1890[ 6.587239] c3 1 init: Starting service 'healthd'... 1891[ 6.587688] c3 1 init: Starting service 'per_mgr'... 1892[ 6.588012] c3 1 init: Starting service 'qseecomd'... 1893[ 6.588425] c3 1 init: Starting service 'irsc_util'... 1894[ 6.588822] c3 1 init: Starting service 'rmt_storage'... 1895[ 6.589265] c3 1 init: Starting service 'msm_irqbalance'... 1896[ 6.589728] c3 1 init: Starting service 'lmkd'... 1897[ 6.590235] c3 1 init: Starting service 'exec 7 (/system/bin/init.power.sh)'... 1898[ 6.594598] c2 582 healthd: Unknown power supply type 'Wipower' 1899[ 6.594652] c2 582 healthd: Unknown power supply type 'BMS' 1900[ 6.594693] c2 582 healthd: Unknown power supply type 'BMS' 1901[ 6.594824] c2 582 healthd: Unknown power supply type 'USB_Parallel' 1902[ 6.594866] c2 582 healthd: Unknown power supply type 'BMS' 1903[ 6.595169] c2 582 healthd: BatteryFullChargePath not found 1904[ 6.595179] c2 582 healthd: BatteryCycleCountPath not found 1905[ 6.597190] c2 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=3 c=698 chg= 1906[ 6.610741] c2 589 msm_thermal:store_cc_enabled Core control disabled 1907[ 6.613834] c0 442 type=1400 audit(6133889.460:29): avc: granted { net_bind_service } for pid=586 comm="rmt_storage" capability=10 scontext=u:r:rmt:s0 tcontext=u:r:rmt:s0 tclass=capability 1908[ 6.628508] c3 1 init: Service 'irsc_util' (pid 585) exited with status 0 1909[ 6.629576] c2 589 msm_thermal:store_cc_enabled Core control enabled 1910[ 6.629636] c2 589 msm_thermal:update_offline_cores cpus_offlined: 0 1911[ 6.629683] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1912[ 6.629711] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1913[ 6.629742] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1914[ 6.629767] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1915[ 6.629797] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1916[ 6.629820] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1917[ 6.629849] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1918[ 6.629872] c2 589 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0 1919[ 6.635771] c0 436 logd.daemon: reinit 1920[ 6.644141] c3 1 init: Service 'logd-reinit' (pid 581) exited with status 0 1921[ 6.662888] c3 1 init: Service 'exec 7 (/system/bin/init.power.sh)' (pid 589) exited with status 0 1922[ 6.663211] c3 1 init: Starting service 'exec 8 (/system/bin/init.mid.sh)'... 1923[ 6.685532] c0 442 type=1400 audit(6133889.530:30): avc: denied { search } for pid=600 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 1924[ 6.692488] c3 1 init: Service 'exec 8 (/system/bin/init.mid.sh)' (pid 605) exited with status 0 1925[ 6.693766] c3 1 init: Starting service 'exec 9 (/system/bin/init.foreground.sh)'... 1926[ 6.745171] c2 359 SMBCHG: src_detect_handler: chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0 1927[ 6.745232] c2 359 SMBCHG: handle_usb_insertion: triggered 1928[ 6.745260] c2 359 SMBCHG: handle_usb_insertion: inserted type = 9 (USB_PD) 1929[ 6.745266] c2 359 SMBCHG: smbchg_change_usb_supply_type: Type 9: setting mA = 3000 1930[ 6.745272] c2 359 SMBCHG: usb_icl: 0 voting for 3000 - on 1931[ 6.745278] c2 359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 3000 1932[ 6.745282] c2 359 SMBCHG: usb_suspend: 2 voting for 0 - off 1933[ 6.745409] c0 365 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(6133887068) diff(1838919772) count_same_dischg(0) limit_iusb(0) 1934[ 6.745425] c2 359 SMBCHG: smbchg_set_usb_current_max: usb type = 9 current set to 3000 mA 1935[ 6.745442] c2 359 SMBCHG: set_aicl_enable: Disable AICL... 1936[ 6.745490] c2 359 SMBCHG: smbchg_rerun_aicl: PD charger donot rerun AICL. 1937[ 6.745495] c2 359 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1) 1938[ 6.745517] c2 359 msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb TCXO enabled 1939[ 6.745620] c2 359 SMBCHG: set_aicl_enable: Disable AICL... 1940[ 6.745671] c2 359 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1 1941[ 6.745833] c2 263 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 1942[ 6.747589] c2 263 [BATT] htc_batt_stats_1.1: begin charging: level=100, at=1970-03-12 23:51:29 UTC 1943[ 6.747604] c2 263 [BATT] charger_exist_lock Lock at 6747596451 (1970-03-12 23:51:29.600499835 UTC) 1944[ 6.747886] c2 58 [BATT] batt_worker: total_time since last batt update = 930 ms. 1945[ 6.748226] c3 359 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 20 -> 20 1946[ 6.748509] c3 359 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 20 -> 4 1947[ 6.748650] c2 263 [BATT] chg_full_check_worker: vol:4264, curr=698, is_full_count=0, is_full=0 at 6748640514 (1970-03-12 23:51:29.601544575 UTC) 1948[ 6.751348] c2 58 [BATT] set_batt_psy_property. value(1) prop(89) at 6751343066 (1970-03-12 23:51:29.604241867 UTC) 1949[ 6.751366] c2 58 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-03-12 23:51:28, g_overheat_55_sec = 0, g_total_level_raw = 0 1950[ 6.751371] c2 58 [BATT] calculate_batt_cycle_info: save batt cycle data every 50% 1951[ 6.751377] c2 58 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level! 1952[ 6.751384] c2 58 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0 1953[ 6.751446] c2 58 [BATT] ibat_max=2800000,ibat_new=1400000,prev_vol_limit=1,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 6751435566 (1970-03-12 23:51:29.604339575 UTC) 1954[ 6.751454] c2 58 [BATT] set ibat max(1400000),ibat_total=2600000[2600000,0],ibat_total_new=1400000,is_parallel=0 at 6751443379 (1970-03-12 23:51:29.604348846 UTC) 1955[ 6.751461] c2 58 [BATT] set_batt_psy_property. value(1400000) prop(32) at 6751449993 (1970-03-12 23:51:29.604356606 UTC) 1956[ 6.751468] c2 58 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 1400 1957[ 6.751473] c2 58 SMBCHG: fcc: 1 voting for 1400 - on 1958[ 6.751528] c2 58 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1400, set to 1400 1959[ 6.751536] c2 58 [BATT] set charging_enable(1) at 6751525566 (1970-03-12 23:51:29.604432388 UTC) 1960[ 6.751542] c2 58 [BATT] set_batt_psy_property. value(1) prop(68) at 6751532076 (1970-03-12 23:51:29.604438638 UTC) 1961[ 6.751549] c2 58 [BATT] set pwrsrc_enable(1) at 6751539004 (1970-03-12 23:51:29.604445669 UTC) 1962[ 6.751556] c2 58 [BATT] set_batt_psy_property. value(1) prop(69) at 6751545514 (1970-03-12 23:51:29.604451971 UTC) 1963[ 6.754236] c2 58 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=07,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=1,wake_reason=1,smb_curr=15mA,batfet_wa=0 1964[ 6.754408] c2 58 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,8b,89,00],CHG_CFG[F0:F4]=[0f,04,0b,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,01],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,2a,04,d0,39] 1965[ 6.754417] c2 58 [BATT][SMBCHG] USB_STS[07:0B]=[1f,02,02,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,1f,00,11,ab],MISC_CFG[F0:F4]=[0f,00,12,0a,25],MISC_CFG[F5:F9]=[38,18,a3,02,00],MISC_CFG[FA:FF]=[00,06,c1,05,e1,02],SMB1351[00:06]=[06,1c,87,ef,08,11,6b,],[32]=[00] 1966[ 6.757030] c2 58 [BATT] cable_impedance: 0, R_cable_impedance: 0, aicl_result: 0 at 6757021869 (1970-03-12 23:51:29.609923274 UTC) 1967[ 6.757082] c2 58 [BATT] ID=3,level=100,level_raw=100,vol=4264mV,temp=315,current=698695uA,chg_name=PD5V_3A,chg_src=2,chg_en=2,health=1,overload=0,duration=0min,vbus=4892mV,max_iusb=3000mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=3000mA,htc_ext=0x00,usb_temp=288,usb_overheat=0,level_accu=0 at 6757072702 (1970-03-12 23:51:29.609961555 UTC) 1968[ 6.757090] c2 58 [BATT] Device is at booting stage at 6757079473 (1970-03-12 23:51:29.609986294 UTC) 1969[ 6.758949] c3 1 init: Service 'exec 9 (/system/bin/init.foreground.sh)' (pid 614) exited with status 0 1970[ 6.759973] c3 1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory 1971[ 6.759999] c3 1 init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory 1972[ 6.761371] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory 1973[ 6.761397] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory 1974[ 6.761417] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory 1975[ 6.761438] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory 1976[ 6.761458] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory 1977[ 6.761478] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory 1978[ 6.761498] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory 1979[ 6.761519] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory 1980[ 6.761539] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory 1981[ 6.761559] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory 1982[ 6.761578] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory 1983[ 6.761598] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory 1984[ 6.761618] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory 1985[ 6.761638] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory 1986[ 6.761657] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory 1987[ 6.761676] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory 1988[ 6.761695] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory 1989[ 6.761714] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory 1990[ 6.761734] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory 1991[ 6.761753] c3 1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory 1992[ 6.762360] c3 1 enable_store: android_usb: already disabled 1993[ 6.762526] c3 1 init: Starting service 'adbd'... 1994[ 6.762866] c3 1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory 1995[ 6.763064] c3 1 init: Starting service 'per_proxy'... 1996[ 6.763613] c3 1 init: Starting service 'exec 10 (/system/bin/update_verifier)'... 1997[ 6.780122] c3 621 read descriptors 1998[ 6.780162] c3 621 read strings 1999[ 6.783410] c2 263 dwc3_notify_vbus_work: pd_vbus_change = 0 2000[ 6.783423] c2 263 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine 2001[ 6.783458] c2 263 [USB] b_sess_vld, chg_type=5, PolicyIsDFP=0, dwc3_vbus_boost=0 2002[ 6.783474] c2 263 msm-dwc3 6a00000.ssusb: dwc3_msm_resume xo_vote_for_charger = 1 2003[ 6.785120] c2 596 subsys-restart: __subsystem_get(): Changing subsys fw_name to modem 2004[ 6.785830] c2 263 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13 2005[ 6.787167] c2 263 msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode 2006[ 6.788898] c3 1 init: Service 'exec 10 (/system/bin/update_verifier)' (pid 620) exited with status 0 2007[ 6.788965] c3 1 init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery' 2008[ 6.789175] c3 1 init: Starting service 'thermal-engine'... 2009[ 6.789644] c3 1 init: Starting service 'adsprpcd'... 2010[ 6.790009] c2 596 IPA received MPSS BEFORE_POWERUP 2011[ 6.790085] c3 1 init: Starting service 'imsqmidaemon'... 2012[ 6.790486] c2 596 ipa ipa2_uc_state_check:301 uC is not loaded 2013[ 6.790508] c2 596 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2014[ 6.790559] c3 1 init: Starting service 'ssr_setup'... 2015[ 6.791053] c3 1 init: Starting service 'port-bridge'... 2016[ 6.791330] c2 596 IPA BEFORE_POWERUP handling is complete 2017[ 6.791494] c3 1 init: Starting service 'netmgrd'... 2018[ 6.791995] c3 1 init: Service qti does not have a SELinux domain defined. 2019[ 6.792081] c2 596 pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008e9f0000 2020[ 6.792141] c3 1 init: Starting service 'perfd'... 2021[ 6.792639] c3 1 init: Starting service 'zygote'... 2022[ 6.793078] c3 1 init: Starting service 'zygote_secondary'... 2023[ 6.793617] c3 1 init: Starting service 'cameraserver'... 2024[ 6.794091] c3 1 init: Starting service 'drm'... 2025[ 6.794557] c3 1 init: Starting service 'installd'... 2026[ 6.795040] c3 1 init: Starting service 'keystore'... 2027[ 6.795515] c3 1 init: Starting service 'mediacodec'... 2028[ 6.795974] c3 1 init: Starting service 'mediadrm'... 2029[ 6.796440] c3 1 init: Starting service 'mediaextractor'... 2030[ 6.798208] c3 1 init: Starting service 'media'... 2031[ 6.798741] c3 1 init: Starting service 'netd'... 2032[ 6.799223] c3 1 init: Starting service 'ril-daemon'... 2033[ 6.799841] c3 1 init: Starting service 'fingerprintd'... 2034[ 6.800768] c2 405 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 2035[ 6.800878] c2 405 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 2036[ 6.806136] c2 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2037[ 6.807565] c3 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2038[ 6.808524] c3 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2039[ 6.809419] c3 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2040[ 6.810342] c3 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2041[ 6.818918] c3 1 init: Starting service 'time_daemon'... 2042[ 6.819437] c3 1 init: Starting service 'cnd'... 2043[ 6.819945] c3 1 init: Starting service 'cnss_diag'... 2044[ 6.820532] c3 1 init: Starting service 'cnss-daemon'... 2045[ 6.821045] c3 1 init: Starting service 'loc_launcher'... 2046[ 6.821536] c3 1 init: Starting service 'init-radio-sh'... 2047[ 6.822107] c3 1 init: Starting service 'nanohub_slpi'... 2048[ 6.822636] c3 1 init: Starting service 'gatekeeperd'... 2049[ 6.823205] c3 1 init: Starting service 'update_engine'... 2050[ 6.825185] c3 1 init: Service 'ssr_setup' (pid 631) exited with status 0 2051[ 6.825692] c0 629 'opened /dev/adsprpc-smd c 215 0' 2052[ 6.832515] c3 634 devbw soc:qcom,cpubw: dev_pm_opp_get_opp_count: device OPP not found (-19) 2053[ 6.868276] c2 442 type=1400 audit(6133889.716:31): avc: denied { read write } for pid=630 comm="imsqmidaemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2054[ 6.868547] c2 596 pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue. 2055[ 6.873592] c2 596 pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f7100000 to 0x00000000f7200000 size 100000 2056[ 6.889121] c2 1 init: Starting service 'imsdatadaemon'... 2057[ 6.922774] c2 442 type=1400 audit(6133889.770:32): avc: denied { dac_override } for pid=670 comm="thermal-engine" capability=1 scontext=u:r:thermal-engine:s0 tcontext=u:r:thermal-engine:s0 tclass=capability permissive=0 2058[ 6.926823] c2 442 type=1400 audit(6133889.773:33): avc: denied { dac_override } for pid=633 comm="netmgrd" capability=1 scontext=u:r:netmgrd:s0 tcontext=u:r:netmgrd:s0 tclass=capability permissive=0 2059[ 6.931979] c2 1 init: Service 'cnss_diag' (pid 651) exited with status 255 2060[ 6.936898] c2 442 type=1400 audit(6133889.780:34): avc: denied { dac_override } for pid=651 comm="cnss_diag" capability=1 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability permissive=0 2061[ 6.945248] c2 596 pil-q6v5-mss 2080000.qcom,mss: MBA boot done 2062[ 6.945435] c3 655 'opened /dev/sdsprpc-smd c 215 1' 2063[ 6.994540] c2 442 type=1400 audit(6133889.843:35): avc: granted { net_admin } for pid=652 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability 2064[ 6.996829] c2 1 init: Service 'init-radio-sh' (pid 654) exited with status 0 2065[ 7.009238] c3 759 msm_thermal:interrupt_mode_init switch to interrupt mode 2066[ 7.009238] c3 759 , 2067[ 7.009282] c3 759 msm_thermal:disable_msm_thermal Max frequency reset for CPU0 2068[ 7.009289] c3 759 msm_thermal:disable_msm_thermal Max frequency reset for CPU1 2069[ 7.009293] c3 759 msm_thermal:disable_msm_thermal Max frequency reset for CPU2 2070[ 7.009298] c3 759 msm_thermal:disable_msm_thermal Max frequency reset for CPU3 2071[ 7.012168] c0 301 msm_thermal:hotplug_notify tsens_tz_sensor9 reach temp threshold: 648 2072[ 7.021309] c3 759 msm_thermal:set_enabled enabled = 0 2073[ 7.021460] c1 442 type=1400 audit(6133889.846:36): avc: denied { read write } for pid=754 comm="cnss-daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:cnss-daemon:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2074[ 7.022214] c3 759 msm_thermal:store_cpus_offlined "thermal-engine"(PID:759) request cpus offlined mask 0 2075[ 7.031929] c1 442 type=1400 audit(1505257742.562:37): avc: denied { read write } for pid=768 comm="time_daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:time:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2076[ 7.044025] c0 644 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3 2077[ 7.057548] c1 442 type=1400 audit(1505257742.572:38): avc: denied { read write } for pid=650 comm="cnd" name="diag" dev="tmpfs" ino=15154 scontext=u:r:cnd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2078[ 7.058638] c0 469 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0 2079[ 7.058653] c0 469 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0 2080[ 7.058753] c0 469 android_work: android_work: sent uevent USB_STATE=CONNECTED 2081[ 7.058760] c0 469 android_work: [USB] android_work: set usb_connect2pc = 1 2082[ 7.095632] c0 350 SMBCHG: fastchg_handler: p2f triggered 2083[ 7.095663] c0 350 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 2084[ 7.098346] c2 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2085[ 7.114398] c1 458 nanohub: nanohub_bl_read_memory: status=79, addr=08000000, length=173396 2086[ 7.115232] c1 458 nanohub: i=0, erase=0, erase_write=1, write=0 2087[ 7.115244] c1 458 nanohub: i=1, erase=0, erase_write=1, write=0 2088[ 7.115250] c1 458 nanohub: i=2, erase=0, erase_write=1, write=0 2089[ 7.115255] c1 458 nanohub: i=3, erase=0, erase_write=1, write=0 2090[ 7.115286] c1 458 nanohub nanohub: nanohub_download_bl: status=79 2091[ 7.127479] c2 442 type=1400 audit(1505257742.659:39): avc: denied { read write } for pid=668 comm="imsdatadaemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2092[ 7.129464] c0 67 android_usb gadget: high-speed config #1: 66bf0c8.android_usb 2093[ 7.129527] c0 67 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500 2094[ 7.130970] c0 42 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 2095[ 7.131075] c0 42 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1 2096[ 7.131082] c0 42 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1 2097[ 7.132157] c2 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2098[ 7.133739] c2 582 healthd: battery l=100 v=4264 t=31.5 h=2 st=5 c=698 chg=a 2099[ 7.183499] c0 42 android_work: android_work: sent uevent USB_STATE=CONFIGURED 2100[ 7.246768] c2 24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 3000 2101[ 7.246824] c2 24 SMBCHG: smbchg_is_parallel_usb_ok: FCC 1400 lower than 2400 2102[ 7.246830] c2 24 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1) 2103[ 7.543191] c0 507 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3 2104[ 7.553133] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22 2105[ 7.553342] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22 2106[ 7.553919] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 2107[ 7.553965] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385 2108[ 7.554457] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 2109[ 7.554575] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385 2110[ 7.555146] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22 2111[ 7.555631] c0 507 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22 2112[ 7.555946] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 2113[ 7.555956] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101 2114[ 7.556320] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting 2115[ 7.556333] c0 507 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101 2116[ 7.559888] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2117[ 7.561565] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2118[ 7.562436] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2119[ 7.562854] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2120[ 7.565248] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2121[ 7.565768] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2122[ 7.567489] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2123[ 7.568910] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2124[ 7.570543] c0 507 msm_pcm_volume_ctl_get substream runtime not found 2125[ 7.570991] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2126[ 7.572354] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2127[ 7.573825] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2128[ 7.575185] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2129[ 7.576482] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2130[ 7.578782] c0 507 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive 2131[ 7.597116] c0 507 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state 2132[ 7.597141] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0 2133[ 7.597149] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1 2134[ 7.597156] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2 2135[ 7.597163] c0 507 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3 2136[ 7.599622] c0 507 tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1 2137[ 7.750077] c2 24 SMBCHG: smbchg_parallel_usb_en_work: AICL at 3000 2138[ 7.750117] c2 24 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping 2139[ 7.775904] c0 635 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0 2140[ 7.775924] c0 635 ->handle_irq(): ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148 2141[ 7.775943] c0 635 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8 2142[ 7.775957] c0 635 ->action(): (null) 2143[ 7.775963] c0 635 IRQ_NOPROBE set 2144[ 7.775968] c0 635 IRQ_NOREQUEST set 2145[ 7.775973] c0 635 IRQ_NOTHREAD set 2146[ 7.776319] c0 637 irq 354, desc: ffffffc0f93fae00, depth: 0, count: 0, unhandled: 0 2147[ 7.776335] c0 637 ->handle_irq(): ffffffc00032ced0, msm_gpio_irq_handler+0x0/0x148 2148[ 7.776351] c0 637 ->irq_data.chip(): ffffffc001570d28, gic_chip+0x0/0xe8 2149[ 7.776363] c0 637 ->action(): (null) 2150[ 7.776368] c0 637 IRQ_NOPROBE set 2151[ 7.776373] c0 637 IRQ_NOREQUEST set 2152[ 7.776377] c0 637 IRQ_NOTHREAD set 2153[ 7.846955] c0 563 tfa98xx_spk_event(): event 2 2154[ 7.876911] c2 268 sps: BAM device 0x0000000007584000 is not registered yet. 2155[ 7.877108] c2 268 sps:BAM 0x0000000007584000 is registered. 2156[ 7.877430] c3 268 sps:BAM 0x0000000007584000 (va:0xffffff80059c0000) enabled: ver:0x19, number of pipes:24 2157[ 7.890450] c2 442 type=1400 audit(1505257743.422:40): avc: denied { read } for pid=847 comm="BootAnimation::" name="system" dev="sda35" ino=2670593 scontext=u:r:bootanim:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=0 2158[ 7.955103] c3 637 msm_pm_qos_add_request: add request 2159[ 7.958640] c3 1 init: Service 'flash-nanohub-fw' (pid 458) exited with status 0 2160[ 7.965164] c3 637 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx378 2161[ 7.981655] c2 637 msm_cci_init:1385: hw_version = 0x10040000 2162[ 7.982991] c2 637 imx378_htc probe succeeded 2163[ 7.989950] c0 596 pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset 2164[ 8.012943] c3 637 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx179 2165[ 8.026592] c1 637 msm_cci_init:1385: hw_version = 0x10040000 2166[ 8.026962] c1 637 imx179_htc probe succeeded 2167[ 8.043535] c3 637 msm_csid_init: CSID_VERSION = 0x30050000 2168[ 8.044008] c0 636 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 2169[ 8.045458] c3 637 msm_csid_init: CSID_VERSION = 0x30050000 2170[ 8.045909] c0 0 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800 2171[ 8.059609] c2 637 msm_cci_init:1385: hw_version = 0x10040000 2172[ 8.085844] c0 0 pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up 2173[ 8.085938] c0 339 pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received 2174[ 8.093083] c0 301 msm_thermal:hotplug_notify tsens_tz_sensor11 reach temp threshold: 648 2175[ 8.095017] c1 339 M-Notify: General: 7 2176[ 8.095051] c1 596 IPA received MPSS AFTER_POWERUP 2177[ 8.095057] c1 596 IPA AFTER_POWERUP handling is complete 2178[ 8.174404] c0 52 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service 2179[ 8.355884] c3 637 msm_cci_init:1385: hw_version = 0x10040000 2180[ 8.356637] c0 469 apr_tal:Modem Is Up 2181[ 8.359552] c2 869 diag: In socket_open_client, socket not initialized for MODEM_CMD 2182[ 8.359638] c2 869 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000 2183[ 8.360854] c1 442 type=1400 audit(1505257743.889:41): avc: denied { create } for pid=869 comm="kworker/u8:7" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0 2184[ 8.552897] c1 869 Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 2185[ 8.554410] c1 518 ipa-wan handle_indication_req:133 not send indication 2186[ 8.554621] c3 869 QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received 2187[ 8.554760] c1 518 ipa ipa_uc_response_hdlr:461 IPA uC loaded 2188[ 8.554827] c1 518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2189[ 8.557320] c1 518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2190[ 8.558712] c0 518 ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130 2191[ 8.558755] c0 518 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2192[ 8.867366] c3 637 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000 2193[ 8.867380] c3 637 MSM-CPP cpp_init_hardware:881 stream_cnt:0 2194[ 8.867642] c2 442 type=1400 audit(1505257744.399:42): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2195[ 8.867742] c2 442 type=1400 audit(1505257744.399:43): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2196[ 8.867790] c2 442 type=1400 audit(1505257744.399:44): avc: denied { search } for pid=637 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2197[ 9.332336] c0 563 tfa98xx_spk_event(): event 4 2198[ 9.355091] c0 637 msm_pm_qos_update_request: update request 100 2199[ 9.355114] c0 637 msm_pm_qos_update_request: update request -1<6>[ 9.359829] c0 1047 msm_csid_init: CSID_VERSION = 0x30050000 2200[ 9.360977] c0 1047 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 2201[ 9.383164] c0 1047 msm_cci_init:1385: hw_version = 0x10040000 2202[ 9.383316] c0 1064 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000 2203[ 9.383332] c0 1064 MSM-CPP cpp_init_hardware:881 stream_cnt:0 2204[ 9.504749] c3 442 type=1400 audit(1505257745.035:45): avc: denied { search } for pid=1077 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15258 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0 2205[ 9.509224] c1 52 [FLT] qpnp_flash_led_work: brt = 0 2206[ 9.511605] c1 52 SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0 2207[ 9.511623] c1 52 SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2 2208[ 9.524594] c0 637 msm_pm_qos_update_request: update request 100 2209[ 9.524616] c0 637 msm_pm_qos_update_request: update request -1<6>[ 9.527463] c0 1105 msm_csid_init: CSID_VERSION = 0x30050000 2210[ 9.528131] c0 1105 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800 2211[ 9.538049] c0 1116 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000 2212[ 9.538068] c0 1116 MSM-CPP cpp_init_hardware:881 stream_cnt:0 2213[ 9.549114] c0 1105 msm_cci_init:1385: hw_version = 0x10040000 2214[ 9.566028] c0 442 type=1400 audit(1505257745.095:46): avc: denied { search } for pid=1126 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15258 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0 2215[ 9.968525] c0 442 type=1400 audit(1505257745.499:47): avc: granted { net_admin } for pid=1191 comm="lowi-server" capability=12 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability 2216[ 10.014921] c2 442 type=1400 audit(1505257745.545:48): avc: granted { net_raw } for pid=1193 comm="slim_daemon" capability=13 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability 2217[ 10.216463] c1 518 smd_write_segment_avail: non-packet channel specified 2218[ 10.263760] c1 1 init: Starting service 'ims_rtp_daemon'... 2219[ 10.266774] c1 1 init: Starting service 'imscmservice'... 2220[ 10.550277] c2 442 type=1400 audit(1505257746.082:49): avc: denied { read write } for pid=1262 comm="ims_rtp_daemon" name="diag" dev="tmpfs" ino=15154 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2221[ 10.760109] c2 405 [Cable impedance] Incorrect charger type, ignore detection. 2222[ 11.393774] c1 1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2223[ 11.395130] c1 1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2224[ 11.397246] c1 1303 ipa-wan ipa_wwan_ioctl:1525 get AGG size 8192 count 10 2225[ 11.397864] c1 1303 ipa ipa_sps_irq_control_all:937 EP (5) not allocated. 2226[ 11.399368] c1 1303 ipa ipa_assign_policy:2973 get close-by 8192 2227[ 11.399385] c1 1303 ipa ipa_assign_policy:2979 set rx_buff_sz 7680 2228[ 11.399392] c1 1303 ipa ipa_assign_policy:3001 set aggr_limit 6 2229[ 11.411030] c1 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data0) register to IPA 2230[ 11.456111] c3 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data1) register to IPA 2231[ 11.497624] c2 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data2) register to IPA 2232[ 11.544407] c3 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data3) register to IPA 2233[ 11.587826] c1 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data4) register to IPA 2234[ 11.627628] c1 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data5) register to IPA 2235[ 11.670381] c3 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data6) register to IPA 2236[ 11.714898] c1 1303 ipa-wan ipa_wwan_ioctl:1431 dev(rmnet_data7) register to IPA 2237[ 12.549304] c2 0 NOHZ: local_softirq_pending 08 2238[ 12.573608] c0 1494 HTB: quantum of class 10001 is big. Consider r2q change. 2239[ 12.591923] c0 1495 HTB: quantum of class 10010 is big. Consider r2q change. 2240[ 14.090692] c0 0 NOHZ: local_softirq_pending 08 2241[ 15.096146] c0 0 NOHZ: local_softirq_pending 08 2242[ 16.106841] c0 0 NOHZ: local_softirq_pending 08 2243[ 16.465440] c0 1508 input: uinput-folio as /devices/virtual/input/input9 2244[ 16.472970] c2 582 healthd: battery l=100 v=4264 t=31.7 h=2 st=5 c=698 chg=a 2245[ 18.067240] c3 1144 acc_open 2246[ 18.067274] c3 1144 acc_release 2247[ 18.188993] c3 648 QSEECOM: qseecom_load_app: App (fpctzappfingerprint) does'nt exist, loading apps for first time 2248[ 18.820176] c3 648 QSEECOM: qseecom_load_app: App with id 6 (fpctzappfingerprint) now loaded 2249[ 18.837589] c3 648 input: uinput-fpc as /devices/virtual/input/input10 2250[ 19.415720] c0 280 FG: fg_soc_irq_handler: triggered 0x25 2251[ 19.416313] c0 469 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2) 2252[ 19.416341] c0 469 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments 2253[ 19.417759] c0 42 FG: fg_is_batt_id_valid: fg batt sts 0x8 2254[ 19.431322] c0 582 healthd: battery l=100 v=4264 t=31.7 h=2 st=5 c=698 chg=a 2255[ 19.447140] c0 582 healthd: battery l=100 v=4402 t=31.7 h=2 st=5 c=-171 chg=a 2256[ 19.462369] c0 42 SMBCHG: smbchg_vfloat_adjust_work: sample number = 0 vbat_mv = 4402 ibat_ua = -171202 2257[ 19.462394] c0 42 SMBCHG: smbchg_vfloat_adjust_work: Skip 1 samples; max = 4402 2258[ 19.475719] c1 1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts 2259[ 19.476507] c1 1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts 2260[ 19.477468] c1 1563 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts 2261[ 19.478555] c1 1573 FUSE: SHORTCIRCUIT enabled [sdcard : 1573]! 2262[ 19.478611] c1 1572 FUSE: SHORTCIRCUIT enabled [sdcard : 1572]! 2263[ 19.478928] c2 1574 FUSE: SHORTCIRCUIT enabled [sdcard : 1574]! 2264[ 19.693512] c0 42 get_ice_device_from_storage_type: found ice device ffffffc03202a000 2265[ 19.694678] c0 42 get_ice_device_from_storage_type: found ice device ffffffc03202a000 2266[ 19.706348] c0 1211 fwpath_changed_handler : new_mode : sta, present_mode : 2267[ 19.706372] c0 1211 kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 1 caller: fwpath_changed_handler 2268[ 19.706398] c0 1211 wlan: loading driver v4.4.25.029 2269[ 19.743528] c0 1211 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. 2270[ 19.747527] c0 1211 msm_pcie_enable: PCIe RC0 PHY is ready! 2271[ 19.758801] c0 1211 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. 2272[ 19.801318] c1 1211 msm_pcie_enable: PCIe RC0 link initialized 2273[ 19.804424] c1 442 type=1400 audit(1505257755.332:50): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2274[ 19.804695] c1 442 type=1400 audit(1505257755.332:51): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2275[ 19.804797] c1 442 type=1400 audit(1505257755.332:52): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2276[ 19.810189] c1 1211 hif_pci_probe:, con_mode= 0x0 2277[ 19.810207] c1 1211 PCI device id is 003e :003e 2278[ 19.810226] c1 1211 cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit] 2279[ 19.810300] c1 1211 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002) 2280[ 19.811804] c1 1211 2281[ 19.811804] c1 1211 hif_pci_configure : num_desired MSI set to 0 2282[ 19.811887] c1 1211 2283[ 19.811887] c1 1211 Using PCI Legacy Interrupt 2284[ 19.844209] c1 442 type=1400 audit(1505257755.375:53): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2285[ 19.844486] c1 442 type=1400 audit(1505257755.375:54): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2286[ 19.844687] c1 442 type=1400 audit(1505257755.375:55): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2287[ 19.851443] c1 1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4 2288[ 19.851462] c1 1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmNonOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4 2289[ 19.852189] c1 1211 wlan: [1211:E :HDD] hdd_apply_cfg_ini: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255 2290[ 19.854509] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2291[ 19.857928] c1 1211 NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0 2292[ 19.860134] c1 1211 ol_download_firmware: Using 0x1234 for the remainder of init 2293[ 19.860145] c1 1211 ol_transfer_codeswap_struct: failed to get codeswap structure 2294[ 19.862529] c1 442 type=1400 audit(1505257755.392:56): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2295[ 19.862683] c1 442 type=1400 audit(1505257755.392:57): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2296[ 19.862770] c1 442 type=1400 audit(1505257755.392:58): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2297[ 19.886178] c0 1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: otp30.bin size 23985 bytes done! 2298[ 19.887878] c1 442 type=1400 audit(1505257755.415:59): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2299[ 19.888068] c1 442 type=1400 audit(1505257755.415:60): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2300[ 19.888179] c1 442 type=1400 audit(1505257755.415:61): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2301[ 19.894157] c0 1211 Board extended Data download address: 0x0 2302[ 19.900288] c1 1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: bdwlan30.b82 size 8124 bytes done! 2303[ 19.900597] c1 1211 __ol_transfer_bin_file: no Setup file defined 2304[ 19.900961] c1 442 type=1400 audit(1505257755.432:62): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2305[ 19.901113] c1 442 type=1400 audit(1505257755.432:63): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2306[ 19.901205] c1 442 type=1400 audit(1505257755.432:64): avc: denied { search } for pid=1211 comm="Binder:645_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2307[ 19.928047] c3 641 msm_vidc: info: Opening video instance: 0000000000000000, 0 2308[ 19.933146] c3 641 subsys-restart: __subsystem_get(): Changing subsys fw_name to venus 2309[ 19.938205] c0 442 type=1400 audit(1505257755.469:65): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2310[ 19.938464] c0 442 type=1400 audit(1505257755.469:66): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2311[ 19.938660] c0 442 type=1400 audit(1505257755.469:67): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2312[ 19.942404] c3 641 subsys-pil-tz ce0000.qcom,venus: venus: loading from 0x0000000090f00000 to 0x0000000091400000 2313[ 19.963050] c1 442 type=1400 audit(1505257755.492:68): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2314[ 19.963318] c1 442 type=1400 audit(1505257755.492:69): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2315[ 19.963499] c1 442 type=1400 audit(1505257755.492:70): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2316[ 19.975891] c1 442 type=1400 audit(1505257755.505:71): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2317[ 19.976096] c1 442 type=1400 audit(1505257755.505:72): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2318[ 19.976476] c1 442 type=1400 audit(1505257755.505:73): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2319[ 19.992190] c1 442 type=1400 audit(1505257755.522:74): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2320[ 19.992771] c1 442 type=1400 audit(1505257755.522:75): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2321[ 19.993122] c1 442 type=1400 audit(1505257755.522:76): avc: denied { search } for pid=641 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0 2322[ 20.027265] c2 641 subsys-pil-tz ce0000.qcom,venus: venus: Brought out of reset 2323[ 20.061392] c2 1631 msm_vidc: info: Closed video instance: 0000000000000000 2324[ 20.065421] c2 1631 msm_vidc: info: Opening video instance: 0000000000000000, 0 2325[ 20.080253] c1 788 msm_vidc: info: Closed video instance: 0000000000000000 2326[ 20.090163] c1 641 msm_vidc: info: Opening video instance: 0000000000000000, 0 2327[ 20.104834] c2 1705 msm_vidc: info: Closed video instance: 0000000000000000 2328[ 20.109497] c2 788 msm_vidc: info: Opening video instance: 0000000000000000, 0 2329[ 20.117846] c2 788 msm_vidc: info: Closed video instance: 0000000000000000 2330[ 20.122217] c2 1631 msm_vidc: info: Opening video instance: 0000000000000000, 0 2331[ 20.130628] c2 1705 msm_vidc: info: Closed video instance: 0000000000000000 2332[ 20.139990] c2 1631 msm_vidc: info: Opening video instance: 0000000000000000, 1 2333[ 20.158654] c1 641 msm_vidc: info: Closed video instance: 0000000000000000 2334[ 20.165402] c0 1705 msm_vidc: info: Opening video instance: 0000000000000000, 1 2335[ 20.182515] c1 1705 msm_vidc: info: Closed video instance: 0000000000000000 2336[ 20.186859] c2 641 msm_vidc: info: Opening video instance: 0000000000000000, 1 2337[ 20.196636] c2 641 msm_vidc: info: Closed video instance: 0000000000000000 2338[ 20.200856] c2 641 msm_vidc: info: Opening video instance: 0000000000000000, 1 2339[ 20.211759] c2 1631 msm_vidc: info: Closed video instance: 0000000000000000 2340[ 20.216323] c1 641 msm_vidc: info: Opening video instance: 0000000000000000, 1 2341[ 20.227465] c3 1631 msm_vidc: info: Closed video instance: 0000000000000000 2342[ 20.231323] c3 788 msm_vidc: info: Opening video instance: 0000000000000000, 1 2343[ 20.239674] c3 1631 msm_vidc: info: Closed video instance: 0000000000000000 2344[ 20.243784] c3 641 msm_vidc: info: Opening video instance: 0000000000000000, 1 2345[ 20.251662] c2 788 msm_vidc: info: Closed video instance: 0000000000000000 2346[ 20.255367] c2 1705 msm_vidc: info: Opening video instance: 0000000000000000, 1 2347[ 20.269575] c3 641 msm_vidc: info: Closed video instance: 0000000000000000 2348[ 20.273711] c3 1705 msm_vidc: info: Opening video instance: 0000000000000000, 1 2349[ 20.285379] c2 1631 msm_vidc: info: Closed video instance: 0000000000000000 2350[ 20.600274] c1 1211 wlan: [1211:E :VOS] __ol_transfer_bin_file: transferring file: qwlan30.bin size 749040 bytes done! 2351[ 20.600727] c1 1211 +HTCCreate .. HIF :ffffffc04a6f2800 2352[ 20.600782] c1 1211 -HTCCreate (0xffffffc0ee447000) 2353[ 20.600922] c1 1211 wlan: [1211:F :WDA] WMA --> wmi_unified_attach - success 2354[ 20.600953] c1 1211 ol_if_dfs_attach: called; ptr=ffffffc0f51ddc54, radar_info=ffffffc0709ff7c0 2355[ 20.601507] c1 1211 wlan: [1211:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0 2356[ 20.601699] c1 1211 +HWT 2357[ 20.601719] c1 1211 pipe_num:0 pipe_info:0xffffffc04a6f28a0 2358[ 20.601806] c1 1211 pipe_num:3 pipe_info:0xffffffc04a6f2a08 2359[ 20.601832] c1 1211 pipe_num:4 pipe_info:0xffffffc04a6f2a80 2360[ 20.602001] c1 1211 pipe_num:5 pipe_info:0xffffffc04a6f2af8 2361[ 20.613610] c3 1211 Target Ready! : transmit resources : 2 size:1792, MaxMsgsPerHTCBundle = 1 2362[ 20.613632] c3 1211 HTC Service Index : 1 TX : 0x100 : alloc:2 2363[ 20.613641] c3 1211 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready 2364[ 20.613645] c3 1211 -HWT 2365[ 20.613878] c3 1211 is_full_reorder_offloaded? 1 2366[ 20.613885] c3 1211 HTC Service TX : 0x300 : allocation is zero! 2367[ 20.613948] c3 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2368[ 20.614060] c3 1211 HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready 2369[ 20.614065] c3 1211 HTC Service:0x0300 ep:1 TX flow control disabled 2370[ 20.617954] c3 1211 HTT: full reorder offload enabled 2371[ 20.619114] c3 1211 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready 2372[ 20.619124] c3 1211 wlan: [1211:F :WDA] WMA --> wmi_unified_connect_htc_service - success 2373[ 20.619164] c2 1677 wlan: [1677:F :WDA] McThread: WNI_CFG_DNLD_REQ 2374[ 20.619201] c3 1211 HTC using TX credit flow control 2375[ 20.619603] c0 42 __wmi_control_rx: WMI UNIFIED SERVICE READY event 2376[ 20.619685] c0 42 wlan: [42:F :WDA] WMA <-- WMI_SERVICE_READY_EVENTID 2377[ 20.619753] c0 42 wlan: [42:E :WDA] wma_rx_service_ready_event: Firmware build version : 4321000b 2378[ 20.619797] c0 42 wlan: [42:E :WDA] wma_rx_service_ready_event: Board version: 0.1031102 2379[ 20.619899] c0 42 wlan: [42:F :WDA] WMA --> WMI_INIT_CMDID 2380[ 20.635964] c0 42 __wmi_control_rx: WMI UNIFIED READY event 2381[ 20.636052] c0 42 wlan: [42:F :WDA] WMA <-- WMI_READY_EVENTID 2382[ 20.636212] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2383[ 20.636979] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2384[ 20.641606] c3 1211 wlan: [1211:E :SME] csr_init_chan_list: 333: init time country code US 2385[ 20.641651] c3 250 cfg80211: Calling CRDA for country: US 2386[ 20.641740] c0 1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x4d 2387[ 20.641808] c3 250 wlan: [250:F :HDD] pAdapter is null !! 2388[ 20.641866] c3 250 wlan: [250:E :WDA] regdmn_set_dfs_region: dfs_region: 1 2389[ 20.641879] c3 250 cfg80211: Regulatory domain changed to country: US 2390[ 20.641885] c3 250 cfg80211: DFS Master region: FCC 2391[ 20.641891] c3 250 cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) 2392[ 20.641901] c3 250 cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) 2393[ 20.641907] c3 250 cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (N/A) 2394[ 20.641914] c3 250 cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s) 2395[ 20.641920] c3 250 cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s) 2396[ 20.641926] c3 250 cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) 2397[ 20.641931] c3 250 cfg80211: (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A) 2398[ 20.641937] c3 250 cfg80211: (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2399[ 20.641942] c3 250 cfg80211: (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2400[ 20.641948] c3 250 cfg80211: (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A) 2401[ 20.641954] c3 250 cfg80211: (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2402[ 20.641959] c3 250 cfg80211: (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2403[ 20.641962] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2404[ 20.641972] c3 250 cfg80211: (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2405[ 20.641978] c3 250 cfg80211: (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A) 2406[ 20.641983] c3 250 cfg80211: (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2407[ 20.641988] c3 250 cfg80211: (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) 2408[ 20.641994] c3 250 cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) 2409[ 20.642812] c3 1211 wlan: [1211:E :WDA] MCC TX Pause Event Handler register 2410[ 20.642842] c3 1211 wlan: [1211:E :WDA] Target does not support cesium network 2411[ 20.643147] c3 1211 Pkt log is enabled 2412[ 20.643193] c3 1211 wlan: [1211:E :SME] sme_AddChAvoidCallback: Plug in CH AVOID CB 2413[ 20.644504] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2414[ 20.644839] c0 1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = ac:37:43:4c:69:f6 2415[ 20.645080] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2416[ 20.645364] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2417[ 20.645700] c0 42 wlan: [42:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!! 2418[ 20.648945] c0 417 target uses HTT version 3.28; host uses 3.27 2419[ 20.648971] c0 417 *** Warning: host/target HTT versions are different, though compatible! 2420[ 20.654845] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2421[ 20.655018] c0 1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34 2422[ 20.656019] c3 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2423[ 20.656089] c0 1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4c:69:f6 2424[ 20.656172] c0 1677 wlan: [1677:F :WDA] Creating self peer ae:37:43:4c:69:f6, vdev_id 1 2425[ 20.656214] c0 1677 wlan: [1677:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4c:69:f6 vdev_id 1, peer_count - 1 2426[ 20.656350] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2427[ 20.656882] c0 42 wlan: [42:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!! 2428[ 20.667519] c0 1677 wlan: [1677:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34 2429[ 20.667805] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2430[ 20.668476] c2 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2431[ 20.668906] c0 1211 Host SW:4.4.25.029, FW:4.3.2.11, HW:QCA6174_REV3_2 2432[ 20.669475] c0 1674 wlan: [1674:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0 2433[ 20.669670] c0 1211 ol_pktlog_init: pktlogmod_init successfull 2434[ 20.669808] c0 1211 wlan: driver loaded in 963425 2435[ 20.716373] c2 1 init: Starting service 'p2p_supplicant'... 2436[ 20.751064] c1 1677 wlan: [1677:F :WDA] P2P Device: removing self peer ae:37:43:4c:69:f6 2437[ 20.751082] c1 1677 TXRX: ol_txrx_peer_detach:peer ffffffc064d32800 (ae:37:43:4c:69:f6) 2438[ 20.751093] c1 1677 wlan: [1677:E :WDA] wma_remove_peer: Removed peer with addr ae:37:43:4c:69:f6 vdevid 1 peer_count 0 2439[ 20.751719] c0 1787 TXRX: ol_rx_peer_unmap_handler: Remove the ID 63 reference to peer ffffffc064d32800 2440[ 20.751749] c0 1787 TXRX: ol_rx_peer_unmap_handler: Remove the ID 47 reference to peer ffffffc064d32800 2441[ 20.751756] c0 1787 TXRX: Deleting peer ffffffc064d32800 (ae:37:43:4c:69:f6) 2442[ 20.751999] c1 1677 wlan: [1677:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = ae:37:43:4c:69:f6 2443[ 20.752047] c1 1677 wlan: [1677:F :WDA] Creating self peer ae:37:43:4c:69:f6, vdev_id 1 2444[ 20.752071] c1 1677 wlan: [1677:E :WDA] wma_create_peer: Created peer with peer_addr ae:37:43:4c:69:f6 vdev_id 1, peer_count - 1 2445[ 20.757390] c1 1787 IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready 2446[ 21.029013] c2 442 type=1400 audit(1505257756.559:77): avc: denied { read write } for pid=1837 comm="system_server" name="diag" dev="tmpfs" ino=15154 scontext=u:r:system_server:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0 2447[ 21.674694] c1 563 tfa98xx_spk_event(): event 2 2448[ 21.749199] c2 1 init: avc: granted { set } for property=net.lte.ims.data.enabled pid=1854 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service 2449[ 24.369139] c0 1 init: Service 'bootanim' (pid 508) exited with status 0 2450[ 24.540455] c0 1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory 2451[ 24.544788] c0 1 init: Starting service 'exec 11 (/system/bin/bootstat)'... 2452[ 24.584246] c2 1 init: Service 'exec 11 (/system/bin/bootstat)' (pid 2006) exited with status 0 2453[ 24.584579] c2 1 init: Starting service 'exec 12 (/system/bin/bootstat)'... 2454[ 24.599937] c2 1 init: Service 'exec 12 (/system/bin/bootstat)' (pid 2009) exited with status 0 2455[ 24.600579] c2 1 init: Starting service 'exec 13 (/system/bin/bootstat)'... 2456[ 24.615831] c2 1 init: Service 'exec 13 (/system/bin/bootstat)' (pid 2016) exited with status 0 2457[ 24.616047] c2 1 init: Starting service 'exec 14 (/system/bin/bootstat)'... 2458[ 24.627082] c2 1 init: Service 'exec 14 (/system/bin/bootstat)' (pid 2017) exited with status 0 2459[ 25.263156] c2 24 get_ice_device_from_storage_type: found ice device ffffffc03202a000 2460[ 25.264429] c2 24 get_ice_device_from_storage_type: found ice device ffffffc03202a000 2461[ 26.104320] c2 2300 [NFC] pn551_dev_open : major=10, minor=100 2462[ 26.104349] c2 2300 [NFC] pn551_dev_ioctl power off (delay50) 2463[ 26.104364] c2 2300 [NFC] pn551_Disable: gpio=12 set_value=0 2464[ 26.104373] c2 2300 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0 2465[ 26.156733] c2 2300 [NFC] pn551_dev_ioctl pn551_Disable, set is_debug = 0, s_wdcmd_cnt = 0 2466[ 26.166836] c2 2300 [NFC] pn551_dev_ioctl power on (delay50) 2467[ 26.166860] c2 2300 [NFC] pn551_Enable: gpio=12 set_value=1 2468[ 26.166870] c2 2300 [NFC] pn551_Enable: [NFC] gpio=12 check ven_gpio value=1 2469[ 26.220068] c2 2300 [NFC] pn551_dev_ioctl pn551_Enable, set is_debug = 1, s_wdcmd_cnt : 0 2470[ 26.225072] c2 2318 [NFC] pn551_dev_write: start count = 4 2471[ 26.225081] c2 2318 [NFC] pn551_dev_write: writing 4 bytes 2472[ 26.225088] c2 2318 [NFC] pn551_dev_write : [0] = 0x20 2473[ 26.225091] c2 2318 [NFC] pn551_dev_write : [1] = 0x0 2474[ 26.225094] c2 2318 [NFC] pn551_dev_write : [2] = 0x1 2475[ 26.225097] c2 2318 [NFC] pn551_dev_write : [3] = 0x0 2476[ 26.225100] c2 2318 [NFC] pn551_TxData: [addr=28 flag=0 len=4] 2477[ 26.225103] c2 2318 [NFC] pn551_TxData: retry 0 ........ 2478[ 26.225422] c2 2318 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x27 (ok) 2479[ 26.225598] c2 2317 [NFC] pn551_dev_read: start count = 3 2480[ 26.225606] c2 2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0 2481[ 26.225618] c2 2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0 2482[ 26.228252] c2 2318 [NFC] pn551_dev_write done count = 4 2483[ 26.230509] c0 2195 [NFC] pn551_dev_irq_handler: irq=405 2484[ 26.230521] c2 2317 [NFC] pn551_dev_read : wait_event_interruptible done 2485[ 26.230527] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3] 2486[ 26.230532] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2487[ 26.230733] c2 2317 [NFC] pn551_dev_read : [0] = 0x40 2488[ 26.230738] c2 2317 [NFC] pn551_dev_read : [1] = 0x0 2489[ 26.230741] c2 2317 [NFC] pn551_dev_read : [2] = 0x3 2490[ 26.230745] c2 2317 [NFC] pn551_dev_read done count = 3 2491[ 26.230755] c2 2317 [NFC] pn551_dev_read: start count = 3 2492[ 26.230763] c2 2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 1 2493[ 26.230768] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3] 2494[ 26.230771] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2495[ 26.230957] c2 2317 [NFC] pn551_dev_read : [0] = 0x0 2496[ 26.230962] c2 2317 [NFC] pn551_dev_read : [1] = 0x11 2497[ 26.230965] c2 2317 [NFC] pn551_dev_read : [2] = 0x0 2498[ 26.230968] c2 2317 [NFC] pn551_dev_read done count = 3 2499[ 26.231080] c2 2318 [NFC] pn551_dev_write: start count = 3 2500[ 26.231084] c2 2318 [NFC] pn551_dev_write: writing 3 bytes 2501[ 26.231092] c2 2318 [NFC] pn551_dev_write : [0] = 0x20 2502[ 26.231095] c2 2318 [NFC] pn551_dev_write : [1] = 0x1 2503[ 26.231098] c2 2318 [NFC] pn551_dev_write : [2] = 0x0 2504[ 26.231101] c2 2318 [NFC] pn551_TxData: [addr=28 flag=0 len=3] 2505[ 26.231105] c2 2318 [NFC] pn551_TxData: retry 0 ........ 2506[ 26.231175] c2 2317 [NFC] pn551_dev_read: start count = 3 2507[ 26.231184] c2 2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0 2508[ 26.231194] c2 2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0 2509[ 26.231280] c2 2318 [NFC] pn551_dev_write done count = 3 2510[ 26.231542] c2 2317 [NFC] pn551_dev_read : wait_event_interruptible done 2511[ 26.231549] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3] 2512[ 26.231552] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2513[ 26.231745] c2 2317 [NFC] pn551_dev_read : [0] = 0x40 2514[ 26.231749] c2 2317 [NFC] pn551_dev_read : [1] = 0x1 2515[ 26.231752] c2 2317 [NFC] pn551_dev_read : [2] = 0x19 2516[ 26.231755] c2 2317 [NFC] pn551_dev_read done count = 3 2517[ 26.231765] c2 2317 [NFC] pn551_dev_read: start count = 25 2518[ 26.231775] c2 2317 [NFC] pn551_dev_read: reading 25 bytes, irq_gpio = 1 2519[ 26.231783] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=19] 2520[ 26.231788] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2521[ 26.232495] c2 2317 [NFC] pn551_dev_read : [0] = 0x0 2522[ 26.232501] c2 2317 [NFC] pn551_dev_read : [1] = 0x3 2523[ 26.232504] c2 2317 [NFC] pn551_dev_read : [2] = 0x1e 2524[ 26.232507] c2 2317 [NFC] pn551_dev_read : [3] = 0x3 2525[ 26.232509] c2 2317 [NFC] pn551_dev_read : [4] = 0x0 2526[ 26.232512] c2 2317 [NFC] pn551_dev_read : [5] = 0x8 2527[ 26.232514] c2 2317 [NFC] pn551_dev_read : [6] = 0x0 2528[ 26.232517] c2 2317 [NFC] pn551_dev_read : [7] = 0x1 2529[ 26.232519] c2 2317 [NFC] pn551_dev_read : [8] = 0x2 2530[ 26.232522] c2 2317 [NFC] pn551_dev_read : [9] = 0x3 2531[ 26.232525] c2 2317 [NFC] pn551_dev_read : [10] = 0x80 2532[ 26.232529] c2 2317 [NFC] pn551_dev_read : [11] = 0x81 2533[ 26.232531] c2 2317 [NFC] pn551_dev_read : [12] = 0x82 2534[ 26.232534] c2 2317 [NFC] pn551_dev_read : [13] = 0x83 2535[ 26.232536] c2 2317 [NFC] pn551_dev_read : [14] = 0x2 2536[ 26.232539] c2 2317 [NFC] pn551_dev_read : [15] = 0xd0 2537[ 26.232542] c2 2317 [NFC] pn551_dev_read : [16] = 0x2 2538[ 26.232544] c2 2317 [NFC] pn551_dev_read : [17] = 0xff 2539[ 26.232547] c2 2317 [NFC] pn551_dev_read : [18] = 0x2 2540[ 26.232550] c2 2317 [NFC] pn551_dev_read : [19] = 0x0 2541[ 26.232552] c2 2317 [NFC] pn551_dev_read : [20] = 0x4 2542[ 26.232555] c2 2317 [NFC] pn551_dev_read : [21] = 0x98 2543[ 26.232557] c2 2317 [NFC] pn551_dev_read : [22] = 0x10 2544[ 26.232560] c2 2317 [NFC] pn551_dev_read : [23] = 0x5 2545[ 26.232562] c2 2317 [NFC] pn551_dev_read : [24] = 0x2 2546[ 26.232565] c2 2317 [NFC] pn551_dev_read done count = 25 2547[ 26.232673] c2 2318 [NFC] pn551_dev_write: start count = 6 2548[ 26.232677] c2 2318 [NFC] pn551_dev_write: writing 6 bytes 2549[ 26.232684] c2 2318 [NFC] pn551_dev_write : [0] = 0x20 2550[ 26.232687] c2 2318 [NFC] pn551_dev_write : [1] = 0x3 2551[ 26.232689] c2 2318 [NFC] pn551_dev_write : [2] = 0x3 2552[ 26.232692] c2 2318 [NFC] pn551_dev_write : [3] = 0x1 2553[ 26.232694] c2 2318 [NFC] pn551_dev_write : [4] = 0xa0 2554[ 26.232696] c2 2318 [NFC] pn551_dev_write : [5] = 0x5 2555[ 26.232699] c2 2318 [NFC] pn551_TxData: [addr=28 flag=0 len=6] 2556[ 26.232702] c2 2318 [NFC] pn551_TxData: retry 0 ........ 2557[ 26.232777] c2 2317 [NFC] pn551_dev_read: start count = 3 2558[ 26.232789] c2 2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0 2559[ 26.232798] c2 2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0 2560[ 26.232948] c2 2318 [NFC] pn551_dev_write done count = 6 2561[ 26.233602] c2 2317 [NFC] pn551_dev_read : wait_event_interruptible done 2562[ 26.233612] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=3] 2563[ 26.233615] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2564[ 26.233814] c2 2317 [NFC] pn551_dev_read : [0] = 0x40 2565[ 26.233817] c2 2317 [NFC] pn551_dev_read : [1] = 0x3 2566[ 26.233820] c2 2317 [NFC] pn551_dev_read : [2] = 0x6 2567[ 26.233822] c2 2317 [NFC] pn551_dev_read done count = 3 2568[ 26.233830] c2 2317 [NFC] pn551_dev_read: start count = 6 2569[ 26.233836] c2 2317 [NFC] pn551_dev_read: reading 6 bytes, irq_gpio = 1 2570[ 26.233841] c2 2317 [NFC] pn551_RxData: [addr=28 flag=1 len=6] 2571[ 26.233843] c2 2317 [NFC] pn551_RxData: retry 0 ........ 2572[ 26.235198] c2 2317 [NFC] pn551_dev_read : [0] = 0x0 2573[ 26.235204] c2 2317 [NFC] pn551_dev_read : [1] = 0x1 2574[ 26.235207] c2 2317 [NFC] pn551_dev_read : [2] = 0xa0 2575[ 26.235210] c2 2317 [NFC] pn551_dev_read : [3] = 0x5 2576[ 26.235213] c2 2317 [NFC] pn551_dev_read : [4] = 0x1 2577[ 26.235215] c2 2317 [NFC] pn551_dev_read : [5] = 0x0 2578[ 26.235219] c2 2317 [NFC] pn551_dev_read done count = 6 2579[ 26.235982] c2 2317 [NFC] pn551_dev_read: start count = 3 2580[ 26.235997] c2 2317 [NFC] pn551_dev_read: reading 3 bytes, irq_gpio = 0 2581[ 26.236010] c2 2317 [NFC] pn551_dev_read: waiting read-event INT, because irq_gpio = 0 2582[ 26.237240] c2 2318 [NFC] pn551_dev_write: start count = 4