1<6>[ 0.000000] Initializing cgroup subsys cpuset 2<6>[ 0.000000] Initializing cgroup subsys cpu 3<6>[ 0.000000] Initializing cgroup subsys cpuacct 4<5>[ 0.000000] Linux version 3.14.37-x86_64-L1-R517 (dell@build) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed May 3 11:27:40 CST 2017 5<6>[ 0.000000] Command line: console=tty0 shutdown_reason=no_applicable androidboot.bootreason=power_button_pressed androidboot.serialno=Default0string g_ffs.iSerialNumber=Default0string loglevel=5 androidboot.hardware=cht_cr_mrd firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 vga=current i915.modeset=1 drm.vblankoffdelay=1 console=ttyS0,115200n8 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops 6<6>[ 0.000000] e820: BIOS-provided physical RAM map: 7<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable 8<6>[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS 9<6>[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable 10<6>[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved 11<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable 12<6>[ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved 13<6>[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007b011fff] usable 14<6>[ 0.000000] BIOS-e820: [mem 0x000000007b012000-0x000000007b041fff] reserved 15<6>[ 0.000000] BIOS-e820: [mem 0x000000007b042000-0x000000007b06ffff] ACPI data 16<6>[ 0.000000] BIOS-e820: [mem 0x000000007b070000-0x000000007b70ffff] ACPI NVS 17<6>[ 0.000000] BIOS-e820: [mem 0x000000007b710000-0x000000007ba38fff] reserved 18<6>[ 0.000000] BIOS-e820: [mem 0x000000007ba39000-0x000000007bffffff] usable 19<6>[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved 20<6>[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved 21<6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved 22<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved 23<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved 24<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved 25<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved 26<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved 27<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved 28<6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 29<6>[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved 30<6>[ 0.000000] NX (Execute Disable) protection: active 31<6>[ 0.000000] e820: user-defined physical RAM map: 32<6>[ 0.000000] user: [mem 0x0000000000000000-0x000000000008efff] usable 33<6>[ 0.000000] user: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS 34<6>[ 0.000000] user: [mem 0x0000000000090000-0x000000000009dfff] usable 35<6>[ 0.000000] user: [mem 0x000000000009e000-0x000000000009ffff] reserved 36<6>[ 0.000000] user: [mem 0x0000000000100000-0x000000001effffff] usable 37<6>[ 0.000000] user: [mem 0x000000001f000000-0x00000000201fffff] reserved 38<6>[ 0.000000] user: [mem 0x0000000020200000-0x000000005c3fffff] usable 39<6>[ 0.000000] user: [mem 0x000000005c400000-0x000000005c7fffff] reserved 40<6>[ 0.000000] user: [mem 0x000000005c800000-0x000000007b011fff] usable 41<6>[ 0.000000] user: [mem 0x000000007b012000-0x000000007b041fff] reserved 42<6>[ 0.000000] user: [mem 0x000000007b042000-0x000000007b06ffff] ACPI data 43<6>[ 0.000000] user: [mem 0x000000007b070000-0x000000007b70ffff] ACPI NVS 44<6>[ 0.000000] user: [mem 0x000000007b710000-0x000000007ba38fff] reserved 45<6>[ 0.000000] user: [mem 0x000000007ba39000-0x000000007bffffff] usable 46<6>[ 0.000000] user: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved 47<6>[ 0.000000] user: [mem 0x00000000fea00000-0x00000000feafffff] reserved 48<6>[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved 49<6>[ 0.000000] user: [mem 0x00000000fed01000-0x00000000fed01fff] reserved 50<6>[ 0.000000] user: [mem 0x00000000fed03000-0x00000000fed03fff] reserved 51<6>[ 0.000000] user: [mem 0x00000000fed06000-0x00000000fed06fff] reserved 52<6>[ 0.000000] user: [mem 0x00000000fed08000-0x00000000fed09fff] reserved 53<6>[ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved 54<6>[ 0.000000] user: [mem 0x00000000fed80000-0x00000000fedbffff] reserved 55<6>[ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved 56<6>[ 0.000000] user: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved 57<6>[ 0.000000] efi: EFI v2.40 by American Megatrends 58<6>[ 0.000000] efi: ACPI=0x7b04b000 ACPI 2.0=0x7b04b000 SMBIOS=0x7b8d4000 59<6>[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) 60<6>[ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000002000) (0MB) 61<6>[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000002000-0x000000000008f000) (0MB) 62<6>[ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) 63<6>[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009d000) (0MB) 64<6>[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x000000000009d000-0x000000000009e000) (0MB) 65<6>[ 0.000000] efi: mem06: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) 66<6>[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000001e8000) (0MB) 67<6>[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x00000000001e8000-0x0000000001000000) (14MB) 68<6>[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002986000) (25MB) 69<6>[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002986000-0x000000001f000000) (454MB) 70<6>[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x000000001f000000-0x0000000020200000) (18MB) 71<6>[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x000000003fffc000) (509MB) 72<6>[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000003fffc000-0x0000000040000000) (0MB) 73<6>[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040000000-0x0000000072000000) (800MB) 74<6>[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000072000000-0x0000000072020000) (0MB) 75<6>[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000072020000-0x0000000074e48000) (46MB) 76<6>[ 0.000000] efi: mem17: type=1, attr=0xf, range=[0x0000000074e48000-0x0000000075a8d000) (12MB) 77<6>[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000075a8d000-0x0000000075dd1000) (3MB) 78<6>[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000075dd1000-0x0000000076681000) (8MB) 79<6>[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000076681000-0x00000000766e9000) (0MB) 80<6>[ 0.000000] efi: mem21: type=2, attr=0xf, range=[0x00000000766e9000-0x00000000766eb000) (0MB) 81<6>[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000766eb000-0x0000000077c16000) (21MB) 82<6>[ 0.000000] efi: mem23: type=1, attr=0xf, range=[0x0000000077c16000-0x0000000077c26000) (0MB) 83<6>[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x0000000077c26000-0x000000007aa12000) (45MB) 84<6>[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x000000007aa12000-0x000000007ad70000) (3MB) 85<6>[ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x000000007ad70000-0x000000007b012000) (2MB) 86<6>[ 0.000000] efi: mem27: type=0, attr=0xf, range=[0x000000007b012000-0x000000007b042000) (0MB) 87<6>[ 0.000000] efi: mem28: type=9, attr=0xf, range=[0x000000007b042000-0x000000007b070000) (0MB) 88<6>[ 0.000000] efi: mem29: type=10, attr=0xf, range=[0x000000007b070000-0x000000007b710000) (6MB) 89<6>[ 0.000000] efi: mem30: type=6, attr=0x800000000000000f, range=[0x000000007b710000-0x000000007b9d4000) (2MB) 90<6>[ 0.000000] efi: mem31: type=5, attr=0x800000000000000f, range=[0x000000007b9d4000-0x000000007ba39000) (0MB) 91<6>[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000007ba39000-0x000000007c000000) (5MB) 92<6>[ 0.000000] efi: mem33: type=12, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000e4000000) (64MB) 93<6>[ 0.000000] efi: mem34: type=11, attr=0x8000000000000001, range=[0x00000000fea00000-0x00000000feb00000) (1MB) 94<6>[ 0.000000] efi: mem35: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB) 95<6>[ 0.000000] efi: mem36: type=11, attr=0x8000000000000001, range=[0x00000000fed01000-0x00000000fed02000) (0MB) 96<6>[ 0.000000] efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000fed03000-0x00000000fed04000) (0MB) 97<6>[ 0.000000] efi: mem38: type=11, attr=0x8000000000000001, range=[0x00000000fed06000-0x00000000fed07000) (0MB) 98<6>[ 0.000000] efi: mem39: type=11, attr=0x8000000000000001, range=[0x00000000fed08000-0x00000000fed0a000) (0MB) 99<6>[ 0.000000] efi: mem40: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed1d000) (0MB) 100<6>[ 0.000000] efi: mem41: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fedc0000) (0MB) 101<6>[ 0.000000] efi: mem42: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB) 102<6>[ 0.000000] efi: mem43: type=11, attr=0x8000000000000001, range=[0x00000000ffb80000-0x0000000100000000) (4MB) 103<6>[ 0.000000] SMBIOS 3.0 present. 104<7>[ 0.000000] DMI: cube i1-TFD/Cherry Trail CR, BIOS 5.11 06/26/2017 105<7>[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved 106<7>[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable 107<6>[ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000 108<7>[ 0.000000] MTRR default type: uncachable 109<7>[ 0.000000] MTRR fixed ranges enabled: 110<7>[ 0.000000] 00000-9FFFF write-back 111<7>[ 0.000000] A0000-FFFFF write-protect 112<7>[ 0.000000] MTRR variable ranges enabled: 113<7>[ 0.000000] 0 base 000000000 mask F80000000 write-back 114<7>[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable 115<7>[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable 116<7>[ 0.000000] 3 base 07C800000 mask FFF800000 uncachable 117<7>[ 0.000000] 4 base 07C400000 mask FFFC00000 uncachable 118<7>[ 0.000000] 5 disabled 119<7>[ 0.000000] 6 disabled 120<7>[ 0.000000] 7 disabled 121<6>[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 122<7>[ 0.000000] original variable MTRRs 123<7>[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB 124<7>[ 0.000000] reg 1, base: 2016MB, range: 32MB, type UC 125<7>[ 0.000000] reg 2, base: 2000MB, range: 16MB, type UC 126<7>[ 0.000000] reg 3, base: 1992MB, range: 8MB, type UC 127<7>[ 0.000000] reg 4, base: 1988MB, range: 4MB, type UC 128<6>[ 0.000000] total RAM covered: 1988M 129<6>[ 0.000000] Found optimal setting for mtrr clean up 130<6>[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G 131<7>[ 0.000000] New variable MTRRs 132<7>[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB 133<7>[ 0.000000] reg 1, base: 1988MB, range: 4MB, type UC 134<7>[ 0.000000] reg 2, base: 1992MB, range: 8MB, type UC 135<7>[ 0.000000] reg 3, base: 2000MB, range: 16MB, type UC 136<7>[ 0.000000] reg 4, base: 2016MB, range: 32MB, type UC 137<6>[ 0.000000] Scanning 1 areas for low memory corruption 138<7>[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672 139<6>[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] 140<7>[ 0.000000] [mem 0x00000000-0x000fffff] page 4k 141<7>[ 0.000000] BRK [0x02692000, 0x02692fff] PGTABLE 142<7>[ 0.000000] BRK [0x02693000, 0x02693fff] PGTABLE 143<7>[ 0.000000] BRK [0x02694000, 0x02694fff] PGTABLE 144<6>[ 0.000000] init_memory_mapping: [mem 0x76400000-0x765fffff] 145<7>[ 0.000000] [mem 0x76400000-0x765fffff] page 2M 146<7>[ 0.000000] BRK [0x02695000, 0x02695fff] PGTABLE 147<6>[ 0.000000] init_memory_mapping: [mem 0x74000000-0x763fffff] 148<7>[ 0.000000] [mem 0x74000000-0x763fffff] page 2M 149<6>[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff] 150<7>[ 0.000000] [mem 0x00100000-0x001fffff] page 4k 151<7>[ 0.000000] [mem 0x00200000-0x1effffff] page 2M 152<6>[ 0.000000] init_memory_mapping: [mem 0x20200000-0x5c3fffff] 153<7>[ 0.000000] [mem 0x20200000-0x5c3fffff] page 2M 154<6>[ 0.000000] init_memory_mapping: [mem 0x5c800000-0x73ffffff] 155<7>[ 0.000000] [mem 0x5c800000-0x73ffffff] page 2M 156<6>[ 0.000000] init_memory_mapping: [mem 0x76600000-0x7b011fff] 157<7>[ 0.000000] [mem 0x76600000-0x7affffff] page 2M 158<7>[ 0.000000] [mem 0x7b000000-0x7b011fff] page 4k 159<7>[ 0.000000] BRK [0x02696000, 0x02696fff] PGTABLE 160<6>[ 0.000000] init_memory_mapping: [mem 0x7ba39000-0x7bffffff] 161<7>[ 0.000000] [mem 0x7ba39000-0x7bbfffff] page 4k 162<7>[ 0.000000] [mem 0x7bc00000-0x7bffffff] page 2M 163<7>[ 0.000000] BRK [0x02697000, 0x02697fff] PGTABLE 164<6>[ 0.000000] RAMDISK: [mem 0x00100000-0x001e7fff] 165<7>[ 0.000000] ACPI: RSDP 000000007b04b000 000024 (v02 ALASKA) 166<7>[ 0.000000] ACPI: XSDT 000000007b04b108 000194 (v01 ALASKA A M I 01072009 AMI 00010013) 167<7>[ 0.000000] ACPI: FACP 000000007b0684b8 00010C (v05 ALASKA A M I 01072009 AMI 00010013) 168<7>[ 0.000000] ACPI: DSDT 000000007b04b330 01D184 (v02 ALASKA A M I 01072009 INTL 20120913) 169<7>[ 0.000000] ACPI: FACS 000000007b70ff80 000040 170<7>[ 0.000000] ACPI: APIC 000000007b0685c8 000084 (v03 ALASKA A M I 01072009 AMI 00010013) 171<7>[ 0.000000] ACPI: FPDT 000000007b068650 000044 (v01 ALASKA A M I 01072009 AMI 00010013) 172<7>[ 0.000000] ACPI: FIDT 000000007b068698 00009C (v01 ALASKA A M I 01072009 AMI 00010013) 173<7>[ 0.000000] ACPI: MSDM 000000007b068738 000055 (v03 ALASKA A M I 01072009 AMI 00010013) 174<7>[ 0.000000] ACPI: MCFG 000000007b068790 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) 175<7>[ 0.000000] ACPI: SSDT 000000007b0687d0 0041C6 (v01 DptfTb DptfTab 00001000 INTL 20120913) 176<7>[ 0.000000] ACPI: SSDT 000000007b06c998 00062B (v01 CpuDpf CpuDptf 00001000 INTL 20120913) 177<7>[ 0.000000] ACPI: SSDT 000000007b06cfc8 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913) 178<7>[ 0.000000] ACPI: UEFI 000000007b06d020 000042 (v01 ALASKA A M I 00000000 00000000) 179<7>[ 0.000000] ACPI: SSDT 000000007b06d068 000269 (v01 UsbCTb UsbCTab 00001000 INTL 20120913) 180<7>[ 0.000000] ACPI: HPET 000000007b06d2d8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) 181<7>[ 0.000000] ACPI: SSDT 000000007b06d310 000763 (v01 PmRef CpuPm 00003000 INTL 20120913) 182<7>[ 0.000000] ACPI: SSDT 000000007b06da78 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120913) 183<7>[ 0.000000] ACPI: SSDT 000000007b06dd08 00017A (v01 PmRef ApTst 00003000 INTL 20120913) 184<7>[ 0.000000] ACPI: SSDT 000000007b06de88 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913) 185<7>[ 0.000000] ACPI: TPM2 000000007b06e2c8 000034 (v03 00000000 00000000) 186<7>[ 0.000000] ACPI: LPIT 000000007b06e300 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D) 187<7>[ 0.000000] ACPI: BCFG 000000007b06e408 000139 (v01 INTEL BATTCONF 00000001 ACPI 00000000) 188<7>[ 0.000000] ACPI: PRAM 000000007b06e548 000030 (v01 00000001 00000000) 189<7>[ 0.000000] ACPI: CSRT 000000007b06e578 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D) 190<7>[ 0.000000] ACPI: BGRT 000000007b06e6c8 000038 (v01 ALASKA A M I 01072009 AMI 00010013) 191<7>[ 0.000000] ACPI: BCFG 000000007b06e700 000139 (v01 INTEL BATTCONF 00000001 ACPI 00000000) 192<7>[ 0.000000] ACPI: OEM0 000000007b06e840 000084 (v05 INTEL BATTERY 00000005 ACPI 00000000) 193<7>[ 0.000000] ACPI: OEM1 000000007b06e8c8 000040 (v01 INTEL ENRGYMGT 00000005 ACPI 0100000D) 194<7>[ 0.000000] ACPI: PIDV 000000007b06e908 0000DC (v02 00000002 00000000) 195<7>[ 0.000000] ACPI: RSCI 000000007b06e9e8 00002C (v01 INTEL BOOTSRC 00000000 00000000) 196<7>[ 0.000000] ACPI: WDAT 000000007b06ea18 000104 (v01 00000000 00000000) 197<7>[ 0.000000] ACPI: BCFG 000000007b06eb20 000139 (v01 INTEL BATTCONF 00000001 ACPI 00000000) 198<7>[ 0.000000] ACPI: OEM0 000000007b06ec60 000084 (v05 INTEL BATTERY 00000005 ACPI 00000000) 199<7>[ 0.000000] ACPI: OEM1 000000007b06ece8 000040 (v01 INTEL ENRGYMGT 00000005 ACPI 0100000D) 200<7>[ 0.000000] ACPI: PIDV 000000007b06ed28 0000DC (v02 00000002 00000000) 201<7>[ 0.000000] ACPI: RSCI 000000007b06ee08 00002C (v01 INTEL BOOTSRC 00000000 00000000) 202<7>[ 0.000000] ACPI: WDAT 000000007b06ee38 000104 (v01 00000000 00000000) 203<7>[ 0.000000] ACPI: BCFG 000000007b06ef40 000139 (v01 INTEL BATTCONF 00000001 ACPI 00000000) 204<7>[ 0.000000] ACPI: OEM0 000000007b06f080 000084 (v05 INTEL BATTERY 00000005 ACPI 00000000) 205<7>[ 0.000000] ACPI: OEM1 000000007b06f108 000040 (v01 INTEL ENRGYMGT 00000005 ACPI 0100000D) 206<7>[ 0.000000] ACPI: PIDV 000000007b06f148 0000DC (v02 00000002 00000000) 207<7>[ 0.000000] ACPI: RSCI 000000007b06f228 00002C (v01 INTEL BOOTSRC 00000000 00000000) 208<7>[ 0.000000] ACPI: WDAT 000000007b06f258 000104 (v01 00000000 00000000) 209<7>[ 0.000000] ACPI: BCFG 000000007b06f360 000139 (v01 INTEL BATTCONF 00000001 ACPI 00000000) 210<7>[ 0.000000] ACPI: OEM0 000000007b06f4a0 000084 (v05 INTEL BATTERY 00000005 ACPI 00000000) 211<7>[ 0.000000] ACPI: OEM1 000000007b06f528 000040 (v01 INTEL ENRGYMGT 00000005 ACPI 0100000D) 212<7>[ 0.000000] ACPI: PIDV 000000007b06f568 0000DC (v02 00000002 00000000) 213<7>[ 0.000000] ACPI: RSCI 000000007b06f648 00002C (v01 INTEL BOOTSRC 00000000 00000000) 214<7>[ 0.000000] ACPI: WDAT 000000007b06f678 000104 (v01 00000000 00000000) 215<7>[ 0.000000] ACPI: Local APIC address 0xfee00000 216<7>[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880073e00000-ffff880075dfffff] on node 0 217<7>[ 0.000000] Zone ranges: 218<7>[ 0.000000] DMA [mem 0x00001000-0x00ffffff] 219<7>[ 0.000000] DMA32 [mem 0x01000000-0xffffffff] 220<7>[ 0.000000] Normal empty 221<7>[ 0.000000] Movable zone start for each node 222<7>[ 0.000000] Early memory node ranges 223<7>[ 0.000000] node 0: [mem 0x00001000-0x0008efff] 224<7>[ 0.000000] node 0: [mem 0x00090000-0x0009dfff] 225<7>[ 0.000000] node 0: [mem 0x00100000-0x1effffff] 226<7>[ 0.000000] node 0: [mem 0x20200000-0x5c3fffff] 227<7>[ 0.000000] node 0: [mem 0x5c800000-0x7b011fff] 228<7>[ 0.000000] node 0: [mem 0x7ba39000-0x7bffffff] 229<7>[ 0.000000] On node 0 totalpages: 499573 230<7>[ 0.000000] DMA zone: 64 pages used for memmap 231<7>[ 0.000000] DMA zone: 254 pages reserved 232<7>[ 0.000000] DMA zone: 3996 pages, LIFO batch:0 233<7>[ 0.000000] DMA32 zone: 7872 pages used for memmap 234<7>[ 0.000000] DMA32 zone: 495577 pages, LIFO batch:31 235<6>[ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable 236<6>[ 0.000000] Reserving Intel graphics stolen memory at 0x7ce00000-0x7edfffff 237<6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408 238<7>[ 0.000000] ACPI: Local APIC address 0xfee00000 239<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) 240<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) 241<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) 242<6>[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) 243<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 244<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) 245<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) 246<6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) 247<6>[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) 248<6>[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114 249<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 250<6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 251<7>[ 0.000000] ACPI: IRQ0 used by override. 252<7>[ 0.000000] ACPI: IRQ2 used by override. 253<7>[ 0.000000] ACPI: IRQ9 used by override. 254<6>[ 0.000000] Using ACPI (MADT) for SMP configuration information 255<6>[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 256<6>[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs 257<7>[ 0.000000] nr_irqs_gsi: 131 258<6>[ 0.000000] e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices 259<6>[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 260<6>[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880076400000 s76032 r8192 d22272 u524288 261<7>[ 0.000000] pcpu-alloc: s76032 r8192 d22272 u524288 alloc=1*2097152 262<7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 263<7>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 491383 264<5>[ 0.000000] Kernel command line: console=tty0 shutdown_reason=no_applicable androidboot.bootreason=power_button_pressed androidboot.serialno=Default0string g_ffs.iSerialNumber=Default0string loglevel=5 androidboot.hardware=cht_cr_mrd firmware_class.path=/system/etc/firmware i915.fastboot=1 memmap=4M$0x5c400000 vga=current i915.modeset=1 drm.vblankoffdelay=1 console=ttyS0,115200n8 bootboost=1 pm_suspend_debug=1 pstore.backend=ramoops 265<6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 266<6>[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) 267<6>[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) 268<7>[ 0.000000] Memory: 1860332K/1998292K available (10266K kernel code, 2146K rwdata, 5988K rodata, 1248K init, 1248K bss, 137960K reserved) 269<6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 270<6>[ 0.000000] Preemptible hierarchical RCU implementation. 271<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. 272<6>[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16 273<6>[ 0.000000] console [ttyS0] enabled 274<6>[ 0.000000] allocated 8388608 bytes of page_cgroup 275<6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups 276<6>[ 0.000000] tsc: Fast TSC calibration failed 277<6>[ 0.000000] tsc: PIT calibration matches PMTIMER. 1 loops 278<6>[ 0.000000] tsc: Detected 1439.961 MHz processor 279<6>[ 0.000053] Calibrating delay loop (skipped), value calculated using timer frequency.. 2879.92 BogoMIPS (lpj=1439961) 280<6>[ 0.000062] pid_max: default: 32768 minimum: 301 281<6>[ 0.000098] ACPI: Core revision 20131218 282<7>[ 0.051039] ACPI: All ACPI Tables successfully acquired 283<6>[ 0.052359] Security Framework initialized 284<6>[ 0.052377] SELinux: Initializing. 285<7>[ 0.052390] SELinux: Starting in permissive mode 286<6>[ 0.052422] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) 287<6>[ 0.052427] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) 288<6>[ 0.052894] Initializing cgroup subsys memory 289<6>[ 0.052909] Initializing cgroup subsys freezer 290<6>[ 0.052954] CPU: Physical Processor ID: 0 291<6>[ 0.052958] CPU: Processor Core ID: 0 292<4>[ 0.052966] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' 293<4>[ 0.052966] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) 294<6>[ 0.073113] mce: CPU supports 6 MCE banks 295<6>[ 0.073128] CPU0: Thermal monitoring enabled (TM1) 296<6>[ 0.073141] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 297<6>[ 0.073141] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0 298<6>[ 0.073141] tlb_flushall_shift: 6 299<6>[ 0.073356] Freeing SMP alternatives memory: 28K (ffffffff82552000 - ffffffff82559000) 300<6>[ 0.079518] ftrace: allocating 36502 entries in 143 pages 301<6>[ 0.111991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 302<6>[ 0.122002] smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz (fam: 06, model: 4c, stepping: 04) 303<7>[ 0.122042] TSC deadline timer enabled 304<6>[ 0.122067] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. 305<6>[ 0.122090] ... version: 3 306<6>[ 0.122093] ... bit width: 40 307<6>[ 0.122096] ... generic registers: 2 308<6>[ 0.122099] ... value mask: 000000ffffffffff 309<6>[ 0.122102] ... max period: 000000ffffffffff 310<6>[ 0.122105] ... fixed-purpose events: 3 311<6>[ 0.122108] ... event mask: 0000000700000003 312<6>[ 0.126111] ftrace: Allocated trace_printk buffers 313<6>[ 0.130822] EM:OEM0 table found, size=132 314<6>[ 0.132543] x86: Booting SMP configuration: 315<6>[ 0.132550] .... node #0, CPUs: #1 #2 #3 316<6>[ 0.187219] Skipped synchronization checks as TSC is reliable. 317<6>[ 0.187289] x86: Booted up 1 node, 4 CPUs 318<6>[ 0.187296] smpboot: Total of 4 processors activated (11519.68 BogoMIPS) 319<6>[ 0.188534] devtmpfs: initialized 320<6>[ 0.189510] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) 321<6>[ 0.189518] PM: Registering ACPI NVS region [mem 0x7b070000-0x7b70ffff] (6946816 bytes) 322<6>[ 0.192830] pinctrl core: initialized pinctrl subsystem 323<6>[ 0.193370] regulator-dummy: no parameters 324<6>[ 0.193528] RTC time: 9:56:28, date: 12/05/17 325<6>[ 0.193647] NET: Registered protocol family 16 326<6>[ 0.195100] cpuidle: using governor ladder 327<6>[ 0.195107] cpuidle: using governor menu 328<6>[ 0.195407] ACPI: bus type PCI registered 329<6>[ 0.195412] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 330<6>[ 0.195933] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) 331<6>[ 0.195943] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 332<6>[ 0.195950] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!) 333<6>[ 0.196137] PCI: Using configuration type 1 for base access 334<6>[ 0.239706] bio: create slab <bio-0> at 0 335<6>[ 0.240601] ACPI: Added _OSI(Module Device) 336<6>[ 0.240608] ACPI: Added _OSI(Processor Device) 337<6>[ 0.240612] ACPI: Added _OSI(3.0 _SCP Extensions) 338<6>[ 0.240615] ACPI: Added _OSI(Processor Aggregator Device) 339<7>[ 0.288226] ACPI: SSDT 000000007b03c618 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20120913) 340<7>[ 0.290829] ACPI: Dynamic OEM Table Load: 341<7>[ 0.290836] ACPI: SSDT (null) 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20120913) 342<7>[ 0.291107] ACPI: SSDT 000000007b03cc18 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) 343<7>[ 0.293678] ACPI: Dynamic OEM Table Load: 344<7>[ 0.293686] ACPI: SSDT (null) 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913) 345<7>[ 0.294354] ACPI: SSDT 000000007b03ee18 00015F (v01 PmRef ApIst 00003000 INTL 20120913) 346<7>[ 0.296995] ACPI: Dynamic OEM Table Load: 347<7>[ 0.297002] ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20120913) 348<7>[ 0.297221] ACPI: SSDT 000000007b03df18 00008D (v01 PmRef ApCst 00003000 INTL 20120913) 349<7>[ 0.299799] ACPI: Dynamic OEM Table Load: 350<7>[ 0.299806] ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20120913) 351<6>[ 0.302663] ACPI: Interpreter enabled 352<7>[ 0.302682] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580) 353<7>[ 0.302696] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580) 354<7>[ 0.302707] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580) 355<6>[ 0.302728] ACPI: (supports S0 S5 S0idle) 356<6>[ 0.302733] ACPI: Using IOAPIC for interrupt routing 357<6>[ 0.303012] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 358<6>[ 0.304036] ACPI: No dock devices found. 359<6>[ 0.305889] ACPI: Power Resource [P06X] (off) 360<6>[ 0.309712] ACPI: Power Resource [ID3C] (on) 361<6>[ 0.315518] ACPI: Power Resource [USBC] (on) 362<6>[ 0.318040] ACPI: Power Resource [WWPR] (off) 363<6>[ 0.320455] ACPI: Power Resource [WWPR] (off) 364<6>[ 0.321519] ACPI: Power Resource [WWPR] (off) 365<6>[ 0.322694] ACPI: Power Resource [WWPR] (off) 366<6>[ 0.323842] ACPI: Power Resource [WWPR] (off) 367<6>[ 0.344659] ACPI: Power Resource [CLK2] (on) 368<6>[ 0.344870] ACPI: Power Resource [CLK4] (on) 369<6>[ 0.345082] ACPI: Power Resource [P28P] (off) 370<6>[ 0.345306] ACPI: Power Resource [P18P] (off) 371<6>[ 0.345515] ACPI: Power Resource [P12P] (off) 372<6>[ 0.345720] ACPI: Power Resource [P16P] (off) 373<6>[ 0.350695] ACPI: \_SB_.PCI0.I2C1.BATC: is added to dep device list. 374<6>[ 0.351368] ACPI: Power Resource [CLK3] (on) 375<6>[ 0.351581] ACPI: Power Resource [CLK4] (on) 376<6>[ 0.352028] ACPI: Power Resource [P18P] (off) 377<6>[ 0.352236] ACPI: Power Resource [P28P] (off) 378<6>[ 0.352504] ACPI: Power Resource [P12P] (off) 379<6>[ 0.362894] ACPI: Power Resource [CLK2] (on) 380<6>[ 0.364730] ACPI: Power Resource [CLK1] (on) 381<6>[ 0.367908] ACPI: Power Resource [CLK0] (on) 382<6>[ 0.368120] ACPI: Power Resource [CLK1] (on) 383<6>[ 0.368856] ACPI: Power Resource [CLK5] (off) 384<6>[ 0.370054] ACPI: Power Resource [P33P] (off) 385<6>[ 0.376483] ACPI: \_SB_.PCI0.I2C7.BATC: is added to dep device list. 386<6>[ 0.389098] ACPI: Power Resource [P28X] (off) 387<6>[ 0.389312] ACPI: Power Resource [P18X] (off) 388<6>[ 0.389586] ACPI: Power Resource [P12X] (off) 389<6>[ 0.389821] ACPI: Power Resource [P19X] (off) 390<6>[ 0.390054] ACPI: Power Resource [P12A] (off) 391<6>[ 0.390265] ACPI: Power Resource [P28T] (off) 392<6>[ 0.390479] ACPI: Power Resource [P18D] (off) 393<6>[ 0.390709] ACPI: Power Resource [P18T] (off) 394<6>[ 0.390911] ACPI: Power Resource [P3P3] (off) 395<6>[ 0.391124] ACPI: Power Resource [P12T] (off) 396<6>[ 0.391330] ACPI: Power Resource [P28W] (off) 397<6>[ 0.391550] ACPI: Power Resource [P18W] (off) 398<6>[ 0.391790] ACPI: Power Resource [P12W] (off) 399<6>[ 0.391995] ACPI: Power Resource [P33W] (off) 400<6>[ 0.392208] ACPI: Power Resource [P33X] (off) 401<6>[ 0.392424] ACPI: Power Resource [P4BW] (off) 402<6>[ 0.406714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) 403<6>[ 0.406734] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] 404<6>[ 0.407323] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] 405<6>[ 0.408182] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge 406<6>[ 0.409028] PCI host bridge to bus 0000:00 407<6>[ 0.409039] pci_bus 0000:00: root bus resource [bus 00-ff] 408<6>[ 0.409045] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] 409<6>[ 0.409050] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] 410<6>[ 0.409055] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] 411<6>[ 0.409061] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] 412<6>[ 0.409066] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] 413<6>[ 0.409071] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] 414<6>[ 0.409076] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff] 415<6>[ 0.409081] pci_bus 0000:00: root bus resource [mem 0x7ce00001-0x7ee00000] 416<6>[ 0.409086] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff] 417<7>[ 0.409104] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000 418<7>[ 0.409633] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000 419<7>[ 0.409674] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit] 420<7>[ 0.409698] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref] 421<7>[ 0.409714] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] 422<7>[ 0.410228] pci 0000:00:03.0: [8086:22b8] type 00 class 0x048000 423<7>[ 0.410255] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x913fffff] 424<7>[ 0.410729] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000 425<7>[ 0.410768] pci 0000:00:0b.0: reg 0x10: [mem 0x91a3d000-0x91a3dfff 64bit] 426<7>[ 0.411313] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330 427<7>[ 0.411358] pci 0000:00:14.0: reg 0x10: [mem 0x91a00000-0x91a0ffff 64bit] 428<7>[ 0.411480] pci 0000:00:14.0: PME# supported from D3hot D3cold 429<6>[ 0.411721] pci 0000:00:14.0: System wakeup disabled by ACPI 430<7>[ 0.411926] pci 0000:00:16.0: [8086:22b7] type 00 class 0x0c03fe 431<7>[ 0.411957] pci 0000:00:16.0: reg 0x10: [mem 0x91400000-0x915fffff] 432<7>[ 0.412071] pci 0000:00:16.0: PME# supported from D0 D3hot 433<7>[ 0.412455] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000 434<7>[ 0.412488] pci 0000:00:1a.0: reg 0x10: [mem 0x91900000-0x919fffff] 435<7>[ 0.412506] pci 0000:00:1a.0: reg 0x14: [mem 0x91800000-0x918fffff] 436<7>[ 0.412629] pci 0000:00:1a.0: PME# supported from D0 D3hot 437<7>[ 0.413222] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400 438<7>[ 0.414936] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold 439<7>[ 0.415581] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100 440<6>[ 0.417133] pci 0000:00:1c.0: PCI bridge to [bus 01] 441<7>[ 0.417418] pci_bus 0000:00: on NUMA node 0 442<6>[ 0.432239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 443<6>[ 0.432430] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 444<6>[ 0.432616] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 445<6>[ 0.432807] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 446<6>[ 0.432982] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 447<6>[ 0.433156] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 448<6>[ 0.433331] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 449<6>[ 0.433505] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. 450<7>[ 0.437242] ACPI: Enabled 1 GPEs in block 00 to 3F 451<6>[ 0.437780] dw_dmac 80862286:00: DesignWare DMA Controller, 8 channels 452<6>[ 0.439200] dw_dmac 808622C0:00: DesignWare DMA Controller, 8 channels 453<6>[ 0.441203] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none 454<6>[ 0.441214] vgaarb: loaded 455<6>[ 0.441218] vgaarb: bridge control possible 0000:00:02.0 456<6>[ 0.441472] pwm-byt-plat 80862288:00: PWM device probed: pwm_num=0, mmio_base=ffffc90000072000 clk_khz=19200 457<6>[ 0.441723] pwm-byt-plat 80862289:00: PWM device probed: pwm_num=1, mmio_base=ffffc90000074000 clk_khz=19200 458<5>[ 0.442446] SCSI subsystem initialized 459<7>[ 0.442807] libata version 3.00 loaded. 460<6>[ 0.449921] ACPI: bus type USB registered 461<6>[ 0.450147] usbcore: registered new interface driver usbfs 462<6>[ 0.450265] usbcore: registered new interface driver hub 463<6>[ 0.450416] usbcore: registered new device driver usb 464<6>[ 0.451112] media: Linux media interface: v0.10 465<6>[ 0.451220] Linux video capture interface: v2.00 466<6>[ 0.451399] pps_core: LinuxPPS API ver. 1 registered 467<6>[ 0.451405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> 468<6>[ 0.451501] PTP clock support registered 469<6>[ 0.452428] Advanced Linux Sound Architecture Driver Initialized. 470<6>[ 0.452435] PCI: Using ACPI for IRQ routing 471<7>[ 0.455175] PCI: pci_cache_line_size set to 64 bytes 472<7>[ 0.455272] Expanded resource reserved due to conflict with PCI Bus 0000:00 473<7>[ 0.455280] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] 474<7>[ 0.455285] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] 475<7>[ 0.455289] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] 476<7>[ 0.455293] e820: reserve RAM buffer [mem 0x5c400000-0x5fffffff] 477<7>[ 0.455297] e820: reserve RAM buffer [mem 0x7b012000-0x7bffffff] 478<6>[ 0.456554] Switched to clocksource refined-jiffies 479<6>[ 0.478343] pnp: PnP ACPI init 480<6>[ 0.478393] ACPI: bus type PNP registered 481<7>[ 0.478803] pnp 00:00: Plug and Play ACPI device, IDs INT0800 (active) 482<6>[ 0.479016] system 00:01: [io 0x0680-0x069f] has been reserved 483<6>[ 0.479024] system 00:01: [io 0x0400-0x047f] has been reserved 484<6>[ 0.479030] system 00:01: [io 0x0500-0x05fe] has been reserved 485<7>[ 0.479039] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) 486<7>[ 0.479359] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) 487<7>[ 0.484048] pnp 00:03: Plug and Play ACPI device, IDs PNP1680 (active) 488<7>[ 0.484472] pnp 00:04: Plug and Play ACPI device, IDs INT33f4 (active) 489<6>[ 0.487199] system 00:05: [mem 0x91a3b000-0x91a3bfff] has been reserved 490<6>[ 0.487208] system 00:05: [mem 0x91a39000-0x91a39fff] has been reserved 491<6>[ 0.487215] system 00:05: [mem 0x91a37000-0x91a37fff] has been reserved 492<6>[ 0.487221] system 00:05: [mem 0x91a26000-0x91a26fff] has been reserved 493<6>[ 0.487227] system 00:05: [mem 0x91a24000-0x91a24fff] has been reserved 494<6>[ 0.487233] system 00:05: [mem 0x91a22000-0x91a22fff] has been reserved 495<6>[ 0.487239] system 00:05: [mem 0x91a20000-0x91a20fff] has been reserved 496<6>[ 0.487245] system 00:05: [mem 0x91a1e000-0x91a1efff] has been reserved 497<6>[ 0.487251] system 00:05: [mem 0x91a1c000-0x91a1cfff] has been reserved 498<6>[ 0.487257] system 00:05: [mem 0x91a1a000-0x91a1afff] has been reserved 499<6>[ 0.487263] system 00:05: [mem 0x91a18000-0x91a18fff] has been reserved 500<6>[ 0.487269] system 00:05: [mem 0x91a35000-0x91a35fff] has been reserved 501<6>[ 0.487275] system 00:05: [mem 0x91a33000-0x91a33fff] has been reserved 502<6>[ 0.487281] system 00:05: [mem 0x91a31000-0x91a31fff] has been reserved 503<6>[ 0.487291] system 00:05: [mem 0x91a2f000-0x91a2ffff] has been reserved 504<6>[ 0.487298] system 00:05: [mem 0x91a2d000-0x91a2dfff] has been reserved 505<6>[ 0.487304] system 00:05: [mem 0x91a2b000-0x91a2bfff] has been reserved 506<6>[ 0.487310] system 00:05: [mem 0x91a29000-0x91a29fff] has been reserved 507<6>[ 0.487316] system 00:05: [mem 0x91a27000-0x91a27fff] has been reserved 508<7>[ 0.487324] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) 509<6>[ 0.487748] system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved 510<6>[ 0.487756] system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved 511<6>[ 0.487763] system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved 512<6>[ 0.487769] system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved 513<6>[ 0.487775] system 00:06: [mem 0xfed06000-0xfed06fff] has been reserved 514<6>[ 0.487780] system 00:06: [mem 0xfed08000-0xfed09fff] has been reserved 515<6>[ 0.487786] system 00:06: [mem 0xfed80000-0xfedbffff] has been reserved 516<6>[ 0.487792] system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved 517<6>[ 0.487798] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved 518<7>[ 0.487806] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) 519<7>[ 0.488329] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) 520<7>[ 0.488593] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) 521<6>[ 0.489310] chv_gpio 00:09: Cherryview GPIO GPO0 probed 522<7>[ 0.489321] chv_gpio 00:09: Plug and Play ACPI device, IDs INT33ff (active) 523<6>[ 0.489973] chv_gpio 00:0a: Cherryview GPIO GPO1 probed 524<7>[ 0.489985] chv_gpio 00:0a: Plug and Play ACPI device, IDs INT33ff (active) 525<6>[ 0.490455] chv_gpio 00:0b: Cherryview GPIO GPO2 probed 526<7>[ 0.490467] chv_gpio 00:0b: Plug and Play ACPI device, IDs INT33ff (active) 527<6>[ 0.491142] chv_gpio 00:0c: Cherryview GPIO GPO3 probed 528<7>[ 0.491154] chv_gpio 00:0c: Plug and Play ACPI device, IDs INT33ff (active) 529<6>[ 0.491812] chv_gpio 00:0d: Cherryview GPIO GPO4 probed 530<7>[ 0.491823] chv_gpio 00:0d: Plug and Play ACPI device, IDs INT33ff (active) 531<7>[ 0.492460] pnp 00:0e: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active) 532<7>[ 0.492672] pnp 00:0f: Plug and Play ACPI device, IDs INT33bd (active) 533<6>[ 0.493892] pnp: PnP ACPI: found 16 devices 534<6>[ 0.493897] ACPI: bus type PNP unregistered 535<6>[ 0.495700] register_psy_notifier 536<6>[ 0.500455] Switched to clocksource acpi_pm 537<6>[ 0.500704] usb_otg_port INT3496:00: cannot request USB USB MUX, skipping it. 538<6>[ 0.501115] usb_otg_port INT3496:00: USB PORT ID: PERIPHERAL 539<6>[ 0.501137] usb_otg_port INT3496:00: driver successfully probed 540<7>[ 0.501481] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 541<7>[ 0.501491] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 542<7>[ 0.501498] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 543<7>[ 0.501511] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 544<7>[ 0.501517] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 545<7>[ 0.501522] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 546<6>[ 0.501546] pci 0000:00:1c.0: BAR 8: assigned [mem 0x91b00000-0x91cfffff] 547<6>[ 0.501562] pci 0000:00:1c.0: BAR 9: assigned [mem 0x91d00000-0x91efffff 64bit pref] 548<6>[ 0.501570] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] 549<6>[ 0.501577] pci 0000:00:1c.0: PCI bridge to [bus 01] 550<6>[ 0.501604] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] 551<6>[ 0.501673] pci 0000:00:1c.0: bridge window [mem 0x91b00000-0x91cfffff] 552<6>[ 0.501721] pci 0000:00:1c.0: bridge window [mem 0x91d00000-0x91efffff 64bit pref] 553<7>[ 0.501812] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] 554<7>[ 0.501817] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] 555<7>[ 0.501822] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] 556<7>[ 0.501827] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] 557<7>[ 0.501832] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] 558<7>[ 0.501837] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] 559<7>[ 0.501842] pci_bus 0000:00: resource 10 [mem 0x20000000-0x201fffff] 560<7>[ 0.501847] pci_bus 0000:00: resource 11 [mem 0x7ce00001-0x7ee00000] 561<7>[ 0.501852] pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff] 562<7>[ 0.501858] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] 563<7>[ 0.501863] pci_bus 0000:01: resource 1 [mem 0x91b00000-0x91cfffff] 564<7>[ 0.501868] pci_bus 0000:01: resource 2 [mem 0x91d00000-0x91efffff 64bit pref] 565<6>[ 0.501960] NET: Registered protocol family 2 566<6>[ 0.502416] TCP established hash table entries: 16384 (order: 5, 131072 bytes) 567<6>[ 0.502520] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) 568<6>[ 0.502634] TCP: Hash tables configured (established 16384 bind 16384) 569<6>[ 0.502708] TCP: reno registered 570<6>[ 0.502715] UDP hash table entries: 1024 (order: 3, 32768 bytes) 571<6>[ 0.502740] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) 572<6>[ 0.502879] NET: Registered protocol family 1 573<7>[ 0.503878] pci 0000:00:02.0: Boot video device 574<7>[ 0.504348] PCI: CLS 64 bytes, default 64 575<6>[ 0.506769] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 576<6>[ 0.506829] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 577<6>[ 0.508320] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 578<6>[ 0.508378] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 579<3>[ 0.509640] i2c i2c-2: Failed to register i2c client KIOX0009:00 at 0x0e (-16) 580<3>[ 0.517755] i2c i2c-2: failed to add I2C device KIOX0009:00 from ACPI 581<6>[ 0.525905] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 582<6>[ 0.525963] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 583<6>[ 0.526628] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 584<6>[ 0.526686] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 585<6>[ 0.527327] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 586<6>[ 0.527383] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 587<6>[ 0.528384] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 588<6>[ 0.528441] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 589<6>[ 0.528609] i2c_designware 808622C1:06: _SEM=1 590<6>[ 0.528615] i2c_designware 808622C1:06: Share controller with PUNIT 591<6>[ 0.531151] Dollar Cove: IC_TYPE 0x51 592<6>[ 0.531336] EM:OEM1 table found, size=64 593<6>[ 0.531344] dc_xpwr_get_acpi_cdata: BCFG table found, size=313 594<3>[ 0.531348] dc_xpwr_get_acpi_cdata: battid and fg_name mismatch!!! 595<6>[ 0.538280] dc_xpwr_get_fg_config_data: Loading default fg config. 596<6>[ 0.579458] intel_soc_pmic_i2c i2c-INT33F4:00: PMIC IRQ Base:456 597<6>[ 0.582398] ACPI: \_SB_.PCI0.I2C1.BATC: Device_STA 0x00 598<6>[ 0.582476] ACPI: \_SB_.PCI0.I2C7.BATC: Device_STA 0x00 599<6>[ 0.582756] Trying to unpack rootfs image as initramfs... 600<6>[ 0.619320] Freeing initrd memory: 928K (ffff880000100000 - ffff8800001e8000) 601<6>[ 0.620388] microcode: CPU0 sig=0x406c4, pf=0x1, revision=0x406 602<6>[ 0.620404] microcode: CPU1 sig=0x406c4, pf=0x1, revision=0x406 603<6>[ 0.620425] microcode: CPU2 sig=0x406c4, pf=0x1, revision=0x406 604<6>[ 0.620468] microcode: CPU3 sig=0x406c4, pf=0x1, revision=0x406 605<6>[ 0.620702] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba 606<6>[ 0.621713] Scanning for low memory corruption every 60 seconds 607<6>[ 0.623133] SSE version of gcm_enc/dec engaged. 608<6>[ 0.624548] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation 609<6>[ 0.624638] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation 610<6>[ 0.624803] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation 611<6>[ 0.625053] AVX instructions are not detected. 612<6>[ 0.625092] atomisp_unregister_acpi_devices(1430): unregister i2c_device: OVTI2680:00! 613<6>[ 0.625092] client->flags is 0x00, client->addr is 0x10, client->irq is -1. 614<6>[ 0.625476] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized 615<6>[ 0.625769] iwlwifi platform init 616<6>[ 0.627222] futex hash table entries: 1024 (order: 4, 65536 bytes) 617<5>[ 0.627264] Initialise system trusted keyring 618<6>[ 0.627308] audit: initializing netlink subsys (disabled) 619<5>[ 0.627355] audit: type=2000 audit(1512467787.599:1): initialized 620<5>[ 0.639737] VFS: Disk quotas dquot_6.5.2 621<7>[ 0.639988] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 622<6>[ 0.642651] squashfs: version 4.0 (2009/01/31) Phillip Lougher 623<6>[ 0.643560] fuse init (API version 7.22) 624<6>[ 0.644163] msgmni has been set to 3786 625<5>[ 0.644467] Key type big_key registered 626<7>[ 0.644473] SELinux: Registering netfilter hooks 627<5>[ 0.647054] Key type asymmetric registered 628<5>[ 0.647062] Asymmetric key parser 'x509' registered 629<6>[ 0.647422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 630<6>[ 0.647453] io scheduler noop registered 631<6>[ 0.647458] io scheduler deadline registered 632<6>[ 0.647674] io scheduler cfq registered (default) 633<3>[ 0.648121] intel_soc_pmic_i2c i2c-INT33F4:00: Failed to translate GPIO to IRQ 634<6>[ 0.660202] pcieport 0000:00:1c.0: enable runtime PM 635<7>[ 0.660715] pcieport 0000:00:1c.0: irq 134 for MSI/MSI-X 636<6>[ 0.662395] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt 637<7>[ 0.662468] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded 638<6>[ 0.662584] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 639<6>[ 0.663032] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ 640<7>[ 0.663316] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded 641<6>[ 0.663453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 642<6>[ 0.663944] simple-framebuffer simple-framebuffer.0: framebuffer at 0x80000000, 0x8cd000 bytes, mapped to 0xffffc90004100000 643<6>[ 0.663953] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1200x1922x32, linelength=4800 644<6>[ 0.664218] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! 645<7>[ 0.664339] intel_idle: MWAIT substates: 0x33000020 646<7>[ 0.664345] intel_idle: v0.4 model 0x4C 647<7>[ 0.664349] intel_idle: lapic_timer_reliable_states 0xffffffff 648<6>[ 0.665346] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 649<6>[ 0.665354] ACPI: Power Button [PWRB] 650<6>[ 0.665747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 651<6>[ 0.665753] ACPI: Power Button [PWRF] 652<6>[ 0.676368] thermal LNXTHERM:00: registered as thermal_zone0 653<6>[ 0.676377] ACPI: Thermal Zone [TZ00] (0 C) 654<6>[ 0.680858] LDO_2: 3300 mV normal 655<3>[ 0.681385] dcovex_regulator dcovex_regulator.9: No dcovex_regulator_info 656<4>[ 0.689021] dcovex_regulator: probe of dcovex_regulator.9 failed with error -22 657<6>[ 0.698466] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 658<6>[ 0.718991] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A 659<6>[ 0.724184] Found a Designware HSU 660<6>[ 0.724455] 8086228A:00: ttyHSU0 at MMIO 0x91a21000 (irq = 39, base_baud = 2764800) is a hsu_port0 661<6>[ 0.725111] Found a Designware HSU 662<6>[ 0.725361] 8086228A:01: ttyHSU1 at MMIO 0x91a1f000 (irq = 40, base_baud = 2764800) is a hsu_port1 663<4>[ 0.727270] hpet: number irqs doesn't agree with number of timers 664<6>[ 0.735200] Non-volatile memory driver v1.3 665<6>[ 0.735241] Linux agpgart interface v0.103 666<6>[ 0.735818] [drm] Initialized drm 1.1.0 20060810 667<6>[ 0.740300] [drm] Memory usable by graphics device = 2048M 668<7>[ 0.740312] checking generic (80000000 8cd000) vs hw (80000000 10000000) 669<6>[ 0.740316] fb: switching to inteldrmfb from simple 670<7>[ 0.745769] i915 0000:00:02.0: irq 135 for MSI/MSI-X 671<6>[ 0.745798] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 672<6>[ 0.745803] [drm] Driver supports precise vblank timestamp query. 673<6>[ 0.748184] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem 674<6>[ 0.750192] [drm] hdmi port 3, ddc_bus 3, hpd_pin 6 675<6>[ 0.791428] [drm] Falling back to bit banging on pin 3 676<3>[ 0.823596] i2c i2c-9: normal 7 bit addr failed 677<6>[ 0.839001] [drm] Falling back to bit banging on pin 3 678<3>[ 0.871168] i2c i2c-9: normal 7 bit addr failed 679<3>[ 0.876281] [drm:intel_hdmi_get_edid] *ERROR* Get_hdmi cant read edid 680<4>[ 0.945685] i915 0000:00:02.0: Direct firmware load failed with error -2 681<4>[ 0.953208] i915 0000:00:02.0: Falling back to user helper 682<6>[ 0.959412] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device 683<6>[ 0.959419] i915 0000:00:02.0: registered panic notifier 684<6>[ 0.961768] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) 685<6>[ 0.964534] acpi device:02: registered as cooling_device4 686<6>[ 0.966171] acpi device:03: registered as cooling_device5 687<6>[ 0.968541] acpi device:04: registered as cooling_device6 688<6>[ 0.970887] acpi device:05: registered as cooling_device7 689<6>[ 0.973473] acpi device:06: registered as cooling_device8 690<6>[ 0.976326] acpi device:07: registered as cooling_device9 691<6>[ 0.979101] acpi device:08: registered as cooling_device10 692<6>[ 0.981271] acpi device:09: registered as cooling_device11 693<6>[ 0.982520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2 694<6>[ 0.983142] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 695<6>[ 0.993692] brd: module loaded 696<6>[ 0.998019] loop: module loaded 697<6>[ 0.998553] zram: Created 1 device(s) ... 698<7>[ 0.999244] mei_txe 0000:00:1a.0: irq 136 for MSI/MSI-X 699<6>[ 1.007212] tun: Universal TUN/TAP device driver, 1.6 700<6>[ 1.007221] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> 701<6>[ 1.007450] PPP generic driver version 2.4.2 702<6>[ 1.007749] PPP BSD Compression module registered 703<6>[ 1.007755] PPP Deflate Compression module registered 704<6>[ 1.007772] PPP MPPE Compression module registered 705<6>[ 1.007777] NET: Registered protocol family 24 706<6>[ 1.007925] usbcore: registered new interface driver catc 707<6>[ 1.008048] usbcore: registered new interface driver kaweth 708<6>[ 1.008054] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver 709<6>[ 1.008175] usbcore: registered new interface driver pegasus 710<6>[ 1.008296] usbcore: registered new interface driver rtl8150 711<6>[ 1.008420] usbcore: registered new interface driver r8152 712<6>[ 1.008563] usbcore: registered new interface driver asix 713<6>[ 1.008698] usbcore: registered new interface driver ax88179_178a 714<6>[ 1.008833] usbcore: registered new interface driver cdc_ether 715<6>[ 1.008964] usbcore: registered new interface driver cdc_eem 716<6>[ 1.009092] usbcore: registered new interface driver dm9601 717<6>[ 1.009239] usbcore: registered new interface driver smsc75xx 718<6>[ 1.009385] usbcore: registered new interface driver smsc95xx 719<6>[ 1.009522] usbcore: registered new interface driver net1080 720<6>[ 1.009651] usbcore: registered new interface driver cdc_subset 721<6>[ 1.009787] usbcore: registered new interface driver zaurus 722<6>[ 1.009929] usbcore: registered new interface driver MOSCHIP usb-ethernet driver 723<6>[ 1.010082] usbcore: registered new interface driver ipheth 724<6>[ 1.010217] usbcore: registered new interface driver sierra_net 725<6>[ 1.010382] usbcore: registered new interface driver cdc_ncm 726<6>[ 1.011152] EM:OEM1 table found, size=64 727<6>[ 1.011158] cht_otg_probe : usb none_compliance mode selected 728<4>[ 1.011353] usb_phy_gen_xceiv.1 supply vcc not found, using dummy regulator 729<6>[ 1.019204] usb_phy_gen_xceiv usb_phy_gen_xceiv.1: No RESET GPIO is available 730<6>[ 1.019210] usb_phy_gen_xceiv usb_phy_gen_xceiv.1: No CS GPIO is available 731<6>[ 1.220912] dwc3 dwc3.0.auto: dwc3_suspend_common 732<6>[ 1.224623] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 733<6>[ 1.224656] ehci-pci: EHCI PCI platform driver 734<6>[ 1.228400] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 735<6>[ 1.228430] uhci_hcd: USB Universal Host Controller Interface driver 736<6>[ 1.229619] xhci_hcd 0000:00:14.0: xHCI Host Controller 737<6>[ 1.230415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 738<7>[ 1.490099] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported 739<7>[ 1.490242] xhci_hcd 0000:00:14.0: irq 137 for MSI/MSI-X 740<6>[ 1.490521] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 741<6>[ 1.490528] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 742<6>[ 1.490535] usb usb1: Product: xHCI Host Controller 743<6>[ 1.490540] usb usb1: Manufacturer: Linux 3.14.37-x86_64-L1-R517 xhci_hcd 744<6>[ 1.490545] usb usb1: SerialNumber: 0000:00:14.0 745<6>[ 1.491729] hub 1-0:1.0: USB hub found 746<6>[ 1.491771] hub 1-0:1.0: 7 ports detected 747<6>[ 1.493745] xhci_hcd 0000:00:14.0: xHCI Host Controller 748<6>[ 1.494152] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 749<6>[ 1.494348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 750<6>[ 1.494355] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 751<6>[ 1.494360] usb usb2: Product: xHCI Host Controller 752<6>[ 1.494366] usb usb2: Manufacturer: Linux 3.14.37-x86_64-L1-R517 xhci_hcd 753<6>[ 1.494370] usb usb2: SerialNumber: 0000:00:14.0 754<6>[ 1.495183] hub 2-0:1.0: USB hub found 755<6>[ 1.495230] hub 2-0:1.0: 6 ports detected 756<6>[ 1.498362] usbcore: registered new interface driver cdc_acm 757<6>[ 1.498368] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 758<6>[ 1.498532] usbcore: registered new interface driver usb-storage 759<6>[ 1.498676] usbcore: registered new interface driver ums-realtek 760<6>[ 1.499005] usbcore: registered new interface driver usbserial 761<6>[ 1.499140] usbcore: registered new interface driver usbserial_generic 762<6>[ 1.499292] usbserial: USB Serial support registered for generic 763<6>[ 1.499425] usbcore: registered new interface driver ark3116 764<6>[ 1.499554] usbserial: USB Serial support registered for ark3116 765<6>[ 1.499691] usbcore: registered new interface driver belkin_sa 766<6>[ 1.499817] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter 767<6>[ 1.499961] usbcore: registered new interface driver ch341 768<6>[ 1.500091] usbserial: USB Serial support registered for ch341-uart 769<6>[ 1.500227] usbcore: registered new interface driver cp210x 770<6>[ 1.500391] usbserial: USB Serial support registered for cp210x 771<6>[ 1.500539] usbcore: registered new interface driver digi_acceleport 772<6>[ 1.500672] usbserial: USB Serial support registered for Digi 2 port USB adapter 773<6>[ 1.500802] usbserial: USB Serial support registered for Digi 4 port USB adapter 774<6>[ 1.500948] usbcore: registered new interface driver f81232 775<6>[ 1.501083] usbserial: USB Serial support registered for f81232 776<6>[ 1.501223] usbcore: registered new interface driver ftdi_sio 777<6>[ 1.501376] usbserial: USB Serial support registered for FTDI USB Serial Device 778<6>[ 1.501555] usbcore: registered new interface driver mct_u232 779<6>[ 1.501688] usbserial: USB Serial support registered for MCT U232 780<6>[ 1.501828] usbcore: registered new interface driver mos7720 781<6>[ 1.501969] usbserial: USB Serial support registered for Moschip 2 port adapter 782<6>[ 1.502119] usbcore: registered new interface driver mos7840 783<6>[ 1.502254] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver 784<6>[ 1.502414] usbcore: registered new interface driver option 785<6>[ 1.502541] usbserial: USB Serial support registered for GSM modem (1-port) 786<6>[ 1.502717] usbcore: registered new interface driver oti6858 787<6>[ 1.502844] usbserial: USB Serial support registered for oti6858 788<6>[ 1.502975] usbcore: registered new interface driver pl2303 789<6>[ 1.503107] usbserial: USB Serial support registered for pl2303 790<6>[ 1.503243] usbcore: registered new interface driver spcp8x5 791<6>[ 1.503398] usbserial: USB Serial support registered for SPCP8x5 792<6>[ 1.503537] usbcore: registered new interface driver ssu100 793<6>[ 1.503674] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver 794<6>[ 1.503822] usbcore: registered new interface driver ti_usb_3410_5052 795<6>[ 1.503955] usbserial: USB Serial support registered for TI USB 3410 1 port adapter 796<6>[ 1.504086] usbserial: USB Serial support registered for TI USB 5052 2 port adapter 797<6>[ 1.504235] usbcore: registered new interface driver whiteheat 798<6>[ 1.504370] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) 799<6>[ 1.504502] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT 800<6>[ 1.504637] usbcore: registered new interface driver keyspan_pda 801<6>[ 1.504770] usbserial: USB Serial support registered for Keyspan PDA 802<6>[ 1.504902] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) 803<6>[ 1.505055] usbcore: registered new interface driver usb_ehset_test 804<6>[ 1.505708] mousedev: PS/2 mouse device common for all mice 805<6>[ 1.506641] ##gsl_platform_init gsl_ts_init:## 806<7>[ 1.506840] Martin Debug: gsl_ts_probe ++ 807<7>[ 1.508165] [tp-gsl] 0xfc = {0x50910000} 808<6>[ 1.594136] wgq[hub_suspend-3520] msg[1] 809<6>[ 1.594166] wgq[xhci_bus_suspend-1171] 810<6>[ 1.597113] wgq[hub_suspend-3520] msg[1] 811<6>[ 1.597294] wgq[xhci_bus_suspend-1171] 812<6>[ 1.622828] tsc: Refined TSC clocksource calibration: 1439.953 MHz 813<6>[ 1.623370] Switched to clocksource tsc 814<7>[ 2.017773] =============gsl_load_fw start============== 815<5>[ 5.122103] random: nonblocking pool is initialized 816<7>[ 5.769391] =============gsl_load_fw end============== 817<6>[ 6.078846] input: GSL_TP as /devices/pci0000:00/808622C1:05/i2c-5/5-0071/input/input3 818<7>[ 6.081976] ## kionix_accel_init 1864 ## 819 820<7>[ 6.082175] ## kionix_accel_probe 1562 ## 821 822<7>[ 6.082180] ## kionix_accel_probe 1567 ## 823 824<6>[ 6.082861] kionix_accel 2-0072: this accelerometer is a KXTJ2-1009. 825<6>[ 6.083175] input: kionix_accel as /devices/pci0000:00/808622C1:02/i2c-2/2-0072/input/input4 826<6>[ 6.083985] kionix_accel 2-0072: running in software polling mode 827<7>[ 6.085811] kionix_accel_probe......sysfs_create_group.....�6Ly... 828<7>[ 6.085830] ## kionix_accel_probe 1774 ## 829 830<7>[ 6.085834] ## kionix_accel_probe 1782 ## 831 832<7>[ 6.086087] ### MyDebug gsl_acpi_probe ... 833<7>[ 6.086091] ### MyDebug ACPI_HANDLE ok 834<7>[ 6.086191] gpio reset resource 0, no 332 835<1>[ 6.139243] I2C_Read I2C Read Fail !!!! 836<3>[ 6.143545] LTR303ALS i2c-LTER0303:00: _check_part_id: Part failure miscompare act:0x86 exp:0xa0 837<6>[ 6.153671] input: ltr303_als as /devices/virtual/input/input5 838<1>[ 6.207521] I2C_Read I2C Read Fail !!!! 839<3>[ 6.211868] LTR303ALS i2c-LTER0303:00: _ltr303_set_bit | 0x80 840<3>[ 6.218310] LTR303ALS i2c-LTER0303:00: ltr303_setup: ALS reset fail... 841<3>[ 6.225627] LTR303ALS i2c-LTER0303:00: ltr303_setup Unable to setup device 842<3>[ 6.233386] LTR303ALS i2c-LTER0303:00: ltr303_probe: Setup Fail... 843<4>[ 6.240504] LTR303ALS: probe of i2c-LTER0303:00 failed with error -5 844<6>[ 6.247816] AKM compass driver: initialize.## BMG_init 1651 ## 845 846<3>[ 6.456485] bmg160 2-0074: I2C xfer error 847<6>[ 6.460976] bmg160 2-0074: read chip id result: 0x0 848<3>[ 6.636627] bmg160 2-0074: I2C xfer error 849<6>[ 6.641117] bmg160 2-0074: read chip id result: 0x0 850<3>[ 6.815373] bmg160 2-0074: I2C xfer error 851<6>[ 6.819862] bmg160 2-0074: read chip id result: 0x0 852<3>[ 6.995401] bmg160 2-0074: I2C xfer error 853<6>[ 6.999892] bmg160 2-0074: read chip id result: 0x0 854<3>[ 7.173563] bmg160 2-0074: I2C xfer error 855<6>[ 7.178046] bmg160 2-0074: read chip id result: 0x0 856<5>[ 7.179054] bmg160 2-0074: Bosch Sensortec Device bmg160 detected 857<3>[ 7.350489] bmg160 2-0074: I2C xfer error 858<3>[ 7.354979] bmg160 2-0074: bw_set fail 859<4>[ 7.359180] bmg160: probe of 2-0074 failed with error -22 860<6>[ 7.365409] AKM compass driver: initialize.## akm_compass_init 2172 ## 861 862<3>[ 7.366750] akm09911 2-0073: akm_i2c_rxdata: transfer failed. 863<4>[ 7.373198] akm09911: probe of 2-0073 failed with error -121 864<6>[ 7.380981] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 865<6>[ 7.381045] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram 866<6>[ 7.381489] i2c /dev entries driver 867<6>[ 7.384914] usbcore: registered new interface driver uvcvideo 868<6>[ 7.384922] USB Video Class driver (1.1.1) 869<6>[ 7.385891] dollar_cove_battery dollar_cove_battery: FG data need to be initialized 870<6>[ 7.385897] dollar_cove_battery dollar_cove_battery: DisableFG during initialization 871<6>[ 7.448542] dollar_cove_battery dollar_cove_battery: reg:33, val:f9 872<6>[ 7.450091] dollar_cove_battery dollar_cove_battery: reg:c0, val:0 873<6>[ 7.451536] dollar_cove_battery dollar_cove_battery: reg:c1, val:0 874<6>[ 7.452980] dollar_cove_battery dollar_cove_battery: reg:c2, val:0 875<6>[ 7.454424] dollar_cove_battery dollar_cove_battery: reg:c3, val:0 876<6>[ 7.455868] dollar_cove_battery dollar_cove_battery: reg:c4, val:0 877<6>[ 7.457312] dollar_cove_battery dollar_cove_battery: reg:c5, val:0 878<6>[ 7.458757] dollar_cove_battery dollar_cove_battery: reg:c6, val:1 879<6>[ 7.460304] dollar_cove_battery dollar_cove_battery: reg:c7, val:2 880<6>[ 7.461748] dollar_cove_battery dollar_cove_battery: reg:c8, val:3 881<6>[ 7.463192] dollar_cove_battery dollar_cove_battery: reg:c9, val:4 882<6>[ 7.464636] dollar_cove_battery dollar_cove_battery: reg:ca, val:6 883<6>[ 7.466080] dollar_cove_battery dollar_cove_battery: reg:cb, val:c 884<6>[ 7.467524] dollar_cove_battery dollar_cove_battery: reg:cc, val:13 885<6>[ 7.468969] dollar_cove_battery dollar_cove_battery: reg:cd, val:1c 886<6>[ 7.470516] dollar_cove_battery dollar_cove_battery: reg:ce, val:27 887<6>[ 7.471959] dollar_cove_battery dollar_cove_battery: reg:cf, val:2b 888<6>[ 7.473405] dollar_cove_battery dollar_cove_battery: reg:d0, val:2f 889<6>[ 7.474849] dollar_cove_battery dollar_cove_battery: reg:d1, val:32 890<6>[ 7.476292] dollar_cove_battery dollar_cove_battery: reg:d2, val:35 891<6>[ 7.477736] dollar_cove_battery dollar_cove_battery: reg:d3, val:3b 892<6>[ 7.479180] dollar_cove_battery dollar_cove_battery: reg:d4, val:40 893<6>[ 7.480624] dollar_cove_battery dollar_cove_battery: reg:d5, val:44 894<6>[ 7.482171] dollar_cove_battery dollar_cove_battery: reg:d6, val:47 895<6>[ 7.483614] dollar_cove_battery dollar_cove_battery: reg:d7, val:4a 896<6>[ 7.485058] dollar_cove_battery dollar_cove_battery: reg:d8, val:4f 897<6>[ 7.486502] dollar_cove_battery dollar_cove_battery: reg:d9, val:52 898<6>[ 7.487946] dollar_cove_battery dollar_cove_battery: reg:da, val:54 899<6>[ 7.489390] dollar_cove_battery dollar_cove_battery: reg:db, val:56 900<6>[ 7.490834] dollar_cove_battery dollar_cove_battery: reg:dc, val:59 901<6>[ 7.492380] dollar_cove_battery dollar_cove_battery: reg:dd, val:5d 902<6>[ 7.493824] dollar_cove_battery dollar_cove_battery: reg:de, val:61 903<6>[ 7.495268] dollar_cove_battery dollar_cove_battery: reg:df, val:64 904<6>[ 7.496711] dollar_cove_battery dollar_cove_battery: reg:b8, val:ea 905<6>[ 7.498154] dollar_cove_battery dollar_cove_battery: reg:e0, val:8a 906<6>[ 7.499598] dollar_cove_battery dollar_cove_battery: reg:e1, val:b6 907<6>[ 7.501042] dollar_cove_battery dollar_cove_battery: reg:ba, val:c0 908<6>[ 7.502589] dollar_cove_battery dollar_cove_battery: reg:bb, val:83 909<3>[ 7.512783] dollar_cove_battery dollar_cove_battery: capacity measurement not valid 910<4>[ 7.529514] thermal thermal_zone1: failed to read out thermal zone 1 911<6>[ 7.541943] dollar_cove_battery dollar_cove_battery: IRQ No:472 912<6>[ 7.546266] dollar_cove_battery dollar_cove_battery: IRQ No:473 913<3>[ 7.552183] dollar_cove_battery dollar_cove_battery: capacity measurement not valid 914<6>[ 7.555030] dollar_cove_battery dollar_cove_battery: IRQ No:474 915<6>[ 7.557885] dollar_cove_battery dollar_cove_battery: IRQ No:475 916<6>[ 7.560856] dollar_cove_battery dollar_cove_battery: IRQ No:480 917<6>[ 7.565184] dollar_cove_battery dollar_cove_battery: IRQ No:481 918<6>[ 7.585601] dollar_cove_charger dollar_cove_charger: IRQ No:460 919<6>[ 7.588592] dollar_cove_charger dollar_cove_charger: IRQ No:466 920<6>[ 7.591483] dollar_cove_charger dollar_cove_charger: IRQ No:467 921<6>[ 7.594384] dollar_cove_charger dollar_cove_charger: IRQ No:468 922<6>[ 7.597267] dollar_cove_charger dollar_cove_charger: IRQ No:469 923<6>[ 7.600238] dollar_cove_charger dollar_cove_charger: IRQ No:476 924<6>[ 7.603106] dollar_cove_charger dollar_cove_charger: IRQ No:477 925<6>[ 7.606087] dollar_cove_charger dollar_cove_charger: IRQ No:478 926<6>[ 7.608951] dollar_cove_charger dollar_cove_charger: IRQ No:479 927<6>[ 7.833417] register_usb_notifier 928<6>[ 7.861289] dollar_cove_charger dollar_cove_charger: pmic_chrg_probe: otg_gpio=407 929<6>[ 7.861384] dollar_cove_charger dollar_cove_charger: pmic_chrg_probe:Successfuly enabled otg_gpio=407 930<6>[ 7.861621] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charger: enable=1 931<6>[ 7.864108] dollar_cove_charger dollar_cove_charger: dc_xpwr_otg_event_worker: id_short=0 932<3>[ 7.867063] intel_powerclamp: Intel powerclamp does not run on family 6 model 76 933<4>[ 7.876827] int3400 thermal: probe of INT3400:00 failed with error -17 934<7>[ 7.885540] ACPI Exception: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20131218/evregion-297) 935<7>[ 7.885556] ACPI Error: Method parse/execution failed [\_SB_.STR0._TMP] (Node ffff880073083a00), AE_ERROR (20131218/psparse-536) 936<4>[ 7.885582] thermal thermal_zone4: failed to read out thermal zone 4 937<6>[ 7.892717] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=0 938<7>[ 7.894424] ACPI Exception: AE_ERROR, Returned by Handler for [UserDefinedRegion] (20131218/evregion-297) 939<7>[ 7.894439] ACPI Error: Method parse/execution failed [\_SB_.STR3._TMP] (Node ffff880073085500), AE_ERROR (20131218/psparse-536) 940<4>[ 7.894462] thermal thermal_zone5: failed to read out thermal zone 5 941<6>[ 7.902196] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 942<6>[ 7.902284] iTCO_wdt: Found a Cherry Trail SoC TCO device (Version=3, TCOBASE=0x0460) 943<6>[ 7.902790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 944<6>[ 7.903283] device-mapper: uevent: version 1.0.3 945<6>[ 7.903656] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected] 946<6>[ 7.903903] sdhci: Secure Digital Host Controller Interface driver 947<6>[ 7.903908] sdhci: Copyright(c) Pierre Ossman 948<6>[ 7.904424] mmc0: no vqmmc regulator found 949<6>[ 7.904431] mmc0: no vmmc regulator found 950<6>[ 7.904687] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA 951<6>[ 7.905114] mmc1: no vqmmc regulator found 952<6>[ 7.905122] mmc1: no vmmc regulator found 953<6>[ 7.905546] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA 954<6>[ 7.905866] mmc2: no vqmmc regulator found 955<6>[ 7.909640] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA 956<6>[ 7.909765] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=0 957<6>[ 7.914053] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) 958<6>[ 7.914086] EFI Variables Facility v0.08 2004-May-17 959<6>[ 7.927196] hidraw: raw HID events driver (C) Jiri Kosina 960<6>[ 7.930318] usbcore: registered new interface driver usbhid 961<6>[ 7.930325] usbhid: USB HID core driver 962<6>[ 7.930924] ashmem: initialized 963<6>[ 7.931175] logger: created 256K log 'log_main' 964<6>[ 7.931389] logger: created 256K log 'log_events' 965<6>[ 7.931593] logger: created 256K log 'log_radio' 966<6>[ 7.931800] logger: created 256K log 'log_system' 967<6>[ 7.932542] mdm_ctrl: probing mdm_ctrl 968<6>[ 7.932552] mdm_ctrl: Getting device infos 969<3>[ 7.932556] get_modem_acpi_data: Retrieving modem info from ACPI for device MCD0001:05 970<6>[ 7.941602] retrieve_acpi_modem_data: Getting ACPI data... 971<3>[ 7.941624] get_acpi_param: acpi_evaluate_object, status:0 972<3>[ 7.947828] get_acpi_param: acpi_evaluate_object, status:5 973<3>[ 7.953979] get_acpi_param: ERROR 5 evaluating ID:CONF 974<6>[ 7.959735] CONF field is empty. Might be a Baytrail FFRD8 board 975<3>[ 7.959743] get_acpi_param: acpi_evaluate_object, status:5 976<3>[ 7.965949] get_acpi_param: ERROR 5 evaluating ID:PMIC 977<3>[ 7.971707] retrieve_acpi_modem_data: ERROR evaluating PMIC info 978<3>[ 7.978445] retrieve_acpi_modem_data: ERROR retrieving data from ACPI!!! 979<3>[ 7.985993] mdm_ctrl modem_ctrl_get_dev_data: No registered info found. Disabling driver. 980<3>[ 7.995013] mdm_ctrl: failed to retrieve platform data 981<3>[ 8.001020] mdm_ctrl: ERROR initializing MCD (err:-19) 982<6>[ 8.007441] intel_warn_int: initialized. Interrupt=SCI GPE 0x0e 983<6>[ 8.015096] trigger_algo:Algo_status:2 984<6>[ 8.026000] dollar_cove_pwrsrc dollar_cove_pwrsrc: dc_xpwr_pwrsrc_probe: gpio_mux_cntl=297 985<6>[ 8.026032] dollar_cove_pwrsrc dollar_cove_pwrsrc: dc_xpwr_pwrsrc_probe:Successfuly enabled gpio_mux_cntl=297 986<6>[ 8.026052] dollar_cove_pwrsrc dollar_cove_pwrsrc: dc_xpwr_pwrsrc_probe: id_short=0 987<6>[ 8.050980] dollar_cove_adc dollar_cove_adc: dc_xpwr adc probed 988<6>[ 8.053735] mmc0: BKOPS_EN bit is not set 989<4>[ 8.053747] intel_rapl: RAPL domain uncore detection failed 990<4>[ 8.060005] intel_rapl: RAPL domain dram detection failed 991<6>[ 8.066753] rmnet_async_init++ 992<6>[ 8.066759] rmnet_init++ 993<6>[ 8.066779] rmnet_setup++ 994<4>[ 8.067193] [mmc_select_timing]: debug for change mmc mode from HS200 to DDR50. 995<6>[ 8.067409] rmnet_setup++ 996<6>[ 8.068266] rmnet_setup++ 997<6>[ 8.069184] 3RMNET: registering line disc successful. 998<6>[ 8.069788] usbcore: registered new interface driver snd-usb-audio 999<6>[ 8.070404] nau8824_i2c_probe enter 1000<3>[ 8.071472] snd_intel_sst: sst_platform_get_resources_edk 1001<3>[ 8.071507] snd_intel_sst: LPE base: 0x91600000 size:0x200000 1002<3>[ 8.071519] snd_intel_sst: IRAM base: 0x916c0000 1003<3>[ 8.071526] snd_intel_sst: DRAM base: 0x91700000 1004<3>[ 8.071544] snd_intel_sst: SHIM base: 0x91740000 1005<3>[ 8.071551] snd_intel_sst: Mailbox base: 0x91744000 1006<3>[ 8.071900] snd_intel_sst: DDR base: 0x20000000 1007<6>[ 8.071900] snd_intel_sst: Enter: sst_audio_platform_init 1008<6>[ 8.071903] snd_intel_sst: audio:set_cht_platform_config 1009<6>[ 8.072110] snd_soc_sst_platform: sst_platform_probe is deferred 1010<6>[ 8.072122] platform sst-platform: Driver sst-platform requests probe deferral 1011<3>[ 8.072128] snd_intel_sst: board_name:Cherry Trail CR 1012<6>[ 8.072130] snd_intel_sst: Registering machine device cht_nau88l24 1013<3>[ 8.072286] snd_intel_sst: Requesting FW fw_sst_22a8.bin now... 1014<4>[ 8.072348] intel_sst_acpi 808622A8:00: Direct firmware load failed with error -2 1015<4>[ 8.072351] intel_sst_acpi 808622A8:00: Falling back to user helper 1016<6>[ 8.073356] Netfilter messages via NETLINK v0.30. 1017<6>[ 8.073390] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 1018<6>[ 8.073748] ctnetlink v0.93: registering with nfnetlink. 1019<6>[ 8.103384] ip_tables: (C) 2000-2006 Netfilter Core Team 1020<6>[ 8.103479] TCP: cubic registered 1021<6>[ 8.103481] Initializing XFRM netlink socket 1022<6>[ 8.104691] NET: Registered protocol family 10 1023<6>[ 8.106000] ip6_tables: (C) 2000-2006 Netfilter Core Team 1024<6>[ 8.142001] sit: IPv6 over IPv4 tunneling driver 1025<6>[ 8.142837] NET: Registered protocol family 17 1026<6>[ 8.142868] NET: Registered protocol family 15 1027<6>[ 8.142889] l2tp_core: L2TP core driver, V2.0 1028<6>[ 8.142899] l2tp_ppp: PPPoL2TP kernel driver, V2.0 1029<5>[ 8.142922] Key type dns_resolver registered 1030<5>[ 8.145062] Loading compiled-in X.509 certificates 1031<5>[ 8.147659] Loaded X.509 cert 'Magrathea: Glacier signing key: 7c4181dccca95878810a6b86656840e10ea02724' 1032<6>[ 8.147677] registered taskstats version 1 1033<6>[ 8.150005] LDO_2: disabling 1034<6>[ 8.152879] regulator-dummy: disabling 1035<6>[ 8.153325] snd_soc_sst_platform: sst_platform_probe is deferred 1036<6>[ 8.153341] platform sst-platform: Driver sst-platform requests probe deferral 1037<6>[ 8.153360] Magic number: 13:256:929 1038<6>[ 8.153449] axp288_gpio dollar_cove_gpio: hash matches 1039<6>[ 8.153925] console [netcon0] enabled 1040<6>[ 8.153930] netconsole: network logging started 1041<6>[ 8.158618] dwc3 dwc3.0.auto: dwc3_resume_common 1042<6>[ 8.159295] dwc3 dwc3.0.auto: dwc3_suspend_common 1043<6>[ 8.159548] mmc0: new DDR MMC card at address 0001 1044<6>[ 8.159554] file system registered 1045<6>[ 8.160149] mmcblk0: mmc0:0001 BWBD3R 29.1 GiB 1046<6>[ 8.160315] mmcblk0boot0: mmc0:0001 BWBD3R partition 1 4.00 MiB 1047<6>[ 8.160467] mmcblk0boot1: mmc0:0001 BWBD3R partition 2 4.00 MiB 1048<6>[ 8.160675] mmcblk0rpmb: mmc0:0001 BWBD3R partition 3 4.00 MiB 1049<6>[ 8.162591] Number of LUNs=8 1050<6>[ 8.162605] Mass Storage Function, version: 2009/09/11 1051<6>[ 8.162611] LUN: removable file: (no medium) 1052<6>[ 8.163217] android_usb gadget: android_usb ready 1053<6>[ 8.167363] dwc3 dwc3.0.auto: dwc3_resume_common 1054<6>[ 8.167879] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 1055<6>[ 8.168339] dwc3 dwc3.0.auto: dwc3_suspend_common 1056<6>[ 8.169309] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input6 1057<6>[ 8.169979] snd_soc_sst_platform: sst_platform_probe is deferred 1058<6>[ 8.169996] platform sst-platform: Driver sst-platform requests probe deferral 1059<6>[ 8.170118] input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input7 1060<6>[ 8.170415] snd_soc_sst_platform: sst_platform_probe is deferred 1061<6>[ 8.170428] platform sst-platform: Driver sst-platform requests probe deferral 1062<6>[ 8.171523] rtc_cmos 00:07: setting system clock to 2017-12-05 09:56:36 UTC (1512467796) 1063<6>[ 8.172969] Boot boost enabled 1064<6>[ 8.173039] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 1065<6>[ 8.173043] EDD information not available. 1066<3>[ 8.173968] had: Vidya: Enter alsa_card_intelhad_init 1067<6>[ 8.179707] had: ******** HAD DRIVER loading.. Ver: 0.01.003 1068<6>[ 8.180367] mmcblk0boot1: unknown partition table 1069<6>[ 8.181567] [drm] mid_hdmi_audio_register: Scheduling HDMI audio work queue 1070<6>[ 8.181706] snd_soc_sst_platform: sst_platform_probe is deferred 1071<6>[ 8.181724] platform sst-platform: Driver sst-platform requests probe deferral 1072<6>[ 8.181811] mmcblk0boot0: unknown partition table 1073<3>[ 8.181903] cht_nau88l24 cht_nau88l24: ASoC: CPU DAI Headset-cpu-dai not registered 1074<6>[ 8.182129] snd_soc_sst_platform: sst_platform_probe is deferred 1075<6>[ 8.182137] platform sst-platform: Driver sst-platform requests probe deferral 1076<3>[ 8.190527] cht_cr_nau88l24: snd_soc_register_card failed -517 1077<6>[ 8.197219] platform cht_nau88l24: Driver cht_nau88l24 requests probe deferral 1078<6>[ 8.197365] snd_soc_sst_platform: sst_platform_probe is deferred 1079<6>[ 8.197375] platform sst-platform: Driver sst-platform requests probe deferral 1080<3>[ 8.197428] cht_nau88l24 cht_nau88l24: ASoC: CPU DAI Headset-cpu-dai not registered 1081<6>[ 8.197530] cht_cr_nau88l24: Cherrytrail Machine Driver cht_nau8824 registerd 1082<6>[ 8.197554] ALSA device list: 1083<6>[ 8.197558] #0: 1084<3>[ 8.206069] cht_cr_nau88l24: snd_soc_register_card failed -517 1085<6>[ 8.206075] platform cht_nau88l24: Driver cht_nau88l24 requests probe deferral 1086<6>[ 8.215637] Freeing unused kernel memory: 1248K (ffffffff8241a000 - ffffffff82552000) 1087<6>[ 8.215647] Write protecting the kernel read-only data: 18432k 1088<6>[ 8.229943] Freeing unused kernel memory: 2008K (ffff880001a0a000 - ffff880001c00000) 1089<6>[ 8.231076] Freeing unused kernel memory: 156K (ffff8800021d9000 - ffff880002200000) 1090<11>[ 8.232314] init: bootmode=unknown!! 1091<6>[ 8.239635] mmc1: new high speed SDIO card at address 0001 1092<7>[ 8.239802] SELinux: 2048 avtab hash slots, 5867 rules. 1093<7>[ 8.241381] SELinux: 2048 avtab hash slots, 5867 rules. 1094<7>[ 8.241402] SELinux: 1 users, 2 roles, 475 types, 0 bools, 1 sens, 1024 cats 1095<7>[ 8.241409] SELinux: 86 classes, 5867 rules 1096<7>[ 8.242109] SELinux: Completing initialization. 1097<7>[ 8.242113] SELinux: Setting up existing superblocks. 1098<7>[ 8.242125] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1099<7>[ 8.242147] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts 1100<7>[ 8.242182] SELinux: initialized (dev bdev, type bdev), not configured for labeling 1101<7>[ 8.242190] SELinux: initialized (dev proc, type proc), uses genfs_contexts 1102<7>[ 8.242207] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs 1103<7>[ 8.242393] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts 1104<7>[ 8.246187] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs 1105<7>[ 8.246202] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs 1106<7>[ 8.246210] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling 1107<7>[ 8.246216] SELinux: initialized (dev aio, type aio), not configured for labeling 1108<7>[ 8.246223] SELinux: initialized (dev devpts, type devpts), uses transition SIDs 1109<7>[ 8.246239] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs 1110<7>[ 8.246249] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts 1111<7>[ 8.246283] SELinux: initialized (dev drm, type drm), not configured for labeling 1112<7>[ 8.246290] SELinux: initialized (dev configfs, type configfs), not configured for labeling 1113<7>[ 8.246296] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1114<7>[ 8.246315] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts 1115<6>[ 8.252050] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=500 1116<5>[ 8.264383] audit: type=1403 audit(1512467796.592:2): policy loaded auid=4294967295 ses=4294967295 1117<5>[ 8.268188] audit: type=1404 audit(1512467796.596:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 1118<6>[ 8.270416] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1119<6>[ 8.354077] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=0 1120<11>[ 8.504392] init: /init.aosp.rc: 559: ignored duplicate definition of service 'media' 1121<11>[ 8.513517] init: /init.aosp.rc: 590: ignored duplicate definition of service 'flash_recovery' 1122<11>[ 8.523726] init: /init.cht_cr_mrd.rc: 199: invalid option 'start' 1123<11>[ 8.531187] init: could not import file '/init.crashlogd.rc' from '/init.cht_cr_mrd.rc' 1124<6>[ 8.539297] intel-cht-otg intel-cht-otg.0: USB_EVENT_VBUS vbus valid 1125<6>[ 8.539303] dwc3 dwc3.0.auto: DWC3 OTG Notify USB_EVENT_VBUS 1126<6>[ 8.539309] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:1 val:-1 1127<6>[ 8.539312] process_cable_props: event:0, type:1, ma:500 1128<11>[ 8.540325] init: could not import file '/init.coredump.rc' from '/init.cht_cr_mrd.rc' 1129<6>[ 8.543652] intel-cht-otg intel-cht-otg.0: USB_EVENT_VBUS vbus valid 1130<6>[ 8.543655] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:1 val:-1 1131<6>[ 8.543657] process_cable_props: event:0, type:1, ma:500 1132<11>[ 8.549203] init: could not import file '/init.debug-charging.rc' from '/init.cht_cr_mrd.rc' 1133<6>[ 8.552538] intel-cht-otg intel-cht-otg.0: watchdog started 1134<6>[ 8.556248] dwc3 dwc3.0.auto: dwc3_resume_common 1135<11>[ 8.558666] init: could not import file '/init.diag.rc' from '/init.cht_cr_mrd.rc' 1136<11>[ 8.567309] init: /init.modem.allinone.rc: 146: ignored duplicate definition of service 'ril-daemon' 1137<7>[ 8.578333] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts 1138<6>[ 8.783914] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=1 1139<6>[ 9.007870] trigger_algo:Algo_status:2 1140<6>[ 9.038010] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1141<6>[ 9.055871] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1142<6>[ 9.167439] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=1 1143<6>[ 9.186638] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=1 1144<6>[ 9.638126] trigger_algo:Algo_status:2 1145<6>[ 9.662751] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1146<6>[ 9.679996] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1147<11>[ 9.782837] init: /dev/hw_random not found 1148<6>[ 9.787480] keychord: using input dev Power Button for fevent 1149<6>[ 9.787487] keychord: using input dev Power Button for fevent 1150<6>[ 9.787515] keychord: using input dev gpio-keys for fevent 1151<6>[ 9.787525] keychord: using input dev gpio-keys for fevent 1152<7>[ 9.788008] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1153<7>[ 9.788186] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1154<7>[ 9.788399] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1155<7>[ 9.789575] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1156<7>[ 9.789698] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1157<7>[ 9.790751] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1158<7>[ 9.791361] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts 1159<11>[ 9.792563] init: /dev/hw_random not found 1160<6>[ 9.816097] bio: create slab <bio-1> at 1 1161<6>[ 9.832406] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) 1162<7>[ 9.832427] SELinux: initialized (dev dm-0, type ext4), uses xattr 1163<14>[ 9.832504] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0 1164<4>[ 9.833010] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option 1165<6>[ 9.850189] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro 1166<7>[ 9.850212] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr 1167<14>[ 9.850275] fs_mgr: check_fs(): mount(/dev/block/by-name/android_cache,/cache,ext4)=0 1168<14>[ 9.876062] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_cache 1169<14>[ 10.003058] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1170<14>[ 10.003106] e2fsck: /dev/block/by-name/android_cache: clean, 24/96000 files, 12648/384000 blocks 1171<6>[ 10.007826] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: errors=panic 1172<7>[ 10.007846] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr 1173<14>[ 10.007898] fs_mgr: __mount(source=/dev/block/by-name/android_cache,target=/cache,type=ext4)=0 1174<3>[ 10.008305] EXT4-fs (mmcblk0p9): VFS: Can't find ext4 filesystem 1175<14>[ 10.015190] fs_mgr: check_fs(): mount(/dev/block/by-name/android_data,/data,ext4)=-1 1176<14>[ 10.015209] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_data 1177<14>[ 10.024502] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1178<14>[ 10.024534] e2fsck: ext2fs_open2: Bad magic number in super-block 1179<14>[ 10.024543] e2fsck: /system/bin/e2fsck: Superblock invalid, trying backup blocks... 1180<14>[ 10.024550] e2fsck: /system/bin/e2fsck: Bad magic number in super-block while trying to open /dev/block/by-name/android_data 1181<14>[ 10.024557] e2fsck: 1182<14>[ 10.024563] e2fsck: The superblock could not be read or does not describe a correct ext2 1183<14>[ 10.024569] e2fsck: filesystem. If the device is valid and it really contains an ext2 1184<14>[ 10.024575] e2fsck: filesystem (and not swap or ufs or something else), then the superblock 1185<14>[ 10.024581] e2fsck: is corrupt, and you might try running e2fsck with an alternate superblock: 1186<14>[ 10.024587] e2fsck: e2fsck -b 8193 <device> 1187<14>[ 10.024593] e2fsck: 1188<14>[ 10.024603] e2fsck: e2fsck terminated by exit(8) 1189<3>[ 10.025095] EXT4-fs (mmcblk0p9): VFS: Can't find ext4 filesystem 1190<14>[ 10.035391] fs_mgr: __mount(source=/dev/block/by-name/android_data,target=/data,type=ext4)=-1 1191<11>[ 10.036885] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/by-name/android_data for mount /data type ext4 ) 1192<7>[ 10.050098] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1193<4>[ 10.051418] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option 1194<6>[ 10.074778] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro 1195<7>[ 10.074800] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr 1196<14>[ 10.074854] fs_mgr: check_fs(): mount(/dev/block/by-name/android_config,/config,ext4)=0 1197<14>[ 10.090312] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/android_config 1198<14>[ 10.096570] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1199<14>[ 10.096603] e2fsck: /dev/block/by-name/android_config: clean, 18/512 files, 1078/2048 blocks 1200<6>[ 10.100892] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=panic 1201<7>[ 10.100910] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr 1202<14>[ 10.100955] fs_mgr: __mount(source=/dev/block/by-name/android_config,target=/config,type=ext4)=0 1203<7>[ 10.101801] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts 1204<11>[ 10.106025] init: cannot find '/system/bin/bd_prov', disabling 'bd_prov' 1205<7>[ 10.114415] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 1206<6>[ 10.188930] Adding 102396k swap on /dev/block/zram0. Priority:-1 extents:1 across:102396k SS 1207<6>[ 10.220352] binder: 2426:2426 transaction failed 29189, size 0-0 1208<11>[ 10.221243] init: cannot find '/system/bin/mmgr', disabling 'mmgr' 1209<5>[ 10.224370] iTCO_wdt: iTCO_wdt_ping 1210<5>[ 10.224376] iTCO_wdt: iTCO_wdt_ping 1211<6>[ 10.284757] dollar_cove_charger dollar_cove_charger: Start Charging IRQ 1212<3>[ 10.308574] bt_lpm OBDA8723:00: Error evaluating UART port number 1213<4>[ 10.316041] ------------[ cut here ]------------ 1214<4>[ 10.323493] WARNING: CPU: 0 PID: 1 at ../../../../../../../kernel/cht/drivers/misc/bt_lpm/bt_lpm.c:241 set_wake_locked+0xb4/0xc0 [bt_lpm]() 1215<4>[ 10.338718] Modules linked in: bt_lpm(+) ov8858_driver videobuf_vmalloc 6lowpan_iphc videobuf_core ip6table_raw iptable_raw rfkill_gpio 1216<4>[ 10.353320] CPU: 0 PID: 1 Comm: init Not tainted 3.14.37-x86_64-L1-R517 #1 1217<4>[ 10.361026] Hardware name: cube i1-TFD/Cherry Trail CR, BIOS 5.11 06/26/2017 1218<7>[ 10.368921] 0000000000000009 ffff88007319db70 ffffffff819f4853 0000000000000000 1219<7>[ 10.368929] ffff88007319dba8 ffffffff8108993d 0000000000000000 ffff88007a06fc10 1220<7>[ 10.368934] ffff88007a06fc00 0000000000000006 0000000000000001 ffff88007319dbb8 1221<7>[ 10.368940] Call Trace: 1222<4>[ 10.368953] [<ffffffff819f4853>] dump_stack+0x4e/0x7a 1223<4>[ 10.374713] [<ffffffff8108993d>] warn_slowpath_common+0x7d/0xa0 1224<4>[ 10.381444] [<ffffffff81089a1a>] warn_slowpath_null+0x1a/0x20 1225<4>[ 10.387979] [<ffffffffa00424b4>] set_wake_locked+0xb4/0xc0 [bt_lpm] 1226<4>[ 10.395101] [<ffffffffa0042554>] bt_lpm_rfkill_set_power+0x94/0xe0 [bt_lpm] 1227<4>[ 10.402994] [<ffffffffa0042864>] bt_lpm_probe+0x1f4/0x578 [bt_lpm] 1228<4>[ 10.410040] [<ffffffff815699a5>] platform_drv_probe+0x45/0xb0 1229<4>[ 10.416582] [<ffffffff81567152>] ? driver_sysfs_add+0x82/0xb0 1230<4>[ 10.423304] [<ffffffff8156789d>] driver_probe_device+0x12d/0x3e0 1231<4>[ 10.430128] [<ffffffff81567c23>] __driver_attach+0x93/0xa0 1232<4>[ 10.436374] [<ffffffff81567b90>] ? __device_attach+0x40/0x40 1233<4>[ 10.442816] [<ffffffff81565823>] bus_for_each_dev+0x63/0xa0 1234<4>[ 10.449160] [<ffffffff8156724e>] driver_attach+0x1e/0x20 1235<4>[ 10.455213] [<ffffffff81566e30>] bus_add_driver+0x180/0x250 1236<4>[ 10.461571] [<ffffffffa0047000>] ? 0xffffffffa0046fff 1237<4>[ 10.467360] [<ffffffff81568474>] driver_register+0x64/0xf0 1238<4>[ 10.473610] [<ffffffffa0047000>] ? 0xffffffffa0046fff 1239<4>[ 10.479373] [<ffffffff815698ca>] __platform_driver_register+0x4a/0x50 1240<4>[ 10.486690] [<ffffffffa004701e>] bt_lpm_init+0x1e/0x1000 [bt_lpm] 1241<4>[ 10.493621] [<ffffffff81000332>] do_one_initcall+0xf2/0x1a0 1242<4>[ 10.499964] [<ffffffff8103f6a3>] ? set_memory_nx+0x43/0x50 1243<4>[ 10.506214] [<ffffffff810fc04f>] load_module+0x1b2f/0x2490 1244<4>[ 10.512455] [<ffffffff810f7c80>] ? store_uevent+0x40/0x40 1245<4>[ 10.518604] [<ffffffff810fca71>] SyS_init_module+0xc1/0x110 1246<4>[ 10.524945] [<ffffffff81a03f49>] ia32_do_call+0x13/0x13 1247<4>[ 10.530966] ---[ end trace d3b4470f580c75f2 ]--- 1248<4>[ 10.537626] ------------[ cut here ]------------ 1249<38>[ 10.539670] logd.auditd: start 1250<4>[ 10.542971] WARNING: CPU: 0 PID: 1 at ../../../../../../../kernel/cht/drivers/misc/bt_lpm/bt_lpm.c:241 set_wake_locked+0xb4/0xc0 [bt_lpm]() 1251<7>[ 10.557055] unicam:init_unicam 1252<4>[ 10.557069] Modules linked in: unicam_driver(+) bt_lpm(+) ov8858_driver videobuf_vmalloc 6lowpan_iphc videobuf_core ip6table_raw iptable_raw rfkill_gpio 1253<4>[ 10.572749] CPU: 0 PID: 1 Comm: init Tainted: G W 3.14.37-x86_64-L1-R517 #1 1254<4>[ 10.581524] Hardware name: cube i1-TFD/Cherry Trail CR, BIOS 5.11 06/26/2017 1255<7>[ 10.589424] 0000000000000009 ffff88007319daf0 ffffffff819f4853 0000000000000000 1256<7>[ 10.589432] ffff88007319db28 ffffffff8108993d 0000000000000000 0000000000000001 1257<7>[ 10.589439] 0000000000000001 ffff88007797b080 0000000000000001 ffff88007319db38 1258<7>[ 10.589445] Call Trace: 1259<4>[ 10.589459] [<ffffffff819f4853>] dump_stack+0x4e/0x7a 1260<4>[ 10.595225] [<ffffffff8108993d>] warn_slowpath_common+0x7d/0xa0 1261<4>[ 10.601962] [<ffffffff81089a1a>] warn_slowpath_null+0x1a/0x20 1262<4>[ 10.608504] [<ffffffffa00424b4>] set_wake_locked+0xb4/0xc0 [bt_lpm] 1263<4>[ 10.615626] [<ffffffffa0042554>] bt_lpm_rfkill_set_power+0x94/0xe0 [bt_lpm] 1264<4>[ 10.623528] [<ffffffff819e90e0>] rfkill_set_block+0x90/0x140 1265<4>[ 10.629970] [<ffffffff819e91de>] __rfkill_switch_all+0x4e/0x70 1266<4>[ 10.636605] [<ffffffff819e97c6>] rfkill_register+0x276/0x2a0 1267<4>[ 10.643046] [<ffffffffa0042881>] bt_lpm_probe+0x211/0x578 [bt_lpm] 1268<4>[ 10.650074] [<ffffffff815699a5>] platform_drv_probe+0x45/0xb0 1269<4>[ 10.656617] [<ffffffff81567152>] ? driver_sysfs_add+0x82/0xb0 1270<4>[ 10.663158] [<ffffffff8156789d>] driver_probe_device+0x12d/0x3e0 1271<7>[ 10.666873] unicam:uni_probe name: OVTI2680:01, unicam_data = 1215 1272<7>[ 10.666876] unicam:not find firmware PPR 1273<7>[ 10.666878] unicam:uni_probe : uni_data[0].name ov5648 1274<6>[ 10.666900] ppr_cam i2c-OVTI2680:01: gmin: initializing atomisp module subdev data.PMIC ID 2 1275<6>[ 10.666903] ppr_cam i2c-OVTI2680:01: suddev name = ppr_cam 1-0036 1276<3>[ 10.666910] gmin_get_var_int var: CamClk, ret: 4. 1277<3>[ 10.666914] gmin_get_var_int var: ClkSrc, ret: 0. 1278<3>[ 10.666917] gmin_get_var_int var: CsiPort, ret: 1. 1279<3>[ 10.666921] gmin_get_var_int var: CsiLanes, ret: 1. 1280<3>[ 10.667086] ppr_cam i2c-OVTI2680:01: gmin_subdev_add gpio0 is ok. 1281<3>[ 10.667115] ppr_cam i2c-OVTI2680:01: gmin_subdev_add gpio1 is ok. 1282<7>[ 10.667142] ################5########## entry uni_s_config line = 2113 1283<7>[ 10.667144] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1284<3>[ 10.667146] gmin_gpio1_ctrl. 1285<3>[ 10.667147] gmin_gpio1_ctrl enter. 1286<3>[ 10.667157] gmin_gpio0_ctrl. 1287<3>[ 10.667158] gmin_gpio0_ctrl enter. 1288<4>[ 10.667326] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO 1289<3>[ 10.667327] gmin_get_config_var() the end return !ret = -2 1290<3>[ 10.667328] gmin_get_var_int var: V2P8GPIO, ret: ffffffff. 1291<4>[ 10.667433] (NULL device *): Failed to find gmin variable gmin_V1P8GPIO 1292<3>[ 10.667434] gmin_get_config_var() the end return !ret = -2 1293<3>[ 10.667435] gmin_get_var_int var: V1P8GPIO, ret: ffffffff. 1294<3>[ 10.672931] gmin_v1p8_ctrl PMIC_AXP. 1295<3>[ 10.676698] axp_regulator_set success. 1296<3>[ 10.679757] axp_regulator_set success. 1297<7>[ 10.693058] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1298<3>[ 10.693060] gmin_gpio0_ctrl. 1299<3>[ 10.693061] gmin_gpio0_ctrl enter. 1300<3>[ 10.695820] gmin_gpio0_ctrl. 1301<3>[ 10.695822] gmin_gpio0_ctrl enter. 1302<3>[ 10.716925] gmin_gpio0_ctrl. 1303<3>[ 10.716927] gmin_gpio0_ctrl enter. 1304<3>[ 10.719909] gmin_gpio1_ctrl. 1305<3>[ 10.719911] gmin_gpio1_ctrl enter. 1306<6>[ 10.746856] ppr_cam i2c-OVTI2680:01: camera pdata: port: 1 lanes: 1 order: 00000002 1307<7>[ 10.746860] unicam:i2c addr: 0x36 0x36 1308<7>[ 10.746863] unicam:uni_read_reg data_length:0x2 reg:0x300a 1309<7>[ 10.759065] unicam:det_id 0x2680 need 0x5648 1310<3>[ 10.759073] ppr_cam i2c-OVTI2680:01: unicam_detect err s_config. 1311<7>[ 10.759079] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1312<3>[ 10.759080] gmin_gpio1_ctrl. 1313<3>[ 10.759081] gmin_gpio1_ctrl enter. 1314<3>[ 10.759093] gmin_gpio0_ctrl. 1315<3>[ 10.759093] gmin_gpio0_ctrl enter. 1316<3>[ 10.761416] axp_regulator_set success. 1317<3>[ 10.761417] gmin_v1p8_ctrl PMIC_AXP. 1318<3>[ 10.766657] axp_regulator_set success. 1319<7>[ 10.766663] unicam:uni_probe : uni_data[1].name ov5670 1320<7>[ 10.766668] ################5########## entry uni_s_config line = 2113 1321<7>[ 10.766669] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1322<3>[ 10.766670] gmin_gpio1_ctrl. 1323<3>[ 10.766670] gmin_gpio1_ctrl enter. 1324<3>[ 10.766681] gmin_gpio0_ctrl. 1325<3>[ 10.766682] gmin_gpio0_ctrl enter. 1326<3>[ 10.772629] gmin_v1p8_ctrl PMIC_AXP. 1327<3>[ 10.775990] axp_regulator_set success. 1328<3>[ 10.778993] axp_regulator_set success. 1329<7>[ 10.792706] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1330<3>[ 10.792709] gmin_gpio0_ctrl. 1331<3>[ 10.792709] gmin_gpio0_ctrl enter. 1332<3>[ 10.795844] gmin_gpio0_ctrl. 1333<3>[ 10.795846] gmin_gpio0_ctrl enter. 1334<3>[ 10.816811] gmin_gpio0_ctrl. 1335<3>[ 10.816813] gmin_gpio0_ctrl enter. 1336<3>[ 10.820753] gmin_gpio1_ctrl. 1337<3>[ 10.820755] gmin_gpio1_ctrl enter. 1338<6>[ 10.846768] ppr_cam i2c-OVTI2680:01: camera pdata: port: 1 lanes: 1 order: 00000002 1339<7>[ 10.846774] unicam:i2c addr: 0x36 0x36 1340<7>[ 10.846776] unicam:uni_read_reg data_length:0x2 reg:0x300b 1341<7>[ 10.855379] unicam:det_id 0x8000 need 0x5670 1342<3>[ 10.855387] ppr_cam i2c-OVTI2680:01: unicam_detect err s_config. 1343<7>[ 10.855393] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1344<3>[ 10.855395] gmin_gpio1_ctrl. 1345<3>[ 10.855395] gmin_gpio1_ctrl enter. 1346<3>[ 10.855408] gmin_gpio0_ctrl. 1347<3>[ 10.855408] gmin_gpio0_ctrl enter. 1348<3>[ 10.859179] axp_regulator_set success. 1349<3>[ 10.859180] gmin_v1p8_ctrl PMIC_AXP. 1350<3>[ 10.862049] axp_regulator_set success. 1351<7>[ 10.862053] unicam:uni_probe : uni_data[2].name ov2680 1352<7>[ 10.862057] ################5########## entry uni_s_config line = 2113 1353<7>[ 10.862059] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1354<3>[ 10.862060] gmin_gpio1_ctrl. 1355<3>[ 10.862060] gmin_gpio1_ctrl enter. 1356<3>[ 10.862069] gmin_gpio0_ctrl. 1357<3>[ 10.862070] gmin_gpio0_ctrl enter. 1358<3>[ 10.867761] gmin_v1p8_ctrl PMIC_AXP. 1359<3>[ 10.871726] axp_regulator_set success. 1360<3>[ 10.873729] axp_regulator_set success. 1361<7>[ 10.887370] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1362<3>[ 10.887377] gmin_gpio0_ctrl. 1363<3>[ 10.887379] gmin_gpio0_ctrl enter. 1364<3>[ 10.889776] gmin_gpio0_ctrl. 1365<3>[ 10.889778] gmin_gpio0_ctrl enter. 1366<3>[ 10.910867] gmin_gpio0_ctrl. 1367<3>[ 10.910869] gmin_gpio0_ctrl enter. 1368<3>[ 10.913657] gmin_gpio1_ctrl. 1369<3>[ 10.913659] gmin_gpio1_ctrl enter. 1370<6>[ 10.940771] ppr_cam i2c-OVTI2680:01: camera pdata: port: 1 lanes: 1 order: 00000002 1371<7>[ 10.940774] unicam:i2c addr: 0x36 0x36 1372<7>[ 10.940777] unicam:uni_read_reg data_length:0x2 reg:0x300a 1373<7>[ 10.947639] unicam:det_id 0x2680 need 0x2680 1374<7>[ 10.947643] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1375<3>[ 10.947645] gmin_gpio1_ctrl. 1376<3>[ 10.947646] gmin_gpio1_ctrl enter. 1377<3>[ 10.947659] gmin_gpio0_ctrl. 1378<3>[ 10.947659] gmin_gpio0_ctrl enter. 1379<3>[ 10.951029] axp_regulator_set success. 1380<3>[ 10.951031] gmin_v1p8_ctrl PMIC_AXP. 1381<3>[ 10.953310] axp_regulator_set success. 1382<6>[ 10.953318] ppr_cam i2c-OVTI2680:01: register atomisp i2c module type 1 1383<7>[ 10.953321] unicam:use build in table 1384<7>[ 10.953323] unicam:uni_probe,af_type,0 1385<3>[ 10.969270] sst-platform sst-platform: ASoC: no sink widget found for Audio Capture 1386<3>[ 10.969274] sst-platform sst-platform: ASoC: Failed to add route media3_out -> direct -> Audio Capture 1387<6>[ 10.986155] nau8824_codec_probe enter 1388<7>[ 10.998044] entry gc0310_init_mod 1389<4>[ 11.021303] [<ffffffff81567c23>] __driver_attach+0x93/0xa0 1390<4>[ 11.027706] [<ffffffff81567b90>] ? __device_attach+0x40/0x40 1391<4>[ 11.034156] [<ffffffff81565823>] bus_for_each_dev+0x63/0xa0 1392<4>[ 11.040617] [<ffffffff8156724e>] driver_attach+0x1e/0x20 1393<4>[ 11.046677] [<ffffffff81566e30>] bus_add_driver+0x180/0x250 1394<4>[ 11.053029] [<ffffffffa0047000>] ? 0xffffffffa0046fff 1395<4>[ 11.058798] [<ffffffff81568474>] driver_register+0x64/0xf0 1396<4>[ 11.065108] [<ffffffffa0047000>] ? 0xffffffffa0046fff 1397<4>[ 11.070877] [<ffffffff815698ca>] __platform_driver_register+0x4a/0x50 1398<4>[ 11.078212] [<ffffffffa004701e>] bt_lpm_init+0x1e/0x1000 [bt_lpm] 1399<4>[ 11.085143] [<ffffffff81000332>] do_one_initcall+0xf2/0x1a0 1400<4>[ 11.091493] [<ffffffff8103f6a3>] ? set_memory_nx+0x43/0x50 1401<4>[ 11.097746] [<ffffffff810fc04f>] load_module+0x1b2f/0x2490 1402<4>[ 11.103998] [<ffffffff810f7c80>] ? store_uevent+0x40/0x40 1403<4>[ 11.110154] [<ffffffff810fca71>] SyS_init_module+0xc1/0x110 1404<4>[ 11.116601] [<ffffffff81a03f49>] ia32_do_call+0x13/0x13 1405<4>[ 11.122632] ---[ end trace d3b4470f580c75f3 ]--- 1406<6>[ 11.178383] cfg80211: Calling CRDA to update world regulatory domain 1407<6>[ 11.186165] atomisp-css2401a0_v21 0000:00:03.0: enabling device (0000 -> 0002) 1408<6>[ 11.186499] atomisp-css2401a0_v21 0000:00:03.0: ISP HPLL frequency base = 1600 MHz 1409<4>[ 11.207262] snd-soc-dummy snd-soc-dummy: ASoC: Failed to create platform debugfs directory 1410<6>[ 11.217250] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> Headset-cpu-dai mapping ok 1411<6>[ 11.217331] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> Deepbuffer-cpu-dai mapping ok 1412<6>[ 11.217379] compress asoc: snd-soc-dummy-dai <-> Compress-cpu-dai mapping ok 1413<6>[ 11.217487] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> Voip-cpu-dai mapping ok 1414<6>[ 11.217578] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> Lowlatency-cpu-dai mapping ok 1415<6>[ 11.217856] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> Probe-cpu-dai mapping ok 1416<6>[ 11.218056] cht_nau88l24 cht_nau88l24: nau8824-aif1 <-> ssp2-port mapping ok 1417<6>[ 11.218090] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok 1418<6>[ 11.218127] cht_nau88l24 cht_nau88l24: snd-soc-dummy-dai <-> snd-soc-dummy-dai mapping ok 1419<3>[ 11.218194] cht_nau88l24 cht_nau88l24: ASoC: Failed to add Headset Mic Switch: -16 1420<6>[ 11.227470] cht_cr_nau88l24: cht_hs_detection:Check hs insertion after 500 msec 1421<6>[ 11.258152] input: cherrytrailaud Headset Jack as /devices/platform/cht_nau88l24/sound/card1/input8 1422<6>[ 11.259977] keychord: using input dev cherrytrailaud Headset Jack for fevent 1423<6>[ 11.260472] cht_cr_nau88l24: snd_cht_mc_probe successful 1424<7>[ 11.299735] RTL871X: module init start 1425<7>[ 11.299745] RTL871X: rtl8723bs v4.3.6.2_12080.20141030_BTCOEX20140702-5140 1426<7>[ 11.299749] RTL871X: build time: May 3 2017 11:37:51 1427<7>[ 11.299752] RTL871X: rtl8723bs BT-Coex version = BTCOEX20140702-5140 1428<7>[ 11.345948] RTL871X: rtw_init_netdev: pnetdev->netdev_ops=ffffffffa02ddd40, rtw_netdev_ops=ffffffffa02ddd40 1429<7>[ 11.456003] RTL871X: rtw_init_netdev: pnetdev->netdev_ops=ffffffffa02ddd40, rtw_netdev_ops=ffffffffa02ddd40 1430<7>[ 11.459004] RTL871X: rtw_ndev_init(wlan0) 1431<7>[ 11.459117] RTL871X: rtw_ndev_notifier_call(wlan0) state:16 1432<7>[ 11.461330] RTL871X: rtw_ndev_notifier_call(wlan0) state:5 1433<7>[ 11.461410] RTL871X: rtw_ndev_init(p2p0) 1434<7>[ 11.461500] RTL871X: rtw_ndev_notifier_call(p2p0) state:16 1435<7>[ 11.463077] RTL871X: rtw_ndev_notifier_call(p2p0) state:5 1436<7>[ 11.463447] RTL871X: turn wifi off 1437<7>[ 11.463761] RTL871X: module init ret=0 1438<6>[ 11.465659] [xhci_pci_suspend], xhci_root_hub pointer:0x79c3e000 1439<6>[ 11.465670] wgq[xhci_suspend-932] do_wakeup[1] 1440<7>[ 11.466173] atomisp-css2401a0_v21 0000:00:03.0: irq 148 for MSI/MSI-X 1441<3>[ 11.469581] android_usb: already disabled 1442<6>[ 11.476011] android_usb: selecting functions: adb 1443<6>[ 11.476132] android_usb: enabling function ffs 1444<6>[ 11.476137] android_usb: wait ffs to be ready 1445<11>[ 11.477243] init: cannot find '/system/bin/cws_manu', disabling 'gnss_rest_wpc' 1446<11>[ 11.485536] init: cannot find '/system/bin/cws_manu', disabling 'gnss_rest_mec' 1447<7>[ 11.507270] initing vmmctrl module 1448<3>[ 11.525238] [hid-ish]: ish_init():+++ [Build 0195-fix-recv-hid-hw-reset] 1449<7>[ 11.541440] unicam:uni_probe name: front:10, unicam_data = -2144731099 1450<7>[ 11.541449] unicam:not find firmware PPR 1451<7>[ 11.541453] unicam:uni_probe : uni_data[0].name gc2355 1452<6>[ 11.541466] ppr_cam i2c-front:10: gmin: initializing atomisp module subdev data.PMIC ID 2 1453<6>[ 11.541470] ppr_cam i2c-front:10: suddev name = ppr_cam 0-0010 1454<3>[ 11.541479] gmin_get_var_int var: CamClk, ret: 2. 1455<3>[ 11.546850] gmin_get_var_int var: ClkSrc, ret: 0. 1456<3>[ 11.552148] gmin_get_var_int var: CsiPort, ret: 0. 1457<3>[ 11.557517] gmin_get_var_int var: CsiLanes, ret: 1. 1458<3>[ 11.561664] android_usb: already disabled 1459<6>[ 11.561787] android_usb: selecting functions: mtp 1460<6>[ 11.561819] android_usb: enabling function mtp 1461<6>[ 11.561823] mtp_bind_config 1462<3>[ 11.567686] ppr_cam i2c-front:10: gmin_subdev_add gpio0 is ok. 1463<3>[ 11.574236] ppr_cam i2c-front:10: gmin_subdev_add gpio1 is ok. 1464<7>[ 11.580778] ################5########## entry uni_s_config line = 2113 1465<7>[ 11.580784] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1466<3>[ 11.580787] gmin_gpio1_ctrl. 1467<3>[ 11.584011] gmin_gpio1_ctrl enter. 1468<3>[ 11.587820] gmin_gpio0_ctrl. 1469<3>[ 11.591048] gmin_gpio0_ctrl enter. 1470<3>[ 11.600413] gmin_v1p8_ctrl PMIC_AXP. 1471<3>[ 11.608729] axp_regulator_set success. 1472<3>[ 11.616939] axp_regulator_set success. 1473<7>[ 11.634544] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1474<3>[ 11.634556] gmin_gpio0_ctrl. 1475<3>[ 11.638782] gmin_gpio0_ctrl enter. 1476<3>[ 11.645465] gmin_gpio0_ctrl. 1477<3>[ 11.648754] gmin_gpio0_ctrl enter. 1478<6>[ 11.666377] dwc3 dwc3.0.auto: otg_set_power: 2 mA 1479<6>[ 11.666390] intel-cht-otg intel-cht-otg.0: unknown notification 1480<6>[ 11.666395] process_cable_props: event:0, type:1, ma:1500 1481<6>[ 11.666410] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1482<6>[ 11.666418] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1483<3>[ 11.673388] gmin_gpio0_ctrl. 1484<3>[ 11.676657] gmin_gpio0_ctrl enter. 1485<3>[ 11.683374] gmin_gpio1_ctrl. 1486<3>[ 11.686606] gmin_gpio1_ctrl enter. 1487<6>[ 11.717664] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=1 1488<6>[ 11.719591] ppr_cam i2c-front:10: camera pdata: port: 0 lanes: 1 order: 00000003 1489<7>[ 11.719596] unicam:i2c addr: 0x3c 0x10 1490<7>[ 11.720351] unicam:i2c read from offset 0x000000f0 failed with error -121 1491<7>[ 11.720990] unicam:i2c read from offset 0x000000f1 failed with error -121 1492<7>[ 11.720995] unicam:det_id 0xffff need 0x2355 1493<3>[ 11.720999] ppr_cam i2c-front:10: unicam_detect err s_config. 1494<7>[ 11.727491] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1495<3>[ 11.727495] gmin_gpio1_ctrl. 1496<7>[ 11.728389] Entered cht_check_hs_detect 1497<3>[ 11.730746] gmin_gpio1_ctrl enter. 1498<7>[ 11.732008] jack insert/eject flag=0x0!!!! 1499<3>[ 11.734578] gmin_gpio0_ctrl. 1500<3>[ 11.737802] gmin_gpio0_ctrl enter. 1501<3>[ 11.744320] axp_regulator_set success. 1502<3>[ 11.748526] gmin_v1p8_ctrl PMIC_AXP. 1503<3>[ 11.755944] axp_regulator_set success. 1504<7>[ 11.760142] unicam:uni_probe : uni_data[1].name ov2680 1505<7>[ 11.760149] ################5########## entry uni_s_config line = 2113 1506<7>[ 11.760152] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1507<3>[ 11.760155] gmin_gpio1_ctrl. 1508<6>[ 11.763410] dwc3 dwc3.0.auto: otg_set_power: 2 mA 1509<6>[ 11.763419] intel-cht-otg intel-cht-otg.0: unknown notification 1510<6>[ 11.763424] process_cable_props: event:0, type:1, ma:1500 1511<6>[ 11.763430] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1512<6>[ 11.763435] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1513<3>[ 11.764819] gmin_gpio1_ctrl enter. 1514<3>[ 11.768904] gmin_gpio0_ctrl. 1515<3>[ 11.772207] gmin_gpio0_ctrl enter. 1516<3>[ 11.782364] gmin_v1p8_ctrl PMIC_AXP. 1517<3>[ 11.791784] axp_regulator_set success. 1518<3>[ 11.799699] axp_regulator_set success. 1519<7>[ 11.816944] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1520<3>[ 11.816954] gmin_gpio0_ctrl. 1521<3>[ 11.820186] gmin_gpio0_ctrl enter. 1522<3>[ 11.827548] gmin_gpio0_ctrl. 1523<3>[ 11.830805] gmin_gpio0_ctrl enter. 1524<6>[ 11.837636] trigger_algo:Algo_status:2 1525<6>[ 11.839577] android_work: sent uevent USB_STATE=CONNECTED 1526<3>[ 11.857346] gmin_gpio0_ctrl. 1527<3>[ 11.860630] gmin_gpio0_ctrl enter. 1528<6>[ 11.862333] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1529<3>[ 11.867338] gmin_gpio1_ctrl. 1530<3>[ 11.870599] gmin_gpio1_ctrl enter. 1531<6>[ 11.880350] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1532<6>[ 11.901341] ppr_cam i2c-front:10: camera pdata: port: 0 lanes: 1 order: 00000002 1533<7>[ 11.901351] unicam:i2c addr: 0x10 0x10 1534<7>[ 11.901356] unicam:uni_read_reg data_length:0x2 reg:0x300a 1535<7>[ 11.902604] unicam:det_id 0x2680 need 0x2680 1536<7>[ 11.902611] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1537<3>[ 11.902614] gmin_gpio1_ctrl. 1538<3>[ 11.906096] gmin_gpio1_ctrl enter. 1539<3>[ 11.910374] gmin_gpio0_ctrl. 1540<6>[ 11.913501] android_usb gadget: high-speed config #1: android 1541<6>[ 11.913534] dwc3 dwc3.0.auto: otg_set_power: 500 mA 1542<6>[ 11.913542] intel-cht-otg intel-cht-otg.0: watchdog stopped 1543<6>[ 11.913544] intel-cht-otg intel-cht-otg.0: unknown notification 1544<6>[ 11.913548] process_cable_props: event:0, type:1, ma:1500 1545<6>[ 11.913552] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1546<6>[ 11.913555] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1547<3>[ 11.914201] gmin_gpio0_ctrl enter. 1548<6>[ 11.918062] android_work: sent uevent USB_STATE=CONFIGURED 1549<3>[ 11.922158] axp_regulator_set success. 1550<3>[ 11.926399] gmin_v1p8_ctrl PMIC_AXP. 1551<3>[ 11.933857] axp_regulator_set success. 1552<6>[ 11.938062] ppr_cam i2c-front:10: register atomisp i2c module type 1 1553<7>[ 11.938068] unicam:use build in table 1554<7>[ 11.938072] unicam:uni_probe,af_type,0 1555<6>[ 11.938096] atomisp_acpi_i2c_add_device(): i is 4, adapter->name is Synopsys DesignWare I2C adapter, client->addr is 0x10, client->irq is -1, client->name is front:10, dev_name is front. 1556<6>[ 11.938117] atomisp_acpi_i2c_add_device(): ppr_cam has been registered and probe() successfully! 1557<6>[ 11.939037] atomisp-css2401a0_v21 0000:00:03.0: Subdev OVTI2680:01 successfully register 1558<6>[ 11.939045] atomisp-css2401a0_v21 0000:00:03.0: Subdev front:10 successfully register 1559<6>[ 12.148257] trigger_algo:Algo_status:2 1560<6>[ 12.173608] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1561<6>[ 12.191140] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1562<6>[ 12.509844] trigger_algo:Algo_status:2 1563<6>[ 12.535883] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1564<6>[ 12.554225] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1565<6>[ 12.671124] bio: create slab <bio-2> at 2 1566<6>[ 12.868156] trigger_algo:Algo_status:2 1567<6>[ 12.892328] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1568<6>[ 12.908405] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1569<4>[ 13.040165] EXT4-fs (dm-1): Ignoring removed nomblk_io_submit option 1570<6>[ 13.057939] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro 1571<7>[ 13.057968] SELinux: initialized (dev dm-1, type ext4), uses xattr 1572<14>[ 13.058220] fs_mgr: check_fs(): mount(/dev/block/dm-1,/data,ext4)=0 1573<14>[ 13.085596] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1 1574<14>[ 13.105452] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 1575<14>[ 13.105497] e2fsck: /dev/block/dm-1: clean, 1376/262144 files, 196241/1048576 blocks 1576<6>[ 13.110818] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,errors=panic 1577<7>[ 13.110842] SELinux: initialized (dev dm-1, type ext4), uses xattr 1578<14>[ 13.110910] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0 1579<6>[ 13.211411] zram: Cannot change disksize for initialized device 1580<11>[ 13.223081] fs_mgr: swapon failed for /dev/block/zram0 1581<7>[ 13.230600] no such pid 1582<7>[ 13.230625] no such pid 1583<11>[ 13.427826] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' 1584<11>[ 13.445228] init: cannot find '/system/bin/gnssCG2000', disabling 'gnssCG2000' 1585<7>[ 13.577146] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts 1586<4>[ 14.164980] ------------[ cut here ]------------ 1587<4>[ 14.170173] WARNING: CPU: 2 PID: 2598 at ../../../../../../../kernel/cht/drivers/gpu/drm/i915/intel_display.c:5239 valleyview_modeset_global_resources+0x59c/0x5b0() 1588<4>[ 14.186615] Modules linked in: hid_sensor_hub sens_col_core hid_heci_ish heci_ish heci vidt_driver 8723bs(O) atomisp_css2401a0_v21 cfg80211 gc0310 unicam_driver bt_lpm ov8858_driver videobuf_vmalloc 6lowpan_iphc videobuf_core ip6table_raw iptable_raw rfkill_gpio 1589<4>[ 14.212866] CPU: 2 PID: 2598 Comm: DrmDisplay Tainted: G W O 3.14.37-x86_64-L1-R517 #1 1590<4>[ 14.222519] Hardware name: cube i1-TFD/Cherry Trail CR, BIOS 5.11 06/26/2017 1591<7>[ 14.230412] 0000000000000009 ffff88007247bb10 ffffffff819f4853 0000000000000000 1592<7>[ 14.230423] ffff88007247bb48 ffffffff8108993d ffff880000010000 ffff880079df8000 1593<7>[ 14.230429] 0000000000000001 ffff880079df8308 000000000000010a ffff88007247bb58 1594<7>[ 14.230436] Call Trace: 1595<4>[ 14.230451] [<ffffffff819f4853>] dump_stack+0x4e/0x7a 1596<4>[ 14.236218] [<ffffffff8108993d>] warn_slowpath_common+0x7d/0xa0 1597<4>[ 14.242954] [<ffffffff81089a1a>] warn_slowpath_null+0x1a/0x20 1598<4>[ 14.249491] [<ffffffff81517ccc>] valleyview_modeset_global_resources+0x59c/0x5b0 1599<4>[ 14.257886] [<ffffffff815184b6>] __intel_set_mode+0x576/0x1660 1600<4>[ 14.264527] [<ffffffff8151d346>] intel_set_mode+0x16/0x40 1601<4>[ 14.270681] [<ffffffff8151e23d>] intel_crtc_set_config+0x8ed/0xdb0 1602<4>[ 14.277701] [<ffffffff8147b981>] drm_mode_set_config_internal+0x61/0xe0 1603<4>[ 14.285203] [<ffffffff8147f7f8>] drm_mode_setcrtc+0xd8/0x5d0 1604<4>[ 14.291640] [<ffffffff8146ffde>] drm_ioctl+0x2fe/0x5c0 1605<4>[ 14.297489] [<ffffffff8147f720>] ? drm_mode_setdisplay+0x90/0x90 1606<4>[ 14.304310] [<ffffffff814b0425>] i915_compat_ioctl+0x45/0x50 1607<4>[ 14.310741] [<ffffffff811f93af>] compat_sys_ioctl+0xbf/0x1370 1608<4>[ 14.317274] [<ffffffff81088b78>] ? do_fork+0x148/0x3b0 1609<4>[ 14.323126] [<ffffffff810f5ba1>] ? compat_SyS_futex+0x71/0x140 1610<4>[ 14.329756] [<ffffffff81379f7e>] ? trace_hardirqs_on_thunk+0x3a/0x3c 1611<4>[ 14.336967] [<ffffffff81a03f49>] ia32_do_call+0x13/0x13 1612<4>[ 14.342914] ---[ end trace d3b4470f580c75f4 ]--- 1613<36>[ 14.544596] type=1400 audit(1512467802.873:4): avc: denied { read } for pid=2681 comm="coreu" name="gt_cur_freq_mhz" dev="sysfs" ino=13354 scontext=u:r:coreu:s0 tcontext=u:object_r:sysfs_thermal_management:s0 tclass=file permissive=0 1614<36>[ 14.569472] type=1400 audit(1512467802.873:5): avc: denied { read write } for pid=2681 comm="coreu" name="gt_min_freq_mhz" dev="sysfs" ino=13356 scontext=u:r:coreu:s0 tcontext=u:object_r:sysfs_thermal_management:s0 tclass=file permissive=0 1615<36>[ 14.593391] type=1400 audit(1512467802.873:6): avc: denied { read write } for pid=2681 comm="coreu" name="gt_max_freq_mhz" dev="sysfs" ino=13355 scontext=u:r:coreu:s0 tcontext=u:object_r:sysfs_thermal_management:s0 tclass=file permissive=0 1616<6>[ 14.628834] atomisp-css2401a0_v21 0000:00:03.0: Refused to change power state, currently in D3 1617<7>[ 14.636295] isys dma store at addr(0xcd408) val(0) 1618<7>[ 14.637415] 1619<7>[ 14.637415] ##### entry uni_s_parm:run_mode :0 1620<7>[ 14.637470] ################5########## entry uni_g_ctrl line = 3052 1621<7>[ 14.637475] ################5########## entry uni_g_ctrl line = 3052 1622<7>[ 14.637481] ################5########## entry uni_s_power 1623<7>[ 14.637484] unicam:uni_s_power,off 1624<7>[ 14.637488] ################5########## entry gpio_ctrl hw_reset_gpio_polarity 1 hw_reset_gpio_polarity 0 1625<3>[ 14.637492] gmin_gpio1_ctrl. 1626<3>[ 14.641203] gmin_gpio1_ctrl enter. 1627<3>[ 14.645041] gmin_gpio0_ctrl. 1628<3>[ 14.648658] gmin_gpio0_ctrl enter. 1629<3>[ 15.128828] [drm:drm_mode_obj_set_property_ioctl] *ERROR* CRTC from connector,CRTC={id=6 props=3} 1630<3>[ 15.160094] [drm:vlv_set_ddr_dvfs] *ERROR* timed out for punit change req 1631<3>[ 15.171805] [drm:vlv_set_ddr_dvfs] *ERROR* timed out for punit change req 1632<3>[ 15.210736] [drm:vlv_set_ddr_dvfs] *ERROR* timed out for punit change req 1633<7>[ 15.560402] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 1634<6>[ 17.315255] warning: `main' uses 32-bit capabilities (legacy support in use) 1635<7>[ 19.303403] kionix_accel_set_enable........RU.....en = 0 1636<5>[ 20.223535] iTCO_wdt: iTCO_wdt_ping 1637<6>[ 23.598208] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj: 1638<6>[ 23.598218] lowmemorykiller: oom_adj 0 => oom_score_adj 0 1639<6>[ 23.598221] lowmemorykiller: oom_adj 1 => oom_score_adj 58 1640<6>[ 23.598224] lowmemorykiller: oom_adj 2 => oom_score_adj 117 1641<6>[ 23.598226] lowmemorykiller: oom_adj 3 => oom_score_adj 176 1642<6>[ 23.598229] lowmemorykiller: oom_adj 9 => oom_score_adj 529 1643<6>[ 23.598231] lowmemorykiller: oom_adj 15 => oom_score_adj 1000 1644<36>[ 24.246809] type=1400 audit(1512467812.577:7): avc: denied { getattr } for pid=2983 comm="vold" path="/config" dev="mmcblk0p11" ino=2 scontext=u:r:vold:s0 tcontext=u:object_r:config_file:s0 tclass=dir permissive=0 1645<6>[ 24.460018] acc_open 1646<6>[ 24.460039] acc_release 1647<7>[ 24.774602] [linhong]: usbdev_open 1648<6>[ 24.778488] wgq[xhci_resume-1017] hibernated[0] 1649<6>[ 24.778681] wgq[xhci_bus_resume-1257] 1650<6>[ 24.778715] wgq[hub_resume-3574] 1651<3>[ 24.779118] usb usb2: opened by process 3011: UsbService host 1652<7>[ 24.786045] [linhong]: usbdev_release 1653<6>[ 24.786063] wgq[hub_suspend-3520] msg[1] 1654<6>[ 24.786195] wgq[xhci_bus_suspend-1171] 1655<6>[ 24.786243] [xhci_pci_suspend], xhci_root_hub pointer:0x79c3e000 1656<6>[ 24.786250] wgq[xhci_suspend-932] do_wakeup[1] 1657<7>[ 24.786688] [linhong]: usbdev_open 1658<6>[ 24.794298] wgq[xhci_resume-1017] hibernated[0] 1659<6>[ 24.895140] wgq[xhci_bus_resume-1257] 1660<6>[ 24.895181] wgq[hub_resume-3574] 1661<3>[ 24.895355] usb usb1: opened by process 3011: UsbService host 1662<7>[ 24.902338] [linhong]: usbdev_release 1663<6>[ 24.902361] wgq[hub_suspend-3520] msg[1] 1664<6>[ 24.903923] wgq[xhci_bus_suspend-1171] 1665<6>[ 24.903982] [xhci_pci_suspend], xhci_root_hub pointer:0x79c3e000 1666<6>[ 24.903989] wgq[xhci_suspend-932] do_wakeup[1] 1667<6>[ 25.949335] chn:SYSTEMP0 adc val:320 1668<6>[ 25.949672] chn:SYSTEMP0 conv adc val:320 1669<6>[ 26.117695] dollar_cove_charger dollar_cove_charger: pmic_chrg_enable_charging: enable=1 1670<6>[ 26.238469] trigger_algo:Algo_status:2 1671<6>[ 26.250956] binder: 2673:3096 refcount change on invalid ref 5 1672<6>[ 26.252821] binder: 2673:2971 refcount change on invalid ref 5 1673<6>[ 26.252831] binder: 2673:2971 refcount change on invalid ref 5 1674<3>[ 26.258739] binder: transaction release 2744 bad handle 5 1675<6>[ 26.264846] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1676<6>[ 26.281796] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1677<6>[ 26.565083] trigger_algo:Algo_status:2 1678<6>[ 26.590600] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1679<6>[ 26.607608] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1680<11>[ 27.376651] init: Warning! Service mkaddr needs a SELinux domain defined; please fix! 1681<11>[ 27.387817] init: Warning! Service mkipaddr needs a SELinux domain defined; please fix! 1682<7>[ 28.401308] kionix_accel_set_enable........RU.....en = 1 1683<5>[ 30.222817] iTCO_wdt: iTCO_wdt_ping 1684<36>[ 35.548298] type=1400 audit(1512467823.881:8): avc: denied { ptrace } for pid=2676 comm="debuggerd" scontext=u:r:debuggerd:s0 tcontext=u:r:healthd:s0 tclass=process permissive=0 1685<6>[ 36.296845] binder: undelivered transaction 13691 1686<6>[ 37.588824] mtp_open 1687<11>[ 37.780617] init: untracked pid 3723 killed by signal 9 1688<7>[ 38.812023] kionix_accel_set_enable........RU.....en = 0 1689<3>[ 39.405166] [drm:drm_mode_obj_set_property_ioctl] *ERROR* CRTC from connector,CRTC={id=6 props=3} 1690<5>[ 40.222002] iTCO_wdt: iTCO_wdt_ping 1691<7>[ 41.092837] kionix_accel_set_enable........RU.....en = 1 1692<7>[ 44.350310] kionix_accel_set_enable........RU.....en = 0 1693<7>[ 49.435740] kionix_accel_set_enable........RU.....en = 1 1694<5>[ 50.221513] iTCO_wdt: iTCO_wdt_ping 1695<3>[ 52.119635] [drm:drm_mode_obj_set_property_ioctl] *ERROR* CRTC from connector,CRTC={id=6 props=3} 1696<7>[ 52.702181] kionix_accel_set_enable........RU.....en = 0 1697<3>[ 53.054096] [drm:drm_mode_obj_set_property_ioctl] *ERROR* CRTC from connector,CRTC={id=6 props=3} 1698<3>[ 53.069344] [drm:vlv_set_ddr_dvfs] *ERROR* timed out for punit change req 1699<3>[ 53.102175] [drm:vlv_set_ddr_dvfs] *ERROR* timed out for punit change req 1700<7>[ 53.118943] kionix_accel_set_enable........RU.....en = 1 1701<6>[ 55.948487] chn:SYSTEMP0 adc val:310 1702<6>[ 55.950204] chn:SYSTEMP0 conv adc val:310 1703<6>[ 59.194321] snd_intel_sst: FW Version 01.0b.00.0f 1704<3>[ 59.195076] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1705<3>[ 59.202271] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1706<6>[ 59.215589] DAI FMT status =2 1707<7>[ 59.215599] Platform clk turned ON 1708<7>[ 59.215609] set_sys_clk sys_clk=1 1709<7>[ 59.218398] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1710<7>[ 59.218409] nau8824 i2c-10508824:00: nau8824_hw_params 1711<7>[ 59.218414] nau8824 i2c-10508824:00: ##- Data length: 2 1712<6>[ 59.220532] hw_params status =2 1713<7>[ 59.221128] !!! Platform clk turned ON 1714<7>[ 59.221138] set_sys_clk sys_clk=1 1715<7>[ 59.223324] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1716<7>[ 59.223342] nau8824 i2c-10508824:00: nau8824_hw_params 1717<7>[ 59.223346] nau8824 i2c-10508824:00: ##- Data length: 6 1718<6>[ 59.226939] hw_params status =a 1719<6>[ 59.239470] snd_intel_sst: Start for str 1 pipe 0x90 1720<5>[ 60.221558] iTCO_wdt: iTCO_wdt_ping 1721<6>[ 62.263094] snd_intel_sst: Stop for str 1 pipe 0x90 1722<6>[ 62.264387] snd_intel_sst: Free for str 1 pipe 0x90 1723<7>[ 62.273424] !!! Platform clk turned OFF 1724<7>[ 62.273464] set_sys_clk sys_clk=0 1725<3>[ 63.537787] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1726<3>[ 63.543721] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1727<6>[ 63.554928] DAI FMT status =2 1728<7>[ 63.554939] Platform clk turned ON 1729<7>[ 63.554953] set_sys_clk sys_clk=1 1730<7>[ 63.556822] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1731<7>[ 63.556832] nau8824 i2c-10508824:00: nau8824_hw_params 1732<7>[ 63.556836] nau8824 i2c-10508824:00: ##- Data length: 2 1733<6>[ 63.558575] hw_params status =2 1734<7>[ 63.559018] !!! Platform clk turned ON 1735<7>[ 63.559027] set_sys_clk sys_clk=1 1736<7>[ 63.560606] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1737<7>[ 63.560617] nau8824 i2c-10508824:00: nau8824_hw_params 1738<7>[ 63.560622] nau8824 i2c-10508824:00: ##- Data length: 6 1739<6>[ 63.562342] hw_params status =a 1740<6>[ 63.576037] snd_intel_sst: Start for str 1 pipe 0x90 1741<6>[ 66.598887] snd_intel_sst: Stop for str 1 pipe 0x90 1742<6>[ 66.600204] snd_intel_sst: Free for str 1 pipe 0x90 1743<7>[ 66.608031] !!! Platform clk turned OFF 1744<7>[ 66.608059] set_sys_clk sys_clk=0 1745<3>[ 67.504464] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1746<3>[ 67.510726] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1747<6>[ 67.524158] DAI FMT status =2 1748<7>[ 67.524174] Platform clk turned ON 1749<7>[ 67.524189] set_sys_clk sys_clk=1 1750<7>[ 67.526002] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1751<7>[ 67.526017] nau8824 i2c-10508824:00: nau8824_hw_params 1752<7>[ 67.526022] nau8824 i2c-10508824:00: ##- Data length: 2 1753<6>[ 67.527552] hw_params status =2 1754<7>[ 67.528283] !!! Platform clk turned ON 1755<7>[ 67.528299] set_sys_clk sys_clk=1 1756<7>[ 67.530635] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1757<7>[ 67.530651] nau8824 i2c-10508824:00: nau8824_hw_params 1758<7>[ 67.530655] nau8824 i2c-10508824:00: ##- Data length: 6 1759<6>[ 67.533503] hw_params status =a 1760<6>[ 67.548368] snd_intel_sst: Start for str 1 pipe 0x90 1761<6>[ 67.727352] trigger_algo:Algo_status:2 1762<6>[ 67.749867] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1763<6>[ 67.764939] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1764<6>[ 68.063391] trigger_algo:Algo_status:2 1765<6>[ 68.095738] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1766<6>[ 68.112741] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1767<5>[ 70.221061] iTCO_wdt: iTCO_wdt_ping 1768<6>[ 70.567604] snd_intel_sst: Stop for str 1 pipe 0x90 1769<6>[ 70.568898] snd_intel_sst: Free for str 1 pipe 0x90 1770<7>[ 70.575023] !!! Platform clk turned OFF 1771<7>[ 70.575042] set_sys_clk sys_clk=0 1772<3>[ 70.622632] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1773<3>[ 70.628681] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1774<6>[ 70.639908] DAI FMT status =2 1775<7>[ 70.639918] Platform clk turned ON 1776<7>[ 70.639930] set_sys_clk sys_clk=1 1777<7>[ 70.642320] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1778<7>[ 70.642329] nau8824 i2c-10508824:00: nau8824_hw_params 1779<7>[ 70.642334] nau8824 i2c-10508824:00: ##- Data length: 2 1780<6>[ 70.643923] hw_params status =2 1781<7>[ 70.644262] !!! Platform clk turned ON 1782<7>[ 70.644269] set_sys_clk sys_clk=1 1783<7>[ 70.646513] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1784<7>[ 70.646525] nau8824 i2c-10508824:00: nau8824_hw_params 1785<7>[ 70.646529] nau8824 i2c-10508824:00: ##- Data length: 6 1786<6>[ 70.648755] hw_params status =a 1787<6>[ 70.663323] snd_intel_sst: Start for str 1 pipe 0x90 1788<6>[ 73.674344] snd_intel_sst: Stop for str 1 pipe 0x90 1789<6>[ 73.676229] snd_intel_sst: Free for str 1 pipe 0x90 1790<7>[ 73.683226] !!! Platform clk turned OFF 1791<7>[ 73.683254] set_sys_clk sys_clk=0 1792<6>[ 76.980654] snd_intel_sst: FW Version 01.0b.00.0f 1793<3>[ 76.981120] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1794<3>[ 76.986976] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1795<6>[ 76.998068] DAI FMT status =2 1796<7>[ 76.998077] Platform clk turned ON 1797<7>[ 76.998086] set_sys_clk sys_clk=1 1798<7>[ 77.000313] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1799<7>[ 77.000320] nau8824 i2c-10508824:00: nau8824_hw_params 1800<7>[ 77.000324] nau8824 i2c-10508824:00: ##- Data length: 2 1801<6>[ 77.001773] hw_params status =2 1802<7>[ 77.002555] !!! Platform clk turned ON 1803<7>[ 77.002562] set_sys_clk sys_clk=1 1804<7>[ 77.004758] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1805<7>[ 77.004773] nau8824 i2c-10508824:00: nau8824_hw_params 1806<7>[ 77.004777] nau8824 i2c-10508824:00: ##- Data length: 6 1807<6>[ 77.006699] hw_params status =a 1808<6>[ 77.019051] snd_intel_sst: Start for str 1 pipe 0x90 1809<5>[ 80.221197] iTCO_wdt: iTCO_wdt_ping 1810<6>[ 84.107520] android_usb: disabling function mtp 1811<3>[ 84.107610] dwc3 dwc3.0.auto: request ffff88007a03e600 was not queued to ep0out 1812<6>[ 84.109766] mtp_release 1813<6>[ 84.117024] android_work: sent uevent USB_STATE=DISCONNECTED 1814<3>[ 84.172372] android_usb: already disabled 1815<6>[ 84.177226] android_usb: selecting functions: mtp,adb 1816<6>[ 84.177278] android_usb: enabling function mtp 1817<6>[ 84.177282] android_usb: enabling function ffs 1818<6>[ 84.177285] android_usb: wait ffs to be ready 1819<6>[ 84.181796] read descriptors 1820<6>[ 84.181817] read strings 1821<6>[ 84.181843] mtp_bind_config 1822<6>[ 84.286375] dwc3 dwc3.0.auto: otg_set_power: 2 mA 1823<6>[ 84.286389] intel-cht-otg intel-cht-otg.0: unknown notification 1824<6>[ 84.286395] process_cable_props: event:0, type:1, ma:1500 1825<6>[ 84.286400] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1826<6>[ 84.286405] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1827<6>[ 84.382124] dwc3 dwc3.0.auto: otg_set_power: 2 mA 1828<6>[ 84.382141] intel-cht-otg intel-cht-otg.0: unknown notification 1829<6>[ 84.382147] process_cable_props: event:0, type:1, ma:1500 1830<6>[ 84.382155] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1831<6>[ 84.382160] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1832<6>[ 84.453168] android_work: sent uevent USB_STATE=CONNECTED 1833<6>[ 84.526105] android_usb gadget: high-speed config #1: android 1834<6>[ 84.526183] dwc3 dwc3.0.auto: otg_set_power: 500 mA 1835<6>[ 84.526195] intel-cht-otg intel-cht-otg.0: unknown notification 1836<6>[ 84.526201] process_cable_props: event:0, type:1, ma:1500 1837<6>[ 84.526208] dollar_cove_pwrsrc dollar_cove_pwrsrc: [OTG notification]evt:4 val:1500 1838<6>[ 84.526214] intel-cht-otg intel-cht-otg.0: Draw 1500 mA 1839<6>[ 84.526973] android_work: sent uevent USB_STATE=CONFIGURED 1840<6>[ 84.538908] mtp_open 1841<6>[ 85.950034] chn:SYSTEMP0 adc val:2e0 1842<6>[ 85.951738] chn:SYSTEMP0 conv adc val:2e0 1843<6>[ 87.174717] snd_intel_sst: Stop for str 1 pipe 0x90 1844<6>[ 87.176491] snd_intel_sst: Free for str 1 pipe 0x90 1845<7>[ 87.183586] !!! Platform clk turned OFF 1846<7>[ 87.183611] set_sys_clk sys_clk=0 1847<5>[ 90.220393] iTCO_wdt: iTCO_wdt_ping 1848<6>[ 90.265296] snd_intel_sst: FW Version 01.0b.00.0f 1849<3>[ 90.266362] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1850<3>[ 90.272284] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1851<6>[ 90.283762] DAI FMT status =2 1852<7>[ 90.283778] Platform clk turned ON 1853<7>[ 90.283792] set_sys_clk sys_clk=1 1854<7>[ 90.285702] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1855<7>[ 90.285714] nau8824 i2c-10508824:00: nau8824_hw_params 1856<7>[ 90.285720] nau8824 i2c-10508824:00: ##- Data length: 2 1857<6>[ 90.287401] hw_params status =2 1858<7>[ 90.287970] !!! Platform clk turned ON 1859<7>[ 90.287977] set_sys_clk sys_clk=1 1860<7>[ 90.289960] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1861<7>[ 90.289970] nau8824 i2c-10508824:00: nau8824_hw_params 1862<7>[ 90.289975] nau8824 i2c-10508824:00: ##- Data length: 6 1863<6>[ 90.292855] hw_params status =a 1864<6>[ 90.307953] snd_intel_sst: Start for str 1 pipe 0x90 1865<6>[ 94.270789] snd_intel_sst: Stop for str 1 pipe 0x90 1866<6>[ 94.272063] snd_intel_sst: Free for str 1 pipe 0x90 1867<7>[ 94.276904] !!! Platform clk turned OFF 1868<7>[ 94.276915] set_sys_clk sys_clk=0 1869<3>[ 94.676185] cht_cr_nau88l24: cht_aif1_hw_params: Enter. 1870<3>[ 94.682303] cht_cr_nau88l24: cht_aif1_hw_params: will configration sysclk. 1871<6>[ 94.692954] DAI FMT status =2 1872<7>[ 94.692967] Platform clk turned ON 1873<7>[ 94.692979] set_sys_clk sys_clk=1 1874<7>[ 94.695252] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1875<7>[ 94.695264] nau8824 i2c-10508824:00: nau8824_hw_params 1876<7>[ 94.695269] nau8824 i2c-10508824:00: ##- Data length: 2 1877<6>[ 94.696768] hw_params status =2 1878<7>[ 94.697306] !!! Platform clk turned ON 1879<7>[ 94.697332] set_sys_clk sys_clk=1 1880<7>[ 94.699693] nau8824 i2c-10508824:00: nau8824_set_sysclk: input freq = 25000000 divider = 1 1881<7>[ 94.699703] nau8824 i2c-10508824:00: nau8824_hw_params 1882<7>[ 94.699708] nau8824 i2c-10508824:00: ##- Data length: 6 1883<6>[ 94.701835] hw_params status =a 1884<6>[ 94.716045] snd_intel_sst: Start for str 1 pipe 0x90 1885<6>[ 97.737879] snd_intel_sst: Stop for str 1 pipe 0x90 1886<6>[ 97.740133] snd_intel_sst: Free for str 1 pipe 0x90 1887<7>[ 97.747758] !!! Platform clk turned OFF 1888<7>[ 97.747789] set_sys_clk sys_clk=0 1889<5>[ 100.218757] iTCO_wdt: iTCO_wdt_ping 1890<5>[ 110.217988] iTCO_wdt: iTCO_wdt_ping 1891<6>[ 115.951640] chn:SYSTEMP0 adc val:2e0 1892<6>[ 115.953000] chn:SYSTEMP0 conv adc val:2e0 1893<5>[ 120.217547] iTCO_wdt: iTCO_wdt_ping 1894<6>[ 127.749533] trigger_algo:Algo_status:2 1895<6>[ 127.771333] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1896<6>[ 127.786332] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1897<6>[ 128.068829] trigger_algo:Algo_status:2 1898<6>[ 128.090398] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cc: cc=1000 1899<6>[ 128.105275] dollar_cove_charger dollar_cove_charger: pmic_chrg_set_cv: cv=4350 1900<5>[ 130.216768] iTCO_wdt: iTCO_wdt_ping 1901<5>[ 140.215724] iTCO_wdt: iTCO_wdt_ping 1902<6>[ 145.953228] chn:SYSTEMP0 adc val:2d0 1903<6>[ 145.954774] chn:SYSTEMP0 conv adc val:2d0 1904<5>[ 150.214258] iTCO_wdt: iTCO_wdt_ping 1905<5>[ 160.213489] iTCO_wdt: iTCO_wdt_ping 1906<5>[ 170.211977] iTCO_wdt: iTCO_wdt_ping 1907<6>[ 175.953300] chn:SYSTEMP0 adc val:2e0 1908<6>[ 175.954762] chn:SYSTEMP0 conv adc val:2e0 1909<5>[ 180.211202] iTCO_wdt: iTCO_wdt_ping 1910<5>[ 190.210958] iTCO_wdt: iTCO_wdt_ping 1911