| /linux-6.14.4/Documentation/hwmon/ |
| D | lochnagar.rst | 47 in3_input Measured voltage for VDDCORE DSP (milliVolts)
48 in3_label "VDDCORE DSP"
49 curr4_input Measured current for VDDCORE DSP (milliAmps)
50 curr4_label "VDDCORE DSP"
51 power4_average Measured average power for VDDCORE DSP (microWatts)
53 power4_label "VDDCORE DSP"
66 in6_input Measured voltage for VDDCORE CDC (milliVolts)
67 in6_label "VDDCORE CDC"
68 curr7_input Measured current for VDDCORE CDC (milliAmps)
69 curr7_label "VDDCORE CDC"
[all …]
|
| /linux-6.14.4/Documentation/devicetree/bindings/display/bridge/ |
| D | samsung,mipi-dsim.yaml | 66 vddcore-supply:
172 - vddcore-supply
192 - vddcore-supply
212 - vddcore-supply
232 - vddcore-supply
262 vddcore-supply = <&ldo6_reg>;
|
| /linux-6.14.4/arch/arm/boot/dts/st/ |
| D | stm32mp157a-microgea-stm32mp1.dtsi | 66 vddcore: regulator-vddcore { label
68 regulator-name = "vddcore";
|
| D | stm32mp157a-icore-stm32mp1.dtsi | 58 vddcore: regulator-vddcore { label
60 regulator-name = "vddcore";
|
| D | stm32mp15xx-osd32.dtsi | 79 vddcore: buck1 { label
80 regulator-name = "vddcore";
|
| D | stm32mp15xx-dhcor-som.dtsi | 102 vddcore: buck1 { label
103 regulator-name = "vddcore";
|
| D | stm32mp157c-odyssey-som.dtsi | 103 vddcore: buck1 { label
104 regulator-name = "vddcore";
|
| D | stm32mp157a-stinger96.dtsi | 124 vddcore: buck1 { label
125 regulator-name = "vddcore";
|
| D | stm32mp13xx-dhcor-som.dtsi | 113 vddcore: buck4 { /* VDD_CORE_1V2 */ label
114 regulator-name = "vddcore";
|
| D | stm32mp157c-ed1.dts | 201 vddcore: buck1 { label
202 regulator-name = "vddcore";
|
| D | stm32mp157c-emstamp-argon.dtsi | 225 vddcore: buck1 { label
226 regulator-name = "vddcore";
|
| D | stm32mp15xx-dhcom-som.dtsi | 284 vddcore: buck1 { label
285 regulator-name = "vddcore";
|
| D | stm32mp157c-phycore-stm32mp15-som.dtsi | 259 vddcore: buck1 { label
260 regulator-name = "vddcore";
|
| /linux-6.14.4/Documentation/devicetree/bindings/media/ |
| D | samsung,exynos4210-csis.yaml | 65 vddcore-supply:
112 - vddcore-supply
153 vddcore-supply = <&ldo8_reg>;
|
| /linux-6.14.4/Documentation/devicetree/bindings/media/i2c/ |
| D | thine,thp7312.yaml | 52 vddcore-supply:
160 - vddcore-supply
191 vddcore-supply = <&vsys_v4p2>;
|
| /linux-6.14.4/drivers/regulator/ |
| D | lochnagar-regulator.c | 194 .name = "VDDCORE",
201 .of_match = of_match_ptr("VDDCORE"),
233 .compatible = "cirrus,lochnagar2-vddcore",
|
| /linux-6.14.4/Documentation/devicetree/bindings/mfd/ |
| D | cirrus,lochnagar.yaml | 141 VDDCORE:
143 Initialisation data for the VDDCORE regulator, which supplies the
151 - cirrus,lochnagar2-vddcore
|
| /linux-6.14.4/Documentation/devicetree/bindings/soc/imx/ |
| D | fsl,imx-anatop.yaml | 47 "regulator-((1p1)|(2p5)|(3p0)|(vdd1p0d)|(vdd1p2)|(vddcore)|(vddpcie)|(vddpu)|(vddsoc))$":
102 reg_arm: regulator-vddcore {
|
| /linux-6.14.4/Documentation/devicetree/bindings/power/reset/ |
| D | atmel,at91sam9260-shdwc.yaml | 14 and VDDCORE and the wake-up detection on debounced input lines.
|
| D | atmel,sama5d2-shdwc.yaml | 14 and VDDCORE and the wake-up detection on debounced input lines.
|
| /linux-6.14.4/arch/arm/boot/dts/microchip/ |
| D | at91-sam9x75_curiosity.dts | 140 vddcore: VDD_CORE { label
236 label = "VDDCORE";
|
| D | at91-sama7g54_curiosity.dts | 210 label = "VDDCORE";
279 vddcore: VDD_CORE { label
|
| /linux-6.14.4/drivers/hwmon/ |
| D | lochnagar-hwmon.c | 34 "VDDCORE DSP",
37 "VDDCORE CDC",
|
| /linux-6.14.4/drivers/sbus/char/ |
| D | envctrl.c | 746 if (!(strcmp(chnl_desc,"vddcore,cpu0")) || in envctrl_set_mon()
747 !(strcmp(chnl_desc,"vddcore,cpu1")) || in envctrl_set_mon()
748 !(strcmp(chnl_desc,"vddcore,cpu2")) || in envctrl_set_mon()
749 !(strcmp(chnl_desc,"vddcore,cpu3"))) in envctrl_set_mon()
|
| /linux-6.14.4/Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-adc.yaml | 362 Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
603 label = "vddcore";
|