Searched +full:mbox +full:- +full:names (Results 1 – 25 of 224) sorted by relevance
123456789
/linux-6.14.4/arch/arm/boot/dts/ti/omap/ |
D | dra74x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ 16 compatible = "arm,cortex-a15"; 18 operating-points-v2 = <&cpu0_opp_table>; 21 clock-names = "cpu"; 23 clock-latency = <300000>; /* From omap-cpufreq driver */ 26 #cooling-cells = <2>; /* min followed by max */ 28 vbb-supply = <&abb_mpu>; 40 compatible = "arm,cortex-a15-pmu"; 41 interrupt-parent = <&wakeupgen>; [all …]
|
D | dra72x.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ 20 compatible = "arm,cortex-a15-pmu"; 21 interrupt-parent = <&wakeupgen>; 27 target-module@5b000 { /* 0x4845b000, ap 59 46.0 */ 28 compatible = "ti,sysc-omap4", "ti,sysc"; 31 reg-names = "rev", "sysc"; 32 ti,sysc-midle = <SYSC_IDLE_FORCE>, 34 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 37 clock-names = "fck"; [all …]
|
D | omap2420.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 15 compatible = "ti,omap2-l4", "simple-bus"; 16 #address-cells = <1>; 17 #size-cells = <1>; 21 compatible = "ti,omap2-prcm"; 25 #address-cells = <1>; 26 #size-cells = <0>; 34 compatible = "ti,omap2-scm", "simple-bus"; 36 #address-cells = <1>; [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/ti/ |
D | k3-j721s2-main.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/phy/phy-cadence.h> 9 #include <dt-bindings/phy/phy-ti.h> 12 serdes_refclk: clock-cmnrefclk { 13 #clock-cells = <0>; 14 compatible = "fixed-clock"; 15 clock-frequency = <0>; 21 compatible = "mmio-sram"; 23 #address-cells = <1>; [all …]
|
D | k3-j784s4-j742s2-main-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 #include <dt-bindings/mux/mux.h> 9 #include <dt-bindings/phy/phy.h> 10 #include <dt-bindings/phy/phy-ti.h> 12 #include "k3-serdes.h" 15 serdes_refclk: clock-serdes { 16 #clock-cells = <0>; 17 compatible = "fixed-clock"; 29 compatible = "mmio-sram"; [all …]
|
D | k3-j721e-beagleboneai64.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * https://beagleboard.org/ai-64 4 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 5 * Copyright (C) 2022-2024 Jason Kridner, BeagleBoard.org Foundation 6 * Copyright (C) 2022-2024 Robert Nelson, BeagleBoard.org Foundation 9 /dts-v1/; 11 #include "k3-j721e.dtsi" 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/input/input.h> 14 #include <dt-bindings/leds/common.h> [all …]
|
D | k3-am65-main.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ 7 #include <dt-bindings/phy/phy-am654-serdes.h> 11 compatible = "mmio-sram"; 13 #address-cells = <1>; 14 #size-cells = <1>; 17 atf-sram@0 { 21 sysfw-sram@f0000 { 25 l3cache-sram@100000 { 30 gic500: interrupt-controller@1800000 { [all …]
|
D | k3-am69-sk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 9 /dts-v1/; 11 #include <dt-bindings/net/ti-dp83867.h> 12 #include <dt-bindings/gpio/gpio.h> 13 #include "k3-j784s4.dtsi" 16 compatible = "ti,am69-sk", "ti,j784s4"; 20 stdout-path = "serial2:115200n8"; 36 bootph-all; 42 reserved_memory: reserved-memory { [all …]
|
D | k3-j784s4-j742s2-evm-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/ 10 stdout-path = "serial2:115200n8"; 25 reserved_memory: reserved-memory { 26 #address-cells = <2>; 27 #size-cells = <2>; 32 no-map; 35 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 36 compatible = "shared-dma-pool"; 38 no-map; [all …]
|
D | k3-j7200-main.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ 9 serdes_refclk: serdes-refclk { 10 #clock-cells = <0>; 11 compatible = "fixed-clock"; 17 compatible = "mmio-sram"; 19 #address-cells = <1>; 20 #size-cells = <1>; 23 atf-sram@0 { 28 scm_conf: scm-conf@100000 { [all …]
|
D | k3-j721e-sk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ 5 * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM 8 /dts-v1/; 10 #include "k3-j721e.dtsi" 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/input/input.h> 13 #include <dt-bindings/net/ti-dp83867.h> 16 compatible = "ti,j721e-sk", "ti,j721e"; 29 stdout-path = "serial2:115200n8"; [all …]
|
D | k3-am67a-beagley-ai.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * https://beagley-ai.org/ 5 * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ 9 /dts-v1/; 11 #include <dt-bindings/leds/common.h> 12 #include <dt-bindings/net/ti-dp83867.h> 13 #include "k3-j722s.dtsi" 16 compatible = "beagle,am67a-beagley-ai", "ti,j722s"; 17 model = "BeagleBoard.org BeagleY-AI"; 27 stdout-path = &main_uart0; [all …]
|
D | k3-am64-phycore-som.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2021-2024 PHYTEC America, LLC - https://www.phytec.com 6 * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH 10 * https://www.phytec.com/product/phycore-am64x 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/leds/common.h> 15 #include <dt-bindings/net/ti-dp83867.h> 18 model = "PHYTEC phyCORE-AM64x"; 19 compatible = "phytec,am64-phycore-som", "ti,am642"; 32 reserved_memory: reserved-memory { [all …]
|
D | k3-am642-sk.dts | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 3 * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ 6 /dts-v1/; 8 #include <dt-bindings/phy/phy.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/net/ti-dp83867.h> 11 #include <dt-bindings/leds/common.h> 12 #include "k3-am642.dtsi" 14 #include "k3-serdes.h" 17 compatible = "ti,am642-sk", "ti,am642"; [all …]
|
D | k3-j721s2-som-p0.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 5 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/ 8 /dts-v1/; 10 #include "k3-j721s2.dtsi" 11 #include <dt-bindings/gpio/gpio.h> 16 bootph-all; 23 reserved_memory: reserved-memory { 24 #address-cells = <2>; 25 #size-cells = <2>; 31 no-map; [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/mailbox/ |
D | thead,th1520-mbox.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mailbox/thead,th1520-mbox.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: T-head TH1520 Mailbox Controller 10 The T-head mailbox controller enables communication and coordination between 16 - Michal Wilczynski <[email protected]> 20 const: thead,th1520-mbox 24 - description: Clock for the local mailbox 25 - description: Clock for remote ICU 0 [all …]
|
D | altera-mailbox.txt | 5 - compatible : "altr,mailbox-1.0". 6 - reg : physical base address of the mailbox and length of 8 - #mbox-cells: Common mailbox binding property to identify the number 12 - interrupts : interrupt number. The interrupt specifier format 17 compatible = "altr,mailbox-1.0"; 19 interrupt-parent = < &gic_0 >; 21 #mbox-cells = <1>; 25 compatible = "altr,mailbox-1.0"; 27 interrupt-parent = < &gic_0 >; 29 #mbox-cells = <1>; [all …]
|
D | google,gs101-mbox.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/mailbox/google,gs101-mbox.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 11 - Tudor Ambarus <[email protected]> 23 const: google,gs101-mbox 31 clock-names: 33 - const: pclk 39 '#mbox-cells': 43 - compatible [all …]
|
D | hisilicon,hi6220-mailbox.txt | 13 -------------------- 14 - compatible: Shall be "hisilicon,hi6220-mbox" 15 - reg: Contains the mailbox register address range (base 19 - #mbox-cells: Common mailbox binding property to identify the number 28 - interrupts: Contains the interrupt information for the mailbox 33 -------------------- 34 - hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver 40 -------- 43 compatible = "hisilicon,hi6220-mbox"; 46 interrupt-parent = <&gic>; [all …]
|
D | arm,mhu.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jassi Brar <[email protected]> 13 The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 22 interrupt signal using a 32-bit register, with all 32-bits logically ORed 28 interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote 37 - arm,mhu 38 - arm,mhu-doorbell 40 - compatible [all …]
|
D | sprd-mailbox.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Orson Zhai <[email protected]> 11 - Baolin Wang <[email protected]> 12 - Chunyan Zhang <[email protected]> 17 - sprd,sc9860-mailbox 18 - sprd,sc9863a-mailbox 22 - description: inbox registers' base address [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/media/ |
D | amphion,vpu.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Ming Qian <[email protected]> 11 - Shijie Qin <[email protected]> 13 description: |- 19 pattern: "^vpu@[0-9a-f]+$" 23 - enum: 24 - nxp,imx8qm-vpu 25 - nxp,imx8qxp-vpu [all …]
|
/linux-6.14.4/Documentation/devicetree/bindings/dsp/ |
D | fsl,dsp.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Daniel Baluta <[email protected]> 11 - Shengjiu Wang <[email protected]> 15 advanced pre- and post- audio processing. 20 - fsl,imx8qxp-dsp 21 - fsl,imx8qm-dsp 22 - fsl,imx8mp-dsp 23 - fsl,imx8ulp-dsp [all …]
|
/linux-6.14.4/arch/arm64/boot/dts/freescale/ |
D | imx8-ss-vpu.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 8 #address-cells = <1>; 9 #size-cells = <1>; 12 power-domains = <&pd IMX_SC_R_VPU>; 16 compatible = "fsl,imx6sx-mu"; 19 #mbox-cells = <2>; 20 power-domains = <&pd IMX_SC_R_VPU_MU_0>; 25 compatible = "fsl,imx6sx-mu"; 28 #mbox-cells = <2>; 29 power-domains = <&pd IMX_SC_R_VPU_MU_1>; [all …]
|
D | imx8-ss-lsio.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2020 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 10 lsio_bus_clk: clock-lsio-bus { 11 compatible = "fixed-clock"; 12 #clock-cells = <0>; 13 clock-frequency = <100000000>; 14 clock-output-names = "lsio_bus_clk"; 18 compatible = "simple-bus"; [all …]
|
123456789