Searched full:eight (Results 1 – 25 of 325) sorted by relevance
12345678910>>...13
| /linux-6.14.4/arch/arm/include/asm/ |
| D | ucontext.h | 26 /* Last for extensibility. Eight byte aligned because some
27 coprocessors require eight byte alignment. */
36 * these should be a multiple of eight bytes and aligned to eight
|
| /linux-6.14.4/Documentation/admin-guide/media/ |
| D | cec.rst | 41 - Pulse-Eight: the pulse8-cec driver implements the following module option:
47 module option of the Pulse-Eight driver. The hardware supports it, but I
86 Note that the libcec library (https://github.com/Pulse-Eight/libcec) supports
160 utility to create the ``/dev/cecX`` devices. Support for the Pulse-Eight
172 For Pulse-Eight make /lib/systemd/system/[email protected]::
199 …ExecStart=/bin/bash -c 'for d in /dev/serial/by-id/usb-Pulse-Eight*; do /usr/bin/inputattach --dae…
247 1) Get a Pulse-Eight USB CEC dongle, connect an HDMI cable from your
248 device to the Pulse-Eight, but do not connect the Pulse-Eight to
251 Now configure the Pulse-Eight dongle::
268 The Pulse-Eight should see the <Image View On> message. If not,
[all …]
|
| /linux-6.14.4/Documentation/arch/mips/ |
| D | ingenic-tcu.rst | 8 hardware block. It features up to eight channels, that can be used as
12 have eight channels.
35 - On the oldest SoCs (up to JZ4740), all of the eight channels operate in
49 channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
|
| /linux-6.14.4/drivers/media/cec/usb/pulse8/ |
| D | Kconfig | 3 tristate "Pulse Eight HDMI CEC"
10 This is a cec driver for the Pulse Eight HDMI CEC device.
|
| /linux-6.14.4/Documentation/hwmon/ |
| D | aquacomputer_d5next.rst | 30 The Aquaero devices expose eight physical, eight virtual and four calculated
36 and current, as well as coolant temperature and eight virtual temp sensors. Also
49 as well as eight PWM controllable fans, along with their speed (in RPM), power, voltage
|
| D | emc1403.rst | 67 contain up to eight temperature sensors. EMC14x2 support two sensors
70 and EMC14x8 support eight sensors (one internal, seven external).
|
| D | max16065.rst | 57 simultaneously, and the MAX16066 manages up to eight supply voltages.
69 monitors up to eight supply voltages.
|
| /linux-6.14.4/include/linux/platform_data/ |
| D | max3421-hcd.h | 14 * MAX3421E GPIO pins. The chip has eight GP inputs and eight GP outputs.
|
| /linux-6.14.4/Documentation/ABI/stable/ |
| D | sysfs-driver-ib_srp | 10 * id_ext, a 16-digit hexadecimal number specifying the eight
14 * ioc_guid, a 16-digit hexadecimal number specifying the eight
125 Description: Eight-byte identifier extension portion of the 16-byte target
132 Description: Eight-byte I/O controller GUID portion of the 16-byte target
|
| /linux-6.14.4/Documentation/admin-guide/perf/ |
| D | mrvl-odyssey-tad-pmu.rst | 5 Each TAD provides eight 64-bit counters for monitoring
8 eight counters in every TAD to look across all TADs.
|
| D | alibaba_pmu.rst | 12 Yitian 710 employs eight DDR5/4 channels, four on each die. Each DDR5 channel
31 to count the total access number of either the eight bank groups in a
|
| /linux-6.14.4/Documentation/devicetree/bindings/interrupt-controller/ |
| D | samsung,exynos4210-combiner.yaml | 18 The interrupt combiner controller consists of multiple combiners. Up to eight
20 combined interrupt for its eight interrupt sources. The combined interrupt is
|
| D | loongson,htvec.yaml | 26 description: Eight parent interrupts that receive chained interrupts.
|
| /linux-6.14.4/arch/x86/crypto/ |
| D | Kconfig | 118 Processes eight blocks in parallel.
148 Processes eight blocks in parallel.
181 Processes eight blocks in parallel.
292 Processes eight blocks in parallel.
|
| /linux-6.14.4/Documentation/networking/ |
| D | arcnet-hardware.rst | 125 to other segments of the net. They usually have eight connectors. Active
640 The eight switches in group S2 are used to set the node ID.
649 of eight possible I/O Base addresses using the following table::
669 16K block can be located in any of eight positions.
848 The eight switches in group SW3 are used to set the node ID. Each node
934 from 0 to 15 would be possible, but only the following eight values will
1227 There is another array of eight DIP switches at the top of the
1377 The eight switches in SW2 are used to set the node ID. Each node attached
1420 of eight possible I/O Base addresses using the following table::
1440 located in any of eight positions. The address of the Boot Prom is
[all …]
|
| /linux-6.14.4/Documentation/admin-guide/ |
| D | unicode.rst | 16 both the eight-bit character sets and UTF-8 mode are changed to use
19 This changes the semantics of the eight-bit character tables subtly.
164 U+F8F8 KLINGON DIGIT EIGHT
|
| /linux-6.14.4/arch/s390/mm/ |
| D | maccess.c | 59 * Therefore we have a read-modify-write sequence: the function reads eight
60 * bytes from destination at an eight byte boundary, modifies the bytes
|
| /linux-6.14.4/drivers/rtc/ |
| D | rtc-tegra.c | 21 /* Set to 1 = busy every eight 32 kHz clocks during copy of sec+msec to AHB. */
59 * eight 32 kHz clocks (~250 us). Outside of these updates the CPU is free to
74 * AHB side) occurs every eight 32 kHz clocks (~250 us). The behavior of this
|
| /linux-6.14.4/include/crypto/ |
| D | twofish.h | 14 * S-boxes composed with the MDS matrix; w contains the eight "whitening"
|
| /linux-6.14.4/Documentation/RCU/ |
| D | torture.rst | 179 from about eight hours to about one hour (not counting the time to build
195 eight-CPU scenario::
199 Or 28 concurrent instances of each of two eight-CPU scenarios::
359 running each scenario for eight hours. At the end of the runs, the
|
| /linux-6.14.4/Documentation/devicetree/bindings/soc/fsl/cpm_qe/ |
| D | fsl,qe-si.yaml | 13 The SI manages the routing of eight TDM lines to the QE block serial drivers,
|
| /linux-6.14.4/include/linux/mfd/ |
| D | ntxec.h | 24 * big-endian, but others only have eight significant bits, which are in the
|
| /linux-6.14.4/Documentation/devicetree/bindings/watchdog/ |
| D | cnxt,cx92755-wdt.yaml | 11 "Agent Communication" block. This block includes the eight programmable system
|
| /linux-6.14.4/Documentation/w1/masters/ |
| D | ds2482.rst | 25 one (DS2482-100) or eight (DS2482-800) 1-wire busses.
|
| /linux-6.14.4/drivers/misc/sgi-xp/ |
| D | xp.h | 50 * exceeds the absolute MAXIMUM number of channels possible (eight), then one
53 * The absolute maximum number of channels possible is limited to eight for
55 * require sixteen bytes per channel, and eight allows all of this
|
12345678910>>...13