Lines Matching full:eight
41 - Pulse-Eight: the pulse8-cec driver implements the following module option:
47 module option of the Pulse-Eight driver. The hardware supports it, but I
86 Note that the libcec library (https://github.com/Pulse-Eight/libcec) supports
160 utility to create the ``/dev/cecX`` devices. Support for the Pulse-Eight
172 For Pulse-Eight make /lib/systemd/system/[email protected]::
199 …ExecStart=/bin/bash -c 'for d in /dev/serial/by-id/usb-Pulse-Eight*; do /usr/bin/inputattach --dae…
247 1) Get a Pulse-Eight USB CEC dongle, connect an HDMI cable from your
248 device to the Pulse-Eight, but do not connect the Pulse-Eight to
251 Now configure the Pulse-Eight dongle::
268 The Pulse-Eight should see the <Image View On> message. If not,
273 Pulse-Eight to a CEC-enabled display and run the same command
275 arriving at the Pulse-Eight.