Lines Matching +full:settle +full:- +full:time +full:- +full:us
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
16 chassis-type = "embedded";
28 stdout-path = "serial0:115200n8";
31 vph_pwr: regulator-vph-pwr {
32 compatible = "regulator-fixed";
33 regulator-name = "vph_pwr";
34 regulator-min-microvolt = <3700000>;
35 regulator-max-microvolt = <3700000>;
36 regulator-always-on;
40 vreg_ext_1p3: regulator-ext-1p3 {
41 compatible = "regulator-fixed";
42 regulator-name = "vph_ext_1p3";
43 regulator-min-microvolt = <1300000>;
44 regulator-max-microvolt = <1300000>;
45 regulator-always-on;
46 vin-supply = <&vph_pwr>;
50 vreg_s10a_0p89: regulator-s10a-0p89 {
51 compatible = "regulator-fixed";
52 regulator-name = "vph_s10a_0p89";
53 regulator-min-microvolt = <890000>;
54 regulator-max-microvolt = <890000>;
55 regulator-always-on;
56 vin-supply = <&vph_pwr>;
59 thermal-zones {
60 sar2130p-thermal {
61 thermal-sensors = <&pm8150_adc_tm 1>;
64 active-config0 {
72 wifi-thermal {
73 thermal-sensors = <&pm8150_adc_tm 2>;
76 active-config0 {
84 xo-thermal {
85 thermal-sensors = <&pm8150_adc_tm 0>;
88 active-config0 {
97 wcn7850-pmu {
98 compatible = "qcom,wcn7850-pmu";
100 pinctrl-0 = <&wlan_en_state>, <&bt_en_state>;
101 pinctrl-names = "default";
103 wlan-enable-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
104 bt-enable-gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
106 vdd-supply = <&vreg_s4a_0p95>;
107 vddio-supply = <&vreg_l15a_1p8>;
108 vddaon-supply = <&vreg_s4a_0p95>;
109 vdddig-supply = <&vreg_s4a_0p95>;
110 vddrfa1p2-supply = <&vreg_s4a_0p95>;
111 vddrfa1p8-supply = <&vreg_s5a_1p88>;
115 regulator-name = "vreg_pmu_rfa_cmn";
119 regulator-name = "vreg_pmu_aon_0p59";
123 regulator-name = "vreg_pmu_wlcx_0p8";
127 regulator-name = "vreg_pmu_wlmx_0p85";
131 regulator-name = "vreg_pmu_btcmx_0p85";
135 regulator-name = "vreg_pmu_rfa_0p8";
139 regulator-name = "vreg_pmu_rfa_1p2";
143 regulator-name = "vreg_pmu_rfa_1p8";
147 regulator-name = "vreg_pmu_pcie_0p9";
151 regulator-name = "vreg_pmu_pcie_1p8";
158 regulators-0 {
159 compatible = "qcom,pm8150-rpmh-regulators";
160 qcom,pmic-id = "a";
162 vdd-s1-supply = <&vph_pwr>;
163 vdd-s2-supply = <&vph_pwr>;
164 vdd-s3-supply = <&vph_pwr>;
165 vdd-s4-supply = <&vph_pwr>;
166 vdd-s5-supply = <&vph_pwr>;
167 vdd-s6-supply = <&vph_pwr>;
168 vdd-s7-supply = <&vph_pwr>;
169 vdd-s8-supply = <&vph_pwr>;
170 vdd-s9-supply = <&vph_pwr>;
171 vdd-s10-supply = <&vph_pwr>;
172 vdd-l1-l8-l11-supply = <&vreg_s4a_0p95>;
173 vdd-l3-l4-l5-l18-supply = <&vreg_ext_1p3>;
174 vdd-l6-l9-supply = <&vreg_s10a_0p89>;
175 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p88>;
178 regulator-name = "vreg_s4a_0p95";
179 regulator-min-microvolt = <950000>;
180 regulator-max-microvolt = <1170000>;
181 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
185 regulator-name = "vreg_s5a_1p88";
186 regulator-min-microvolt = <1856000>;
187 regulator-max-microvolt = <2040000>;
188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 regulator-name = "vreg_l1a_0p91";
193 regulator-min-microvolt = <912000>;
194 regulator-max-microvolt = <920000>;
195 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
199 regulator-name = "vreg_l2a_3p1";
200 regulator-min-microvolt = <3080000>;
201 regulator-max-microvolt = <3544000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
206 regulator-name = "vreg_l3a_1p2";
207 regulator-min-microvolt = <1200000>;
208 regulator-max-microvolt = <1304000>;
209 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212 /* ldo4 1.26 - system ? */
215 regulator-name = "vreg_l5a_1p13";
216 regulator-min-microvolt = <1128000>;
217 regulator-max-microvolt = <1170000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 regulator-name = "vreg_l6a_0p6";
223 regulator-min-microvolt = <600000>;
224 regulator-max-microvolt = <650000>;
225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
229 regulator-name = "vreg_l7a_1p8";
230 regulator-min-microvolt = <1800000>;
231 regulator-max-microvolt = <1950000>;
232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
236 regulator-name = "vreg_l8a_0p88";
237 regulator-min-microvolt = <880000>;
238 regulator-max-microvolt = <950000>;
239 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
242 /* ldo9 - LCX */
245 regulator-name = "vreg_l10a_2p95";
246 regulator-min-microvolt = <2952000>;
247 regulator-max-microvolt = <3544000>;
248 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251 /* ldo11 - LMX */
254 regulator-name = "vreg_l12a_1p8";
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <1880000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 regulator-name = "vreg_l14a_1p8";
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1880000>;
266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
270 regulator-name = "vreg_l15a_1p8";
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <1800000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 /* no ldo16 - system */
279 regulator-name = "vreg_l17a_3p26";
280 regulator-min-microvolt = <3200000>;
281 regulator-max-microvolt = <3544000>;
282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
286 regulator-name = "vreg_l18a_1p2";
287 regulator-min-microvolt = <1200000>;
288 regulator-max-microvolt = <1304000>;
289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 firmware-name = "qcom/sar2130p/a620_zap.mbn";
330 clock-frequency = <400000>;
336 clock-frequency = <400000>;
344 reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
346 vdd3v3-supply = <&vreg_l2a_3p1>;
347 vdd1v8-supply = <&vreg_l15a_1p8>;
349 #phy-cells = <0>;
354 clock-frequency = <400000>;
360 perst-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
361 wake-gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
363 pinctrl-0 = <&pcie0_default_state>;
364 pinctrl-names = "default";
374 vddaon-supply = <&vreg_pmu_aon_0p59>;
375 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
376 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
377 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
378 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
379 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
380 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
381 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
382 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
387 vdda-phy-supply = <&vreg_l8a_0p88>;
388 vdda-pll-supply = <&vreg_l3a_1p2>;
397 qcom,hw-settle-time = <200>;
404 qcom,hw-settle-time = <200>;
405 qcom,pre-scaling = <1 1>;
410 /* msm-5.10 uses ADC5_AMUX_THM2 / 0x0e, although there is a pullup */
412 qcom,hw-settle-time = <200>;
413 qcom,pre-scaling = <1 1>;
421 xo-therm@0 {
423 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
425 qcom,hw-settle-time-us = <200>;
428 skin-therm@1 {
430 io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
432 qcom,hw-settle-time-us = <200>;
435 wifi-therm@2 {
437 /* msm-5.10 uses ADC5_AMUX_THM2, although there is a pullup */
438 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
439 qcom,hw-settle-time-us = <200>;
444 firmware-name = "qcom/sar2130p/adsp.mbn";
450 vmmc-supply = <&vreg_l10a_2p95>;
451 vqmmc-supply = <&vreg_l7a_1p8>;
457 bt_en_state: bt-enable-state {
460 drive-strength = <16>;
461 bias-disable;
464 pcie0_default_state: pcie0-default-state {
465 perst-pins {
468 drive-strength = <2>;
469 bias-pull-down;
472 clkreq-pins {
475 drive-strength = <2>;
476 bias-pull-up;
479 wake-pins {
482 drive-strength = <2>;
483 bias-pull-up;
487 pcie1_default_state: pcie1-default-state {
488 perst-pins {
491 drive-strength = <2>;
492 bias-pull-down;
495 clkreq-pins {
498 drive-strength = <2>;
499 bias-pull-up;
502 wake-pins {
505 drive-strength = <2>;
506 bias-pull-up;
510 wlan_en_state: wlan-enable-state {
513 drive-strength = <16>;
514 bias-disable;
522 compatible = "qcom,wcn7850-bt";
524 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
525 vddaon-supply = <&vreg_pmu_aon_0p59>;
526 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
527 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
528 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
529 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
530 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
532 max-speed = <3200000>;
545 vdd-supply = <&vreg_l8a_0p88>;
546 vdda12-supply = <&vreg_l3a_1p2>;
554 vdda-phy-supply = <&vreg_l3a_1p2>;
555 vdda-pll-supply = <&vreg_l1a_0p91>;