Lines Matching +full:hw +full:- +full:settle +full:- +full:time
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/sound/qcom,q6afe.h>
11 #include <dt-bindings/sound/qcom,q6asm.h>
12 #include <dt-bindings/usb/pd.h>
20 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
21 qcom,msm-id = <455 0x20001>;
22 qcom,board-id = <11 3>;
31 stdout-path = "serial0:115200n8";
35 clk40m: can-clock {
36 compatible = "fixed-clock";
37 #clock-cells = <0>;
38 clock-frequency = <40000000>;
41 dc12v: dc12v-regulator {
42 compatible = "regulator-fixed";
43 regulator-name = "DC12V";
44 regulator-min-microvolt = <12000000>;
45 regulator-max-microvolt = <12000000>;
46 regulator-always-on;
49 hdmi-out {
50 compatible = "hdmi-connector";
55 remote-endpoint = <<9611_out>;
61 compatible = "gpio-leds";
63 led-user4 {
68 default-state = "off";
69 panic-indicator;
72 led-wlan {
77 linux,default-trigger = "phy0tx";
78 default-state = "off";
81 led-bt {
86 linux,default-trigger = "bluetooth-power";
87 default-state = "off";
91 lt9611_1v2: lt9611-vdd12-regulator {
92 compatible = "regulator-fixed";
93 regulator-name = "LT9611_1V2";
95 vin-supply = <&vdc_3v3>;
96 regulator-min-microvolt = <1200000>;
97 regulator-max-microvolt = <1200000>;
100 lt9611_3v3: lt9611-3v3 {
101 compatible = "regulator-fixed";
102 regulator-name = "LT9611_3V3";
104 vin-supply = <&vdc_3v3>;
105 regulator-min-microvolt = <3300000>;
106 regulator-max-microvolt = <3300000>;
107 regulator-boot-on;
108 regulator-always-on;
111 qca6390-pmu {
112 compatible = "qcom,qca6390-pmu";
114 pinctrl-names = "default";
115 pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
117 vddaon-supply = <&vreg_s6a_0p95>;
118 vddpmu-supply = <&vreg_s2f_0p95>;
119 vddrfa0p95-supply = <&vreg_s2f_0p95>;
120 vddrfa1p3-supply = <&vreg_s8c_1p3>;
121 vddrfa1p9-supply = <&vreg_s5a_1p9>;
122 vddpcie1p3-supply = <&vreg_s8c_1p3>;
123 vddpcie1p9-supply = <&vreg_s5a_1p9>;
124 vddio-supply = <&vreg_s4a_1p8>;
126 wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
127 bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
131 regulator-name = "vreg_pmu_rfa_cmn";
135 regulator-name = "vreg_pmu_aon_0p59";
139 regulator-name = "vreg_pmu_wlcx_0p8";
143 regulator-name = "vreg_pmu_wlmx_0p85";
147 regulator-name = "vreg_pmu_btcmx_0p85";
151 regulator-name = "vreg_pmu_rfa_0p8";
155 regulator-name = "vreg_pmu_rfa_1p2";
159 regulator-name = "vreg_pmu_rfa_1p7";
163 regulator-name = "vreg_pmu_pcie_0p9";
167 regulator-name = "vreg_pmu_pcie_1p8";
172 thermal-zones {
173 conn-thermal {
174 thermal-sensors = <&pm8150b_adc_tm 0>;
177 active-config0 {
185 pm8150l-pcb-thermal {
186 thermal-sensors = <&pm8150l_adc_tm 1>;
189 active-config0 {
197 skin-msm-thermal {
198 thermal-sensors = <&pm8150l_adc_tm 0>;
201 active-config0 {
209 wifi-thermal {
210 thermal-sensors = <&pm8150_adc_tm 1>;
213 active-config0 {
221 xo-thermal {
222 thermal-sensors = <&pm8150_adc_tm 0>;
225 active-config0 {
234 vbat: vbat-regulator {
235 compatible = "regulator-fixed";
236 regulator-name = "VBAT";
237 vin-supply = <&vreg_l11c_3p3>;
238 regulator-min-microvolt = <4200000>;
239 regulator-max-microvolt = <4200000>;
240 regulator-always-on;
243 vbat_som: vbat-som-regulator {
244 compatible = "regulator-fixed";
245 regulator-name = "VBAT_SOM";
246 vin-supply = <&dc12v>;
247 regulator-min-microvolt = <4200000>;
248 regulator-max-microvolt = <4200000>;
249 regulator-always-on;
252 vdc_3v3: vdc-3v3-regulator {
253 compatible = "regulator-fixed";
254 regulator-name = "VDC_3V3";
255 vin-supply = <&vreg_l11c_3p3>;
256 regulator-min-microvolt = <3300000>;
257 regulator-max-microvolt = <3300000>;
258 regulator-always-on;
261 vdc_5v: vdc-5v-regulator {
262 compatible = "regulator-fixed";
263 regulator-name = "VDC_5V";
265 regulator-min-microvolt = <5000000>;
266 regulator-max-microvolt = <5000000>;
267 regulator-always-on;
268 vin-supply = <&vreg_l11c_3p3>;
271 vph_pwr: vph-pwr-regulator {
272 compatible = "regulator-fixed";
273 regulator-name = "vph_pwr";
274 regulator-min-microvolt = <3700000>;
275 regulator-max-microvolt = <3700000>;
276 regulator-always-on;
279 vreg_s4a_1p8: vreg-s4a-1p8 {
280 compatible = "regulator-fixed";
281 regulator-name = "vreg_s4a_1p8";
282 regulator-min-microvolt = <1800000>;
283 regulator-max-microvolt = <1800000>;
284 regulator-always-on;
290 firmware-name = "qcom/sm8250/adsp.mbn";
294 regulators-0 {
295 compatible = "qcom,pm8009-1-rpmh-regulators";
296 qcom,pmic-id = "f";
298 vdd-s1-supply = <&vph_pwr>;
299 vdd-s2-supply = <&vph_pwr>;
300 vdd-l2-supply = <&vreg_s8c_1p3>;
301 vdd-l5-l6-supply = <&vreg_bob>;
302 vdd-l7-supply = <&vreg_s4a_1p8>;
305 regulator-name = "vreg_s2f_0p95";
306 regulator-min-microvolt = <900000>;
307 regulator-max-microvolt = <952000>;
308 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
312 regulator-name = "vreg_l1f_1p1";
313 regulator-min-microvolt = <1104000>;
314 regulator-max-microvolt = <1104000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-name = "vreg_l2f_1p2";
320 regulator-min-microvolt = <1200000>;
321 regulator-max-microvolt = <1200000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-name = "vreg_l6f_2p8";
327 regulator-min-microvolt = <2800000>;
328 regulator-max-microvolt = <2800000>;
329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 regulator-name = "vreg_l7f_1p8";
334 regulator-min-microvolt = <1800000>;
335 regulator-max-microvolt = <1800000>;
336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
340 regulators-1 {
341 compatible = "qcom,pm8150-rpmh-regulators";
342 qcom,pmic-id = "a";
344 vdd-s1-supply = <&vph_pwr>;
345 vdd-s2-supply = <&vph_pwr>;
346 vdd-s3-supply = <&vph_pwr>;
347 vdd-s4-supply = <&vph_pwr>;
348 vdd-s5-supply = <&vph_pwr>;
349 vdd-s6-supply = <&vph_pwr>;
350 vdd-s7-supply = <&vph_pwr>;
351 vdd-s8-supply = <&vph_pwr>;
352 vdd-s9-supply = <&vph_pwr>;
353 vdd-s10-supply = <&vph_pwr>;
354 vdd-l2-l10-supply = <&vreg_bob>;
355 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
356 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
357 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
358 vdd-l13-l16-l17-supply = <&vreg_bob>;
361 regulator-name = "vreg_l2a_3p1";
362 regulator-min-microvolt = <3072000>;
363 regulator-max-microvolt = <3072000>;
364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
368 regulator-name = "vreg_l3a_0p9";
369 regulator-min-microvolt = <928000>;
370 regulator-max-microvolt = <932000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375 regulator-name = "vreg_l5a_0p88";
376 regulator-min-microvolt = <880000>;
377 regulator-max-microvolt = <880000>;
378 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
382 regulator-name = "vreg_l6a_1p2";
383 regulator-min-microvolt = <1200000>;
384 regulator-max-microvolt = <1200000>;
385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
389 regulator-name = "vreg_l7a_1p7";
390 regulator-min-microvolt = <1704000>;
391 regulator-max-microvolt = <1800000>;
392 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
396 regulator-name = "vreg_l9a_1p2";
397 regulator-min-microvolt = <1200000>;
398 regulator-max-microvolt = <1200000>;
399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 regulator-name = "vreg_l10a_1p8";
404 regulator-min-microvolt = <1800000>;
405 regulator-max-microvolt = <1800000>;
406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
410 regulator-name = "vreg_l12a_1p8";
411 regulator-min-microvolt = <1800000>;
412 regulator-max-microvolt = <1800000>;
413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
417 regulator-name = "vreg_l13a_ts_3p0";
418 regulator-min-microvolt = <3008000>;
419 regulator-max-microvolt = <3008000>;
420 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
424 regulator-name = "vreg_l14a_1p8";
425 regulator-min-microvolt = <1800000>;
426 regulator-max-microvolt = <1880000>;
427 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
431 regulator-name = "vreg_l15a_1p8";
432 regulator-min-microvolt = <1800000>;
433 regulator-max-microvolt = <1800000>;
434 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
438 regulator-name = "vreg_l16a_2p7";
439 regulator-min-microvolt = <2704000>;
440 regulator-max-microvolt = <2960000>;
441 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
445 regulator-name = "vreg_l17a_3p0";
446 regulator-min-microvolt = <2856000>;
447 regulator-max-microvolt = <3008000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452 regulator-name = "vreg_l18a_0p92";
453 regulator-min-microvolt = <800000>;
454 regulator-max-microvolt = <912000>;
455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
459 regulator-name = "vreg_s5a_1p9";
460 regulator-min-microvolt = <1904000>;
461 regulator-max-microvolt = <2000000>;
462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
466 regulator-name = "vreg_s6a_0p95";
467 regulator-min-microvolt = <920000>;
468 regulator-max-microvolt = <1128000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
473 regulators-2 {
474 compatible = "qcom,pm8150l-rpmh-regulators";
475 qcom,pmic-id = "c";
477 vdd-s1-supply = <&vph_pwr>;
478 vdd-s2-supply = <&vph_pwr>;
479 vdd-s3-supply = <&vph_pwr>;
480 vdd-s4-supply = <&vph_pwr>;
481 vdd-s5-supply = <&vph_pwr>;
482 vdd-s6-supply = <&vph_pwr>;
483 vdd-s7-supply = <&vph_pwr>;
484 vdd-s8-supply = <&vph_pwr>;
485 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
486 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
487 vdd-l4-l5-l6-supply = <&vreg_bob>;
488 vdd-l7-l11-supply = <&vreg_bob>;
489 vdd-l9-l10-supply = <&vreg_bob>;
490 vdd-bob-supply = <&vph_pwr>;
493 regulator-name = "vreg_bob";
494 regulator-min-microvolt = <3008000>;
495 regulator-max-microvolt = <4000000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
500 regulator-name = "vreg_l1c_1p8";
501 regulator-min-microvolt = <1800000>;
502 regulator-max-microvolt = <1800000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
507 regulator-name = "vreg_l2c_1p2";
508 regulator-min-microvolt = <1200000>;
509 regulator-max-microvolt = <1200000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
514 regulator-name = "vreg_l3c_0p8";
515 regulator-min-microvolt = <800000>;
516 regulator-max-microvolt = <800000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
521 regulator-name = "vreg_l4c_1p7";
522 regulator-min-microvolt = <1704000>;
523 regulator-max-microvolt = <2928000>;
524 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
528 regulator-name = "vreg_l5c_1p8";
529 regulator-min-microvolt = <1800000>;
530 regulator-max-microvolt = <2928000>;
531 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
535 regulator-name = "vreg_l6c_2p96";
536 regulator-min-microvolt = <1800000>;
537 regulator-max-microvolt = <2960000>;
538 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
542 regulator-name = "vreg_l7c_cam_vcm0_2p85";
543 regulator-min-microvolt = <2856000>;
544 regulator-max-microvolt = <3104000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
549 regulator-name = "vreg_l8c_1p8";
550 regulator-min-microvolt = <1800000>;
551 regulator-max-microvolt = <1800000>;
552 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 regulator-name = "vreg_l9c_2p96";
557 regulator-min-microvolt = <2704000>;
558 regulator-max-microvolt = <2960000>;
559 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 regulator-name = "vreg_l10c_3p0";
564 regulator-min-microvolt = <3000000>;
565 regulator-max-microvolt = <3000000>;
566 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 regulator-name = "vreg_l11c_3p3";
571 regulator-min-microvolt = <3296000>;
572 regulator-max-microvolt = <3296000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
574 regulator-always-on;
578 regulator-name = "vreg_s8c_1p3";
579 regulator-min-microvolt = <1352000>;
580 regulator-max-microvolt = <1352000>;
581 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
588 firmware-name = "qcom/sm8250/cdsp.mbn";
598 zap-shader {
599 memory-region = <&gpu_mem>;
600 firmware-name = "qcom/sm8250/a650_zap.mbn";
604 /* LS-I2C0 */
611 clock-frequency = <400000>;
613 lt9611_codec: hdmi-bridge@2b {
616 #sound-dai-cells = <1>;
618 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
620 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
622 vdd-supply = <<9611_1v2>;
623 vcc-supply = <<9611_3v3>;
625 pinctrl-names = "default";
626 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
629 #address-cells = <1>;
630 #size-cells = <0>;
636 remote-endpoint = <&mdss_dsi0_out>;
645 remote-endpoint = <&mdss_dsi1_out>;
654 remote-endpoint = <&hdmi_con>;
662 /* LS-I2C1 */
666 typec-mux@1c {
670 vcc-supply = <&vreg_s4a_1p8>;
672 retimer-switch;
673 orientation-switch;
676 #address-cells = <1>;
677 #size-cells = <0>;
683 remote-endpoint = <&pm8150b_typec_mux_in>;
691 remote-endpoint = <&usb_1_qmpphy_out>;
692 data-lanes = <0 1 2 3>;
700 remote-endpoint = <&pm8150b_typec_sbu_out>;
716 data-lanes = <0 1>;
717 remote-endpoint = <&usb_1_qmpphy_dp_in>;
722 vdda-supply = <&vreg_l9a_1p2>;
725 qcom,dual-dsi-mode;
726 qcom,master-dsi;
732 remote-endpoint = <<9611_a>;
733 data-lanes = <0 1 2 3>;
741 vdds-supply = <&vreg_l5a_0p88>;
748 qcom,hw-settle-time = <200>;
755 qcom,hw-settle-time = <200>;
763 xo-therm@0 {
765 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
767 qcom,hw-settle-time-us = <200>;
770 wifi-therm@1 {
772 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
774 qcom,hw-settle-time-us = <200>;
784 vdda-phy-supply = <&vreg_l5a_0p88>;
785 vdda-pll-supply = <&vreg_l9a_1p2>;
793 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
794 vddaon-supply = <&vreg_pmu_aon_0p59>;
795 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
796 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
797 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
798 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
799 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
800 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
801 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
811 vdda-phy-supply = <&vreg_l5a_0p88>;
812 vdda-pll-supply = <&vreg_l9a_1p2>;
821 vdda-phy-supply = <&vreg_l5a_0p88>;
822 vdda-pll-supply = <&vreg_l9a_1p2>;
826 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
827 gpio-line-names =
830 "PM_GPIO-F",
844 qcom,hw-settle-time = <200>;
852 conn-therm@0 {
854 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
856 qcom,hw-settle-time-us = <200>;
861 gpio-line-names =
880 qcom,hw-settle-time = <200>;
887 qcom,hw-settle-time = <200>;
895 skin-msm-therm@0 {
897 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
899 qcom,hw-settle-time-us = <200>;
902 pm8150l-therm@1 {
904 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
906 qcom,hw-settle-time-us = <200>;
911 gpio-line-names =
917 "PM_GPIO-A", /* PWM */
921 "PM_GPIO-B",
925 lt9611_rst_pin: lt9611-rst-state {
929 output-high;
930 input-disable;
931 power-source = <0>;
938 #address-cells = <1>;
939 #size-cells = <0>;
945 function-enumerator = <3>;
947 linux,default-trigger = "heartbeat";
948 default-state = "on";
955 function-enumerator = <2>;
956 default-state = "on";
963 function-enumerator = <1>;
968 mode-bootloader = <0x2>;
969 mode-recovery = <0x1>;
997 qcom,sd-lines = <0 1 2 3>;
1005 qcom,sd-lines = <0>;
1025 pinctrl-names = "default";
1026 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
1027 vmmc-supply = <&vreg_l9c_2p96>;
1028 vqmmc-supply = <&vreg_l6c_2p96>;
1029 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
1030 bus-width = <4>;
1031 no-sdio;
1032 no-mmc;
1036 compatible = "qcom,qrb5165-rb5-sndcard";
1037 pinctrl-0 = <&tert_mi2s_active>;
1038 pinctrl-names = "default";
1039 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
1040 audio-routing =
1043 "VA DMIC0", "vdd-micb",
1044 "VA DMIC1", "vdd-micb",
1049 mm1-dai-link {
1050 link-name = "MultiMedia1";
1052 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
1056 mm2-dai-link {
1057 link-name = "MultiMedia2";
1059 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
1063 mm3-dai-link {
1064 link-name = "MultiMedia3";
1066 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
1070 hdmi-dai-link {
1071 link-name = "HDMI Playback";
1073 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
1077 sound-dai = <&q6routing>;
1081 sound-dai = <<9611_codec 0>;
1085 dma-dai-link {
1086 link-name = "WSA Playback";
1088 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
1092 sound-dai = <&q6routing>;
1096 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
1100 va-dai-link {
1101 link-name = "VA Capture";
1103 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
1107 sound-dai = <&q6routing>;
1111 sound-dai = <&vamacro 0>;
1119 pinctrl-names = "default";
1120 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
1121 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
1127 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1128 spi-max-frequency = <10000000>;
1129 vdd-supply = <&vdc_5v>;
1130 xceiver-supply = <&vdc_5v>;
1140 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1141 #thermal-sensor-cells = <0>;
1142 sound-name-prefix = "SpkrLeft";
1143 #sound-dai-cells = <0>;
1149 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1150 #thermal-sensor-cells = <0>;
1151 sound-name-prefix = "SpkrRight";
1152 #sound-dai-cells = <0>;
1157 gpio-reserved-ranges = <40 4>;
1158 gpio-line-names =
1159 "GPIO-MM",
1160 "GPIO-NN",
1161 "GPIO-OO",
1162 "GPIO-PP",
1163 "GPIO-A",
1164 "GPIO-C",
1165 "GPIO-E",
1166 "GPIO-D",
1167 "I2C0-SDA",
1168 "I2C0-SCL",
1169 "GPIO-TT", /* GPIO_10 */
1173 "GPIO-X",
1181 "GPIO-AAA",
1182 "GPIO-BBB",
1183 "GPIO-CCC",
1184 "GPIO-Z",
1185 "GPIO-DDD",
1186 "GPIO-BB",
1191 "GPIO-UU",
1205 "GPIO-F",
1206 "GPIO-JJ",
1215 "GPIO-QQ",
1216 "GPIO-RR",
1223 "GPIO-AA",
1225 "GPIO-G",
1226 "GPIO-LL",
1237 "GPIO-II",
1241 "GPIO-CC",
1242 "GPIO-DD",
1243 "GPIO-EE",
1244 "GPIO-FF",
1245 "GPIO-GG",
1246 "GPIO-HH",
1247 "GPIO-VV",
1248 "GPIO-WW",
1251 "GPIO-K",
1252 "GPIO-I",
1257 "GPIO-AA", /* CSI4_MCLK */
1258 "GPIO-BB", /* CSI5_MCLK */
1259 "GPIO-KK", /* GPIO_100 */
1268 "GPIO-L",
1273 "GPIO-J",
1274 "GPIO-YY",
1275 "GPIO-H",
1276 "GPIO-ZZ",
1284 "GPIO-M",
1285 "GPIO-N",
1286 "GPIO-O",
1287 "GPIO-P",
1295 "GPIO-B",
1303 "GPIO-U",
1304 "GPIO-Y",
1305 "GPIO-R",
1306 "GPIO-Q",
1307 "GPIO-S",
1308 "GPIO-T",
1309 "GPIO-V", /* GPIO_150 */
1310 "GPIO-W",
1329 "GPIO-SS", /* GPIO_170 */
1330 "GPIO-XX",
1340 bt_en_state: bt-default-state {
1343 drive-strength = <16>;
1344 output-low;
1345 bias-pull-up;
1348 lt9611_irq_pin: lt9611-irq-state {
1351 bias-disable;
1354 sdc2_default_state: sdc2-default-state {
1355 clk-pins {
1357 bias-disable;
1358 drive-strength = <16>;
1361 cmd-pins {
1363 bias-pull-up;
1364 drive-strength = <10>;
1367 data-pins {
1369 bias-pull-up;
1370 drive-strength = <10>;
1374 sdc2_card_det_n: sd-card-det-n-state {
1377 bias-pull-up;
1380 wlan_en_state: wlan-default-state {
1383 drive-strength = <16>;
1384 output-low;
1385 bias-pull-up;
1393 compatible = "qcom,qca6390-bt";
1395 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
1396 vddaon-supply = <&vreg_pmu_aon_0p59>;
1397 vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
1398 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
1399 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
1400 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
1411 vcc-supply = <&vreg_l17a_3p0>;
1412 vcc-max-microamp = <800000>;
1413 vccq-supply = <&vreg_l6a_1p2>;
1414 vccq-max-microamp = <800000>;
1415 vccq2-supply = <&vreg_s4a_1p8>;
1416 vccq2-max-microamp = <800000>;
1422 vdda-phy-supply = <&vreg_l5a_0p88>;
1423 vdda-pll-supply = <&vreg_l9a_1p2>;
1432 usb-role-switch;
1436 remote-endpoint = <&pm8150b_hs_in>;
1442 vdda-pll-supply = <&vreg_l5a_0p88>;
1443 vdda33-supply = <&vreg_l2a_3p1>;
1444 vdda18-supply = <&vreg_l12a_1p8>;
1450 vdda-phy-supply = <&vreg_l9a_1p2>;
1451 vdda-pll-supply = <&vreg_l18a_0p92>;
1455 remote-endpoint = <&redriver_phy_con_ss>;
1469 vdda-pll-supply = <&vreg_l5a_0p88>;
1470 vdda33-supply = <&vreg_l2a_3p1>;
1471 vdda18-supply = <&vreg_l12a_1p8>;
1477 vdda-phy-supply = <&vreg_l9a_1p2>;
1478 vdda-pll-supply = <&vreg_l18a_0p92>;
1482 pinctrl-0 = <&dmic01_active>;
1483 pinctrl-names = "default";
1484 vdd-micb-supply = <&vreg_s4a_1p8>;
1485 qcom,dmic-sample-rate = <600000>;
1496 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1498 drive-strength = <6>;
1499 bias-disable;
1503 drive-strength = <6>;
1504 bias-disable;
1508 regulator-min-microamp = <500000>;
1509 regulator-max-microamp = <3000000>;
1516 vdd-pdphy-supply = <&vreg_l2a_3p1>;
1519 compatible = "usb-c-connector";
1521 power-role = "source";
1522 data-role = "dual";
1523 self-powered;
1525 source-pdos = <PDO_FIXED(5000, 3000,
1538 #address-cells = <1>;
1539 #size-cells = <0>;
1544 remote-endpoint = <&usb_1_dwc3_hs_out>;
1551 remote-endpoint = <&redriver_usb_con_ss>;
1559 remote-endpoint = <&redriver_usb_con_sbu>;
1567 remote-endpoint = <&mdss_dp_out>;