Lines Matching full:burst

260       start the corresponding USB RX transaction (burst).
270   snps,rx-max-burst:
272       Max USB RX burst size. In host mode, this field specifies the
273       Maximum Bulk IN burst the DWC_usb3 core can perform. When the system
274       bus is slower than the USB, RX FIFO can overrun during a long burst.
275       You can program a smaller value to this field to limit the RX burst
290       transmission for the corresponding USB transaction (burst).
299   snps,tx-max-burst:
301       Max USB TX burst size. When the system bus is slower than the USB,
302       TX FIFO can underrun during a long burst. Program a smaller value
303       to this field to limit the TX burst size that the core can execute.
315       snps,rx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
321   snps,rx-max-burst-prd:
323       Max periodic ESS RX burst size (host mode only). Set this and
333       snps,tx-max-burst-prd to a valid, non-zero value 1-16 (DWC_usb31
339   snps,tx-max-burst-prd:
341       Max periodic ESS TX burst size (host mode only). Set this and
364   snps,incr-burst-type-adjustment:
366       Value for INCR burst type of GSBUSCFG0 register, undefined length INCR
367       burst type enable and INCRx type. A single value means INCRX burst mode
368       enabled. If more than one value specified, undefined length INCR burst
369       type will be enabled with burst lengths utilized up to the maximum