xref: /btstack/src/l2cap.h (revision 98f1394d9d4c33f501ec5dcff54d145a92013c5e)
1 /*
2  * Copyright (C) 2014 BlueKitchen GmbH
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holders nor the names of
14  *    contributors may be used to endorse or promote products derived
15  *    from this software without specific prior written permission.
16  * 4. Any redistribution, use, or modification is done solely for
17  *    personal benefit and not for any commercial purpose or for
18  *    monetary gain.
19  *
20  * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
23  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN
24  * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
26  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
27  * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
28  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
30  * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  * Please inquire about commercial licensing options at
34  * [email protected]
35  *
36  */
37 
38 /**
39  * @title L2CAP
40  *
41  * Logical Link Control and Adaption Protocol
42  *
43  */
44 
45 #ifndef L2CAP_H
46 #define L2CAP_H
47 
48 #include "hci.h"
49 #include "l2cap_signaling.h"
50 #include "btstack_util.h"
51 #include "bluetooth.h"
52 
53 #if defined __cplusplus
54 extern "C" {
55 #endif
56 
57 // check L2CAP MTU
58 #ifdef ENABLE_CLASSIC
59 #if (L2CAP_HEADER_SIZE + L2CAP_MINIMAL_MTU) > HCI_ACL_PAYLOAD_SIZE
60 #error "HCI_ACL_PAYLOAD_SIZE too small for minimal L2CAP MTU of 48 bytes"
61 #endif
62 #endif
63 #ifdef ENABLE_BLE
64 #if (L2CAP_HEADER_SIZE + L2CAP_LE_DEFAULT_MTU) > HCI_ACL_PAYLOAD_SIZE
65 #error "HCI_ACL_PAYLOAD_SIZE too small for minimal L2CAP LE MTU of 23 bytes"
66 #endif
67 #endif
68 
69 #define L2CAP_LE_AUTOMATIC_CREDITS 0xffff
70 
71 // private structs
72 typedef enum {
73     L2CAP_STATE_CLOSED = 1,           // no baseband
74     L2CAP_STATE_WILL_SEND_CREATE_CONNECTION,
75     L2CAP_STATE_WAIT_CONNECTION_COMPLETE,
76     L2CAP_STATE_WAIT_REMOTE_SUPPORTED_FEATURES,
77     L2CAP_STATE_WAIT_INCOMING_SECURITY_LEVEL_UPDATE,
78     L2CAP_STATE_WAIT_OUTGOING_SECURITY_LEVEL_UPDATE,
79     L2CAP_STATE_WAIT_INCOMING_EXTENDED_FEATURES,    // only for Enhanced Retransmission Mode
80     L2CAP_STATE_WAIT_OUTGOING_EXTENDED_FEATURES,    // only for Enhanced Retransmission Mode
81     L2CAP_STATE_WAIT_CLIENT_ACCEPT_OR_REJECT,
82     L2CAP_STATE_WAIT_CONNECT_RSP, // from peer
83     L2CAP_STATE_CONFIG,
84     L2CAP_STATE_OPEN,
85     L2CAP_STATE_WAIT_DISCONNECT,  // from application
86     L2CAP_STATE_WILL_SEND_CONNECTION_REQUEST,
87     L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_INSUFFICIENT_SECURITY,
88     L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_DECLINE,
89     L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_ACCEPT,
90     L2CAP_STATE_WILL_SEND_DISCONNECT_REQUEST,
91     L2CAP_STATE_WILL_SEND_DISCONNECT_RESPONSE,
92     L2CAP_STATE_WILL_SEND_LE_CONNECTION_REQUEST,
93     L2CAP_STATE_WILL_SEND_LE_CONNECTION_RESPONSE_DECLINE,
94     L2CAP_STATE_WILL_SEND_LE_CONNECTION_RESPONSE_ACCEPT,
95     L2CAP_STATE_WAIT_LE_CONNECTION_RESPONSE,
96     L2CAP_STATE_EMIT_OPEN_FAILED_AND_DISCARD,
97     L2CAP_STATE_WILL_SEND_ENHANCED_CONNECTION_REQUEST,
98     L2CAP_STATE_WAIT_ENHANCED_CONNECTION_RESPONSE,
99     L2CAP_STATE_WILL_SEND_ENHANCED_CONNECTION_RESPONSE,
100     L2CAP_STATE_WILL_SEND_EHNANCED_RENEGOTIATION_REQUEST,
101     L2CAP_STATE_WAIT_ENHANCED_RENEGOTIATION_RESPONSE,
102     L2CAP_STATE_INVALID,
103 } L2CAP_STATE;
104 
105 #define L2CAP_CHANNEL_STATE_VAR_NONE                   0
106 #define L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_REQ          1 << 0
107 #define L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_RSP          1 << 1
108 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_REQ          1 << 2
109 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP          1 << 3
110 #define L2CAP_CHANNEL_STATE_VAR_SENT_CONF_REQ          1 << 4
111 #define L2CAP_CHANNEL_STATE_VAR_SENT_CONF_RSP          1 << 5
112 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_MTU      1 << 6   // in CONF RSP, add MTU option
113 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_ERTM     1 << 7   // in CONF RSP, add Retransmission and Flowcontrol option
114 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_CONT     1 << 8   // in CONF RSP, set CONTINUE flag
115 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_INVALID  1 << 9   // in CONF RSP, send UNKNOWN OPTIONS
116 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_REJECTED 1 << 10  // in CONF RSP, send Unacceptable Parameters (ERTM)
117 #define L2CAP_CHANNEL_STATE_VAR_BASIC_FALLBACK_TRIED   1 << 11  // set when ERTM was requested but we want only Basic mode (ERM)
118 #define L2CAP_CHANNEL_STATE_VAR_SEND_CONN_RESP_PEND    1 << 12  // send Connection Respond with pending
119 #define L2CAP_CHANNEL_STATE_VAR_SENT_CONN_RESP_PEND    1 << 13  // send CMD_REJ with reason unknown
120 #define L2CAP_CHANNEL_STATE_VAR_INCOMING               1 << 15  // channel is incoming
121 
122 
123 typedef enum {
124     L2CAP_CHANNEL_TYPE_CLASSIC,         // Classic Basic or ERTM
125     L2CAP_CHANNEL_TYPE_CONNECTIONLESS,  // Classic Connectionless
126     L2CAP_CHANNEL_TYPE_CHANNEL_CBM,     // LE
127     L2CAP_CHANNEL_TYPE_FIXED,           // LE ATT + SM, Classic SM
128     L2CAP_CHANNEL_TYPE_CHANNEL_ECBM     // Classic + LE
129 } l2cap_channel_type_t;
130 
131 
132 /*
133  * @brief L2CAP Segmentation And Reassembly packet type in I-Frames
134  */
135 typedef enum {
136     L2CAP_SEGMENTATION_AND_REASSEMBLY_UNSEGMENTED_L2CAP_SDU = 0,
137     L2CAP_SEGMENTATION_AND_REASSEMBLY_START_OF_L2CAP_SDU,
138     L2CAP_SEGMENTATION_AND_REASSEMBLY_END_OF_L2CAP_SDU,
139     L2CAP_SEGMENTATION_AND_REASSEMBLY_CONTINUATION_OF_L2CAP_SDU
140 } l2cap_segmentation_and_reassembly_t;
141 
142 typedef struct {
143     l2cap_segmentation_and_reassembly_t sar;
144     uint16_t len;
145     uint8_t  valid;
146 } l2cap_ertm_rx_packet_state_t;
147 
148 typedef struct {
149     l2cap_segmentation_and_reassembly_t sar;
150     uint16_t len;
151     uint8_t tx_seq;
152     uint8_t retry_count;
153     uint8_t retransmission_requested;
154 } l2cap_ertm_tx_packet_state_t;
155 
156 typedef struct {
157     // If not mandatory, the use of ERTM can be decided by the remote
158     uint8_t  ertm_mandatory;
159 
160     // Number of retransmissions that L2CAP is allowed to try before accepting that a packet and the channel is lost.
161     uint8_t  max_transmit;
162 
163     // time before retransmission of i-frame / Recommended : 2000 ms (ACL Flush timeout not used)
164     uint16_t retransmission_timeout_ms;
165 
166     // time after withc s-frames are sent / Recommended: 12000 ms (ACL Flush timeout not used)
167     uint16_t monitor_timeout_ms;
168 
169     // MTU for incoming SDUs
170     uint16_t local_mtu;
171 
172     // Number of buffers for outgoing data
173     uint8_t num_tx_buffers;
174 
175     // Number of packets that can be received out of order (-> our tx_window size)
176     uint8_t num_rx_buffers;
177 
178     // Frame Check Sequence (FCS) Option
179     uint8_t fcs_option;
180 
181 } l2cap_ertm_config_t;
182 
183 // info regarding an actual channel
184 // note: l2cap_fixed_channel and l2cap_channel_t share commmon fields
185 
186 typedef struct l2cap_fixed_channel {
187     // linked list - assert: first field
188     btstack_linked_item_t    item;
189 
190     // channel type
191     l2cap_channel_type_t channel_type;
192 
193     // local cid, primary key for channel lookup
194     uint16_t  local_cid;
195 
196     // packet handler
197     btstack_packet_handler_t packet_handler;
198 
199     // send request
200     uint8_t waiting_for_can_send_now;
201 
202     // -- end of shared prefix
203 
204 } l2cap_fixed_channel_t;
205 
206 typedef struct {
207     // linked list - assert: first field
208     btstack_linked_item_t    item;
209 
210     // channel type
211     l2cap_channel_type_t channel_type;
212 
213     // local cid, primary key for channel lookup
214     uint16_t  local_cid;
215 
216     // packet handler
217     btstack_packet_handler_t packet_handler;
218 
219     // send request
220     uint8_t   waiting_for_can_send_now;
221 
222     // -- end of shared prefix
223 
224     // timer
225     btstack_timer_source_t rtx; // also used for ertx
226 
227     L2CAP_STATE state;
228     uint16_t    state_var;
229 
230     // info
231     hci_con_handle_t con_handle;
232 
233     bd_addr_t address;
234     bd_addr_type_t address_type;
235 
236     uint8_t   remote_sig_id;    // used by other side, needed for delayed response
237     uint8_t   local_sig_id;     // own signaling identifier
238 
239     uint16_t  remote_cid;
240 
241     uint16_t  local_mtu;
242     uint16_t  remote_mtu;
243 
244     uint16_t  flush_timeout;    // default 0xffff
245 
246     uint16_t  psm;
247 
248     gap_security_level_t required_security_level;
249 
250     uint16_t   reason; // used in decline internal
251 
252     uint8_t   unknown_option; // used for ConfigResponse
253 
254     // Credit-Based Flow-Control mode
255 
256     // incoming SDU
257     uint8_t * receive_sdu_buffer;
258     uint16_t  receive_sdu_len;
259     uint16_t  receive_sdu_pos;
260 
261 #ifdef ENABLE_L2CAP_ENHANCED_CREDIT_BASED_FLOW_CONTROL_MODE
262     uint8_t * renegotiate_sdu_buffer;
263     uint16_t  renegotiate_mtu;
264 #endif
265 
266     // outgoing SDU
267     const uint8_t * send_sdu_buffer;
268     uint16_t   send_sdu_len;
269     uint16_t   send_sdu_pos;
270 
271     // max PDU size
272     uint16_t  remote_mps;
273 
274     // credits for outgoing traffic
275     uint16_t credits_outgoing;
276 
277     // number of packets remote will be granted
278     uint16_t new_credits_incoming;
279 
280     // credits for incoming traffic
281     uint16_t credits_incoming;
282 
283     // automatic credits incoming
284     bool automatic_credits;
285 
286 #ifdef ENABLE_L2CAP_ENHANCED_CREDIT_BASED_FLOW_CONTROL_MODE
287     uint8_t cid_index;
288     uint8_t num_cids;
289 #endif
290 
291 #ifdef ENABLE_L2CAP_ENHANCED_RETRANSMISSION_MODE
292 
293     // l2cap channel mode: basic or enhanced retransmission mode
294     l2cap_channel_mode_t mode;
295 
296     // local mps = size of rx/tx buffers
297     uint16_t local_mps;
298 
299     // retransmission timer
300     btstack_timer_source_t retransmission_timer;
301 
302     // monitor timer
303     btstack_timer_source_t monitor_timer;
304 
305     // local/remote config options
306     uint16_t local_retransmission_timeout_ms;
307     uint16_t local_monitor_timeout_ms;
308 
309     uint16_t remote_retransmission_timeout_ms;
310     uint16_t remote_monitor_timeout_ms;
311 
312     uint8_t remote_tx_window_size;
313 
314     uint8_t local_max_transmit;
315     uint8_t remote_max_transmit;
316 
317     // if ertm is not mandatory, allow fallback to L2CAP Basic Mode - flag
318     uint8_t ertm_mandatory;
319 
320     // Frame Chech Sequence (crc16) is present in both directions
321     uint8_t fcs_option;
322 
323     // sender: max num of stored outgoing frames
324     uint8_t num_tx_buffers;
325 
326     // sender: num stored outgoing frames
327     uint8_t num_stored_tx_frames;
328 
329     // sender: number of unacknowledeged I-Frames - frames have been sent, but not acknowledged yet
330     uint8_t unacked_frames;
331 
332     // sender: buffer index of oldest packet
333     uint8_t tx_read_index;
334 
335     // sender: buffer index to store next tx packet
336     uint8_t tx_write_index;
337 
338     // sender: buffer index of packet to send next
339     uint8_t tx_send_index;
340 
341     // sender: next seq nr used for sending
342     uint8_t next_tx_seq;
343 
344     // sender: selective retransmission requested
345     uint8_t srej_active;
346 
347 
348     // receiver: max num out-of-order packets // tx_window
349     uint8_t num_rx_buffers;
350 
351     // receiver: buffer index of to store packet with delta = 1
352     uint8_t rx_store_index;
353 
354     // receiver: value of tx_seq in next expected i-frame
355     uint8_t expected_tx_seq;
356 
357     // receiver: request transmission with tx_seq = req_seq and ack up to and including req_seq
358     uint8_t req_seq;
359 
360     // receiver: local busy condition
361     uint8_t local_busy;
362 
363     // receiver: send RR frame with optional final flag set - flag
364     uint8_t send_supervisor_frame_receiver_ready;
365 
366     // receiver: send RR frame with poll bit set
367     uint8_t send_supervisor_frame_receiver_ready_poll;
368 
369     // receiver: send RNR frame - flag
370     uint8_t send_supervisor_frame_receiver_not_ready;
371 
372     // receiver: send REJ frame - flag
373     uint8_t send_supervisor_frame_reject;
374 
375     // receiver: send SREJ frame - flag
376     uint8_t send_supervisor_frame_selective_reject;
377 
378     // set final bit after poll packet with poll bit was received
379     uint8_t set_final_bit_after_packet_with_poll_bit_set;
380 
381     // receiver: meta data for out-of-order frames
382     l2cap_ertm_rx_packet_state_t * rx_packets_state;
383 
384     // sender: retransmission state
385     l2cap_ertm_tx_packet_state_t * tx_packets_state;
386 
387     // receiver: reassemly pos
388     uint16_t reassembly_pos;
389 
390     // receiver: reassemly sdu length
391     uint16_t reassembly_sdu_length;
392 
393     // receiver: eassembly buffer
394     uint8_t * reassembly_buffer;
395 
396     // receiver: num_rx_buffers of size local_mps
397     uint8_t * rx_packets_data;
398 
399     // sender: num_tx_buffers of size local_mps
400     uint8_t * tx_packets_data;
401 
402 #endif
403 } l2cap_channel_t;
404 
405 // info regarding potential connections
406 typedef struct {
407     // linked list - assert: first field
408     btstack_linked_item_t    item;
409 
410     // service id
411     uint16_t  psm;
412 
413     // max local mtu for basic mode, min remote mtu for enhanced credit-based flow-control mode
414     uint16_t mtu;
415 
416     // internal connection
417     btstack_packet_handler_t packet_handler;
418 
419     // required security level
420     gap_security_level_t required_security_level;
421 
422 } l2cap_service_t;
423 
424 
425 typedef struct l2cap_signaling_response {
426     hci_con_handle_t handle;
427     uint8_t  sig_id;
428     uint8_t  code;
429     uint16_t cid;  // source cid for CONNECTION REQUEST
430     uint16_t data; // infoType for INFORMATION REQUEST, result for CONNECTION REQUEST and COMMAND UNKNOWN
431 } l2cap_signaling_response_t;
432 
433 
434 void l2cap_register_fixed_channel(btstack_packet_handler_t packet_handler, uint16_t channel_id);
435 bool l2cap_can_send_fixed_channel_packet_now(hci_con_handle_t con_handle, uint16_t channel_id);
436 void l2cap_request_can_send_fix_channel_now_event(hci_con_handle_t con_handle, uint16_t channel_id);
437 uint8_t l2cap_send_connectionless(hci_con_handle_t con_handle, uint16_t cid, uint8_t *data, uint16_t len);
438 uint8_t l2cap_send_prepared_connectionless(hci_con_handle_t con_handle, uint16_t cid, uint16_t len);
439 
440 // PTS Testing
441 int l2cap_send_echo_request(hci_con_handle_t con_handle, uint8_t *data, uint16_t len);
442 void l2cap_require_security_level_2_for_outgoing_sdp(void);
443 
444 // Used by RFCOMM - similar to l2cap_can-send_packet_now but does not check if outgoing buffer is reserved
445 bool l2cap_can_send_prepared_packet_now(uint16_t local_cid);
446 
447 /* API_START */
448 
449 //
450 // PSM numbers from https://www.bluetooth.com/specifications/assigned-numbers/logical-link-control
451 //
452 #define PSM_SDP           BLUETOOTH_PROTOCOL_SDP
453 #define PSM_RFCOMM        BLUETOOTH_PROTOCOL_RFCOMM
454 #define PSM_BNEP          BLUETOOTH_PROTOCOL_BNEP
455 // @TODO: scrape PSMs Bluetooth SIG site and put in bluetooth_psm.h or bluetooth_l2cap.h
456 #define PSM_HID_CONTROL   0x11
457 #define PSM_HID_INTERRUPT 0x13
458 #define PSM_ATT           0x1f
459 #define PSM_IPSP          0x23
460 
461 /**
462  * @brief Set up L2CAP and register L2CAP with HCI layer.
463  */
464 void l2cap_init(void);
465 
466 /**
467  * @brief Add event packet handler for LE Connection Parameter Update events
468  */
469 void l2cap_add_event_handler(btstack_packet_callback_registration_t * callback_handler);
470 
471 /**
472  * @brief Remove event packet handler.
473  */
474 void l2cap_remove_event_handler(btstack_packet_callback_registration_t * callback_handler);
475 
476 /**
477  * @brief Get max MTU for Classic connections based on btstack configuration
478  */
479 uint16_t l2cap_max_mtu(void);
480 
481 /**
482  * @brief Get max MTU for LE connections based on btstack configuration
483  */
484 uint16_t l2cap_max_le_mtu(void);
485 
486 /**
487 * @brief Set the max MTU for LE connections, if not set l2cap_max_mtu() will be used.
488 */
489 void l2cap_set_max_le_mtu(uint16_t max_mtu);
490 
491 /**
492  * @brief Creates L2CAP channel to the PSM of a remote device with baseband address. A new baseband connection will be initiated if necessary.
493  * @param packet_handler
494  * @param address
495  * @param psm
496  * @param mtu
497  * @param local_cid
498  * @return status
499  */
500 uint8_t l2cap_create_channel(btstack_packet_handler_t packet_handler, bd_addr_t address, uint16_t psm, uint16_t mtu, uint16_t * out_local_cid);
501 
502 /**
503  * @brief Disconnects L2CAP channel with given identifier.
504  * @param local_cid
505  * @return status ERROR_CODE_SUCCESS if successful or L2CAP_LOCAL_CID_DOES_NOT_EXIST
506  */
507 uint8_t l2cap_disconnect(uint16_t local_cid);
508 
509 /**
510  * @brief Queries the maximal transfer unit (MTU) for L2CAP channel with given identifier.
511  */
512 uint16_t l2cap_get_remote_mtu_for_local_cid(uint16_t local_cid);
513 
514 /**
515  * @brief Sends L2CAP data packet to the channel with given identifier.
516  * @note For channel in credit-based flow control mode, data needs to stay valid until .. event
517  * @param local_cid
518  * @param data to send
519  * @param len of data
520  * @return status
521  */
522 uint8_t l2cap_send(uint16_t local_cid, const uint8_t *data, uint16_t len);
523 
524 /**
525  * @brief Registers L2CAP service with given PSM and MTU, and assigns a packet handler.
526  * @param packet_handler
527  * @param psm
528  * @param mtu
529  * @param security_level
530  * @return status ERROR_CODE_SUCCESS if successful, otherwise L2CAP_SERVICE_ALREADY_REGISTERED or BTSTACK_MEMORY_ALLOC_FAILED
531  */
532 uint8_t l2cap_register_service(btstack_packet_handler_t packet_handler, uint16_t psm, uint16_t mtu, gap_security_level_t security_level);
533 
534 /**
535  * @brief Unregisters L2CAP service with given PSM.
536  */
537 uint8_t l2cap_unregister_service(uint16_t psm);
538 
539 /**
540  * @brief Accepts incoming L2CAP connection.
541  */
542 void l2cap_accept_connection(uint16_t local_cid);
543 
544 /**
545  * @brief Deny incoming L2CAP connection.
546  */
547 void l2cap_decline_connection(uint16_t local_cid);
548 
549 /**
550  * @brief Check if outgoing buffer is available and that there's space on the Bluetooth module
551  * @return true if packet can be sent
552  */
553 bool l2cap_can_send_packet_now(uint16_t local_cid);
554 
555 /**
556  * @brief Request emission of L2CAP_EVENT_CAN_SEND_NOW as soon as possible
557  * @note L2CAP_EVENT_CAN_SEND_NOW might be emitted during call to this function
558  *       so packet handler should be ready to handle it
559  * @param local_cid
560  * @return status
561  */
562 uint8_t l2cap_request_can_send_now_event(uint16_t local_cid);
563 
564 /**
565  * @brief Reserve outgoing buffer
566  * @note Only for L2CAP Basic Mode Channels
567  * @return true on success
568  */
569 bool l2cap_reserve_packet_buffer(void);
570 
571 /**
572  * @brief Get outgoing buffer and prepare data.
573  * @note Only for L2CAP Basic Mode Channels
574  */
575 uint8_t *l2cap_get_outgoing_buffer(void);
576 
577 /**
578  * @brief Send L2CAP packet prepared in outgoing buffer to channel
579  * @note Only for L2CAP Basic Mode Channels
580  */
581 uint8_t l2cap_send_prepared(uint16_t local_cid, uint16_t len);
582 
583 /**
584  * @brief Release outgoing buffer (only needed if l2cap_send_prepared is not called)
585  * @note Only for L2CAP Basic Mode Channels
586  */
587 void l2cap_release_packet_buffer(void);
588 
589 //
590 // Connection-Oriented Channels in Enhanced Retransmission Mode - ERTM
591 //
592 
593 /**
594  * @brief Creates L2CAP channel to the PSM of a remote device with baseband address using Enhanced Retransmission Mode.
595  *        A new baseband connection will be initiated if necessary.
596  * @param packet_handler
597  * @param address
598  * @param psm
599  * @param ertm_config
600  * @param buffer to store reassembled rx packet, out-of-order packets and unacknowledged outgoing packets with their tretransmission timers
601  * @param size of buffer
602  * @param local_cid
603  * @return status
604  */
605 uint8_t l2cap_ertm_create_channel(btstack_packet_handler_t packet_handler, bd_addr_t address, uint16_t psm,
606                                   l2cap_ertm_config_t * ertm_contig, uint8_t * buffer, uint32_t size, uint16_t * out_local_cid);
607 
608 /**
609  * @brief Accepts incoming L2CAP connection for Enhanced Retransmission Mode
610  * @param local_cid
611  * @param ertm_config
612  * @param buffer to store reassembled rx packet, out-of-order packets and unacknowledged outgoing packets with their tretransmission timers
613  * @param size of buffer
614  * @return status
615  */
616 uint8_t l2cap_ertm_accept_connection(uint16_t local_cid, l2cap_ertm_config_t * ertm_contig, uint8_t * buffer, uint32_t size);
617 
618 /**
619  * @brief Deny incoming incoming L2CAP connection for Enhanced Retransmission Mode
620  * @param local_cid
621  * @return status
622  */
623 uint8_t l2cap_ertm_decline_connection(uint16_t local_cid);
624 
625 /**
626  * @brief ERTM Set channel as busy.
627  * @note Can be cleared by l2cap_ertm_set_ready
628  * @param local_cid
629  * @return status
630  */
631 uint8_t l2cap_ertm_set_busy(uint16_t local_cid);
632 
633 /**
634  * @brief ERTM Set channel as ready
635  * @note Used after l2cap_ertm_set_busy
636  * @param local_cid
637  * @return status
638  */
639 uint8_t l2cap_ertm_set_ready(uint16_t local_cid);
640 
641 
642 //
643 // L2CAP Connection-Oriented Channels in LE Credit-Based Flow-Control Mode - CBM
644 //
645 
646 /**
647  * @brief Register L2CAP service in LE Credit-Based Flow-Control Mode
648  * @note MTU and initial credits are specified in l2cap_cbm_accept_connection(..) call
649  * @param packet_handler
650  * @param psm
651  * @param security_level
652  */
653 uint8_t l2cap_cbm_register_service(btstack_packet_handler_t packet_handler, uint16_t psm, gap_security_level_t security_level);
654 
655 /**
656  * @brief Unregister L2CAP service in LE Credit-Based Flow-Control Mode
657  * @param psm
658  */
659 
660 uint8_t l2cap_cbm_unregister_service(uint16_t psm);
661 
662 /*
663  * @brief Accept incoming connection LE Credit-Based Flow-Control Mode
664  * @param local_cid             L2CAP Channel Identifier
665  * @param receive_buffer        buffer used for reassembly of L2CAP LE Information Frames into service data unit (SDU) with given MTU
666  * @param receive_buffer_size   buffer size equals MTU
667  * @param initial_credits       Number of initial credits provided to peer or L2CAP_LE_AUTOMATIC_CREDITS to enable automatic credits
668  */
669 
670 uint8_t l2cap_cbm_accept_connection(uint16_t local_cid, uint8_t * receive_sdu_buffer, uint16_t mtu, uint16_t initial_credits);
671 
672 /**
673  * @brief Deecline connection in LE Credit-Based Flow-Control Mode
674  * @param local_cid             L2CAP Channel Identifier
675  * @param result                result, see L2CAP_CBM_CONNECTION_RESULT_SUCCESS in bluetooth.h
676  */
677 
678 uint8_t l2cap_cbm_decline_connection(uint16_t local_cid, uint16_t result);
679 
680 /**
681  * @brief Create outgoing channel in LE Credit-Based Flow-Control Mode
682  * @param packet_handler        Packet handler for this connection
683  * @param con_handle            HCI Connection Handle, LE transport
684  * @param psm                   Service PSM to connect to
685  * @param receive_buffer        buffer used for reassembly of L2CAP LE Information Frames into service data unit (SDU) with given MTU
686  * @param receive_buffer_size   buffer size equals MTU
687  * @param initial_credits       Number of initial credits provided to peer or L2CAP_LE_AUTOMATIC_CREDITS to enable automatic credits
688  * @param security_level        Minimum required security level
689  * @param out_local_cid         L2CAP LE Channel Identifier is stored here
690  */
691 uint8_t l2cap_cbm_create_channel(btstack_packet_handler_t packet_handler, hci_con_handle_t con_handle,
692     uint16_t psm, uint8_t * receive_sdu_buffer, uint16_t mtu, uint16_t initial_credits, gap_security_level_t security_level,
693     uint16_t * out_local_cid);
694 
695 /**
696  * @brief Provide credits for channel in LE Credit-Based Flow-Control Mode
697  * @param local_cid             L2CAP Channel Identifier
698  * @param credits               Number additional credits for peer
699  */
700 uint8_t l2cap_cbm_provide_credits(uint16_t local_cid, uint16_t credits);
701 
702 //
703 // L2CAP Connection-Oriented Channels in Enhanced Credit-Based Flow-Control Mode - ECBM
704 //
705 
706 /**
707  * @brief Register L2CAP service in Enhanced Credit-Based Flow-Control Mode
708  * @note MTU and initial credits are specified in l2cap_enhanced_accept_connection(..) call
709  * @param packet_handler
710  * @param psm
711  * @param min_remote_mtu
712  * @param security_level
713  * @return status
714  */
715 uint8_t l2cap_ecbm_register_service(btstack_packet_handler_t packet_handler, uint16_t psm, uint16_t min_remote_mtu, gap_security_level_t security_level);
716 
717 /**
718  * @brief Unregister L2CAP service in Enhanced Credit-Based Flow-Control Mode
719  * @param psm
720  * @return status
721  */
722 
723 uint8_t l2cap_ecbm_unregister_service(uint16_t psm);
724 
725 /**
726  * @brief Set Minimal MPS for channel in Enhanced Credit-Based Flow-Control Mode
727  * @param mps_min
728  */
729 void l2cap_ecbm_mps_set_min(uint16_t mps_min);
730 
731 /**
732  * @brief Set Minimal MPS for channel in Enhanced Credit-Based Flow-Control Mode
733  * @param mps_max
734  */
735 void l2cap_ecbm_mps_set_max(uint16_t mps_max);
736 
737 /**
738  * @brief Create outgoing channel in Enhanced Credit-Based Flow-Control Mode
739  * @note receive_buffer points to an array of receive buffers with num_channels elements
740  * @note out_local_cid points to an array where CID is stored with num_channel elements
741  * @param packet_handler        Packet handler for this connection
742  * @param con_handle            HCI Connection Handle
743  * @param security_level        Minimum required security level
744  * @param psm                   Service PSM to connect to
745  * @param num_channels          number of channels to create
746  * @param initial_credits       Number of initial credits provided to peer per channel or L2CAP_LE_AUTOMATIC_CREDITS to enable automatic credits
747  * @param receive_buffer_size   buffer size equals MTU
748  * @param receive_buffers       Array of buffers used for reassembly of L2CAP Information Frames into service data unit (SDU) with given MTU
749  * @param out_local_cids        Array of L2CAP Channel Identifiers is stored here on success
750  * @return status
751  */
752 uint8_t l2cap_ecbm_create_channels(btstack_packet_handler_t packet_handler, hci_con_handle_t con_handle,
753                                        gap_security_level_t security_level,
754                                        uint16_t psm, uint8_t num_channels, uint16_t initial_credits, uint16_t receive_buffer_size,
755                                        uint8_t ** receive_buffers, uint16_t * out_local_cids);
756 
757 /**
758  * @brief  Accept incoming connection Enhanced Credit-Based Flow-Control Mode
759  * @param local_cid            from L2CAP_EVENT_INCOMING_DATA_CONNECTION
760  * @param num_channels
761  * @param initial_credits      Number of initial credits provided to peer per channel or L2CAP_LE_AUTOMATIC_CREDITS to enable automatic credits
762  * @param receive_buffer_size
763  * @param receive_buffers      Array of buffers used for reassembly of L2CAP Information Frames into service data unit (SDU) with given MTU
764  * @param out_local_cids       Array of L2CAP Channel Identifiers is stored here on success
765  * @return status
766  */
767 uint8_t l2cap_ecbm_accept_channels(uint16_t local_cid, uint8_t num_channels, uint16_t initial_credits,
768                                             uint16_t receive_buffer_size, uint8_t ** receive_buffers, uint16_t * out_local_cids);
769 /**
770  * @brief Decline connection in Enhanced Credit-Based Flow-Control Mode
771  * @param local_cid           from L2CAP_EVENT_INCOMING_DATA_CONNECTION
772  * @param result              See L2CAP_ECBM_CONNECTION_RESULT_ALL_SUCCESS in bluetooth.h
773  * @return status
774  */
775 uint8_t l2cap_ecbm_decline_channels(uint16_t local_cid, uint16_t result);
776 
777 /**
778  * @brief Provide credits for channel in Enhanced Credit-Based Flow-Control Mode
779  * @param local_cid             L2CAP Channel Identifier
780  * @param credits               Number additional credits for peer
781  * @return status
782  */
783 uint8_t l2cap_ecbm_provide_credits(uint16_t local_cid, uint16_t credits);
784 
785 /**
786  * @brief Request emission of L2CAP_EVENT_ECBM_CAN_SEND_NOW as soon as possible
787  * @note L2CAP_EVENT_ECBM_CAN_SEND_NOW might be emitted during call to this function
788  *       so packet handler should be ready to handle it
789  * @param local_cid             L2CAP Channel Identifier
790  * @return status
791  */
792 uint8_t l2cap_ecbm_request_can_send_now_event(uint16_t local_cid);
793 
794 /**
795  * @brief Reconfigure MPS/MTU of local channels
796  * @param num_cids
797  * @param local_cids            array of local_cids to reconfigure
798  * @param receive_buffer_size   buffer size equals MTU
799  * @param receive_buffers       Array of buffers used for reassembly of L2CAP Information Frames into service data unit (SDU) with given MTU
800  * @return status
801  */
802 uint8_t l2cap_ecbm_reconfigure_channels(uint8_t num_cids, uint16_t * local_cids, int16_t receive_buffer_size, uint8_t ** receive_buffers);
803 
804 /**
805  * @brief De-Init L2CAP
806  */
807 void l2cap_deinit(void);
808 
809 /* API_END */
810 
811 
812 // @deprecated - please use l2cap_ertm_create_channel
813 uint8_t l2cap_create_ertm_channel(btstack_packet_handler_t packet_handler, bd_addr_t address, uint16_t psm,  l2cap_ertm_config_t * ertm_contig, uint8_t * buffer, uint32_t size, uint16_t * out_local_cid);
814 
815 // @deprecated - please use l2cap_ertm_accept_connection
816 uint8_t l2cap_accept_ertm_connection(uint16_t local_cid, l2cap_ertm_config_t * ertm_contig, uint8_t * buffer, uint32_t size);
817 
818 // @deprecated - please use l2cap_cbm_register_service
819 uint8_t l2cap_le_register_service(btstack_packet_handler_t packet_handler, uint16_t psm, gap_security_level_t security_level);
820 
821 // @deprecated - please use l2cap_cbm_unregister_service
822 uint8_t l2cap_le_unregister_service(uint16_t psm);
823 
824 // @deprecated - please use l2cap_cbm_accept_connection
825 uint8_t l2cap_le_accept_connection(uint16_t local_cid, uint8_t * receive_sdu_buffer, uint16_t mtu, uint16_t initial_credits);
826 
827 // @deprecated - please use l2cap_cbm_decline_connection
828 uint8_t l2cap_le_decline_connection(uint16_t local_cid);
829 
830 // @deprecated - please use l2cap_cbm_create_channel
831 uint8_t l2cap_le_create_channel(btstack_packet_handler_t packet_handler, hci_con_handle_t con_handle,
832                                 uint16_t psm, uint8_t * receive_sdu_buffer, uint16_t mtu, uint16_t initial_credits, gap_security_level_t security_level,
833                                 uint16_t * out_local_cid);
834 
835 // @deprecated - please use l2cap_cbm_decline_connection
836 uint8_t l2cap_le_provide_credits(uint16_t local_cid, uint16_t credits);
837 
838 // @deprecated - please use l2cap_cbm_can_send_now
839 bool l2cap_le_can_send_now(uint16_t local_cid);
840 
841 // @deprecated - please use l2cap_cbm_request_can_send_now_event
842 uint8_t l2cap_le_request_can_send_now_event(uint16_t local_cid);
843 
844 // @deprecated - please use l2cap_send_data
845 uint8_t l2cap_le_send_data(uint16_t local_cid, const uint8_t * data, uint16_t size);
846 
847 // @deprecated - please use l2cap_disconnect
848 uint8_t l2cap_le_disconnect(uint16_t local_cid);
849 
850 // @deprecated - please use l2cap_can_send_now
851 bool l2cap_cbm_can_send_now(uint16_t local_cid);
852 
853 // @deprecated - please use l2cap_request_can_send_now_event
854 uint8_t l2cap_cbm_request_can_send_now_event(uint16_t local_cid);
855 
856 
857 #if defined __cplusplus
858 }
859 #endif
860 
861 #endif // L2CAP_H
862