1 /* 2 * Copyright (C) 2009 by Matthias Ringwald 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 20 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 21 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 27 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 */ 31 32 /* 33 * hci.h 34 * 35 * Created by Matthias Ringwald on 4/29/09. 36 * 37 */ 38 39 #pragma once 40 41 #include <btstack/hci_cmds.h> 42 #include <btstack/utils.h> 43 #include "hci_transport.h" 44 #include "bt_control.h" 45 #include "remote_device_db.h" 46 47 #include <stdint.h> 48 #include <stdlib.h> 49 #include <stdarg.h> 50 51 #if defined __cplusplus 52 extern "C" { 53 #endif 54 55 // packet header lenghts 56 #define HCI_CMD_DATA_PKT_HDR 0x03 57 #define HCI_ACL_DATA_PKT_HDR 0x04 58 #define HCI_SCO_DATA_PKT_HDR 0x03 59 #define HCI_EVENT_PKT_HDR 0x02 60 61 // packet sizes 62 #define HCI_ACL_3DH5_SIZE 1021 63 #define HCI_ACL_DH5_SIZE 339 64 65 // OGFs 66 #define OGF_LINK_CONTROL 0x01 67 #define OGF_LINK_POLICY 0x02 68 #define OGF_CONTROLLER_BASEBAND 0x03 69 #define OGF_INFORMATIONAL_PARAMETERS 0x04 70 #define OGF_BTSTACK 0x3d 71 #define OGF_VENDOR 0x3f 72 73 // cmds for BTstack 74 // get state: @returns HCI_STATE 75 #define BTSTACK_GET_STATE 0x01 76 77 // set power mode: @param HCI_POWER_MODE 78 #define BTSTACK_SET_POWER_MODE 0x02 79 80 // set capture mode: @param on 81 #define BTSTACK_SET_ACL_CAPTURE_MODE 0x03 82 83 // get BTstack version 84 #define BTSTACK_GET_VERSION 0x04 85 86 // get system Bluetooth state 87 #define BTSTACK_GET_SYSTEM_BLUETOOTH_ENABLED 0x05 88 89 // set system Bluetooth state 90 #define BTSTACK_SET_SYSTEM_BLUETOOTH_ENABLED 0x06 91 92 // enable inquiry scan for this client 93 #define BTSTACK_SET_DISCOVERABLE 0x07 94 95 // set global Bluetooth state 96 #define BTSTACK_SET_BLUETOOTH_ENABLED 0x08 97 98 // create l2cap channel: @param bd_addr(48), psm (16) 99 #define L2CAP_CREATE_CHANNEL 0x20 100 101 // disconnect l2cap disconnect, @param channel(16), reason(8) 102 #define L2CAP_DISCONNECT 0x21 103 104 // register l2cap service: @param psm(16), mtu (16) 105 #define L2CAP_REGISTER_SERVICE 0x22 106 107 // unregister l2cap disconnect, @param psm(16) 108 #define L2CAP_UNREGISTER_SERVICE 0x23 109 110 // accept connection @param bd_addr(48), dest cid (16) 111 #define L2CAP_ACCEPT_CONNECTION 0x24 112 113 // decline l2cap disconnect,@param bd_addr(48), dest cid (16), reason(8) 114 #define L2CAP_DECLINE_CONNECTION 0x25 115 116 // create l2cap channel: @param bd_addr(48), psm (16), mtu (16) 117 #define L2CAP_CREATE_CHANNEL_MTU 0x26 118 119 // register SDP Service Record: service record (size) 120 #define SDP_REGISTER_SERVICE_RECORD 0x30 121 122 // unregister SDP Service Record 123 #define SDP_UNREGISTER_SERVICE_RECORD 0x31 124 125 // RFCOMM "HCI" Commands 126 #define RFCOMM_CREATE_CHANNEL 0x40 127 #define RFCOMM_DISCONNECT 0x41 128 #define RFCOMM_REGISTER_SERVICE 0x42 129 #define RFCOMM_UNREGISTER_SERVICE 0x43 130 #define RFCOMM_ACCEPT_CONNECTION 0x44 131 #define RFCOMM_DECLINE_CONNECTION 0x45 132 #define RFCOMM_PERSISTENT_CHANNEL 0x46 133 134 // 135 #define IS_COMMAND(packet, command) (READ_BT_16(packet,0) == command.opcode) 136 137 // data: event(8) 138 #define DAEMON_EVENT_CONNECTION_OPENED 0x50 139 140 // data: event(8) 141 #define DAEMON_EVENT_CONNECTION_CLOSED 0x51 142 143 // data: event(8), nr_connections(8) 144 #define DAEMON_NR_CONNECTIONS_CHANGED 0x52 145 146 // data: event(8) 147 #define DAEMON_EVENT_NEW_RFCOMM_CREDITS 0x53 148 149 // data: event() 150 #define DAEMON_EVENT_HCI_PACKET_SENT 0x54 151 152 /** 153 * Connection State 154 */ 155 typedef enum { 156 AUTH_FLAGS_NONE = 0x00, 157 RECV_LINK_KEY_REQUEST = 0x01, 158 HANDLE_LINK_KEY_REQUEST = 0x02, 159 SENT_LINK_KEY_REPLY = 0x04, 160 SENT_LINK_KEY_NEGATIVE_REQUEST = 0x08, 161 RECV_LINK_KEY_NOTIFICATION = 0x10, 162 RECV_PIN_CODE_REQUEST = 0x20, 163 SENT_PIN_CODE_REPLY = 0x40, 164 SENT_PIN_CODE_NEGATIVE_REPLY = 0x80 165 } hci_authentication_flags_t; 166 167 typedef enum { 168 SENT_CREATE_CONNECTION = 1, 169 RECEIVED_CONNECTION_REQUEST, 170 ACCEPTED_CONNECTION_REQUEST, 171 REJECTED_CONNECTION_REQUEST, 172 OPEN, 173 SENT_DISCONNECT 174 } CONNECTION_STATE; 175 176 typedef enum { 177 BLUETOOTH_OFF = 1, 178 BLUETOOTH_ON, 179 BLUETOOTH_ACTIVE 180 } BLUETOOTH_STATE; 181 182 typedef struct { 183 // linked list - assert: first field 184 linked_item_t item; 185 186 // remote side 187 bd_addr_t address; 188 189 // module handle 190 hci_con_handle_t con_handle; 191 192 // state 193 CONNECTION_STATE state; 194 195 // errands 196 hci_authentication_flags_t authentication_flags; 197 198 #ifdef HAVE_TIME 199 // timer 200 timer_source_t timeout; 201 struct timeval timestamp; 202 #endif 203 204 // ACL packet recombination 205 uint8_t acl_recombination_buffer[4 + HCI_ACL_3DH5_SIZE]; 206 uint16_t acl_recombination_pos; 207 uint16_t acl_recombination_length; 208 209 // number ACL packets sent to controller 210 uint8_t num_acl_packets_sent; 211 212 } hci_connection_t; 213 214 /** 215 * main data structure 216 */ 217 typedef struct { 218 // transport component with configuration 219 hci_transport_t * hci_transport; 220 void * config; 221 222 // hardware power controller 223 bt_control_t * control; 224 225 // list of existing baseband connections 226 linked_list_t connections; 227 228 // single buffer for HCI Command assembly 229 uint8_t * hci_cmd_buffer; 230 231 /* host to controller flow control */ 232 uint8_t num_cmd_packets; 233 // uint8_t total_num_cmd_packets; 234 uint8_t total_num_acl_packets; 235 uint16_t acl_data_packet_length; 236 237 /* callback to L2CAP layer */ 238 void (*packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size); 239 240 /* remote device db */ 241 remote_device_db_t *remote_device_db; 242 243 /* hci state machine */ 244 HCI_STATE state; 245 uint8_t substate; 246 uint8_t cmds_ready; 247 248 /* */ 249 uint8_t discoverable; 250 251 } hci_stack_t; 252 253 // create and send hci command packets based on a template and a list of parameters 254 uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...); 255 uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr); 256 257 // set up HCI 258 void hci_init(hci_transport_t *transport, void *config, bt_control_t *control, remote_device_db_t * remote_device_db); 259 void hci_register_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size)); 260 void hci_close(void); 261 262 // power and inquriy scan control 263 int hci_power_control(HCI_POWER_MODE mode); 264 void hci_discoverable_control(uint8_t enable); 265 266 /** 267 * run the hci control loop once 268 */ 269 void hci_run(void); 270 271 // create and send hci command packets based on a template and a list of parameters 272 int hci_send_cmd(const hci_cmd_t *cmd, ...); 273 274 // send complete CMD packet 275 int hci_send_cmd_packet(uint8_t *packet, int size); 276 277 // send ACL packet 278 int hci_send_acl_packet(uint8_t *packet, int size); 279 280 // non-blocking UART driver needs 281 int hci_can_send_packet_now(uint8_t packet_type); 282 283 hci_connection_t * connection_for_handle(hci_con_handle_t con_handle); 284 uint8_t hci_number_outgoing_packets(hci_con_handle_t handle); 285 uint8_t hci_number_free_acl_slots(void); 286 int hci_authentication_active_for_handle(hci_con_handle_t handle); 287 void hci_drop_link_key_for_bd_addr(bd_addr_t *addr); 288 uint16_t hci_max_acl_data_packet_length(void); 289 290 // 291 void hci_emit_state(void); 292 void hci_emit_connection_complete(hci_connection_t *conn); 293 void hci_emit_l2cap_check_timeout(hci_connection_t *conn); 294 void hci_emit_disconnection_complete(uint16_t handle, uint8_t reason); 295 void hci_emit_nr_connections_changed(void); 296 void hci_emit_hci_open_failed(void); 297 void hci_emit_btstack_version(void); 298 void hci_emit_system_bluetooth_enabled(uint8_t enabled); 299 void hci_emit_remote_name_cached(bd_addr_t *addr, device_name_t *name); 300 void hci_emit_discoverable_enabled(uint8_t enabled); 301 302 #if defined __cplusplus 303 } 304 #endif 305