xref: /btstack/src/hci.h (revision 27d86fbbd8047bb24489c195f70a26fa37be252c)
1 /*
2  * Copyright (C) 2009 by Matthias Ringwald
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holders nor the names of
14  *    contributors may be used to endorse or promote products derived
15  *    from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
21  * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
24  * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
25  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
27  * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  *
30  */
31 
32 /*
33  *  hci.h
34  *
35  *  Created by Matthias Ringwald on 4/29/09.
36  *
37  */
38 
39 #pragma once
40 
41 #include <btstack/hci_cmds.h>
42 #include <btstack/utils.h>
43 #include "hci_transport.h"
44 #include "bt_control.h"
45 #include "remote_device_db.h"
46 
47 #include <stdint.h>
48 #include <stdlib.h>
49 #include <stdarg.h>
50 
51 #if defined __cplusplus
52 extern "C" {
53 #endif
54 
55 // packet header lenghts
56 #define HCI_CMD_DATA_PKT_HDR	  0x03
57 #define HCI_ACL_DATA_PKT_HDR	  0x04
58 #define HCI_SCO_DATA_PKT_HDR	  0x03
59 #define HCI_EVENT_PKT_HDR         0x02
60 
61 // packet sizes
62 #define HCI_ACL_3DH5_SIZE         1021
63 #define HCI_ACL_DH5_SIZE           339
64 
65 // OGFs
66 #define OGF_LINK_CONTROL          0x01
67 #define OGF_LINK_POLICY           0x02
68 #define OGF_CONTROLLER_BASEBAND   0x03
69 #define OGF_INFORMATIONAL_PARAMETERS 0x04
70 #define OGF_BTSTACK 0x3d
71 #define OGF_VENDOR  0x3f
72 
73 // cmds for BTstack
74 // get state: @returns HCI_STATE
75 #define BTSTACK_GET_STATE                                  0x01
76 
77 // set power mode: @param HCI_POWER_MODE
78 #define BTSTACK_SET_POWER_MODE                             0x02
79 
80 // set capture mode: @param on
81 #define BTSTACK_SET_ACL_CAPTURE_MODE                       0x03
82 
83 // get BTstack version
84 #define BTSTACK_GET_VERSION                                0x04
85 
86 // get system Bluetooth state
87 #define BTSTACK_GET_SYSTEM_BLUETOOTH_ENABLED               0x05
88 
89 // set system Bluetooth state
90 #define BTSTACK_SET_SYSTEM_BLUETOOTH_ENABLED               0x06
91 
92 // create l2cap channel: @param bd_addr(48), psm (16)
93 #define L2CAP_CREATE_CHANNEL                               0x20
94 
95 // disconnect l2cap disconnect, @param channel(16), reason(8)
96 #define L2CAP_DISCONNECT                                   0x21
97 
98 // register l2cap service: @param psm(16), mtu (16)
99 #define L2CAP_REGISTER_SERVICE                             0x22
100 
101 // unregister l2cap disconnect, @param psm(16)
102 #define L2CAP_UNREGISTER_SERVICE                           0x23
103 
104 // accept connection @param bd_addr(48), dest cid (16)
105 #define L2CAP_ACCEPT_CONNECTION                            0x24
106 
107 // decline l2cap disconnect,@param bd_addr(48), dest cid (16), reason(8)
108 #define L2CAP_DECLINE_CONNECTION                           0x25
109 
110 // create l2cap channel: @param bd_addr(48), psm (16), mtu (16)
111 #define L2CAP_CREATE_CHANNEL_MTU                           0x26
112 
113 // register SDP Service Record: service record (size)
114 #define SDP_REGISTER_SERVICE_RECORD                        0x30
115 
116 // unregister SDP Service Record
117 #define SDP_UNREGISTER_SERVICE_RECORD                      0x31
118 
119 
120 //
121 #define IS_COMMAND(packet, command) (READ_BT_16(packet,0) == command.opcode)
122 
123 // data: event(8)
124 #define DAEMON_EVENT_CONNECTION_OPENED                     0x70
125 
126 // data: event(8)
127 #define DAEMON_EVENT_CONNECTION_CLOSED                     0x71
128 
129 // data: event(8), nr_connections(8)
130 #define DAEMON_NR_CONNECTIONS_CHANGED                      0x72
131 
132 
133 
134 /**
135  * Connection State
136  */
137 typedef enum {
138     RECV_LINK_KEY_REQUEST          = 0x01,
139     SENT_LINK_KEY_REPLY            = 0x02,
140     SENT_LINK_KEY_NEGATIVE_REQUEST = 0x04,
141     RECV_LINK_KEY_NOTIFICATION     = 0x08,
142     RECV_PIN_CODE_REQUEST          = 0x10,
143     SENT_PIN_CODE_REPLY            = 0x20,
144     SENT_PIN_CODE_NEGATIVE_REPLY   = 0x40
145 } hci_authentication_flags_t;
146 
147 typedef enum {
148     SENT_CREATE_CONNECTION = 1,
149     RECEIVED_CONNECTION_REQUEST,
150     ACCEPTED_CONNECTION_REQUEST,
151     REJECTED_CONNECTION_REQUEST,
152     OPEN,
153     SENT_DISCONNECT
154 } CONNECTION_STATE;
155 
156 typedef enum {
157     BLUETOOTH_OFF = 1,
158     BLUETOOTH_ON,
159     BLUETOOTH_ACTIVE
160 } BLUETOOTH_STATE;
161 
162 typedef struct {
163     // linked list - assert: first field
164     linked_item_t    item;
165 
166     // remote side
167     bd_addr_t address;
168 
169     // module handle
170     hci_con_handle_t con_handle;
171 
172     // state
173     CONNECTION_STATE state;
174 
175     // errands
176     hci_authentication_flags_t authentication_flags;
177 
178     // timer
179     timer_source_t timeout;
180     struct timeval timestamp;
181 
182     // ACL packet recombination
183     uint8_t  acl_recombination_buffer[HCI_ACL_3DH5_SIZE]; // max packet: DH5 = header(4) + payload (339)
184     uint16_t acl_recombination_pos;
185     uint16_t acl_recombination_length;
186 
187     // number ACL packets sent to controller
188     uint8_t num_acl_packets_sent;
189 
190 } hci_connection_t;
191 
192 /**
193  * main data structure
194  */
195 typedef struct {
196     // transport component with configuration
197     hci_transport_t  * hci_transport;
198     void             * config;
199 
200     // hardware power controller
201     bt_control_t     * control;
202 
203     // list of existing baseband connections
204     linked_list_t     connections;
205 
206     // single buffer for HCI Command assembly
207     uint8_t          * hci_cmd_buffer;
208 
209     /* host to controller flow control */
210     uint8_t  num_cmd_packets;
211     // uint8_t  total_num_cmd_packets;
212     uint8_t  total_num_acl_packets;
213     uint16_t acl_data_packet_length;
214 
215     /* callback to L2CAP layer */
216     void (*packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size);
217 
218     /* remote device db */
219     remote_device_db_t *remote_device_db;
220 
221     /* hci state machine */
222     HCI_STATE state;
223     uint8_t   substate;
224     uint8_t   cmds_ready;
225 
226 } hci_stack_t;
227 
228 // create and send hci command packets based on a template and a list of parameters
229 uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...);
230 uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr);
231 
232 // set up HCI
233 void hci_init(hci_transport_t *transport, void *config, bt_control_t *control, remote_device_db_t * remote_device_db);
234 void hci_register_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size));
235 void hci_close();
236 
237 // power control
238 int hci_power_control(HCI_POWER_MODE mode);
239 
240 /**
241  * run the hci control loop once
242  */
243 void hci_run();
244 
245 // create and send hci command packets based on a template and a list of parameters
246 int hci_send_cmd(const hci_cmd_t *cmd, ...);
247 
248 // send complete CMD packet
249 int hci_send_cmd_packet(uint8_t *packet, int size);
250 
251 // send ACL packet
252 int hci_send_acl_packet(uint8_t *packet, int size);
253 
254 hci_connection_t * connection_for_handle(hci_con_handle_t con_handle);
255 uint8_t hci_number_outgoing_packets(hci_con_handle_t handle);
256 uint8_t hci_number_free_acl_slots();
257 int     hci_ready_to_send(hci_con_handle_t handle);
258 int     hci_authentication_active_for_handle(hci_con_handle_t handle);
259 void    hci_drop_link_key_for_bd_addr(bd_addr_t *addr);
260 uint16_t hci_max_acl_data_packet_length();
261 
262 //
263 void hci_emit_state();
264 void hci_emit_connection_complete(hci_connection_t *conn);
265 void hci_emit_l2cap_check_timeout(hci_connection_t *conn);
266 void hci_emit_nr_connections_changed();
267 void hci_emit_hci_open_failed();
268 void hci_emit_btstack_version();
269 void hci_emit_system_bluetooth_enabled(uint8_t enabled);
270 void hci_emit_remote_name_cached(bd_addr_t *addr, device_name_t *name);
271 
272 #if defined __cplusplus
273 }
274 #endif
275