1 /* 2 * Copyright (C) 2009 by Matthias Ringwald 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS 18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 19 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 20 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 21 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 24 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 27 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 */ 31 32 /* 33 * hci.h 34 * 35 * Created by Matthias Ringwald on 4/29/09. 36 * 37 */ 38 39 #pragma once 40 41 #include <btstack/hci_cmds.h> 42 #include <btstack/utils.h> 43 #include "hci_transport.h" 44 #include "bt_control.h" 45 #include "remote_device_db.h" 46 47 #include <stdint.h> 48 #include <stdlib.h> 49 #include <stdarg.h> 50 51 #if defined __cplusplus 52 extern "C" { 53 #endif 54 55 // packet header lenghts 56 #define HCI_CMD_DATA_PKT_HDR 0x03 57 #define HCI_ACL_DATA_PKT_HDR 0x04 58 #define HCI_SCO_DATA_PKT_HDR 0x03 59 #define HCI_EVENT_PKT_HDR 0x02 60 61 // packet sizes 62 #define HCI_ACL_3DH5_SIZE 1021 63 #define HCI_ACL_DH5_SIZE 339 64 65 // OGFs 66 #define OGF_LINK_CONTROL 0x01 67 #define OGF_LINK_POLICY 0x02 68 #define OGF_CONTROLLER_BASEBAND 0x03 69 #define OGF_INFORMATIONAL_PARAMETERS 0x04 70 #define OGF_BTSTACK 0x3d 71 #define OGF_VENDOR 0x3f 72 73 // cmds for BTstack 74 // get state: @returns HCI_STATE 75 #define BTSTACK_GET_STATE 0x01 76 77 // set power mode: @param HCI_POWER_MODE 78 #define BTSTACK_SET_POWER_MODE 0x02 79 80 // set capture mode: @param on 81 #define BTSTACK_SET_ACL_CAPTURE_MODE 0x03 82 83 // get BTstack version 84 #define BTSTACK_GET_VERSION 0x04 85 86 // get system Bluetooth state 87 #define BTSTACK_GET_SYSTEM_BLUETOOTH_ENABLED 0x05 88 89 // set system Bluetooth state 90 #define BTSTACK_SET_SYSTEM_BLUETOOTH_ENABLED 0x06 91 92 // enable inquiry scan for this client 93 #define BTSTACK_SET_DISCOVERABLE 0x07 94 95 // set global Bluetooth state 96 #define BTSTACK_SET_BLUETOOTH_ENABLED 0x08 97 98 // create l2cap channel: @param bd_addr(48), psm (16) 99 #define L2CAP_CREATE_CHANNEL 0x20 100 101 // disconnect l2cap disconnect, @param channel(16), reason(8) 102 #define L2CAP_DISCONNECT 0x21 103 104 // register l2cap service: @param psm(16), mtu (16) 105 #define L2CAP_REGISTER_SERVICE 0x22 106 107 // unregister l2cap disconnect, @param psm(16) 108 #define L2CAP_UNREGISTER_SERVICE 0x23 109 110 // accept connection @param bd_addr(48), dest cid (16) 111 #define L2CAP_ACCEPT_CONNECTION 0x24 112 113 // decline l2cap disconnect,@param bd_addr(48), dest cid (16), reason(8) 114 #define L2CAP_DECLINE_CONNECTION 0x25 115 116 // create l2cap channel: @param bd_addr(48), psm (16), mtu (16) 117 #define L2CAP_CREATE_CHANNEL_MTU 0x26 118 119 // register SDP Service Record: service record (size) 120 #define SDP_REGISTER_SERVICE_RECORD 0x30 121 122 // unregister SDP Service Record 123 #define SDP_UNREGISTER_SERVICE_RECORD 0x31 124 125 // RFCOMM "HCI" Commands 126 #define RFCOMM_CREATE_CHANNEL 0x40 127 #define RFCOMM_DISCONNECT 0x41 128 #define RFCOMM_REGISTER_SERVICE 0x42 129 #define RFCOMM_UNREGISTER_SERVICE 0x43 130 #define RFCOMM_ACCEPT_CONNECTION 0x44 131 #define RFCOMM_DECLINE_CONNECTION 0x45 132 #define RFCOMM_PERSISTENT_CHANNEL 0x46 133 134 // 135 #define IS_COMMAND(packet, command) (READ_BT_16(packet,0) == command.opcode) 136 137 // data: event(8) 138 #define DAEMON_EVENT_CONNECTION_OPENED 0x70 139 140 // data: event(8) 141 #define DAEMON_EVENT_CONNECTION_CLOSED 0x71 142 143 // data: event(8), nr_connections(8) 144 #define DAEMON_NR_CONNECTIONS_CHANGED 0x72 145 146 147 148 /** 149 * Connection State 150 */ 151 typedef enum { 152 RECV_LINK_KEY_REQUEST = 0x01, 153 SENT_LINK_KEY_REPLY = 0x02, 154 SENT_LINK_KEY_NEGATIVE_REQUEST = 0x04, 155 RECV_LINK_KEY_NOTIFICATION = 0x08, 156 RECV_PIN_CODE_REQUEST = 0x10, 157 SENT_PIN_CODE_REPLY = 0x20, 158 SENT_PIN_CODE_NEGATIVE_REPLY = 0x40 159 } hci_authentication_flags_t; 160 161 typedef enum { 162 SENT_CREATE_CONNECTION = 1, 163 RECEIVED_CONNECTION_REQUEST, 164 ACCEPTED_CONNECTION_REQUEST, 165 REJECTED_CONNECTION_REQUEST, 166 OPEN, 167 SENT_DISCONNECT 168 } CONNECTION_STATE; 169 170 typedef enum { 171 BLUETOOTH_OFF = 1, 172 BLUETOOTH_ON, 173 BLUETOOTH_ACTIVE 174 } BLUETOOTH_STATE; 175 176 typedef struct { 177 // linked list - assert: first field 178 linked_item_t item; 179 180 // remote side 181 bd_addr_t address; 182 183 // module handle 184 hci_con_handle_t con_handle; 185 186 // state 187 CONNECTION_STATE state; 188 189 // errands 190 hci_authentication_flags_t authentication_flags; 191 192 #ifdef HAVE_TIME 193 // timer 194 timer_source_t timeout; 195 struct timeval timestamp; 196 #endif 197 198 // ACL packet recombination 199 uint8_t acl_recombination_buffer[HCI_ACL_3DH5_SIZE]; // max packet: DH5 = header(4) + payload (339) 200 uint16_t acl_recombination_pos; 201 uint16_t acl_recombination_length; 202 203 // number ACL packets sent to controller 204 uint8_t num_acl_packets_sent; 205 206 } hci_connection_t; 207 208 /** 209 * main data structure 210 */ 211 typedef struct { 212 // transport component with configuration 213 hci_transport_t * hci_transport; 214 void * config; 215 216 // hardware power controller 217 bt_control_t * control; 218 219 // list of existing baseband connections 220 linked_list_t connections; 221 222 // single buffer for HCI Command assembly 223 uint8_t * hci_cmd_buffer; 224 225 /* host to controller flow control */ 226 uint8_t num_cmd_packets; 227 // uint8_t total_num_cmd_packets; 228 uint8_t total_num_acl_packets; 229 uint16_t acl_data_packet_length; 230 231 /* callback to L2CAP layer */ 232 void (*packet_handler)(uint8_t packet_type, uint8_t *packet, uint16_t size); 233 234 /* remote device db */ 235 remote_device_db_t *remote_device_db; 236 237 /* hci state machine */ 238 HCI_STATE state; 239 uint8_t substate; 240 uint8_t cmds_ready; 241 242 /* */ 243 uint8_t discoverable; 244 245 } hci_stack_t; 246 247 // create and send hci command packets based on a template and a list of parameters 248 uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...); 249 uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr); 250 251 // set up HCI 252 void hci_init(hci_transport_t *transport, void *config, bt_control_t *control, remote_device_db_t * remote_device_db); 253 void hci_register_packet_handler(void (*handler)(uint8_t packet_type, uint8_t *packet, uint16_t size)); 254 void hci_close(); 255 256 // power and inquriy scan control 257 int hci_power_control(HCI_POWER_MODE mode); 258 void hci_discoverable_control(uint8_t enable); 259 260 /** 261 * run the hci control loop once 262 */ 263 void hci_run(); 264 265 // create and send hci command packets based on a template and a list of parameters 266 int hci_send_cmd(const hci_cmd_t *cmd, ...); 267 268 // send complete CMD packet 269 int hci_send_cmd_packet(uint8_t *packet, int size); 270 271 // send ACL packet 272 int hci_send_acl_packet(uint8_t *packet, int size); 273 274 hci_connection_t * connection_for_handle(hci_con_handle_t con_handle); 275 uint8_t hci_number_outgoing_packets(hci_con_handle_t handle); 276 uint8_t hci_number_free_acl_slots(); 277 int hci_ready_to_send(hci_con_handle_t handle); 278 int hci_authentication_active_for_handle(hci_con_handle_t handle); 279 void hci_drop_link_key_for_bd_addr(bd_addr_t *addr); 280 uint16_t hci_max_acl_data_packet_length(); 281 282 // 283 void hci_emit_state(); 284 void hci_emit_connection_complete(hci_connection_t *conn); 285 void hci_emit_l2cap_check_timeout(hci_connection_t *conn); 286 void hci_emit_disconnection_complete(uint16_t handle, uint8_t reason); 287 void hci_emit_nr_connections_changed(); 288 void hci_emit_hci_open_failed(); 289 void hci_emit_btstack_version(); 290 void hci_emit_system_bluetooth_enabled(uint8_t enabled); 291 void hci_emit_remote_name_cached(bd_addr_t *addr, device_name_t *name); 292 void hci_emit_discoverable_enabled(uint8_t enabled); 293 294 #if defined __cplusplus 295 } 296 #endif 297