1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN 24 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 /** 39 * @title Genral Access Profile (GAP) 40 * 41 */ 42 43 #ifndef GAP_H 44 #define GAP_H 45 46 #if defined __cplusplus 47 extern "C" { 48 #endif 49 50 #include "btstack_defines.h" 51 #include "btstack_util.h" 52 53 #ifdef ENABLE_CLASSIC 54 #include "classic/btstack_link_key_db.h" 55 #endif 56 57 // BIG has up to 2 BIS (stereo) 58 #ifndef MAX_NR_BIS 59 #define MAX_NR_BIS 2 60 #endif 61 62 // CIG usually has up to 2 CIS (stereo) 63 #ifndef MAX_NR_CIS 64 #define MAX_NR_CIS 2 65 #endif 66 67 typedef enum { 68 69 // MITM protection not required 70 // No encryption required 71 // No user interaction required 72 LEVEL_0 = 0, 73 74 // MITM protection not required 75 // No encryption required 76 // Minimal user interaction desired 77 LEVEL_1, 78 79 // MITM protection not required 80 // Encryption required 81 LEVEL_2, 82 83 // MITM protection required 84 // Encryption required 85 // User interaction acceptable 86 LEVEL_3, 87 88 // MITM protection required 89 // Encryption required 90 // 128-bit equivalent strength for link and encryption keys required (P-192 is not enough) 91 // User interaction acceptable 92 LEVEL_4, 93 } gap_security_level_t; 94 95 96 typedef enum { 97 // non-secure 98 GAP_SECURITY_MODE_1 = 1, 99 100 // service level enforced security 101 GAP_SECURITY_MODE_2, 102 103 // link level enforced security 104 GAP_SECURITY_MODE_3, 105 106 // service level enforced security 107 GAP_SECURITY_MODE_4 108 } gap_security_mode_t; 109 110 typedef enum { 111 GAP_SECURITY_NONE, 112 GAP_SECURITY_ENCRYPTED, // SSP: JUST WORKS 113 GAP_SECURITY_AUTHENTICATED, // SSP: numeric comparison, passkey, OOB 114 // GAP_SECURITY_AUTHORIZED 115 } gap_security_state; 116 117 typedef enum { 118 GAP_CONNECTION_INVALID, 119 GAP_CONNECTION_ACL, 120 GAP_CONNECTION_SCO, 121 GAP_CONNECTION_LE 122 } gap_connection_type_t; 123 124 typedef struct le_connection_parameter_range{ 125 uint16_t le_conn_interval_min; 126 uint16_t le_conn_interval_max; 127 uint16_t le_conn_latency_min; 128 uint16_t le_conn_latency_max; 129 uint16_t le_supervision_timeout_min; 130 uint16_t le_supervision_timeout_max; 131 } le_connection_parameter_range_t; 132 133 typedef enum { 134 GAP_RANDOM_ADDRESS_TYPE_OFF = 0, 135 GAP_RANDOM_ADDRESS_TYPE_STATIC, 136 GAP_RANDOM_ADDRESS_NON_RESOLVABLE, 137 GAP_RANDOM_ADDRESS_RESOLVABLE, 138 } gap_random_address_type_t; 139 140 // Authorization state 141 typedef enum { 142 AUTHORIZATION_UNKNOWN, 143 AUTHORIZATION_PENDING, 144 AUTHORIZATION_DECLINED, 145 AUTHORIZATION_GRANTED 146 } authorization_state_t; 147 148 // Extended Advertising Parameters 149 typedef struct { 150 uint16_t advertising_event_properties; 151 uint16_t primary_advertising_interval_min; 152 uint16_t primary_advertising_interval_max; 153 uint8_t primary_advertising_channel_map; 154 bd_addr_type_t own_address_type; 155 bd_addr_type_t peer_address_type; 156 bd_addr_t peer_address; 157 uint8_t advertising_filter_policy; 158 int8_t advertising_tx_power; 159 uint8_t primary_advertising_phy; 160 uint8_t secondary_advertising_max_skip; 161 uint8_t secondary_advertising_phy; 162 uint8_t advertising_sid; 163 uint8_t scan_request_notification_enable; 164 } le_extended_advertising_parameters_t; 165 166 typedef struct { 167 uint16_t periodic_advertising_interval_min; 168 uint16_t periodic_advertising_interval_max; 169 uint16_t periodic_advertising_properties; 170 } le_periodic_advertising_parameters_t; 171 172 // Extended Advertising Set State 173 typedef struct { 174 btstack_linked_item_t item; 175 le_extended_advertising_parameters_t extended_params; 176 le_periodic_advertising_parameters_t periodic_params; 177 bd_addr_t random_address; 178 const uint8_t * adv_data; 179 const uint8_t * scan_data; 180 const uint8_t * periodic_data; 181 uint16_t adv_data_len; 182 uint16_t scan_data_len; 183 uint16_t periodic_data_len; 184 uint16_t adv_data_pos; 185 uint16_t scan_data_pos; 186 uint16_t periodic_data_pos; 187 uint16_t enable_timeout; 188 uint8_t advertising_handle; 189 uint8_t enable_max_scan_events; 190 bool periodic_include_adi; 191 uint8_t state; 192 uint8_t tasks; 193 } le_advertising_set_t; 194 195 // Isochronous Streams 196 197 // -- Broadcast Isochronous Group BIG 198 199 typedef struct { 200 uint8_t big_handle; 201 uint8_t advertising_handle; 202 uint8_t num_bis; 203 uint32_t sdu_interval_us; 204 uint16_t max_sdu; 205 uint16_t max_transport_latency_ms; 206 uint8_t rtn; 207 uint8_t phy; 208 uint8_t packing; 209 uint8_t framing; 210 uint8_t encryption; 211 uint8_t broadcast_code[16]; 212 } le_audio_big_params_t; 213 214 typedef struct { 215 uint8_t big_handle; 216 uint8_t sync_handle; 217 uint8_t encryption; 218 uint8_t broadcast_code[16]; 219 uint8_t mse; 220 uint16_t big_sync_timeout_10ms; 221 uint8_t num_bis; 222 uint8_t bis_indices[MAX_NR_BIS]; 223 } le_audio_big_sync_params_t; 224 225 typedef enum { 226 LE_AUDIO_BIG_STATE_CREATE, 227 LE_AUDIO_BIG_STATE_W4_ESTABLISHED, 228 LE_AUDIO_BIG_STATE_SETUP_ISO_PATH, 229 LE_AUDIO_BIG_STATE_W4_SETUP_ISO_PATH, 230 LE_AUDIO_BIG_STATE_W4_SETUP_ISO_PATH_THEN_TERMINATE, 231 LE_AUDIO_BIG_STATE_SETUP_ISO_PATHS_FAILED, 232 LE_AUDIO_BIG_STATE_ACTIVE, 233 LE_AUDIO_BIG_STATE_TERMINATE, 234 LE_AUDIO_BIG_STATE_W4_TERMINATED_AFTER_SETUP_FAILED, 235 LE_AUDIO_BIG_STATE_W4_TERMINATED, 236 } le_audio_big_state_t; 237 238 typedef struct { 239 btstack_linked_item_t item; 240 uint8_t big_handle; 241 le_audio_big_state_t state; 242 union { 243 uint8_t next_bis; 244 uint8_t status; 245 } state_vars; 246 uint8_t num_bis; 247 hci_con_handle_t bis_con_handles[MAX_NR_BIS]; 248 const le_audio_big_params_t * params; 249 // request to send 250 bool can_send_now_requested; 251 // previous and current timestamp of number completed event to track ISO intervals 252 bool num_completed_timestamp_previous_valid; 253 bool num_completed_timestamp_current_valid; 254 uint32_t num_completed_timestamp_previous_ms; 255 uint32_t num_completed_timestamp_current_ms; 256 257 } le_audio_big_t; 258 259 typedef struct { 260 btstack_linked_item_t item; 261 uint8_t big_handle; 262 le_audio_big_state_t state; 263 union { 264 uint8_t next_bis; 265 uint8_t status; 266 } state_vars; 267 uint8_t num_bis; 268 hci_con_handle_t bis_con_handles[MAX_NR_BIS]; 269 const le_audio_big_sync_params_t * params; 270 } le_audio_big_sync_t; 271 272 // -- Connected Isochronuous Group CIG 273 274 typedef enum { 275 LE_AUDIO_CIG_STATE_CREATE, 276 LE_AUDIO_CIG_STATE_W4_ESTABLISHED, 277 LE_AUDIO_CIG_STATE_W4_CIS_REQUEST, 278 LE_AUDIO_CIG_STATE_CREATE_CIS, 279 LE_AUDIO_CIG_STATE_W4_CREATE_CIS, 280 LE_AUDIO_CIG_STATE_SETUP_ISO_PATH, 281 LE_AUDIO_CIG_STATE_W4_SETUP_ISO_PATH, 282 LE_AUDIO_CIG_STATE_ACTIVE, 283 LE_AUDIO_CIG_STATE_REMOVE, 284 } le_audio_cig_state_t; 285 286 typedef struct { 287 uint8_t cis_id; 288 uint16_t max_sdu_c_to_p; 289 uint16_t max_sdu_p_to_c; 290 uint8_t phy_c_to_p; 291 uint8_t phy_p_to_c; 292 uint8_t rtn_c_to_p; 293 uint8_t rtn_p_to_c; 294 } le_audio_cis_params_t; 295 296 typedef struct { 297 uint8_t cig_id; 298 uint32_t sdu_interval_c_to_p; 299 uint32_t sdu_interval_p_to_c; 300 uint8_t worst_case_sca; 301 uint8_t packing; 302 uint8_t framing; 303 uint16_t max_transport_latency_c_to_p; 304 uint16_t max_transport_latency_p_to_c; 305 uint8_t num_cis; 306 le_audio_cis_params_t cis_params[MAX_NR_CIS]; 307 } le_audio_cig_params_t; 308 309 typedef struct { 310 btstack_linked_item_t item; 311 uint8_t cig_id; 312 le_audio_cig_params_t * params; 313 le_audio_cig_state_t state; 314 union { 315 uint8_t next_cis; 316 uint8_t status; 317 } state_vars; 318 uint8_t num_cis; 319 hci_con_handle_t cis_con_handles[MAX_NR_CIS]; 320 hci_con_handle_t acl_con_handles[MAX_NR_CIS]; 321 bool cis_setup_active[MAX_NR_CIS]; 322 bool cis_established[MAX_NR_CIS]; 323 // request to send 324 bool can_send_now_requested; 325 } le_audio_cig_t; 326 327 /* API_START */ 328 329 // Classic + LE 330 331 /** 332 * @brief Read RSSI 333 * @param con_handle 334 * @events: GAP_EVENT_RSSI_MEASUREMENT 335 */ 336 int gap_read_rssi(hci_con_handle_t con_handle); 337 338 339 /** 340 * @brief Gets local address. 341 */ 342 void gap_local_bd_addr(bd_addr_t address_buffer); 343 344 /** 345 * @brief Disconnect connection with handle 346 * @param handle 347 */ 348 uint8_t gap_disconnect(hci_con_handle_t handle); 349 350 /** 351 * @brief Get connection type 352 * @param con_handle 353 * @result connection_type 354 */ 355 gap_connection_type_t gap_get_connection_type(hci_con_handle_t connection_handle); 356 357 /** 358 * @brief Get HCI connection role 359 * @param con_handle 360 * @result hci_role_t HCI_ROLE_MASTER / HCI_ROLE_SLAVE / HCI_ROLE_INVALID (if connection does not exist) 361 */ 362 hci_role_t gap_get_role(hci_con_handle_t connection_handle); 363 364 // Classic 365 366 /** 367 * @brief Request role switch 368 * @note this only requests the role switch. A HCI_EVENT_ROLE_CHANGE is emitted and its status field will indicate if the switch was succesful 369 * @param addr 370 * @param hci_role_t HCI_ROLE_MASTER / HCI_ROLE_SLAVE 371 * @result status 372 */ 373 uint8_t gap_request_role(const bd_addr_t addr, hci_role_t role); 374 375 /** 376 * @brief Sets local name. 377 * @note Default name is 'BTstack 00:00:00:00:00:00' 378 * @note '00:00:00:00:00:00' in local_name will be replaced with actual bd addr 379 * @param name is not copied, make sure memory stays valid 380 */ 381 void gap_set_local_name(const char * local_name); 382 383 /** 384 * @brief Set Extended Inquiry Response data 385 * @note If not set, local name will be used for EIR data (see gap_set_local_name) 386 * @note '00:00:00:00:00:00' in local_name will be replaced with actual bd addr 387 * @param eir_data size HCI_EXTENDED_INQUIRY_RESPONSE_DATA_LEN (240) bytes, is not copied make sure memory stays valid 388 */ 389 void gap_set_extended_inquiry_response(const uint8_t * data); 390 391 /** 392 * @brief Set class of device 393 */ 394 void gap_set_class_of_device(uint32_t class_of_device); 395 396 /** 397 * @brief Set default link policy settings for all classic ACL links 398 * @param default_link_policy_settings - see LM_LINK_POLICY_* in bluetooth.h 399 * @note common value: LM_LINK_POLICY_ENABLE_ROLE_SWITCH | LM_LINK_POLICY_ENABLE_SNIFF_MODE to enable role switch and sniff mode 400 */ 401 void gap_set_default_link_policy_settings(uint16_t default_link_policy_settings); 402 403 /** 404 * @brief Set Allow Role Switch param for outgoing classic ACL links 405 * @param allow_role_switch - true: allow remote device to request role switch, false: stay master 406 */ 407 void gap_set_allow_role_switch(bool allow_role_switch); 408 409 /** 410 * @brief Set link supervision timeout for outgoing classic ACL links 411 * @param default_link_supervision_timeout * 0.625 ms, default 0x7d00 = 20 seconds, 0 = no link supervision timeout 412 */ 413 void gap_set_link_supervision_timeout(uint16_t link_supervision_timeout); 414 415 /** 416 * @brief Enable link watchdog. If no ACL packet is sent within timeout_ms, the link will get disconnected 417 * note: current implementation uses the automatic flush timeout controller feature with a max timeout of 1.28s 418 * @param timeout_ms 419 */ 420 void gap_enable_link_watchdog(uint16_t timeout_ms); 421 422 /** 423 * @brief Enable/disable bonding. Default is enabled. 424 * @param enabled 425 */ 426 void gap_set_bondable_mode(int enabled); 427 428 /** 429 * @brief Get bondable mode. 430 * @return 1 if bondable 431 */ 432 int gap_get_bondable_mode(void); 433 434 /** 435 * @brief Set security mode for all outgoing and incoming connections. Default: GAP_SECURITY_MODE_4 436 * @param security_mode is GAP_SECURITY_MODE_2 or GAP_SECURITY_MODE_4 437 * @return status ERROR_CODE_SUCCESS or ERROR_CODE_UNSUPPORTED_FEATURE_OR_PARAMETER_VALUE 438 */ 439 uint8_t gap_set_security_mode(gap_security_mode_t security_mode); 440 441 /** 442 * @brief Get security mode 443 * @return security_mode 444 */ 445 gap_security_mode_t gap_get_security_mode(void); 446 447 /** 448 * @brief Set security level for all outgoing and incoming connections. Default: LEVEL_2 449 * @param security_level 450 * @note has to be called before services or profiles are initialized 451 */ 452 void gap_set_security_level(gap_security_level_t security_level); 453 454 /** 455 * @brief Get security level 456 * @return security_level 457 */ 458 gap_security_level_t gap_get_security_level(void); 459 460 /** 461 * @brief Set Secure Connections Only Mode for BR/EDR (Classic) Default: false 462 * @param enable 463 */ 464 void gap_set_secure_connections_only_mode(bool enable); 465 466 /** 467 * @breif Get Secure Connections Only Mode 468 * @param enabled 469 */ 470 bool gap_get_secure_connections_only_mode(void); 471 472 /** 473 * @brief Set minimal security level for registered services 474 * @param security_level 475 * @note Called by L2CAP based on registered services 476 */ 477 void gap_set_minimal_service_security_level(gap_security_level_t security_level); 478 479 /** 480 * @brief Register filter for rejecting classic connections. Callback will return 1 accept connection, 0 on reject. 481 */ 482 void gap_register_classic_connection_filter(int (*accept_callback)(bd_addr_t addr, hci_link_type_t link_type)); 483 484 /* Configure Secure Simple Pairing */ 485 486 /** 487 * @brief Enable will enable SSP during init. Default: true 488 */ 489 void gap_ssp_set_enable(int enable); 490 491 /** 492 * @brief Set IO Capability. BTstack will return capability to SSP requests 493 */ 494 void gap_ssp_set_io_capability(int ssp_io_capability); 495 496 /** 497 * @brief Set Authentication Requirements using during SSP 498 */ 499 void gap_ssp_set_authentication_requirement(int authentication_requirement); 500 501 /** 502 * @brief Enable/disable Secure Connections. Default: true if supported by Controller 503 */ 504 void gap_secure_connections_enable(bool enable); 505 506 /** 507 * @brief Query if Secure Connections can be used for Classic connections. 508 * @note Requires gap_secure_connections_enable == true and Controller to support it 509 */ 510 bool gap_secure_connections_active(void); 511 512 /** 513 * @brief If set, BTstack will confirm a numeric comparison and enter '000000' if requested. 514 */ 515 void gap_ssp_set_auto_accept(int auto_accept); 516 517 /** 518 * @brief Set required encryption key size for GAP Levels 1-3 on ccassic connections. Default: 16 bytes 519 * @param encryption_key_size in bytes. Valid 7..16 520 */ 521 void gap_set_required_encryption_key_size(uint8_t encryption_key_size); 522 523 /** 524 * @brief Start dedicated bonding with device. Disconnect after bonding. 525 * @param device 526 * @param request MITM protection 527 * @return error, if max num acl connections active 528 * @result GAP_DEDICATED_BONDING_COMPLETE 529 */ 530 int gap_dedicated_bonding(bd_addr_t device, int mitm_protection_required); 531 532 gap_security_level_t gap_security_level_for_link_key_type(link_key_type_t link_key_type); 533 534 /** 535 * @brief map link keys to secure connection yes/no 536 */ 537 bool gap_secure_connection_for_link_key_type(link_key_type_t link_key_type); 538 539 /** 540 * @brief map link keys to authenticated 541 */ 542 bool gap_authenticated_for_link_key_type(link_key_type_t link_key_type); 543 544 gap_security_level_t gap_security_level(hci_con_handle_t con_handle); 545 546 void gap_request_security_level(hci_con_handle_t con_handle, gap_security_level_t level); 547 548 bool gap_mitm_protection_required_for_security_level(gap_security_level_t level); 549 550 /** 551 * @brief Set Page Scan Type 552 * @param page_scan_interval * 0.625 ms, range: 0x0012..0x1000, default: 0x0800 553 * @param page_scan_windows * 0.625 ms, range: 0x0011..page_scan_interval, default: 0x0012 554 */ 555 void gap_set_page_scan_activity(uint16_t page_scan_interval, uint16_t page_scan_window); 556 557 /** 558 * @brief Set Page Scan Type 559 * @param page_scan_mode 560 */ 561 void gap_set_page_scan_type(page_scan_type_t page_scan_type); 562 563 /** 564 * @brief Set Page Timeout 565 * @param page_timeout * 0.625 ms, range: 0x0001..0xffff, default: 0x6000 (ca 15 seconds) 566 */ 567 void gap_set_page_timeout(uint16_t page_timeout); 568 569 // LE 570 571 /** 572 * @brief Set parameters for LE Scan 573 * @param scan_type 0 = passive, 1 = active 574 * @param scan_interval range 0x0004..0x4000, unit 0.625 ms 575 * @param scan_window range 0x0004..0x4000, unit 0.625 ms 576 * @param scanning_filter_policy 0 = all devices, 1 = all from whitelist 577 */ 578 void gap_set_scan_params(uint8_t scan_type, uint16_t scan_interval, uint16_t scan_window, uint8_t scanning_filter_policy); 579 580 /** 581 * @brief Set parameters for LE Scan 582 * @deprecated Use gap_set_scan_params instead 583 */ 584 void gap_set_scan_parameters(uint8_t scan_type, uint16_t scan_interval, uint16_t scan_window); 585 586 /** 587 * @brief Set duplicate filter for LE Scan 588 * @param enabled if enabled, only one advertisements per BD_ADDR is reported, default: false 589 */ 590 void gap_set_scan_duplicate_filter(bool enabled); 591 592 /** 593 * @brief Set PHYs for LE Scan 594 * @param phy bitmask: 1 = LE 1M PHY, 4 = LE Coded PHY 595 */ 596 void gap_set_scan_phys(uint8_t phys); 597 598 /** 599 * @brief Start LE Scan 600 */ 601 void gap_start_scan(void); 602 603 /** 604 * @brief Stop LE Scan 605 */ 606 void gap_stop_scan(void); 607 608 /** 609 * @brief Enable privacy by using random addresses 610 * @param random_address_type to use (incl. OFF) 611 */ 612 void gap_random_address_set_mode(gap_random_address_type_t random_address_type); 613 614 /** 615 * @brief Get privacy mode 616 */ 617 gap_random_address_type_t gap_random_address_get_mode(void); 618 619 /** 620 * @brief Sets update period for random address 621 * @param period_ms in ms 622 */ 623 void gap_random_address_set_update_period(int period_ms); 624 625 /** 626 * @brief Sets a fixed random address for advertising 627 * @param addr 628 * @note Sets random address mode to type static 629 */ 630 void gap_random_address_set(const bd_addr_t addr); 631 632 /** 633 * @brief Set Advertisement Data 634 * @param advertising_data_length 635 * @param advertising_data (max 31 octets) 636 * @note data is not copied, pointer has to stay valid 637 * @note '00:00:00:00:00:00' in advertising_data will be replaced with actual bd addr 638 */ 639 void gap_advertisements_set_data(uint8_t advertising_data_length, uint8_t * advertising_data); 640 641 /** 642 * @brief Set Advertisement Parameters 643 * @param adv_int_min 644 * @param adv_int_max 645 * @param adv_type 646 * @param direct_address_type 647 * @param direct_address 648 * @param channel_map 649 * @param filter_policy 650 * @note own_address_type is used from gap_random_address_set_mode 651 */ 652 void gap_advertisements_set_params(uint16_t adv_int_min, uint16_t adv_int_max, uint8_t adv_type, 653 uint8_t direct_address_typ, bd_addr_t direct_address, uint8_t channel_map, uint8_t filter_policy); 654 655 /** 656 * @brief Enable/Disable Advertisements. OFF by default. 657 * @param enabled 658 */ 659 void gap_advertisements_enable(int enabled); 660 661 /** 662 * @brief Set Scan Response Data 663 * 664 * @note For scan response data, scannable undirected advertising (ADV_SCAN_IND) need to be used 665 * 666 * @param advertising_data_length 667 * @param advertising_data (max 31 octets) 668 * @note data is not copied, pointer has to stay valid 669 * @note '00:00:00:00:00:00' in scan_response_data will be replaced with actual bd addr 670 */ 671 void gap_scan_response_set_data(uint8_t scan_response_data_length, uint8_t * scan_response_data); 672 673 /** 674 * @brief Provide storage for new advertising set and setup on Controller 675 * @param storage to use by stack, needs to stay valid until adv set is removed with gap_extended_advertising_remove 676 * @param advertising_parameters 677 * @param out_advertising_handle to use with other adv config commands 678 * @return status 679 * @events: GAP_SUBEVENT_ADVERTISING_SET_INSTALLED 680 */ 681 uint8_t gap_extended_advertising_setup(le_advertising_set_t * storage, const le_extended_advertising_parameters_t * advertising_parameters, uint8_t * out_advertising_handle); 682 683 /** 684 * @param Set advertising params for advertising set 685 * @param advertising_handle 686 * @param advertising_parameters 687 * @return status 688 */ 689 uint8_t gap_extended_advertising_set_params(uint8_t advertising_handle, const le_extended_advertising_parameters_t * advertising_parameters); 690 691 /** 692 * @param Get advertising params for advertising set, e.g. to update params 693 * @param advertising_handle 694 * @param advertising_parameters 695 * @return status 696 */ 697 uint8_t gap_extended_advertising_get_params(uint8_t advertising_handle, le_extended_advertising_parameters_t * advertising_parameters); 698 699 /** 700 * @param Set periodic advertising params for advertising set 701 * @param advertising_handle 702 * @param advertising_parameters 703 * @return status 704 */ 705 uint8_t gap_periodic_advertising_set_params(uint8_t advertising_handle, const le_periodic_advertising_parameters_t * advertising_parameters); 706 707 /** 708 * @param Get params for periodic advertising set, e.g. to update params 709 * @param advertising_handle 710 * @param advertising_parameters 711 * @return status 712 */ 713 uint8_t gap_periodic_advertising_get_params(uint8_t advertising_handle, le_periodic_advertising_parameters_t * advertising_parameters); 714 715 /** 716 * @param Set random addrress for advertising set 717 * @param advertising_handle 718 * @param random_address 719 * @return status 720 */ 721 uint8_t gap_extended_advertising_set_random_address(uint8_t advertising_handle, bd_addr_t random_address); 722 723 /** 724 * @brief Set Advertising Data for a advertisement set 725 * @param advertising_handle 726 * @param advertising_data_length 727 * @param advertising_data 728 * @return status 729 */ 730 uint8_t gap_extended_advertising_set_adv_data(uint8_t advertising_handle, uint16_t advertising_data_length, const uint8_t * advertising_data); 731 732 /** 733 * @brief Set Scan Response Data for a advertisement set 734 * @param advertising_handle 735 * @param scan_response_data_length 736 * @param scan_response_data 737 * @return status 738 */ 739 uint8_t gap_extended_advertising_set_scan_response_data(uint8_t advertising_handle, uint16_t scan_response_data_length, const uint8_t * scan_response_data); 740 741 /** 742 * @brief Set data for periodic advertisement set 743 * @param advertising_handle 744 * @param periodic_data_length 745 * @param periodic_data 746 * @return status 747 */ 748 uint8_t gap_periodic_advertising_set_data(uint8_t advertising_handle, uint16_t periodic_data_length, const uint8_t * periodic_data); 749 750 /** 751 * @brief Start advertising advertising set 752 * @param advertising_handle 753 * @param timeout in 10ms, or 0 == no timeout 754 * @param num_extended_advertising_events Controller shall send, or 0 == no max number 755 * @return status 756 */ 757 uint8_t gap_extended_advertising_start(uint8_t advertising_handle, uint16_t timeout, uint8_t num_extended_advertising_events); 758 759 /** 760 * @brief Stop advertising 761 * @param advertising_handle 762 * @return status 763 */ 764 uint8_t gap_extended_advertising_stop(uint8_t advertising_handle); 765 766 /** 767 * @brief Start periodic advertising for given advertising set 768 * @param advertising_handle 769 * @param include_adi 770 * @return status 771 */ 772 uint8_t gap_periodic_advertising_start(uint8_t advertising_handle, bool include_adi); 773 774 /** 775 * @brief Stop periodic advertising for given advertising set 776 * @param advertising_handle 777 * @return status 778 */ 779 uint8_t gap_periodic_advertising_stop(uint8_t advertising_handle); 780 781 /** 782 * @brief Set Default Periodic Advertising Sync Transfer Parameters 783 * @note The parameters are used for all subsequent connections over the LE transport. 784 * If mode != 0, an HCI_LE_Periodic_Advertising_Sync_Transfer_Received event will be emitted by the Controller 785 * @param mode 0 = ignore (default), 1 = periodic advertising events disabled 786 * 2 = periodic advertising events enabled with duplicate filtering 787 * 3 = periodic advertising events enabled with duplicate filtering 788 * @return status 789 * @param skip The number of periodic advertising packets that can be skipped after a successful receive 790 * @param sync_timeout Range: 0x000A to 0x4000, Time = N*10 ms, Time Range: 100 ms to 163.84 s 791 * @param cte_type bit 0 = Do not sync to packets with an AoA Constant Tone Extension 792 * bit 1 = Do not sync to packets with an AoD Constant Tone Extension with 1 μs slots 793 * bit 2 = Do not sync to packets with an AoD Constant Tone Extension with 2 μs slots 794 * bit 3 = Do not sync to packets without a Constant Tone Extension 795 */ 796 uint8_t gap_periodic_advertising_sync_transfer_set_default_parameters(uint8_t mode, uint16_t skip, uint16_t sync_timeout, uint8_t cte_type); 797 798 /** 799 * @brief Send Periodic Advertising Sync Transfer to connected device 800 * @param con_handle of connected device 801 * @param service_data 16-bit data to trasnfer to remote host 802 * @param sync_handle of periodic advertising train to transfer 803 * @return 804 */ 805 uint8_t gap_periodic_advertising_sync_transfer_send(hci_con_handle_t con_handle, uint16_t service_data, hci_con_handle_t sync_handle); 806 807 /** 808 * @brief Remove advertising set from Controller 809 * @param advertising_handle 810 * @return status 811 * @events GAP_SUBEVENT_ADVERTISING_SET_REMOVED 812 */ 813 uint8_t gap_extended_advertising_remove(uint8_t advertising_handle); 814 815 /** 816 * @brief Create Broadcast Isochronous Group (BIG) 817 * @param storage to use by stack, needs to stay valid until adv set is removed with gap_big_terminate 818 * @param big_params 819 * @return status 820 * @events GAP_SUBEVENT_BIG_CREATED unless interrupted by call to gap_big_terminate 821 */ 822 uint8_t gap_big_create(le_audio_big_t * storage, le_audio_big_params_t * big_params); 823 824 /** 825 * @brief Terminate Broadcast Isochronous Group (BIG) 826 * @param big_handle 827 * @return status 828 * @events: GAP_SUBEVENT_BIG_TERMINATED 829 */ 830 uint8_t gap_big_terminate(uint8_t big_handle); 831 832 /** 833 * @brief Synchronize to Broadcast Isochronous Group (BIG) 834 * @param storage to use by stack, needs to stay valid until adv set is removed with gap_big_terminate 835 * @param big_sync_params 836 * @return status 837 * @events GAP_SUBEVENT_BIG_SYNC_CREATED unless interrupted by call to gap_big_sync_terminate 838 */ 839 uint8_t gap_big_sync_create(le_audio_big_sync_t * storage, le_audio_big_sync_params_t * big_sync_params); 840 841 /** 842 * @brief Stop synchronizing to Broadcast Isochronous Group (BIG). Triggers GAP_SUBEVENT_BIG_SYNC_STOPPED 843 * @note Also used to stop synchronizing before BIG Sync was established 844 * @param big_handle 845 * @return status 846 * @events GAP_SUBEVENT_BIG_SYNC_STOPPED 847 */ 848 uint8_t gap_big_sync_terminate(uint8_t big_handle); 849 850 /** 851 * @brief Create Connected Isochronous Group (CIG) 852 * @param storage to use by stack, needs to stay valid until CIG removed with gap_cig_remove 853 * @param cig_params 854 * @return status 855 * @events GAP_SUBEVENT_CIG_CREATED unless interrupted by call to gap_cig_remove 856 */ 857 uint8_t gap_cig_create(le_audio_cig_t * storage, le_audio_cig_params_t * cig_params); 858 859 /** 860 * @brief Remove Connected Isochronous Group (CIG) 861 * @param cig_handle 862 * @return status 863 * @events GAP_SUBEVENT_CIG_TERMINATED 864 */ 865 uint8_t gap_cig_remove(uint8_t cig_handle); 866 867 /** 868 * @brief Create Connected Isochronous Streams (CIS) 869 * @note number of CIS from cig_params in gap_cig_create is used 870 * @param cig_handle 871 * @param cis_con_handles array of CIS Connection Handles 872 * @param acl_con_handles array of ACL Connection Handles 873 * @return status 874 * @events GAP_SUBEVENT_CIS_CREATED unless interrupted by call to gap_cig_remove 875 */ 876 uint8_t gap_cis_create(uint8_t cig_handle, hci_con_handle_t cis_con_handles [], hci_con_handle_t acl_con_handles []); 877 878 /** 879 * @brief Accept Connected Isochronous Stream (CIS) 880 * @param cis_con_handle 881 * @return status 882 * @events GAP_SUBEVENT_CIS_CREATED 883 */ 884 uint8_t gap_cis_accept(hci_con_handle_t cis_con_handle); 885 886 /** 887 * @brief Reject Connected Isochronous Stream (CIS) 888 * @param cis_con_handle 889 * @return status 890 * @events GAP_SUBEVENT_CIS_CREATED 891 */ 892 uint8_t gap_cis_reject(hci_con_handle_t cis_con_handle); 893 894 /** 895 * @brief Set connection parameters for outgoing connections 896 * @param conn_scan_interval (unit: 0.625 msec), default: 60 ms 897 * @param conn_scan_window (unit: 0.625 msec), default: 30 ms 898 * @param conn_interval_min (unit: 1.25ms), default: 10 ms 899 * @param conn_interval_max (unit: 1.25ms), default: 30 ms 900 * @param conn_latency, default: 4 901 * @param supervision_timeout (unit: 10ms), default: 720 ms 902 * @param min_ce_length (unit: 0.625ms), default: 10 ms 903 * @param max_ce_length (unit: 0.625ms), default: 30 ms 904 */ 905 void gap_set_connection_parameters(uint16_t conn_scan_interval, uint16_t conn_scan_window, 906 uint16_t conn_interval_min, uint16_t conn_interval_max, uint16_t conn_latency, 907 uint16_t supervision_timeout, uint16_t min_ce_length, uint16_t max_ce_length); 908 909 /** 910 * @brief Set initiating PHYs for outgoing connections 911 * @param phy bitmask: 1 = LE 1M PHY, 2 = LE 2M PHY, 4 = LE Coded PHY 912 */ 913 void gap_set_connection_phys(uint8_t phys); 914 915 /** 916 * @brief Request an update of the connection parameter for a given LE connection 917 * @param handle 918 * @param conn_interval_min (unit: 1.25ms) 919 * @param conn_interval_max (unit: 1.25ms) 920 * @param conn_latency 921 * @param supervision_timeout (unit: 10ms) 922 * @return 0 if ok 923 */ 924 int gap_request_connection_parameter_update(hci_con_handle_t con_handle, uint16_t conn_interval_min, 925 uint16_t conn_interval_max, uint16_t conn_latency, uint16_t supervision_timeout); 926 927 /** 928 * @brief Updates the connection parameters for a given LE connection 929 * @param handle 930 * @param conn_interval_min (unit: 1.25ms) 931 * @param conn_interval_max (unit: 1.25ms) 932 * @param conn_latency 933 * @param supervision_timeout (unit: 10ms) 934 * @return 0 if ok 935 */ 936 int gap_update_connection_parameters(hci_con_handle_t con_handle, uint16_t conn_interval_min, 937 uint16_t conn_interval_max, uint16_t conn_latency, uint16_t supervision_timeout); 938 939 /** 940 * @brief Set accepted connection parameter range 941 * @param range 942 */ 943 void gap_get_connection_parameter_range(le_connection_parameter_range_t * range); 944 945 /** 946 * @brief Get accepted connection parameter range 947 * @param range 948 */ 949 void gap_set_connection_parameter_range(le_connection_parameter_range_t * range); 950 951 /** 952 * @brief Test if connection parameters are inside in existing rage 953 * @param conn_interval_min (unit: 1.25ms) 954 * @param conn_interval_max (unit: 1.25ms) 955 * @param conn_latency 956 * @param supervision_timeout (unit: 10ms) 957 * @return 1 if included 958 */ 959 int gap_connection_parameter_range_included(le_connection_parameter_range_t * existing_range, uint16_t le_conn_interval_min, uint16_t le_conn_interval_max, uint16_t le_conn_latency, uint16_t le_supervision_timeout); 960 961 /** 962 * @brief Set max number of connections in LE Peripheral role (if Bluetooth Controller supports it) 963 * @note: default: 1 964 * @param max_peripheral_connections 965 */ 966 void gap_set_max_number_peripheral_connections(int max_peripheral_connections); 967 968 /** 969 * @brief Add Device to Whitelist 970 * @param address_typ 971 * @param address 972 * @return 0 if ok 973 */ 974 uint8_t gap_whitelist_add(bd_addr_type_t address_type, const bd_addr_t address); 975 976 /** 977 * @brief Remove Device from Whitelist 978 * @param address_typ 979 * @param address 980 * @return 0 if ok 981 */ 982 uint8_t gap_whitelist_remove(bd_addr_type_t address_type, const bd_addr_t address); 983 984 /** 985 * @brief Clear Whitelist 986 * @return 0 if ok 987 */ 988 uint8_t gap_whitelist_clear(void); 989 990 /** 991 * @brief Connect to remote LE device 992 */ 993 uint8_t gap_connect(const bd_addr_t addr, bd_addr_type_t addr_type); 994 995 /** 996 * @brief Connect with Whitelist 997 * @note Explicit whitelist management and this connect with whitelist replace deprecated gap_auto_connection_* functions 998 * @return - if ok 999 */ 1000 uint8_t gap_connect_with_whitelist(void); 1001 1002 /** 1003 * @brief Cancel connection process initiated by gap_connect 1004 */ 1005 uint8_t gap_connect_cancel(void); 1006 1007 /** 1008 * @brief Auto Connection Establishment - Start Connecting to device 1009 * @deprecated Please setup Whitelist with gap_whitelist_* and start connecting with gap_connect_with_whitelist 1010 * @param address_type 1011 * @param address 1012 * @return 0 if ok 1013 */ 1014 uint8_t gap_auto_connection_start(bd_addr_type_t address_type, const bd_addr_t address); 1015 1016 /** 1017 * @brief Auto Connection Establishment - Stop Connecting to device 1018 * @deprecated Please setup Whitelist with gap_whitelist_* and start connecting with gap_connect_with_whitelist 1019 * @param address_type 1020 * @param address 1021 * @return 0 if ok 1022 */ 1023 uint8_t gap_auto_connection_stop(bd_addr_type_t address_type, const bd_addr_t address); 1024 1025 /** 1026 * @brief Auto Connection Establishment - Stop everything 1027 * @deprecated Please setup Whitelist with gap_whitelist_* and start connecting with gap_connect_with_whitelist 1028 * @note Convenience function to stop all active auto connection attempts 1029 */ 1030 uint8_t gap_auto_connection_stop_all(void); 1031 1032 /** 1033 * @brief Set LE PHY 1034 * @param con_handle 1035 * @param all_phys 0 = set rx/tx, 1 = set only rx, 2 = set only tx 1036 * @param tx_phys 1 = 1M, 2 = 2M, 4 = Coded 1037 * @param rx_phys 1 = 1M, 2 = 2M, 4 = Coded 1038 * @param phy_options 0 = no preferred coding for Coded, 1 = S=2 coding (500 kbit), 2 = S=8 coding (125 kbit) 1039 * @return 0 if ok 1040 */ 1041 uint8_t gap_le_set_phy(hci_con_handle_t con_handle, uint8_t all_phys, uint8_t tx_phys, uint8_t rx_phys, uint8_t phy_options); 1042 1043 /** 1044 * @brief Get connection interval 1045 * @param con_handle 1046 * @return connection interval, otherwise 0 if error 1047 */ 1048 uint16_t gap_le_connection_interval(hci_con_handle_t con_handle); 1049 1050 /** 1051 * 1052 * @brief Get encryption key size. 1053 * @param con_handle 1054 * @return 0 if not encrypted, 7-16 otherwise 1055 */ 1056 uint8_t gap_encryption_key_size(hci_con_handle_t con_handle); 1057 1058 /** 1059 * @brief Get authentication property. 1060 * @param con_handle 1061 * @return 1 if bonded with OOB/Passkey (AND MITM protection) 1062 */ 1063 bool gap_authenticated(hci_con_handle_t con_handle); 1064 1065 /** 1066 * @brief Get secure connection property 1067 * @param con_handle 1068 * @return 1 if bonded usiung LE Secure Connections 1069 */ 1070 bool gap_secure_connection(hci_con_handle_t con_handle); 1071 1072 /** 1073 * @brief Queries authorization state. 1074 * @param con_handle 1075 * @return authorization_state for the current session 1076 */ 1077 authorization_state_t gap_authorization_state(hci_con_handle_t con_handle); 1078 1079 /** 1080 * @brief Get bonded property (BR/EDR/LE) 1081 * @note LE: has to be called after identity resolving is complete 1082 * @param con_handle 1083 * @return true if bonded 1084 */ 1085 bool gap_bonded(hci_con_handle_t con_handle); 1086 1087 // Classic 1088 #ifdef ENABLE_CLASSIC 1089 1090 /** 1091 * @brief Override page scan mode. Page scan mode enabled by l2cap when services are registered 1092 * @note Might be used to reduce power consumption while Bluetooth module stays powered but no (new) 1093 * connections are expected 1094 */ 1095 void gap_connectable_control(uint8_t enable); 1096 1097 /** 1098 * @brief Allows to control if device is discoverable. OFF by default. 1099 */ 1100 void gap_discoverable_control(uint8_t enable); 1101 1102 /** 1103 * @brief Deletes link key for remote device with baseband address. 1104 * @param addr 1105 * @note On most desktop ports, the Link Key DB uses a TLV and there is one TLV storage per 1106 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1107 * power up, this function only works, when the stack is in working state for these ports. 1108 */ 1109 void gap_drop_link_key_for_bd_addr(bd_addr_t addr); 1110 1111 /** 1112 * @brief Delete all stored link keys 1113 * @note On most desktop ports, the Link Key DB uses a TLV and there is one TLV storage per 1114 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1115 * power up, this function only works, when the stack is in working state for these ports. 1116 */ 1117 void gap_delete_all_link_keys(void); 1118 1119 /** 1120 * @brief Store link key for remote device with baseband address 1121 * @param addr 1122 * @param link_key 1123 * @param link_key_type 1124 * @note On most desktop ports, the Link Key DB uses a TLV and there is one TLV storage per 1125 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1126 * power up, this function only works, when the stack is in working state for these ports. 1127 */ 1128 void gap_store_link_key_for_bd_addr(bd_addr_t addr, link_key_t link_key, link_key_type_t type); 1129 1130 /** 1131 * @brief Get link for remote device with basband address 1132 * @param addr 1133 * @param link_key (out) is stored here 1134 * @param link_key_type (out) is stored here 1135 * @note On most desktop ports, the Link Key DB uses a TLV and there is one TLV storage per 1136 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1137 * power up, this function only works, when the stack is in working state for these ports. 1138 */ 1139 bool gap_get_link_key_for_bd_addr(bd_addr_t addr, link_key_t link_key, link_key_type_t * type); 1140 1141 /** 1142 * @brief Setup Link Key iterator 1143 * @param it 1144 * @return 1 on success 1145 * @note On most desktop ports, the Link Key DB uses a TLV and there is one TLV storage per 1146 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1147 * power up, this function only works, when the stack is in working state for these ports. 1148 */ 1149 int gap_link_key_iterator_init(btstack_link_key_iterator_t * it); 1150 1151 /** 1152 * @brief Get next Link Key 1153 * @param it 1154 * @brief addr 1155 * @brief link_key 1156 * @brief type of link key 1157 * @return 1, if valid link key found 1158 * @see note on gap_link_key_iterator_init 1159 */ 1160 int gap_link_key_iterator_get_next(btstack_link_key_iterator_t * it, bd_addr_t bd_addr, link_key_t link_key, link_key_type_t * type); 1161 1162 /** 1163 * @brief Frees resources allocated by iterator_init 1164 * @note Must be called after iteration to free resources 1165 * @param it 1166 * @see note on gap_link_key_iterator_init 1167 */ 1168 void gap_link_key_iterator_done(btstack_link_key_iterator_t * it); 1169 1170 /** 1171 * @brief Start GAP Classic Inquiry 1172 * @param duration in 1.28s units 1173 * @return 0 if ok 1174 * @events: GAP_EVENT_INQUIRY_RESULT, GAP_EVENT_INQUIRY_COMPLETE 1175 */ 1176 int gap_inquiry_start(uint8_t duration_in_1280ms_units); 1177 1178 /** 1179 * @brief Start GAP Classic Periodic Inquiry 1180 * @param duration in 1.28s units 1181 * @param max_period_length between consecutive inquiries in 1.28s units 1182 * @param min_period_length between consecutive inquiries in 1.28s units 1183 * @return 0 if ok 1184 * @events: GAP_EVENT_INQUIRY_RESULT, GAP_EVENT_INQUIRY_COMPLETE 1185 */ 1186 uint8_t gap_inquiry_periodic_start(uint8_t duration, uint16_t max_period_length, uint16_t min_period_length); 1187 1188 /** 1189 * @brief Stop GAP Classic Inquiry (regular or periodic) 1190 * @return 0 if ok 1191 * @events: GAP_EVENT_INQUIRY_COMPLETE 1192 */ 1193 int gap_inquiry_stop(void); 1194 1195 /** 1196 * @brief Set LAP for GAP Classic Inquiry 1197 * @param lap GAP_IAC_GENERAL_INQUIRY (default), GAP_IAC_LIMITED_INQUIRY 1198 */ 1199 void gap_inquiry_set_lap(uint32_t lap); 1200 1201 /** 1202 * @brief Set Inquiry Scan Activity 1203 * @param inquiry_scan_interval range: 0x0012 to 0x1000; only even values are valid, Time = N * 0.625 ms 1204 * @param inquiry_scan_window range: 0x0011 to 0x1000; Time = N * 0.625 ms 1205 */ 1206 void gap_inquiry_set_scan_activity(uint16_t inquiry_scan_interval, uint16_t inquiry_scan_window); 1207 1208 /** 1209 * @brief Remote Name Request 1210 * @param addr 1211 * @param page_scan_repetition_mode 1212 * @param clock_offset only used when bit 15 is set - pass 0 if not known 1213 * @events: HCI_EVENT_REMOTE_NAME_REQUEST_COMPLETE 1214 */ 1215 int gap_remote_name_request(const bd_addr_t addr, uint8_t page_scan_repetition_mode, uint16_t clock_offset); 1216 1217 /** 1218 * @brief Legacy Pairing Pin Code Response 1219 * @note data is not copied, pointer has to stay valid 1220 * @param addr 1221 * @param pin 1222 * @return 0 if ok 1223 */ 1224 int gap_pin_code_response(const bd_addr_t addr, const char * pin); 1225 1226 /** 1227 * @brief Legacy Pairing Pin Code Response for binary data / non-strings 1228 * @note data is not copied, pointer has to stay valid 1229 * @param addr 1230 * @param pin_data 1231 * @param pin_len 1232 * @return 0 if ok 1233 */ 1234 int gap_pin_code_response_binary(const bd_addr_t addr, const uint8_t * pin_data, uint8_t pin_len); 1235 1236 /** 1237 * @brief Abort Legacy Pairing 1238 * @param addr 1239 * @param pin 1240 * @return 0 if ok 1241 */ 1242 int gap_pin_code_negative(bd_addr_t addr); 1243 1244 /** 1245 * @brief SSP Passkey Response 1246 * @param addr 1247 * @param passkey [0..999999] 1248 * @return 0 if ok 1249 */ 1250 int gap_ssp_passkey_response(const bd_addr_t addr, uint32_t passkey); 1251 1252 /** 1253 * @brief Abort SSP Passkey Entry/Pairing 1254 * @param addr 1255 * @param pin 1256 * @return 0 if ok 1257 */ 1258 int gap_ssp_passkey_negative(const bd_addr_t addr); 1259 1260 /** 1261 * @brief Accept SSP Numeric Comparison 1262 * @param addr 1263 * @param passkey 1264 * @return 0 if ok 1265 */ 1266 int gap_ssp_confirmation_response(const bd_addr_t addr); 1267 1268 /** 1269 * @brief Abort SSP Numeric Comparison/Pairing 1270 * @param addr 1271 * @param pin 1272 * @return 0 if ok 1273 */ 1274 int gap_ssp_confirmation_negative(const bd_addr_t addr); 1275 1276 /** 1277 * @brief Generate new OOB data 1278 * @note OOB data will be provided in GAP_EVENT_LOCAL_OOB_DATA and be used in future pairing procedures 1279 */ 1280 void gap_ssp_generate_oob_data(void); 1281 1282 /** 1283 * @brief Report Remote OOB Data 1284 * @note Pairing Hash and Randomizer are expected in big-endian byte format 1285 * @param bd_addr 1286 * @param c_192 Simple Pairing Hash C derived from P-192 public key 1287 * @param r_192 Simple Pairing Randomizer derived from P-192 public key 1288 * @param c_256 Simple Pairing Hash C derived from P-256 public key 1289 * @param r_256 Simple Pairing Randomizer derived from P-256 public key 1290 */ 1291 uint8_t gap_ssp_remote_oob_data(const bd_addr_t addr, const uint8_t * c_192, const uint8_t * r_192, const uint8_t * c_256, const uint8_t * r_256); 1292 1293 /** 1294 * Send SSP IO Capabilities Reply 1295 * @note IO Capabilities (Negative) Reply is sent automatically unless ENABLE_EXPLICIT_IO_CAPABILITIES_REPLY 1296 * @param addr 1297 * @return 0 if ok 1298 */ 1299 uint8_t gap_ssp_io_capabilities_response(const bd_addr_t addr); 1300 1301 /** 1302 * Send SSP IO Capabilities Negative Reply 1303 * @note IO Capabilities (Negative) Reply is sent automatically unless ENABLE_EXPLICIT_IO_CAPABILITIES_REPLY 1304 * @param addr 1305 * @return 0 if ok 1306 */ 1307 uint8_t gap_ssp_io_capabilities_negative(const bd_addr_t addr); 1308 1309 /** 1310 * Send Link Key Reponse 1311 * @note Link Key (Negative) Reply is sent automatically unless ENABLE_EXPLICIT_LINK_KEY_RESPONSE 1312 * @param addr 1313 * @param link_key 1314 * @param type or INVALID_LINK_KEY if link key not available 1315 * @return 0 if ok 1316 */ 1317 uint8_t gap_send_link_key_response(const bd_addr_t addr, link_key_t link_key, link_key_type_t type); 1318 1319 /** 1320 * @brief Enter Sniff mode 1321 * @param con_handle 1322 * @param sniff_min_interval range: 0x0002 to 0xFFFE; only even values are valid, Time = N * 0.625 ms 1323 * @param sniff_max_interval range: 0x0002 to 0xFFFE; only even values are valid, Time = N * 0.625 ms 1324 * @param sniff_attempt Number of Baseband receive slots for sniff attempt. 1325 * @param sniff_timeout Number of Baseband receive slots for sniff timeout. 1326 @ @return 0 if ok 1327 */ 1328 uint8_t gap_sniff_mode_enter(hci_con_handle_t con_handle, uint16_t sniff_min_interval, uint16_t sniff_max_interval, uint16_t sniff_attempt, uint16_t sniff_timeout); 1329 1330 /** 1331 * @brief Exit Sniff mode 1332 * @param con_handle 1333 @ @return 0 if ok 1334 */ 1335 uint8_t gap_sniff_mode_exit(hci_con_handle_t con_handle); 1336 1337 /** 1338 * @brief Configure Sniff Subrating 1339 * @param con_handle 1340 * @param max_latency range: 0x0002 to 0xFFFE; Time = N * 0.625 ms 1341 * @param min_remote_timeout range: 0x0002 to 0xFFFE; Time = N * 0.625 ms 1342 * @param min_local_timeout range: 0x0002 to 0xFFFE; Time = N * 0.625 ms 1343 @ @return 0 if ok 1344 */ 1345 uint8_t gap_sniff_subrating_configure(hci_con_handle_t con_handle, uint16_t max_latency, uint16_t min_remote_timeout, uint16_t min_local_timeout); 1346 1347 /** 1348 * @Brief Set QoS 1349 * @param con_handle 1350 * @param service_type 1351 * @param token_rate 1352 * @param peak_bandwidth 1353 * @param latency 1354 * @param delay_variation 1355 @ @return 0 if ok 1356 */ 1357 uint8_t gap_qos_set(hci_con_handle_t con_handle, hci_service_type_t service_type, uint32_t token_rate, uint32_t peak_bandwidth, uint32_t latency, uint32_t delay_variation); 1358 1359 #endif 1360 1361 // LE 1362 1363 /** 1364 * @brief Get own addr type and address used for LE for next scan/advertisement/connect operation 1365 */ 1366 void gap_le_get_own_address(uint8_t * addr_type, bd_addr_t addr); 1367 1368 /** 1369 * @brief Get own addr type and address used for LE advertisements (Peripheral) 1370 */ 1371 void gap_le_get_own_advertisements_address(uint8_t * addr_type, bd_addr_t addr); 1372 1373 /** 1374 * @brief Get own addr type and address used for LE connections (Central) 1375 */ 1376 void gap_le_get_own_connection_address(uint8_t * addr_type, bd_addr_t addr); 1377 1378 /** 1379 * @brief Get state of connection re-encryption for bonded devices when in central role 1380 * @note used by gatt_client and att_server to wait for re-encryption 1381 * @param con_handle 1382 * @return 1 if security setup is active 1383 */ 1384 int gap_reconnect_security_setup_active(hci_con_handle_t con_handle); 1385 1386 /** 1387 * @brief Delete bonding information for remote device 1388 * @note On most desktop ports, the LE Device DB uses a TLV and there is one TLV storage per 1389 * Controller resp. its Bluetooth Address. As the Bluetooth Address is retrieved during 1390 * power up, this function only works, when the stack is in working state for these ports. 1391 * @param address_type 1392 * @param address 1393 */ 1394 void gap_delete_bonding(bd_addr_type_t address_type, bd_addr_t address); 1395 1396 /** 1397 * LE Privacy 1.2 - requires support by Controller and ENABLE_LE_RESOLVING_LIST to be defined 1398 */ 1399 1400 /** 1401 * Set Privacy Mode for use in Resolving List. Default: LE_PRIVACY_MODE_DEVICE 1402 * @note Only applies for new devices added to resolving list, please call before startup 1403 * @param privacy_mode 1404 */ 1405 void gap_set_peer_privacy_mode(le_privacy_mode_t privacy_mode ); 1406 1407 /** 1408 * @brief Load LE Device DB entries into Controller Resolving List to allow filtering on 1409 * bonded devies with resolvable private addresses 1410 * @return EROOR_CODE_SUCCESS if supported by Controller 1411 */ 1412 uint8_t gap_load_resolving_list_from_le_device_db(void); 1413 1414 /** 1415 * @brief Get local persistent IRK 1416 */ 1417 const uint8_t * gap_get_persistent_irk(void); 1418 1419 /* API_END*/ 1420 1421 #if defined __cplusplus 1422 } 1423 #endif 1424 1425 #endif // GAP_H 1426