1 /* 2 * Copyright (C) 2019 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 /** 39 * OBEX Message Builder 40 * 41 */ 42 43 #ifndef OBEX_MESSAGE_BUILDER_H 44 #define OBEX_MESSAGE_BUILDER_H 45 46 #if defined __cplusplus 47 extern "C" { 48 #endif 49 50 #include <stdint.h> 51 #include <string.h> 52 53 #include "btstack_defines.h" 54 55 //------------------------------------------------------------------------------------------------------------ 56 // obex_message_builder.h 57 // 58 // Functions to incrementaly construct an OBEX message. The current length of the message is stored at 59 // offset 1 in the buffer. All functions return status code ERROR_CODE_MEMORY_CAPACITY_EXCEEDED id the 60 // buffer is too small. 61 62 /* API_START */ 63 64 /** 65 * @brief Start Connect request 66 * @param buffer 67 * @param buffer_len 68 * @param obex_version_number 69 * @param flags 70 * @param maximum_obex_packet_length 71 * @return status 72 */ 73 uint8_t obex_message_builder_request_create_connect(uint8_t * buffer, uint16_t buffer_len, uint8_t obex_version_number, uint8_t flags, uint16_t maximum_obex_packet_length); 74 75 /** 76 * @brief Start Disconnect request 77 * @param buffer 78 * @param buffer_len 79 * @param connection_id 80 * @return status 81 */ 82 uint8_t obex_message_builder_request_create_disconnect(uint8_t * buffer, uint16_t buffer_len, uint32_t connection_id); 83 84 /** 85 * @brief Create Get request 86 * @param buffer 87 * @param buffer_len 88 * @param connection_id 89 * @return status 90 */ 91 uint8_t obex_message_builder_request_create_get(uint8_t * buffer, uint16_t buffer_len, uint32_t connection_id); 92 93 /** 94 * @brief Create Put request 95 * @param buffer 96 * @param buffer_len 97 * @param connection_id 98 * @return status 99 */ 100 uint8_t obex_message_builder_request_create_put(uint8_t * buffer, uint16_t buffer_len, uint32_t connection_id); 101 102 103 /** 104 * @brief Create Abort request 105 * @param buffer 106 * @param buffer_len 107 * @param connection_id 108 * @return status 109 */ 110 uint8_t obex_message_builder_request_create_abort(uint8_t * buffer, uint16_t buffer_len, uint32_t connection_id); 111 112 /** 113 * @brief Start Set Path request 114 * @param buffer 115 * @param buffer_len 116 * @param connection_id 117 * @return status 118 */ 119 uint8_t obex_message_builder_request_create_set_path(uint8_t * buffer, uint16_t buffer_len, uint8_t flags, uint32_t connection_id); 120 121 /** 122 * @brief Add SRM Enable 123 * @param buffer 124 * @param buffer_len 125 * @return status 126 */ 127 uint8_t obex_message_builder_header_add_srm_enable(uint8_t * buffer, uint16_t buffer_len); 128 129 /** 130 * @brief Add header with single byte value (8 bit) 131 * @param buffer 132 * @param buffer_len 133 * @param header_type 134 * @param value 135 * @return status 136 */ 137 uint8_t obex_message_builder_header_add_byte(uint8_t * buffer, uint16_t buffer_len, uint8_t header_type, uint8_t value); 138 139 /** 140 * @brief Add header with word value (32 bit) 141 * @param buffer 142 * @param buffer_len 143 * @param header_type 144 * @param value 145 * @return status 146 */ 147 uint8_t obex_message_builder_header_add_word(uint8_t * buffer, uint16_t buffer_len, uint8_t header_type, uint32_t value); 148 149 /** 150 * @brief Add header with variable size 151 * @param buffer 152 * @param buffer_len 153 * @param header_type 154 * @param header_data 155 * @param header_data_length 156 * @return status 157 */ 158 uint8_t obex_message_builder_header_add_variable(uint8_t * buffer, uint16_t buffer_len, uint8_t header_type, const uint8_t * header_data, uint16_t header_data_length); 159 160 /** 161 * @brief Add name header to current request 162 * @param buffer 163 * @param buffer_len 164 * @param name 165 * @return status 166 */ 167 uint8_t obex_message_builder_header_add_name(uint8_t * buffer, uint16_t buffer_len, const char * name); 168 169 /** 170 * @brief Add target header to current request 171 * @param buffer 172 * @param buffer_len 173 * @param target 174 * @param lenght of target 175 * @return status 176 */ 177 uint8_t obex_message_builder_header_add_target(uint8_t * buffer, uint16_t buffer_len, const uint8_t * target, uint16_t length); 178 179 /** 180 * @brief Add type header to current request 181 * @param buffer 182 * @param buffer_len 183 * @param type 184 * @return status 185 */ 186 uint8_t obex_message_builder_header_add_type(uint8_t * buffer, uint16_t buffer_len, const char * type); 187 188 /** 189 * @brief Add count header to current request 190 * @param buffer 191 * @param buffer_len 192 * @param count 193 * @return status 194 */ 195 uint8_t obex_message_builder_header_add_count(uint8_t * buffer, uint16_t buffer_len, uint32_t count); 196 197 /** 198 * @brief Add application parameters header to current request 199 * @param buffer 200 * @param buffer_len 201 * @param data 202 * @param lenght of application parameters 203 * @return status 204 */ 205 uint8_t obex_message_builder_header_add_application_parameters(uint8_t * buffer, uint16_t buffer_len, const uint8_t * data, uint16_t length); 206 207 /** 208 * @brief Add application parameters header to current request 209 * @param buffer 210 * @param buffer_len 211 * @param data 212 * @param lenght of challenge response 213 * @return status 214 */ 215 uint8_t obex_message_builder_header_add_challenge_response(uint8_t * buffer, uint16_t buffer_len, const uint8_t * data, uint16_t length); 216 217 /** 218 * @brief Add body 219 * @param buffer 220 * @param buffer_len 221 * @param data 222 * @param lenght 223 * @return status 224 */ 225 uint8_t obex_message_builder_body_add_static(uint8_t * buffer, uint16_t buffer_len, const uint8_t * data, uint32_t length); 226 227 /* API_END */ 228 229 // int obex_message_builder_body_add_dynamic(uint8_t * buffer, uint16_t buffer_len, uint32_t length, void (*data_callback)(uint32_t offset, uint8_t * buffer, uint32_t len)); 230 231 #if defined __cplusplus 232 } 233 #endif 234 #endif 235 236