xref: /btstack/src/classic/hfp_ag.h (revision 3edc84c5b6b1e23a3d103fe8ce1f6b5ad1df3498)
1 /*
2  * Copyright (C) 2014 BlueKitchen GmbH
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holders nor the names of
14  *    contributors may be used to endorse or promote products derived
15  *    from this software without specific prior written permission.
16  * 4. Any redistribution, use, or modification is done solely for
17  *    personal benefit and not for any commercial purpose or for
18  *    monetary gain.
19  *
20  * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
23  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
24  * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
26  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
27  * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
28  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
30  * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  * Please inquire about commercial licensing options at
34  * [email protected]
35  *
36  */
37 
38 // *****************************************************************************
39 //
40 //  Minimal setup for HFP Audio Gateway (AG) unit (!! UNDER DEVELOPMENT !!)
41 //
42 // *****************************************************************************
43 
44 
45 #ifndef btstack_hfp_ag_h
46 #define btstack_hfp_ag_h
47 
48 #include "hci.h"
49 #include "classic/sdp_query_rfcomm.h"
50 #include "classic/hfp.h"
51 
52 #if defined __cplusplus
53 extern "C" {
54 #endif
55 
56 /* API_START */
57 
58 /**
59  * @brief Create HFP Audio Gateway (AG) SDP service record.
60  */
61 void hfp_ag_create_sdp_record(uint8_t * service, int rfcomm_channel_nr, const char * name, uint8_t ability_to_reject_call, uint16_t supported_features);;
62 
63 /**
64  * @brief Intialize HFP Audio Gateway (AG) device.
65  * TODO:  move optional params into setters
66  */
67 void hfp_ag_init(uint16_t rfcomm_channel_nr, uint32_t supported_features,
68     uint8_t * codecs, int codecs_nr,
69     hfp_ag_indicator_t * ag_indicators, int ag_indicators_nr,
70     hfp_generic_status_indicator_t * hf_indicators, int hf_indicators_nr,
71     const char *call_hold_services[], int call_hold_services_nr);
72 
73 /**
74  * @brief Register callback for the HFP Audio Gateway (AG) client.
75  */
76 void hfp_ag_register_packet_handler(hfp_callback_t callback);
77 
78 /**
79  * @brief Establish RFCOMM connection, and perform service level connection agreement:
80  * - exchange of supported features
81  * - report Audio Gateway (AG) indicators and their status
82  * - enable indicator status update in the AG
83  * - accept the information about available codecs in the Hands-Free (HF), if sent
84  * - report own information describing the call hold and multiparty services, if possible
85  * - report which HF indicators are enabled on the AG, if possible
86  */
87 void hfp_ag_establish_service_level_connection(bd_addr_t bd_addr);
88 
89 /**
90  * @brief Release the RFCOMM channel and the audio connection between the HF and the AG.
91  * TODO: trigger release of the audio connection
92  */
93 void hfp_ag_release_service_level_connection(bd_addr_t bd_addr);
94 
95 /**
96  * @brief Report Extended Audio Gateway Error result codes in the AG.
97  * Whenever there is an error relating to the functionality of the AG as a
98  * result of AT command, the AG shall send +CME ERROR:
99  * - +CME ERROR: 0  - AG failure
100  * - +CME ERROR: 1  - no connection to phone
101  * - +CME ERROR: 3  - operation not allowed
102  * - +CME ERROR: 4  - operation not supported
103  * - +CME ERROR: 5  - PH-SIM PIN required
104  * - +CME ERROR: 10 - SIM not inserted
105  * - +CME ERROR: 11 - SIM PIN required
106  * - +CME ERROR: 12 - SIM PUK required
107  * - +CME ERROR: 13 - SIM failure
108  * - +CME ERROR: 14 - SIM busy
109  * - +CME ERROR: 16 - incorrect password
110  * - +CME ERROR: 17 - SIM PIN2 required
111  * - +CME ERROR: 18 - SIM PUK2 required
112  * - +CME ERROR: 20 - memory full
113  * - +CME ERROR: 21 - invalid index
114  * - +CME ERROR: 23 - memory failure
115  * - +CME ERROR: 24 - text string too long
116  * - +CME ERROR: 25 - invalid characters in text string
117  * - +CME ERROR: 26 - dial string too long
118  * - +CME ERROR: 27 - invalid characters in dial string
119  * - +CME ERROR: 30 - no network service
120  * - +CME ERROR: 31 - network Timeout.
121  * - +CME ERROR: 32 - network not allowed – Emergency calls only
122  */
123 void hfp_ag_report_extended_audio_gateway_error_result_code(bd_addr_t bd_addr, hfp_cme_error_t error);
124 
125 /**
126  * @brief Report the change in AG's call status.
127  * Call status:
128  * - 0 = No calls (held or active)
129  * - 1 = Call is present (active or held)
130  */
131 void hfp_ag_transfer_call_status(bd_addr_t bd_addr, hfp_call_status_t status);
132 
133 /**
134  * @brief Report the change in AG's call setup status.
135  * Call setup status:
136  * - 0 = No call setup in progress
137  * - 1 = Incoming call setup in progress
138  * - 2 = Outgoing call setup in dialing state
139  * - 3 = Outgoing call setup in alerting state
140  */
141 void hfp_ag_transfer_callsetup_status(bd_addr_t bd_addr, hfp_callsetup_status_t status);
142 
143 /**
144  * @brief Report the change in AG's held call status.
145  * Held call status:
146  * - 0 = No calls held
147  * - 1 = Call is placed on hold or active/held calls are swapped
148  * - 2 = Call on hold, no active calls
149  */
150 void hfp_ag_transfer_callheld_status(bd_addr_t bd_addr, hfp_callheld_status_t status);
151 
152 /**
153  * @brief
154  */
155 void hfp_ag_negotiate_codecs(bd_addr_t bd_addr);
156 
157 void hfp_ag_establish_audio_connection(bd_addr_t bd_addr);
158 
159 /**
160  * @brief
161  */
162 void hfp_ag_release_audio_connection(bd_addr_t bd_addr);
163 
164 
165 /* API_END */
166 
167 #if defined __cplusplus
168 }
169 #endif
170 
171 #endif