xref: /btstack/src/btstack_util.h (revision 8974fcd6cf20b16173cce26fdeacd4051c3413f7)

/*
 * Copyright (C) 2014 BlueKitchen GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 4. Any redistribution, use, or modification is done solely for
 *    personal benefit and not for any commercial purpose or for
 *    monetary gain.
 *
 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Please inquire about commercial licensing options at
 * [email protected]
 *
 */

/*
 *  btstack_util.h
 *
 *  General utility functions
 *
 *  Created by Matthias Ringwald on 7/23/09.
 */

#ifndef __BTSTACK_UTIL_H
#define __BTSTACK_UTIL_H


#if defined __cplusplus
extern "C" {
#endif

#include <stdint.h>
#include "bluetooth.h"
#include "btstack_defines.h"
#include "btstack_linked_list.h"

// will be moved to daemon/btstack_device_name_db.h

/**
 * @brief The device name type
 */
#define DEVICE_NAME_LEN 248
typedef uint8_t device_name_t[DEVICE_NAME_LEN+1];


// helper for BT little endian format
#define little_endian_read_16( buffer, pos) ( ((uint16_t) buffer[pos]) | (((uint16_t)buffer[(pos)+1]) << 8))
#define little_endian_read_24( buffer, pos) ( ((uint32_t) buffer[pos]) | (((uint32_t)buffer[(pos)+1]) << 8) | (((uint32_t)buffer[(pos)+2]) << 16))
#define little_endian_read_32( buffer, pos) ( ((uint32_t) buffer[pos]) | (((uint32_t)buffer[(pos)+1]) << 8) | (((uint32_t)buffer[(pos)+2]) << 16) | (((uint32_t) buffer[(pos)+3])) << 24)

// helper for SDP big endian format
#define big_endian_read_16( buffer, pos) ( ((uint16_t) buffer[(pos)+1]) | (((uint16_t)buffer[ pos   ]) << 8))
#define bit_endian_read_32( buffer, pos) ( ((uint32_t) buffer[(pos)+3]) | (((uint32_t)buffer[(pos)+2]) << 8) | (((uint32_t)buffer[(pos)+1]) << 16) | (((uint32_t) buffer[pos])) << 24)

// HCI CMD OGF/OCF
#define READ_CMD_OGF(buffer) (buffer[1] >> 2)
#define READ_CMD_OCF(buffer) ((buffer[1] & 0x03) << 8 | buffer[0])

// check if command complete event for given command
#define COMMAND_COMPLETE_EVENT(event,cmd) ( event[0] == HCI_EVENT_COMMAND_COMPLETE && little_endian_read_16(event,3) == cmd.opcode)
#define COMMAND_STATUS_EVENT(event,cmd) ( event[0] == HCI_EVENT_COMMAND_STATUS && little_endian_read_16(event,4) == cmd.opcode)

// Code+Len=2, Pkts+Opcode=3; total=5
#define OFFSET_OF_DATA_IN_COMMAND_COMPLETE 5

// ACL Packet
#define READ_ACL_CONNECTION_HANDLE( buffer ) ( little_endian_read_16(buffer,0) & 0x0fff)
#define READ_ACL_FLAGS( buffer )      ( buffer[1] >> 4 )
#define READ_ACL_LENGTH( buffer )     (little_endian_read_16(buffer, 2))

// L2CAP Packet
#define READ_L2CAP_LENGTH(buffer)     ( little_endian_read_16(buffer, 4))
#define READ_L2CAP_CHANNEL_ID(buffer) ( little_endian_read_16(buffer, 6))

void little_endian_store_16(uint8_t *buffer, uint16_t pos, uint16_t value);
void little_endian_store_32(uint8_t *buffer, uint16_t pos, uint32_t value);
void bt_flip_addr(bd_addr_t dest, bd_addr_t src);

void big_endian_store_16(uint8_t *buffer, uint16_t pos, uint16_t value);
void big_endian_store_32(uint8_t *buffer, uint16_t pos, uint32_t value);

// hack: compilation with the android ndk causes an error as there's a swap64 macro
#ifdef swap64
#undef swap64
#endif

void swapX  (const uint8_t *src, uint8_t * dst, int len);
void swap24 (const uint8_t *src, uint8_t * dst);
void swap48 (const uint8_t *src, uint8_t * dst);
void swap56 (const uint8_t *src, uint8_t * dst);
void swap64 (const uint8_t *src, uint8_t * dst);
void swap128(const uint8_t *src, uint8_t * dst);

char char_for_nibble(int nibble);

void printf_hexdump(const void *data, int size);
void hexdump(const void *data, int size);
void hexdumpf(const void *data, int size);
char * uuid128_to_str(uint8_t * uuid);
void printUUID128(uint8_t *uuid);
void log_key(const char * name, sm_key_t key);

// @deprecated please use more convenient bd_addr_to_str
void print_bd_addr( bd_addr_t addr);

char * bd_addr_to_str(bd_addr_t addr);
char * link_key_to_str(link_key_t link_key);
char *link_key_type_to_str(link_key_type_t link_key);

void sdp_normalize_uuid(uint8_t *uuid, uint32_t shortUUID);
int  sdp_has_blueooth_base_uuid(uint8_t * uuid128);

int sscan_bd_addr(uint8_t * addr_string, bd_addr_t addr);
int sscan_link_key(char * addr_string, link_key_t link_key);

uint8_t crc8_check(uint8_t *data, uint16_t len, uint8_t check_sum);
uint8_t crc8_calc(uint8_t *data, uint16_t len);

#define BD_ADDR_CMP(a,b) memcmp(a,b, BD_ADDR_LEN)
#define BD_ADDR_COPY(dest,src) memcpy(dest,src,BD_ADDR_LEN)

int is_authenticated_link_key(link_key_type_t link_key_type);

#if defined __cplusplus
}
#endif

#endif // __BTSTACK_UTIL_H