xref: /btstack/src/bluetooth.h (revision 0d5b1baf9afdfa836ed0568381e9cc92b398d8f7)

/*
 * Copyright (C) 2015 BlueKitchen GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 4. Any redistribution, use, or modification is done solely for
 *    personal benefit and not for any commercial purpose or for
 *    monetary gain.
 *
 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN
 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Please inquire about commercial licensing options at
 * [email protected]
 *
 */

/*
 * bluetooth.h
 *
 * Numbers defined or derived from the official Bluetooth specification
 */

#ifndef BLUETOOTH_H
#define BLUETOOTH_H

#include <stdint.h>

/**
 * @brief hci connection handle type
 */
typedef uint16_t hci_con_handle_t;

/**
 * @brief Length of a bluetooth device address.
 */
#define BD_ADDR_LEN 6

/**
 * @brief Bluetooth address
 */
typedef uint8_t bd_addr_t[BD_ADDR_LEN];

/**
 * Address types
 * @note: BTstack uses a custom addr type to refer to classic ACL and SCO devices
 */
 typedef enum {
    BD_ADDR_TYPE_LE_PUBLIC = 0,
    BD_ADDR_TYPE_LE_RANDOM = 1,
    BD_ADDR_TYPE_LE_PRIVAT_FALLBACK_PUBLIC = 2,
    BD_ADDR_TYPE_LE_PRIVAT_FALLBACK_RANDOM = 3,
    BD_ADDR_TYPE_SCO       = 0xfc,
    BD_ADDR_TYPE_ACL       = 0xfd,
    BD_ADDR_TYPE_UNKNOWN   = 0xfe,  // also used as 'invalid'
} bd_addr_type_t;

/**
 * Link types for BR/EDR Connections
 */
typedef enum {
    HCI_LINK_TYPE_SCO  = 0,
    HCI_LINK_TYPE_ACL  = 1,
    HCI_LINK_TYPE_ESCO = 2,
} hci_link_type_t;


/**
 * @brief link key
 */
#define LINK_KEY_LEN 16
#define LINK_KEY_STR_LEN (LINK_KEY_LEN*2)
typedef uint8_t link_key_t[LINK_KEY_LEN];

/**
 * @brief link key type
 */
typedef enum {
  INVALID_LINK_KEY = 0xffff,
  COMBINATION_KEY = 0,  // standard pairing
  LOCAL_UNIT_KEY,     // ?
  REMOTE_UNIT_KEY,    // ?
  DEBUG_COMBINATION_KEY,  // SSP with debug
  UNAUTHENTICATED_COMBINATION_KEY_GENERATED_FROM_P192, // SSP Simple Pairing
  AUTHENTICATED_COMBINATION_KEY_GENERATED_FROM_P192,   // SSP Passkey, Number confirm, OOB
  CHANGED_COMBINATION_KEY,               // Link key changed using Change Connection Lnk Key
  UNAUTHENTICATED_COMBINATION_KEY_GENERATED_FROM_P256, // SSP Simpe Pairing
  AUTHENTICATED_COMBINATION_KEY_GENERATED_FROM_P256,   // SSP Passkey, Number confirm, OOB
} link_key_type_t;

/**
 * @brief Extended Inquiry Response
 */
#define EXTENDED_INQUIRY_RESPONSE_DATA_LEN 240

/**
 * @brief Inquiry modes
 */
typedef enum {
  INQUIRY_MODE_STANDARD = 0,
  INQUIRY_MODE_RSSI,
  INQUIRY_MODE_RSSI_AND_EIR,
} inquiry_mode_t;

/**
 * @brief Page Scan Types
 */
typedef enum {
    PAGE_SCAN_MODE_STANDARD = 0,
    PAGE_SCAN_MODE_INTERLACED,
} page_scan_type_t;

/**
 * @brief Inquiry Scan Types
 */
typedef enum {
    INQUIRY_SCAN_MODE_STANDARD = 0,
    INQUIRY_SCAN_MODE_INTERLACED,
} inquiry_scan_type_t;

/**
 * Link Supervision Timeout Default, 0x7d00 * 0.625ms = 20s
 */
#define HCI_LINK_SUPERVISION_TIMEOUT_DEFAULT 0x7D00

/**
 * Service Type used for QoS Setup and Flow Specification
 */
typedef enum {
    HCI_SERVICE_TYPE_NO_TRAFFIC = 0,
    HCI_SERVICE_TYPE_BEST_EFFORT,
    HCI_SERVICE_TYPE_GUARANTEED,
    HCI_SERVICE_TYPE_INVALID,
} hci_service_type_t;

/**
 * HCI Transport
 */

/**
 * packet types - used in BTstack and over the H4 UART interface
 */
#define HCI_COMMAND_DATA_PACKET 0x01
#define HCI_ACL_DATA_PACKET     0x02
#define HCI_SCO_DATA_PACKET     0x03
#define HCI_EVENT_PACKET        0x04
#define HCI_ISO_DATA_PACKET     0x05

/**
 * HCI Layer
 */

//
// Error Codes rfom Bluetooth Core Specification
//

/* ENUM_START: BLUETOOTH_ERROR_CODE */
#define ERROR_CODE_SUCCESS                                 0x00
#define ERROR_CODE_UNKNOWN_HCI_COMMAND                     0x01
#define ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER           0x02
#define ERROR_CODE_HARDWARE_FAILURE                        0x03
#define ERROR_CODE_PAGE_TIMEOUT                            0x04
#define ERROR_CODE_AUTHENTICATION_FAILURE                  0x05
#define ERROR_CODE_PIN_OR_KEY_MISSING                      0x06
#define ERROR_CODE_MEMORY_CAPACITY_EXCEEDED                0x07
#define ERROR_CODE_CONNECTION_TIMEOUT                      0x08
#define ERROR_CODE_CONNECTION_LIMIT_EXCEEDED               0x09
#define ERROR_CODE_SYNCHRONOUS_CONNECTION_LIMIT_TO_A_DEVICE_EXCEEDED  0x0A
#define ERROR_CODE_ACL_CONNECTION_ALREADY_EXISTS           0x0B
#define ERROR_CODE_COMMAND_DISALLOWED                      0x0C
#define ERROR_CODE_CONNECTION_REJECTED_DUE_TO_LIMITED_RESOURCES 0x0D
#define ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS  0x0E
#define ERROR_CODE_CONNECTION_REJECTED_DUE_TO_UNACCEPTABLE_BD_ADDR 0x0F
#define ERROR_CODE_CONNECTION_ACCEPT_TIMEOUT_EXCEEDED      0x10
#define ERROR_CODE_UNSUPPORTED_FEATURE_OR_PARAMETER_VALUE  0x11
#define ERROR_CODE_INVALID_HCI_COMMAND_PARAMETERS          0x12
#define ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION       0x13
#define ERROR_CODE_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES 0x14
#define ERROR_CODE_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_POWER_OFF     0x15
#define ERROR_CODE_CONNECTION_TERMINATED_BY_LOCAL_HOST     0x16
#define ERROR_CODE_REPEATED_ATTEMPTS                       0x17
#define ERROR_CODE_PAIRING_NOT_ALLOWED                     0x18
#define ERROR_CODE_UNKNOWN_LMP_PDU                         0x19
#define ERROR_CODE_UNSUPPORTED_REMOTE_FEATURE_UNSUPPORTED_LMP_FEATURE 0x1A
#define ERROR_CODE_SCO_OFFSET_REJECTED                     0x1B
#define ERROR_CODE_SCO_INTERVAL_REJECTED                   0x1C
#define ERROR_CODE_SCO_AIR_MODE_REJECTED                   0x1D
#define ERROR_CODE_INVALID_LMP_PARAMETERS_INVALID_LL_PARAMETERS 0x1E
#define ERROR_CODE_UNSPECIFIED_ERROR                       0x1F
#define ERROR_CODE_UNSUPPORTED_LMP_PARAMETER_VALUE_UNSUPPORTED_LL_PARAMETER_VALUE 0x20
#define ERROR_CODE_ROLE_CHANGE_NOT_ALLOWED                 0x21
#define ERROR_CODE_LMP_RESPONSE_TIMEOUT_LL_RESPONSE_TIMEOUT 0x22
#define ERROR_CODE_LMP_ERROR_TRANSACTION_COLLISION         0x23
#define ERROR_CODE_LMP_PDU_NOT_ALLOWED                     0x24
#define ERROR_CODE_ENCRYPTION_MODE_NOT_ACCEPTABLE          0x25
#define ERROR_CODE_LINK_KEY_CANNOT_BE_CHANGED              0x26
#define ERROR_CODE_REQUESTED_QOS_NOT_SUPPORTED             0x27
#define ERROR_CODE_INSTANT_PASSED                          0x28
#define ERROR_CODE_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED     0x29
#define ERROR_CODE_DIFFERENT_TRANSACTION_COLLISION         0x2A
#define ERROR_CODE_RESERVED                                0x2B
#define ERROR_CODE_QOS_UNACCEPTABLE_PARAMETER              0x2C
#define ERROR_CODE_QOS_REJECTED                            0x2D
#define ERROR_CODE_CHANNEL_CLASSIFICATION_NOT_SUPPORTED    0x2E
#define ERROR_CODE_INSUFFICIENT_SECURITY                   0x2F
#define ERROR_CODE_PARAMETER_OUT_OF_MANDATORY_RANGE        0x30
// #define ERROR_CODE_RESERVED
#define ERROR_CODE_ROLE_SWITCH_PENDING                     0x32
// #define ERROR_CODE_RESERVED
#define ERROR_CODE_RESERVED_SLOT_VIOLATION                 0x34
#define ERROR_CODE_ROLE_SWITCH_FAILED                      0x35
#define ERROR_CODE_EXTENDED_INQUIRY_RESPONSE_TOO_LARGE     0x36
#define ERROR_CODE_SECURE_SIMPLE_PAIRING_NOT_SUPPORTED_BY_HOST 0x37
#define ERROR_CODE_HOST_BUSY_PAIRING                       0x38
#define ERROR_CODE_CONNECTION_REJECTED_DUE_TO_NO_SUITABLE_CHANNEL_FOUND 0x39
#define ERROR_CODE_CONTROLLER_BUSY                         0x3A
#define ERROR_CODE_UNACCEPTABLE_CONNECTION_PARAMETERS      0x3B
#define ERROR_CODE_DIRECTED_ADVERTISING_TIMEOUT            0x3C
#define ERROR_CODE_CONNECTION_TERMINATED_DUE_TO_MIC_FAILURE 0x3D
#define ERROR_CODE_CONNECTION_FAILED_TO_BE_ESTABLISHED     0x3E
#define ERROR_CODE_MAC_CONNECTION_FAILED                   0x3F
#define ERROR_CODE_COARSE_CLOCK_ADJUSTMENT_REJECTED_BUT_WILL_TRY_TO_ADJUST_USING_CLOCK_DRAGGING 0x40

// BTstack defined ERRORS, mapped into BLuetooth status code range

#define BTSTACK_CONNECTION_TO_BTDAEMON_FAILED              0x50
#define BTSTACK_ACTIVATION_FAILED_SYSTEM_BLUETOOTH         0x51
#define BTSTACK_ACTIVATION_POWERON_FAILED                  0x52
#define BTSTACK_ACTIVATION_FAILED_UNKNOWN                  0x53
#define BTSTACK_NOT_ACTIVATED                              0x54
#define BTSTACK_BUSY                                       0x55
#define BTSTACK_MEMORY_ALLOC_FAILED                        0x56
#define BTSTACK_ACL_BUFFERS_FULL                           0x57

// l2cap errors - enumeration by the command that created them
#define L2CAP_COMMAND_REJECT_REASON_COMMAND_NOT_UNDERSTOOD 0x60
#define L2CAP_COMMAND_REJECT_REASON_SIGNALING_MTU_EXCEEDED 0x61
#define L2CAP_COMMAND_REJECT_REASON_INVALID_CID_IN_REQUEST 0x62

#define L2CAP_CONNECTION_RESPONSE_RESULT_SUCCESSFUL        0x63
#define L2CAP_CONNECTION_RESPONSE_RESULT_PENDING           0x64
#define L2CAP_CONNECTION_RESPONSE_RESULT_REFUSED_PSM       0x65
#define L2CAP_CONNECTION_RESPONSE_RESULT_REFUSED_SECURITY  0x66
#define L2CAP_CONNECTION_RESPONSE_RESULT_REFUSED_RESOURCES 0x67
#define L2CAP_CONNECTION_RESPONSE_RESULT_ERTM_NOT_SUPPORTED 0x68

// should be L2CAP_CONNECTION_RTX_TIMEOUT
#define L2CAP_CONNECTION_RESPONSE_RESULT_RTX_TIMEOUT       0x69
#define L2CAP_CONNECTION_BASEBAND_DISCONNECT               0x6A
#define L2CAP_SERVICE_ALREADY_REGISTERED                   0x6B
#define L2CAP_DATA_LEN_EXCEEDS_REMOTE_MTU                  0x6C
#define L2CAP_SERVICE_DOES_NOT_EXIST                       0x6D
#define L2CAP_LOCAL_CID_DOES_NOT_EXIST                     0x6E
#define L2CAP_CONNECTION_RESPONSE_UNKNOWN_ERROR            0x6F

#define RFCOMM_MULTIPLEXER_STOPPED                         0x70
#define RFCOMM_CHANNEL_ALREADY_REGISTERED                  0x71
#define RFCOMM_NO_OUTGOING_CREDITS                         0x72
#define RFCOMM_AGGREGATE_FLOW_OFF                          0x73
#define RFCOMM_DATA_LEN_EXCEEDS_MTU                        0x74

#define HFP_REMOTE_REJECTS_AUDIO_CONNECTION                0x7F

#define SDP_HANDLE_ALREADY_REGISTERED                      0x80
#define SDP_QUERY_INCOMPLETE                               0x81
#define SDP_SERVICE_NOT_FOUND                              0x82
#define SDP_HANDLE_INVALID                                 0x83
#define SDP_QUERY_BUSY                                     0x84

#define ATT_HANDLE_VALUE_INDICATION_IN_PROGRESS            0x90
#define ATT_HANDLE_VALUE_INDICATION_TIMEOUT                0x91
#define ATT_HANDLE_VALUE_INDICATION_DISCONNECT             0x92

#define GATT_CLIENT_NOT_CONNECTED                          0x93
#define GATT_CLIENT_BUSY                                   0x94
#define GATT_CLIENT_IN_WRONG_STATE                         0x95
#define GATT_CLIENT_DIFFERENT_CONTEXT_FOR_ADDRESS_ALREADY_EXISTS 0x96
#define GATT_CLIENT_VALUE_TOO_LONG                         0x97
#define GATT_CLIENT_CHARACTERISTIC_NOTIFICATION_NOT_SUPPORTED 0x98
#define GATT_CLIENT_CHARACTERISTIC_INDICATION_NOT_SUPPORTED   0x99

#define BNEP_SERVICE_ALREADY_REGISTERED                    0xA0
#define BNEP_CHANNEL_NOT_CONNECTED                         0xA1
#define BNEP_DATA_LEN_EXCEEDS_MTU                          0xA2

// OBEX ERRORS
#define OBEX_UNKNOWN_ERROR                                 0xB0
#define OBEX_CONNECT_FAILED                                0xB1
#define OBEX_DISCONNECTED                                  0xB2
#define OBEX_NOT_FOUND                                     0xB3
#define OBEX_NOT_ACCEPTABLE                                0xB4
#define OBEX_ABORTED                                       0xB5

#define MESH_ERROR_APPKEY_INDEX_INVALID                    0xD0
/* ENUM_END */


/* ENUM_START: AVRCP_BROWSING_ERROR_CODE */
#define AVRCP_BROWSING_ERROR_CODE_INVALID_COMMAND                     0x00  // Sent if TG received a PDU that it did not understand. Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_INVALID_PARAMETER                   0x01  // Sent if the TG received a PDU with a parameter ID that it did not understand. Sent if there is only one parameter ID in the PDU. Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_SPECIFIED_PARAMETER_NOT_FOUND       0x02  // Sent if the parameter ID is understood, but content is wrong or corrupted. Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_INTERNAL_ERROR                      0x03  // Sent if there are error conditions not covered by a more specific error code. Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_SUCCESS                             0x04  // This is the status that should be returned if the operation was successful. Valid for All except where the response CType is AV/C REJECTED.
#define AVRCP_BROWSING_ERROR_CODE_UID_CHANGED                         0x05  // The UIDs on the device have changed. Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_RESERVED_06                         0x06  // Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_INVALID_DIRECTION                   0x07  // The Direction parameter is invalid. Valid for Change Path.
#define AVRCP_BROWSING_ERROR_CODE_NOT_A_DIRECTORY                     0x08  // The UID provided does not refer to a folder item. Valid for Change Path.
#define AVRCP_BROWSING_ERROR_CODE_DOES_NOT_EXIST                      0x09  // The UID provided does not refer to any currently valid. Valid for Change Path, PlayItem, AddToNowPlaying, GetItemAttributes.
#define AVRCP_BROWSING_ERROR_CODE_INVALID_SCOPE                       0x0a  // The scope parameter is invalid. Valid for GetFolderItems, PlayItem, AddToNowPlayer, GetItemAttributes,.
#define AVRCP_BROWSING_ERROR_CODE_RANGE_OUT_OF_BOUNDS                 0x0b  // The start of range provided is not valid. Valid for GetFolderItems.
#define AVRCP_BROWSING_ERROR_CODE_UID_IS_A_DIRECTORY                  0x0c  // The UID provided refers to a directory, which cannot be handled by this media player. Valid for PlayItem, AddToNowPlaying.
#define AVRCP_BROWSING_ERROR_CODE_MEDIA_IN_USES                       0x0d  // The media is not able to be used for this operation at this time. Valid for PlayItem, AddToNowPlaying.
#define AVRCP_BROWSING_ERROR_CODE_NOW_PLAYING_LIST_FULL               0x0e  // No more items can be added to the Now Playing List. Valid for AddToNowPlaying.
#define AVRCP_BROWSING_ERROR_CODE_SEARCH_NOT_SUPPORTED                0x0f  // The Browsed Media Player does not support search. Valid for Search.
#define AVRCP_BROWSING_ERROR_CODE_SEARCH_IN_PROGRESS                  0x10  // A search operation is already in progress. Valid for Search.
#define AVRCP_BROWSING_ERROR_CODE_INVALID_PLAYER_ID                   0x11  // The specified Player Id does not refer to a valid player. Valid for SetAddressedPlayer, SetBrowsedPlayer.
#define AVRCP_BROWSING_ERROR_CODE_PLAYER_NOT_BROWSABLE                0x12  // The Player Id supplied refers to a Media Player which does not support browsing. Valid for SetBrowsedPlayer.
#define AVRCP_BROWSING_ERROR_CODE_PLAYER_NOT_ADDRESSED                0x13  // The Player Id supplied refers to a player which is not currently addressed, and the command is not able to be performed if the player is not set as addressed. Valid for Search SetBrowsedPlayer.
#define AVRCP_BROWSING_ERROR_CODE_NO_VALID_SEARCH_RESULTS             0x14  // The Search result list does not contain valid entries, e.g. after being invalidated due to change of browsed player. Valid for GetFolderItems.
#define AVRCP_BROWSING_ERROR_CODE_NO_AVAILABLE_PLAYERS                0x15  // Valid for All.
#define AVRCP_BROWSING_ERROR_CODE_ADDRESSED_PLAYER_CHANGED            0x16  // Valid for Register Notification.
// 0x17-0xff Reserved
/* ENUM_END */

// HCI roles
typedef enum {
    HCI_ROLE_MASTER = 0,
    HCI_ROLE_SLAVE  = 1,
    HCI_ROLE_INVALID = 0xff,
} hci_role_t;

// packet sizes (max payload)
#define HCI_ACL_DM1_SIZE            17
#define HCI_ACL_DH1_SIZE            27
#define HCI_ACL_2DH1_SIZE           54
#define HCI_ACL_3DH1_SIZE           83
#define HCI_ACL_DM3_SIZE           121
#define HCI_ACL_DH3_SIZE           183
#define HCI_ACL_DM5_SIZE           224
#define HCI_ACL_DH5_SIZE           339
#define HCI_ACL_2DH3_SIZE          367
#define HCI_ACL_3DH3_SIZE          552
#define HCI_ACL_2DH5_SIZE          679
#define HCI_ACL_3DH5_SIZE         1021

#define LE_ADVERTISING_DATA_SIZE    31
#define LE_EXTENDED_ADVERTISING_MAX_HANDLE 0xEFu
#define LE_EXTENDED_ADVERTISING_MAX_CHUNK_LEN 251

// advertising event properties for extended advertising
#define LE_ADVERTISING_PROPERTIES_CONNECTABLE      (1u<<0)
#define LE_ADVERTISING_PROPERTIES_SCANNABLE        (1u<<1)
#define LE_ADVERTISING_PROPERTIES_DIRECTED         (1u<<2)
#define LE_ADVERTISING_PROPERTIES_HIGH_DUTY_CYCLE  (1u<<3)
#define LE_ADVERTISING_PROPERTIES_LEGACY           (1u<<4)
#define LE_ADVERTISING_PROPERTIES_ANONYMOUS        (1u<<5)
#define LE_ADVERTISING_PROPERTIES_INCLUDE_TX_POWER (1u<<6)


// SCO Packet Types
#define SCO_PACKET_TYPES_NONE  0x0000
#define SCO_PACKET_TYPES_HV1   0x0001
#define SCO_PACKET_TYPES_HV3   0x0004
#define SCO_PACKET_TYPES_EV3   0x0008
#define SCO_PACKET_TYPES_2EV3  0x0040
#define SCO_PACKET_TYPES_ALL   0x03FF

// Link Policy Settings
#define LM_LINK_POLICY_DISABLE_ALL_LM_MODES  0
#define LM_LINK_POLICY_ENABLE_ROLE_SWITCH    1
#define LM_LINK_POLICY_ENABLE_HOLD_MODE      2
#define LM_LINK_POLICY_ENABLE_SNIFF_MODE     4

// ACL Connection Modes
#define ACL_CONNECTION_MODE_ACTIVE 0
#define ACL_CONNECTION_MODE_HOLD   1
#define ACL_CONNECTION_MODE_SNIFF  2

/**
 * Default INQ Mode
 */
#define GAP_IAC_GENERAL_INQUIRY 0x9E8B33L // General/Unlimited Inquiry Access Code (GIAC)
#define GAP_IAC_LIMITED_INQUIRY 0x9E8B00L // Limited Dedicated Inquiry Access Code (LIAC)

/**
 * SSP IO Capabilities
 */
#define SSP_IO_CAPABILITY_DISPLAY_ONLY   0
#define SSP_IO_CAPABILITY_DISPLAY_YES_NO 1
#define SSP_IO_CAPABILITY_KEYBOARD_ONLY  2
#define SSP_IO_CAPABILITY_NO_INPUT_NO_OUTPUT 3
#define SSP_IO_CAPABILITY_UNKNOWN 0xff


/**
 * SSP Authentication Requirements, see IO Capability Request Reply Commmand
 */

// Numeric comparison with automatic accept allowed.
#define SSP_IO_AUTHREQ_MITM_PROTECTION_NOT_REQUIRED_NO_BONDING 0x00

// Use IO Capabilities to deter- mine authentication procedure
#define SSP_IO_AUTHREQ_MITM_PROTECTION_REQUIRED_NO_BONDING 0x01

// Numeric compar- ison with automatic accept allowed.
#define SSP_IO_AUTHREQ_MITM_PROTECTION_NOT_REQUIRED_DEDICATED_BONDING 0x02

// Use IO Capabilities to determine authentication procedure
#define SSP_IO_AUTHREQ_MITM_PROTECTION_REQUIRED_DEDICATED_BONDING 0x03

// Numeric Compari- son with automatic accept allowed.
#define SSP_IO_AUTHREQ_MITM_PROTECTION_NOT_REQUIRED_GENERAL_BONDING 0x04

// Use IO capabilities to determine authentication procedure.
#define SSP_IO_AUTHREQ_MITM_PROTECTION_REQUIRED_GENERAL_BONDING 0x05


// OGFs
#define OGF_LINK_CONTROL          0x01
#define OGF_LINK_POLICY           0x02
#define OGF_CONTROLLER_BASEBAND   0x03
#define OGF_INFORMATIONAL_PARAMETERS 0x04
#define OGF_STATUS_PARAMETERS     0x05
#define OGF_TESTING               0x06
#define OGF_LE_CONTROLLER 0x08
#define OGF_VENDOR  0x3f




/**
 * L2CAP Layer
 */

#define L2CAP_HEADER_SIZE 4

// minimum signaling MTU
#define L2CAP_MINIMAL_MTU 48
#define L2CAP_DEFAULT_MTU 672

// Minimum/default MTU
#define L2CAP_LE_DEFAULT_MTU  23

// L2CAP Fixed Channel IDs
#define L2CAP_CID_SIGNALING                        0x0001
#define L2CAP_CID_CONNECTIONLESS_CHANNEL           0x0002
#define L2CAP_CID_ATTRIBUTE_PROTOCOL               0x0004
#define L2CAP_CID_SIGNALING_LE                     0x0005
#define L2CAP_CID_SECURITY_MANAGER_PROTOCOL        0x0006
#define L2CAP_CID_BR_EDR_SECURITY_MANAGER          0x0007

// L2CAP Channels in Basic and Enhanced Retransmission Mode

// connection response result
#define L2CAP_CONNECTION_RESULT_SUCCESS                         0x0000
#define L2CAP_CONNECTION_RESULT_PENDING                         0x0001
#define L2CAP_CONNECTION_RESULT_PSM_NOT_SUPPORTED               0x0002
#define L2CAP_CONNECTION_RESULT_SECURITY_BLOCK                  0x0003
#define L2CAP_CONNECTION_RESULT_NO_RESOURCES_AVAILABLE          0x0004
#define L2CAP_CONNECTION_RESULT_INVALID_SOURCE_CID              0x0006
#define L2CAP_CONNECTION_RESULT_SOURCE_CID_ALREADY_ALLOCATED    0x0007

// L2CAP Channels in LE Credit-Based Flow-Control Mode

// connection response result
#define L2CAP_CBM_CONNECTION_RESULT_SUCCESS                         0x0000
#define L2CAP_CBM_CONNECTION_RESULT_SPSM_NOT_SUPPORTED              0x0002
#define L2CAP_CBM_CONNECTION_RESULT_NO_RESOURCES_AVAILABLE          0x0004
#define L2CAP_CBM_CONNECTION_RESULT_INSUFFICIENT_AUTHENTICATION     0x0005
#define L2CAP_CBM_CONNECTION_RESULT_INSUFFICIENT_AUTHORIZATION      0x0006
#define L2CAP_CBM_CONNECTION_RESULT_ENCYRPTION_KEY_SIZE_TOO_SHORT   0x0007
#define L2CAP_CBM_CONNECTION_RESULT_INSUFFICIENT_ENCRYPTION         0x0008
#define L2CAP_CBM_CONNECTION_RESULT_INVALID_SOURCE_CID              0x0009
#define L2CAP_CBM_CONNECTION_RESULT_SOURCE_CID_ALREADY_ALLOCATED    0x000A
#define L2CAP_CBM_CONNECTION_RESULT_UNACCEPTABLE_PARAMETERS         0x000B


// L2CAP Channels in Enhanced Credit-Based Flow-Control Mode

// number of CIDs in single connection+reconfiguration request/response
#define L2CAP_ECBM_MAX_CID_ARRAY_SIZE        5

// connection response result
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_SUCCESS                                    0x0000
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_SPSM_NOT_SUPPORTED                 0x0002
#define L2CAP_ECBM_CONNECTION_RESULT_SOME_REFUSED_INSUFFICIENT_RESOURCES_AVAILABLE  0x0004
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_INSUFFICIENT_AUTHENTICATION        0x0005
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_INSUFFICIENT_AUTHORIZATION         0x0006
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_ENCYRPTION_KEY_SIZE_TOO_SHORT      0x0007
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_INSUFFICIENT_ENCRYPTION            0x0008
#define L2CAP_ECBM_CONNECTION_RESULT_SOME_REFUSED_INVALID_SOURCE_CID                0x0009
#define L2CAP_ECBM_CONNECTION_RESULT_SOME_REFUSED_SOURCE_CID_ALREADY_ALOCATED       0x000A
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_UNACCEPTABLE_PARAMETERS            0x000B
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_REFUSED_INVALID_PARAMETERS                 0x000C
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_PENDING_NO_FURTHER_INFORMATION             0x000D
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_PENDING_AUTHENTICATION                     0x000E
#define L2CAP_ECBM_CONNECTION_RESULT_ALL_PENDING_AUTHORIZATION                      0x000F


// Result for Reconfigure Request
#define L2CAP_ECBM_RECONFIGURE_SUCCESS                                 0
#define L2CAP_ECBM_RECONFIGURE_FAILED_MTU_REDUCTION_NOT_ALLOWED        1
#define L2CAP_ECBM_RECONFIGURE_FAILED_MPS_REDUCTION_MULTIPLE_CHANNELS  2
#define L2CAP_ECBM_RECONFIGURE_FAILED_DESTINATION_CID_INVALID          3
#define L2CAP_ECBM_RECONFIGURE_FAILED_UNACCEPTABLE_PARAMETERS          4

/**
 * SDP Protocol
 */

// Device Vendor ID Sources
#define DEVICE_ID_VENDOR_ID_SOURCE_BLUETOOTH 0x0001
#define DEVICE_ID_VENDOR_ID_SOURCE_USB       0x0002

// OBEX
#define SDP_vCard_2_1       0x01
#define SDP_vCard_3_0       0x02
#define SDP_vCal_1_0        0x03
#define SDP_iCal_2_0        0x04
#define SDP_vNote           0x05
#define SDP_vMessage        0x06
#define SDP_OBEXFileTypeAny 0xFF

/**
 * RFCOMM Protocol
 */

// Line Status
#define LINE_STATUS_NO_ERROR       0x00
#define LINE_STATUS_OVERRUN_ERROR  0x03
#define LINE_STATUS_PARITY_ERORR   0x05
#define LINE_STATUS_FRAMING_ERROR  0x09

// Modem Status Flags
#define MODEM_STATUS_FC   0x02
#define MODEM_STATUS_RTC  0x04
#define MODEM_STATUS_RTR  0x08
#define MODEM_STATUS_IC   0x40
#define MODEM_STATUS_DV   0x80

typedef enum rpn_baud {
    RPN_BAUD_2400 = 0,
    RPN_BAUD_4800,
    RPN_BAUD_7200,
    RPN_BAUD_9600,
    RPN_BAUD_19200,
    RPN_BAUD_38400,
    RPN_BAUD_57600,
    RPN_BAUD_115200,
    RPN_BAUD_230400
} rpn_baud_t;

typedef enum rpn_data_bits {
    RPN_DATA_BITS_5 = 0,
    RPN_DATA_BITS_6 = 0,
    RPN_DATA_BITS_7 = 0,
    RPN_DATA_BITS_8 = 0
} rpn_data_bits_t;

typedef enum rpn_stop_bits {
    RPN_STOP_BITS_1_0 = 0,
    RPN_STOP_BITS_1_5
} rpn_stop_bits_t;

typedef enum rpn_parity {
    RPN_PARITY_NONE  = 0,
    RPN_PARITY_ODD   = 1,
    RPN_PARITY_EVEN  = 3,
    RPN_PARITY_MARK  = 5,
    RPN_PARITY_SPACE = 7,
} rpn_parity_t;

#define RPN_FLOW_CONTROL_XONXOFF_ON_INPUT  0x01
#define RPN_FLOW_CONTROL_XONXOFF_ON_OUTPUT 0x02
#define RPN_FLOW_CONTROL_RTR_ON_INPUT      0x04
#define RPN_FLOW_CONTROL_RTR_ON_OUTPUT     0x08
#define RPN_FLOW_CONTROL_RTC_ON_INPUT      0x10
#define RPN_FLOW_CONTROL_RTC_ON_OUTPUT     0x20

#define RPN_PARAM_MASK_0_BAUD             0x01
#define RPN_PARAM_MASK_0_DATA_BITS        0x02
#define RPN_PARAM_MASK_0_STOP_BITS        0x04
#define RPN_PARAM_MASK_0_PARITY           0x08
#define RPN_PARAM_MASK_0_PARITY_TYPE      0x10
#define RPN_PARAM_MASK_0_XON_CHAR         0x20
#define RPN_PARAM_MASK_0_XOFF_CHAR        0x40
#define RPN_PARAM_MASK_0_RESERVED         0x80

// @note: values are identical to rpn_flow_control_t
#define RPN_PARAM_MASK_1_XONOFF_ON_INPUT  0x01
#define RPN_PARAM_MASK_1_XONOFF_ON_OUTPUT 0x02
#define RPN_PARAM_MASK_1_RTR_ON_INPUT     0x04
#define RPN_PARAM_MASK_1_RTR_ON_OUTPUT    0x08
#define RPN_PARAM_MASK_1_RTC_ON_INPUT     0x10
#define RPN_PARAM_MASK_1_RTC_ON_OUTPUT    0x20
#define RPN_PARAM_MASK_1_RESERVED_0       0x40
#define RPN_PARAM_MASK_1_RESERVED_1       0x80

/**
 * BNEP Protocol
 */

#ifndef ETHER_ADDR_LEN
#define ETHER_ADDR_LEN 6
#endif

#ifndef ETHERTYPE_VLAN
#define ETHERTYPE_VLAN                                  0x8100 /* IEEE 802.1Q VLAN tag */
#endif

#define BNEP_MTU_MIN                                    1691


/**
 * PAN Profile
 */

typedef enum {
    BNEP_SECURITY_NONE = 0x0000,
    BNEP_SECURITY_SERVICE_LEVEL_ENFORCED,
    BNEP_SECURITY_802_1X
} security_description_t;

typedef enum {
    PAN_NET_ACCESS_TYPE_PSTN = 0x0000,
    PAN_NET_ACCESS_TYPE_ISDN,
    PAN_NET_ACCESS_TYPE_DSL,
    PAN_NET_ACCESS_TYPE_CABLE_MODEM,
    PAN_NET_ACCESS_TYPE_10MB_ETHERNET,
    PAN_NET_ACCESS_TYPE_100MB_ETHERNET,
    PAN_NET_ACCESS_TYPE_4MB_TOKEN_RING,
    PAN_NET_ACCESS_TYPE_16MB_TOKEN_RING,
    PAN_NET_ACCESS_TYPE_100MB_TOKEN_RING,
    PAN_NET_ACCESS_TYPE_FDDI,
    PAN_NET_ACCESS_TYPE_GSM,
    PAN_NET_ACCESS_TYPE_CDMA,
    PAN_NET_ACCESS_TYPE_GPRS,
    PAN_NET_ACCESS_TYPE_3G,
    PAN_NET_ACCESS_TYPE_CELULAR,
    PAN_NET_ACCESS_TYPE_OTHER = 0xFFFE,
    PAN_NET_ACCESS_TYPE_NONE
} net_access_type_t;

/**
 * ATT
 */

// Minimum/default MTU
#define ATT_DEFAULT_MTU               23

// MARK: ATT Error Codes
#define ATT_ERROR_SUCCESS                          0x00
#define ATT_ERROR_INVALID_HANDLE                   0x01
#define ATT_ERROR_READ_NOT_PERMITTED               0x02
#define ATT_ERROR_WRITE_NOT_PERMITTED              0x03
#define ATT_ERROR_INVALID_PDU                      0x04
#define ATT_ERROR_INSUFFICIENT_AUTHENTICATION      0x05
#define ATT_ERROR_REQUEST_NOT_SUPPORTED            0x06
#define ATT_ERROR_INVALID_OFFSET                   0x07
#define ATT_ERROR_INSUFFICIENT_AUTHORIZATION       0x08
#define ATT_ERROR_PREPARE_QUEUE_FULL               0x09
#define ATT_ERROR_ATTRIBUTE_NOT_FOUND              0x0a
#define ATT_ERROR_ATTRIBUTE_NOT_LONG               0x0b
#define ATT_ERROR_INSUFFICIENT_ENCRYPTION_KEY_SIZE 0x0c
#define ATT_ERROR_INVALID_ATTRIBUTE_VALUE_LENGTH   0x0d
#define ATT_ERROR_UNLIKELY_ERROR                   0x0e
#define ATT_ERROR_INSUFFICIENT_ENCRYPTION          0x0f
#define ATT_ERROR_UNSUPPORTED_GROUP_TYPE           0x10
#define ATT_ERROR_INSUFFICIENT_RESOURCES           0x11
#define ATT_ERROR_VALUE_NOT_ALLOWED                0x13

// MARK: ATT Error Codes defined by BTstack
#define ATT_ERROR_HCI_DISCONNECT_RECEIVED          0x1f
#define ATT_ERROR_BONDING_INFORMATION_MISSING      0x70
#define ATT_ERROR_DATA_MISMATCH                    0x7e
#define ATT_ERROR_TIMEOUT                          0x7F
#define ATT_ERROR_WRITE_RESPONSE_PENDING           0x100

// MARK: ATT Error Codes from Cycling Power Service spec
#define CYCLING_POWER_ERROR_CODE_INAPPROPRIATE_CONNECTION_PARAMETERS                          0x80
#define CYCLING_POWER_ERROR_CODE_PROCEDURE_ALREADY_IN_PROGRESS                                0xFE
#define CYCLING_POWER_ERROR_CODE_CCC_DESCRIPTOR_IMPROPERLY_CONFIGURED                         0xFD

// MARK: ATT Error Codes from Cycling Speed and Cadence Service spec
#define CYCLING_SPEED_AND_CADENCE_ERROR_CODE_PROCEDURE_ALREADY_IN_PROGRESS                    0x80
#define CYCLING_SPEED_AND_CADENCE_ERROR_CODE_CCC_DESCRIPTOR_IMPROPERLY_CONFIGURED             0x81


// MARK: Attribute Property Flags
#define ATT_PROPERTY_BROADCAST           0x01
#define ATT_PROPERTY_READ                0x02
#define ATT_PROPERTY_WRITE_WITHOUT_RESPONSE 0x04
#define ATT_PROPERTY_WRITE               0x08
#define ATT_PROPERTY_NOTIFY              0x10
#define ATT_PROPERTY_INDICATE            0x20
#define ATT_PROPERTY_AUTHENTICATED_SIGNED_WRITE 0x40
#define ATT_PROPERTY_EXTENDED_PROPERTIES 0x80

// MARK: Attribute Property Flag, BTstack extension
// value is asked from client
#define ATT_PROPERTY_DYNAMIC             0x100

// Security levels
#define ATT_SECURITY_NONE 0
#define ATT_SECURITY_ENCRYPTED 1
#define ATT_SECURITY_AUTHENTICATED 2
#define ATT_SECURITY_AUTHORIZED 3
#define ATT_SECURITY_AUTHENTICATED_SC 4

// ATT Transaction Timeout of 30 seconds for Command/Response or Indication/Confirmation
#define ATT_TRANSACTION_TIMEOUT_MS     30000

#define ATT_TRANSACTION_MODE_NONE      0x0
#define ATT_TRANSACTION_MODE_ACTIVE    0x1
#define ATT_TRANSACTION_MODE_EXECUTE   0x2
#define ATT_TRANSACTION_MODE_CANCEL    0x3
#define ATT_TRANSACTION_MODE_VALIDATE  0x4

// MARK: GATT UUIDs
#define GATT_PRIMARY_SERVICE_UUID                   0x2800
#define GATT_SECONDARY_SERVICE_UUID                 0x2801
#define GATT_INCLUDE_SERVICE_UUID                   0x2802
#define GATT_CHARACTERISTICS_UUID                   0x2803
#define GATT_CHARACTERISTIC_EXTENDED_PROPERTIES     0x2900
#define GATT_CHARACTERISTIC_USER_DESCRIPTION        0x2901
#define GATT_CLIENT_CHARACTERISTICS_CONFIGURATION   0x2902
#define GATT_SERVER_CHARACTERISTICS_CONFIGURATION   0x2903
#define GATT_CHARACTERISTIC_PRESENTATION_FORMAT     0x2904
#define GATT_CHARACTERISTIC_AGGREGATE_FORMAT        0x2905

#define GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NONE          0
#define GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NOTIFICATION  1
#define GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_INDICATION    2

#define GATT_CLIENT_ANY_CONNECTION      0xffff
#define GATT_CLIENT_ANY_VALUE_HANDLE    0x0000

// GAP Service and Characteristics
#define GAP_SERVICE_UUID               0x1800
#define GAP_DEVICE_NAME_UUID           0x2a00
#define GAP_APPEARANCE_UUID            0x2a01
#define GAP_PERIPHERAL_PRIVACY_FLAG    0x2a02
#define GAP_RECONNECTION_ADDRESS_UUID  0x2a03
#define GAP_PERIPHERAL_PREFERRED_CONNECTION_PARAMETERS_UUID 0x2a04
#define GAP_SERVICE_CHANGED            0x2a05

// Bluetooth GATT types

typedef struct {
    uint16_t year;      // 0 - year  is not known; or [1582,9999]
    uint8_t  month;     // 0 - month is not known; or [1,12]
    uint8_t  day;       // 0 - day   is not known; or [1,31]
    uint8_t  hours;     // [0,23]
    uint8_t  minutes;   // [0,59]
    uint8_t  seconds;   // [0,59]
} gatt_date_time_t;

typedef enum {
    GATT_MICROPHONE_CONTROL_MUTE_OFF = 0x00,
    GATT_MICROPHONE_CONTROL_MUTE_ON,
    GATT_MICROPHONE_CONTROL_MUTE_DISABLED
} gatt_microphone_control_mute_t;

/**
 * SM - LE Security Manager
 */
// Bluetooth Spec definitions
typedef enum {
    SM_CODE_PAIRING_REQUEST = 0X01,
    SM_CODE_PAIRING_RESPONSE,
    SM_CODE_PAIRING_CONFIRM,
    SM_CODE_PAIRING_RANDOM,
    SM_CODE_PAIRING_FAILED,
    SM_CODE_ENCRYPTION_INFORMATION,
    SM_CODE_MASTER_IDENTIFICATION,
    SM_CODE_IDENTITY_INFORMATION,
    SM_CODE_IDENTITY_ADDRESS_INFORMATION,
    SM_CODE_SIGNING_INFORMATION,
    SM_CODE_SECURITY_REQUEST,
    SM_CODE_PAIRING_PUBLIC_KEY,
    SM_CODE_PAIRING_DHKEY_CHECK,
    SM_CODE_KEYPRESS_NOTIFICATION,
} SECURITY_MANAGER_COMMANDS;

// IO Capability Values
typedef enum {
    IO_CAPABILITY_DISPLAY_ONLY = 0,
    IO_CAPABILITY_DISPLAY_YES_NO,
    IO_CAPABILITY_KEYBOARD_ONLY,
    IO_CAPABILITY_NO_INPUT_NO_OUTPUT,
    IO_CAPABILITY_KEYBOARD_DISPLAY, // not used by secure simple pairing
} io_capability_t;

// Authentication requirement flags
#define SM_AUTHREQ_NO_BONDING        0x00
#define SM_AUTHREQ_BONDING           0x01
#define SM_AUTHREQ_MITM_PROTECTION   0x04
#define SM_AUTHREQ_SECURE_CONNECTION 0x08
#define SM_AUTHREQ_KEYPRESS          0x10
#define SM_AUTHREQ_CT2               0x20

// Key distribution flags used by spec
#define SM_KEYDIST_ENC_KEY  0x01
#define SM_KEYDIST_ID_KEY   0x02
#define SM_KEYDIST_SIGN     0x04
#define SM_KEYDIST_LINK_KEY 0x08

// Key distribution flags used internally
#define SM_KEYDIST_FLAG_ENCRYPTION_INFORMATION       0x01
#define SM_KEYDIST_FLAG_MASTER_IDENTIFICATION        0x02
#define SM_KEYDIST_FLAG_IDENTITY_INFORMATION         0x04
#define SM_KEYDIST_FLAG_IDENTITY_ADDRESS_INFORMATION 0x08
#define SM_KEYDIST_FLAG_SIGNING_IDENTIFICATION       0x10

// STK Generation Methods
#define SM_STK_GENERATION_METHOD_JUST_WORKS          0x01
#define SM_STK_GENERATION_METHOD_OOB                 0x02
#define SM_STK_GENERATION_METHOD_PASSKEY             0x04
#define SM_STK_GENERATION_METHOD_NUMERIC_COMPARISON  0x08

// Pairing Failed Reasons
#define SM_REASON_RESERVED                     0x00
#define SM_REASON_PASSKEY_ENTRY_FAILED         0x01
#define SM_REASON_OOB_NOT_AVAILABLE            0x02
#define SM_REASON_AUTHENTHICATION_REQUIREMENTS 0x03
#define SM_REASON_CONFIRM_VALUE_FAILED         0x04
#define SM_REASON_PAIRING_NOT_SUPPORTED        0x05
#define SM_REASON_ENCRYPTION_KEY_SIZE          0x06
#define SM_REASON_COMMAND_NOT_SUPPORTED        0x07
#define SM_REASON_UNSPECIFIED_REASON           0x08
#define SM_REASON_REPEATED_ATTEMPTS            0x09
#define SM_REASON_INVALID_PARAMETERS           0x0a
#define SM_REASON_DHKEY_CHECK_FAILED           0x0b
#define SM_REASON_NUMERIC_COMPARISON_FAILED    0x0c
#define SM_REASON_BR_EDR_PAIRING_IN_PROGRESS   0x0d
#define SM_REASON_CROSS_TRANSPORT_KEY_DERIVATION_NOT_ALLOWED 0x0e
#define SM_REASON_KEY_REJECTED                 0x0f

// also, invalid parameters
// and reserved

// Keypress Notifications
#define SM_KEYPRESS_PASSKEY_ENTRY_STARTED      0x00
#define SM_KEYPRESS_PASSKEY_DIGIT_ENTERED      0x01
#define SM_KEYPRESS_PASSKEY_DIGIT_ERASED       0x02
#define SM_KEYPRESS_PASSKEY_CLEARED            0x03
#define SM_KEYPRESS_PASSKEY_ENTRY_COMPLETED    0x04


#endif