xref: /btstack/src/ble/gatt_client.h (revision 046b44372d25c7bd6fe78e5cf6e5176a1979f437)
1 /*
2  * Copyright (C) 2014 BlueKitchen GmbH
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holders nor the names of
14  *    contributors may be used to endorse or promote products derived
15  *    from this software without specific prior written permission.
16  * 4. Any redistribution, use, or modification is done solely for
17  *    personal benefit and not for any commercial purpose or for
18  *    monetary gain.
19  *
20  * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
23  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
24  * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
26  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
27  * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
28  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
30  * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  * Please inquire about commercial licensing options at
34  * [email protected]
35  *
36  */
37 
38 
39 #ifndef btstack_gatt_client_h
40 #define btstack_gatt_client_h
41 
42 #include "hci.h"
43 
44 #if defined __cplusplus
45 extern "C" {
46 #endif
47 
48 typedef enum {
49     P_READY,
50     P_W2_SEND_SERVICE_QUERY,
51     P_W4_SERVICE_QUERY_RESULT,
52     P_W2_SEND_SERVICE_WITH_UUID_QUERY,
53     P_W4_SERVICE_WITH_UUID_RESULT,
54 
55     P_W2_SEND_ALL_CHARACTERISTICS_OF_SERVICE_QUERY,
56     P_W4_ALL_CHARACTERISTICS_OF_SERVICE_QUERY_RESULT,
57     P_W2_SEND_CHARACTERISTIC_WITH_UUID_QUERY,
58     P_W4_CHARACTERISTIC_WITH_UUID_QUERY_RESULT,
59 
60     P_W2_SEND_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY,
61     P_W4_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT,
62 
63     P_W2_SEND_INCLUDED_SERVICE_QUERY,
64     P_W4_INCLUDED_SERVICE_QUERY_RESULT,
65     P_W2_SEND_INCLUDED_SERVICE_WITH_UUID_QUERY,
66     P_W4_INCLUDED_SERVICE_UUID_WITH_QUERY_RESULT,
67 
68     P_W2_SEND_READ_CHARACTERISTIC_VALUE_QUERY,
69     P_W4_READ_CHARACTERISTIC_VALUE_RESULT,
70 
71     P_W2_SEND_READ_BLOB_QUERY,
72     P_W4_READ_BLOB_RESULT,
73 
74     P_W2_SEND_READ_BY_TYPE_REQUEST,
75     P_W4_READ_BY_TYPE_RESPONSE,
76 
77     P_W2_SEND_READ_MULTIPLE_REQUEST,
78     P_W4_READ_MULTIPLE_RESPONSE,
79 
80     P_W2_SEND_WRITE_CHARACTERISTIC_VALUE,
81     P_W4_WRITE_CHARACTERISTIC_VALUE_RESULT,
82 
83     P_W2_PREPARE_WRITE,
84     P_W4_PREPARE_WRITE_RESULT,
85     P_W2_PREPARE_RELIABLE_WRITE,
86     P_W4_PREPARE_RELIABLE_WRITE_RESULT,
87 
88     P_W2_EXECUTE_PREPARED_WRITE,
89     P_W4_EXECUTE_PREPARED_WRITE_RESULT,
90     P_W2_CANCEL_PREPARED_WRITE,
91     P_W4_CANCEL_PREPARED_WRITE_RESULT,
92     P_W2_CANCEL_PREPARED_WRITE_DATA_MISMATCH,
93     P_W4_CANCEL_PREPARED_WRITE_DATA_MISMATCH_RESULT,
94 
95 #ifdef ENABLE_GATT_FIND_INFORMATION_FOR_CCC_DISCOVERY
96     P_W2_SEND_FIND_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY,
97     P_W4_FIND_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY_RESULT,
98 #else
99     P_W2_SEND_READ_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY,
100     P_W4_READ_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY_RESULT,
101 #endif
102     P_W2_WRITE_CLIENT_CHARACTERISTIC_CONFIGURATION,
103     P_W4_CLIENT_CHARACTERISTIC_CONFIGURATION_RESULT,
104 
105     P_W2_SEND_READ_CHARACTERISTIC_DESCRIPTOR_QUERY,
106     P_W4_READ_CHARACTERISTIC_DESCRIPTOR_RESULT,
107 
108     P_W2_SEND_READ_BLOB_CHARACTERISTIC_DESCRIPTOR_QUERY,
109     P_W4_READ_BLOB_CHARACTERISTIC_DESCRIPTOR_RESULT,
110 
111     P_W2_SEND_WRITE_CHARACTERISTIC_DESCRIPTOR,
112     P_W4_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,
113 
114     // all long writes use this
115     P_W2_PREPARE_WRITE_CHARACTERISTIC_DESCRIPTOR,
116     P_W4_PREPARE_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,
117     P_W2_EXECUTE_PREPARED_WRITE_CHARACTERISTIC_DESCRIPTOR,
118     P_W4_EXECUTE_PREPARED_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,
119 
120     // gatt reliable write API use this (manual version of the above)
121     P_W2_PREPARE_WRITE_SINGLE,
122     P_W4_PREPARE_WRITE_SINGLE_RESULT,
123 
124     P_W4_IDENTITY_RESOLVING,
125     P_W4_CMAC_READY,
126     P_W4_CMAC_RESULT,
127     P_W2_SEND_SIGNED_WRITE,
128     P_W4_SEND_SINGED_WRITE_DONE,
129 } gatt_client_state_t;
130 
131 
132 typedef enum{
133     SEND_MTU_EXCHANGE,
134     SENT_MTU_EXCHANGE,
135     MTU_EXCHANGED,
136     MTU_AUTO_EXCHANGE_DISABLED
137 } gatt_client_mtu_t;
138 
139 typedef struct gatt_client{
140     btstack_linked_item_t    item;
141     // TODO: rename gatt_client_state -> state
142     gatt_client_state_t gatt_client_state;
143 
144     // user callback
145     btstack_packet_handler_t callback;
146 
147     // can write without response callback
148     btstack_packet_handler_t write_without_response_callback;
149 
150     hci_con_handle_t con_handle;
151 
152     uint8_t   address_type;
153     bd_addr_t address;
154 
155     uint16_t          mtu;
156     gatt_client_mtu_t mtu_state;
157 
158     uint16_t uuid16;
159     uint8_t  uuid128[16];
160 
161     uint16_t start_group_handle;
162     uint16_t end_group_handle;
163 
164     uint16_t query_start_handle;
165     uint16_t query_end_handle;
166 
167     uint8_t  characteristic_properties;
168     uint16_t characteristic_start_handle;
169 
170     uint16_t attribute_handle;
171     uint16_t attribute_offset;
172     uint16_t attribute_length;
173     uint8_t* attribute_value;
174 
175     // read multiple characteristic values
176     uint16_t    read_multiple_handle_count;
177     uint16_t  * read_multiple_handles;
178 
179     uint16_t client_characteristic_configuration_handle;
180     uint8_t  client_characteristic_configuration_value[2];
181 
182     uint8_t  filter_with_uuid;
183     uint8_t  send_confirmation;
184 
185     int      le_device_index;
186     uint8_t  cmac[8];
187 
188     btstack_timer_source_t gc_timeout;
189 
190 #ifdef ENABLE_GATT_CLIENT_PAIRING
191     uint8_t  security_counter;
192     uint8_t  wait_for_pairing_complete;
193     uint8_t  pending_error_code;
194 #endif
195 
196 } gatt_client_t;
197 
198 typedef struct gatt_client_notification {
199     btstack_linked_item_t    item;
200     btstack_packet_handler_t callback;
201     hci_con_handle_t con_handle;
202     uint16_t attribute_handle;
203 } gatt_client_notification_t;
204 
205 /* API_START */
206 
207 typedef struct {
208     uint16_t start_group_handle;
209     uint16_t end_group_handle;
210     uint16_t uuid16;
211     uint8_t  uuid128[16];
212 } gatt_client_service_t;
213 
214 typedef struct {
215     uint16_t start_handle;
216     uint16_t value_handle;
217     uint16_t end_handle;
218     uint16_t properties;
219     uint16_t uuid16;
220     uint8_t  uuid128[16];
221 } gatt_client_characteristic_t;
222 
223 typedef struct {
224     uint16_t handle;
225     uint16_t uuid16;
226     uint8_t  uuid128[16];
227 } gatt_client_characteristic_descriptor_t;
228 
229 /**
230  * @brief Set up GATT client.
231  */
232 void gatt_client_init(void);
233 
234 /**
235  * @brief MTU is available after the first query has completed. If status is equal to 0, it returns the real value, otherwise the default value of 23.
236  * @param con_handle
237  * @param mtu
238  */
239 
240 uint8_t gatt_client_get_mtu(hci_con_handle_t con_handle, uint16_t * mtu);
241 
242 /**
243  * @brief Sets whether a MTU Exchange Request shall be automatically send before the first attribute read request is send. Default is enabled.
244  * @param enabled
245  */
246 void gatt_client_mtu_enable_auto_negotiation(uint8_t enabled);
247 
248 /**
249 * @brief Sends a MTU Exchange Request, this allows for the client to exchange MTU when gatt_client_mtu_enable_auto_negotiation is disabled.
250  * @param callback
251  * @param con_handle
252  */
253 void gatt_client_send_mtu_negotiation(btstack_packet_handler_t callback, hci_con_handle_t con_handle);
254 
255 /**
256  * @brief Returns if the GATT client is ready to receive a query. It is used with daemon.
257  * @param con_handle
258  */
259 int gatt_client_is_ready(hci_con_handle_t con_handle);
260 
261 /**
262  * @brief Discovers all primary services. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
263  * @param callback
264  * @param con_handle
265  */
266 uint8_t gatt_client_discover_primary_services(btstack_packet_handler_t callback, hci_con_handle_t con_handle);
267 
268 /**
269  * @brief Discovers a specific primary service given its UUID. This service may exist multiple times. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
270  * @param callback
271  * @param con_handle
272  * @param uuid16
273  */
274 uint8_t gatt_client_discover_primary_services_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t uuid16);
275 
276 /**
277  * @brief Discovers a specific primary service given its UUID. This service may exist multiple times. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
278  * @param callback
279  * @param con_handle
280  * @param uuid128
281  */
282 uint8_t gatt_client_discover_primary_services_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, const uint8_t  * uuid128);
283 
284 /**
285  * @brief Finds included services within the specified service. For each found included service, an le_service_event_t with type set to GATT_EVENT_INCLUDED_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery. Information about included service type (primary/secondary) can be retrieved either by sending an ATT find information request for the returned start group handle (returning the handle and the UUID for primary or secondary service) or by comparing the service to the list of all primary services.
286  * @param callback
287  * @param con_handle
288  * @param service
289  */
290 uint8_t gatt_client_find_included_services_for_service(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service);
291 
292 /**
293  * @brief Discovers all characteristics within the specified service. For each found characteristic, an le_characteristics_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
294  * @param callback
295  * @param con_handle
296  * @param service
297  */
298 uint8_t gatt_client_discover_characteristics_for_service(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service);
299 
300 /**
301  * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
302  * @param callback
303  * @param con_handle
304  * @param start_handle
305  * @param end_handle
306  * @param uuid16
307  */
308 uint8_t gatt_client_discover_characteristics_for_handle_range_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint16_t uuid16);
309 
310 /**
311  * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
312  * @param callback
313  * @param con_handle
314  * @param start_handle
315  * @param end_handle
316  * @param uuid128
317  */
318 uint8_t gatt_client_discover_characteristics_for_handle_range_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint8_t  * uuid128);
319 
320 /**
321  * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
322  * @param callback
323  * @param con_handle
324  * @param service
325  * @param uuid16
326  */
327 uint8_t gatt_client_discover_characteristics_for_service_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service, uint16_t  uuid16);
328 
329 /**
330  * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
331  * @param callback
332  * @param con_handle
333  * @param service
334  * @param uuid128
335  */
336 uint8_t gatt_client_discover_characteristics_for_service_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service, uint8_t  * uuid128);
337 
338 /**
339  * @brief Discovers attribute handle and UUID of a characteristic descriptor within the specified characteristic. For each found descriptor, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
340  * @param callback
341  * @param con_handle
342  * @param characteristic
343  */
344 uint8_t gatt_client_discover_characteristic_descriptors(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);
345 
346 /**
347  * @brief Reads the characteristic value using the characteristic's value handle. If the characteristic value is found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
348  * @param callback
349  * @param con_handle
350  * @param characteristic
351  */
352 uint8_t gatt_client_read_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);
353 
354 /**
355  * @brief Reads the characteristic value using the characteristic's value handle. If the characteristic value is found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
356  * @param callback
357  * @param con_handle
358  * @param characteristic_value_handle
359  */
360 uint8_t gatt_client_read_value_of_characteristic_using_value_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle);
361 
362 /**
363  * @brief Reads the characteric value of all characteristics with the uuid. For each found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
364  * @param callback
365  * @param con_handle
366  * @param start_handle
367  * @param end_handle
368  * @param uuid16
369  */
370 uint8_t gatt_client_read_value_of_characteristics_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint16_t uuid16);
371 
372 /**
373  * @brief Reads the characteric value of all characteristics with the uuid. For each found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
374  * @param callback
375  * @param con_handle
376  * @param start_handle
377  * @param end_handle
378  * @param uuid128
379  */
380 uint8_t gatt_client_read_value_of_characteristics_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint8_t * uuid128);
381 
382 /**
383  * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
384  * @param callback
385  * @param con_handle
386  * @param characteristic
387  */
388 uint8_t gatt_client_read_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);
389 
390 /**
391  * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
392  * @param callback
393  * @param con_handle
394  * @param characteristic_value_handle
395  */
396 uint8_t gatt_client_read_long_value_of_characteristic_using_value_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle);
397 
398 /**
399  * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
400  * @param callback
401  * @param con_handle
402  * @param characteristic_value_handle
403  * @param offset
404  */
405 uint8_t gatt_client_read_long_value_of_characteristic_using_value_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t offset);
406 
407 /*
408  * @brief Read multiple characteristic values
409  * @param callback
410  * @param con_handle
411  * @param num_value_handles
412  * @param value_handles list of handles
413  */
414 uint8_t gatt_client_read_multiple_characteristic_values(btstack_packet_handler_t callback, hci_con_handle_t con_handle, int num_value_handles, uint16_t * value_handles);
415 
416 /**
417  * @brief Writes the characteristic value using the characteristic's value handle without an acknowledgment that the write was successfully performed.
418  * @param con_handle
419  * @param characteristic_value_handle
420  * @param length of data
421  * @param data is not copied, make sure memory is accessible until write is done
422  */
423 uint8_t gatt_client_write_value_of_characteristic_without_response(hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);
424 
425 /**
426  * @brief Writes the authenticated characteristic value using the characteristic's value handle without an acknowledgment that the write was successfully performed.
427  * @note GATT_EVENT_QUERY_COMPLETE is emitted with 0 for success or ATT_ERROR_BONDING_INFORMATION_MISSING if there is no bonding information stored
428  * @param callback
429  * @param con_handle
430  * @param value_handle
431  * @param message_len
432  * @param message is not copied, make sure memory is accessible until write is done
433  */
434 uint8_t gatt_client_signed_write_without_response(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t value_handle, uint16_t message_len, uint8_t  * message);
435 
436 /**
437  * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
438  * @param callback
439  * @param con_handle
440  * @param characteristic_value_handle
441  * @param length of data
442  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
443  */
444 uint8_t gatt_client_write_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);
445 
446 /**
447  * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
448  * @param callback
449  * @param con_handle
450  * @param characteristic_value_handle
451  * @param length of data
452  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
453  */
454 uint8_t gatt_client_write_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);
455 
456 /**
457  * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
458  * @param callback
459  * @param con_handle
460  * @param characteristic_value_handle
461  * @param offset of value
462  * @param length of data
463  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
464  */
465 uint8_t gatt_client_write_long_value_of_characteristic_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t offset, uint16_t length, uint8_t  * data);
466 
467 /**
468  * @brief Writes of the long characteristic value using the characteristic's value handle. It uses server response to validate that the write was correctly received. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE marks the end of write. The write is successfully performed, if the event's status field is set to 0.
469  * @param callback
470  * @param con_handle
471  * @param characteristic_value_handle
472  * @param length of data
473  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
474  */
475 uint8_t gatt_client_reliable_write_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);
476 
477 /**
478  * @brief Reads the characteristic descriptor using its handle. If the characteristic descriptor is found, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
479  * @param callback
480  * @param con_handle
481  * @param descriptor
482  */
483 uint8_t gatt_client_read_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor);
484 
485 /**
486  * @brief Reads the characteristic descriptor using its handle. If the characteristic descriptor is found, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
487  * @param callback
488  * @param con_handle
489  * @param descriptor
490  */
491 uint8_t gatt_client_read_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle);
492 
493 /**
494  * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
495  * @param callback
496  * @param con_handle
497  * @param descriptor_handle
498  */
499 uint8_t gatt_client_read_long_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor);
500 
501 /**
502  * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
503  * @param callback
504  * @param con_handle
505  * @param descriptor_handle
506  */
507 uint8_t gatt_client_read_long_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle);
508 
509 /**
510  * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
511  * @param callback
512  * @param con_handle
513  * @param descriptor_handle
514  * @param offset
515  */
516 uint8_t gatt_client_read_long_characteristic_descriptor_using_descriptor_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t offset);
517 
518 /**
519  * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
520  * @param callback
521  * @param con_handle
522  * @param descriptor
523  * @param length of data
524  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
525  */
526 uint8_t gatt_client_write_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor, uint16_t length, uint8_t  * data);
527 
528 /**
529  * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
530  * @param callback
531  * @param con_handle
532  * @param descriptor_handle
533  * @param length of data
534  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
535  */
536 uint8_t gatt_client_write_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t length, uint8_t  * data);
537 
538 /**
539  * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
540  * @param callback
541  * @param con_handle
542  * @param descriptor
543  * @param length of data
544  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
545  */
546 uint8_t gatt_client_write_long_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor, uint16_t length, uint8_t  * data);
547 
548 /**
549  * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
550  * @param callback
551  * @param con_handle
552  * @param descriptor_handle
553  * @param length of data
554  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
555  */
556 uint8_t gatt_client_write_long_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t length, uint8_t  * data);
557 
558 /**
559  * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's status field is set to 0.
560  * @param callback
561  * @param con_handle
562  * @param descriptor_handle
563  * @param offset of value
564  * @param length of data
565  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
566  */
567 uint8_t gatt_client_write_long_characteristic_descriptor_using_descriptor_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t offset, uint16_t length, uint8_t  * data);
568 
569 /**
570  * @brief Writes the client characteristic configuration of the specified characteristic. It is used to subscribe for notifications or indications of the characteristic value. For notifications or indications specify: GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NOTIFICATION resp. GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_INDICATION as configuration value.
571  * @param callback
572  * @param con_handle
573  * @param characteristic
574  * @param configuration
575  */
576 uint8_t gatt_client_write_client_characteristic_configuration(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t * characteristic, uint16_t configuration);
577 
578 /**
579  * @brief Register for notifications and indications of a characteristic enabled by gatt_client_write_client_characteristic_configuration
580  * @param notification struct used to store registration
581  * @param callback
582  * @param con_handle
583  * @param characteristic
584  */
585 void gatt_client_listen_for_characteristic_value_updates(gatt_client_notification_t * notification, btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t * characteristic);
586 
587 /**
588  * @brief Stop listening to characteristic value updates registered with gatt_client_listen_for_characteristic_value_updates
589  * @param notification struct used in gatt_client_listen_for_characteristic_value_updates
590  */
591 void gatt_client_stop_listening_for_characteristic_value_updates(gatt_client_notification_t * notification);
592 
593 /**
594  * @brief Requests GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE that guarantees a single successful gatt_client_write_value_of_characteristic_without_response
595  * @param callback
596  * @param con_handle
597  * @returns status
598  */
599 uint8_t gatt_client_request_can_write_without_response_event(btstack_packet_handler_t callback, hci_con_handle_t con_handle);
600 
601 /**
602  * @brief Transactional write. It can be called as many times as it is needed to write the characteristics within the same transaction. Call gatt_client_execute_write to commit the transaction.
603  * @param callback
604  * @param con_handle
605  * @param attribute_handle
606  * @param offset of value
607  * @param length of data
608  * @param data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
609  */
610 uint8_t gatt_client_prepare_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t attribute_handle, uint16_t offset, uint16_t length, uint8_t * data);
611 
612 /**
613  * @brief Commit transactional write. GATT_EVENT_QUERY_COMPLETE is received.
614  * @param callback
615  * @param con_handle
616  */
617 uint8_t gatt_client_execute_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle);
618 
619 /**
620  * @brief Abort transactional write. GATT_EVENT_QUERY_COMPLETE is received.
621  * @param callback
622  * @param con_handle
623  */
624 uint8_t gatt_client_cancel_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle);
625 
626 /* API_END */
627 
628 // used by generated btstack_event.c
629 
630 void gatt_client_deserialize_service(const uint8_t *packet, int offset, gatt_client_service_t *service);
631 void gatt_client_deserialize_characteristic(const uint8_t * packet, int offset, gatt_client_characteristic_t * characteristic);
632 void gatt_client_deserialize_characteristic_descriptor(const uint8_t * packet, int offset, gatt_client_characteristic_descriptor_t * descriptor);
633 
634 #if defined __cplusplus
635 }
636 #endif
637 
638 #endif
639