xref: /btstack/src/ble/gatt_client.h (revision b11289a818ce028834ee64a47e56158393b2e34e)

/*
 * Copyright (C) 2014 BlueKitchen GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 4. Any redistribution, use, or modification is done solely for
 *    personal benefit and not for any commercial purpose or for
 *    monetary gain.
 *
 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Please inquire about commercial licensing options at
 * [email protected]
 *
 */


#ifndef btstack_gatt_client_h
#define btstack_gatt_client_h

#include "hci.h"

#if defined __cplusplus
extern "C" {
#endif

typedef enum {
    P_READY,
    P_W2_SEND_SERVICE_QUERY,
    P_W4_SERVICE_QUERY_RESULT,
    P_W2_SEND_SERVICE_WITH_UUID_QUERY,
    P_W4_SERVICE_WITH_UUID_RESULT,

    P_W2_SEND_ALL_CHARACTERISTICS_OF_SERVICE_QUERY,
    P_W4_ALL_CHARACTERISTICS_OF_SERVICE_QUERY_RESULT,
    P_W2_SEND_CHARACTERISTIC_WITH_UUID_QUERY,
    P_W4_CHARACTERISTIC_WITH_UUID_QUERY_RESULT,

    P_W2_SEND_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY,
    P_W4_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT,

    P_W2_SEND_INCLUDED_SERVICE_QUERY,
    P_W4_INCLUDED_SERVICE_QUERY_RESULT,
    P_W2_SEND_INCLUDED_SERVICE_WITH_UUID_QUERY,
    P_W4_INCLUDED_SERVICE_UUID_WITH_QUERY_RESULT,

    P_W2_SEND_READ_CHARACTERISTIC_VALUE_QUERY,
    P_W4_READ_CHARACTERISTIC_VALUE_RESULT,

    P_W2_SEND_READ_BLOB_QUERY,
    P_W4_READ_BLOB_RESULT,

    P_W2_SEND_READ_BY_TYPE_REQUEST,
    P_W4_READ_BY_TYPE_RESPONSE,

    P_W2_SEND_READ_MULTIPLE_REQUEST,
    P_W4_READ_MULTIPLE_RESPONSE,

    P_W2_SEND_WRITE_CHARACTERISTIC_VALUE,
    P_W4_WRITE_CHARACTERISTIC_VALUE_RESULT,

    P_W2_PREPARE_WRITE,
    P_W4_PREPARE_WRITE_RESULT,
    P_W2_PREPARE_RELIABLE_WRITE,
    P_W4_PREPARE_RELIABLE_WRITE_RESULT,

    P_W2_EXECUTE_PREPARED_WRITE,
    P_W4_EXECUTE_PREPARED_WRITE_RESULT,
    P_W2_CANCEL_PREPARED_WRITE,
    P_W4_CANCEL_PREPARED_WRITE_RESULT,
    P_W2_CANCEL_PREPARED_WRITE_DATA_MISMATCH,
    P_W4_CANCEL_PREPARED_WRITE_DATA_MISMATCH_RESULT,

#ifdef ENABLE_GATT_FIND_INFORMATION_FOR_CCC_DISCOVERY
    P_W2_SEND_FIND_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY,
    P_W4_FIND_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY_RESULT,
#else
    P_W2_SEND_READ_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY,
    P_W4_READ_CLIENT_CHARACTERISTIC_CONFIGURATION_QUERY_RESULT,
#endif
    P_W2_WRITE_CLIENT_CHARACTERISTIC_CONFIGURATION,
    P_W4_CLIENT_CHARACTERISTIC_CONFIGURATION_RESULT,

    P_W2_SEND_READ_CHARACTERISTIC_DESCRIPTOR_QUERY,
    P_W4_READ_CHARACTERISTIC_DESCRIPTOR_RESULT,

    P_W2_SEND_READ_BLOB_CHARACTERISTIC_DESCRIPTOR_QUERY,
    P_W4_READ_BLOB_CHARACTERISTIC_DESCRIPTOR_RESULT,

    P_W2_SEND_WRITE_CHARACTERISTIC_DESCRIPTOR,
    P_W4_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,

    // all long writes use this
    P_W2_PREPARE_WRITE_CHARACTERISTIC_DESCRIPTOR,
    P_W4_PREPARE_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,
    P_W2_EXECUTE_PREPARED_WRITE_CHARACTERISTIC_DESCRIPTOR,
    P_W4_EXECUTE_PREPARED_WRITE_CHARACTERISTIC_DESCRIPTOR_RESULT,

    // gatt reliable write API use this (manual version of the above)
    P_W2_PREPARE_WRITE_SINGLE,
    P_W4_PREPARE_WRITE_SINGLE_RESULT,

    P_W4_IDENTITY_RESOLVING,
    P_W4_CMAC_READY,
    P_W4_CMAC_RESULT,
    P_W2_SEND_SIGNED_WRITE,
    P_W4_SEND_SINGED_WRITE_DONE,
} gatt_client_state_t;


typedef enum{
    SEND_MTU_EXCHANGE,
    SENT_MTU_EXCHANGE,
    MTU_EXCHANGED,
    MTU_AUTO_EXCHANGE_DISABLED
} gatt_client_mtu_t;

typedef struct gatt_client{
    btstack_linked_item_t    item;
    // TODO: rename gatt_client_state -> state
    gatt_client_state_t gatt_client_state;

    // user callback
    btstack_packet_handler_t callback;

    // can write without response callback
    btstack_packet_handler_t write_without_response_callback;

    hci_con_handle_t con_handle;

    uint16_t          mtu;
    gatt_client_mtu_t mtu_state;

    uint16_t uuid16;
    uint8_t  uuid128[16];

    uint16_t start_group_handle;
    uint16_t end_group_handle;

    uint16_t query_start_handle;
    uint16_t query_end_handle;

    uint8_t  characteristic_properties;
    uint16_t characteristic_start_handle;

    uint16_t attribute_handle;
    uint16_t attribute_offset;
    uint16_t attribute_length;
    uint8_t* attribute_value;

    // read multiple characteristic values
    uint16_t    read_multiple_handle_count;
    uint16_t  * read_multiple_handles;

    uint16_t client_characteristic_configuration_handle;
    uint8_t  client_characteristic_configuration_value[2];

    uint8_t  filter_with_uuid;
    uint8_t  send_confirmation;

    int      le_device_index;
    uint8_t  cmac[8];

    btstack_timer_source_t gc_timeout;

    uint8_t  security_counter;
    uint8_t  wait_for_authentication_complete;
    uint8_t  pending_error_code;

    bool     reencryption_active;
    uint8_t  reencryption_result;

    gap_security_level_t security_level;

} gatt_client_t;

typedef struct gatt_client_notification {
    btstack_linked_item_t    item;
    btstack_packet_handler_t callback;
    hci_con_handle_t con_handle;
    uint16_t attribute_handle;
} gatt_client_notification_t;

/* API_START */

typedef struct {
    uint16_t start_group_handle;
    uint16_t end_group_handle;
    uint16_t uuid16;
    uint8_t  uuid128[16];
} gatt_client_service_t;

typedef struct {
    uint16_t start_handle;
    uint16_t value_handle;
    uint16_t end_handle;
    uint16_t properties;
    uint16_t uuid16;
    uint8_t  uuid128[16];
} gatt_client_characteristic_t;

typedef struct {
    uint16_t handle;
    uint16_t uuid16;
    uint8_t  uuid128[16];
} gatt_client_characteristic_descriptor_t;

/**
 * @brief Set up GATT client.
 */
void gatt_client_init(void);

/**
 * @brief Set minimum required security level for GATT Client
 * @note  The Bluetooth specification makes the GATT Server responsible to check for security.
 *        This allows an attacker to spoof an existing device with a GATT Servers, but skip the authentication part.
 *        If your application is exchanging sensitive data with a remote device, you would need to manually check
 *        the security level before sending/receive such data.
 *        With level > 0, the GATT Client triggers authentication for all GATT Requests and defers any exchange
 *        until the required security level is established.
 *        gatt_client_request_can_write_without_response_event does not trigger authentication
 *  @pram level, default LEVEL_0 (no encryption required)
 */
void gatt_client_set_required_security_level(gap_security_level_t level);

/**
 * @brief MTU is available after the first query has completed. If status is equal to ERROR_CODE_SUCCESS, it returns the real value, otherwise the default value ATT_DEFAULT_MTU (see bluetooth.h).
 * @param  con_handle
 * @param  mtu
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if MTU is not exchanged and MTU auto-exchange is disabled
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_get_mtu(hci_con_handle_t con_handle, uint16_t * mtu);

/**
 * @brief Sets whether a MTU Exchange Request shall be automatically send before the first attribute read request is send. Default is enabled.
 * @param enabled
 */
void gatt_client_mtu_enable_auto_negotiation(uint8_t enabled);

/**
* @brief Sends a MTU Exchange Request, this allows for the client to exchange MTU when gatt_client_mtu_enable_auto_negotiation is disabled.
 * @param  callback
 * @param  con_handle
 */
void gatt_client_send_mtu_negotiation(btstack_packet_handler_t callback, hci_con_handle_t con_handle);

/**
 * @brief Returns if the GATT client is ready to receive a query. It is used with daemon.
 * @param  con_handle
 * @return is_ready_status     0 - if no GATT client for con_handle is found, or is not ready, otherwise 1
 */
int gatt_client_is_ready(hci_con_handle_t con_handle);

/**
 * @brief Discovers all primary services. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_primary_services(btstack_packet_handler_t callback, hci_con_handle_t con_handle);

/**
 * @brief Discovers a specific primary service given its UUID. This service may exist multiple times. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param callback
 * @param con_handle
 * @param uuid16
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_primary_services_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t uuid16);

/**
 * @brief Discovers a specific primary service given its UUID. This service may exist multiple times. For each found service, an le_service_event_t with type set to GATT_EVENT_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t, with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  uuid128
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_primary_services_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, const uint8_t  * uuid128);

/**
 * @brief Finds included services within the specified service. For each found included service, an le_service_event_t with type set to GATT_EVENT_INCLUDED_SERVICE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery. Information about included service type (primary/secondary) can be retrieved either by sending an ATT find information request for the returned start group handle (returning the handle and the UUID for primary or secondary service) or by comparing the service to the list of all primary services.
 * @param  callback
 * @param  con_handle
 * @param  service
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_find_included_services_for_service(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service);

/**
 * @brief Discovers all characteristics within the specified service. For each found characteristic, an le_characteristics_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  service
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristics_for_service(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service);

/**
 * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  start_handle
 * @param  end_handle
 * @param  uuid16
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristics_for_handle_range_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint16_t uuid16);

/**
 * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  start_handle
 * @param  end_handle
 * @param  uuid128
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristics_for_handle_range_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint8_t  * uuid128);

/**
 * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  service
 * @param  uuid16
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristics_for_service_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service, uint16_t  uuid16);

/**
 * @brief The following four functions are used to discover all characteristics within the specified service or handle range, and return those that match the given UUID. For each found characteristic, an le_characteristic_event_t with type set to GATT_EVENT_CHARACTERISTIC_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  service
 * @param  uuid128
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristics_for_service_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_service_t  *service, uint8_t  * uuid128);

/**
 * @brief Discovers attribute handle and UUID of a characteristic descriptor within the specified characteristic. For each found descriptor, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_ALL_CHARACTERISTIC_DESCRIPTORS_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of discovery.
 * @param  callback
 * @param  con_handle
 * @param  characteristic
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_discover_characteristic_descriptors(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);

/**
 * @brief Reads the characteristic value using the characteristic's value handle. If the characteristic value is found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  characteristic
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);

/**
 * @brief Reads the characteristic value using the characteristic's value handle. If the characteristic value is found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_value_of_characteristic_using_value_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle);

/**
 * @brief Reads the characteric value of all characteristics with the uuid. For each found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  start_handle
 * @param  end_handle
 * @param  uuid16
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_value_of_characteristics_by_uuid16(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint16_t uuid16);

/**
 * @brief Reads the characteric value of all characteristics with the uuid. For each found, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  start_handle
 * @param  end_handle
 * @param  uuid128
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_value_of_characteristics_by_uuid128(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t start_handle, uint16_t end_handle, uint8_t * uuid128);

/**
 * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
 * @param  callback
 * @param  con_handle
 * @param  characteristic
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t  *characteristic);

/**
 * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_long_value_of_characteristic_using_value_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle);

/**
 * @brief Reads the long characteristic value using the characteristic's value handle. The value will be returned in several blobs. For each blob, an le_characteristic_value_event_t with type set to GATT_EVENT_CHARACTERISTIC_VALUE_QUERY_RESULT and updated value offset will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, mark the end of read.
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  offset
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_read_long_value_of_characteristic_using_value_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t offset);

/*
 * @brief Read multiple characteristic values
 * @param  callback
 * @param  con_handle
 * @param  num_value_handles
 * @param  value_handles list of handles
 */
uint8_t gatt_client_read_multiple_characteristic_values(btstack_packet_handler_t callback, hci_con_handle_t con_handle, int num_value_handles, uint16_t * value_handles);

/**
 * @brief Writes the characteristic value using the characteristic's value handle without an acknowledgment that the write was successfully performed.
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done
 * @return status BTSTACK_MEMORY_ALLOC_FAILED, if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE , if GATT client is not ready
 *                BTSTACK_ACL_BUFFERS_FULL   , if L2CAP cannot send, there are no free ACL slots
 *                ERROR_CODE_SUCCESS         , if query is successfully registered
 */
uint8_t gatt_client_write_value_of_characteristic_without_response(hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the authenticated characteristic value using the characteristic's value handle without an acknowledgment that the write was successfully performed.
 * @note GATT_EVENT_QUERY_COMPLETE is emitted with 0 for success or ATT_ERROR_BONDING_INFORMATION_MISSING if there is no bonding information stored
 * @param  callback
 * @param  con_handle
 * @param  value_handle
 * @param  message_len
 * @param  message is not copied, make sure memory is accessible until write is done
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_signed_write_without_response(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t value_handle, uint16_t message_len, uint8_t  * message);

/**
 * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic value using the characteristic's value handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  offset of value
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_long_value_of_characteristic_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t offset, uint16_t length, uint8_t  * data);

/**
 * @brief Writes of the long characteristic value using the characteristic's value handle. It uses server response to validate that the write was correctly received. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  characteristic_value_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_reliable_write_long_value_of_characteristic(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t characteristic_value_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Reads the characteristic descriptor using its handle. If the characteristic descriptor is found, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  descriptor
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_read_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor);

/**
 * @brief Reads the characteristic descriptor using its handle. If the characteristic descriptor is found, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  descriptor
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_read_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle);

/**
 * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_read_long_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor);

/**
 * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_read_long_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle);

/**
 * @brief Reads the long characteristic descriptor using its handle. It will be returned in several blobs. For each blob, an le_characteristic_descriptor_event_t with type set to GATT_EVENT_CHARACTERISTIC_DESCRIPTOR_QUERY_RESULT will be generated and passed to the registered callback. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of read.
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @param  offset
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_read_long_characteristic_descriptor_using_descriptor_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t offset);

/**
 * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  descriptor
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  descriptor
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_long_characteristic_descriptor(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_descriptor_t  * descriptor, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_long_characteristic_descriptor_using_descriptor_handle(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the characteristic descriptor using its handle. The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  descriptor_handle
 * @param  offset of value
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_long_characteristic_descriptor_using_descriptor_handle_with_offset(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t descriptor_handle, uint16_t offset, uint16_t length, uint8_t  * data);

/**
 * @brief Writes the client characteristic configuration of the specified characteristic. It is used to subscribe for notifications or indications of the characteristic value.
 * For notifications or indications specify: GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NOTIFICATION resp. GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_INDICATION as configuration value.
 * The gatt_complete_event_t with type set to GATT_EVENT_QUERY_COMPLETE, marks the end of write. The write is successfully performed, if the event's att_status field is set to ATT_ERROR_SUCCESS
 * (see bluetooth.h for ATT_ERROR codes).
 * @param  callback
 * @param  con_handle
 * @param  characteristic
 * @param  configuration                                                    GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_NOTIFICATION, GATT_CLIENT_CHARACTERISTICS_CONFIGURATION_INDICATION
 * @return status BTSTACK_MEMORY_ALLOC_FAILED                               if no GATT client for con_handle is found
 *                GATT_CLIENT_IN_WRONG_STATE                                if GATT client is not ready
 *                GATT_CLIENT_CHARACTERISTIC_NOTIFICATION_NOT_SUPPORTED     if configuring notification, but characteristic has no notification property set
 *                GATT_CLIENT_CHARACTERISTIC_INDICATION_NOT_SUPPORTED       if configuring indication, but characteristic has no indication property set
 *                ERROR_CODE_UNSUPPORTED_FEATURE_OR_PARAMETER_VALUE         if configuration is invalid
 *                ERROR_CODE_SUCCESS                                        if query is successfully registered
 */
uint8_t gatt_client_write_client_characteristic_configuration(btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t * characteristic, uint16_t configuration);

/**
 * @brief Register for notifications and indications of a characteristic enabled by gatt_client_write_client_characteristic_configuration
 * @param notification struct used to store registration
 * @param callback
 * @param con_handle or GATT_CLIENT_ANY_CONNECTION to receive updates from all connected devices
 * @param characteristic or NULL to receive updates for all characteristics
 */
void gatt_client_listen_for_characteristic_value_updates(gatt_client_notification_t * notification, btstack_packet_handler_t callback, hci_con_handle_t con_handle, gatt_client_characteristic_t * characteristic);

/**
 * @brief Stop listening to characteristic value updates registered with gatt_client_listen_for_characteristic_value_updates
 * @param notification struct used in gatt_client_listen_for_characteristic_value_updates
 */
void gatt_client_stop_listening_for_characteristic_value_updates(gatt_client_notification_t * notification);

/**
 * @brief Requests GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE that guarantees a single successful gatt_client_write_value_of_characteristic_without_response
 * @param  callback
 * @param  con_handle
 * @returns status
 */
uint8_t gatt_client_request_can_write_without_response_event(btstack_packet_handler_t callback, hci_con_handle_t con_handle);

/**
 * @brief Transactional write. It can be called as many times as it is needed to write the characteristics within the same transaction. Call gatt_client_execute_write to commit the transaction.
 * @param  callback
 * @param  con_handle
 * @param  attribute_handle
 * @param  offset of value
 * @param  length of data
 * @param  data is not copied, make sure memory is accessible until write is done, i.e. GATT_EVENT_QUERY_COMPLETE is received
 */
uint8_t gatt_client_prepare_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle, uint16_t attribute_handle, uint16_t offset, uint16_t length, uint8_t * data);

/**
 * @brief Commit transactional write. GATT_EVENT_QUERY_COMPLETE is received.
 * @param  callback
 * @param  con_handle
 */
uint8_t gatt_client_execute_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle);

/**
 * @brief Abort transactional write. GATT_EVENT_QUERY_COMPLETE is received.
 * @param  callback
 * @param  con_handle
 */
uint8_t gatt_client_cancel_write(btstack_packet_handler_t callback, hci_con_handle_t con_handle);

/* API_END */

// used by generated btstack_event.c

void gatt_client_deserialize_service(const uint8_t *packet, int offset, gatt_client_service_t *service);
void gatt_client_deserialize_characteristic(const uint8_t * packet, int offset, gatt_client_characteristic_t * characteristic);
void gatt_client_deserialize_characteristic_descriptor(const uint8_t * packet, int offset, gatt_client_characteristic_descriptor_t * descriptor);

#ifdef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
void gatt_client_att_packet_handler_fuzz(uint8_t packet_type, uint16_t handle, uint8_t *packet, uint16_t size);
#endif

#if defined __cplusplus
}
#endif

#endif