1# BTstack port for WICED platform 2 3Tested with: 4- WICED SDK 3.4-5.2 5- [RedBear Duo](https://redbear.cc/product/wifi-ble/redbear-duo.html): Please install [RedBear WICED Add-On](https://github.com/redbear/WICED-SDK) 6- [Inventek Systems ISM4334x](https://www.inventeksys.com/products-page/wifi-modules/serial-wifi/ism43341-m4g-l44-cu-embedded-serial-to-wifi-ble-nfc-module/): Please install [Inventek WICED Patches](https://www.inventeksys.com/inventekproducts/wifi-products/broadcom-wiced/) 7 8To integrate BTstack into the WICED SDK, please move the BTstack project into WICED-SDK-5.2/libraries. 9 10Then create projects for BTstack examples in WICED/apps/btstack by running: 11 12 ./create_examples.py 13 14Now, the BTstack examples can be build from the WICED root in the same way as other examples, e.g.: 15 16 ./make btstack.spp_and_le_counter-RB_DUO 17 18to build the SPP-and-LE-Counter example for the RedBear Duo (or use ISM43340_M4G_L44 for the Inventek Systems devices). 19 20See WICED documentation about how to upload the firmware. 21 22It should work with all WICED platforms that contain a Broadcom Bluetooth chipset. 23 24The maximal baud rate is currenty limited to 1 mbps. 25 26The port uses the generated WIFI address plus 1 as Bluetooth MAC address. 27It persists the LE Device DB and Classic Link Keys via the DCT mechanism. 28 29All examples that rovide a GATT Server use the GATT DB in the .gatt file. Therefore you need to run ./update_gatt_db.sh in the apps/btstack/$(EXAMPLE) folder after modifying the .gatt file. 30