xref: /btstack/port/samv71-xplained-atwilc3000/conf_clock.h (revision 1b2596b5303dd8caeea8565532c93cca8dab8cc4)

/**
 * \file
 *
 * \brief SAMV71 clock configuration.
 *
 * Copyright (c) 2015 Atmel Corporation. All rights reserved.
 *
 * \asf_license_start
 *
 * \page License
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an
 *    Atmel microcontroller product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * \asf_license_stop
 *
 */
/*
 * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
 */

#ifndef CONF_CLOCK_H_INCLUDED
#define CONF_CLOCK_H_INCLUDED

// ===== System Clock (MCK) Source Options
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_SLCK_RC
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_SLCK_XTAL
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_SLCK_BYPASS
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_MAINCK_4M_RC
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_MAINCK_8M_RC
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_MAINCK_12M_RC
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_MAINCK_XTAL
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_MAINCK_BYPASS
#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_PLLACK
//#define CONFIG_SYSCLK_SOURCE        SYSCLK_SRC_UPLLCK

// ===== Processor Clock (HCLK) Prescaler Options   (Fhclk = Fsys / (SYSCLK_PRES))
#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_1
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_2
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_4
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_8
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_16
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_32
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_64
//#define CONFIG_SYSCLK_PRES          SYSCLK_PRES_3

// ===== System Clock (MCK) Division Options     (Fmck = Fhclk / (SYSCLK_DIV))
#define CONFIG_SYSCLK_DIV            2

// ===== PLL0 (A) Options   (Fpll = (Fclk * PLL_mul) / PLL_div)
// Use mul and div effective values here.
#define CONFIG_PLL0_SOURCE          PLL_SRC_MAINCK_XTAL
#define CONFIG_PLL0_MUL             25
#define CONFIG_PLL0_DIV             1

// ===== UPLL (UTMI) Hardware fixed at 480 MHz.

// ===== USB Clock Source Options   (Fusb = FpllX / USB_div)
// Use div effective value here.
//#define CONFIG_USBCLK_SOURCE        USBCLK_SRC_PLL0
#define CONFIG_USBCLK_SOURCE        USBCLK_SRC_UPLL
#define CONFIG_USBCLK_DIV           1

// ===== Target frequency (Processor clock)
// - XTAL frequency: 12MHz
// - System clock source: PLLA
// - System clock prescaler: 1 (divided by 1)
// - System clock divider: 2 (divided by 2)
// - PLLA source: XTAL
// - PLLA output: XTAL * 25 / 1
// - Processor clock: 12 * 25 / 1 / 1 = 300MHz
// - System clock: 300 / 2 = 150MHz
// ===== Target frequency (USB Clock)
// - USB clock source: UPLL
// - USB clock divider: 1 (not divided)
// - UPLL frequency: 480MHz
// - USB clock: 480 / 1 = 480MHz

#endif /* CONF_CLOCK_H_INCLUDED */