1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN 24 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 #define __BTSTACK_FILE__ "main.c" 39 40 // ***************************************************************************** 41 // 42 // minimal setup for HCI code 43 // 44 // ***************************************************************************** 45 46 #include <stdint.h> 47 #include <stdio.h> 48 #include <stdlib.h> 49 #include <string.h> 50 #include <signal.h> 51 52 #include "btstack_config.h" 53 54 #include "bluetooth_company_id.h" 55 #include "ble/le_device_db_tlv.h" 56 #include "btstack_chipset_bcm.h" 57 #include "btstack_chipset_bcm_download_firmware.h" 58 #include "btstack_debug.h" 59 #include "btstack_event.h" 60 #include "btstack_memory.h" 61 #include "btstack_run_loop.h" 62 #include "btstack_run_loop_posix.h" 63 #include "btstack_stdin.h" 64 #include "btstack_uart.h" 65 #include "btstack_tlv_posix.h" 66 #include "classic/btstack_link_key_db_tlv.h" 67 #include "hci.h" 68 #include "hci_dump.h" 69 #include "hci_transport_h4.h" 70 #include "hci_dump_posix_fs.h" 71 #include "hci_dump_posix_stdout.h" 72 73 74 int btstack_main(int argc, const char * argv[]); 75 76 #define TLV_DB_PATH_PREFIX "/tmp/btstack_" 77 #define TLV_DB_PATH_POSTFIX ".tlv" 78 static char tlv_db_path[100]; 79 static const btstack_tlv_t * tlv_impl; 80 static btstack_tlv_posix_t tlv_context; 81 82 static hci_transport_config_uart_t transport_config = { 83 HCI_TRANSPORT_CONFIG_UART, 84 115200, 85 921600, // main baudrate 86 1, // flow control 87 NULL, 88 BTSTACK_UART_PARITY_OFF, // parity 89 }; 90 static btstack_uart_config_t uart_config; 91 92 static int main_argc; 93 static const char ** main_argv; 94 95 static btstack_packet_callback_registration_t hci_event_callback_registration; 96 97 static void sigint_handler(int param){ 98 UNUSED(param); 99 100 printf("CTRL-C - SIGINT received, shutting down..\n"); 101 log_info("sigint_handler: shutting down"); 102 103 // reset anyway 104 btstack_stdin_reset(); 105 106 // power down 107 hci_power_control(HCI_POWER_OFF); 108 hci_close(); 109 log_info("Good bye, see you.\n"); 110 exit(0); 111 } 112 113 static int led_state = 0; 114 void hal_led_toggle(void){ 115 led_state = 1 - led_state; 116 printf("LED State %u\n", led_state); 117 } 118 119 static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 120 bd_addr_t addr; 121 if (packet_type != HCI_EVENT_PACKET) return; 122 switch (hci_event_packet_get_type(packet)){ 123 case BTSTACK_EVENT_STATE: 124 if (btstack_event_state_get_state(packet) != HCI_STATE_WORKING) break; 125 gap_local_bd_addr(addr); 126 printf("BTstack up and running at %s\n", bd_addr_to_str(addr)); 127 // setup TLV 128 btstack_strcpy(tlv_db_path, sizeof(tlv_db_path), TLV_DB_PATH_PREFIX); 129 btstack_strcat(tlv_db_path, sizeof(tlv_db_path), bd_addr_to_str(addr)); 130 btstack_strcat(tlv_db_path, sizeof(tlv_db_path), TLV_DB_PATH_POSTFIX); 131 tlv_impl = btstack_tlv_posix_init_instance(&tlv_context, tlv_db_path); 132 btstack_tlv_set_instance(tlv_impl, &tlv_context); 133 #ifdef ENABLE_CLASSIC 134 hci_set_link_key_db(btstack_link_key_db_tlv_get_instance(tlv_impl, &tlv_context)); 135 #endif 136 #ifdef ENABLE_BLE 137 le_device_db_tlv_configure(tlv_impl, &tlv_context); 138 #endif 139 break; 140 default: 141 break; 142 } 143 } 144 145 static void phase2(int status); 146 int main(int argc, const char * argv[]){ 147 148 /// GET STARTED with BTstack /// 149 btstack_memory_init(); 150 151 #if 1 152 // log into file using HCI_DUMP_PACKETLOGGER format 153 const char * pklg_path = "/tmp/hci_dump.pklg"; 154 hci_dump_posix_fs_open(pklg_path, HCI_DUMP_PACKETLOGGER); 155 const hci_dump_t * hci_dump_impl = hci_dump_posix_fs_get_instance(); 156 printf("Packet Log: %s\n", pklg_path); 157 #else 158 // log to stdout for debugging/development 159 const hci_dump_t * hci_dump_impl = hci_dump_posix_stdout_get_instance(); 160 #endif 161 hci_dump_init(hci_dump_impl); 162 163 // setup run loop 164 btstack_run_loop_init(btstack_run_loop_posix_get_instance()); 165 166 // pick serial port and configure uart driver 167 transport_config.device_name = "/dev/tty.usbserial-FT1XBGIM"; // murata m.2 adapter 168 169 // get BCM chipset driver 170 const btstack_chipset_t * chipset = btstack_chipset_bcm_instance(); 171 chipset->init(&transport_config); 172 173 // set chipset name 174 btstack_chipset_bcm_set_device_name("CYW55560A1"); 175 176 // setup UART driver 177 const btstack_uart_t * uart_driver = (const btstack_uart_t *) btstack_uart_posix_instance(); 178 179 // extract UART config from transport config 180 uart_config.baudrate = transport_config.baudrate_init; 181 uart_config.flowcontrol = transport_config.flowcontrol; 182 uart_config.device_name = transport_config.device_name; 183 uart_driver->init(&uart_config); 184 185 186 // setup HCI (to be able to use bcm chipset driver) 187 // init HCI 188 const hci_transport_t * transport = hci_transport_h4_instance(uart_driver); 189 hci_init(transport, (void*) &transport_config); 190 hci_set_chipset(btstack_chipset_bcm_instance()); 191 192 // inform about BTstack state 193 hci_event_callback_registration.callback = &packet_handler; 194 hci_add_event_handler(&hci_event_callback_registration); 195 196 // handle CTRL-c 197 signal(SIGINT, sigint_handler); 198 199 main_argc = argc; 200 main_argv = argv; 201 202 // phase #1 download firmware 203 printf("Phase 1: Download firmware\n"); 204 205 // phase #2 start main app 206 btstack_chipset_bcm_download_firmware_with_uart(uart_driver, 0, &phase2); 207 208 // go 209 btstack_run_loop_execute(); 210 return 0; 211 } 212 213 static void phase2(int status){ 214 215 if (status){ 216 printf("Download firmware failed\n"); 217 return; 218 } 219 220 printf("Phase 2: Main app\n"); 221 222 // setup app 223 btstack_main(main_argc, main_argv); 224 } 225 226