1*34fd36daSMatthias Ringwald# BTstack Port for POSIX Systems with Atmel ATWILC3000 Controller 27d82eb50SMatthias RingwaldThis port allows to use the ATWILC3000 connected via UART with BTstack running on a POSIX host system, see test setup below (which lacks a proper RESET button). 3ccebdf93SMatthias Ringwald 442c38c4aSMilanka Ringwald## Compilation 5ccebdf93SMatthias Ringwald 67d82eb50SMatthias Ringwald$ make 7ccebdf93SMatthias Ringwald 87d82eb50SMatthias RingwaldThe Makefile downloads the wilc3000_bt_firmware.bin firmware from the [GitHub atwilc3000/firmware](https://github.com/atwilc3000/firmware) repo. 97d82eb50SMatthias Ringwald 1042c38c4aSMilanka Ringwald## Usage 117d82eb50SMatthias Ringwald 127d82eb50SMatthias RingwaldJust run any of the provided examples, e.g. 137d82eb50SMatthias Ringwald 147d82eb50SMatthias Ringwald$ ./le_counter 157d82eb50SMatthias Ringwald 167d82eb50SMatthias RingwaldAt start, the firmware file is first uploaded to the ATWILC3000, before BTstack start up. 177d82eb50SMatthias Ringwald 187d82eb50SMatthias RingwaldPlease note that it configures the ATWILC3000 for a higher baud rate it does not detect if the firmware has already been downloaded, so you need to reset the ATWILC3000 before starting an example. 197d82eb50SMatthias Ringwald 207d82eb50SMatthias RingwaldTested with the official [ATWILC3000 SHIELD](http://www.microchip.com/DevelopmentTools/ProductDetails.aspx?PartNO=ATWILC3000-SHLD) on OS X. 217d82eb50SMatthias Ringwald 227d82eb50SMatthias Ringwald 23
