xref: /btstack/port/libusb-intel/main.c (revision db2cdd6dc96448f10ff8dbebfde07029a76371fa)
1 /*
2  * Copyright (C) 2014 BlueKitchen GmbH
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holders nor the names of
14  *    contributors may be used to endorse or promote products derived
15  *    from this software without specific prior written permission.
16  * 4. Any redistribution, use, or modification is done solely for
17  *    personal benefit and not for any commercial purpose or for
18  *    monetary gain.
19  *
20  * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
23  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN
24  * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
25  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
26  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
27  * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
28  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
30  * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  * Please inquire about commercial licensing options at
34  * [email protected]
35  *
36  */
37 
38 #define BTSTACK_FILE__ "main.c"
39 
40 // *****************************************************************************
41 //
42 // minimal setup for HCI code
43 //
44 // *****************************************************************************
45 
46 #include <stdint.h>
47 #include <stdio.h>
48 #include <stdlib.h>
49 #include <string.h>
50 #include <signal.h>
51 
52 #include "btstack_config.h"
53 
54 #include "ble/le_device_db_tlv.h"
55 #include "btstack_audio.h"
56 #include "btstack_chipset_intel_firmware.h"
57 #include "btstack_debug.h"
58 #include "btstack_event.h"
59 #include "btstack_memory.h"
60 #include "btstack_run_loop.h"
61 #include "btstack_run_loop_posix.h"
62 #include "btstack_signal.h"
63 #include "btstack_stdin.h"
64 #include "btstack_tlv_posix.h"
65 #include "classic/btstack_link_key_db_tlv.h"
66 #include "hal_led.h"
67 #include "hci.h"
68 #include "hci_dump.h"
69 #include "hci_dump_posix_fs.h"
70 #include "hci_transport.h"
71 #include "hci_transport_usb.h"
72 
73 #define TLV_DB_PATH_PREFIX "/tmp/btstack_"
74 #define TLV_DB_PATH_POSTFIX ".tlv"
75 static char tlv_db_path[100];
76 static const btstack_tlv_t * tlv_impl;
77 static btstack_tlv_posix_t   tlv_context;
78 static bd_addr_t             local_addr;
79 
80 static int main_argc;
81 static const char ** main_argv;
82 static const hci_transport_t * transport;
83 static int intel_firmware_loaded;
84 // shutdown
85 static bool shutdown_triggered;
86 
87 int btstack_main(int argc, const char * argv[]);
88 
89 static btstack_packet_callback_registration_t hci_event_callback_registration;
90 
91 static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
92     UNUSED(channel);
93     UNUSED(size);
94     uint8_t i;
95     uint8_t usb_path_len;
96     const uint8_t * usb_path;
97 
98     if (packet_type != HCI_EVENT_PACKET) return;
99 
100     switch (hci_event_packet_get_type(packet)){
101         case HCI_EVENT_TRANSPORT_USB_INFO:
102             usb_path_len = hci_event_transport_usb_info_get_path_len(packet);
103             usb_path = hci_event_transport_usb_info_get_path(packet);
104             // print device path
105             printf("USB device 0x%04x/0x%04x, path: ",
106                    hci_event_transport_usb_info_get_vendor_id(packet),
107                    hci_event_transport_usb_info_get_product_id(packet));
108             for (i=0;i<usb_path_len;i++){
109                 if (i) printf("-");
110                 printf("%02x", usb_path[i]);
111             }
112             printf("\n");
113             break;
114         case BTSTACK_EVENT_STATE:
115             switch(btstack_event_state_get_state(packet)){
116                 case HCI_STATE_WORKING:
117                     gap_local_bd_addr(local_addr);
118                     printf("BTstack up and running on %s.\n", bd_addr_to_str(local_addr));
119                     btstack_strcpy(tlv_db_path, sizeof(tlv_db_path), TLV_DB_PATH_PREFIX);
120                     btstack_strcat(tlv_db_path, sizeof(tlv_db_path), bd_addr_to_str_with_delimiter(local_addr, '-'));
121                     btstack_strcat(tlv_db_path, sizeof(tlv_db_path), TLV_DB_PATH_POSTFIX);
122                     tlv_impl = btstack_tlv_posix_init_instance(&tlv_context, tlv_db_path);
123                     btstack_tlv_set_instance(tlv_impl, &tlv_context);
124 #ifdef ENABLE_CLASSIC
125                     hci_set_link_key_db(btstack_link_key_db_tlv_get_instance(tlv_impl, &tlv_context));
126 #endif
127 #ifdef ENABLE_BLE
128                     le_device_db_tlv_configure(tlv_impl, &tlv_context);
129 #endif
130                     break;
131                 case HCI_STATE_OFF:
132                     btstack_tlv_posix_deinit(&tlv_context);
133                     if (!shutdown_triggered) break;
134                     // reset stdin
135                     btstack_stdin_reset();
136                     log_info("Good bye, see you.\n");
137                     exit(0);
138                     break;
139                 default:
140                     break;
141             }
142             break;
143         default:
144             break;
145     }
146 }
147 
148 static void trigger_shutdown(void){
149     printf("CTRL-C - SIGINT received, shutting down..\n");
150     log_info("sigint_handler: shutting down");
151     shutdown_triggered = true;
152     hci_power_control(HCI_POWER_OFF);
153 }
154 
155 static int led_state = 0;
156 void hal_led_toggle(void){
157     led_state = 1 - led_state;
158     printf("LED State %u\n", led_state);
159 }
160 
161 static void intel_firmware_done(int result){
162 
163     printf("Done %x\n", result);
164 
165     intel_firmware_loaded = 1;
166 
167     // init HCI
168     hci_init(transport, NULL);
169 
170 #ifdef HAVE_PORTAUDIO
171     btstack_audio_sink_set_instance(btstack_audio_portaudio_sink_get_instance());
172     btstack_audio_source_set_instance(btstack_audio_portaudio_source_get_instance());
173 #endif
174 
175     // inform about BTstack state
176     hci_event_callback_registration.callback = &packet_handler;
177     hci_add_event_handler(&hci_event_callback_registration);
178 
179     // setup app
180     btstack_main(main_argc, main_argv);
181 }
182 
183 #define USB_MAX_PATH_LEN 7
184 int main(int argc, const char * argv[]){
185 
186     uint8_t usb_path[USB_MAX_PATH_LEN];
187     int usb_path_len = 0;
188     const char * usb_path_string = NULL;
189     if (argc >= 3 && strcmp(argv[1], "-u") == 0){
190         // parse command line options for "-u 11:22:33"
191         usb_path_string = argv[2];
192         printf("Specified USB Path: ");
193         while (1){
194             char * delimiter;
195             int port = strtol(usb_path_string, &delimiter, 16);
196             usb_path[usb_path_len] = port;
197             usb_path_len++;
198             printf("%02x ", port);
199             if (!delimiter) break;
200             if (*delimiter != ':' && *delimiter != '-') break;
201             usb_path_string = delimiter+1;
202         }
203         printf("\n");
204         argc -= 2;
205         memmove((void *) &argv[1], &argv[3], (argc-1) * sizeof(char *));
206     }
207 
208 	/// GET STARTED with BTstack ///
209 	btstack_memory_init();
210     btstack_run_loop_init(btstack_run_loop_posix_get_instance());
211 
212     if (usb_path_len){
213         hci_transport_usb_set_path(usb_path_len, usb_path);
214     }
215 
216     // use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT
217 
218     char pklg_path[100];
219     btstack_strcpy(pklg_path, sizeof(pklg_path),  "/tmp/hci_dump");
220     if (usb_path_len){
221         btstack_strcat(pklg_path, sizeof(pklg_path), "_");
222         btstack_strcat(pklg_path, sizeof(pklg_path), usb_path_string);
223     }
224     btstack_strcat(pklg_path, sizeof(pklg_path), ".pklg");
225     hci_dump_posix_fs_open(pklg_path, HCI_DUMP_PACKETLOGGER);
226     const hci_dump_t * hci_dump_impl = hci_dump_posix_fs_get_instance();
227     hci_dump_init(hci_dump_impl);
228     printf("Packet Log: %s\n", pklg_path);
229 
230     // setup USB Transport
231     transport = hci_transport_usb_instance();
232     btstack_chipset_intel_download_firmware(transport, &intel_firmware_done);
233 
234     // register callback for CTRL-c
235     btstack_signal_register_callback(SIGINT, &trigger_shutdown);
236 
237     // go
238     btstack_run_loop_execute();
239 
240     return 0;
241 }
242