1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN 24 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 #define BTSTACK_FILE__ "rfcomm_echo.c" 39 40 /* 41 * rfcomm_echo.c 42 */ 43 44 #include <unistd.h> 45 #include <stdio.h> 46 #include <stdlib.h> 47 #include <strings.h> 48 #include <errno.h> 49 #include <string.h> 50 #include <fcntl.h> 51 #include <sys/types.h> 52 #include <sys/stat.h> 53 54 #include "btstack_client.h" 55 #include "classic/sdp_util.h" 56 57 #ifdef _WIN32 58 #include "btstack_run_loop_windows.h" 59 #else 60 #include "btstack_run_loop_posix.h" 61 #endif 62 63 // input from command line arguments 64 bd_addr_t addr = { }; 65 hci_con_handle_t con_handle; 66 uint16_t mtu; 67 char pin[17]; 68 int counter = 0; 69 uint16_t rfcomm_channel_nr; 70 uint16_t rfcomm_channel_id; 71 72 uint8_t service_buffer[150]; 73 74 void packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 75 bd_addr_t event_addr; 76 77 switch (packet_type) { 78 79 case RFCOMM_DATA_PACKET: 80 printf("Received RFCOMM data on channel id %u, size %u\n", channel, size); 81 printf_hexdump(packet, size); 82 bt_send_rfcomm(channel, packet, size); 83 break; 84 85 case HCI_EVENT_PACKET: 86 switch (hci_event_packet_get_type(packet)) { 87 88 case BTSTACK_EVENT_POWERON_FAILED: 89 // handle HCI init failure 90 printf("HCI Init failed - make sure you have turned off Bluetooth in the System Settings\n"); 91 exit(1); 92 break; 93 94 case BTSTACK_EVENT_STATE: 95 // bt stack activated, get started 96 if (btstack_event_state_get_state(packet) == HCI_STATE_WORKING){ 97 // get persistent RFCOMM channel 98 printf("HCI_STATE_WORKING\n"); 99 bt_send_cmd(&rfcomm_persistent_channel_for_service_cmd, "ch.ringwald.btstack.rfcomm_echo2"); 100 } 101 break; 102 103 case DAEMON_EVENT_RFCOMM_PERSISTENT_CHANNEL: 104 rfcomm_channel_nr = packet[3]; 105 printf("RFCOMM channel %u was assigned by BTdaemon\n", rfcomm_channel_nr); 106 bt_send_cmd(&rfcomm_register_service_cmd, rfcomm_channel_nr, 0xffff); // reserved channel, mtu limited by l2cap 107 break; 108 109 case DAEMON_EVENT_RFCOMM_SERVICE_REGISTERED: 110 printf("DAEMON_EVENT_RFCOMM_SERVICE_REGISTERED channel: %u, status: 0x%02x\n", packet[3], packet[2]); 111 // register SDP for our SPP 112 spp_create_sdp_record((uint8_t*)service_buffer, 0x10001, rfcomm_channel_nr, "SPP ECHO"); 113 bt_send_cmd(&sdp_register_service_record_cmd, service_buffer); 114 bt_send_cmd(&btstack_set_discoverable, 1); 115 break; 116 117 case HCI_EVENT_PIN_CODE_REQUEST: 118 // inform about pin code request 119 printf("Using PIN 0000\n"); 120 hci_event_pin_code_request_get_bd_addr(packet, event_addr); 121 bt_send_cmd(&hci_pin_code_request_reply, &event_addr, 4, "0000"); 122 break; 123 124 case RFCOMM_EVENT_INCOMING_CONNECTION: 125 // data: event (8), len(8), address(48), channel (8), rfcomm_cid (16) 126 rfcomm_event_incoming_connection_get_bd_addr(packet, event_addr); 127 rfcomm_channel_nr = rfcomm_event_incoming_connection_get_server_channel(packet); 128 rfcomm_channel_id = rfcomm_event_incoming_connection_get_rfcomm_cid(packet); 129 printf("RFCOMM channel %u requested for %s\n", rfcomm_channel_nr, bd_addr_to_str(event_addr)); 130 bt_send_cmd(&rfcomm_accept_connection_cmd, rfcomm_channel_id); 131 break; 132 133 case RFCOMM_EVENT_CHANNEL_OPENED: 134 // data: event(8), len(8), status (8), address (48), server channel(8), rfcomm_cid(16), max frame size(16) 135 if (rfcomm_event_channel_opened_get_status(packet)) { 136 printf("RFCOMM channel open failed, status %u\n", rfcomm_event_channel_opened_get_status(packet)); 137 } else { 138 rfcomm_channel_id = rfcomm_event_channel_opened_get_rfcomm_cid(packet); 139 mtu = rfcomm_event_channel_opened_get_max_frame_size(packet); 140 printf("RFCOMM channel open succeeded. New RFCOMM Channel ID %u, max frame size %u\n", rfcomm_channel_id, mtu); 141 } 142 break; 143 144 case HCI_EVENT_DISCONNECTION_COMPLETE: 145 // connection closed -> quit test app 146 printf("Basebank connection closed\n"); 147 break; 148 149 default: 150 break; 151 } 152 break; 153 default: 154 break; 155 } 156 } 157 158 159 int main (int argc, const char * argv[]){ 160 161 #ifdef _WIN32 162 btstack_run_loop_init(btstack_run_loop_windows_get_instance()); 163 #else 164 btstack_run_loop_init(btstack_run_loop_posix_get_instance()); 165 #endif 166 int err = bt_open(); 167 if (err) { 168 fprintf(stderr,"Failed to open connection to BTdaemon, err %d\n",err); 169 return 1; 170 } 171 bt_register_packet_handler(packet_handler); 172 173 bt_send_cmd(&btstack_set_power_mode, HCI_POWER_ON ); 174 btstack_run_loop_execute(); 175 bt_close(); 176 return 0; 177 } 178