1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 // ***************************************************************************** 39 // 40 // minimal setup for SDP client over USB or UART 41 // 42 // ***************************************************************************** 43 44 #include "btstack_config.h" 45 46 #include <stdint.h> 47 #include <stdio.h> 48 #include <stdlib.h> 49 #include <string.h> 50 51 52 #include "hci_cmd.h" 53 #include "btstack_run_loop.h" 54 55 #include "hci.h" 56 #include "btstack_memory.h" 57 #include "hci_dump.h" 58 #include "l2cap.h" 59 #include "classic/sdp_client_rfcomm.h" 60 #include "classic/rfcomm.h" 61 #include "btstack_event.h" 62 63 #define NUM_ROWS 25 64 #define NUM_COLS 40 65 66 typedef enum { 67 W4_SDP_RESULT, 68 W4_SDP_COMPLETE, 69 W4_RFCOMM_CHANNEL, 70 DONE 71 } state_t; 72 73 static void handle_query_rfcomm_event(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size); 74 75 #define DATA_VOLUME (10 * 1000 * 1000) 76 77 // configuration area { 78 static bd_addr_t remote = {0x84, 0x38, 0x35, 0x65, 0xD1, 0x15}; // address of remote device 79 static const char * spp_service_name_prefix = "Bluetooth-Incoming"; // default on OS X 80 // configuration area } 81 82 static uint8_t test_data[NUM_ROWS * NUM_COLS]; 83 static uint16_t test_data_len = sizeof(test_data); 84 static uint8_t channel_nr = 0; 85 static uint16_t mtu; 86 static uint16_t rfcomm_cid = 0; 87 static uint32_t data_to_send = DATA_VOLUME; 88 static state_t state = W4_SDP_RESULT; 89 static btstack_packet_callback_registration_t hci_event_callback_registration; 90 91 /* 92 * @section Track throughput 93 * @text We calculate the throughput by setting a start time and measuring the amount of 94 * data sent. After a configurable REPORT_INTERVAL_MS, we print the throughput in kB/s 95 * and reset the counter and start time. 96 */ 97 98 /* LISTING_START(tracking): Tracking throughput */ 99 #define REPORT_INTERVAL_MS 3000 100 static uint32_t test_data_sent; 101 static uint32_t test_data_start; 102 103 static void test_reset(void){ 104 test_data_start = btstack_run_loop_get_time_ms(); 105 test_data_sent = 0; 106 } 107 108 static void test_track_sent(int bytes_sent){ 109 test_data_sent += test_data_len; 110 // evaluate 111 uint32_t now = btstack_run_loop_get_time_ms(); 112 uint32_t time_passed = now - test_data_start; 113 if (time_passed < REPORT_INTERVAL_MS) return; 114 // print speed 115 int bytes_per_second = test_data_sent * 1000 / time_passed; 116 printf("%u bytes sent-> %u.%03u kB/s\n", (int) test_data_sent, (int) bytes_per_second / 1000, bytes_per_second % 1000); 117 118 // restart 119 test_data_start = now; 120 test_data_sent = 0; 121 } 122 /* LISTING_END(tracking): Tracking throughput */ 123 124 125 static void create_test_data(void){ 126 int x,y; 127 for (y=0;y<NUM_ROWS;y++){ 128 for (x=0;x<NUM_COLS-2;x++){ 129 test_data[y*NUM_COLS+x] = '0' + (x % 10); 130 } 131 test_data[y*NUM_COLS+NUM_COLS-2] = '\n'; 132 test_data[y*NUM_COLS+NUM_COLS-1] = '\r'; 133 } 134 } 135 136 static void send_packet(void){ 137 rfcomm_send(rfcomm_cid, (uint8_t*) test_data, test_data_len); 138 139 test_track_sent(test_data_len); 140 if (data_to_send <= test_data_len){ 141 printf("SPP Streamer: enough data send, closing channel\n"); 142 rfcomm_disconnect(rfcomm_cid); 143 rfcomm_cid = 0; 144 return; 145 } 146 data_to_send -= test_data_len; 147 rfcomm_request_can_send_now_event(rfcomm_cid); 148 } 149 150 static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 151 if (packet_type != HCI_EVENT_PACKET) return; 152 uint8_t event = hci_event_packet_get_type(packet); 153 154 switch (event) { 155 case BTSTACK_EVENT_STATE: 156 // bt stack activated, get started 157 if (packet[2] == HCI_STATE_WORKING){ 158 printf("SDP Query for RFCOMM services on %s started\n", bd_addr_to_str(remote)); 159 sdp_client_query_rfcomm_channel_and_name_for_uuid(&handle_query_rfcomm_event, remote, SDP_PublicBrowseGroup); 160 } 161 break; 162 case RFCOMM_EVENT_OPEN_CHANNEL_COMPLETE: 163 // data: event(8), len(8), status (8), address (48), handle(16), server channel(8), rfcomm_cid(16), max frame size(16) 164 state = DONE; 165 if (packet[2]) { 166 printf("RFCOMM channel open failed, status %u\n", packet[2]); 167 } else { 168 // data: event(8), len(8), status (8), address (48), handle (16), server channel(8), rfcomm_cid(16), max frame size(16) 169 rfcomm_cid = little_endian_read_16(packet, 12); 170 mtu = little_endian_read_16(packet, 14); 171 printf("RFCOMM channel open succeeded. New RFCOMM Channel ID %u, max frame size %u\n", rfcomm_cid, mtu); 172 if ((test_data_len > mtu)) { 173 test_data_len = mtu; 174 } 175 test_reset(); 176 rfcomm_request_can_send_now_event(rfcomm_cid); 177 break; 178 } 179 break; 180 case RFCOMM_EVENT_CAN_SEND_NOW: 181 // try_send_packets(); 182 send_packet(); 183 break; 184 default: 185 break; 186 } 187 } 188 189 static void handle_found_service(const char * name, uint8_t port){ 190 printf("APP: Service name: '%s', RFCOMM port %u\n", name, port); 191 192 if (strncmp(name, spp_service_name_prefix, strlen(spp_service_name_prefix)) != 0) return; 193 194 printf("APP: matches requested SPP Service Name\n"); 195 channel_nr = port; 196 state = W4_SDP_COMPLETE; 197 } 198 199 static void handle_query_rfcomm_event(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 200 switch (packet[0]){ 201 case SDP_EVENT_QUERY_RFCOMM_SERVICE: 202 handle_found_service(sdp_event_query_rfcomm_service_get_name(packet), 203 sdp_event_query_rfcomm_service_get_rfcomm_channel(packet)); 204 break; 205 case SDP_EVENT_QUERY_COMPLETE: 206 if (state != W4_SDP_COMPLETE){ 207 printf("Requested SPP Service %s not found \n", spp_service_name_prefix); 208 break; 209 } 210 // connect 211 printf("Requested SPP Service found, creating RFCOMM channel\n"); 212 state = W4_RFCOMM_CHANNEL; 213 rfcomm_create_channel(packet_handler, remote, channel_nr, NULL); 214 break; 215 default: 216 break; 217 } 218 } 219 220 int btstack_main(int argc, const char * argv[]); 221 int btstack_main(int argc, const char * argv[]){ 222 223 create_test_data(); 224 225 printf("Client HCI init done\r\n"); 226 227 // register for HCI events 228 hci_event_callback_registration.callback = &packet_handler; 229 hci_add_event_handler(&hci_event_callback_registration); 230 231 // init L2CAP 232 l2cap_init(); 233 234 // turn on! 235 hci_power_control(HCI_POWER_ON); 236 237 return 0; 238 } 239