xref: /btstack/example/sm_pairing_peripheral.c (revision f1b34e8dd9b1fdccaf026fb61fff3e60bf7a0dd7)

/*
 * Copyright (C) 2014 BlueKitchen GmbH
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 * 4. Any redistribution, use, or modification is done solely for
 *    personal benefit and not for any commercial purpose or for
 *    monetary gain.
 *
 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Please inquire about commercial licensing options at
 * [email protected]
 *
 */

// *****************************************************************************
/* EXAMPLE_START(sm_pairing_peripheral): LE Peripheral - Test pairing combinations
 *
 * @text Depending on the Authentication requiremens and IO Capabilities,
 * the pairing process uses different short and long term key generation method.
 * This example helps explore the different options incl. LE Secure Connections.
 */
 // *****************************************************************************

#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "sm_pairing_peripheral.h"
#include "btstack.h"

/* @section Main Application Setup
 *
 * @text Listing MainConfiguration shows main application code.
 * It initializes L2CAP, the Security Manager and configures the ATT Server with the pre-compiled
 * ATT Database generated from $sm_pairing_peripheral.gatt$. Finally, it configures the advertisements
 * and boots the Bluetooth stack.
 * In this example, the Advertisement contains the Flags attribute and the device name.
 * The flag 0x06 indicates: LE General Discoverable Mode and BR/EDR not supported.
 * Various examples for IO Capabilites and Authentication Requirements are given below.
 */

/* LISTING_START(MainConfiguration): Init L2CAP SM ATT Server and start heartbeat timer */
static btstack_packet_callback_registration_t hci_event_callback_registration;
static btstack_packet_callback_registration_t sm_event_callback_registration;
// static hci_con_handle_t con_handle;

static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size);

const uint8_t adv_data[] = {
    // Flags general discoverable, BR/EDR not supported
    0x02, 0x01, 0x06,
    // Name
    0x0b, 0x09, 'S', 'M', ' ', 'P', 'a', 'i', 'r', 'i', 'n', 'g',
};
const uint8_t adv_data_len = sizeof(adv_data);

static void sm_peripheral_setup(void){

    // register for HCI events
    hci_event_callback_registration.callback = &packet_handler;
    hci_add_event_handler(&hci_event_callback_registration);

    l2cap_init();

    // setup le device db
    le_device_db_init();

    // setup SM: Display only
    sm_init();
    sm_event_callback_registration.callback = &packet_handler;
    sm_add_event_handler(&sm_event_callback_registration);

    /**
     * Choose ONE of the following configurations
     */

    // LE Legacy Pairing, Just Works
    sm_set_io_capabilities(IO_CAPABILITY_NO_INPUT_NO_OUTPUT);
    sm_set_authentication_requirements(0);

    // LE Legacy Pairing, Passkey entry initiator enter, responder (us) displays
    // sm_set_io_capabilities(IO_CAPABILITY_DISPLAY_ONLY);
    // sm_set_authentication_requirements(SM_AUTHREQ_MITM_PROTECTION);

#ifdef ENABLE_LE_SECURE_CONNECTIONS
    // LE Secure Connetions, Just Works
    // sm_set_io_capabilities(IO_CAPABILITY_DISPLAY_YES_NO);
    // sm_set_authentication_requirements(SM_AUTHREQ_SECURE_CONNECTION);

    // LE Secure Connections, Numeric Comparison
    // sm_set_io_capabilities(IO_CAPABILITY_DISPLAY_YES_NO);
    // sm_set_authentication_requirements(SM_AUTHREQ_SECURE_CONNECTION|SM_AUTHREQ_MITM_PROTECTION);

    // LE Legacy Pairing, Passkey entry initiator enter, responder (us) displays
    // sm_set_io_capabilities(IO_CAPABILITY_DISPLAY_ONLY);
    // sm_set_authentication_requirements(SM_AUTHREQ_SECURE_CONNECTION|SM_AUTHREQ_MITM_PROTECTION);
#endif

    // setup ATT server
    att_server_init(profile_data, NULL, NULL);
    att_server_register_packet_handler(packet_handler);

    // setup advertisements
    uint16_t adv_int_min = 0x0030;
    uint16_t adv_int_max = 0x0030;
    uint8_t adv_type = 0;
    bd_addr_t null_addr;
    memset(null_addr, 0, 6);
    gap_advertisements_set_params(adv_int_min, adv_int_max, adv_type, 0, null_addr, 0x07, 0x00);
    gap_advertisements_set_data(adv_data_len, (uint8_t*) adv_data);
    gap_advertisements_enable(1);
}

/* LISTING_END */

/*
 * @section Packet Handler
 *
 * @text The packet handler is used to:
 *        - stop the counter after a disconnect
 *        - send a notification when the requested ATT_EVENT_CAN_SEND_NOW is received
 */

/* LISTING_START(packetHandler): Packet Handler */
static void packet_handler (uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){
    UNUSED(channel);
    UNUSED(size);

    bd_addr_t addr;
    switch (packet_type) {
        case HCI_EVENT_PACKET:
            switch (hci_event_packet_get_type(packet)) {
                case SM_EVENT_JUST_WORKS_REQUEST:
                    printf("Just Works requested\n");
                    sm_just_works_confirm(sm_event_just_works_request_get_handle(packet));
                    break;
                case SM_EVENT_NUMERIC_COMPARISON_REQUEST:
                    printf("Confirming numeric comparison: %u\n", sm_event_numeric_comparison_request_get_passkey(packet));
                    sm_numeric_comparison_confirm(sm_event_passkey_display_number_get_handle(packet));
                    break;
                case SM_EVENT_PASSKEY_DISPLAY_NUMBER:
                    printf("Display Passkey: %u\n", sm_event_passkey_display_number_get_passkey(packet));
                    break;
                case SM_EVENT_IDENTITY_CREATED:
                    sm_event_identity_created_get_identity_address(packet, addr);
                    printf("Identity created: type %u address %s\n", sm_event_identity_created_get_identity_addr_type(packet), bd_addr_to_str(addr));
                    break;
                case SM_EVENT_IDENTITY_RESOLVING_SUCCEEDED:
                    sm_event_identity_resolving_succeeded_get_identity_address(packet, addr);
                    printf("Identity resolved: type %u address %s\n", sm_event_identity_resolving_succeeded_get_identity_addr_type(packet), bd_addr_to_str(addr));
                    break;
                case SM_EVENT_IDENTITY_RESOLVING_FAILED:
                    sm_event_identity_created_get_address(packet, addr);
                    printf("Identity resolving failed\n");
                    break;
            }
            break;
    }
}
/* LISTING_END */

int btstack_main(void);
int btstack_main(void)
{
    sm_peripheral_setup();

    // turn on!
	hci_power_control(HCI_POWER_ON);

    return 0;
}
/* EXAMPLE_END */