1 /* 2 * Copyright (C) 2014 BlueKitchen GmbH 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY BLUEKITCHEN GMBH AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BLUEKITCHEN 24 * GMBH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at 34 * [email protected] 35 * 36 */ 37 38 #define BTSTACK_FILE__ "pbap_client_demo.c" 39 40 // ***************************************************************************** 41 /* EXAMPLE_START(pbap_client_demo): PBAP Client - Get Contacts from Phonebook Server 42 * 43 * @text Note: The Bluetooth address of the remote Phonbook server is hardcoded. 44 * Change it before running example, then use the UI to connect to it, to set and 45 * query contacts. 46 */ 47 // ***************************************************************************** 48 49 50 #include "btstack_config.h" 51 52 #include <stdint.h> 53 #include <stdio.h> 54 #include <stdlib.h> 55 #include <string.h> 56 57 #include "btstack.h" 58 59 #ifdef HAVE_BTSTACK_STDIN 60 #include "btstack_stdin.h" 61 #endif 62 63 static void packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size); 64 65 static bd_addr_t remote_addr; 66 // MBP2016 "F4-0F-24-3B-1B-E1" 67 // Nexus 7 "30-85-A9-54-2E-78" 68 // iPhone SE "BC:EC:5D:E6:15:03" 69 // PTS "001BDC080AA5" 70 static char * remote_addr_string = "DC:52:85:B4:AD:2B "; 71 72 static char * phone_number = "911"; 73 74 static const char * pb_name = "pb"; 75 static const char * fav_name = "fav"; 76 static const char * ich_name = "ich"; 77 static const char * och_name = "och"; 78 static const char * mch_name = "mch"; 79 static const char * cch_name = "cch"; 80 static const char * spd_name = "spd"; 81 82 static const char * phonebook_name; 83 static char phonebook_folder[30]; 84 static char phonebook_path[30]; 85 86 static btstack_packet_callback_registration_t hci_event_callback_registration; 87 static uint16_t pbap_cid; 88 89 static int sim1_selected; 90 91 static void refresh_phonebook_folder_and_path(void){ 92 sprintf(phonebook_path, "%s%s.vcf", sim1_selected ? "SIM1/telecom/" : "telecom/", phonebook_name); 93 sprintf(phonebook_folder, "%s%s", sim1_selected ? "SIM1/telecom/" : "telecom/", phonebook_name); 94 printf("[-] Phonebook folder '%s'\n", phonebook_folder); 95 printf("[-] Phonebook path '%s'\n", phonebook_path); 96 } 97 98 static void select_phonebook(const char * phonebook){ 99 phonebook_name = phonebook; 100 printf("[-] Phonebook name '%s'\n", phonebook_name); 101 refresh_phonebook_folder_and_path(); 102 } 103 104 #ifdef HAVE_BTSTACK_STDIN 105 106 // Testing User Interface 107 static void show_usage(void){ 108 bd_addr_t iut_address; 109 gap_local_bd_addr(iut_address); 110 111 printf("\n--- Bluetooth PBAP Client (HF) Test Console %s ---\n", bd_addr_to_str(iut_address)); 112 printf("Phonebook: '%s'\n", phonebook_folder); 113 // printf("Phonebook folder '%s'\n", phonebook_folder); 114 printf("Phonebook path '%s'\n", phonebook_path); 115 printf("\n"); 116 printf("a - establish PBAP connection to %s\n", bd_addr_to_str(remote_addr)); 117 printf("b - select SIM1\n"); 118 printf("r - set path to '/telecom'\n"); 119 printf("R - set path to '/SIM1/telecom'\n"); 120 printf("u - set path to '%s'\n", phonebook_folder); 121 printf("v - set vCardSelector to N and TEL\n"); 122 printf("V - set vCardSelectorOperator to AND\n"); 123 124 printf("e - select phonebook '%s'\n", pb_name); 125 printf("f - select phonebook '%s'\n", fav_name); 126 printf("i - select phonebook '%s'\n", ich_name); 127 printf("o - select phonebook '%s'\n", och_name); 128 printf("m - select phonebook '%s'\n", mch_name); 129 printf("c - select phonebook '%s'\n", cch_name); 130 printf("s - select phonebook '%s'\n", spd_name); 131 132 printf("d - get size of '%s'\n", phonebook_path); 133 printf("g - pull phonebook '%s'\n", phonebook_path); 134 printf("h - pull vCard listing '%s'\n", phonebook_folder); 135 printf("l - get vCard 0.vcf\n"); 136 printf("L - get vCard X-BT-UID::1234567890ABCDEF1234567890000001\n"); 137 printf("j - Lookup contact with number '%s'\n", phone_number); 138 printf("t - disconnnect\n"); 139 printf("p - authenticate using password '0000'\n"); 140 printf("r - set path to 'telecom'\n"); 141 printf("x - abort operation\n"); 142 printf("\n"); 143 } 144 145 static void stdin_process(char c){ 146 switch (c){ 147 case 'a': 148 printf("[+] Connecting to %s...\n", bd_addr_to_str(remote_addr)); 149 pbap_connect(&packet_handler, remote_addr, &pbap_cid); 150 break; 151 case 'b': 152 printf("[+] SIM1 selected'\n"); 153 sim1_selected = 1; 154 refresh_phonebook_folder_and_path(); 155 break; 156 157 case 'd': 158 printf("[+] Get size of phonebook '%s'\n", phonebook_path); 159 pbap_get_phonebook_size(pbap_cid, phonebook_path); 160 break; 161 case 'g': 162 printf("[+] Pull phonebook '%s'\n", phonebook_path); 163 pbap_pull_phonebook(pbap_cid, phonebook_path); 164 break; 165 case 'h': 166 printf("[+] Pull vCard list for '%s'\n", phonebook_folder); 167 pbap_pull_vcard_listing(pbap_cid, ""); 168 break; 169 case 'j': 170 printf("[+] Lookup name for number '%s'\n", phone_number); 171 pbap_lookup_by_number(pbap_cid, phone_number); 172 break; 173 case 'l': 174 printf("[+] Pull vCard '1.vcf'\n"); 175 pbap_pull_vcard_entry(pbap_cid, "1.vcf"); 176 break; 177 case 'L': 178 printf("[+] Pull vCard 'X-BT-UID:1234567890ABCDEF1234567890000001'\n"); 179 pbap_pull_vcard_entry(pbap_cid, "X-BT-UID:1234567890ABCDEF1234567890000001"); 180 break; 181 182 case 'c': 183 printf("[+] Select phonebook '%s'\n", cch_name); 184 select_phonebook(cch_name); 185 break; 186 case 'e': 187 printf("[+] Select phonebook '%s'\n", pb_name); 188 select_phonebook(pb_name); 189 break; 190 case 'f': 191 printf("[+] Select phonebook '%s'\n", fav_name); 192 select_phonebook(fav_name); 193 break; 194 case 'i': 195 printf("[+] Select phonebook '%s'\n", ich_name); 196 select_phonebook(ich_name); 197 break; 198 case 'm': 199 printf("[+] Select phonebook '%s'\n", mch_name); 200 select_phonebook(mch_name); 201 break; 202 case 'o': 203 printf("[+] Select phonebook '%s'\n", och_name); 204 select_phonebook(och_name); 205 break; 206 case 's': 207 printf("[+] Select phonebook '%s'\n", spd_name); 208 select_phonebook(spd_name); 209 break; 210 211 case 'p': 212 pbap_authentication_password(pbap_cid, "0000"); 213 break; 214 case 'v': 215 printf("[+] Set vCardSelector 'N' and 'TEL'\n"); 216 pbap_set_vcard_selector(pbap_cid, PBAP_PROPERTY_MASK_N | PBAP_PROPERTY_MASK_TEL); 217 break; 218 case 'V': 219 printf("[+] Set vCardSelectorOperator 'AND'\n"); 220 pbap_set_vcard_selector_operator(pbap_cid, PBAP_VCARD_SELECTOR_OPERATOR_AND); 221 break; 222 case 'r': 223 printf("[+] Set path to '/telecom'\n"); 224 pbap_set_phonebook(pbap_cid, "telecom"); 225 break; 226 case 'R': 227 printf("[+] Set path to '/SIM1/telecom'\n"); 228 pbap_set_phonebook(pbap_cid, "SIM1/telecom"); 229 break; 230 case 'u': 231 printf("[+] Set path to '%s'\n", phonebook_folder); 232 pbap_set_phonebook(pbap_cid, phonebook_folder); 233 break; 234 case 'x': 235 printf("[+] Abort'\n"); 236 pbap_abort(pbap_cid); 237 break; 238 case 't': 239 pbap_disconnect(pbap_cid); 240 break; 241 default: 242 show_usage(); 243 break; 244 } 245 } 246 247 // packet handler for interactive console 248 static void packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 249 UNUSED(channel); 250 UNUSED(size); 251 int i; 252 uint8_t status; 253 char buffer[32]; 254 switch (packet_type){ 255 case HCI_EVENT_PACKET: 256 switch (hci_event_packet_get_type(packet)) { 257 case BTSTACK_EVENT_STATE: 258 // BTstack activated, get started 259 if (btstack_event_state_get_state(packet) == HCI_STATE_WORKING){ 260 show_usage(); 261 } 262 break; 263 case HCI_EVENT_PBAP_META: 264 switch (hci_event_pbap_meta_get_subevent_code(packet)){ 265 case PBAP_SUBEVENT_CONNECTION_OPENED: 266 status = pbap_subevent_connection_opened_get_status(packet); 267 if (status){ 268 printf("[!] Connection failed, status 0x%02x\n", status); 269 } else { 270 printf("[+] Connected\n"); 271 } 272 break; 273 case PBAP_SUBEVENT_CONNECTION_CLOSED: 274 printf("[+] Connection closed\n"); 275 break; 276 case PBAP_SUBEVENT_OPERATION_COMPLETED: 277 printf("[+] Operation complete\n"); 278 break; 279 case PBAP_SUBEVENT_AUTHENTICATION_REQUEST: 280 printf("[?] Authentication requested\n"); 281 break; 282 case PBAP_SUBEVENT_PHONEBOOK_SIZE: 283 status = pbap_subevent_phonebook_size_get_status(packet); 284 if (status){ 285 printf("[!] Get Phonebook size error: 0x%x\n", status); 286 } else { 287 printf("[+] Phonebook size: %u\n", pbap_subevent_phonebook_size_get_phonebook_size(packet)); 288 } 289 break; 290 case PBAP_SUBEVENT_CARD_RESULT: 291 memcpy(buffer, pbap_subevent_card_result_get_name(packet), pbap_subevent_card_result_get_name_len(packet)); 292 buffer[pbap_subevent_card_result_get_name_len(packet)] = 0; 293 printf("[-] Name: '%s'\n", buffer); 294 memcpy(buffer, pbap_subevent_card_result_get_handle(packet), pbap_subevent_card_result_get_handle_len(packet)); 295 buffer[pbap_subevent_card_result_get_handle_len(packet)] = 0; 296 printf("[-] Handle: '%s'\n", buffer); 297 break; 298 default: 299 break; 300 } 301 break; 302 default: 303 break; 304 } 305 break; 306 case PBAP_DATA_PACKET: 307 for (i=0;i<size;i++){ 308 printf("%c", packet[i]); 309 } 310 break; 311 default: 312 break; 313 } 314 } 315 #else 316 317 // packet handler for emdded system with fixed operation sequence 318 static void packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size){ 319 UNUSED(channel); 320 UNUSED(size); 321 int i; 322 switch (packet_type){ 323 case HCI_EVENT_PACKET: 324 switch (hci_event_packet_get_type(packet)) { 325 case BTSTACK_EVENT_STATE: 326 // BTstack activated, get started 327 if (btstack_event_state_get_state(packet) == HCI_STATE_WORKING){ 328 printf("[+] Connect to Phone Book Server on %s\n", bd_addr_to_str(remote_addr)); 329 pbap_connect(&packet_handler, remote_addr, &pbap_cid); 330 } 331 break; 332 case HCI_EVENT_PBAP_META: 333 switch (hci_event_pbap_meta_get_subevent_code(packet)){ 334 case PBAP_SUBEVENT_CONNECTION_OPENED: 335 printf("[+] Connected\n"); 336 printf("[+] Pull phonebook\n"); 337 pbap_pull_phonebook(pbap_cid, phonebook_path); 338 break; 339 case PBAP_SUBEVENT_CONNECTION_CLOSED: 340 printf("[+] Connection closed\n"); 341 break; 342 case PBAP_SUBEVENT_OPERATION_COMPLETED: 343 printf("[+] Operation complete\n"); 344 printf("[+] Pull Phonebook complete\n"); 345 pbap_disconnect(pbap_cid); 346 break; 347 default: 348 break; 349 } 350 break; 351 default: 352 break; 353 } 354 break; 355 case PBAP_DATA_PACKET: 356 for (i=0;i<size;i++){ 357 printf("%c", packet[i]); 358 } 359 break; 360 default: 361 break; 362 } 363 } 364 #endif 365 366 int btstack_main(int argc, const char * argv[]); 367 int btstack_main(int argc, const char * argv[]){ 368 (void)argc; 369 (void)argv; 370 371 // init L2CAP 372 l2cap_init(); 373 374 #ifdef ENABLE_BLE 375 // Initialize LE Security Manager. Needed for cross-transport key derivation 376 sm_init(); 377 #endif 378 379 // init RFCOM 380 rfcomm_init(); 381 382 // init GOEP Client 383 goep_client_init(); 384 385 // init PBAP Client 386 pbap_client_init(); 387 388 // register for HCI events 389 hci_event_callback_registration.callback = &packet_handler; 390 hci_add_event_handler(&hci_event_callback_registration); 391 392 sscanf_bd_addr(remote_addr_string, remote_addr); 393 394 select_phonebook(pb_name); 395 396 #ifdef HAVE_BTSTACK_STDIN 397 btstack_stdin_setup(stdin_process); 398 #endif 399 400 // turn on! 401 hci_power_control(HCI_POWER_ON); 402 403 return 0; 404 } 405 /* EXAMPLE_END */ 406