1 /* 2 * Copyright (C) 2009-2012 by Matthias Ringwald 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. Neither the name of the copyright holders nor the names of 14 * contributors may be used to endorse or promote products derived 15 * from this software without specific prior written permission. 16 * 4. Any redistribution, use, or modification is done solely for 17 * personal benefit and not for any commercial purpose or for 18 * monetary gain. 19 * 20 * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS 24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * Please inquire about commercial licensing options at [email protected] 34 * 35 */ 36 37 #define BTSTACK_FILE__ "btstack_chipset_bcm.c" 38 39 /* 40 * bt_control_bcm.c 41 * 42 * Adapter to use Broadcom-based chipsets with BTstack 43 */ 44 45 46 #include "btstack_config.h" 47 48 #include <stddef.h> /* NULL */ 49 #include <stdio.h> 50 #include <string.h> /* memcpy */ 51 52 #include "btstack_control.h" 53 #include "btstack_debug.h" 54 #include "btstack_chipset_bcm.h" 55 #include "hci.h" 56 57 #ifdef HAVE_POSIX_FILE_IO 58 #include "tinydir.h" 59 #include <ctype.h> 60 #endif 61 62 #ifdef _MSC_VER 63 // ignore deprecated warning for fopen 64 #pragma warning(disable : 4996) 65 66 // map strncasecmp 67 #define strncasecmp _strnicmp 68 #endif 69 70 // assert outgoing and incoming hci packet buffers can hold max hci command resp. event packet 71 #if HCI_OUTGOING_PACKET_BUFFER_SIZE < (HCI_CMD_HEADER_SIZE + 255) 72 #error "HCI_OUTGOING_PACKET_BUFFER_SIZE to small. Outgoing HCI packet buffer to small for largest HCI Command packet. Please set HCI_ACL_PAYLOAD_SIZE to 258 or higher." 73 #endif 74 #if HCI_INCOMING_PACKET_BUFFER_SIZE < (HCI_EVENT_HEADER_SIZE + 255) 75 #error "HCI_INCOMING_PACKET_BUFFER_SIZE to small. Incoming HCI packet buffer to small for largest HCI Event packet. Please set HCI_ACL_PAYLOAD_SIZE to 257 or higher." 76 #endif 77 78 static int send_download_command; 79 static uint32_t init_script_offset; 80 81 // Embedded == non posix systems 82 83 // actual init script provided by separate bt_firmware_image.c from WICED SDK 84 extern const uint8_t brcm_patchram_buf[]; 85 extern const int brcm_patch_ram_length; 86 extern const char brcm_patch_version[]; 87 88 // 89 // @note: Broadcom chips require higher UART clock for baud rate > 3000000 -> limit baud rate in hci.c 90 static void chipset_set_baudrate_command(uint32_t baudrate, uint8_t *hci_cmd_buffer){ 91 hci_cmd_buffer[0] = 0x18; 92 hci_cmd_buffer[1] = 0xfc; 93 hci_cmd_buffer[2] = 0x06; 94 hci_cmd_buffer[3] = 0x00; 95 hci_cmd_buffer[4] = 0x00; 96 little_endian_store_32(hci_cmd_buffer, 5, baudrate); 97 } 98 99 // @note: bd addr has to be set after sending init script (it might just get re-set) 100 static void chipset_set_bd_addr_command(bd_addr_t addr, uint8_t *hci_cmd_buffer){ 101 hci_cmd_buffer[0] = 0x01; 102 hci_cmd_buffer[1] = 0xfc; 103 hci_cmd_buffer[2] = 0x06; 104 reverse_bd_addr(addr, &hci_cmd_buffer[3]); 105 } 106 107 #ifdef HAVE_POSIX_FILE_IO 108 109 static const char * hcd_file_path; 110 static const char * hcd_folder_path = "."; 111 static FILE * hcd_file; 112 static char matched_file[1000]; 113 114 115 static void chipset_init(const void * config){ 116 if (hcd_file_path){ 117 log_info("chipset-bcm: init file %s", hcd_file_path); 118 } else { 119 log_info("chipset-bcm: init folder %s", hcd_folder_path); 120 } 121 send_download_command = 1; 122 init_script_offset = 0; 123 hcd_file = NULL; 124 } 125 126 static const uint8_t download_command[] = {0x2e, 0xfc, 0x00}; 127 128 static btstack_chipset_result_t chipset_next_command(uint8_t * hci_cmd_buffer){ 129 if (hcd_file == NULL){ 130 log_info("chipset-bcm: open file %s", hcd_file_path); 131 hcd_file = fopen(hcd_file_path, "rb"); 132 if (hcd_file == NULL){ 133 log_error("chipset-bcm: can't open file %s", hcd_file_path); 134 return BTSTACK_CHIPSET_NO_INIT_SCRIPT; 135 } 136 } 137 138 // send download firmware command 139 if (send_download_command){ 140 send_download_command = 0; 141 memcpy(hci_cmd_buffer, download_command, sizeof(download_command)); 142 return BTSTACK_CHIPSET_VALID_COMMAND; 143 } 144 145 // read next command, but skip download command 146 do { 147 // read command 148 size_t bytes_read = fread(hci_cmd_buffer, 1, 3, hcd_file); 149 if (bytes_read < 3){ 150 if (feof(hcd_file)) { 151 log_info("chipset-bcm: end of file, size %u", init_script_offset); 152 } else { 153 log_error("chipset-bcm: read error at %u", init_script_offset); 154 } 155 fclose(hcd_file); 156 hcd_file = NULL; 157 return BTSTACK_CHIPSET_DONE; 158 } 159 init_script_offset += 3; 160 161 // read parameters 162 int param_len = hci_cmd_buffer[2]; 163 if (param_len){ 164 bytes_read = fread(&hci_cmd_buffer[3], 1, param_len, hcd_file); 165 } 166 if (bytes_read < param_len){ 167 log_error("chipset-bcm: read error at %u", init_script_offset); 168 fclose(hcd_file); 169 hcd_file = NULL; 170 return BTSTACK_CHIPSET_DONE; 171 } 172 init_script_offset += param_len; 173 174 } while (memcmp(hci_cmd_buffer, download_command, sizeof(download_command)) == 0); 175 return BTSTACK_CHIPSET_VALID_COMMAND; 176 } 177 178 void btstack_chipset_bcm_set_hcd_file_path(const char * path){ 179 hcd_file_path = path; 180 } 181 182 void btstack_chipset_bcm_set_hcd_folder_path(const char * path){ 183 hcd_folder_path = path; 184 } 185 186 void btstack_chipset_bcm_set_device_name(const char * device_name){ 187 // ignore if file path already set 188 if (hcd_file_path) { 189 log_error("chipset-bcm: set device name called %s although path %s already set", device_name, hcd_file_path); 190 return; 191 } 192 193 // find in folder 194 tinydir_dir dir = { 0 }; 195 int res = tinydir_open(&dir, hcd_folder_path); 196 if (res < 0){ 197 log_error("chipset-bcm: could not get directory for %s", hcd_folder_path); 198 return; 199 } 200 uint16_t device_name_len = (uint16_t) strlen(device_name); 201 while (dir.has_next) { 202 tinydir_file file; 203 tinydir_readfile(&dir, &file); 204 tinydir_next(&dir); 205 // starts with $device_name? 206 if (strncasecmp(device_name, file.name, device_name_len) != 0) { 207 continue; 208 } 209 // long enough to have ".hcd" suffix 210 uint16_t filename_len = (uint16_t) strlen(file.name); 211 if (filename_len < 5) { 212 continue; 213 } 214 // check suffix 215 if (strncasecmp(".hcd", &file.name[filename_len - 4], device_name_len) == 0) { 216 btstack_strcpy(matched_file, sizeof(matched_file), hcd_folder_path); 217 btstack_strcat(matched_file, sizeof(matched_file), "/"); 218 btstack_strcat(matched_file, sizeof(matched_file), file.name); 219 hcd_file_path = matched_file; 220 break; 221 } 222 } 223 tinydir_close(&dir); 224 if (hcd_file_path == NULL) { 225 log_error("chipset-bcm: could not find .hcd that starts with %s at path %s", device_name, hcd_folder_path); 226 } 227 } 228 229 #else 230 231 static void chipset_init(const void * config){ 232 log_info("chipset-bcm: init script %s, len %u", brcm_patch_version, brcm_patch_ram_length); 233 init_script_offset = 0; 234 send_download_command = 1; 235 } 236 237 static btstack_chipset_result_t chipset_next_command(uint8_t * hci_cmd_buffer){ 238 // no initscript 239 if (brcm_patch_ram_length == 0) return BTSTACK_CHIPSET_NO_INIT_SCRIPT; 240 241 // send download firmware command 242 if (send_download_command){ 243 send_download_command = 0; 244 hci_cmd_buffer[0] = 0x2e; 245 hci_cmd_buffer[1] = 0xfc; 246 hci_cmd_buffer[2] = 0x00; 247 return BTSTACK_CHIPSET_VALID_COMMAND; 248 } 249 250 if (init_script_offset >= brcm_patch_ram_length) { 251 return BTSTACK_CHIPSET_DONE; 252 } 253 254 int cmd_len = 3 + brcm_patchram_buf[init_script_offset+2]; 255 memcpy(&hci_cmd_buffer[0], &brcm_patchram_buf[init_script_offset], cmd_len); 256 init_script_offset += cmd_len; 257 return BTSTACK_CHIPSET_VALID_COMMAND; 258 } 259 #endif 260 261 262 static btstack_chipset_t btstack_chipset_bcm = { 263 "BCM", 264 chipset_init, 265 chipset_next_command, 266 chipset_set_baudrate_command, 267 chipset_set_bd_addr_command, 268 }; 269 270 // MARK: public API 271 const btstack_chipset_t * btstack_chipset_bcm_instance(void){ 272 return &btstack_chipset_bcm; 273 } 274 275 /** 276 * @brief Enable init file - needed by btstack_chipset_bcm_download_firmware when using h5 277 * @param enabled 278 */ 279 void btstack_chipset_bcm_enable_init_script(int enabled){ 280 if (enabled){ 281 btstack_chipset_bcm.next_command = &chipset_next_command; 282 } else { 283 btstack_chipset_bcm.next_command = NULL; 284 } 285 } 286