1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11### Added 12- GAP: support coordinated private random address updates 13 14### Fixed 15- GAP: allow use of own address type different from gap_random_set_mode() incl. RPA in LE Extended Advertising 16- SM: abort pairing with invalid parameter error for encryption key size > 16 17- SM: ignore Security Request after re-encryption has started 18- ATT Server: support delayed read responses for registered services 19- ATT Server: allow to start crypto operation from delayed att read/write request 20- HFP HF: send HF Indicator update only if enabled by AG 21- HSP HS: use EV3 and 2EV3 packets for 7.5 ms voice interval 22 23### Changed 24- HCI: hci_reserved_packet_buffer and higher layer functions asserts if packet buffer is free instead of return value 25- GAP: mutual authentication for legacy secure connections to prevent BIAS attacks was made optional with 26 ENABLE_MUTUAL_AUTHENTICATION_FOR_LEGACY_SECURE_CONNECTIONS. Not needed for default encryption key size of 16 27 28 29## Release v1.6 30 31### Added 32- HCI: allow to configure Classic ACL packet types with hci_enable_acl_packet_types 33- GAP: emit generic GAP_SUBEVENT_LE_CONNECTION_COMPLETE for any LE Connection Complete 34- SM: support LE Secure Connection debug keys for testing 35- L2CAP: additional authorization_required param in l2cap_ecbm_register_service 36- GATT Client: support GATT over Enhanced LE Bearer 37- GATT Server: support GATT over Enhanced LE Bearer 38- A2DP: support SDP record without service name and/or provider 39- AVRCP: support SDP record without service name and/or provider 40- HFP: hfp_hf_create_sdp_record_with_codecs and hfp_hf_create_sdp_record_with_codecs 41- HFP: support SDP record without service name 42- HFP: support for LC3-SWB 43- SPP Server: support SDP record without service name 44- HOG Device: emit HIDS_SUBEVENT_SET_REPORT 45- HOG Device: provide report for GET REPORT operation via callback 46- SBC Codec: new interface allows for multiple instances 47- LE Device DB: le_device_db_dump dumps LTK 48- Port for Zephyr 3.x 49- Port for FreeBSD that uses kernel netgraph HCI node 50 51### Fixed 52- HCI: fix remove le device from whitelist and periodic advertiser list 53- HCI: fix restart connect with whitelist after whitelist modification 54- GAP: store classic link keys independent from peer bonding request 55- SM: directly detect invalid Public key when Controller ECC is used 56- SM: sm: only set LinkKey flag in Pairing Request/Response if BR/EDR supported locally 57- L2CAP: make l2cap_get_remote_mtu_for_local_cid available to LE-only builds 58- L2CAP: handle all signaling requests and responses in closed state 59- HFP: use 'don't care' to accept SCO connections, fixes issue on ESP32 60- HFP: fix LC3-WB init 61- HFP AG: fix setup of audio connection in service level established event 62- HFP AG: fix BCM WBS setup 63- HFP AG: allow use of mSBC in subsequent audio connections after CSVD downgrade 64- HFP AG: fix terminate held call 65- HFP HF: send 'deactivate EC/NR' if supported in AG 66- HID Device: set Report Mode as default 67- HID Host: support large HID Descriptors 68- AVDTP: limit L2CAP MTU to largest BR/EDR packet, fixes A2DP Sink role for some Samsung TV 69- AVDTP: fix Get Stream Configuration 70- AVDTP: reject suspend in state endpoint open 71- AVDTP: return error in avdtp_suspend_stream if state is not streaming 72- AVRCP: reject incoming second l2cap connection 73- AVRCP: generate command for avrcp_controller_get_element_attributes dynamically 74- SPP Server: fix SPP version in SDP record 75- GATT Client: ignore notifications/indications until re-encrypted for bonded device without ENABLE_LE_PROACTIVE_AUTHENTICATION 76- btstack_flash_bank: support alignment larger than 4 77- windows: fix timestamps in packet logs 78 79### Changed 80- HCI: simplified implicit SCO flow control 81- HCI: return ERROR_CODE_COMMAND_DISALLOWED for outgoing connections in gap_connect 82- GAP: only return status code for errors in gap_connect 83- AVRCP: shorten default SDP Service and Provider Names 84- GATT Client: emit query complete event for gatt_client_discover_characteristic_descriptors in next run loop iteration 85- HFP: report HFP Version 1.9 in SDP record 86- HID Parser: ignore Report Items without Usage 87- btstack_crypto: allow MBEDTLS config via MBEDTLS_CONFIG_FILE 88- remove old Zephyr 1.9 port 89- ports: require CMake 3.12 for CMake projects 90 91## Release v1.5.6 92 93### Added 94- HCI: HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned 95- GAP: support additional LE PHYs for scanning and outgoing connections 96- GATT Client: allow to queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response 97- GATT Client: support GATT over BR/EDR transport via gatt_client_classic_connect 98- HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED 99- HFP: allow to register custom at commands with hfp_hf_register_custom_at_command 100- HFP: experimental support for LC3-SWB from HFP SWB draft with ENABLE_HFP_SUPER_WIDE_BAND_SPEECH 101- AVRCP: support Cover Art via avrcp_cover_art_client 102- example: gatt_streamer_server and le_streamer_client report DLE and PHY changes 103- NXP: support for NXP Controller with bootloader versions v1, e.g. NXP 88W8997, and v3, e.g. NXP IW416 or IW61x 104- esp32: support esp-idf v5.x audio driver 105- esp32: warn about sdkconfig issues 106- esp32: add BTstack component config options via menuconfig 107- esp32: allow to disable default audio i2s driver via component config 108- esp32: btstack_stdio_init configures buffered output, required for stdin support 109- Port for Renesas RA6M4 with DA14531 110- Port for NXP Controller on POSIX (posix-h4-nxp) 111- Port for newer Infineon Controller on POSIX (posix-h4-bcm) that requires autobaud-mode 112 113### Fixed 114- HCI: fix set extended scan response 115- HCI: fix report of extended advertisements with data len > 31 116- HCI: fix CTKD in Initiator role over BR/EDR SC when using dedicated bonding 117- SM: fix value in SM_EVENT_NUMERIC_COMPARISON_REQUEST 118- SM: ignore Security Request during re-encryption 119- GATT Client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle 120- A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout 121- A2DP Source: a2dp_source_stream_send_media_payload was removed, use a2dp_source_stream_send_media_payload_rtp instead 122- A2DP: use samples as timestamp, fixes issue with Apple Airpods Pro 2nd Gen 123- AVDTP Source: avdtp_source_stream_send_media_payload was removed, use avdtp_source_stream_send_media_payload_rtp instead 124- AVRCP: re-register for notification 125- BNEP: validate UUID32 and UUID128 service in connect request 126- HFP: fix setup/accept of synchronous connection 127- HFP: use mandatory safe settings considering BR/EDR Secure Connections to accept synchronous connections 128- HFP: avoid SCO packet types not supported either locally or remotely 129- HFP: remove trailing newline/carriage return in custom command event 130- PBAP Client: make pbap_set_property_selector work for Pull Phonebook 131- btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS 132- esp32: fix audio power amplifier control on Lyra T v4.3 board 133- tool/convert_gatt_service: removed as GATT Service descriptions not available on Bluetooth SIG web site 134 135### Changed 136- GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE 137- GAP: use stack defaults for LE Connection Parameter Updates 138- GAP: set minimum and maximum CE length to 0 139- GAP: ENABLE_EXPLICIT_DEDICATED_BONDING_DISCONNECT disables disconnect after dedicated bonding 140- GOEP Client: support multiple instances 141- A2DP Sink: drop unused local seid argument in a2dp_sink_establish_stream 142- HFP: emit HFP_SUBEVENT_CUSTOM_AT_MESSAGE_SENT after sending custom command / unsolicited response code 143- sco_demo_util: replace hfp_msbc by hfp_codec 144- BCM: look for PatchRAM file with prefix DEVICE_NAME and extension '.hcd' 145- bluetooth: indicated identity address in resolved address type enums name 146- btstack_audio: added get_samplerate function to help with audio sample rate synchronization 147- btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE 148- esp32: drop support for Makefile projects from esp-idf 3.x 149- esp32: avoid deprecated btstack_run_loop_freertos API calls 150- esp32: use sample rate compensation in a2dp_sink_demo 151- stm32-f4discovery-cc256x: use external oscillator for better I2S clock 152- stm32-f4discovery: use sample rate compensation in a2dp_sink_demo 153 154 155## Release v1.5.5 156 157### Added 158- hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_* 159- GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0) 160- example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device 161 162### Fixed 163- GAP: reload LE Resolving List after power-cycle 164- GAP: fix setting of LE Scan Response for data that needs to be fragmented 165- SM: fix pairing process with active ATT communication 166- ESP32: fix init for BR/EDR Only mode 167- ESP32: fix audio driver for sink + source mode 168- ESP32: fixes for ESP-IDF v5.x 169- ESP32: fix compile of non-BTstack examples after adding components/btstack 170 171### Changed 172- GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle 173- SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK 174- Mesh: move GATT Services into src/mesh/gatt-service 175- LE Audio: move GATT Services into src/le-audio/gatt-service 176- libusb: improve implementation 177 178## Known Issues 179- ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x 180 181 182## Release v1.5.4 183 184### Added 185- HFP HF: send custom AT command with hfp_hf_send_at_command 186- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 187- HFP HF: provide Call Waiting information alpha field 188- HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC 189- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 190- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 191- GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter 192- GAP: support BIG with gap_big_create and gap_big_terminate 193- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 194- GAP: support Periodic Advertisement Sync Transfer 195- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 196- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 197- Support for ESP32-C3 and ESP32-S3 198 199### Fixed 200- HCI: only add paired LE devices with IRK to resolving list 201- HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist 202- GAP: use static random address after power up 203- L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 204- SM: avoid potential loop during CTKD 205 206### Changed 207- HCI Dump: provide log level to log_message implementation 208- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 209 210 211## Release v1.5.3 212 213### Added 214- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 215- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 216- HFP HF: provide Calling Line Identification alpha field 217- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 218- GOEP Server 219- Chipset: support for firmware download and configuration of Realtek Controllers 220 221### Fixed 222- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 223- GAP: fix race condition that causes duplicate authenticate request 224- SM: address update for non-resolvable private addresses 225- SM: reset state on power off transition 226- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 227- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 228- HFP: try next link setting for SCO connection failure after SCO reject errors 229- HFP AG: activate all AG indicators upon service level connection establishment 230- HFP AG: handle call termination in alerting call state 231- HFP HF: fix parsing of phone number for voice tag 232- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 233 234### Changed 235- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 236- SM: pairing events indicate if LE Secure Connection will be used 237- A2DP: new a2dp.c contains shared code of Sink and Source roles 238- A2DP Sink: automatically configure stream endpoint for outgoing connections 239- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 240- libusb: command line options to delete TLV and specify log file path 241- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 242 243## Release v1.5.2 244 245### Added 246- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 247- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 248- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 249- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 250- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 251- GATT Service: Audio Input Control Service Server (AICS 1.0) 252- GATT Service: Microphone Control Service Server (MCS 1.0) 253- GATT Service: Volume Control Service Server (VCS 1.0) 254- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 255 256### Fixed 257- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 258- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 259- GAP: disable scanning, advertising, connection before updating random address 260- GAP: fix LE Scan with whitelist 261- HFP_AG: fix tracking for call dropped during outgoing ringing 262- HFP: Free HFP Connection object on SDP error / Service not found 263- PBAP Client: emit operation complete with status OBEX_ABORTED 264 265### Changed 266- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 267- GAP: set min encryption key size during init, if supported 268- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 269- ATT Server: use uint8_t for status returns 270- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 271 272 273## Release v1.5.1 274 275### Added 276- GOEP Client: add goep_client_version_20_or_higher 277- ESP32: implement audio source 278 279### Fixed 280- PBAP Client: support disconnect while operation is ongoing 281- PBAP Client: use SRM only if GOEP v2.0 or higher connection 282- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 283- L2CAP: limit remote MTU by local tx configuration in ERTM 284 285### Changed 286- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 287- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 288- ESP32: use I2S configuration from ESP32 LyraT V4.3 289 290 291## Release v1.5.0 292 293### Added 294- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 295- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 296- HCI: hci_remove_event_handler to remove packet handler 297- hci_cmd: support variable length fields and arrayed parameters 298- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 299- GAP: gap_set_page_timeout to set Page Timeout 300- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 301- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 302- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 303- A2DP: allow to register media codec validator for sink and source with: 304 - `a2dp_sink_register_media_config_validator` 305 - `a2dp_source_register_media_config_validator` 306- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 307- OBEX: new obex_parser for chunked OBEX data 308- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 309- SM: sm_remove_event_handler to remove packet handler 310- GATT Service: Bond Management Service (BMS 1.0) Server 311- GATT Service: Microphone Control Service (MICS 1.0) Server 312- GATT Service: TX Power Service (TPS 1.0) Server 313- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 314- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 315 316### Fixed 317- A2DP Source: fix reconfigure 318- AVRCP Controller: prevent registering of notifications for unsupported events 319- RFCOMM: fixed handling of remote port configuration command 320- HFP AG: fix accept incoming connection while audio connection is established 321- PBAP Client: handle chunked vCard Listing 322- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 323- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 324- SM: support storing bonding information for devices with identical IRK but different public addresses 325- GAP: restart advertising when private address changes 326- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 327 328### Changed 329- Drop iOS support 330- HCI: provide status instead of undocumented int error code and bool for API functions 331- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 332- GAP: local name, EIR data, class of device and default link policy can be updated at any time 333- L2CAP: provide status instead of undocumented int error code and bool for API functions 334- L2CAP: remote features not required for SDP connections 335- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 336- L2CAP: drop reason parameter in l2cap_disconnect 337- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 338- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 339- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 340- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 341- RFCOMM: provide status instead of undocumented int error code and bool for API functions 342- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 343- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 344- HFP: API functions return status code if appropriate 345- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 346- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 347- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 348- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 349- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 350- AVRCP: use PANEL as default unit + subunit info 351- AVRCP Controller: automatically query supported events when registering for notifications 352- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 353- Run Loop: new functionality for HCI transport drivers and inter-process communication: 354 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 355 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 356 - *btstack_run_loop_trigger_exit*: trigger run loop exit 357- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 358- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 359 360 361## Release v1.4.1 362 363### Added 364- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 365 366### Fixed 367- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 368- GAP: avoid requesting authentication twice 369- GAP: cache own address on start advertising and connecting, provide getters 370- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 371- SM: fix race condition between local address changes and pairing procedure 372- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 373 374### Changed 375- HCI: update advertising data without stopping advertising first 376- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 377- GAP: return status for `gap_set_security_mode` 378- GAP: abort legacy pairing if Level 4 is required 379- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 380- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 381- GAP: validate minimal service security level can be reached during pairing in responder role 382- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 383- CVE-2020-26555: reject connections to and from devices with same BD ADDR 384- CVE-2020-26555: ignore NULL link key 385- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 386 387## Release v1.4 388 389### Added 390- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 391- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 392- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 393 - support sending and receiving SLIP frames for HCI H5 394 - support odd parity 395 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 396- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 397- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 398- GATT Client: Battery Service Client 399- GATT Client: Device Information Service Client 400- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 401- GATT Client: Scan Parameters Service Client 402- GATT Server: Scan Parameters Service Server 403- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 404- GAP: support sniff subrating with `gap_sniff_subrating_configure` 405- GAP: support QoS setup with `gap_qos_set` 406- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 407- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 408- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 409- AVRCP Controller: reassemble fragmented AVCTP packets 410- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 411- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 412 413### Fixed 414- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 415- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 416- GAP: allow to disable link supervision timeout 417- GAP: fix `gap_connect` after `gap_connect_cancel` 418- GAP: re-configure advertisements after power cycle 419- HCI: handle start inquiry failure 420- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 421- L2CAP: return unknown mandatory option in config response 422- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 423- AVRCP Target: fix notification changed event 424- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 425- HFP HF: fix audio connection setup if codec negotiation is supported 426- HFP HF: only emit single event for RING and AG Status updates 427- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 428 429### Changed 430- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 431 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 432 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 433 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 434 - iOS: not supported 435- Run Loop Base: functionality used in most platform run loop implementations 436 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 437 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 438- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 439 - `posix/hci_dump_posix_fs` - writes binary log file 440 - `posix/hci_dump_stdout` - log to console using printf with local system time 441 - `embedded/hci_dump_embedded_stdout` - log to console using printf 442 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 443 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 444- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 445- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 446- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 447- POSIX Ports: use new `btstack_uart_posix` implementation 448- posix-h5/posix-h5-bcm: use even parity for UART 449- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 450- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 451- GAP: only store link key if it allows requested security level 452- GAP: abort SSP pairing if MITM protection required but not possible 453- SM: start pairing as Central for already encrypted connection on Slave Security Request 454- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 455- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 456- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 457 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 458- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 459 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 460- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 461- HFP: provide acl_handle in events to identify connection 462- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 463- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 464 465 466## Release v1.3.2 467 468### Added 469- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 470- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 471- HID Host: add profile, update `hid_host_demo.c` example 472 473### Fixed 474- L2CAP: make handling of HCI disconnect more robust 475- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 476- AVRCP: fix issue when Controller and Target send at the same time 477 478### Changed 479- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 480 481 482## Release v1.3 483 484### Added 485- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 486- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 487- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 488- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 489- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 490- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 491- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 492- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 493- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 494 495### Fixed 496- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 497- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 498- HFP AG/HSP AG: avoid connecting to remote service with same role 499- A2DP Source: support multiple Stream Endpoints with different Media Codec types 500- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 501- GATT Compiler: support multiple instances of the same service 502 503### Changed 504- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 505- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 506- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 507- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 508- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 509- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 510- Ports: STM32-F103RB Nucleo + CC256x port removed 511- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 512 513 514## Release v1.2.1 515 516### Fixed 517- L2CAP: use connection handle for channel lookups 518- L2CAP: forward data only in open state 519 520### Changed 521- L2CAP: check packet size against local mtu for classic basic channels 522 523 524## Release v1.2 525 526### Fixed 527- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 528- SM: fix update of sc flag for re-encrypted connection in peripheral role 529- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 530- ESP32: fix audio sink driver 531 532### Added 533- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 534- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 535- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 536- SM: emit events for re-encryption started/complete when bonding information is available 537 538### Changed 539- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 540- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 541 542 543## Changes October 2020 544 545### Fixed 546- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 547- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 548- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 549- SM: set LinkKey flag to request CTKD if enabled 550- SM: store CTKD key with Public Identity Address 551- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 552- SM: start SMP Timeout when sending Security Request 553- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 554- HCI: fix reject of LE remote connection param request via HCI 555 556### Added 557- GAP: add `gap_get_link_key_for_bd_addr` 558- GAP: add `gap_bonded` to check if bonding information is available for active connection 559- SM: support h7 for CTKD 560 561### Changed 562- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 563- SM: block connection if encryption fails for bonded devices as Central 564- SM: support pairing as Central after failed re-encryption 565 566 567## Release v1.1 568 569### Fixed 570- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 571 572### Added 573 574### Changed 575 576 577## Changes September 2020 578 579### Fixed 580- HFP: fix parsing of ranges e.g. in +CIND responses 581- AVDTP, AVRCP: fix bugs due to transaction id overrun 582- A2DP Source: fix issues with stream configuration by sink 583- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 584 585### Added 586- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 587- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 588 589### Changed 590- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 591- HSP, HFP: allow to configure usable SCO packet types 592- cc256x: update CC256xC init script to v1.4 593- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 594 595## Changes August 2020 596 597### Fixed 598- ESP32: fix authentication for incoming Secure Connections 599- AVDTP: Fix forwarding of Delay reports 600- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 601- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 602 603### Added 604- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 605- GAP: request role change for classic connection via `gap_request_role` 606- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 607- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 608- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 609- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 610- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 611- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 612 613### Changed 614- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 615- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 616- example/hid_host_demo: try to become master for incoming connections 617- btstack_run_loop: use btstack_assert instead of local while(true) 618- att_db_util: allow to reset att_db via `att_db_util_init` 619 620## Changes July 2020 621 622### Fixed 623- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 624- AVDTP: handle concurrent signaling establishment with reject and retry 625 626### Added 627- example/hid_host_demo: support reconnect from HID device 628- Crypto: support software AES128 for AES-CCM operations 629- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 630- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 631- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 632- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 633- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 634 635### Changed 636- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 637 638 639## Changes June 2020 640 641### Fixed 642- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 643- SM: Fix validation of confirm value for secure connection Passkey entry 644- AVRCP: handle concurrent signaling establishment with reject and retry 645 646### Added 647- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 648- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 649- Windows port for Dialog DA14585 connected via serial port 650 651## Changes 652- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 653 654## Changes May 2020 655 656### Fixed 657- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 658- pbap_client: fix PBAP UUID len on connect message 659- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 660- A2DP Source: only connect to remote sink stream endpoints 661- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 662- hsp_hs: fix disconnect if audio not connected 663- hsp_ag: fix accept incoming connection 664 665### Added 666- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 667- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 668- cc256x: allow to specify power vector for each modulation type 669- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 670- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 671- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 672 673### Changed 674- L2CAP ERTM: send extended features request only once per HCI connection 675 676 677## Changes April 2020 678 679### Fixed 680- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 681- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 682 683### Added 684- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 685- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 686- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 687 688### Changed 689- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 690- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 691- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 692 693 694## Changes March 2020 695 696### Fixed 697- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 698- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 699 700### Added 701- GATT Client: allow to register for any notification/indication and/or any connection 702- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 703- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 704- btstack_util: added btstack_replace_bd_addr_placeholder 705 706### Changed 707- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 708- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 709 710 711## Changes Februar 2020 712 713### Fixed 714- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 715- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 716 717### Changed 718- hid_host_mode: allow sniff mode 719 720### Added 721- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 722 723 724## Changes January 2020 725 726### Fixed 727- L2CAP ERTM: avoid read-after-free on decline of incoming connection 728- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 729- att_db_util: fix realloc of att db buffer for large attributes 730- btstack_tlv_posix: only keep last value in memory, fix delete operation 731- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 732 733### Added 734- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 735- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 736- ATT Server: validate request pdu length 737 738### Changed 739- Crypto: update AES-CMAC implementation to access all message bytes sequentially 740 741 742## Changes December 2019 743 744### Fixed 745- example/pan_lwip_http_server: use Network Access Point, CoD 746- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 747 748### Added 749 750### Changed 751- Updated CC256x initscript: CC256xC v1.3 752- ESP32: add CMake project files 753 754 755## Changes November 2019 756 757### Fixed 758- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 759- L2CAP: send LE Data Channel SDUs round robin with other data 760- L2CAP ERTM: send ERTM I-frames round robin with other data 761 762### Added 763- ATT Server: return error if request to send now for Notification or Indication already registered 764- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 765- btstack_run_loop_remove: return bool true if timer/data source was removed 766- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 767- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 768- lwip: add download test files to http server demo 769 770### Changed 771- Linked List: return bool true if item was removed 772 773 774## Changes October 2019 775 776### Fixed 777 778### Added 779- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 780- provide `btstack_assert(condition)` 781- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 782 783### Changed 784- libusb and posix ports: store bonding information in TLV 785 786 787## Changes September 2019 788 789### Fixed 790- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 791- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 792- GATT Client: allow Write Without Response independent of other requests 793 794### Added 795- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 796- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 797 798### Changed 799- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 800- bluetooth.h: extract internal defintitions to respective protocol layers 801- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 802 803 804## Changes August 2019 805 806### Fixed 807- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 808- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 809- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 810- L2CAP ERTM: stop timers on disconnect 811- L2CAP ERTM: fix sending of segmented SDUs 812- L2CAP ERTM: handle unsupported Information Response 813- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 814 815### Added 816- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 817 818## Changed 819- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 820- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 821- POSIX: use monotonic clock as timebase if available 822- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 823- HCI: Read Encryption Key Size after encryption was enabled 824- Errata 11838: 825 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 826 - GAP: validate encryption key size to emit GAP Security Levels 827 828## Changes July 2019 829 830### Fixed 831- SM: Fixed regression introduced in f3582630 832- L2CAP: avoid reading l2cap signaling command len out of bounds 833- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 834 835### Changed 836- SM: Start encryption upon receiving slave securiy request if bonded 837- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 838 839--- 840 841## Changes June 2019 842 843### Changed 844- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 845- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 846- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate support for GATT over BR/EDR 847 848### Fixed 849- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 850- libusb: avoid use-after-free for SCO packets on disconnect 851 852### Added 853- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 854- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 855- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 856 857--- 858 859## Changes May 2019 860 861### Changed 862- ESP32: Configure SCO over HCI after power up 863- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 864 is defined, an explicit delete field is used to indicate an invalid entry. 865 866### Fixed 867- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 868 869### Added 870- gatt_client: emit query complete event for signed write operation 871- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 872 873--- 874 875## Changes April 2019 876 877### Changed 878- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 879 880### Fixed 881- hci: pad LE Scan response with zeroes 882- SM: store local CSRK 883- ATT DB: call write callback for validated signed writes 884- ATT Server: abort signed write validation on incoming new request 885- Bluetooth SIG web scraping tools updated 886- libusb: compiles for FreeBSD 887 888### Added 889 890--- 891 892## Changes March 2019 893 894### Changed 895- use Makefile for stm32-f4discovery-cc256x port 896- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 897 898### Fixed 899- SM: Use provided authentication requirements in slave security request 900 901### Added 902- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 903- SM: Track if connection encryption is based on LE Secure Connection pairing 904- ATT DB: Validate if connection encrypted is based on SC if requested 905- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 906- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 907- ESP32: erase nvs flash is newer nvs version found 908- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 909- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 910 911## Changes February 2019 912 913### Changed 914- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 915- btstack_audio: split interface into sink and source 916 917### Fixed 918- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 919- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 920 921### Added 922- example/a2dp_sink_demo: add target role, support volume control on both devices 923- example/audio_duplex: playback audio audio source on audio sink (test audio path) 924- btstack_audio_embedded: implement audio source path 925 926--- 927 928## Changes January 2019 929 930### Changed 931- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 932- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 933 934### Added 935- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 936- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 937- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 938- ad_parser: validate data element length fields in ad_iterator_has_more 939- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 940 941### Fixed 942- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 943- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 944- Crypto: directly process queued crypto operation on HCI result 945 946--- 947 948## Changes December 2018 949 950### Added 951- SM: generate and store ER / IR keys in TLV, unless manually set by application 952- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 953 954### Fixed 955- SM: fix internal buffer overrun during random address generation 956 957## Changes November 2018 958 959### Added 960- GAP: gap_le_connection_interval provides connection interval for conn handle 961- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 962- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 963- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 964- SM: generate and store ER / IR keys in TLV, unless manually set by application 965 966### Fixed 967- SM: prevent random address updates if gap_random_address_set was used 968- SM: fix internal buffer overrun that can cause storing of bonding information to fail 969- SM: ignore Slave Security Request after sending own Pairing Request 970- L2CAP: fix use after free on disconnect if ERTM is enabled 971- HFP: Handle multiple commands/responses in single RFCOMM packet 972- Memory Pools: clear all buffers before use 973 974--- 975 976## Changes October 2018 977 978### Added 979- SDP Server: queue incoming connections when already connected instead of rejecting them 980- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 981- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 982 983### Fixed 984- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 985- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 986- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 987- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 988- L2CAP ERTM: fix outgoing fragment management 989- HFP: decline incoming RFCOMM connection after outgoing connection was started 990- AVRCP: fix crash on disconnect of connection established by remote 991 992--- 993 994## Changes September 2018 995 996### Fixed 997- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 998- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 999- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 1000- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 1001- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 1002- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 1003- RFCOMM: Avoid use-after-free on channel finalize 1004- GATT Client: stop timer on disconnect - fixes use after free / crash 1005 1006### Added 1007- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 1008- 3rd-party: yxml is used for PBAP vCard list parsing 1009- cc256xC: new v1.1 init scripts 1010 1011--- 1012 1013## Changes August 2018 1014 1015### Added 1016- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 1017 1018### Fixed 1019- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 1020- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 1021- SM: drop LTK flag from Pairing Response for Secure Connections 1022- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 1023 1024## Changes June 2018 1025 1026### Added 1027- btstack_audio.h: application level API for audio playback and recording 1028- embedded/hal_audio.h: low-level API for audio playback and recording 1029- HID Device: hid_device_connect(..) function 1030- ESP32: implement hal_audio 1031- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 1032- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 1033 1034### Changed 1035- Errata 10734: 1036 - SM: Generate new EC Public Keypair after each pairing 1037 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 1038- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 1039- windows: ignore virtual Bluetooth adapter provided by VMware 1040- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 1041 1042--- 1043 1044## Changes June 2018 1045 1046### Fixed 1047- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 1048- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 1049- AVRCP Controller: fix parsing of now playing info 1050 1051### Changed 1052- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 1053 1054### Added 1055- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 1056 1057--- 1058 1059## Changes May 2018 1060 1061### Added 1062- GAP: re-encrypt outgoing connection if bonded 1063- ATT Server: wait until re-encryption is complete 1064- GATT Client: wait until re-encryption is complete 1065- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 1066- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 1067 1068### Changed 1069- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 1070 1071### Fixed 1072- SM: Fix LE Secure Connection pairing in Central role 1073- le_device_db_tlv: fix seq nr management 1074- SM: improve le_device_db lookup and storing of IRK 1075- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 1076- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 1077 1078--- 1079 1080## Changes April 2018 1081 1082### Added 1083- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 1084- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 1085- Embedded: support btstack_stdin via SEGGER RTT 1086 1087### Changed 1088- att_db_util: added security requirement arguments to characteristic creators 1089- SM: use btstack_crypto for cryptographpic functions 1090- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 1091 1092### Fixed 1093- HFP: fix answer call command 1094- HCI: fix buffer overrun in gap_inquiry_explode 1095- SDP: free service record item on sdp_unregister_service 1096 1097## Changes March 2018 1098 1099### Added 1100- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 1101- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 1102- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 1103 1104### Fixed 1105- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 1106- HSP HS: accept incomming SCO connection 1107- SM: fix iteration over LE Device DB entries for bonding and address resolving 1108- SM: store pairing information only if both devices have requested bonding 1109 1110--- 1111 1112## Changes February 2018 1113 1114### Added 1115- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 1116- SM: new event SM_EVENT_PAIRING_COMPLETE 1117- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 1118- GAP: add gap_delete_all_link_keys 1119 1120### Changed 1121- GATT Client: round robin for multiple connections 1122- ATT Dispatch: round robin for ATT Server & GATT Client 1123- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 1124- btstack_link_key_db: addition functions for link key iteration 1125- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 1126- CSR: set all keys in psram instead of default 1127 1128### Fixed 1129- tc3556x: fix startup after baud rate change 1130 1131--- 1132 1133## Changes January 2018 1134 1135### Added 1136- Port for Windows with Zephyr HCI Firmware connected via serial port 1137- em9304: upload patch containers during HCI bootup 1138- Makefile for STM32-F4Discovery port 1139- support for console out via SEGGER RTT 1140- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 1141- LE Streamer Client can send as fast as possbile as well 1142- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 1143 1144### Changed 1145- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 1146- GAP: gap_set_connection_parameters includes scan interval and window params 1147- GATT Client: GATT_EVENT_MTU indicates max MTU 1148- ATT DB Util: attribute handle is returned for new Services and Characteristics 1149 1150### Fixed 1151- Windows: retry serial port operations if not all bytes have been read/written 1152- HFP: avoid buffer overflows setting up messages 1153- SBC Decoder: improved error handling for invalid SBC audio data 1154- GAP: fix Connection Parameter Response in Central role 1155- ATT DB Util: update pointer to database in case of realloc 1156- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 1157- GAP: release HCI Connnection after gap_le_conne 1158- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 1159 1160--- 1161 1162## Changes December 2017 1163 1164### Added 1165- Introduced btstack_network.h network interface abstraction 1166- btstack_network_posix implementation using Linux tun/tap interface 1167- WICED: support for btstack_stdin (HAVE_STDIN) 1168- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 1169- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 1170- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 1171- LE Device DB TLV: overwrite oldest entry if no free entries available 1172- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 1173- Example/hid_host_demo with HID parser and support for basic US keyboard layout 1174- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 1175- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 1176 1177### Changed 1178- panu_demo: uses btstack_network.h now 1179- WICED: configure printf to replace Linefeed with CRLF 1180- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1181 1182### Fixed 1183- RFCOMM: support connection requests during connection failure 1184- L2CAP: support connection requests during connection failure 1185- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1186- HCI: avoid double free during halting 1187- SM: fixed reconnect using legacy pairing in slave role 1188 1189 1190