1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11### Added 12- HFP HF: send custom AT command with hfp_hf_send_at_command 13- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 14- HFP HF: provide Call Waiting information alpha field 15- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 16- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 17- GAP: support BIG with gap_big_create and gap_big_terminate 18- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 19- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 20- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 21 22### Fixed 23- HCI: only add paired LE devices with IRK to resolving list 24- GAP: use static random address after power up 25 26### Changed 27- HCI Dump: provide log level to log_message implementation 28- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 29 30 31## Release v1.5.3 32 33### Added 34- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 35- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 36- HFP HF: provide Calling Line Identification alpha field 37- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 38- GOEP Server 39- Chipset: support for firmware download and configuration of Realtek Controllers 40 41### Fixed 42- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 43- GAP: fix race condition that causes duplicate authenticate request 44- SM: address update for non-resolvable private addresses 45- SM: reset state on power off transition 46- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 47- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 48- HFP: try next link setting for SCO connection failure after SCO reject errors 49- HFP AG: activate all AG indicators upon service level connection establishment 50- HFP AG: handle call termination in alerting call state 51- HFP HF: fix parsing of phone number for voice tag 52- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 53 54### Changed 55- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 56- SM: pairing events indicate if LE Secure Connection will be used 57- A2DP: new a2dp.c contains shared code of Sink and Source roles 58- A2DP Sink: automatically configure stream endpoint for outgoing connections 59- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 60- libusb: command line options to delete TLV and specify log file path 61- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 62 63## Release v1.5.2 64 65### Added 66- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 67- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 68- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 69- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 70- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 71- GATT Service: Audio Input Control Service Server (AICS 1.0) 72- GATT Service: Microphone Control Service Server (MCS 1.0) 73- GATT Service: Volume Control Service Server (VCS 1.0) 74- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 75 76### Fixed 77- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 78- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 79- GAP: disable scanning, advertising, connection before updating random address 80- GAP: fix LE Scan with whitelist 81- HFP_AG: fix tracking for call dropped during outgoing ringing 82- HFP: Free HFP Connection object on SDP error / Service not found 83- PBAP Client: emit operation complete with status OBEX_ABORTED 84 85### Changed 86- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 87- GAP: set min encryption key size during init, if supported 88- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 89- ATT Server: use uint8_t for status returns 90- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 91 92 93## Release v1.5.1 94 95### Added 96- GOEP Client: add goep_client_version_20_or_higher 97- ESP32: implement audio source 98 99### Fixed 100- PBAP Client: support disconnect while operation is ongoing 101- PBAP Client: use SRM only if GOEP v2.0 or higher connection 102- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 103- L2CAP: limit remote MTU by local tx configuration in ERTM 104 105### Changed 106- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 107- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 108- ESP32: use I2S configuration from ESP32 LyraT V4.3 109 110 111## Release v1.5.0 112 113### Added 114- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 115- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 116- HCI: hci_remove_event_handler to remove packet handler 117- hci_cmd: support variable length fields and arrayed parameters 118- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 119- GAP: gap_set_page_timeout to set Page Timeout 120- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 121- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 122- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 123- A2DP: allow to register media codec validator for sink and source with: 124 - `a2dp_sink_register_media_config_validator` 125 - `a2dp_source_register_media_config_validator` 126- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 127- OBEX: new obex_parser for chunked OBEX data 128- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 129- SM: sm_remove_event_handler to remove packet handler 130- GATT Service: Bond Management Service (BMS 1.0) Server 131- GATT Service: Microphone Control Service (MICS 1.0) Server 132- GATT Service: TX Power Service (TPS 1.0) Server 133- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 134- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 135 136### Fixed 137- A2DP Source: fix reconfigure 138- AVRCP Controller: prevent registering of notifications for unsupported events 139- RFCOMM: fixed handling of remote port configuration command 140- HFP AG: fix accept incoming connection while audio connection is established 141- PBAP Client: handle chunked vCard Listing 142- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 143- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 144- SM: support storing bonding information for devices with identical IRK but different public addresses 145- GAP: restart advertising when private address changes 146- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 147 148### Changed 149- Drop iOS support 150- HCI: provide status instead of undocumented int error code and bool for API functions 151- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 152- GAP: local name, EIR data, class of device and default link policy can be updated at any time 153- L2CAP: provide status instead of undocumented int error code and bool for API functions 154- L2CAP: remote features not required for SDP connections 155- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 156- L2CAP: drop reason parameter in l2cap_disconnect 157- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 158- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 159- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 160- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 161- RFCOMM: provide status instead of undocumented int error code and bool for API functions 162- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 163- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 164- HFP: API functions return status code if appropriate 165- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 166- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 167- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 168- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 169- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 170- AVRCP: use PANEL as default unit + subunit info 171- AVRCP Controller: automatically query supported events when registering for notifications 172- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 173- Run Loop: new functionality for HCI transport drivers and inter-process communication: 174 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 175 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 176 - *btstack_run_loop_trigger_exit*: trigger run loop exit 177- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 178- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 179 180 181## Release v1.4.1 182 183### Added 184- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 185 186### Fixed 187- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 188- GAP: avoid requesting authentication twice 189- GAP: cache own address on start advertising and connecting, provide getters 190- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 191- SM: fix race condition between local address changes and pairing procedure 192- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 193 194### Changed 195- HCI: update advertising data without stopping advertising first 196- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 197- GAP: return status for `gap_set_security_mode` 198- GAP: abort legacy pairing if Level 4 is required 199- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 200- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 201- GAP: validate minimal service security level can be reached during pairing in responder role 202- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 203- CVE-2020-26555: reject connections to and from devices with same BD ADDR 204- CVE-2020-26555: ignore NULL link key 205- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 206 207## Release v1.4 208 209### Added 210- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 211- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 212- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 213 - support sending and receiving SLIP frames for HCI H5 214 - support odd parity 215 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 216- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 217- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 218- GATT Client: Battery Service Client 219- GATT Client: Device Information Service Client 220- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 221- GATT Client: Scan Parameters Service Client 222- GATT Server: Scan Parameters Service Server 223- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 224- GAP: support sniff subrating with `gap_sniff_subrating_configure` 225- GAP: support QoS setup with `gap_qos_set` 226- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 227- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 228- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 229- AVRCP Controller: reassemble fragmented AVCTP packets 230- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 231- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 232 233### Fixed 234- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 235- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 236- GAP: allow to disable link supervision timeout 237- GAP: fix `gap_connect` after `gap_connect_cancel` 238- GAP: re-configure advertisements after power cycle 239- HCI: handle start inquiry failure 240- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 241- L2CAP: return unknown mandatory option in config response 242- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 243- AVRCP Target: fix notification changed event 244- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 245- HFP HF: fix audio connection setup if codec negotiation is supported 246- HFP HF: only emit single event for RING and AG Status updates 247- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 248 249### Changed 250- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 251 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 252 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 253 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 254 - iOS: not supported 255- Run Loop Base: functionality used in most platform run loop implementations 256 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 257 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 258- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 259 - `posix/hci_dump_posix_fs` - writes binary log file 260 - `posix/hci_dump_stdout` - log to console using printf with local system time 261 - `embedded/hci_dump_embedded_stdout` - log to console using printf 262 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 263 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 264- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 265- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 266- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 267- POSIX Ports: use new `btstack_uart_posix` implementation 268- posix-h5/posix-h5-bcm: use even parity for UART 269- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 270- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 271- GAP: only store link key if it allows requested security level 272- GAP: abort SSP pairing if MITM protection required but not possible 273- SM: start pairing as Central for already encrypted connection on Slave Security Request 274- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 275- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 276- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 277 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 278- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 279 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 280- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 281- HFP: provide acl_handle in events to identify connection 282- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 283- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 284 285 286## Release v1.3.2 287 288### Added 289- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 290- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 291- HID Host: add profile, update `hid_host_demo.c` example 292 293### Fixed 294- L2CAP: make handling of HCI disconnect more robust 295- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 296- AVRCP: fix issue when Controller and Target send at the same time 297 298### Changed 299- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 300 301 302## Release v1.3 303 304### Added 305- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 306- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 307- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 308- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 309- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 310- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 311- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 312- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 313- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 314 315### Fixed 316- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 317- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 318- HFP AG/HSP AG: avoid connecting to remote service with same role 319- A2DP Source: support multiple Stream Endpoints with different Media Codec types 320- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 321- GATT Compiler: support multiple instances of the same service 322 323### Changed 324- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 325- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 326- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 327- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 328- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 329- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 330- Ports: STM32-F103RB Nucleo + CC256x port removed 331- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 332 333 334## Release v1.2.1 335 336### Fixed 337- L2CAP: use connection handle for channel lookups 338- L2CAP: forward data only in open state 339 340### Changed 341- L2CAP: check packet size against local mtu for classic basic channels 342 343 344## Release v1.2 345 346### Fixed 347- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 348- SM: fix update of sc flag for re-encrypted connection in peripheral role 349- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 350- ESP32: fix audio sink driver 351 352### Added 353- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 354- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 355- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 356- SM: emit events for re-encryption started/complete when bonding information is available 357 358### Changed 359- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 360- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 361 362 363## Changes October 2020 364 365### Fixed 366- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 367- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 368- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 369- SM: set LinkKey flag to request CTKD if enabled 370- SM: store CTKD key with Public Identity Address 371- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 372- SM: start SMP Timeout when sending Security Request 373- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 374- HCI: fix reject of LE remote connection param request via HCI 375 376### Added 377- GAP: add `gap_get_link_key_for_bd_addr` 378- GAP: add `gap_bonded` to check if bonding information is available for active connection 379- SM: support h7 for CTKD 380 381### Changed 382- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 383- SM: block connection if encryption fails for bonded devices as Central 384- SM: support pairing as Central after failed re-encryption 385 386 387## Release v1.1 388 389### Fixed 390- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 391 392### Added 393 394### Changed 395 396 397## Changes September 2020 398 399### Fixed 400- HFP: fix parsing of ranges e.g. in +CIND responses 401- AVDTP, AVRCP: fix bugs due to transaction id overrun 402- A2DP Source: fix issues with stream configuration by sink 403- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 404 405### Added 406- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 407- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 408 409### Changed 410- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 411- HSP, HFP: allow to configure usable SCO packet types 412- cc256x: update CC256xC init script to v1.4 413- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 414 415## Changes August 2020 416 417### Fixed 418- ESP32: fix authentication for incoming Secure Connections 419- AVDTP: Fix forwarding of Delay reports 420- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 421- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 422 423### Added 424- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 425- GAP: request role change for classic connection via `gap_request_role` 426- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 427- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 428- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 429- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 430- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 431- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 432 433### Changed 434- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 435- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 436- example/hid_host_demo: try to become master for incoming connections 437- btstack_run_loop: use btstack_assert instead of local while(true) 438- att_db_util: allow to reset att_db via `att_db_util_init` 439 440## Changes July 2020 441 442### Fixed 443- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 444- AVDTP: handle concurrent signaling establishment with reject and retry 445 446### Added 447- example/hid_host_demo: support reconnect from HID device 448- Crypto: support software AES128 for AES-CCM operations 449- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 450- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 451- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 452- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 453- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 454 455### Changed 456- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 457 458 459## Changes June 2020 460 461### Fixed 462- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 463- SM: Fix validation of confirm value for secure connection Passkey entry 464- AVRCP: handle concurrent signaling establishment with reject and retry 465 466### Added 467- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 468- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 469- Windows port for Dialog DA14585 connected via serial port 470 471## Changes 472- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 473 474## Changes May 2020 475 476### Fixed 477- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 478- pbap_client: fix PBAP UUID len on connect message 479- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 480- A2DP Source: only connect to remote sink stream endpoints 481- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 482- hsp_hs: fix disconnect if audio not connected 483- hsp_ag: fix accept incoming connection 484 485### Added 486- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 487- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 488- cc256x: allow to specify power vector for each modulation type 489- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 490- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 491- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 492 493### Changed 494- L2CAP ERTM: send extended features request only once per HCI connection 495 496 497## Changes April 2020 498 499### Fixed 500- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 501- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 502 503### Added 504- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 505- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 506- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 507 508### Changed 509- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 510- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 511- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 512 513 514## Changes March 2020 515 516### Fixed 517- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 518- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 519 520### Added 521- GATT Client: allow to register for any notification/indication and/or any connection 522- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 523- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 524- btstack_util: added btstack_replace_bd_addr_placeholder 525 526### Changed 527- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 528- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 529 530 531## Changes Februar 2020 532 533### Fixed 534- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 535- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 536 537### Changed 538- hid_host_mode: allow sniff mode 539 540### Added 541- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 542 543 544## Changes January 2020 545 546### Fixed 547- L2CAP ERTM: avoid read-after-free on decline of incoming connection 548- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 549- att_db_util: fix realloc of att db buffer for large attributes 550- btstack_tlv_posix: only keep last value in memory, fix delete operation 551- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 552 553### Added 554- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 555- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 556- ATT Server: validate request pdu length 557 558### Changed 559- Crypto: update AES-CMAC implementation to access all message bytes sequentially 560 561 562## Changes December 2019 563 564### Fixed 565- example/pan_lwip_http_server: use Network Access Point, CoD 566- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 567 568### Added 569 570### Changed 571- Updated CC256x initscript: CC256xC v1.3 572- ESP32: add CMake project files 573 574 575## Changes November 2019 576 577### Fixed 578- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 579- L2CAP: send LE Data Channel SDUs round robin with other data 580- L2CAP ERTM: send ERTM I-frames round robin with other data 581 582### Added 583- ATT Server: return error if request to send now for Notification or Indication already registered 584- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 585- btstack_run_loop_remove: return bool true if timer/data source was removed 586- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 587- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 588- lwip: add download test files to http server demo 589 590### Changed 591- Linked List: return bool true if item was removed 592 593 594## Changes October 2019 595 596### Fixed 597 598### Added 599- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 600- provide `btstack_assert(condition)` 601- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 602 603### Changed 604- libusb and posix ports: store bonding information in TLV 605 606 607## Changes September 2019 608 609### Fixed 610- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 611- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 612- GATT Client: allow Write Without Response independent of other requests 613 614### Added 615- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 616- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 617 618### Changed 619- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 620- bluetooth.h: extract internal defintitions to respective protocol layers 621- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 622 623 624## Changes August 2019 625 626### Fixed 627- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 628- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 629- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 630- L2CAP ERTM: stop timers on disconnect 631- L2CAP ERTM: fix sending of segmented SDUs 632- L2CAP ERTM: handle unsupported Information Response 633- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 634 635### Added 636- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 637 638## Changed 639- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 640- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 641- POSIX: use monotonic clock as timebase if available 642- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 643- HCI: Read Encryption Key Size after encryption was enabled 644- Errata 11838: 645 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 646 - GAP: validate encryption key size to emit GAP Security Levels 647 648## Changes July 2019 649 650### Fixed 651- SM: Fixed regression introduced in f3582630 652- L2CAP: avoid reading l2cap signaling command len out of bounds 653- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 654 655### Changed 656- SM: Start encryption upon receiving slave securiy request if bonded 657- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 658 659--- 660 661## Changes June 2019 662 663### Changed 664- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 665- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 666- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR 667 668### Fixed 669- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 670- libusb: avoid use-after-free for SCO packets on disconnect 671 672### Added 673- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 674- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 675- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 676 677--- 678 679## Changes May 2019 680 681### Changed 682- ESP32: Configure SCO over HCI after power up 683- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 684 is defined, an explicit delete field is used to indicate an invalid entry. 685 686### Fixed 687- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 688 689### Added 690- gatt_client: emit query complete event for signed write operation 691- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 692 693--- 694 695## Changes April 2019 696 697### Changed 698- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 699 700### Fixed 701- hci: pad LE Scan response with zeroes 702- SM: store local CSRK 703- ATT DB: call write callback for validated signed writes 704- ATT Server: abort signed write validation on incoming new request 705- Bluetooth SIG web scraping tools updated 706- libusb: compiles for FreeBSD 707 708### Added 709 710--- 711 712## Changes March 2019 713 714### Changed 715- use Makefile for stm32-f4discovery-cc256x port 716- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 717 718### Fixed 719- SM: Use provided authentication requirements in slave security request 720 721### Added 722- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 723- SM: Track if connection encryption is based on LE Secure Connection pairing 724- ATT DB: Validate if connection encrypted is based on SC if requested 725- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 726- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 727- ESP32: erase nvs flash is newer nvs version found 728- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 729- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 730 731## Changes February 2019 732 733### Changed 734- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 735- btstack_audio: split interface into sink and source 736 737### Fixed 738- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 739- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 740 741### Added 742- example/a2dp_sink_demo: add target role, support volume control on both devices 743- example/audio_duplex: playback audio audio source on audio sink (test audio path) 744- btstack_audio_embedded: implement audio source path 745 746--- 747 748## Changes January 2019 749 750### Changed 751- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 752- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 753 754### Added 755- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 756- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 757- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 758- ad_parser: validate data element length fields in ad_iterator_has_more 759- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 760 761### Fixed 762- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 763- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 764- Crypto: directly process queued crypto operation on HCI result 765 766--- 767 768## Changes December 2018 769 770### Added 771- SM: generate and store ER / IR keys in TLV, unless manually set by application 772- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 773 774### Fixed 775- SM: fix internal buffer overrun during random address generation 776 777## Changes November 2018 778 779### Added 780- GAP: gap_le_connection_interval provides connection interval for conn handle 781- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 782- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 783- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 784- SM: generate and store ER / IR keys in TLV, unless manually set by application 785 786### Fixed 787- SM: prevent random address updates if gap_random_address_set was used 788- SM: fix internal buffer overrun that can cause storing of bonding information to fail 789- SM: ignore Slave Security Request after sending own Pairing Request 790- L2CAP: fix use after free on disconnect if ERTM is enabled 791- HFP: Handle multiple commands/responses in single RFCOMM packet 792- Memory Pools: clear all buffers before use 793 794--- 795 796## Changes October 2018 797 798### Added 799- SDP Server: queue incoming connections when already connected instead of rejecting them 800- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 801- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 802 803### Fixed 804- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 805- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 806- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 807- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 808- L2CAP ERTM: fix outgoing fragment management 809- HFP: decline incoming RFCOMM connection after outgoing connection was started 810- AVRCP: fix crash on disconnect of connection established by remote 811 812--- 813 814## Changes September 2018 815 816### Fixed 817- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 818- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 819- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 820- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 821- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 822- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 823- RFCOMM: Avoid use-after-free on channel finalize 824- GATT Client: stop timer on disconnect - fixes use after free / crash 825 826### Added 827- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 828- 3rd-party: yxml is used for PBAP vCard list parsing 829- cc256xC: new v1.1 init scripts 830 831--- 832 833## Changes August 2018 834 835### Added 836- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 837 838### Fixed 839- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 840- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 841- SM: drop LTK flag from Pairing Response for Secure Connections 842- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 843 844## Changes June 2018 845 846### Added 847- btstack_audio.h: application level API for audio playback and recording 848- embedded/hal_audio.h: low-level API for audio playback and recording 849- HID Device: hid_device_connect(..) function 850- ESP32: implement hal_audio 851- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 852- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 853 854### Changed 855- Errata 10734: 856 - SM: Generate new EC Public Keypair after each pairing 857 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 858- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 859- windows: ignore virtual Bluetooth adapter provided by VMware 860- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 861 862--- 863 864## Changes June 2018 865 866### Fixed 867- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 868- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 869- AVRCP Controller: fix parsing of now playing info 870 871### Changed 872- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 873 874### Added 875- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 876 877--- 878 879## Changes May 2018 880 881### Added 882- GAP: re-encrypt outgoing connection if bonded 883- ATT Server: wait until re-encryption is complete 884- GATT Client: wait until re-encryption is complete 885- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 886- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 887 888### Changed 889- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 890 891### Fixed 892- SM: Fix LE Secure Connection pairing in Central role 893- le_device_db_tlv: fix seq nr management 894- SM: improve le_device_db lookup and storing of IRK 895- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 896- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 897 898--- 899 900## Changes April 2018 901 902### Added 903- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 904- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 905- Embedded: support btstack_stdin via SEGGER RTT 906 907### Changed 908- att_db_util: added security requirement arguments to characteristic creators 909- SM: use btstack_crypto for cryptographpic functions 910- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 911 912### Fixed 913- HFP: fix answer call command 914- HCI: fix buffer overrun in gap_inquiry_explode 915- SDP: free service record item on sdp_unregister_service 916 917## Changes March 2018 918 919### Added 920- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 921- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 922- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 923 924### Fixed 925- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 926- HSP HS: accept incomming SCO connection 927- SM: fix iteration over LE Device DB entries for bonding and address resolving 928- SM: store pairing information only if both devices have requested bonding 929 930--- 931 932## Changes February 2018 933 934### Added 935- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 936- SM: new event SM_EVENT_PAIRING_COMPLETE 937- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 938- GAP: add gap_delete_all_link_keys 939 940### Changed 941- GATT Client: round robin for multiple connections 942- ATT Dispatch: round robin for ATT Server & GATT Client 943- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 944- btstack_link_key_db: addition functions for link key iteration 945- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 946- CSR: set all keys in psram instead of default 947 948### Fixed 949- tc3556x: fix startup after baud rate change 950 951--- 952 953## Changes January 2018 954 955### Added 956- Port for Windows with Zephyr HCI Firmware connected via serial port 957- em9304: upload patch containers during HCI bootup 958- Makefile for STM32-F4Discovery port 959- support for console out via SEGGER RTT 960- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 961- LE Streamer Client can send as fast as possbile as well 962- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 963 964### Changed 965- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 966- GAP: gap_set_connection_parameters includes scan interval and window params 967- GATT Client: GATT_EVENT_MTU indicates max MTU 968- ATT DB Util: attribute handle is returned for new Services and Characteristics 969 970### Fixed 971- Windows: retry serial port operations if not all bytes have been read/written 972- HFP: avoid buffer overflows setting up messages 973- SBC Decoder: improved error handling for invalid SBC audio data 974- GAP: fix Connection Parameter Response in Central role 975- ATT DB Util: update pointer to database in case of realloc 976- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 977- GAP: release HCI Connnection after gap_le_conne 978- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 979 980--- 981 982## Changes December 2017 983 984### Added 985- Introduced btstack_network.h network interface abstraction 986- btstack_network_posix implementation using Linux tun/tap interface 987- WICED: support for btstack_stdin (HAVE_STDIN) 988- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 989- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 990- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 991- LE Device DB TLV: overwrite oldest entry if no free entries available 992- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 993- Example/hid_host_demo with HID parser and support for basic US keyboard layout 994- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 995- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 996 997### Changed 998- panu_demo: uses btstack_network.h now 999- WICED: configure printf to replace Linefeed with CRLF 1000- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1001 1002### Fixed 1003- RFCOMM: support connection requests during connection failure 1004- L2CAP: support connection requests during connection failure 1005- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1006- HCI: avoid double free during halting 1007- SM: fixed reconnect using legacy pairing in slave role 1008 1009 1010