1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11### Added 12- HFP HF: send custom AT command with hfp_hf_send_at_command 13- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 14- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 15- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 16- GAP: support BIG with gap_big_create and gap_big_terminate 17- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 18- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 19- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 20 21### Fixed 22- GAP: use static random address after power up 23 24### Changed 25- HCI Dump: provide log level to log_message implementation 26- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 27 28 29## Release v1.5.3 30 31### Added 32- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 33- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 34- HFP HF: provide Calling Line Identification alpha field 35- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 36- GOEP Server 37- Chipset: support for firmware download and configuration of Realtek Controllers 38 39### Fixed 40- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 41- GAP: fix race condition that causes duplicate authenticate request 42- SM: address update for non-resolvable private addresses 43- SM: reset state on power off transition 44- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 45- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 46- HFP: try next link setting for SCO connection failure after SCO reject errors 47- HFP AG: activate all AG indicators upon service level connection establishment 48- HFP AG: handle call termination in alerting call state 49- HFP HF: fix parsing of phone number for voice tag 50- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 51 52### Changed 53- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 54- SM: pairing events indicate if LE Secure Connection will be used 55- A2DP: new a2dp.c contains shared code of Sink and Source roles 56- A2DP Sink: automatically configure stream endpoint for outgoing connections 57- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 58- libusb: command line options to delete TLV and specify log file path 59- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 60 61## Release v1.5.2 62 63### Added 64- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 65- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 66- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 67- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 68- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 69- GATT Service: Audio Input Control Service Server (AICS 1.0) 70- GATT Service: Microphone Control Service Server (MCS 1.0) 71- GATT Service: Volume Control Service Server (VCS 1.0) 72- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 73 74### Fixed 75- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 76- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 77- GAP: disable scanning, advertising, connection before updating random address 78- GAP: fix LE Scan with whitelist 79- HFP_AG: fix tracking for call dropped during outgoing ringing 80- HFP: Free HFP Connection object on SDP error / Service not found 81- PBAP Client: emit operation complete with status OBEX_ABORTED 82 83### Changed 84- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 85- GAP: set min encryption key size during init, if supported 86- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 87- ATT Server: use uint8_t for status returns 88- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 89 90 91## Release v1.5.1 92 93### Added 94- GOEP Client: add goep_client_version_20_or_higher 95- ESP32: implement audio source 96 97### Fixed 98- PBAP Client: support disconnect while operation is ongoing 99- PBAP Client: use SRM only if GOEP v2.0 or higher connection 100- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 101- L2CAP: limit remote MTU by local tx configuration in ERTM 102 103### Changed 104- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 105- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 106- ESP32: use I2S configuration from ESP32 LyraT V4.3 107 108 109## Release v1.5.0 110 111### Added 112- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 113- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 114- HCI: hci_remove_event_handler to remove packet handler 115- hci_cmd: support variable length fields and arrayed parameters 116- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 117- GAP: gap_set_page_timeout to set Page Timeout 118- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 119- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 120- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 121- A2DP: allow to register media codec validator for sink and source with: 122 - `a2dp_sink_register_media_config_validator` 123 - `a2dp_source_register_media_config_validator` 124- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 125- OBEX: new obex_parser for chunked OBEX data 126- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 127- SM: sm_remove_event_handler to remove packet handler 128- GATT Service: Bond Management Service (BMS 1.0) Server 129- GATT Service: Microphone Control Service (MICS 1.0) Server 130- GATT Service: TX Power Service (TPS 1.0) Server 131- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 132- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 133 134### Fixed 135- A2DP Source: fix reconfigure 136- AVRCP Controller: prevent registering of notifications for unsupported events 137- RFCOMM: fixed handling of remote port configuration command 138- HFP AG: fix accept incoming connection while audio connection is established 139- PBAP Client: handle chunked vCard Listing 140- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 141- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 142- SM: support storing bonding information for devices with identical IRK but different public addresses 143- GAP: restart advertising when private address changes 144- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 145 146### Changed 147- Drop iOS support 148- HCI: provide status instead of undocumented int error code and bool for API functions 149- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 150- GAP: local name, EIR data, class of device and default link policy can be updated at any time 151- L2CAP: provide status instead of undocumented int error code and bool for API functions 152- L2CAP: remote features not required for SDP connections 153- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 154- L2CAP: drop reason parameter in l2cap_disconnect 155- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 156- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 157- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 158- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 159- RFCOMM: provide status instead of undocumented int error code and bool for API functions 160- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 161- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 162- HFP: API functions return status code if appropriate 163- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 164- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 165- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 166- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 167- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 168- AVRCP: use PANEL as default unit + subunit info 169- AVRCP Controller: automatically query supported events when registering for notifications 170- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 171- Run Loop: new functionality for HCI transport drivers and inter-process communication: 172 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 173 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 174 - *btstack_run_loop_trigger_exit*: trigger run loop exit 175- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 176- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 177 178 179## Release v1.4.1 180 181### Added 182- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 183 184### Fixed 185- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 186- GAP: avoid requesting authentication twice 187- GAP: cache own address on start advertising and connecting, provide getters 188- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 189- SM: fix race condition between local address changes and pairing procedure 190- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 191 192### Changed 193- HCI: update advertising data without stopping advertising first 194- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 195- GAP: return status for `gap_set_security_mode` 196- GAP: abort legacy pairing if Level 4 is required 197- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 198- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 199- GAP: validate minimal service security level can be reached during pairing in responder role 200- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 201- CVE-2020-26555: reject connections to and from devices with same BD ADDR 202- CVE-2020-26555: ignore NULL link key 203- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 204 205## Release v1.4 206 207### Added 208- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 209- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 210- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 211 - support sending and receiving SLIP frames for HCI H5 212 - support odd parity 213 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 214- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 215- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 216- GATT Client: Battery Service Client 217- GATT Client: Device Information Service Client 218- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 219- GATT Client: Scan Parameters Service Client 220- GATT Server: Scan Parameters Service Server 221- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 222- GAP: support sniff subrating with `gap_sniff_subrating_configure` 223- GAP: support QoS setup with `gap_qos_set` 224- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 225- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 226- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 227- AVRCP Controller: reassemble fragmented AVCTP packets 228- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 229- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 230 231### Fixed 232- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 233- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 234- GAP: allow to disable link supervision timeout 235- GAP: fix `gap_connect` after `gap_connect_cancel` 236- GAP: re-configure advertisements after power cycle 237- HCI: handle start inquiry failure 238- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 239- L2CAP: return unknown mandatory option in config response 240- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 241- AVRCP Target: fix notification changed event 242- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 243- HFP HF: fix audio connection setup if codec negotiation is supported 244- HFP HF: only emit single event for RING and AG Status updates 245- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 246 247### Changed 248- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 249 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 250 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 251 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 252 - iOS: not supported 253- Run Loop Base: functionality used in most platform run loop implementations 254 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 255 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 256- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 257 - `posix/hci_dump_posix_fs` - writes binary log file 258 - `posix/hci_dump_stdout` - log to console using printf with local system time 259 - `embedded/hci_dump_embedded_stdout` - log to console using printf 260 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 261 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 262- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 263- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 264- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 265- POSIX Ports: use new `btstack_uart_posix` implementation 266- posix-h5/posix-h5-bcm: use even parity for UART 267- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 268- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 269- GAP: only store link key if it allows requested security level 270- GAP: abort SSP pairing if MITM protection required but not possible 271- SM: start pairing as Central for already encrypted connection on Slave Security Request 272- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 273- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 274- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 275 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 276- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 277 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 278- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 279- HFP: provide acl_handle in events to identify connection 280- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 281- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 282 283 284## Release v1.3.2 285 286### Added 287- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 288- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 289- HID Host: add profile, update `hid_host_demo.c` example 290 291### Fixed 292- L2CAP: make handling of HCI disconnect more robust 293- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 294- AVRCP: fix issue when Controller and Target send at the same time 295 296### Changed 297- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 298 299 300## Release v1.3 301 302### Added 303- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 304- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 305- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 306- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 307- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 308- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 309- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 310- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 311- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 312 313### Fixed 314- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 315- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 316- HFP AG/HSP AG: avoid connecting to remote service with same role 317- A2DP Source: support multiple Stream Endpoints with different Media Codec types 318- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 319- GATT Compiler: support multiple instances of the same service 320 321### Changed 322- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 323- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 324- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 325- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 326- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 327- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 328- Ports: STM32-F103RB Nucleo + CC256x port removed 329- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 330 331 332## Release v1.2.1 333 334### Fixed 335- L2CAP: use connection handle for channel lookups 336- L2CAP: forward data only in open state 337 338### Changed 339- L2CAP: check packet size against local mtu for classic basic channels 340 341 342## Release v1.2 343 344### Fixed 345- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 346- SM: fix update of sc flag for re-encrypted connection in peripheral role 347- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 348- ESP32: fix audio sink driver 349 350### Added 351- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 352- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 353- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 354- SM: emit events for re-encryption started/complete when bonding information is available 355 356### Changed 357- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 358- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 359 360 361## Changes October 2020 362 363### Fixed 364- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 365- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 366- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 367- SM: set LinkKey flag to request CTKD if enabled 368- SM: store CTKD key with Public Identity Address 369- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 370- SM: start SMP Timeout when sending Security Request 371- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 372- HCI: fix reject of LE remote connection param request via HCI 373 374### Added 375- GAP: add `gap_get_link_key_for_bd_addr` 376- GAP: add `gap_bonded` to check if bonding information is available for active connection 377- SM: support h7 for CTKD 378 379### Changed 380- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 381- SM: block connection if encryption fails for bonded devices as Central 382- SM: support pairing as Central after failed re-encryption 383 384 385## Release v1.1 386 387### Fixed 388- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 389 390### Added 391 392### Changed 393 394 395## Changes September 2020 396 397### Fixed 398- HFP: fix parsing of ranges e.g. in +CIND responses 399- AVDTP, AVRCP: fix bugs due to transaction id overrun 400- A2DP Source: fix issues with stream configuration by sink 401- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 402 403### Added 404- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 405- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 406 407### Changed 408- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 409- HSP, HFP: allow to configure usable SCO packet types 410- cc256x: update CC256xC init script to v1.4 411- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 412 413## Changes August 2020 414 415### Fixed 416- ESP32: fix authentication for incoming Secure Connections 417- AVDTP: Fix forwarding of Delay reports 418- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 419- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 420 421### Added 422- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 423- GAP: request role change for classic connection via `gap_request_role` 424- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 425- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 426- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 427- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 428- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 429- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 430 431### Changed 432- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 433- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 434- example/hid_host_demo: try to become master for incoming connections 435- btstack_run_loop: use btstack_assert instead of local while(true) 436- att_db_util: allow to reset att_db via `att_db_util_init` 437 438## Changes July 2020 439 440### Fixed 441- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 442- AVDTP: handle concurrent signaling establishment with reject and retry 443 444### Added 445- example/hid_host_demo: support reconnect from HID device 446- Crypto: support software AES128 for AES-CCM operations 447- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 448- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 449- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 450- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 451- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 452 453### Changed 454- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 455 456 457## Changes June 2020 458 459### Fixed 460- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 461- SM: Fix validation of confirm value for secure connection Passkey entry 462- AVRCP: handle concurrent signaling establishment with reject and retry 463 464### Added 465- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 466- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 467- Windows port for Dialog DA14585 connected via serial port 468 469## Changes 470- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 471 472## Changes May 2020 473 474### Fixed 475- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 476- pbap_client: fix PBAP UUID len on connect message 477- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 478- A2DP Source: only connect to remote sink stream endpoints 479- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 480- hsp_hs: fix disconnect if audio not connected 481- hsp_ag: fix accept incoming connection 482 483### Added 484- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 485- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 486- cc256x: allow to specify power vector for each modulation type 487- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 488- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 489- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 490 491### Changed 492- L2CAP ERTM: send extended features request only once per HCI connection 493 494 495## Changes April 2020 496 497### Fixed 498- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 499- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 500 501### Added 502- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 503- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 504- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 505 506### Changed 507- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 508- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 509- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 510 511 512## Changes March 2020 513 514### Fixed 515- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 516- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 517 518### Added 519- GATT Client: allow to register for any notification/indication and/or any connection 520- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 521- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 522- btstack_util: added btstack_replace_bd_addr_placeholder 523 524### Changed 525- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 526- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 527 528 529## Changes Februar 2020 530 531### Fixed 532- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 533- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 534 535### Changed 536- hid_host_mode: allow sniff mode 537 538### Added 539- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 540 541 542## Changes January 2020 543 544### Fixed 545- L2CAP ERTM: avoid read-after-free on decline of incoming connection 546- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 547- att_db_util: fix realloc of att db buffer for large attributes 548- btstack_tlv_posix: only keep last value in memory, fix delete operation 549- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 550 551### Added 552- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 553- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 554- ATT Server: validate request pdu length 555 556### Changed 557- Crypto: update AES-CMAC implementation to access all message bytes sequentially 558 559 560## Changes December 2019 561 562### Fixed 563- example/pan_lwip_http_server: use Network Access Point, CoD 564- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 565 566### Added 567 568### Changed 569- Updated CC256x initscript: CC256xC v1.3 570- ESP32: add CMake project files 571 572 573## Changes November 2019 574 575### Fixed 576- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 577- L2CAP: send LE Data Channel SDUs round robin with other data 578- L2CAP ERTM: send ERTM I-frames round robin with other data 579 580### Added 581- ATT Server: return error if request to send now for Notification or Indication already registered 582- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 583- btstack_run_loop_remove: return bool true if timer/data source was removed 584- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 585- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 586- lwip: add download test files to http server demo 587 588### Changed 589- Linked List: return bool true if item was removed 590 591 592## Changes October 2019 593 594### Fixed 595 596### Added 597- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 598- provide `btstack_assert(condition)` 599- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 600 601### Changed 602- libusb and posix ports: store bonding information in TLV 603 604 605## Changes September 2019 606 607### Fixed 608- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 609- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 610- GATT Client: allow Write Without Response independent of other requests 611 612### Added 613- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 614- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 615 616### Changed 617- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 618- bluetooth.h: extract internal defintitions to respective protocol layers 619- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 620 621 622## Changes August 2019 623 624### Fixed 625- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 626- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 627- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 628- L2CAP ERTM: stop timers on disconnect 629- L2CAP ERTM: fix sending of segmented SDUs 630- L2CAP ERTM: handle unsupported Information Response 631- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 632 633### Added 634- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 635 636## Changed 637- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 638- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 639- POSIX: use monotonic clock as timebase if available 640- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 641- HCI: Read Encryption Key Size after encryption was enabled 642- Errata 11838: 643 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 644 - GAP: validate encryption key size to emit GAP Security Levels 645 646## Changes July 2019 647 648### Fixed 649- SM: Fixed regression introduced in f3582630 650- L2CAP: avoid reading l2cap signaling command len out of bounds 651- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 652 653### Changed 654- SM: Start encryption upon receiving slave securiy request if bonded 655- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 656 657--- 658 659## Changes June 2019 660 661### Changed 662- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 663- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 664- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR 665 666### Fixed 667- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 668- libusb: avoid use-after-free for SCO packets on disconnect 669 670### Added 671- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 672- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 673- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 674 675--- 676 677## Changes May 2019 678 679### Changed 680- ESP32: Configure SCO over HCI after power up 681- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 682 is defined, an explicit delete field is used to indicate an invalid entry. 683 684### Fixed 685- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 686 687### Added 688- gatt_client: emit query complete event for signed write operation 689- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 690 691--- 692 693## Changes April 2019 694 695### Changed 696- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 697 698### Fixed 699- hci: pad LE Scan response with zeroes 700- SM: store local CSRK 701- ATT DB: call write callback for validated signed writes 702- ATT Server: abort signed write validation on incoming new request 703- Bluetooth SIG web scraping tools updated 704- libusb: compiles for FreeBSD 705 706### Added 707 708--- 709 710## Changes March 2019 711 712### Changed 713- use Makefile for stm32-f4discovery-cc256x port 714- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 715 716### Fixed 717- SM: Use provided authentication requirements in slave security request 718 719### Added 720- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 721- SM: Track if connection encryption is based on LE Secure Connection pairing 722- ATT DB: Validate if connection encrypted is based on SC if requested 723- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 724- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 725- ESP32: erase nvs flash is newer nvs version found 726- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 727- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 728 729## Changes February 2019 730 731### Changed 732- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 733- btstack_audio: split interface into sink and source 734 735### Fixed 736- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 737- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 738 739### Added 740- example/a2dp_sink_demo: add target role, support volume control on both devices 741- example/audio_duplex: playback audio audio source on audio sink (test audio path) 742- btstack_audio_embedded: implement audio source path 743 744--- 745 746## Changes January 2019 747 748### Changed 749- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 750- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 751 752### Added 753- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 754- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 755- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 756- ad_parser: validate data element length fields in ad_iterator_has_more 757- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 758 759### Fixed 760- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 761- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 762- Crypto: directly process queued crypto operation on HCI result 763 764--- 765 766## Changes December 2018 767 768### Added 769- SM: generate and store ER / IR keys in TLV, unless manually set by application 770- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 771 772### Fixed 773- SM: fix internal buffer overrun during random address generation 774 775## Changes November 2018 776 777### Added 778- GAP: gap_le_connection_interval provides connection interval for conn handle 779- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 780- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 781- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 782- SM: generate and store ER / IR keys in TLV, unless manually set by application 783 784### Fixed 785- SM: prevent random address updates if gap_random_address_set was used 786- SM: fix internal buffer overrun that can cause storing of bonding information to fail 787- SM: ignore Slave Security Request after sending own Pairing Request 788- L2CAP: fix use after free on disconnect if ERTM is enabled 789- HFP: Handle multiple commands/responses in single RFCOMM packet 790- Memory Pools: clear all buffers before use 791 792--- 793 794## Changes October 2018 795 796### Added 797- SDP Server: queue incoming connections when already connected instead of rejecting them 798- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 799- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 800 801### Fixed 802- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 803- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 804- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 805- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 806- L2CAP ERTM: fix outgoing fragment management 807- HFP: decline incoming RFCOMM connection after outgoing connection was started 808- AVRCP: fix crash on disconnect of connection established by remote 809 810--- 811 812## Changes September 2018 813 814### Fixed 815- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 816- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 817- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 818- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 819- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 820- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 821- RFCOMM: Avoid use-after-free on channel finalize 822- GATT Client: stop timer on disconnect - fixes use after free / crash 823 824### Added 825- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 826- 3rd-party: yxml is used for PBAP vCard list parsing 827- cc256xC: new v1.1 init scripts 828 829--- 830 831## Changes August 2018 832 833### Added 834- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 835 836### Fixed 837- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 838- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 839- SM: drop LTK flag from Pairing Response for Secure Connections 840- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 841 842## Changes June 2018 843 844### Added 845- btstack_audio.h: application level API for audio playback and recording 846- embedded/hal_audio.h: low-level API for audio playback and recording 847- HID Device: hid_device_connect(..) function 848- ESP32: implement hal_audio 849- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 850- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 851 852### Changed 853- Errata 10734: 854 - SM: Generate new EC Public Keypair after each pairing 855 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 856- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 857- windows: ignore virtual Bluetooth adapter provided by VMware 858- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 859 860--- 861 862## Changes June 2018 863 864### Fixed 865- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 866- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 867- AVRCP Controller: fix parsing of now playing info 868 869### Changed 870- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 871 872### Added 873- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 874 875--- 876 877## Changes May 2018 878 879### Added 880- GAP: re-encrypt outgoing connection if bonded 881- ATT Server: wait until re-encryption is complete 882- GATT Client: wait until re-encryption is complete 883- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 884- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 885 886### Changed 887- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 888 889### Fixed 890- SM: Fix LE Secure Connection pairing in Central role 891- le_device_db_tlv: fix seq nr management 892- SM: improve le_device_db lookup and storing of IRK 893- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 894- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 895 896--- 897 898## Changes April 2018 899 900### Added 901- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 902- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 903- Embedded: support btstack_stdin via SEGGER RTT 904 905### Changed 906- att_db_util: added security requirement arguments to characteristic creators 907- SM: use btstack_crypto for cryptographpic functions 908- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 909 910### Fixed 911- HFP: fix answer call command 912- HCI: fix buffer overrun in gap_inquiry_explode 913- SDP: free service record item on sdp_unregister_service 914 915## Changes March 2018 916 917### Added 918- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 919- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 920- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 921 922### Fixed 923- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 924- HSP HS: accept incomming SCO connection 925- SM: fix iteration over LE Device DB entries for bonding and address resolving 926- SM: store pairing information only if both devices have requested bonding 927 928--- 929 930## Changes February 2018 931 932### Added 933- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 934- SM: new event SM_EVENT_PAIRING_COMPLETE 935- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 936- GAP: add gap_delete_all_link_keys 937 938### Changed 939- GATT Client: round robin for multiple connections 940- ATT Dispatch: round robin for ATT Server & GATT Client 941- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 942- btstack_link_key_db: addition functions for link key iteration 943- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 944- CSR: set all keys in psram instead of default 945 946### Fixed 947- tc3556x: fix startup after baud rate change 948 949--- 950 951## Changes January 2018 952 953### Added 954- Port for Windows with Zephyr HCI Firmware connected via serial port 955- em9304: upload patch containers during HCI bootup 956- Makefile for STM32-F4Discovery port 957- support for console out via SEGGER RTT 958- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 959- LE Streamer Client can send as fast as possbile as well 960- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 961 962### Changed 963- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 964- GAP: gap_set_connection_parameters includes scan interval and window params 965- GATT Client: GATT_EVENT_MTU indicates max MTU 966- ATT DB Util: attribute handle is returned for new Services and Characteristics 967 968### Fixed 969- Windows: retry serial port operations if not all bytes have been read/written 970- HFP: avoid buffer overflows setting up messages 971- SBC Decoder: improved error handling for invalid SBC audio data 972- GAP: fix Connection Parameter Response in Central role 973- ATT DB Util: update pointer to database in case of realloc 974- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 975- GAP: release HCI Connnection after gap_le_conne 976- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 977 978--- 979 980## Changes December 2017 981 982### Added 983- Introduced btstack_network.h network interface abstraction 984- btstack_network_posix implementation using Linux tun/tap interface 985- WICED: support for btstack_stdin (HAVE_STDIN) 986- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 987- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 988- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 989- LE Device DB TLV: overwrite oldest entry if no free entries available 990- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 991- Example/hid_host_demo with HID parser and support for basic US keyboard layout 992- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 993- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 994 995### Changed 996- panu_demo: uses btstack_network.h now 997- WICED: configure printf to replace Linefeed with CRLF 998- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 999 1000### Fixed 1001- RFCOMM: support connection requests during connection failure 1002- L2CAP: support connection requests during connection failure 1003- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1004- HCI: avoid double free during halting 1005- SM: fixed reconnect using legacy pairing in slave role 1006 1007 1008