1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11## Added 12- HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned 13- HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED 14- Port for Renesas RA6M4 with DA14531 15- example: gatt_streamer_server and le_streamer_client report DLE and PHY changes 16- gatt_client: queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response 17- esp32: warn about unsuitable sdkconfig 18- esp32: add BTstack component config options via menuconfig 19- esp32: allow to disable default audio i2s driver via component config 20- 21## Fixed 22- hci: fix set extended scan response 23- btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS 24- gatt_client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle 25- A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout 26 27## Changed 28- GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE 29- bluetooth: indicated identity address in resolved address type names 30- btstack_audio: added get_samplerate function to help with audio sample rate synchronization 31- btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE 32- esp32: drop support for Makefile projects from esp-idf 3.x 33 34## Release v1.5.5 35 36### Added 37- hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_* 38- GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0) 39- example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device 40 41### Fixed 42- GAP: reload LE Resolving List after power-cycle 43- GAP: fix setting of LE Scan Response for data that needs to be fragmented 44- SM: fix pairing process with active ATT communication 45- ESP32: fix init for BR/EDR Only mode 46- ESP32: fix audio driver for sink + source mode 47- ESP32: fixes for ESP-IDF v5.x 48- ESP32: fix compile of non-BTstack examples after adding components/btstack 49 50### Changed 51- GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle 52- SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK 53- Mesh: move GATT Services into src/mesh/gatt-service 54- LE Audio: move GATT Services into src/le-audio/gatt-service 55- libusb: improve implementation 56 57## Known Issues 58- ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x 59 60 61## Release v1.5.4 62 63### Added 64- HFP HF: send custom AT command with hfp_hf_send_at_command 65- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 66- HFP HF: provide Call Waiting information alpha field 67- HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC 68- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 69- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 70- GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter 71- GAP: support BIG with gap_big_create and gap_big_terminate 72- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 73- GAP: support Periodic Advertisement Sync Transfer 74- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 75- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 76- Support for ESP32-C3 and ESP32-S3 77 78### Fixed 79- HCI: only add paired LE devices with IRK to resolving list 80- HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist 81- GAP: use static random address after power up 82- L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 83- SM: avoid potential loop during CTKD 84 85### Changed 86- HCI Dump: provide log level to log_message implementation 87- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 88 89 90## Release v1.5.3 91 92### Added 93- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 94- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 95- HFP HF: provide Calling Line Identification alpha field 96- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 97- GOEP Server 98- Chipset: support for firmware download and configuration of Realtek Controllers 99 100### Fixed 101- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 102- GAP: fix race condition that causes duplicate authenticate request 103- SM: address update for non-resolvable private addresses 104- SM: reset state on power off transition 105- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 106- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 107- HFP: try next link setting for SCO connection failure after SCO reject errors 108- HFP AG: activate all AG indicators upon service level connection establishment 109- HFP AG: handle call termination in alerting call state 110- HFP HF: fix parsing of phone number for voice tag 111- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 112 113### Changed 114- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 115- SM: pairing events indicate if LE Secure Connection will be used 116- A2DP: new a2dp.c contains shared code of Sink and Source roles 117- A2DP Sink: automatically configure stream endpoint for outgoing connections 118- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 119- libusb: command line options to delete TLV and specify log file path 120- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 121 122## Release v1.5.2 123 124### Added 125- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 126- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 127- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 128- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 129- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 130- GATT Service: Audio Input Control Service Server (AICS 1.0) 131- GATT Service: Microphone Control Service Server (MCS 1.0) 132- GATT Service: Volume Control Service Server (VCS 1.0) 133- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 134 135### Fixed 136- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 137- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 138- GAP: disable scanning, advertising, connection before updating random address 139- GAP: fix LE Scan with whitelist 140- HFP_AG: fix tracking for call dropped during outgoing ringing 141- HFP: Free HFP Connection object on SDP error / Service not found 142- PBAP Client: emit operation complete with status OBEX_ABORTED 143 144### Changed 145- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 146- GAP: set min encryption key size during init, if supported 147- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 148- ATT Server: use uint8_t for status returns 149- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 150 151 152## Release v1.5.1 153 154### Added 155- GOEP Client: add goep_client_version_20_or_higher 156- ESP32: implement audio source 157 158### Fixed 159- PBAP Client: support disconnect while operation is ongoing 160- PBAP Client: use SRM only if GOEP v2.0 or higher connection 161- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 162- L2CAP: limit remote MTU by local tx configuration in ERTM 163 164### Changed 165- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 166- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 167- ESP32: use I2S configuration from ESP32 LyraT V4.3 168 169 170## Release v1.5.0 171 172### Added 173- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 174- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 175- HCI: hci_remove_event_handler to remove packet handler 176- hci_cmd: support variable length fields and arrayed parameters 177- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 178- GAP: gap_set_page_timeout to set Page Timeout 179- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 180- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 181- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 182- A2DP: allow to register media codec validator for sink and source with: 183 - `a2dp_sink_register_media_config_validator` 184 - `a2dp_source_register_media_config_validator` 185- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 186- OBEX: new obex_parser for chunked OBEX data 187- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 188- SM: sm_remove_event_handler to remove packet handler 189- GATT Service: Bond Management Service (BMS 1.0) Server 190- GATT Service: Microphone Control Service (MICS 1.0) Server 191- GATT Service: TX Power Service (TPS 1.0) Server 192- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 193- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 194 195### Fixed 196- A2DP Source: fix reconfigure 197- AVRCP Controller: prevent registering of notifications for unsupported events 198- RFCOMM: fixed handling of remote port configuration command 199- HFP AG: fix accept incoming connection while audio connection is established 200- PBAP Client: handle chunked vCard Listing 201- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 202- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 203- SM: support storing bonding information for devices with identical IRK but different public addresses 204- GAP: restart advertising when private address changes 205- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 206 207### Changed 208- Drop iOS support 209- HCI: provide status instead of undocumented int error code and bool for API functions 210- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 211- GAP: local name, EIR data, class of device and default link policy can be updated at any time 212- L2CAP: provide status instead of undocumented int error code and bool for API functions 213- L2CAP: remote features not required for SDP connections 214- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 215- L2CAP: drop reason parameter in l2cap_disconnect 216- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 217- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 218- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 219- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 220- RFCOMM: provide status instead of undocumented int error code and bool for API functions 221- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 222- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 223- HFP: API functions return status code if appropriate 224- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 225- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 226- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 227- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 228- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 229- AVRCP: use PANEL as default unit + subunit info 230- AVRCP Controller: automatically query supported events when registering for notifications 231- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 232- Run Loop: new functionality for HCI transport drivers and inter-process communication: 233 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 234 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 235 - *btstack_run_loop_trigger_exit*: trigger run loop exit 236- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 237- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 238 239 240## Release v1.4.1 241 242### Added 243- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 244 245### Fixed 246- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 247- GAP: avoid requesting authentication twice 248- GAP: cache own address on start advertising and connecting, provide getters 249- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 250- SM: fix race condition between local address changes and pairing procedure 251- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 252 253### Changed 254- HCI: update advertising data without stopping advertising first 255- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 256- GAP: return status for `gap_set_security_mode` 257- GAP: abort legacy pairing if Level 4 is required 258- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 259- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 260- GAP: validate minimal service security level can be reached during pairing in responder role 261- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 262- CVE-2020-26555: reject connections to and from devices with same BD ADDR 263- CVE-2020-26555: ignore NULL link key 264- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 265 266## Release v1.4 267 268### Added 269- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 270- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 271- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 272 - support sending and receiving SLIP frames for HCI H5 273 - support odd parity 274 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 275- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 276- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 277- GATT Client: Battery Service Client 278- GATT Client: Device Information Service Client 279- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 280- GATT Client: Scan Parameters Service Client 281- GATT Server: Scan Parameters Service Server 282- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 283- GAP: support sniff subrating with `gap_sniff_subrating_configure` 284- GAP: support QoS setup with `gap_qos_set` 285- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 286- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 287- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 288- AVRCP Controller: reassemble fragmented AVCTP packets 289- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 290- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 291 292### Fixed 293- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 294- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 295- GAP: allow to disable link supervision timeout 296- GAP: fix `gap_connect` after `gap_connect_cancel` 297- GAP: re-configure advertisements after power cycle 298- HCI: handle start inquiry failure 299- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 300- L2CAP: return unknown mandatory option in config response 301- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 302- AVRCP Target: fix notification changed event 303- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 304- HFP HF: fix audio connection setup if codec negotiation is supported 305- HFP HF: only emit single event for RING and AG Status updates 306- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 307 308### Changed 309- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 310 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 311 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 312 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 313 - iOS: not supported 314- Run Loop Base: functionality used in most platform run loop implementations 315 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 316 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 317- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 318 - `posix/hci_dump_posix_fs` - writes binary log file 319 - `posix/hci_dump_stdout` - log to console using printf with local system time 320 - `embedded/hci_dump_embedded_stdout` - log to console using printf 321 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 322 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 323- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 324- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 325- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 326- POSIX Ports: use new `btstack_uart_posix` implementation 327- posix-h5/posix-h5-bcm: use even parity for UART 328- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 329- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 330- GAP: only store link key if it allows requested security level 331- GAP: abort SSP pairing if MITM protection required but not possible 332- SM: start pairing as Central for already encrypted connection on Slave Security Request 333- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 334- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 335- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 336 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 337- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 338 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 339- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 340- HFP: provide acl_handle in events to identify connection 341- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 342- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 343 344 345## Release v1.3.2 346 347### Added 348- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 349- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 350- HID Host: add profile, update `hid_host_demo.c` example 351 352### Fixed 353- L2CAP: make handling of HCI disconnect more robust 354- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 355- AVRCP: fix issue when Controller and Target send at the same time 356 357### Changed 358- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 359 360 361## Release v1.3 362 363### Added 364- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 365- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 366- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 367- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 368- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 369- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 370- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 371- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 372- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 373 374### Fixed 375- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 376- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 377- HFP AG/HSP AG: avoid connecting to remote service with same role 378- A2DP Source: support multiple Stream Endpoints with different Media Codec types 379- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 380- GATT Compiler: support multiple instances of the same service 381 382### Changed 383- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 384- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 385- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 386- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 387- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 388- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 389- Ports: STM32-F103RB Nucleo + CC256x port removed 390- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 391 392 393## Release v1.2.1 394 395### Fixed 396- L2CAP: use connection handle for channel lookups 397- L2CAP: forward data only in open state 398 399### Changed 400- L2CAP: check packet size against local mtu for classic basic channels 401 402 403## Release v1.2 404 405### Fixed 406- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 407- SM: fix update of sc flag for re-encrypted connection in peripheral role 408- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 409- ESP32: fix audio sink driver 410 411### Added 412- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 413- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 414- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 415- SM: emit events for re-encryption started/complete when bonding information is available 416 417### Changed 418- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 419- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 420 421 422## Changes October 2020 423 424### Fixed 425- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 426- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 427- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 428- SM: set LinkKey flag to request CTKD if enabled 429- SM: store CTKD key with Public Identity Address 430- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 431- SM: start SMP Timeout when sending Security Request 432- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 433- HCI: fix reject of LE remote connection param request via HCI 434 435### Added 436- GAP: add `gap_get_link_key_for_bd_addr` 437- GAP: add `gap_bonded` to check if bonding information is available for active connection 438- SM: support h7 for CTKD 439 440### Changed 441- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 442- SM: block connection if encryption fails for bonded devices as Central 443- SM: support pairing as Central after failed re-encryption 444 445 446## Release v1.1 447 448### Fixed 449- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 450 451### Added 452 453### Changed 454 455 456## Changes September 2020 457 458### Fixed 459- HFP: fix parsing of ranges e.g. in +CIND responses 460- AVDTP, AVRCP: fix bugs due to transaction id overrun 461- A2DP Source: fix issues with stream configuration by sink 462- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 463 464### Added 465- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 466- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 467 468### Changed 469- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 470- HSP, HFP: allow to configure usable SCO packet types 471- cc256x: update CC256xC init script to v1.4 472- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 473 474## Changes August 2020 475 476### Fixed 477- ESP32: fix authentication for incoming Secure Connections 478- AVDTP: Fix forwarding of Delay reports 479- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 480- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 481 482### Added 483- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 484- GAP: request role change for classic connection via `gap_request_role` 485- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 486- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 487- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 488- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 489- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 490- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 491 492### Changed 493- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 494- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 495- example/hid_host_demo: try to become master for incoming connections 496- btstack_run_loop: use btstack_assert instead of local while(true) 497- att_db_util: allow to reset att_db via `att_db_util_init` 498 499## Changes July 2020 500 501### Fixed 502- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 503- AVDTP: handle concurrent signaling establishment with reject and retry 504 505### Added 506- example/hid_host_demo: support reconnect from HID device 507- Crypto: support software AES128 for AES-CCM operations 508- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 509- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 510- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 511- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 512- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 513 514### Changed 515- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 516 517 518## Changes June 2020 519 520### Fixed 521- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 522- SM: Fix validation of confirm value for secure connection Passkey entry 523- AVRCP: handle concurrent signaling establishment with reject and retry 524 525### Added 526- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 527- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 528- Windows port for Dialog DA14585 connected via serial port 529 530## Changes 531- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 532 533## Changes May 2020 534 535### Fixed 536- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 537- pbap_client: fix PBAP UUID len on connect message 538- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 539- A2DP Source: only connect to remote sink stream endpoints 540- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 541- hsp_hs: fix disconnect if audio not connected 542- hsp_ag: fix accept incoming connection 543 544### Added 545- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 546- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 547- cc256x: allow to specify power vector for each modulation type 548- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 549- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 550- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 551 552### Changed 553- L2CAP ERTM: send extended features request only once per HCI connection 554 555 556## Changes April 2020 557 558### Fixed 559- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 560- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 561 562### Added 563- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 564- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 565- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 566 567### Changed 568- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 569- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 570- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 571 572 573## Changes March 2020 574 575### Fixed 576- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 577- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 578 579### Added 580- GATT Client: allow to register for any notification/indication and/or any connection 581- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 582- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 583- btstack_util: added btstack_replace_bd_addr_placeholder 584 585### Changed 586- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 587- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 588 589 590## Changes Februar 2020 591 592### Fixed 593- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 594- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 595 596### Changed 597- hid_host_mode: allow sniff mode 598 599### Added 600- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 601 602 603## Changes January 2020 604 605### Fixed 606- L2CAP ERTM: avoid read-after-free on decline of incoming connection 607- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 608- att_db_util: fix realloc of att db buffer for large attributes 609- btstack_tlv_posix: only keep last value in memory, fix delete operation 610- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 611 612### Added 613- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 614- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 615- ATT Server: validate request pdu length 616 617### Changed 618- Crypto: update AES-CMAC implementation to access all message bytes sequentially 619 620 621## Changes December 2019 622 623### Fixed 624- example/pan_lwip_http_server: use Network Access Point, CoD 625- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 626 627### Added 628 629### Changed 630- Updated CC256x initscript: CC256xC v1.3 631- ESP32: add CMake project files 632 633 634## Changes November 2019 635 636### Fixed 637- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 638- L2CAP: send LE Data Channel SDUs round robin with other data 639- L2CAP ERTM: send ERTM I-frames round robin with other data 640 641### Added 642- ATT Server: return error if request to send now for Notification or Indication already registered 643- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 644- btstack_run_loop_remove: return bool true if timer/data source was removed 645- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 646- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 647- lwip: add download test files to http server demo 648 649### Changed 650- Linked List: return bool true if item was removed 651 652 653## Changes October 2019 654 655### Fixed 656 657### Added 658- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 659- provide `btstack_assert(condition)` 660- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 661 662### Changed 663- libusb and posix ports: store bonding information in TLV 664 665 666## Changes September 2019 667 668### Fixed 669- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 670- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 671- GATT Client: allow Write Without Response independent of other requests 672 673### Added 674- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 675- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 676 677### Changed 678- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 679- bluetooth.h: extract internal defintitions to respective protocol layers 680- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 681 682 683## Changes August 2019 684 685### Fixed 686- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 687- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 688- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 689- L2CAP ERTM: stop timers on disconnect 690- L2CAP ERTM: fix sending of segmented SDUs 691- L2CAP ERTM: handle unsupported Information Response 692- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 693 694### Added 695- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 696 697## Changed 698- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 699- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 700- POSIX: use monotonic clock as timebase if available 701- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 702- HCI: Read Encryption Key Size after encryption was enabled 703- Errata 11838: 704 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 705 - GAP: validate encryption key size to emit GAP Security Levels 706 707## Changes July 2019 708 709### Fixed 710- SM: Fixed regression introduced in f3582630 711- L2CAP: avoid reading l2cap signaling command len out of bounds 712- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 713 714### Changed 715- SM: Start encryption upon receiving slave securiy request if bonded 716- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 717 718--- 719 720## Changes June 2019 721 722### Changed 723- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 724- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 725- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR 726 727### Fixed 728- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 729- libusb: avoid use-after-free for SCO packets on disconnect 730 731### Added 732- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 733- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 734- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 735 736--- 737 738## Changes May 2019 739 740### Changed 741- ESP32: Configure SCO over HCI after power up 742- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 743 is defined, an explicit delete field is used to indicate an invalid entry. 744 745### Fixed 746- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 747 748### Added 749- gatt_client: emit query complete event for signed write operation 750- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 751 752--- 753 754## Changes April 2019 755 756### Changed 757- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 758 759### Fixed 760- hci: pad LE Scan response with zeroes 761- SM: store local CSRK 762- ATT DB: call write callback for validated signed writes 763- ATT Server: abort signed write validation on incoming new request 764- Bluetooth SIG web scraping tools updated 765- libusb: compiles for FreeBSD 766 767### Added 768 769--- 770 771## Changes March 2019 772 773### Changed 774- use Makefile for stm32-f4discovery-cc256x port 775- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 776 777### Fixed 778- SM: Use provided authentication requirements in slave security request 779 780### Added 781- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 782- SM: Track if connection encryption is based on LE Secure Connection pairing 783- ATT DB: Validate if connection encrypted is based on SC if requested 784- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 785- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 786- ESP32: erase nvs flash is newer nvs version found 787- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 788- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 789 790## Changes February 2019 791 792### Changed 793- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 794- btstack_audio: split interface into sink and source 795 796### Fixed 797- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 798- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 799 800### Added 801- example/a2dp_sink_demo: add target role, support volume control on both devices 802- example/audio_duplex: playback audio audio source on audio sink (test audio path) 803- btstack_audio_embedded: implement audio source path 804 805--- 806 807## Changes January 2019 808 809### Changed 810- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 811- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 812 813### Added 814- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 815- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 816- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 817- ad_parser: validate data element length fields in ad_iterator_has_more 818- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 819 820### Fixed 821- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 822- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 823- Crypto: directly process queued crypto operation on HCI result 824 825--- 826 827## Changes December 2018 828 829### Added 830- SM: generate and store ER / IR keys in TLV, unless manually set by application 831- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 832 833### Fixed 834- SM: fix internal buffer overrun during random address generation 835 836## Changes November 2018 837 838### Added 839- GAP: gap_le_connection_interval provides connection interval for conn handle 840- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 841- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 842- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 843- SM: generate and store ER / IR keys in TLV, unless manually set by application 844 845### Fixed 846- SM: prevent random address updates if gap_random_address_set was used 847- SM: fix internal buffer overrun that can cause storing of bonding information to fail 848- SM: ignore Slave Security Request after sending own Pairing Request 849- L2CAP: fix use after free on disconnect if ERTM is enabled 850- HFP: Handle multiple commands/responses in single RFCOMM packet 851- Memory Pools: clear all buffers before use 852 853--- 854 855## Changes October 2018 856 857### Added 858- SDP Server: queue incoming connections when already connected instead of rejecting them 859- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 860- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 861 862### Fixed 863- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 864- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 865- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 866- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 867- L2CAP ERTM: fix outgoing fragment management 868- HFP: decline incoming RFCOMM connection after outgoing connection was started 869- AVRCP: fix crash on disconnect of connection established by remote 870 871--- 872 873## Changes September 2018 874 875### Fixed 876- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 877- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 878- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 879- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 880- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 881- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 882- RFCOMM: Avoid use-after-free on channel finalize 883- GATT Client: stop timer on disconnect - fixes use after free / crash 884 885### Added 886- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 887- 3rd-party: yxml is used for PBAP vCard list parsing 888- cc256xC: new v1.1 init scripts 889 890--- 891 892## Changes August 2018 893 894### Added 895- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 896 897### Fixed 898- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 899- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 900- SM: drop LTK flag from Pairing Response for Secure Connections 901- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 902 903## Changes June 2018 904 905### Added 906- btstack_audio.h: application level API for audio playback and recording 907- embedded/hal_audio.h: low-level API for audio playback and recording 908- HID Device: hid_device_connect(..) function 909- ESP32: implement hal_audio 910- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 911- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 912 913### Changed 914- Errata 10734: 915 - SM: Generate new EC Public Keypair after each pairing 916 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 917- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 918- windows: ignore virtual Bluetooth adapter provided by VMware 919- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 920 921--- 922 923## Changes June 2018 924 925### Fixed 926- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 927- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 928- AVRCP Controller: fix parsing of now playing info 929 930### Changed 931- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 932 933### Added 934- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 935 936--- 937 938## Changes May 2018 939 940### Added 941- GAP: re-encrypt outgoing connection if bonded 942- ATT Server: wait until re-encryption is complete 943- GATT Client: wait until re-encryption is complete 944- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 945- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 946 947### Changed 948- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 949 950### Fixed 951- SM: Fix LE Secure Connection pairing in Central role 952- le_device_db_tlv: fix seq nr management 953- SM: improve le_device_db lookup and storing of IRK 954- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 955- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 956 957--- 958 959## Changes April 2018 960 961### Added 962- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 963- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 964- Embedded: support btstack_stdin via SEGGER RTT 965 966### Changed 967- att_db_util: added security requirement arguments to characteristic creators 968- SM: use btstack_crypto for cryptographpic functions 969- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 970 971### Fixed 972- HFP: fix answer call command 973- HCI: fix buffer overrun in gap_inquiry_explode 974- SDP: free service record item on sdp_unregister_service 975 976## Changes March 2018 977 978### Added 979- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 980- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 981- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 982 983### Fixed 984- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 985- HSP HS: accept incomming SCO connection 986- SM: fix iteration over LE Device DB entries for bonding and address resolving 987- SM: store pairing information only if both devices have requested bonding 988 989--- 990 991## Changes February 2018 992 993### Added 994- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 995- SM: new event SM_EVENT_PAIRING_COMPLETE 996- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 997- GAP: add gap_delete_all_link_keys 998 999### Changed 1000- GATT Client: round robin for multiple connections 1001- ATT Dispatch: round robin for ATT Server & GATT Client 1002- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 1003- btstack_link_key_db: addition functions for link key iteration 1004- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 1005- CSR: set all keys in psram instead of default 1006 1007### Fixed 1008- tc3556x: fix startup after baud rate change 1009 1010--- 1011 1012## Changes January 2018 1013 1014### Added 1015- Port for Windows with Zephyr HCI Firmware connected via serial port 1016- em9304: upload patch containers during HCI bootup 1017- Makefile for STM32-F4Discovery port 1018- support for console out via SEGGER RTT 1019- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 1020- LE Streamer Client can send as fast as possbile as well 1021- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 1022 1023### Changed 1024- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 1025- GAP: gap_set_connection_parameters includes scan interval and window params 1026- GATT Client: GATT_EVENT_MTU indicates max MTU 1027- ATT DB Util: attribute handle is returned for new Services and Characteristics 1028 1029### Fixed 1030- Windows: retry serial port operations if not all bytes have been read/written 1031- HFP: avoid buffer overflows setting up messages 1032- SBC Decoder: improved error handling for invalid SBC audio data 1033- GAP: fix Connection Parameter Response in Central role 1034- ATT DB Util: update pointer to database in case of realloc 1035- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 1036- GAP: release HCI Connnection after gap_le_conne 1037- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 1038 1039--- 1040 1041## Changes December 2017 1042 1043### Added 1044- Introduced btstack_network.h network interface abstraction 1045- btstack_network_posix implementation using Linux tun/tap interface 1046- WICED: support for btstack_stdin (HAVE_STDIN) 1047- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 1048- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 1049- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 1050- LE Device DB TLV: overwrite oldest entry if no free entries available 1051- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 1052- Example/hid_host_demo with HID parser and support for basic US keyboard layout 1053- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 1054- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 1055 1056### Changed 1057- panu_demo: uses btstack_network.h now 1058- WICED: configure printf to replace Linefeed with CRLF 1059- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1060 1061### Fixed 1062- RFCOMM: support connection requests during connection failure 1063- L2CAP: support connection requests during connection failure 1064- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1065- HCI: avoid double free during halting 1066- SM: fixed reconnect using legacy pairing in slave role 1067 1068 1069