1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11## Added 12- HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned 13- GAP: support additional LE PHYs for scanning and outgoing connections 14- GATT Client: support GATT over BR/EDR via gatt_client_classic_connect 15- HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED 16- example: gatt_streamer_server and le_streamer_client report DLE and PHY changes 17- gatt_client: queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response 18- esp32: warn about unsuitable sdkconfig 19- esp32: add BTstack component config options via menuconfig 20- esp32: allow to disable default audio i2s driver via component config 21- esp32: support esp-idf v5.x audio driver 22- esp32: btstack_stdio_init configures buffered output, required for stdin support 23- nxp: support for bootloader version v1, e.g. NXP 88W8997 24- Port for Renesas RA6M4 with DA14531 25- Port for NXP Controller on POSIX (posix-h4-nxp) 26- Port for newer Infineon Controller on POSIX (posix-h4-bcm) that requires autobaud-mode 27 28## Removed 29- AVDTP Source: avdtp_source_stream_send_media_payload, use avdtp_source_stream_send_media_payload_rtp instead 30- A2DP Source: a2dp_source_stream_send_media_payload, use a2dp_source_stream_send_media_payload_rtp instead 31 32## Fixed 33- HCI: fix set extended scan response 34- HCI: fix report of extended advertisements with data len > 31 35- SM: fix value in SM_EVENT_NUMERIC_COMPARISON_REQUEST 36- btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS 37- gatt_client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle 38- A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout 39- A2DP: use samples as timestamp, fixes issue with Apple Airpods Pro 2nd Gen 40- PBAP Client: make pbap_set_property_selector work for Pull Phonebook 41- esp32: fix power amplifier control on Lyra T v4.3 42 43## Changed 44- GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE 45- bluetooth: indicated identity address in resolved address type names 46- chipset/bcm: look for PatchRAM file DEVICE_NAME...hcd 47- btstack_audio: added get_samplerate function to help with audio sample rate synchronization 48- btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE 49- esp32: drop support for Makefile projects from esp-idf 3.x 50- esp32: replace deprecated btstack_run_loop_freertos API calls 51- sco_demo_util: replace hfp_msbc by hfp_codec 52 53 54## Release v1.5.5 55 56### Added 57- hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_* 58- GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0) 59- example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device 60 61### Fixed 62- GAP: reload LE Resolving List after power-cycle 63- GAP: fix setting of LE Scan Response for data that needs to be fragmented 64- SM: fix pairing process with active ATT communication 65- ESP32: fix init for BR/EDR Only mode 66- ESP32: fix audio driver for sink + source mode 67- ESP32: fixes for ESP-IDF v5.x 68- ESP32: fix compile of non-BTstack examples after adding components/btstack 69 70### Changed 71- GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle 72- SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK 73- Mesh: move GATT Services into src/mesh/gatt-service 74- LE Audio: move GATT Services into src/le-audio/gatt-service 75- libusb: improve implementation 76 77## Known Issues 78- ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x 79 80 81## Release v1.5.4 82 83### Added 84- HFP HF: send custom AT command with hfp_hf_send_at_command 85- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 86- HFP HF: provide Call Waiting information alpha field 87- HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC 88- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 89- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 90- GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter 91- GAP: support BIG with gap_big_create and gap_big_terminate 92- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 93- GAP: support Periodic Advertisement Sync Transfer 94- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 95- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 96- Support for ESP32-C3 and ESP32-S3 97 98### Fixed 99- HCI: only add paired LE devices with IRK to resolving list 100- HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist 101- GAP: use static random address after power up 102- L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 103- SM: avoid potential loop during CTKD 104 105### Changed 106- HCI Dump: provide log level to log_message implementation 107- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 108 109 110## Release v1.5.3 111 112### Added 113- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 114- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 115- HFP HF: provide Calling Line Identification alpha field 116- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 117- GOEP Server 118- Chipset: support for firmware download and configuration of Realtek Controllers 119 120### Fixed 121- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 122- GAP: fix race condition that causes duplicate authenticate request 123- SM: address update for non-resolvable private addresses 124- SM: reset state on power off transition 125- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 126- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 127- HFP: try next link setting for SCO connection failure after SCO reject errors 128- HFP AG: activate all AG indicators upon service level connection establishment 129- HFP AG: handle call termination in alerting call state 130- HFP HF: fix parsing of phone number for voice tag 131- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 132 133### Changed 134- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 135- SM: pairing events indicate if LE Secure Connection will be used 136- A2DP: new a2dp.c contains shared code of Sink and Source roles 137- A2DP Sink: automatically configure stream endpoint for outgoing connections 138- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 139- libusb: command line options to delete TLV and specify log file path 140- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 141 142## Release v1.5.2 143 144### Added 145- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 146- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 147- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 148- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 149- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 150- GATT Service: Audio Input Control Service Server (AICS 1.0) 151- GATT Service: Microphone Control Service Server (MCS 1.0) 152- GATT Service: Volume Control Service Server (VCS 1.0) 153- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 154 155### Fixed 156- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 157- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 158- GAP: disable scanning, advertising, connection before updating random address 159- GAP: fix LE Scan with whitelist 160- HFP_AG: fix tracking for call dropped during outgoing ringing 161- HFP: Free HFP Connection object on SDP error / Service not found 162- PBAP Client: emit operation complete with status OBEX_ABORTED 163 164### Changed 165- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 166- GAP: set min encryption key size during init, if supported 167- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 168- ATT Server: use uint8_t for status returns 169- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 170 171 172## Release v1.5.1 173 174### Added 175- GOEP Client: add goep_client_version_20_or_higher 176- ESP32: implement audio source 177 178### Fixed 179- PBAP Client: support disconnect while operation is ongoing 180- PBAP Client: use SRM only if GOEP v2.0 or higher connection 181- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 182- L2CAP: limit remote MTU by local tx configuration in ERTM 183 184### Changed 185- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 186- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 187- ESP32: use I2S configuration from ESP32 LyraT V4.3 188 189 190## Release v1.5.0 191 192### Added 193- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 194- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 195- HCI: hci_remove_event_handler to remove packet handler 196- hci_cmd: support variable length fields and arrayed parameters 197- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 198- GAP: gap_set_page_timeout to set Page Timeout 199- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 200- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 201- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 202- A2DP: allow to register media codec validator for sink and source with: 203 - `a2dp_sink_register_media_config_validator` 204 - `a2dp_source_register_media_config_validator` 205- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 206- OBEX: new obex_parser for chunked OBEX data 207- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 208- SM: sm_remove_event_handler to remove packet handler 209- GATT Service: Bond Management Service (BMS 1.0) Server 210- GATT Service: Microphone Control Service (MICS 1.0) Server 211- GATT Service: TX Power Service (TPS 1.0) Server 212- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 213- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 214 215### Fixed 216- A2DP Source: fix reconfigure 217- AVRCP Controller: prevent registering of notifications for unsupported events 218- RFCOMM: fixed handling of remote port configuration command 219- HFP AG: fix accept incoming connection while audio connection is established 220- PBAP Client: handle chunked vCard Listing 221- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 222- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 223- SM: support storing bonding information for devices with identical IRK but different public addresses 224- GAP: restart advertising when private address changes 225- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 226 227### Changed 228- Drop iOS support 229- HCI: provide status instead of undocumented int error code and bool for API functions 230- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 231- GAP: local name, EIR data, class of device and default link policy can be updated at any time 232- L2CAP: provide status instead of undocumented int error code and bool for API functions 233- L2CAP: remote features not required for SDP connections 234- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 235- L2CAP: drop reason parameter in l2cap_disconnect 236- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 237- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 238- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 239- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 240- RFCOMM: provide status instead of undocumented int error code and bool for API functions 241- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 242- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 243- HFP: API functions return status code if appropriate 244- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 245- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 246- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 247- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 248- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 249- AVRCP: use PANEL as default unit + subunit info 250- AVRCP Controller: automatically query supported events when registering for notifications 251- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 252- Run Loop: new functionality for HCI transport drivers and inter-process communication: 253 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 254 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 255 - *btstack_run_loop_trigger_exit*: trigger run loop exit 256- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 257- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 258 259 260## Release v1.4.1 261 262### Added 263- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 264 265### Fixed 266- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 267- GAP: avoid requesting authentication twice 268- GAP: cache own address on start advertising and connecting, provide getters 269- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 270- SM: fix race condition between local address changes and pairing procedure 271- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 272 273### Changed 274- HCI: update advertising data without stopping advertising first 275- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 276- GAP: return status for `gap_set_security_mode` 277- GAP: abort legacy pairing if Level 4 is required 278- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 279- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 280- GAP: validate minimal service security level can be reached during pairing in responder role 281- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 282- CVE-2020-26555: reject connections to and from devices with same BD ADDR 283- CVE-2020-26555: ignore NULL link key 284- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 285 286## Release v1.4 287 288### Added 289- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 290- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 291- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 292 - support sending and receiving SLIP frames for HCI H5 293 - support odd parity 294 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 295- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 296- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 297- GATT Client: Battery Service Client 298- GATT Client: Device Information Service Client 299- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 300- GATT Client: Scan Parameters Service Client 301- GATT Server: Scan Parameters Service Server 302- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 303- GAP: support sniff subrating with `gap_sniff_subrating_configure` 304- GAP: support QoS setup with `gap_qos_set` 305- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 306- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 307- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 308- AVRCP Controller: reassemble fragmented AVCTP packets 309- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 310- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 311 312### Fixed 313- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 314- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 315- GAP: allow to disable link supervision timeout 316- GAP: fix `gap_connect` after `gap_connect_cancel` 317- GAP: re-configure advertisements after power cycle 318- HCI: handle start inquiry failure 319- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 320- L2CAP: return unknown mandatory option in config response 321- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 322- AVRCP Target: fix notification changed event 323- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 324- HFP HF: fix audio connection setup if codec negotiation is supported 325- HFP HF: only emit single event for RING and AG Status updates 326- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 327 328### Changed 329- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 330 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 331 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 332 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 333 - iOS: not supported 334- Run Loop Base: functionality used in most platform run loop implementations 335 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 336 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 337- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 338 - `posix/hci_dump_posix_fs` - writes binary log file 339 - `posix/hci_dump_stdout` - log to console using printf with local system time 340 - `embedded/hci_dump_embedded_stdout` - log to console using printf 341 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 342 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 343- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 344- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 345- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 346- POSIX Ports: use new `btstack_uart_posix` implementation 347- posix-h5/posix-h5-bcm: use even parity for UART 348- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 349- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 350- GAP: only store link key if it allows requested security level 351- GAP: abort SSP pairing if MITM protection required but not possible 352- SM: start pairing as Central for already encrypted connection on Slave Security Request 353- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 354- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 355- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 356 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 357- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 358 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 359- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 360- HFP: provide acl_handle in events to identify connection 361- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 362- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 363 364 365## Release v1.3.2 366 367### Added 368- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 369- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 370- HID Host: add profile, update `hid_host_demo.c` example 371 372### Fixed 373- L2CAP: make handling of HCI disconnect more robust 374- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 375- AVRCP: fix issue when Controller and Target send at the same time 376 377### Changed 378- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 379 380 381## Release v1.3 382 383### Added 384- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 385- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 386- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 387- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 388- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 389- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 390- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 391- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 392- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 393 394### Fixed 395- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 396- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 397- HFP AG/HSP AG: avoid connecting to remote service with same role 398- A2DP Source: support multiple Stream Endpoints with different Media Codec types 399- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 400- GATT Compiler: support multiple instances of the same service 401 402### Changed 403- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 404- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 405- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 406- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 407- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 408- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 409- Ports: STM32-F103RB Nucleo + CC256x port removed 410- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 411 412 413## Release v1.2.1 414 415### Fixed 416- L2CAP: use connection handle for channel lookups 417- L2CAP: forward data only in open state 418 419### Changed 420- L2CAP: check packet size against local mtu for classic basic channels 421 422 423## Release v1.2 424 425### Fixed 426- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 427- SM: fix update of sc flag for re-encrypted connection in peripheral role 428- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 429- ESP32: fix audio sink driver 430 431### Added 432- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 433- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 434- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 435- SM: emit events for re-encryption started/complete when bonding information is available 436 437### Changed 438- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 439- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 440 441 442## Changes October 2020 443 444### Fixed 445- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 446- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 447- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 448- SM: set LinkKey flag to request CTKD if enabled 449- SM: store CTKD key with Public Identity Address 450- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 451- SM: start SMP Timeout when sending Security Request 452- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 453- HCI: fix reject of LE remote connection param request via HCI 454 455### Added 456- GAP: add `gap_get_link_key_for_bd_addr` 457- GAP: add `gap_bonded` to check if bonding information is available for active connection 458- SM: support h7 for CTKD 459 460### Changed 461- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 462- SM: block connection if encryption fails for bonded devices as Central 463- SM: support pairing as Central after failed re-encryption 464 465 466## Release v1.1 467 468### Fixed 469- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 470 471### Added 472 473### Changed 474 475 476## Changes September 2020 477 478### Fixed 479- HFP: fix parsing of ranges e.g. in +CIND responses 480- AVDTP, AVRCP: fix bugs due to transaction id overrun 481- A2DP Source: fix issues with stream configuration by sink 482- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 483 484### Added 485- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 486- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 487 488### Changed 489- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 490- HSP, HFP: allow to configure usable SCO packet types 491- cc256x: update CC256xC init script to v1.4 492- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 493 494## Changes August 2020 495 496### Fixed 497- ESP32: fix authentication for incoming Secure Connections 498- AVDTP: Fix forwarding of Delay reports 499- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 500- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 501 502### Added 503- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 504- GAP: request role change for classic connection via `gap_request_role` 505- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 506- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 507- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 508- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 509- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 510- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 511 512### Changed 513- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 514- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 515- example/hid_host_demo: try to become master for incoming connections 516- btstack_run_loop: use btstack_assert instead of local while(true) 517- att_db_util: allow to reset att_db via `att_db_util_init` 518 519## Changes July 2020 520 521### Fixed 522- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 523- AVDTP: handle concurrent signaling establishment with reject and retry 524 525### Added 526- example/hid_host_demo: support reconnect from HID device 527- Crypto: support software AES128 for AES-CCM operations 528- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 529- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 530- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 531- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 532- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 533 534### Changed 535- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 536 537 538## Changes June 2020 539 540### Fixed 541- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 542- SM: Fix validation of confirm value for secure connection Passkey entry 543- AVRCP: handle concurrent signaling establishment with reject and retry 544 545### Added 546- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 547- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 548- Windows port for Dialog DA14585 connected via serial port 549 550## Changes 551- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 552 553## Changes May 2020 554 555### Fixed 556- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 557- pbap_client: fix PBAP UUID len on connect message 558- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 559- A2DP Source: only connect to remote sink stream endpoints 560- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 561- hsp_hs: fix disconnect if audio not connected 562- hsp_ag: fix accept incoming connection 563 564### Added 565- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 566- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 567- cc256x: allow to specify power vector for each modulation type 568- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 569- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 570- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 571 572### Changed 573- L2CAP ERTM: send extended features request only once per HCI connection 574 575 576## Changes April 2020 577 578### Fixed 579- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 580- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 581 582### Added 583- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 584- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 585- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 586 587### Changed 588- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 589- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 590- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 591 592 593## Changes March 2020 594 595### Fixed 596- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 597- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 598 599### Added 600- GATT Client: allow to register for any notification/indication and/or any connection 601- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 602- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 603- btstack_util: added btstack_replace_bd_addr_placeholder 604 605### Changed 606- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 607- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 608 609 610## Changes Februar 2020 611 612### Fixed 613- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 614- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 615 616### Changed 617- hid_host_mode: allow sniff mode 618 619### Added 620- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 621 622 623## Changes January 2020 624 625### Fixed 626- L2CAP ERTM: avoid read-after-free on decline of incoming connection 627- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 628- att_db_util: fix realloc of att db buffer for large attributes 629- btstack_tlv_posix: only keep last value in memory, fix delete operation 630- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 631 632### Added 633- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 634- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 635- ATT Server: validate request pdu length 636 637### Changed 638- Crypto: update AES-CMAC implementation to access all message bytes sequentially 639 640 641## Changes December 2019 642 643### Fixed 644- example/pan_lwip_http_server: use Network Access Point, CoD 645- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 646 647### Added 648 649### Changed 650- Updated CC256x initscript: CC256xC v1.3 651- ESP32: add CMake project files 652 653 654## Changes November 2019 655 656### Fixed 657- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 658- L2CAP: send LE Data Channel SDUs round robin with other data 659- L2CAP ERTM: send ERTM I-frames round robin with other data 660 661### Added 662- ATT Server: return error if request to send now for Notification or Indication already registered 663- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 664- btstack_run_loop_remove: return bool true if timer/data source was removed 665- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 666- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 667- lwip: add download test files to http server demo 668 669### Changed 670- Linked List: return bool true if item was removed 671 672 673## Changes October 2019 674 675### Fixed 676 677### Added 678- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 679- provide `btstack_assert(condition)` 680- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 681 682### Changed 683- libusb and posix ports: store bonding information in TLV 684 685 686## Changes September 2019 687 688### Fixed 689- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 690- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 691- GATT Client: allow Write Without Response independent of other requests 692 693### Added 694- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 695- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 696 697### Changed 698- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 699- bluetooth.h: extract internal defintitions to respective protocol layers 700- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 701 702 703## Changes August 2019 704 705### Fixed 706- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 707- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 708- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 709- L2CAP ERTM: stop timers on disconnect 710- L2CAP ERTM: fix sending of segmented SDUs 711- L2CAP ERTM: handle unsupported Information Response 712- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 713 714### Added 715- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 716 717## Changed 718- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 719- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 720- POSIX: use monotonic clock as timebase if available 721- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 722- HCI: Read Encryption Key Size after encryption was enabled 723- Errata 11838: 724 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 725 - GAP: validate encryption key size to emit GAP Security Levels 726 727## Changes July 2019 728 729### Fixed 730- SM: Fixed regression introduced in f3582630 731- L2CAP: avoid reading l2cap signaling command len out of bounds 732- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 733 734### Changed 735- SM: Start encryption upon receiving slave securiy request if bonded 736- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 737 738--- 739 740## Changes June 2019 741 742### Changed 743- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 744- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 745- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR 746 747### Fixed 748- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 749- libusb: avoid use-after-free for SCO packets on disconnect 750 751### Added 752- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 753- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 754- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 755 756--- 757 758## Changes May 2019 759 760### Changed 761- ESP32: Configure SCO over HCI after power up 762- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 763 is defined, an explicit delete field is used to indicate an invalid entry. 764 765### Fixed 766- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 767 768### Added 769- gatt_client: emit query complete event for signed write operation 770- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 771 772--- 773 774## Changes April 2019 775 776### Changed 777- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 778 779### Fixed 780- hci: pad LE Scan response with zeroes 781- SM: store local CSRK 782- ATT DB: call write callback for validated signed writes 783- ATT Server: abort signed write validation on incoming new request 784- Bluetooth SIG web scraping tools updated 785- libusb: compiles for FreeBSD 786 787### Added 788 789--- 790 791## Changes March 2019 792 793### Changed 794- use Makefile for stm32-f4discovery-cc256x port 795- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 796 797### Fixed 798- SM: Use provided authentication requirements in slave security request 799 800### Added 801- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 802- SM: Track if connection encryption is based on LE Secure Connection pairing 803- ATT DB: Validate if connection encrypted is based on SC if requested 804- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 805- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 806- ESP32: erase nvs flash is newer nvs version found 807- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 808- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 809 810## Changes February 2019 811 812### Changed 813- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 814- btstack_audio: split interface into sink and source 815 816### Fixed 817- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 818- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 819 820### Added 821- example/a2dp_sink_demo: add target role, support volume control on both devices 822- example/audio_duplex: playback audio audio source on audio sink (test audio path) 823- btstack_audio_embedded: implement audio source path 824 825--- 826 827## Changes January 2019 828 829### Changed 830- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 831- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 832 833### Added 834- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 835- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 836- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 837- ad_parser: validate data element length fields in ad_iterator_has_more 838- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 839 840### Fixed 841- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 842- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 843- Crypto: directly process queued crypto operation on HCI result 844 845--- 846 847## Changes December 2018 848 849### Added 850- SM: generate and store ER / IR keys in TLV, unless manually set by application 851- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 852 853### Fixed 854- SM: fix internal buffer overrun during random address generation 855 856## Changes November 2018 857 858### Added 859- GAP: gap_le_connection_interval provides connection interval for conn handle 860- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 861- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 862- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 863- SM: generate and store ER / IR keys in TLV, unless manually set by application 864 865### Fixed 866- SM: prevent random address updates if gap_random_address_set was used 867- SM: fix internal buffer overrun that can cause storing of bonding information to fail 868- SM: ignore Slave Security Request after sending own Pairing Request 869- L2CAP: fix use after free on disconnect if ERTM is enabled 870- HFP: Handle multiple commands/responses in single RFCOMM packet 871- Memory Pools: clear all buffers before use 872 873--- 874 875## Changes October 2018 876 877### Added 878- SDP Server: queue incoming connections when already connected instead of rejecting them 879- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 880- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 881 882### Fixed 883- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 884- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 885- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 886- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 887- L2CAP ERTM: fix outgoing fragment management 888- HFP: decline incoming RFCOMM connection after outgoing connection was started 889- AVRCP: fix crash on disconnect of connection established by remote 890 891--- 892 893## Changes September 2018 894 895### Fixed 896- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 897- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 898- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 899- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 900- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 901- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 902- RFCOMM: Avoid use-after-free on channel finalize 903- GATT Client: stop timer on disconnect - fixes use after free / crash 904 905### Added 906- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 907- 3rd-party: yxml is used for PBAP vCard list parsing 908- cc256xC: new v1.1 init scripts 909 910--- 911 912## Changes August 2018 913 914### Added 915- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 916 917### Fixed 918- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 919- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 920- SM: drop LTK flag from Pairing Response for Secure Connections 921- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 922 923## Changes June 2018 924 925### Added 926- btstack_audio.h: application level API for audio playback and recording 927- embedded/hal_audio.h: low-level API for audio playback and recording 928- HID Device: hid_device_connect(..) function 929- ESP32: implement hal_audio 930- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 931- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 932 933### Changed 934- Errata 10734: 935 - SM: Generate new EC Public Keypair after each pairing 936 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 937- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 938- windows: ignore virtual Bluetooth adapter provided by VMware 939- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 940 941--- 942 943## Changes June 2018 944 945### Fixed 946- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 947- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 948- AVRCP Controller: fix parsing of now playing info 949 950### Changed 951- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 952 953### Added 954- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 955 956--- 957 958## Changes May 2018 959 960### Added 961- GAP: re-encrypt outgoing connection if bonded 962- ATT Server: wait until re-encryption is complete 963- GATT Client: wait until re-encryption is complete 964- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 965- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 966 967### Changed 968- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 969 970### Fixed 971- SM: Fix LE Secure Connection pairing in Central role 972- le_device_db_tlv: fix seq nr management 973- SM: improve le_device_db lookup and storing of IRK 974- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 975- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 976 977--- 978 979## Changes April 2018 980 981### Added 982- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 983- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 984- Embedded: support btstack_stdin via SEGGER RTT 985 986### Changed 987- att_db_util: added security requirement arguments to characteristic creators 988- SM: use btstack_crypto for cryptographpic functions 989- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 990 991### Fixed 992- HFP: fix answer call command 993- HCI: fix buffer overrun in gap_inquiry_explode 994- SDP: free service record item on sdp_unregister_service 995 996## Changes March 2018 997 998### Added 999- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 1000- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 1001- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 1002 1003### Fixed 1004- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 1005- HSP HS: accept incomming SCO connection 1006- SM: fix iteration over LE Device DB entries for bonding and address resolving 1007- SM: store pairing information only if both devices have requested bonding 1008 1009--- 1010 1011## Changes February 2018 1012 1013### Added 1014- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 1015- SM: new event SM_EVENT_PAIRING_COMPLETE 1016- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 1017- GAP: add gap_delete_all_link_keys 1018 1019### Changed 1020- GATT Client: round robin for multiple connections 1021- ATT Dispatch: round robin for ATT Server & GATT Client 1022- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 1023- btstack_link_key_db: addition functions for link key iteration 1024- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 1025- CSR: set all keys in psram instead of default 1026 1027### Fixed 1028- tc3556x: fix startup after baud rate change 1029 1030--- 1031 1032## Changes January 2018 1033 1034### Added 1035- Port for Windows with Zephyr HCI Firmware connected via serial port 1036- em9304: upload patch containers during HCI bootup 1037- Makefile for STM32-F4Discovery port 1038- support for console out via SEGGER RTT 1039- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 1040- LE Streamer Client can send as fast as possbile as well 1041- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 1042 1043### Changed 1044- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 1045- GAP: gap_set_connection_parameters includes scan interval and window params 1046- GATT Client: GATT_EVENT_MTU indicates max MTU 1047- ATT DB Util: attribute handle is returned for new Services and Characteristics 1048 1049### Fixed 1050- Windows: retry serial port operations if not all bytes have been read/written 1051- HFP: avoid buffer overflows setting up messages 1052- SBC Decoder: improved error handling for invalid SBC audio data 1053- GAP: fix Connection Parameter Response in Central role 1054- ATT DB Util: update pointer to database in case of realloc 1055- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 1056- GAP: release HCI Connnection after gap_le_conne 1057- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 1058 1059--- 1060 1061## Changes December 2017 1062 1063### Added 1064- Introduced btstack_network.h network interface abstraction 1065- btstack_network_posix implementation using Linux tun/tap interface 1066- WICED: support for btstack_stdin (HAVE_STDIN) 1067- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 1068- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 1069- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 1070- LE Device DB TLV: overwrite oldest entry if no free entries available 1071- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 1072- Example/hid_host_demo with HID parser and support for basic US keyboard layout 1073- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 1074- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 1075 1076### Changed 1077- panu_demo: uses btstack_network.h now 1078- WICED: configure printf to replace Linefeed with CRLF 1079- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1080 1081### Fixed 1082- RFCOMM: support connection requests during connection failure 1083- L2CAP: support connection requests during connection failure 1084- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1085- HCI: avoid double free during halting 1086- SM: fixed reconnect using legacy pairing in slave role 1087 1088 1089