1# Change Log 2All notable changes to this project will be documented in this file. 3 4The format is based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/) 5and this project adheres to [Semantic Versioning](http://semver.org/spec/v2.0.0.html). 6 7--- 8 9## Unreleased 10 11### Added 12- HCI: configure Classic ACL packet types with hci_enable_acl_packet_types 13- GAP: generic GAP_SUBEVENT_LE_CONNECTION_COMPLETE 14- L2CAP: additional authorization_required param in l2cap_ecbm_register_service 15- GATT Client: support GATT over Enhanced LE Bearer 16- GATT Server: support GATT over Enhanced LE Bearer 17- A2DP: support SDP record without service name and/or provider 18- AVRCP: support SDP record without service name and/or provider 19- HFP: hfp_hf_create_sdp_record_with_codecs and hfp_hf_create_sdp_record_with_codecs 20- HFP: support SDP record without service name 21 HFP: support for LC3-SWB 22- SPP Server: support SDP record without service name 23- HOG Device: emit HIDS_SUBEVENT_SET_REPORT 24- HOG Device: provide report for GET REPORT operation via callback 25- SBC Codec: new interface allows for multiple instances 26- LE Device DB: le_device_db_dump dumps LTK 27- Port for Zephyr 3.x 28 29### Fixed 30- HCI: fix remove le device from whitelist 31- HCI: fix restart connect with whitelist after whitelist modification 32- L2CAP: make l2cap_get_remote_mtu_for_local_cid available to LE-only builds 33- HFP: use 'don't care' to accept SCO connections, fixes issue on ESP32 34- HFP: fix LC3-WB init 35- HFP AG: fix setup of audio connection in service level established event 36- HFP AG: fix BCM WBS setup 37- HFP HF: send 'deactivate EC/NR' if supported in AG 38- HID Device: set Report Mode as default 39- HID Host: support large HID Descriptors 40- AVDTP: limit L2CAP MTU to largest BR/EDR packet, fixes A2DP Sink role for some Samsung TV 41- AVRCP: reject incoming second l2cap connection 42- AVRCP: generate command for avrcp_controller_get_element_attributes dynamically 43- SPP Server: fix SPP version in SDP record 44- GATT Client: ignore notifications/indications until re-encrypted for bonded device without ENABLE_LE_PROACTIVE_AUTHENTICATION 45- btstack_flash_bank: support alignment larger than 4 46- windows: fix timestamps in packet logs 47 48### Changed 49- HCI: simplified implicit SCO flow control 50- HCI: return ERROR_CODE_COMMAND_DISALLOWED for outgoing connections in gap_connect 51- AVRCP: shorten default SDP Service and Provider Names 52- GATT Client: emit query complete event for gatt_client_discover_characteristic_descriptors in next run loop iteration 53- HFP: report HFP Version 1.9 in SDP record 54- HID Parser: ignore Report Items without Usage 55- btstack_crypto: allow MBEDTLS config via MBEDTLS_CONFIG_FILE 56- remove old Zephyr 1.9 port 57 58 59## Release v1.5.6 60 61### Added 62- HCI: HCI_ACL_CHUNK_SIZE_ALIGNMENT allows to keep HCI transport writes aligned 63- GAP: support additional LE PHYs for scanning and outgoing connections 64- GATT Client: allow to queue requests with gatt_client_request_to_send_gatt_query and gatt_client_request_to_write_without_response 65- GATT Client: support GATT over BR/EDR transport via gatt_client_classic_connect 66- HFP: provide SCO packet types and rx/tx packet lengths in HFP_SUBEVENT_AUDIO_CONNECTION_ESTABLISHED 67- HFP: allow to register custom at commands with hfp_hf_register_custom_at_command 68- HFP: experimental support for LC3-SWB from HFP SWB draft with ENABLE_HFP_SUPER_WIDE_BAND_SPEECH 69- AVRCP: support Cover Art via avrcp_cover_art_client 70- example: gatt_streamer_server and le_streamer_client report DLE and PHY changes 71- NXP: support for NXP Controller with bootloader versions v1, e.g. NXP 88W8997, and v3, e.g. NXP IW416 or IW61x 72- esp32: support esp-idf v5.x audio driver 73- esp32: warn about sdkconfig issues 74- esp32: add BTstack component config options via menuconfig 75- esp32: allow to disable default audio i2s driver via component config 76- esp32: btstack_stdio_init configures buffered output, required for stdin support 77- Port for Renesas RA6M4 with DA14531 78- Port for NXP Controller on POSIX (posix-h4-nxp) 79- Port for newer Infineon Controller on POSIX (posix-h4-bcm) that requires autobaud-mode 80 81### Fixed 82- HCI: fix set extended scan response 83- HCI: fix report of extended advertisements with data len > 31 84- HCI: fix CTKD in Initiator role over BR/EDR SC when using dedicated bonding 85- SM: fix value in SM_EVENT_NUMERIC_COMPARISON_REQUEST 86- SM: ignore Security Request during re-encryption 87- GATT Client: return ERROR_CODE_UNKNOWN_CONNECTION_IDENTIFIER for invalid connection handle 88- A2DP: emit A2DP_SUBEVENT_STREAM_ESTABLISHED with if connection fails, e.g. because of Page Timeout 89- A2DP Source: a2dp_source_stream_send_media_payload was removed, use a2dp_source_stream_send_media_payload_rtp instead 90- A2DP: use samples as timestamp, fixes issue with Apple Airpods Pro 2nd Gen 91- AVDTP Source: avdtp_source_stream_send_media_payload was removed, use avdtp_source_stream_send_media_payload_rtp instead 92- AVRCP: re-register for notification 93- BNEP: validate UUID32 and UUID128 service in connect request 94- HFP: fix setup/accept of synchronous connection 95- HFP: use mandatory safe settings considering BR/EDR Secure Connections to accept synchronous connections 96- HFP: avoid SCO packet types not supported either locally or remotely 97- HFP: remove trailing newline/carriage return in custom command event 98- PBAP Client: make pbap_set_property_selector work for Pull Phonebook 99- btstack_stdin_embedded: use timer to poll RTT input, fix for tickless RTOS 100- esp32: fix audio power amplifier control on Lyra T v4.3 board 101- tool/convert_gatt_service: removed as GATT Service descriptions not available on Bluetooth SIG web site 102 103### Changed 104- GAP: add gap_set_peer_privacy_mode with default LE_PRIVACY_MODE_DEVICE 105- GAP: use stack defaults for LE Connection Parameter Updates 106- GAP: set minimum and maximum CE length to 0 107- GAP: ENABLE_EXPLICIT_DEDICATED_BONDING_DISCONNECT disables disconnect after dedicated bonding 108- GOEP Client: support multiple instances 109- A2DP Sink: drop unused local seid argument in a2dp_sink_establish_stream 110- HFP: emit HFP_SUBEVENT_CUSTOM_AT_MESSAGE_SENT after sending custom command / unsolicited response code 111- sco_demo_util: replace hfp_msbc by hfp_codec 112- BCM: look for PatchRAM file with prefix DEVICE_NAME and extension '.hcd' 113- bluetooth: indicated identity address in resolved address type enums name 114- btstack_audio: added get_samplerate function to help with audio sample rate synchronization 115- btstack_flash_bank: write empty tag instead of overwriting existing tag with ENABLE_TLV_FLASH_WRITE_ONCE 116- esp32: drop support for Makefile projects from esp-idf 3.x 117- esp32: avoid deprecated btstack_run_loop_freertos API calls 118- esp32: use sample rate compensation in a2dp_sink_demo 119- stm32-f4discovery-cc256x: use external oscillator for better I2S clock 120- stm32-f4discovery: use sample rate compensation in a2dp_sink_demo 121 122 123## Release v1.5.5 124 125### Added 126- hci_dump_stdout: allow to truncate ACL, SCO and ISO packets with HCI_DUMP_STDOUT_MAX_SIZE_* 127- GATT Service: Broadcast Audio Scan Service Server and Client (BASS 1.0) 128- example/a2dp_source_demo: add command to scan and connect to Bluetooth speaker by class of device 129 130### Fixed 131- GAP: reload LE Resolving List after power-cycle 132- GAP: fix setting of LE Scan Response for data that needs to be fragmented 133- SM: fix pairing process with active ATT communication 134- ESP32: fix init for BR/EDR Only mode 135- ESP32: fix audio driver for sink + source mode 136- ESP32: fixes for ESP-IDF v5.x 137- ESP32: fix compile of non-BTstack examples after adding components/btstack 138 139### Changed 140- GAP: reload LE Filterlist and Periodic Advertiser List after power-cycle 141- SM: delete bonding information for existing device with BD_ADDR on new pairing with different IRK 142- Mesh: move GATT Services into src/mesh/gatt-service 143- LE Audio: move GATT Services into src/le-audio/gatt-service 144- libusb: improve implementation 145 146## Known Issues 147- ESP32: audio driver for ES8388/LyraT v4.3 not updated for esp-idf 5.x 148 149 150## Release v1.5.4 151 152### Added 153- HFP HF: send custom AT command with hfp_hf_send_at_command 154- HFP HF: terminate held calls with hfp_hf_terminate_held_calls 155- HFP HF: provide Call Waiting information alpha field 156- HFP HF: add hfp_hf_set_default_microphone_gain and hfp_hf_set_set_default_speaker_gain for SLC 157- HFP AG: support handling of custom AT commands with hfp_ag_register_custom_at_command 158- HFP AG: send custom unsolicited result code with hfp_ag_send_unsolicited_result_code 159- GAP: allow to enable duplicate filter for LE scanning with gap_set_scan_duplicate_filter 160- GAP: support BIG with gap_big_create and gap_big_terminate 161- GAP: support BIG Sync gap_big_sync_create and gap_big_sync_terminate 162- GAP: support Periodic Advertisement Sync Transfer 163- port: CMake build files in all windows-* ports allow to use Visual Studio 2022 164- embedded audio: mono audio is played on both channels if HAVE_HAL_AUDIO_SINK_STEREO_ONLY is defined 165- Support for ESP32-C3 and ESP32-S3 166 167### Fixed 168- HCI: only add paired LE devices with IRK to resolving list 169- HCI: send HCI LE Create Connection Cancel only once for outgoing LE connections without whitelist 170- GAP: use static random address after power up 171- L2CAP: fix L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 172- SM: avoid potential loop during CTKD 173 174### Changed 175- HCI Dump: provide log level to log_message implementation 176- GAP: replace BTSTACK_EVENT_DISCOVERABLE_ENABLED with BTSTACK_EVENT_SCAN_MODE_CHANGED 177 178 179## Release v1.5.3 180 181### Added 182- GAP: support periodic advertising with ENABLE_LE_PERIODIC_ADVERTISING 183- GAP: support periodic inquiry mode with gap_inquiry_periodic_start 184- HFP HF: provide Calling Line Identification alpha field 185- HFP HF: emit HFP_SUBEVENT_TRANSMIT_DTMF_CODES after sending DTMF command 186- GOEP Server 187- Chipset: support for firmware download and configuration of Realtek Controllers 188 189### Fixed 190- GAP: fix gap_connect_cancel for gap_connect_with_whitelist 191- GAP: fix race condition that causes duplicate authenticate request 192- SM: address update for non-resolvable private addresses 193- SM: reset state on power off transition 194- L2CAP: Fix accept incoming ERTM connection when Information Request already complete 195- A2DP Sink: fix config API for AAC, ATRAC, and other codecs 196- HFP: try next link setting for SCO connection failure after SCO reject errors 197- HFP AG: activate all AG indicators upon service level connection establishment 198- HFP AG: handle call termination in alerting call state 199- HFP HF: fix parsing of phone number for voice tag 200- HFP HF: report HFP_SUBEVENT_NETWORK_OPERATOR_CHANGED event 201 202### Changed 203- HCI: use ERROR_CODE_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS to rejected classic connections 204- SM: pairing events indicate if LE Secure Connection will be used 205- A2DP: new a2dp.c contains shared code of Sink and Source roles 206- A2DP Sink: automatically configure stream endpoint for outgoing connections 207- HFP AG: drop unused number parameter from hfp_ag_outgoing_call_initiated 208- libusb: command line options to delete TLV and specify log file path 209- Windows: native implementations of btstack_tlv_window, hci_dump_windows_fs, hci_dump_window_stdout 210 211## Release v1.5.2 212 213### Added 214- GAP: ENABLE_HCI_SERIALIZED_CONTROLLER_OPERATIONS serializes Inquiry, Remote Name Request and Create Connection operations 215- GAP: support extended advertising with ENABLE_LE_EXTENDED_ADVERTISING 216- GAP: gap_enable_link_watchdog() uses automatic flush timeout to disconnect if data cannot be sent 217- GAP: gap_secure_connections_active() to query if BR/EDR Secure Connecions are possible 218- ATT DB: provide gatt_server_get_handle_range_for_service_with_uuid16 to find included service within handle range 219- GATT Service: Audio Input Control Service Server (AICS 1.0) 220- GATT Service: Microphone Control Service Server (MCS 1.0) 221- GATT Service: Volume Control Service Server (VCS 1.0) 222- GATT Service: Volume Offset Control Service Server (VOCS 1.0) 223 224### Fixed 225- POSIX: fix RTS/CTS configuration by keeping local termios copy in btstack_uart_posix 226- HCI: fix handling of HCI Connection Complete with error (regression introduced in v1.5.1) 227- GAP: disable scanning, advertising, connection before updating random address 228- GAP: fix LE Scan with whitelist 229- HFP_AG: fix tracking for call dropped during outgoing ringing 230- HFP: Free HFP Connection object on SDP error / Service not found 231- PBAP Client: emit operation complete with status OBEX_ABORTED 232 233### Changed 234- Chipset: use da145xx in folder/file/function names for Dialog Semiconductor SoCs 235- GAP: set min encryption key size during init, if supported 236- AVDTP: use BLUETOOTH_SERVICE_CLASS_AUDIO_SINK / SOURCE instead of BLUETOOTH_PROTOCOL_AVDTP in SDP queries 237- ATT Server: use uint8_t for status returns 238- libusb, POSIX and Windows ports: use '-' instead of ':' in btstack_BD_ADDR.tlv filename 239 240 241## Release v1.5.1 242 243### Added 244- GOEP Client: add goep_client_version_20_or_higher 245- ESP32: implement audio source 246 247### Fixed 248- PBAP Client: support disconnect while operation is ongoing 249- PBAP Client: use SRM only if GOEP v2.0 or higher connection 250- PBAP Client: emit vCard entry data as PBAP_DATA_PACKET 251- L2CAP: limit remote MTU by local tx configuration in ERTM 252 253### Changed 254- Example: init SM if LE supported to avoid issue with Android Cross-Transport Key-Derivation 255- ESP32: update sdkconfig for esp-idf v4.3, disable Bluedroid host stack 256- ESP32: use I2S configuration from ESP32 LyraT V4.3 257 258 259## Release v1.5.0 260 261### Added 262- HCI Dump: Support BTSnoop format in hci_dump_posix_fs.c for format = HCI_DUMP_BTSNOOP 263- HCI Dump RTT STDOUT: drop messages if RTT buffer is full and RTT is configured for non-blocking 264- HCI: hci_remove_event_handler to remove packet handler 265- hci_cmd: support variable length fields and arrayed parameters 266- GAP: ENABLE_EXPLICIT_LINK_KEY_REPLY allows for asynchronous link key lookup by application 267- GAP: gap_set_page_timeout to set Page Timeout 268- GAP: gap_inquiry_set_scan_activity to set Inquiry Scan Activity 269- L2CAP: emit L2CAP_EVENT_INFORMATION_RESPONSE event with extended features and fixed channels supported 270- L2CAP: support Enhanced Credit-based Flow-Control Mode for connection-oriented channels over BR/EDR/LE 271- A2DP: allow to register media codec validator for sink and source with: 272 - `a2dp_sink_register_media_config_validator` 273 - `a2dp_source_register_media_config_validator` 274- A2DP Sink: allow accept or reject of stream start on A2DP_SUBEVENT_START_STREAM_REQUESTED when ENABLE_AVDTP_ACCEPTOR_EXPLICIT_START_STREAM_CONFIRMATION is defined 275- OBEX: new obex_parser for chunked OBEX data 276- SM: Support Cross-Transport Key-Derivation (CTKD) of LE LTK from BR/EDR SC Link Key in Responder role 277- SM: sm_remove_event_handler to remove packet handler 278- GATT Service: Bond Management Service (BMS 1.0) Server 279- GATT Service: Microphone Control Service (MICS 1.0) Server 280- GATT Service: TX Power Service (TPS 1.0) Server 281- POSIX: btstack_signal allows to register for callback on signal, e.g. ctrl-c 282- Windows: btstack_stdin_window_register_ctrl_c_callback allows to register for ctrl-c 283 284### Fixed 285- A2DP Source: fix reconfigure 286- AVRCP Controller: prevent registering of notifications for unsupported events 287- RFCOMM: fixed handling of remote port configuration command 288- HFP AG: fix accept incoming connection while audio connection is established 289- PBAP Client: handle chunked vCard Listing 290- PBAP Client: use new streaming obex_parser to handle chunked OBEX data 291- SM: Work around for unexpected Windows 10 disconnect for BR Secure Connections (SMP over BR timeout) 292- SM: support storing bonding information for devices with identical IRK but different public addresses 293- GAP: restart advertising when private address changes 294- le_device_db_tlv: keep number of devices reported by le_device_db_count if old entry is replaced 295 296### Changed 297- Drop iOS support 298- HCI: provide status instead of undocumented int error code and bool for API functions 299- HCI: use 1000 ms watchdog to force power off for hci_power_control(HCI_POWER_OFF) 300- GAP: local name, EIR data, class of device and default link policy can be updated at any time 301- L2CAP: provide status instead of undocumented int error code and bool for API functions 302- L2CAP: remote features not required for SDP connections 303- L2CAP: replaced l2cap_register_packet_handler with l2cap_add_event_handler to register multiple handlers 304- L2CAP: drop reason parameter in l2cap_disconnect 305- L2CAP: use official terminology for L2CAP channel modes - ENABLE_L2CAP_LE_CREDIT_BASED_FLOW_CONTROL_MODE replaces ENABLE_LE_DATA_CHANNELS 306- L2CAP: unify API for can send now, request to send, and send packet and disconnect channel 307- L2CAP: unify events for can send now, packet sent, channel closed (CbM/ECBM using existing events) 308- RFCOMM: `RFCOMM_EVENT_PORT_CONFIGURATION` contains rfcomm_cid and remote flag, emitted for query config 309- RFCOMM: provide status instead of undocumented int error code and bool for API functions 310- RFCOMM: remote port configuration, line status, and modem status are sent by channel state machine 311- HSP: add ACL Connection to all events and BD ADDR to HSP_SUBEVENT_RFCOMM_CONNECTION_COMPLETE 312- HFP: API functions return status code if appropriate 313- HFP: removed one parameter from hfp_ag/hf_activate_voice_recognition function, introduce hfp_ag/hf_deactivate_voice_recognition instead 314- HFP: merged legacy and enhanced Voice Recognition Activation (VRA) API. If available enhanced mode will be preferred. 315- HFP: separate events for activation (HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED) and deactivation (HFP_SUBEVENT_VOICE_RECOGNITION_DEACTIVATED) instead of combined HFP_SUBEVENT_VOICE_RECOGNITION_STATUS with status field. HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED contains field "enhanced" to indicate if enhanced mode is used. 316- HFP: enhanced VRA: HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED is emitted after VRA is ready and the the audio connection is established. This simplifies HFP HF client logic, i.e. client can call `hfp_hf_enhanced_voice_recognition_report_ready_for_audio directly` upon reception of HFP_SUBEVENT_VOICE_RECOGNITION_ACTIVATED event. 317- AVDTP: media config validator is called with preview of media codec configuration event and configured separately for sink/source 318- AVRCP: use PANEL as default unit + subunit info 319- AVRCP Controller: automatically query supported events when registering for notifications 320- AVRCP Target: cache companies and events in library and remove need to answer query in application callback. Use Bluetooth SIG as default company. 321- Run Loop: new functionality for HCI transport drivers and inter-process communication: 322 - *btstack_run_loop_poll_data_sources_from_irq*: used to transfer control from IRQ handler to main thread/run loop 323 - *btstack_run_loop_execute_on_main_thread*: schedule code execution on main thread from other thread 324 - *btstack_run_loop_trigger_exit*: trigger run loop exit 325- POSIX / Windows / Raspi / Qt: use updated ctrl-c handling 326- POSIX TLV: use max value size of 2048, assert in store function if value size is larger 327 328 329## Release v1.4.1 330 331### Added 332- GAP: emit GAP_EVENT_PAIRING_STARTED and GAP_EVENT_PAIRING_COMPLETE 333 334### Fixed 335- GAP: store link key in hci connection struct to allow authenticate after pairing without bonding 336- GAP: avoid requesting authentication twice 337- GAP: cache own address on start advertising and connecting, provide getters 338- GAP: stop LE connecting if create connection fails (e.g. connectable adv active and multiple roles not supported) 339- SM: fix race condition between local address changes and pairing procedure 340- ATT DB: fix spelling `gatt_server_get_handle_range_for_service_with_uuid128`, `gatt_server_get_handle_range_for_service_with_uuid16` 341 342### Changed 343- HCI: update advertising data without stopping advertising first 344- GAP: Drop local bonding flag in IO Capability Reply if remote does not indicate bonding 345- GAP: return status for `gap_set_security_mode` 346- GAP: abort legacy pairing if Level 4 is required 347- GAP: abort SSP on IO Capabilities Request event if Level 4 is required but SC not supported by remote 348- GAP: abort SSP on User Confirmation Request event if Level 3 is required but MITM protection not possible 349- GAP: validate minimal service security level can be reached during pairing in responder role 350- L2CAP: don't trigger hci disconnect if l2cap security requirements are insufficient 351- CVE-2020-26555: reject connections to and from devices with same BD ADDR 352- CVE-2020-26555: ignore NULL link key 353- CVE-2020-26558: abort LE Secure Connection pairing if remote uses the same public key 354 355## Release v1.4 356 357### Added 358- HCI: `btstack_transport_sco.h` supports SCO over physical PCM/I2S interface (`HAVE_SCO_TRANSPORT`) 359- POSIX: `btstack_transport_sco_i2s_test_bridge.c` implements SCO transport interface for UART-to-I2S test bridge 360- btstack_uart: `btstack_uart_t` interface extends `btstack_uart_block_t`: 361 - support sending and receiving SLIP frames for HCI H5 362 - support odd parity 363 - `hci_transport_h4` and chipset drivers have new functions to provide `btstack_uart_t` 364- btstack_uart_slip_wrapper: wrapper that implements SLIP functionality for existing `btstack_uart_block` drivers. 365- hci_transport: add parity field and pass on to `btstack_uart_t` in h4 and h5 366- GATT Client: Battery Service Client 367- GATT Client: Device Information Service Client 368- GATT Client: HID-over-GATT (HOG) Client, Report and Boot Host 369- GATT Client: Scan Parameters Service Client 370- GATT Server: Scan Parameters Service Server 371- GAP: support scan page configuration with `gap_set_page_scan_activity` and `gap_set_page_scan_type` 372- GAP: support sniff subrating with `gap_sniff_subrating_configure` 373- GAP: support QoS setup with `gap_qos_set` 374- AVRCP: new field `button_pressed` in `AVRCP_SUBEVENT_OPERATION` 375- AVRCP: `AVRCP_SUBEVENT_OPERATION` emitted for button release 376- AVRCP Controller: `avrcp_controller_start_press_and_hold_cmd` supports arbitrary device buttons 377- AVRCP Controller: reassemble fragmented AVCTP packets 378- AVDTP: `avdtp_register_media_config_validator` allows to validate media codec configuration 379- A2DP Source: `ENABLE_A2DP_SOURCE_EXPLICIT_CONFIG` disables auto config. requires call to `a2dp_source_set_config_{CODEC}` 380 381### Fixed 382- GAP: calculate IO Cap AuthReq Bondable Mode based on `gap_ssp_set_authentication_requirement` and `gap_set_bondable_mode` 383- GAP: only store link key for SSP if remote side has set bondable in io cap auth requirements 384- GAP: allow to disable link supervision timeout 385- GAP: fix `gap_connect` after `gap_connect_cancel` 386- GAP: re-configure advertisements after power cycle 387- HCI: handle start inquiry failure 388- L2CAP: fix create outgoing connection triggered from packet handler on hci disconnect event 389- L2CAP: return unknown mandatory option in config response 390- AVDTP: fix spelling `avdtp_set_preferred_sampling_frequency` 391- AVRCP Target: fix notification changed event 392- HFP: Emit audio connection released on SLC Release, e.g. on remote power off 393- HFP HF: fix audio connection setup if codec negotiation is supported 394- HFP HF: only emit single event for RING and AG Status updates 395- HFP AG: fix audio connection setup for in-band ringtone on incoming connection 396 397### Changed 398- Port Archive: moved ports that are not recommended for new designs to port/archive folder: 399 - MSP430: the ports used the older community GCC version without 20-bit support needed for code size > 64kB 400 - Broadcom/Cypress H5: uploading PatchRAM is only possible in H4 mode. It's better to also use H4 in general 401 - PIC32-Harmony: the port used Harmony v1 while Harmony v3 has been out since a while 402 - iOS: not supported 403- Run Loop Base: functionality used in most platform run loop implementations 404 - code from `btstack_run_loop_base.c` moved into `btstack_run_loop.c` to minimize changes to build systems 405 - `btstack_run_loop_base.c` is a placeholder and can be removed from build 406- HCI Dump: replace monolithic `hci_dump.c` (with many #ifdefs) into dispatcher with platform-specific implementations: 407 - `posix/hci_dump_posix_fs` - writes binary log file 408 - `posix/hci_dump_stdout` - log to console using printf with local system time 409 - `embedded/hci_dump_embedded_stdout` - log to console using printf 410 - `embedded/hci_dump_segger_stdout` - log to RTT console using `SEGGER_printf` 411 - `embedded/hci_dump_segger_binary` - writes binary log over RTT to host 412- HCI: config I2S for BCM Controllers if `ENABLE_SCO_OVER_PCM`, reduce bit clock to 256/512 kHz 413- btstack_uart_posix: supports SLIP frames and replaces `btstack_uart_block_posix` 414- hci_transport_h5: more performant H5 implementation that requires `btstack_uart_t` driver with SLIP support 415- POSIX Ports: use new `btstack_uart_posix` implementation 416- posix-h5/posix-h5-bcm: use even parity for UART 417- HCI Transport: extract convenience function declaration for h4, h5, em9304_spi, and usb into separate hci_transport_{type}.h 418- GAP: provide Device ID from EIR in GAP_EVENT_INQUIRY_RESULT 419- GAP: only store link key if it allows requested security level 420- GAP: abort SSP pairing if MITM protection required but not possible 421- SM: start pairing as Central for already encrypted connection on Slave Security Request 422- GATT Client: Use ATT_READ_REQUEST for first blob of Read Long Characteristic and Read Long Characteristic Descriptor 423- GATT Server: Allow ATT Read Callback to return custom ATT Error Code 424- Nordic SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 425 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 426- u-blox SPP Service Server: use `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` and `GATTSERVICE_SUBEVENT_SPP_SERVICE_CONNECTED` 427 events instead of callback, and `RFCOMM_DATA_PACKET` for received data 428- HID: Move `src/classic/hid.h` into `src` and prefix with `btstack_` to use it with BLE and avoid name clashes 429- HFP: provide acl_handle in events to identify connection 430- HSP AG: emit HSP_SUBEVENT_BUTTON_PRESSED instead of audio connection setup/release 431- Example: use `btstack_event.h` getters instead of direct array access, use enum to compare status codes 432 433 434## Release v1.3.2 435 436### Added 437- GAP: support for Classic Out-of-Band (OOB) pairing via `gap_ssp_remote_oob_data` with `ENABLE_CLASSIC_OOB_PAIRING` 438- GAP: read local OOB data on start and on call to `gap_ssp_generate_oob_data`, provided via `GAP_EVENT_LOCAL_OOB_DATA` 439- HID Host: add profile, update `hid_host_demo.c` example 440 441### Fixed 442- L2CAP: make handling of HCI disconnect more robust 443- AVDTP: emit stream release for active stream if signaling connection is closed first, e.g. caused by HCI disconnect 444- AVRCP: fix issue when Controller and Target send at the same time 445 446### Changed 447- A2DP, AVDTP: use `a2dp_source_set_config_{TYPE}` and `avdtp_config{TYPE}_store` to avoid large number of parameters 448 449 450## Release v1.3 451 452### Added 453- CC256x: with ENABLE_CC256X_ASSISTED_HFP, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 454- BCM: with ENABLE_BCM_PCM_WBS, HFP enables WBS codec on demand and configures PCM/I2S interface for 8kH/16kHz 455- SDP Client RFCOMM: add `sdp_client_query_rfcomm_channel_and_name_for_service_class_uuid` 456- HFP: `ENABLE_HFP_AT_MESSAGES` lets HFP emit `HFP_SUBEVENT_AT_MESSAGE_SENT` and `HFP_SUBEVENT_AT_MESSAGE_RECEIVED` 457- A2DP, AVDTP: provide capabilities and configuration events for A2DP codecs: SBC, MPEG Audio, MPEG AAC, ATRAC 458- A2DP + AVDTP Source: allow to send media packet with `avdtp_source_stream_send_media_packet` and `a2dp_source_stream_send_media_packet` 459- A2DP + AVDTP Source: add `avdtp_source_stream_send_media_payload_rtp` and `a2dp_source_stream_send_media_payload_rtp` 460- A2DP Source: emit `A2DP_SUBEVENT_SIGNALING_CAPABILITIES_COMPLETE` 461- A2DP Source: allow to configure endpoints by calling `a2dp_source_set_config_{TYPE}` during SEP discovery with SBC fallback 462 463### Fixed 464- HCI: keep `le connecting request` on connection complete active, fixes gap_auto_connection_stop() + gap_auto_connection_start() 465- L2CAP: fix packet size check for incoming classic basic channels (regression introduced in v1.2.1) 466- HFP AG/HSP AG: avoid connecting to remote service with same role 467- A2DP Source: support multiple Stream Endpoints with different Media Codec types 468- A2DP Source: emit codec configure event with reconfigure flag set on reconfigure 469- GATT Compiler: support multiple instances of the same service 470 471### Changed 472- GAP: provide Link Type parameter to incoming connection filter for `gap_register_classic_connection_filter` 473- HFP/GOEP Client/AVDTP/A2DP: return `SDP_SERVICE_NOT_FOUND` if no suitable SDP record is found 474- AVDTP Source: `avdtp_source_stream_send_media_payload` includes SBC Header and was deprecated 475- AVDTP/A2DP: use `avdtp_channel_mode_t` in `A2DP_SUBEVENT_SIGNALING_MEDIA_CODEC_SBC_CONFIGURATION` 476- A2DP: fix events and use `a2dp_cid`, `local_seid,` `remote_seid` field names in A2DP sub-events 477- GATT Client: Skip MTU exchange after MTU exchange on ATT Server 478- Ports: STM32-F103RB Nucleo + CC256x port removed 479- ESP32: enabled HFP Wide-Band Speech, disable classic secure connections in HSP/HFP demos 480 481 482## Release v1.2.1 483 484### Fixed 485- L2CAP: use connection handle for channel lookups 486- L2CAP: forward data only in open state 487 488### Changed 489- L2CAP: check packet size against local mtu for classic basic channels 490 491 492## Release v1.2 493 494### Fixed 495- L2CAP: trigger pairing for outgoing LE Data Channels if security level insufficient 496- SM: fix update of sc flag for re-encrypted connection in peripheral role 497- SM: send security request on re-connect if bonded and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is defined 498- ESP32: fix audio sink driver 499 500### Added 501- GAP: `gap_delete_bonding` removes device from LE Resolving List and from discards LE bonding information 502- GATT Client: delete bonding information if re-encryption fails and `ENABLE_LE_PROACTIVE_AUTHENTICATION` is not defined 503- GATT Client: gatt_client_set_required_security_level() allows to set required minimum security level for all GATT requests 504- SM: emit events for re-encryption started/complete when bonding information is available 505 506### Changed 507- AVRCP Controller: allow to send multiple absolute volume commands without waiting for response. 508- GAP: replaced `ENABLE_LE_CENTRAL_AUTO_ENCRYPION` with `ENABLE_LE_PROACTIVE_AUTHENTICATION` 509 510 511## Changes October 2020 512 513### Fixed 514- AVDTP Initiator: avoid use of remote seid for stream endpoint lookup, fixes issue with two connected devices 515- AVDTP Source: buffer for SBC media codec information got discarded, leading to invalid Set Configuration command in second connection 516- SM: only trigger Cross-Transport Key Derivation (CTKD) when bonding is enabled 517- SM: set LinkKey flag to request CTKD if enabled 518- SM: store CTKD key with Public Identity Address 519- SM: only allow CTKD to overwrite existing link key if derived key has same or higher authentication 520- SM: start SMP Timeout when sending Security Request 521- HFP HF: fix response to AG Codec Selection while waiting for OK of parallel command 522- HCI: fix reject of LE remote connection param request via HCI 523 524### Added 525- GAP: add `gap_get_link_key_for_bd_addr` 526- GAP: add `gap_bonded` to check if bonding information is available for active connection 527- SM: support h7 for CTKD 528 529### Changed 530- SM: Cross-Transport Key Derivation requires `ENABLE_CROSS_TRANSPORT_KEY_DERIVATION` now 531- SM: block connection if encryption fails for bonded devices as Central 532- SM: support pairing as Central after failed re-encryption 533 534 535## Release v1.1 536 537### Fixed 538- AVRCP/AVCTP: report AVRCP 1.6 and AVCTP 1.4 in SDP record 539 540### Added 541 542### Changed 543 544 545## Changes September 2020 546 547### Fixed 548- HFP: fix parsing of ranges e.g. in +CIND responses 549- AVDTP, AVRCP: fix bugs due to transaction id overrun 550- A2DP Source: fix issues with stream configuration by sink 551- hci_dump: fix tv_us calculation for non-posix / embedded systems with binary output 552 553### Added 554- `btstack_ring_buffer`: add `btstack_ring_buffer_reset` to reset it to initial state/empty 555- GAP: Support for address resolution of resolvable private addresses by Controller with `ENABLE_LE_PRIVACY_ADDRESS_RESOLUTION` 556 557### Changed 558- AVDTP, AVRCP, HSP: schedule SDP query, avoids avoids 'command disallowed' if SDP client is busy 559- HSP, HFP: allow to configure usable SCO packet types 560- cc256x: update CC256xC init script to v1.4 561- A2DP Source: use Get All Capabilities if supported by remote get Delay Reporting capability 562 563## Changes August 2020 564 565### Fixed 566- ESP32: fix authentication for incoming Secure Connections 567- AVDTP: Fix forwarding of Delay reports 568- STM32-F4Discovery: fix pan_lwip_http_server by increasing HCI_ACL_PAYLOAD_SIZE 569- tool/create_packet_log: basic support for 16-bit Unicode log files from Windows 570 571### Added 572- `btstack_run_loop_base`: added `btstack_run_loop_base_dump_timer` 573- GAP: request role change for classic connection via `gap_request_role` 574- GAP: LE Whitelist API with `gap_le_whitelist_x` with x = add, remove, clear and new `gap_connect_with_whitelist` 575- SDP Client: add sdp_client_register_query_callback() allows to register query request instead of polling sdp_client_ready() 576- BNEP lwIP: add `bnep_lwip_connect` to establish BNEP connection and manage lwIP network interface 577- New `btstack_linked_queue` utility, a linked list-based queue with first-in-first-out semantics and constant time enqueue/dequeue operations 578- btstack_tlv_posix: add `btstack_tlv_posix_deinit` 579- New `btpclient` for use with [auto-pts project](https://github.com/intel/auto-pts) 580 581### Changed 582- GAP: treat AES-CCM encrypted connection as mutually authenticated (BIAS) 583- GAP: 'gap_auto_connect_x' API deprecated. Please directly manage LE Whitelist with `gap_le_whitelist_*` functions and call `gap_connect_with_whitelist` instead 584- example/hid_host_demo: try to become master for incoming connections 585- btstack_run_loop: use btstack_assert instead of local while(true) 586- att_db_util: allow to reset att_db via `att_db_util_init` 587 588## Changes July 2020 589 590### Fixed 591- AVDTP: fix invalid response for Get Capabilities request if Delay Reporting was supported 592- AVDTP: handle concurrent signaling establishment with reject and retry 593 594### Added 595- example/hid_host_demo: support reconnect from HID device 596- Crypto: support software AES128 for AES-CCM operations 597- AVRCP: introduced AVRCP_FEATURE_MASK_* as alternative to avrcp_controller_supported_feature_t and avrcp_target_supported_feature_t enums 598- btstack_audio: add set_volume() to sink and set_gain() to source interfaces, minimal volume control for portaudio playback 599- AVDTP: renamed definition of supported features from AVDTP_SOURCE_SF_ and AVDTP_SINK_SF_ to AVDTP_SOURCE_FEATURE_MASK_ and AVDTP_SINK_FEATURE_MASK_ respectively 600- GAP: Provide gap_get_role to query master/slave role for HCI connection handle 601- GAP: Provide gap_pin_code_response_binary to use binary data as PIN, e.g. for pairing with Nintendo Wii Remote 602 603### Changed 604- GAP: set minimum required encryption key size for Classic connections back from 16 to 7, matching the Core spec 605 606 607## Changes June 2020 608 609### Fixed 610- HFP: Fix parsing of empty fields, e.g. phone number in +CLCC and other AT commands 611- SM: Fix validation of confirm value for secure connection Passkey entry 612- AVRCP: handle concurrent signaling establishment with reject and retry 613 614### Added 615- GAP: Detect Secure Connection -> Legacy Connection Downgrade Attack by remote features and actual encryption type (BIAS) 616- GAP: Mutual authentication: request authentication after Classic connection got encrypted (BIAS) 617- Windows port for Dialog DA14585 connected via serial port 618 619## Changes 620- CVSD PLC: treat zero frames as good and allow to mark data as bad, e.g. if reported by Controller as erroneous 621 622## Changes May 2020 623 624### Fixed 625- hfp_hf, hsp_hs: use eSCO params in accept sco connection only for incoming eSCO connections 626- pbap_client: fix PBAP UUID len on connect message 627- SM: fix secure connection pairing as peripheral when local user confirmation happens after remote one 628- A2DP Source: only connect to remote sink stream endpoints 629- btstack_hal_flash_memory: fix write of 0xff bytes to simulated flash 630- hsp_hs: fix disconnect if audio not connected 631- hsp_ag: fix accept incoming connection 632 633### Added 634- example/le_mitm: MITM implementation that forwards ATT PDUs and allows for pairing 635- GAP: gap_set_security_level sets required security level for incoming and outgoing connections 636- cc256x: allow to specify power vector for each modulation type 637- FreeRTOS: btstack_run_loop_freertos_trigger_exit allows to request run loop exit 638- SM: support LE Secure Connections Only mode with sm_set_secure_connections_only_mode 639- GAP: enable BR/EDR Secure Connections if supported, add gap_secure_connections_enable 640 641### Changed 642- L2CAP ERTM: send extended features request only once per HCI connection 643 644 645## Changes April 2020 646 647### Fixed 648- hog_mouse_demo/hog_keyboard_demo: handle set protocol mode = boot protocol mode 649- HCI: only update BD_ADDR placeholder in shortened and complete name in EIR data, limit device name to 240/248 bytes 650 651### Added 652- GAP: gap_set_allow_role_switch allows to prevent role switch in outgoing classic ACL connections 653- example: hog_boot_host_demo implements an HID-over-GATT Boot Host that supports keyboard and mouse 654- HCI: add ENABLE_LE_LIMIT_ACL_FRAGMENT_BY_MAX_OCTETS that forces fragmentation of ACL-LE packets to fit into over-the-air packet 655 656### Changed 657- Broadcom/Cypress: wait 300 ms after PatchRAM update in hci.c to assert Controller is ready 658- esp32: provide esp-idf/component/btstack/btstack_port_esp32.c and only minimal app_main in template/main/main.c 659- att_db: skip att_read_callback for ATT Read Blob Request if offset == value_len 660 661 662## Changes March 2020 663 664### Fixed 665- GAP: fixed gap_set_scan_parameters() if issued right before gap_start_scan() 666- HCI: only send HCI Read Local Encryption Key Size if supported by Controller 667 668### Added 669- GATT Client: allow to register for any notification/indication and/or any connection 670- HCI: added hci_read_inquiry_scan_activity and hci_write_inquiry_scan_activity commands 671- chipset: assert hci packet buffers are suitable for firmware upload or patches (atwilc3000,bcm,cc256x,intel) 672- btstack_util: added btstack_replace_bd_addr_placeholder 673 674### Changed 675- AVRCP Target: volume in avrcp_target_volume_changed is reported as current value in interim response to register for volume change notifications 676- SDP Client: query attributes 0x0000..0xffff instead of 0x0001..0xffff to match other stacks / improve compatibility with bad sdp server implementations 677 678 679## Changes Februar 2020 680 681### Fixed 682- AVRCP Target: fix reporting of PLAYBACK_STATUS_CHANGED 683- HCI: handle reconnect request for Classic and LE connections triggered by packet handler for Disconnection Complete Event 684 685### Changed 686- hid_host_mode: allow sniff mode 687 688### Added 689- port/qt-usb and port/qt-h4: integrate BTstack Qt run loop for Unix- and Win32-based Qt application connected to Bluetooth module via H4 over serial port or USB 690 691 692## Changes January 2020 693 694### Fixed 695- L2CAP ERTM: avoid read-after-free on decline of incoming connection 696- GATT Client: set uuid16 to zero when deserializing uuid128 services, characteristics, and descriptors 697- att_db_util: fix realloc of att db buffer for large attributes 698- btstack_tlv_posix: only keep last value in memory, fix delete operation 699- l2cap_signaling: use packet boundary flags 0x00 for LE signaling packets (ignoring hci_non_flushable_packet_boundary_flag_supported()) 700 701### Added 702- att_db_util: provide GATT Database Hash via att_db_util_hash_calc 703- GATT Compiler: provide GATT Database Hash via GATT_DATABASE_HASH Characteristic 704- ATT Server: validate request pdu length 705 706### Changed 707- Crypto: update AES-CMAC implementation to access all message bytes sequentially 708 709 710## Changes December 2019 711 712### Fixed 713- example/pan_lwip_http_server: use Network Access Point, CoD 714- sm: emit pairing complete in master role when no keys are distributed / bonding disabled 715 716### Added 717 718### Changed 719- Updated CC256x initscript: CC256xC v1.3 720- ESP32: add CMake project files 721 722 723## Changes November 2019 724 725### Fixed 726- AVDTP Source: return correct `avdtp_cid` and `local_seid` in `AVDTP_SUBEVENT_STREAMING_CAN_SEND_MEDIA_PACKET_NOW` 727- L2CAP: send LE Data Channel SDUs round robin with other data 728- L2CAP ERTM: send ERTM I-frames round robin with other data 729 730### Added 731- ATT Server: return error if request to send now for Notification or Indication already registered 732- Linked List: return if item was added for `btstack_linked_list_add[_tail]` 733- btstack_run_loop_remove: return bool true if timer/data source was removed 734- segger-rtt: allow to configure with `SEGGER_RTT_PACKETLOG_*` directives, update to v6.54 735- GAP: support setting Link Supervision Timetout for outgoing Classic connections using `gap_set_link_supervision_timeout` 736- lwip: add download test files to http server demo 737 738### Changed 739- Linked List: return bool true if item was removed 740 741 742## Changes October 2019 743 744### Fixed 745 746### Added 747- `btstack_bool.h`: provide boolean type 'bool' via `<stdbool.h>` or as backport 748- provide `btstack_assert(condition)` 749- H4 Transport: avoid calling `hci_transport_h4_trigger_next_read` when transport is closed 750 751### Changed 752- libusb and posix ports: store bonding information in TLV 753 754 755## Changes September 2019 756 757### Fixed 758- L2CAP ERTM: assert that packet can be stored in fragment buffers in ertm 759- L2CAP ERTM: reject incoming connection if ERTM is configured as mandatory but not supported by remote 760- GATT Client: allow Write Without Response independent of other requests 761 762### Added 763- GAP: allow to reject GAP classic connection via gap_register_classic_connection_filter 764- GAP: support reading RSSI for Classic+LE using gap_read_rssi. Emits `GAP_EVENT_RSSI_MEASUREMENT` 765 766### Changed 767- Bluetooth and BTstack Error Codes and Events: collect status codes in bluetooth.h and events in btstack_defines.h 768- bluetooth.h: extract internal defintitions to respective protocol layers 769- Updated CC256x initscripts (CC256xB v1.8, CC256xC v1.2, CC256xC v1.2) 770 771 772## Changes August 2019 773 774### Fixed 775- POSIX, WICED, Windows, FreeRTOS run loops: handle time_ms overrun after 49 days 776- RFCOMM: accept incoming L2CAP connection in Basic mode if ERTM is enabled but not requested for this connection 777- RFCOMM: limit RFCOMM MTU by local L2CAP MTU for outgoing connections (only revelvant for ERTM) 778- L2CAP ERTM: stop timers on disconnect 779- L2CAP ERTM: fix sending of segmented SDUs 780- L2CAP ERTM: handle unsupported Information Response 781- SM: generate local nonce for confirm value in JW+NC+PK in Secure Connections Responder role 782 783### Added 784- `btstack_run_loop_base`: portable implementation of timer and data source management as base for platform specific implementations 785 786## Changed 787- FreeRTOS: use xQueueCreateStatic (static variant of xQueueCreate) if available for static memory-only setups 788- L2CAP ERTM: handle invalid Information Response (assume no extended features supported) 789- POSIX: use monotonic clock as timebase if available 790- HCI Transport H4/H5/EM9304 SPI: ignore block read/sent from UART driver when closed 791- HCI: Read Encryption Key Size after encryption was enabled 792- Errata 11838: 793 - GAP: gap_set_required_encryption_key_size allows to set the required key size, default = 16 (max) 794 - GAP: validate encryption key size to emit GAP Security Levels 795 796## Changes July 2019 797 798### Fixed 799- SM: Fixed regression introduced in f3582630 800- L2CAP: avoid reading l2cap signaling command len out of bounds 801- HCI Transport H4/H5/EM9304 SPI: fix payload size checks (also for 8/16-bit platforms) 802 803### Changed 804- SM: Start encryption upon receiving slave securiy request if bonded 805- hci: use 2 as HCI_INCOMING_PRE_BUFFER_SIZE in LE-only configuration for GATT Client 806 807--- 808 809## Changes June 2019 810 811### Changed 812- FreeRTOS: use freertos/.. prefix to include FreeRTOS headers if HAVE_FREERTOS_INCLUDE_PREFIX is defined 813- BNEP: add Connection Handle to BNEP_EVENT_CHANNEL_OPENED 814- Examples: renamed le_counter to gatt_counter and le_streamer to le_streamer_server to indicate suppport for GATT over BR/EDR 815 816### Fixed 817- BNEP: Bluetooth address is stored in little-endian format for all BNEP_EVENT_* 818- libusb: avoid use-after-free for SCO packets on disconnect 819 820### Added 821- example: pan_lwip_http_server using lwIP as network stack to implement PAN NAP service 822- platform/lwip/bnep_lwip.c: BNEP lwIP adapter that forwards packets between BNEP service and lwIP 823- ENABLE_GATT_OVER_CLASSIC enables support for GATT over BR/EDR in att_server 824 825--- 826 827## Changes May 2019 828 829### Changed 830- ESP32: Configure SCO over HCI after power up 831- btstack_tlv_flash_bank: support targets where a value cannot be overwritten with zero. When ENABLE_TLV_FLASH_EXPLICIT_DELETE_FIELD 832 is defined, an explicit delete field is used to indicate an invalid entry. 833 834### Fixed 835- SM: Avoid potential use-after-free on immediate disconnect (lookup connection via con handle instead of storing pointer) 836 837### Added 838- gatt_client: emit query complete event for signed write operation 839- hci_transport_h4: add workaround for flow control bug in CYW2070x, enable with ENABLE_CYPRESS_BAUDRATE_CHANGE_FLOWCONTROL_BUG_WORKAROUND 840 841--- 842 843## Changes April 2019 844 845### Changed 846- ESP32: use micro-ecc from 3rd-party as esp-idf removed it in their 3.3 release 847 848### Fixed 849- hci: pad LE Scan response with zeroes 850- SM: store local CSRK 851- ATT DB: call write callback for validated signed writes 852- ATT Server: abort signed write validation on incoming new request 853- Bluetooth SIG web scraping tools updated 854- libusb: compiles for FreeBSD 855 856### Added 857 858--- 859 860## Changes March 2019 861 862### Changed 863- use Makefile for stm32-f4discovery-cc256x port 864- le_device_db: add secure_connection argument to le_device_db_encryption_set and le_device_db_encryption_get 865 866### Fixed 867- SM: Use provided authentication requirements in slave security request 868 869### Added 870- port/stm32-f4discovery-cc256x: add support for built-in MEMS microphone 871- SM: Track if connection encryption is based on LE Secure Connection pairing 872- ATT DB: Validate if connection encrypted is based on SC if requested 873- att_db_util: support ATT_SECURITY_AUTHENTICATED_SC permission flag 874- GATT Compiler: support READ_AUTHENTICATED and WRITE_AUTHENTICATED permsission flags 875- ESP32: erase nvs flash is newer nvs version found 876- libusb: add support for nRF52840-PCA10056 running Zephyr hci_usb example 877- port/stm32-l073rz-nucleo-em9304 for Nucleo L073RZ with EM9304 DVK, replaces port/stm32-l053r8-nucleo-em9304 878 879## Changes February 2019 880 881### Changed 882- example/a2dp_sink_demo: use linear resampling to fix sample rate drift 883- btstack_audio: split interface into sink and source 884 885### Fixed 886- Crypto: fix lockup when stack is shutdown while waiting for result of HCI Command, e.g. LE Read Local P256 Public Key 887- SM: Avoid SM_EVENT_PAIRING_COMPLETE with ERROR_CODE_REMOTE_USER_TERMINATED_CONNECTION after successful pairing in responder role 888 889### Added 890- example/a2dp_sink_demo: add target role, support volume control on both devices 891- example/audio_duplex: playback audio audio source on audio sink (test audio path) 892- btstack_audio_embedded: implement audio source path 893 894--- 895 896## Changes January 2019 897 898### Changed 899- L2CAP: provide channel mode (basic/ertm) and fcs option in L2CAP_EVENT_CHANNEL_OPENED 900- RFCOMM: support L2CAP ERTM. Callbacks passed to rfcomm_enable_l2cap_ertm() are used to manage ERTM buffers 901 902### Added 903- L2CAP: emit L2CAP_EVENT_ERTM_BUFFER_RELEASED if ERTM buffer not needed/used anymore 904- L2CAP: add fcs_option to ERTM config l2cap_ertm_config_t 905- HCI: validate advertisement data length field when generating GAP_EVENT_ADVERTISING_REPORT 906- ad_parser: validate data element length fields in ad_iterator_has_more 907- Raspberry Pi 3 A+/B+ port in port/raspi, starts without power cycle 908 909### Fixed 910- HCI: release outgoing buffer on disconnect if waiting to send another ACL fragment 911- POSIX: use correct baudrate enums for baud rates higher than 921600 (Linux) 912- Crypto: directly process queued crypto operation on HCI result 913 914--- 915 916## Changes December 2018 917 918### Added 919- SM: generate and store ER / IR keys in TLV, unless manually set by application 920- hci_dump: support PacketLogger or BlueZ format output via SEGGER RTT Channel 1 Up 921 922### Fixed 923- SM: fix internal buffer overrun during random address generation 924 925## Changes November 2018 926 927### Added 928- GAP: gap_le_connection_interval provides connection interval for conn handle 929- Nordic SPP Service Server: GATT service that emulates a serial port over BLE based on Nordic Semiconductor documentation. 930- uBlox SPP Service Server: GATT service that emulates a serial port over BLE based on uBlox documentation. 931- SM: ENABLE_LE_CENTRAL_AUTO_ENCRYPTION triggers automatic encryption on connect to bonded devices 932- SM: generate and store ER / IR keys in TLV, unless manually set by application 933 934### Fixed 935- SM: prevent random address updates if gap_random_address_set was used 936- SM: fix internal buffer overrun that can cause storing of bonding information to fail 937- SM: ignore Slave Security Request after sending own Pairing Request 938- L2CAP: fix use after free on disconnect if ERTM is enabled 939- HFP: Handle multiple commands/responses in single RFCOMM packet 940- Memory Pools: clear all buffers before use 941 942--- 943 944## Changes October 2018 945 946### Added 947- SDP Server: queue incoming connections when already connected instead of rejecting them 948- GAP: Support enter/exit sniff mode via gap_sniff_mode_enter/exit. gap_set_default_link_policy_settings is needed to enable sniff mode in general. 949- HIDS Device: GATT service that exposes HID reports intended for HID Devices, like keyboard and mouse. 950 951### Fixed 952- HCI: fix bug in gap_inquiry_stop that triggered additional GAP_EVENT_INQUIRY_COMPLETE instead of stopping the inquiry 953- L2CAP: fix issue with outgoing connection before read remote supported complete when other channels exist 954- L2CAP ERTM: allow SDU of szie MPS in first packet that contains L2CAP SDU Length 955- L2CAP ERTM: fix memory corruption triggered if local_mtu > mps 956- L2CAP ERTM: fix outgoing fragment management 957- HFP: decline incoming RFCOMM connection after outgoing connection was started 958- AVRCP: fix crash on disconnect of connection established by remote 959 960--- 961 962## Changes September 2018 963 964### Fixed 965- HCI: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 966- L2CAP: Error creating outgoing connection (e.g. Connection Limit Exceeded) now handled 967- L2CAP: Evaluate 'can send now' on HCI Disconnect as ACL buffers in Bluetooth Controller have been used for the closed connection are freed implicitly 968- L2CAP: Check can send now before sending extended information requeste needed for ERTM mode 969- L2CAP: Use valid signaling identifier for L2CAP Connection Parameter Update Request 970- RFCOMM: Trigger l2cap request to send on rfcomm credits when client is waiting to sendtrigger l2cap request to send on rfcomm credits when client is waiting to send 971- RFCOMM: Avoid use-after-free on channel finalize 972- GATT Client: stop timer on disconnect - fixes use after free / crash 973 974### Added 975- A2DP Source: Support stream reconfiguration (a2dp_source_reconfigure_stream_sampling_frequency) 976- 3rd-party: yxml is used for PBAP vCard list parsing 977- cc256xC: new v1.1 init scripts 978 979--- 980 981## Changes August 2018 982 983### Added 984- PBAP: added pbap_get_phonebook_size() to get phonebook entry count 985 986### Fixed 987- GATT Server: Allow enable Notifications/Indication with Write Command. Fixes issue with some Android devices. 988- SM: fix pairing for Secure Connections with Bonding if remote sends additional keys 989- SM: drop LTK flag from Pairing Response for Secure Connections 990- L2CAP: fix emitted L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_REQUEST 991 992## Changes June 2018 993 994### Added 995- btstack_audio.h: application level API for audio playback and recording 996- embedded/hal_audio.h: low-level API for audio playback and recording 997- HID Device: hid_device_connect(..) function 998- ESP32: implement hal_audio 999- DA14585: support for Dialog Semiconductor DA14585 LE-only controller 1000- Raspberry Pi 3 + Raspberry Pi Zero W port in port/raspi 1001 1002### Changed 1003- Errata 10734: 1004 - SM: Generate new EC Public Keypair after each pairing 1005 - SM: Abort failure with DHKEY_CHECK_FAILED if received public key is invalid (instead of unspecified error) 1006- btstack.h: only include classic headers if ENABLE_CLASSIC is defined 1007- windows: ignore virtual Bluetooth adapter provided by VMware 1008- Replaced HCI_PACKET_BUFFER_SIZE with HCI_INCOMING_PACKET_BUFFER_SIZE and HCI_OUTGOING_PACKET_BUFFER_SIZE 1009 1010--- 1011 1012## Changes June 2018 1013 1014### Fixed 1015- HFP: Fix Wide Band Speech bit in SDP record for both HF/AG. Missing bit prevents macOS from using mSBC 1016- ATT Server: send ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE with status ATT_HANDLE_VALUE_INDICATION_DISCONNECT on disconnect 1017- AVRCP Controller: fix parsing of now playing info 1018 1019### Changed 1020- ATT Server: ATT_HANDLE_VALUE_INDICATION_DISCONNECT is delivered to service handler if registered 1021 1022### Added 1023- ATT Server: packet handler field added to att_service_handler_t to receive: connect/disconnect, atu exchange, indication complete 1024 1025--- 1026 1027## Changes May 2018 1028 1029### Added 1030- GAP: re-encrypt outgoing connection if bonded 1031- ATT Server: wait until re-encryption is complete 1032- GATT Client: wait until re-encryption is complete 1033- ATT Server: added att_server_request_to_send_notification and att_server_request_to_send_indication 1034- GATT Client: if ENABLE_GATT_CLIENT_PAIRING, GATT Client starts pairing and retry operation on security error 1035 1036### Changed 1037- ATT Server: att_server_register_can_send_now_callback is deprecated, use att_server_request_to_send_notification/indication instead 1038 1039### Fixed 1040- SM: Fix LE Secure Connection pairing in Central role 1041- le_device_db_tlv: fix seq nr management 1042- SM: improve le_device_db lookup and storing of IRK 1043- GATT Server: fix lookup for Client Characteristic Configuration in services with multiple Characteristics 1044- RFCOMM: emit channel closed on HCI/L2CAP disconnect after sending DISC while expecting UA 1045 1046--- 1047 1048## Changes April 2018 1049 1050### Added 1051- Crypto: btstack_crypo.h provides cryptographic functions for random data generation, AES128, EEC, CBC-MAC (Mesh) 1052- SM: support pairing using Out-of-Band (OOB) data with LE Secure Connections 1053- Embedded: support btstack_stdin via SEGGER RTT 1054 1055### Changed 1056- att_db_util: added security requirement arguments to characteristic creators 1057- SM: use btstack_crypto for cryptographpic functions 1058- GAP: security level for Classic protocols (asides SDP) raised to 2 (encryption) 1059 1060### Fixed 1061- HFP: fix answer call command 1062- HCI: fix buffer overrun in gap_inquiry_explode 1063- SDP: free service record item on sdp_unregister_service 1064 1065## Changes March 2018 1066 1067### Added 1068- GAP: allow to limit number of connections in LE Peripheral role with gap_set_max_number_peripheral_connections 1069- ATT Server: support for delayed ATT read response, see example/att_delayed_read_response.c 1070- ATT Server: allow to specify security requirements seperately for read/writes. .h files need to be regenerated 1071 1072### Fixed 1073- RFCOMM: fix infinite loop on L2CAP connection error (regression from 4c3eeed1) 1074- HSP HS: accept incomming SCO connection 1075- SM: fix iteration over LE Device DB entries for bonding and address resolving 1076- SM: store pairing information only if both devices have requested bonding 1077 1078--- 1079 1080## Changes February 2018 1081 1082### Added 1083- GATT Client: gatt_client_request_can_write_without_response_event() causes GATT_EVENT_CAN_WRITE_WITHOUT_RESPONSE 1084- SM: new event SM_EVENT_PAIRING_COMPLETE 1085- GAP: support iteration over stored Classic link keys: gap_link_key_iterator_init, gap_link_key_iterator_get_next, gap_link_key_iterator_done 1086- GAP: add gap_delete_all_link_keys 1087 1088### Changed 1089- GATT Client: round robin for multiple connections 1090- ATT Dispatch: round robin for ATT Server & GATT Client 1091- L2CAP: round robin for all L2CAP channels (fixed and dynamic) 1092- btstack_link_key_db: addition functions for link key iteration 1093- GAP: LE scanning enabled not reset on HCI Reset -> can be enabled before HCI Power Up 1094- CSR: set all keys in psram instead of default 1095 1096### Fixed 1097- tc3556x: fix startup after baud rate change 1098 1099--- 1100 1101## Changes January 2018 1102 1103### Added 1104- Port for Windows with Zephyr HCI Firmware connected via serial port 1105- em9304: upload patch containers during HCI bootup 1106- Makefile for STM32-F4Discovery port 1107- support for console out via SEGGER RTT 1108- LE Data Channels example in BTstack and [iOS example on GitHub](https://github.com/bluekitchen/CBL2CAPChannel-Demo) 1109- LE Streamer Client can send as fast as possbile as well 1110- L2CAP: option to limit ATT MTU via l2cap_set_max_le_mtu 1111 1112### Changed 1113- HCI: allow to set hci_set_master_slave_policy (0: try to become master, 1: accept slave) 1114- GAP: gap_set_connection_parameters includes scan interval and window params 1115- GATT Client: GATT_EVENT_MTU indicates max MTU 1116- ATT DB Util: attribute handle is returned for new Services and Characteristics 1117 1118### Fixed 1119- Windows: retry serial port operations if not all bytes have been read/written 1120- HFP: avoid buffer overflows setting up messages 1121- SBC Decoder: improved error handling for invalid SBC audio data 1122- GAP: fix Connection Parameter Response in Central role 1123- ATT DB Util: update pointer to database in case of realloc 1124- GATT Client: set UUID16 field if 16-bit UUID is stored as UUID128 1125- GAP: release HCI Connnection after gap_le_conne 1126- ATT: Exchanged MTU is propagate to ATT Server and GATT Client 1127 1128--- 1129 1130## Changes December 2017 1131 1132### Added 1133- Introduced btstack_network.h network interface abstraction 1134- btstack_network_posix implementation using Linux tun/tap interface 1135- WICED: support for btstack_stdin (HAVE_STDIN) 1136- GATT Server: Writes to GATT Client Characteristic Configuration are stored in TLV and restored on reconnect. The db.h file generated from db.gatt needs to be re-created. 1137- TLV: global TLV instance available via btstack_tlv_get_instance() (src/btstack_tlv.h) 1138- TLV: POSIX implementation that appends to a file on disk (platform/posix/btstack_tlv_posix.c 1139- LE Device DB TLV: overwrite oldest entry if no free entries available 1140- SM: allow to set fixed passkey in display role using sm_use_fixed_passkey_in_display_role 1141- Example/hid_host_demo with HID parser and support for basic US keyboard layout 1142- EM9304: custom HCI Transport implementation for EM9304 on top of btstack_em9304_spi.h platform abstraction only requires hal_em9304_spi.h to be implemented for new ports 1143- Port for Apollo2 MCU with EM9304 (ports/apollo2-em9304) 1144 1145### Changed 1146- panu_demo: uses btstack_network.h now 1147- WICED: configure printf to replace Linefeed with CRLF 1148- SBC: split btstack_sbc_bludroid.c into seperate encoder and decoder implementations 1149 1150### Fixed 1151- RFCOMM: support connection requests during connection failure 1152- L2CAP: support connection requests during connection failure 1153- L2CAP: fix default remote MTU as 672 instead of 48 (Minimal MTU) 1154- HCI: avoid double free during halting 1155- SM: fixed reconnect using legacy pairing in slave role 1156 1157 1158