//===- README.txt - Notes for improving PowerPC-specific code gen ---------===//

TODO:
* lmw/stmw pass a la arm load store optimizer for prolog/epilog

===-------------------------------------------------------------------------===

This code:

unsigned add32carry(unsigned sum, unsigned x) {
 unsigned z = sum + x;
 if (sum + x < x)
     z++;
 return z;
}

Should compile to something like:

	addc r3,r3,r4
	addze r3,r3

instead we get:

	add r3, r4, r3
	cmplw cr7, r3, r4
	mfcr r4 ; 1
	rlwinm r4, r4, 29, 31, 31
	add r3, r3, r4

Ick.

===-------------------------------------------------------------------------===

We compile the hottest inner loop of viterbi to:

        li r6, 0
        b LBB1_84       ;bb432.i
LBB1_83:        ;bb420.i
        lbzx r8, r5, r7
        addi r6, r7, 1
        stbx r8, r4, r7
LBB1_84:        ;bb432.i
        mr r7, r6
        cmplwi cr0, r7, 143
        bne cr0, LBB1_83        ;bb420.i

The CBE manages to produce:

	li r0, 143
	mtctr r0
loop:
	lbzx r2, r2, r11
	stbx r0, r2, r9
	addi r2, r2, 1
	bdz later
	b loop

This could be much better (bdnz instead of bdz) but it still beats us.  If we
produced this with bdnz, the loop would be a single dispatch group.

===-------------------------------------------------------------------------===

Lump the constant pool for each function into ONE pic object, and reference
pieces of it as offsets from the start.  For functions like this (contrived
to have lots of constants obviously):

double X(double Y) { return (Y*1.23 + 4.512)*2.34 + 14.38; }

We generate:

_X:
        lis r2, ha16(.CPI_X_0)
        lfd f0, lo16(.CPI_X_0)(r2)
        lis r2, ha16(.CPI_X_1)
        lfd f2, lo16(.CPI_X_1)(r2)
        fmadd f0, f1, f0, f2
        lis r2, ha16(.CPI_X_2)
        lfd f1, lo16(.CPI_X_2)(r2)
        lis r2, ha16(.CPI_X_3)
        lfd f2, lo16(.CPI_X_3)(r2)
        fmadd f1, f0, f1, f2
        blr

It would be better to materialize .CPI_X into a register, then use immediates
off of the register to avoid the lis's.  This is even more important in PIC
mode.

Note that this (and the static variable version) is discussed here for GCC:
http://gcc.gnu.org/ml/gcc-patches/2006-02/msg00133.html

Here's another example (the sgn function):
double testf(double a) {
       return a == 0.0 ? 0.0 : (a > 0.0 ? 1.0 : -1.0);
}

it produces a BB like this:
LBB1_1: ; cond_true
        lis r2, ha16(LCPI1_0)
        lfs f0, lo16(LCPI1_0)(r2)
        lis r2, ha16(LCPI1_1)
        lis r3, ha16(LCPI1_2)
        lfs f2, lo16(LCPI1_2)(r3)
        lfs f3, lo16(LCPI1_1)(r2)
        fsub f0, f0, f1
        fsel f1, f0, f2, f3
        blr

===-------------------------------------------------------------------------===

PIC Code Gen IPO optimization:

Squish small scalar globals together into a single global struct, allowing the
address of the struct to be CSE'd, avoiding PIC accesses (also reduces the size
of the GOT on targets with one).

Note that this is discussed here for GCC:
http://gcc.gnu.org/ml/gcc-patches/2006-02/msg00133.html

===-------------------------------------------------------------------------===

Darwin Stub removal:

We still generate calls to foo$stub, and stubs, on Darwin.  This is not
necessary when building with the Leopard (10.5) or later linker, as stubs are
generated by ld when necessary.  Parameterizing this based on the deployment
target (-mmacosx-version-min) is probably enough.  x86-32 does this right, see
its logic.

Note: Since Darwin support has been removed, this item is no longer valid for
Darwin specfically.

===-------------------------------------------------------------------------===

Darwin Stub LICM optimization:

Loops like this:

  for (...)  bar();

Have to go through an indirect stub if bar is external or linkonce.  It would
be better to compile it as:

     fp = &bar;
     for (...)  fp();

which only computes the address of bar once (instead of each time through the
stub).  This is Darwin specific and would have to be done in the code generator.
Probably not a win on x86.

===-------------------------------------------------------------------------===

Simple IPO for argument passing, change:
  void foo(int X, double Y, int Z) -> void foo(int X, int Z, double Y)

the Darwin ABI specifies that any integer arguments in the first 32 bytes worth
of arguments get assigned to r3 through r10. That is, if you have a function
foo(int, double, int) you get r3, f1, r6, since the 64 bit double ate up the
argument bytes for r4 and r5. The trick then would be to shuffle the argument
order for functions we can internalize so that the maximum number of
integers/pointers get passed in regs before you see any of the fp arguments.

Instead of implementing this, it would actually probably be easier to just
implement a PPC fastcc, where we could do whatever we wanted to the CC,
including having this work sanely.

===-------------------------------------------------------------------------===

Fix Darwin FP-In-Integer Registers ABI

Darwin passes doubles in structures in integer registers, which is very very
bad.  Add something like a BITCAST to LLVM, then do an i-p transformation that
percolates these things out of functions.

Check out how horrible this is:
http://gcc.gnu.org/ml/gcc/2005-10/msg01036.html

This is an extension of "interprocedural CC unmunging" that can't be done with
just fastcc.

===-------------------------------------------------------------------------===

Fold add and sub with constant into non-extern, non-weak addresses so this:

static int a;
void bar(int b) { a = b; }
void foo(unsigned char *c) {
  *c = a;
}

So that

_foo:
        lis r2, ha16(_a)
        la r2, lo16(_a)(r2)
        lbz r2, 3(r2)
        stb r2, 0(r3)
        blr

Becomes

_foo:
        lis r2, ha16(_a+3)
        lbz r2, lo16(_a+3)(r2)
        stb r2, 0(r3)
        blr

===-------------------------------------------------------------------------===

We should compile these two functions to the same thing:

#include <stdlib.h>
void f(int a, int b, int *P) {
  *P = (a-b)>=0?(a-b):(b-a);
}
void g(int a, int b, int *P) {
  *P = abs(a-b);
}

Further, they should compile to something better than:

_g:
        subf r2, r4, r3
        subfic r3, r2, 0
        cmpwi cr0, r2, -1
        bgt cr0, LBB2_2 ; entry
LBB2_1: ; entry
        mr r2, r3
LBB2_2: ; entry
        stw r2, 0(r5)
        blr

GCC produces:

_g:
        subf r4,r4,r3
        srawi r2,r4,31
        xor r0,r2,r4
        subf r0,r2,r0
        stw r0,0(r5)
        blr

... which is much nicer.

This theoretically may help improve twolf slightly (used in dimbox.c:142?).

===-------------------------------------------------------------------------===

PR5945: This:
define i32 @clamp0g(i32 %a) {
entry:
        %cmp = icmp slt i32 %a, 0
        %sel = select i1 %cmp, i32 0, i32 %a
        ret i32 %sel
}

Is compile to this with the PowerPC (32-bit) backend:

_clamp0g:
        cmpwi cr0, r3, 0
        li r2, 0
        blt cr0, LBB1_2
; %bb.1:                                                    ; %entry
        mr r2, r3
LBB1_2:                                                     ; %entry
        mr r3, r2
        blr

This could be reduced to the much simpler:

_clamp0g:
        srawi r2, r3, 31
        andc r3, r3, r2
        blr

===-------------------------------------------------------------------------===

int foo(int N, int ***W, int **TK, int X) {
  int t, i;

  for (t = 0; t < N; ++t)
    for (i = 0; i < 4; ++i)
      W[t / X][i][t % X] = TK[i][t];

  return 5;
}

We generate relatively atrocious code for this loop compared to gcc.

We could also strength reduce the rem and the div:
http://www.lcs.mit.edu/pubs/pdf/MIT-LCS-TM-600.pdf

===-------------------------------------------------------------------------===

We generate ugly code for this:

void func(unsigned int *ret, float dx, float dy, float dz, float dw) {
  unsigned code = 0;
  if(dx < -dw) code |= 1;
  if(dx > dw)  code |= 2;
  if(dy < -dw) code |= 4;
  if(dy > dw)  code |= 8;
  if(dz < -dw) code |= 16;
  if(dz > dw)  code |= 32;
  *ret = code;
}

===-------------------------------------------------------------------------===

%struct.B = type { i8, [3 x i8] }

define void @bar(%struct.B* %b) {
entry:
        %tmp = bitcast %struct.B* %b to i32*              ; <uint*> [#uses=1]
        %tmp = load i32* %tmp          ; <uint> [#uses=1]
        %tmp3 = bitcast %struct.B* %b to i32*             ; <uint*> [#uses=1]
        %tmp4 = load i32* %tmp3                ; <uint> [#uses=1]
        %tmp8 = bitcast %struct.B* %b to i32*             ; <uint*> [#uses=2]
        %tmp9 = load i32* %tmp8                ; <uint> [#uses=1]
        %tmp4.mask17 = shl i32 %tmp4, i8 1          ; <uint> [#uses=1]
        %tmp1415 = and i32 %tmp4.mask17, 2147483648            ; <uint> [#uses=1]
        %tmp.masked = and i32 %tmp, 2147483648         ; <uint> [#uses=1]
        %tmp11 = or i32 %tmp1415, %tmp.masked          ; <uint> [#uses=1]
        %tmp12 = and i32 %tmp9, 2147483647             ; <uint> [#uses=1]
        %tmp13 = or i32 %tmp12, %tmp11         ; <uint> [#uses=1]
        store i32 %tmp13, i32* %tmp8
        ret void
}

We emit:

_foo:
        lwz r2, 0(r3)
        slwi r4, r2, 1
        or r4, r4, r2
        rlwimi r2, r4, 0, 0, 0
        stw r2, 0(r3)
        blr

We could collapse a bunch of those ORs and ANDs and generate the following
equivalent code:

_foo:
        lwz r2, 0(r3)
        rlwinm r4, r2, 1, 0, 0
        or r2, r2, r4
        stw r2, 0(r3)
        blr

===-------------------------------------------------------------------------===

Consider a function like this:

float foo(float X) { return X + 1234.4123f; }

The FP constant ends up in the constant pool, so we need to get the LR register.
 This ends up producing code like this:

_foo:
.LBB_foo_0:     ; entry
        mflr r11
***     stw r11, 8(r1)
        bl "L00000$pb"
"L00000$pb":
        mflr r2
        addis r2, r2, ha16(.CPI_foo_0-"L00000$pb")
        lfs f0, lo16(.CPI_foo_0-"L00000$pb")(r2)
        fadds f1, f1, f0
***     lwz r11, 8(r1)
        mtlr r11
        blr

This is functional, but there is no reason to spill the LR register all the way
to the stack (the two marked instrs): spilling it to a GPR is quite enough.

Implementing this will require some codegen improvements.  Nate writes:

"So basically what we need to support the "no stack frame save and restore" is a
generalization of the LR optimization to "callee-save regs".

Currently, we have LR marked as a callee-save reg.  The register allocator sees
that it's callee save, and spills it directly to the stack.

Ideally, something like this would happen:

LR would be in a separate register class from the GPRs. The class of LR would be
marked "unspillable".  When the register allocator came across an unspillable
reg, it would ask "what is the best class to copy this into that I *can* spill"
If it gets a class back, which it will in this case (the gprs), it grabs a free
register of that class.  If it is then later necessary to spill that reg, so be
it.

===-------------------------------------------------------------------------===

We compile this:
int test(_Bool X) {
  return X ? 524288 : 0;
}

to:
_test:
        cmplwi cr0, r3, 0
        lis r2, 8
        li r3, 0
        beq cr0, LBB1_2 ;entry
LBB1_1: ;entry
        mr r3, r2
LBB1_2: ;entry
        blr

instead of:
_test:
        addic r2,r3,-1
        subfe r0,r2,r3
        slwi r3,r0,19
        blr

This sort of thing occurs a lot due to globalopt.

===-------------------------------------------------------------------------===

We compile:

define i32 @bar(i32 %x) nounwind readnone ssp {
entry:
  %0 = icmp eq i32 %x, 0                          ; <i1> [#uses=1]
  %neg = sext i1 %0 to i32              ; <i32> [#uses=1]
  ret i32 %neg
}

to:

_bar:
	cntlzw r2, r3
	slwi r2, r2, 26
	srawi r3, r2, 31
	blr

it would be better to produce:

_bar:
        addic r3,r3,-1
        subfe r3,r3,r3
        blr

===-------------------------------------------------------------------------===

We generate horrible ppc code for this:

#define N  2000000
double   a[N],c[N];
void simpleloop() {
   int j;
   for (j=0; j<N; j++)
     c[j] = a[j];
}

LBB1_1: ;bb
        lfdx f0, r3, r4
        addi r5, r5, 1                 ;; Extra IV for the exit value compare.
        stfdx f0, r2, r4
        addi r4, r4, 8

        xoris r6, r5, 30               ;; This is due to a large immediate.
        cmplwi cr0, r6, 33920
        bne cr0, LBB1_1

//===---------------------------------------------------------------------===//

This:
        #include <algorithm>
        inline std::pair<unsigned, bool> full_add(unsigned a, unsigned b)
        { return std::make_pair(a + b, a + b < a); }
        bool no_overflow(unsigned a, unsigned b)
        { return !full_add(a, b).second; }

Should compile to:

__Z11no_overflowjj:
        add r4,r3,r4
        subfc r3,r3,r4
        li r3,0
        adde r3,r3,r3
        blr

(or better) not:

__Z11no_overflowjj:
        add r2, r4, r3
        cmplw cr7, r2, r3
        mfcr r2
        rlwinm r2, r2, 29, 31, 31
        xori r3, r2, 1
        blr

//===---------------------------------------------------------------------===//

We compile some FP comparisons into an mfcr with two rlwinms and an or.  For
example:
#include <math.h>
int test(double x, double y) { return islessequal(x, y);}
int test2(double x, double y) {  return islessgreater(x, y);}
int test3(double x, double y) {  return !islessequal(x, y);}

Compiles into (all three are similar, but the bits differ):

_test:
	fcmpu cr7, f1, f2
	mfcr r2
	rlwinm r3, r2, 29, 31, 31
	rlwinm r2, r2, 31, 31, 31
	or r3, r2, r3
	blr

GCC compiles this into:

 _test:
	fcmpu cr7,f1,f2
	cror 30,28,30
	mfcr r3
	rlwinm r3,r3,31,1
	blr

which is more efficient and can use mfocr.  See PR642 for some more context.

//===---------------------------------------------------------------------===//

void foo(float *data, float d) {
   long i;
   for (i = 0; i < 8000; i++)
      data[i] = d;
}
void foo2(float *data, float d) {
   long i;
   data--;
   for (i = 0; i < 8000; i++) {
      data[1] = d;
      data++;
   }
}

These compile to:

_foo:
	li r2, 0
LBB1_1:	; bb
	addi r4, r2, 4
	stfsx f1, r3, r2
	cmplwi cr0, r4, 32000
	mr r2, r4
	bne cr0, LBB1_1	; bb
	blr
_foo2:
	li r2, 0
LBB2_1:	; bb
	addi r4, r2, 4
	stfsx f1, r3, r2
	cmplwi cr0, r4, 32000
	mr r2, r4
	bne cr0, LBB2_1	; bb
	blr

The 'mr' could be eliminated to folding the add into the cmp better.

//===---------------------------------------------------------------------===//
Codegen for the following (low-probability) case deteriorated considerably
when the correctness fixes for unordered comparisons went in (PR 642, 58871).
It should be possible to recover the code quality described in the comments.

; RUN: llvm-as < %s | llc -march=ppc32  | grep or | count 3
; This should produce one 'or' or 'cror' instruction per function.

; RUN: llvm-as < %s | llc -march=ppc32  | grep mfcr | count 3
; PR2964

define i32 @test(double %x, double %y) nounwind  {
entry:
	%tmp3 = fcmp ole double %x, %y		; <i1> [#uses=1]
	%tmp345 = zext i1 %tmp3 to i32		; <i32> [#uses=1]
	ret i32 %tmp345
}

define i32 @test2(double %x, double %y) nounwind  {
entry:
	%tmp3 = fcmp one double %x, %y		; <i1> [#uses=1]
	%tmp345 = zext i1 %tmp3 to i32		; <i32> [#uses=1]
	ret i32 %tmp345
}

define i32 @test3(double %x, double %y) nounwind  {
entry:
	%tmp3 = fcmp ugt double %x, %y		; <i1> [#uses=1]
	%tmp34 = zext i1 %tmp3 to i32		; <i32> [#uses=1]
	ret i32 %tmp34
}

//===---------------------------------------------------------------------===//
for the following code:

void foo (float *__restrict__ a, int *__restrict__ b, int n) {
      a[n] = b[n]  * 2.321;
}

we load b[n] to GPR, then move it VSX register and convert it float. We should
use vsx scalar integer load instructions to avoid direct moves

//===----------------------------------------------------------------------===//
; RUN: llvm-as < %s | llc -march=ppc32 | not grep fneg

; This could generate FSEL with appropriate flags (FSEL is not IEEE-safe, and
; should not be generated except with -enable-finite-only-fp-math or the like).
; With the correctness fixes for PR642 (58871) LowerSELECT_CC would need to
; recognize a more elaborate tree than a simple SETxx.

define double @test_FNEG_sel(double %A, double %B, double %C) {
        %D = fsub double -0.000000e+00, %A               ; <double> [#uses=1]
        %Cond = fcmp ugt double %D, -0.000000e+00               ; <i1> [#uses=1]
        %E = select i1 %Cond, double %B, double %C              ; <double> [#uses=1]
        ret double %E
}

//===----------------------------------------------------------------------===//
The save/restore sequence for CR in prolog/epilog is terrible:
- Each CR subreg is saved individually, rather than doing one save as a unit.
- On Darwin, the save is done after the decrement of SP, which means the offset
from SP of the save slot can be too big for a store instruction, which means we
need an additional register (currently hacked in 96015+96020; the solution there
is correct, but poor).
- On SVR4 the same thing can happen, and I don't think saving before the SP
decrement is safe on that target, as there is no red zone.  This is currently
broken AFAIK, although it's not a target I can exercise.
The following demonstrates the problem:
extern void bar(char *p);
void foo() {
  char x[100000];
  bar(x);
  __asm__("" ::: "cr2");
}

//===-------------------------------------------------------------------------===
Naming convention for instruction formats is very haphazard.
We have agreed on a naming scheme as follows:

<INST_form>{_<OP_type><OP_len>}+

Where:
INST_form is the instruction format (X-form, etc.)
OP_type is the operand type - one of OPC (opcode), RD (register destination),
                              RS (register source),
                              RDp (destination register pair),
                              RSp (source register pair), IM (immediate),
                              XO (extended opcode)
OP_len is the length of the operand in bits

VSX register operands would be of length 6 (split across two fields),
condition register fields of length 3.
We would not need denote reserved fields in names of instruction formats.

//===----------------------------------------------------------------------===//

Instruction fusion was introduced in ISA 2.06 and more opportunities added in
ISA 2.07.  LLVM needs to add infrastructure to recognize fusion opportunities
and force instruction pairs to be scheduled together.

-----------------------------------------------------------------------------

More general handling of any_extend and zero_extend:

See https://reviews.llvm.org/D24924#555306

//===- README_ALTIVEC.txt - Notes for improving Altivec code gen ----------===//

Implement PPCInstrInfo::isLoadFromStackSlot/isStoreToStackSlot for vector
registers, to generate better spill code.

//===----------------------------------------------------------------------===//

The first should be a single lvx from the constant pool, the second should be
a xor/stvx:

void foo(void) {
  int x[8] __attribute__((aligned(128))) = { 1, 1, 1, 17, 1, 1, 1, 1 };
  bar (x);
}

#include <string.h>
void foo(void) {
  int x[8] __attribute__((aligned(128)));
  memset (x, 0, sizeof (x));
  bar (x);
}

//===----------------------------------------------------------------------===//

Altivec: Codegen'ing MUL with vector FMADD should add -0.0, not 0.0:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=8763

When -ffast-math is on, we can use 0.0.

//===----------------------------------------------------------------------===//

  Consider this:
  v4f32 Vector;
  v4f32 Vector2 = { Vector.X, Vector.X, Vector.X, Vector.X };

Since we know that "Vector" is 16-byte aligned and we know the element offset
of ".X", we should change the load into a lve*x instruction, instead of doing
a load/store/lve*x sequence.

//===----------------------------------------------------------------------===//

For functions that use altivec AND have calls, we are VRSAVE'ing all call
clobbered regs.

//===----------------------------------------------------------------------===//

Implement passing vectors by value into calls and receiving them as arguments.

//===----------------------------------------------------------------------===//

GCC apparently tries to codegen { C1, C2, Variable, C3 } as a constant pool load
of C1/C2/C3, then a load and vperm of Variable.

//===----------------------------------------------------------------------===//

We need a way to teach tblgen that some operands of an intrinsic are required to
be constants.  The verifier should enforce this constraint.

//===----------------------------------------------------------------------===//

We currently codegen SCALAR_TO_VECTOR as a store of the scalar to a 16-byte
aligned stack slot, followed by a load/vperm.  We should probably just store it
to a scalar stack slot, then use lvsl/vperm to load it.  If the value is already
in memory this is a big win.

//===----------------------------------------------------------------------===//

extract_vector_elt of an arbitrary constant vector can be done with the
following instructions:

vTemp = vec_splat(v0,2);    // 2 is the element the src is in.
vec_ste(&destloc,0,vTemp);

We can do an arbitrary non-constant value by using lvsr/perm/ste.

//===----------------------------------------------------------------------===//

If we want to tie instruction selection into the scheduler, we can do some
constant formation with different instructions.  For example, we can generate
"vsplti -1" with "vcmpequw R,R" and 1,1,1,1 with "vsubcuw R,R", and 0,0,0,0 with
"vsplti 0" or "vxor", each of which use different execution units, thus could
help scheduling.

This is probably only reasonable for a post-pass scheduler.

//===----------------------------------------------------------------------===//

For this function:

void test(vector float *A, vector float *B) {
  vector float C = (vector float)vec_cmpeq(*A, *B);
  if (!vec_any_eq(*A, *B))
    *B = (vector float){0,0,0,0};
  *A = C;
}

we get the following basic block:

	...
        lvx v2, 0, r4
        lvx v3, 0, r3
        vcmpeqfp v4, v3, v2
        vcmpeqfp. v2, v3, v2
        bne cr6, LBB1_2 ; cond_next

The vcmpeqfp/vcmpeqfp. instructions currently cannot be merged when the
vcmpeqfp. result is used by a branch.  This can be improved.

//===----------------------------------------------------------------------===//

The code generated for this is truly aweful:

vector float test(float a, float b) {
 return (vector float){ 0.0, a, 0.0, 0.0};
}

LCPI1_0:                                        ;  float
        .space  4
        .text
        .globl  _test
        .align  4
_test:
        mfspr r2, 256
        oris r3, r2, 4096
        mtspr 256, r3
        lis r3, ha16(LCPI1_0)
        addi r4, r1, -32
        stfs f1, -16(r1)
        addi r5, r1, -16
        lfs f0, lo16(LCPI1_0)(r3)
        stfs f0, -32(r1)
        lvx v2, 0, r4
        lvx v3, 0, r5
        vmrghw v3, v3, v2
        vspltw v2, v2, 0
        vmrghw v2, v2, v3
        mtspr 256, r2
        blr

//===----------------------------------------------------------------------===//

int foo(vector float *x, vector float *y) {
        if (vec_all_eq(*x,*y)) return 3245;
        else return 12;
}

A predicate compare being used in a select_cc should have the same peephole
applied to it as a predicate compare used by a br_cc.  There should be no
mfcr here:

_foo:
        mfspr r2, 256
        oris r5, r2, 12288
        mtspr 256, r5
        li r5, 12
        li r6, 3245
        lvx v2, 0, r4
        lvx v3, 0, r3
        vcmpeqfp. v2, v3, v2
        mfcr r3, 2
        rlwinm r3, r3, 25, 31, 31
        cmpwi cr0, r3, 0
        bne cr0, LBB1_2 ; entry
LBB1_1: ; entry
        mr r6, r5
LBB1_2: ; entry
        mr r3, r6
        mtspr 256, r2
        blr

//===----------------------------------------------------------------------===//

CodeGen/PowerPC/vec_constants.ll has an and operation that should be
codegen'd to andc.  The issue is that the 'all ones' build vector is
SelectNodeTo'd a VSPLTISB instruction node before the and/xor is selected
which prevents the vnot pattern from matching.


//===----------------------------------------------------------------------===//

An alternative to the store/store/load approach for illegal insert element
lowering would be:

1. store element to any ol' slot
2. lvx the slot
3. lvsl 0; splat index; vcmpeq to generate a select mask
4. lvsl slot + x; vperm to rotate result into correct slot
5. vsel result together.

//===----------------------------------------------------------------------===//

Should codegen branches on vec_any/vec_all to avoid mfcr.  Two examples:

#include <altivec.h>
 int f(vector float a, vector float b)
 {
  int aa = 0;
  if (vec_all_ge(a, b))
    aa |= 0x1;
  if (vec_any_ge(a,b))
    aa |= 0x2;
  return aa;
}

vector float f(vector float a, vector float b) {
  if (vec_any_eq(a, b))
    return a;
  else
    return b;
}

//===----------------------------------------------------------------------===//

We should do a little better with eliminating dead stores.
The stores to the stack are dead since %a and %b are not needed

; Function Attrs: nounwind
define <16 x i8> @test_vpmsumb() #0 {
  entry:
  %a = alloca <16 x i8>, align 16
  %b = alloca <16 x i8>, align 16
  store <16 x i8> <i8 1, i8 2, i8 3, i8 4, i8 5, i8 6, i8 7, i8 8, i8 9, i8 10, i8 11, i8 12, i8 13, i8 14, i8 15, i8 16>, <16 x i8>* %a, align 16
  store <16 x i8> <i8 113, i8 114, i8 115, i8 116, i8 117, i8 118, i8 119, i8 120, i8 121, i8 122, i8 123, i8 124, i8 125, i8 126, i8 127, i8 112>, <16 x i8>* %b, align 16
  %0 = load <16 x i8>* %a, align 16
  %1 = load <16 x i8>* %b, align 16
  %2 = call <16 x i8> @llvm.ppc.altivec.crypto.vpmsumb(<16 x i8> %0, <16 x i8> %1)
  ret <16 x i8> %2
}


; Function Attrs: nounwind readnone
declare <16 x i8> @llvm.ppc.altivec.crypto.vpmsumb(<16 x i8>, <16 x i8>) #1


Produces the following code with -mtriple=powerpc64-unknown-linux-gnu:
# %bb.0:                                # %entry
    addis 3, 2, .LCPI0_0@toc@ha
    addis 4, 2, .LCPI0_1@toc@ha
    addi 3, 3, .LCPI0_0@toc@l
    addi 4, 4, .LCPI0_1@toc@l
    lxvw4x 0, 0, 3
    addi 3, 1, -16
    lxvw4x 35, 0, 4
    stxvw4x 0, 0, 3
    ori 2, 2, 0
    lxvw4x 34, 0, 3
    addi 3, 1, -32
    stxvw4x 35, 0, 3
    vpmsumb 2, 2, 3
    blr
    .long   0
    .quad   0

The two stxvw4x instructions are not needed.
With -mtriple=powerpc64le-unknown-linux-gnu, the associated permutes
are present too.

//===----------------------------------------------------------------------===//

The following example is found in test/CodeGen/PowerPC/vec_add_sub_doubleword.ll:

define <2 x i64> @increment_by_val(<2 x i64> %x, i64 %val) nounwind {
       %tmpvec = insertelement <2 x i64> <i64 0, i64 0>, i64 %val, i32 0
       %tmpvec2 = insertelement <2 x i64> %tmpvec, i64 %val, i32 1
       %result = add <2 x i64> %x, %tmpvec2
       ret <2 x i64> %result

This will generate the following instruction sequence:
        std 5, -8(1)
        std 5, -16(1)
        addi 3, 1, -16
        ori 2, 2, 0
        lxvd2x 35, 0, 3
        vaddudm 2, 2, 3
        blr

This will almost certainly cause a load-hit-store hazard.
Since val is a value parameter, it should not need to be saved onto
the stack, unless it's being done set up the vector register. Instead,
it would be better to splat the value into a vector register, and then
remove the (dead) stores to the stack.

//===----------------------------------------------------------------------===//

At the moment we always generate a lxsdx in preference to lfd, or stxsdx in
preference to stfd.  When we have a reg-immediate addressing mode, this is a
poor choice, since we have to load the address into an index register.  This
should be fixed for P7/P8.

//===----------------------------------------------------------------------===//

Right now, ShuffleKind 0 is supported only on BE, and ShuffleKind 2 only on LE.
However, we could actually support both kinds on either endianness, if we check
for the appropriate shufflevector pattern for each case ...  this would cause
some additional shufflevectors to be recognized and implemented via the
"swapped" form.

//===----------------------------------------------------------------------===//

There is a utility program called PerfectShuffle that generates a table of the
shortest instruction sequence for implementing a shufflevector operation on
PowerPC.  However, this was designed for big-endian code generation.  We could
modify this program to create a little endian version of the table.  The table
is used in PPCISelLowering.cpp, PPCTargetLowering::LOWERVECTOR_SHUFFLE().

//===----------------------------------------------------------------------===//

Opportunies to use instructions from PPCInstrVSX.td during code gen
  - Conversion instructions (Sections 7.6.1.5 and 7.6.1.6 of ISA 2.07)
  - Scalar comparisons (xscmpodp and xscmpudp)
  - Min and max (xsmaxdp, xsmindp, xvmaxdp, xvmindp, xvmaxsp, xvminsp)

Related to this: we currently do not generate the lxvw4x instruction for either
v4f32 or v4i32, probably because adding a dag pattern to the recognizer requires
a single target type.  This should probably be addressed in the PPCISelDAGToDAG logic.

//===----------------------------------------------------------------------===//

Currently EXTRACT_VECTOR_ELT and INSERT_VECTOR_ELT are type-legal only
for v2f64 with VSX available.  We should create custom lowering
support for the other vector types.  Without this support, we generate
sequences with load-hit-store hazards.

v4f32 can be supported with VSX by shifting the correct element into
big-endian lane 0, using xscvspdpn to produce a double-precision
representation of the single-precision value in big-endian
double-precision lane 0, and reinterpreting lane 0 as an FPR or
vector-scalar register.

v2i64 can be supported with VSX and P8Vector in the same manner as
v2f64, followed by a direct move to a GPR.

v4i32 can be supported with VSX and P8Vector by shifting the correct
element into big-endian lane 1, using a direct move to a GPR, and
sign-extending the 32-bit result to 64 bits.

v8i16 can be supported with VSX and P8Vector by shifting the correct
element into big-endian lane 3, using a direct move to a GPR, and
sign-extending the 16-bit result to 64 bits.

v16i8 can be supported with VSX and P8Vector by shifting the correct
element into big-endian lane 7, using a direct move to a GPR, and
sign-extending the 8-bit result to 64 bits.

//===- README_P9.txt - Notes for improving Power9 code gen ----------------===//

TODO: Instructions Need Implement Instrinstics or Map to LLVM IR

Altivec:
- Vector Compare Not Equal (Zero):
  vcmpneb(.) vcmpneh(.) vcmpnew(.)
  vcmpnezb(.) vcmpnezh(.) vcmpnezw(.)
  . Same as other VCMP*, use VCMP/VCMPo form (support intrinsic)

- Vector Extract Unsigned: vextractub vextractuh vextractuw vextractd
  . Don't use llvm extractelement because they have different semantics
  . Use instrinstics:
    (set v2i64:$vD, (int_ppc_altivec_vextractub v16i8:$vA, imm:$UIMM))
    (set v2i64:$vD, (int_ppc_altivec_vextractuh v8i16:$vA, imm:$UIMM))
    (set v2i64:$vD, (int_ppc_altivec_vextractuw v4i32:$vA, imm:$UIMM))
    (set v2i64:$vD, (int_ppc_altivec_vextractd  v2i64:$vA, imm:$UIMM))

- Vector Extract Unsigned Byte Left/Right-Indexed:
  vextublx vextubrx vextuhlx vextuhrx vextuwlx vextuwrx
  . Use instrinstics:
    // Left-Indexed
    (set i64:$rD, (int_ppc_altivec_vextublx i64:$rA, v16i8:$vB))
    (set i64:$rD, (int_ppc_altivec_vextuhlx i64:$rA, v8i16:$vB))
    (set i64:$rD, (int_ppc_altivec_vextuwlx i64:$rA, v4i32:$vB))

    // Right-Indexed
    (set i64:$rD, (int_ppc_altivec_vextubrx i64:$rA, v16i8:$vB))
    (set i64:$rD, (int_ppc_altivec_vextuhrx i64:$rA, v8i16:$vB))
    (set i64:$rD, (int_ppc_altivec_vextuwrx i64:$rA, v4i32:$vB))

- Vector Insert Element Instructions: vinsertb vinsertd vinserth vinsertw
    (set v16i8:$vD, (int_ppc_altivec_vinsertb v16i8:$vA, imm:$UIMM))
    (set v8i16:$vD, (int_ppc_altivec_vinsertd v8i16:$vA, imm:$UIMM))
    (set v4i32:$vD, (int_ppc_altivec_vinserth v4i32:$vA, imm:$UIMM))
    (set v2i64:$vD, (int_ppc_altivec_vinsertw v2i64:$vA, imm:$UIMM))

- Vector Count Leading/Trailing Zero LSB. Result is placed into GPR[rD]:
  vclzlsbb vctzlsbb
  . Use intrinsic:
    (set i64:$rD, (int_ppc_altivec_vclzlsbb v16i8:$vB))
    (set i64:$rD, (int_ppc_altivec_vctzlsbb v16i8:$vB))

- Vector Count Trailing Zeros: vctzb vctzh vctzw vctzd
  . Map to llvm cttz
    (set v16i8:$vD, (cttz v16i8:$vB))     // vctzb
    (set v8i16:$vD, (cttz v8i16:$vB))     // vctzh
    (set v4i32:$vD, (cttz v4i32:$vB))     // vctzw
    (set v2i64:$vD, (cttz v2i64:$vB))     // vctzd

- Vector Extend Sign: vextsb2w vextsh2w vextsb2d vextsh2d vextsw2d
  . vextsb2w:
    (set v4i32:$vD, (sext v4i8:$vB))

    // PowerISA_V3.0:
    do i = 0 to 3
       VR[VRT].word[i] ← EXTS32(VR[VRB].word[i].byte[3])
    end

  . vextsh2w:
    (set v4i32:$vD, (sext v4i16:$vB))

    // PowerISA_V3.0:
    do i = 0 to 3
       VR[VRT].word[i] ← EXTS32(VR[VRB].word[i].hword[1])
    end

  . vextsb2d
    (set v2i64:$vD, (sext v2i8:$vB))

    // PowerISA_V3.0:
    do i = 0 to 1
       VR[VRT].dword[i] ← EXTS64(VR[VRB].dword[i].byte[7])
    end

  . vextsh2d
    (set v2i64:$vD, (sext v2i16:$vB))

    // PowerISA_V3.0:
    do i = 0 to 1
       VR[VRT].dword[i] ← EXTS64(VR[VRB].dword[i].hword[3])
    end

  . vextsw2d
    (set v2i64:$vD, (sext v2i32:$vB))

    // PowerISA_V3.0:
    do i = 0 to 1
       VR[VRT].dword[i] ← EXTS64(VR[VRB].dword[i].word[1])
    end

- Vector Integer Negate: vnegw vnegd
  . Map to llvm ineg
    (set v4i32:$rT, (ineg v4i32:$rA))       // vnegw
    (set v2i64:$rT, (ineg v2i64:$rA))       // vnegd

- Vector Parity Byte: vprtybw vprtybd vprtybq
  . Use intrinsic:
    (set v4i32:$rD, (int_ppc_altivec_vprtybw v4i32:$vB))
    (set v2i64:$rD, (int_ppc_altivec_vprtybd v2i64:$vB))
    (set v1i128:$rD, (int_ppc_altivec_vprtybq v1i128:$vB))

- Vector (Bit) Permute (Right-indexed):
  . vbpermd: Same as "vbpermq", use VX1_Int_Ty2:
    VX1_Int_Ty2<1484, "vbpermd", int_ppc_altivec_vbpermd, v2i64, v2i64>;

  . vpermr: use VA1a_Int_Ty3
    VA1a_Int_Ty3<59, "vpermr", int_ppc_altivec_vpermr, v16i8, v16i8, v16i8>;

- Vector Rotate Left Mask/Mask-Insert: vrlwnm vrlwmi vrldnm vrldmi
  . Use intrinsic:
    VX1_Int_Ty<389, "vrlwnm", int_ppc_altivec_vrlwnm, v4i32>;
    VX1_Int_Ty<133, "vrlwmi", int_ppc_altivec_vrlwmi, v4i32>;
    VX1_Int_Ty<453, "vrldnm", int_ppc_altivec_vrldnm, v2i64>;
    VX1_Int_Ty<197, "vrldmi", int_ppc_altivec_vrldmi, v2i64>;

- Vector Shift Left/Right: vslv vsrv
  . Use intrinsic, don't map to llvm shl and lshr, because they have different
    semantics, e.g. vslv:

      do i = 0 to 15
         sh ← VR[VRB].byte[i].bit[5:7]
         VR[VRT].byte[i] ← src.byte[i:i+1].bit[sh:sh+7]
      end

    VR[VRT].byte[i] is composed of 2 bytes from src.byte[i:i+1]

  . VX1_Int_Ty<1860, "vslv", int_ppc_altivec_vslv, v16i8>;
    VX1_Int_Ty<1796, "vsrv", int_ppc_altivec_vsrv, v16i8>;

- Vector Multiply-by-10 (& Write Carry) Unsigned Quadword:
  vmul10uq vmul10cuq
  . Use intrinsic:
    VX1_Int_Ty<513, "vmul10uq",   int_ppc_altivec_vmul10uq,  v1i128>;
    VX1_Int_Ty<  1, "vmul10cuq",  int_ppc_altivec_vmul10cuq, v1i128>;

- Vector Multiply-by-10 Extended (& Write Carry) Unsigned Quadword:
  vmul10euq vmul10ecuq
  . Use intrinsic:
    VX1_Int_Ty<577, "vmul10euq",  int_ppc_altivec_vmul10euq, v1i128>;
    VX1_Int_Ty< 65, "vmul10ecuq", int_ppc_altivec_vmul10ecuq, v1i128>;

- Decimal Convert From/to National/Zoned/Signed-QWord:
  bcdcfn. bcdcfz. bcdctn. bcdctz. bcdcfsq. bcdctsq.
  . Use instrinstics:
    (set v1i128:$vD, (int_ppc_altivec_bcdcfno  v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcdcfzo  v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcdctno  v1i128:$vB))
    (set v1i128:$vD, (int_ppc_altivec_bcdctzo  v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcdcfsqo v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcdctsqo v1i128:$vB))

- Decimal Copy-Sign/Set-Sign: bcdcpsgn. bcdsetsgn.
  . Use instrinstics:
    (set v1i128:$vD, (int_ppc_altivec_bcdcpsgno v1i128:$vA, v1i128:$vB))
    (set v1i128:$vD, (int_ppc_altivec_bcdsetsgno v1i128:$vB, i1:$PS))

- Decimal Shift/Unsigned-Shift/Shift-and-Round: bcds. bcdus. bcdsr.
  . Use instrinstics:
    (set v1i128:$vD, (int_ppc_altivec_bcdso  v1i128:$vA, v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcduso v1i128:$vA, v1i128:$vB))
    (set v1i128:$vD, (int_ppc_altivec_bcdsro v1i128:$vA, v1i128:$vB, i1:$PS))

  . Note! Their VA is accessed only 1 byte, i.e. VA.byte[7]

- Decimal (Unsigned) Truncate: bcdtrunc. bcdutrunc.
  . Use instrinstics:
    (set v1i128:$vD, (int_ppc_altivec_bcdso  v1i128:$vA, v1i128:$vB, i1:$PS))
    (set v1i128:$vD, (int_ppc_altivec_bcduso v1i128:$vA, v1i128:$vB))

  . Note! Their VA is accessed only 2 byte, i.e. VA.hword[3] (VA.bit[48:63])

VSX:
- QP Copy Sign: xscpsgnqp
  . Similar to xscpsgndp
  . (set f128:$vT, (fcopysign f128:$vB, f128:$vA)

- QP Absolute/Negative-Absolute/Negate: xsabsqp xsnabsqp xsnegqp
  . Similar to xsabsdp/xsnabsdp/xsnegdp
  . (set f128:$vT, (fabs f128:$vB))             // xsabsqp
    (set f128:$vT, (fneg (fabs f128:$vB)))      // xsnabsqp
    (set f128:$vT, (fneg f128:$vB))             // xsnegqp

- QP Add/Divide/Multiply/Subtract/Square-Root:
  xsaddqp xsdivqp xsmulqp xssubqp xssqrtqp
  . Similar to xsadddp
  . isCommutable = 1
    (set f128:$vT, (fadd f128:$vA, f128:$vB))   // xsaddqp
    (set f128:$vT, (fmul f128:$vA, f128:$vB))   // xsmulqp

  . isCommutable = 0
    (set f128:$vT, (fdiv f128:$vA, f128:$vB))   // xsdivqp
    (set f128:$vT, (fsub f128:$vA, f128:$vB))   // xssubqp
    (set f128:$vT, (fsqrt f128:$vB)))           // xssqrtqp

- Round to Odd of QP Add/Divide/Multiply/Subtract/Square-Root:
  xsaddqpo xsdivqpo xsmulqpo xssubqpo xssqrtqpo
  . Similar to xsrsqrtedp??
      def XSRSQRTEDP : XX2Form<60, 74,
                               (outs vsfrc:$XT), (ins vsfrc:$XB),
                               "xsrsqrtedp $XT, $XB", IIC_VecFP,
                               [(set f64:$XT, (PPCfrsqrte f64:$XB))]>;

  . Define DAG Node in PPCInstrInfo.td:
    def PPCfaddrto: SDNode<"PPCISD::FADDRTO", SDTFPBinOp, []>;
    def PPCfdivrto: SDNode<"PPCISD::FDIVRTO", SDTFPBinOp, []>;
    def PPCfmulrto: SDNode<"PPCISD::FMULRTO", SDTFPBinOp, []>;
    def PPCfsubrto: SDNode<"PPCISD::FSUBRTO", SDTFPBinOp, []>;
    def PPCfsqrtrto: SDNode<"PPCISD::FSQRTRTO", SDTFPUnaryOp, []>;

    DAG patterns of each instruction (PPCInstrVSX.td):
    . isCommutable = 1
      (set f128:$vT, (PPCfaddrto f128:$vA, f128:$vB))   // xsaddqpo
      (set f128:$vT, (PPCfmulrto f128:$vA, f128:$vB))   // xsmulqpo

    . isCommutable = 0
      (set f128:$vT, (PPCfdivrto f128:$vA, f128:$vB))   // xsdivqpo
      (set f128:$vT, (PPCfsubrto f128:$vA, f128:$vB))   // xssubqpo
      (set f128:$vT, (PPCfsqrtrto f128:$vB))            // xssqrtqpo

- QP (Negative) Multiply-{Add/Subtract}: xsmaddqp xsmsubqp xsnmaddqp xsnmsubqp
  . Ref: xsmaddadp/xsmsubadp/xsnmaddadp/xsnmsubadp

  . isCommutable = 1
    // xsmaddqp
    [(set f128:$vT, (fma f128:$vA, f128:$vB, f128:$vTi))]>,
    RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
    AltVSXFMARel;

    // xsmsubqp
    [(set f128:$vT, (fma f128:$vA, f128:$vB, (fneg f128:$vTi)))]>,
    RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
    AltVSXFMARel;

    // xsnmaddqp
    [(set f128:$vT, (fneg (fma f128:$vA, f128:$vB, f128:$vTi)))]>,
    RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
    AltVSXFMARel;

    // xsnmsubqp
    [(set f128:$vT, (fneg (fma f128:$vA, f128:$vB, (fneg f128:$vTi))))]>,
    RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
    AltVSXFMARel;

- Round to Odd of QP (Negative) Multiply-{Add/Subtract}:
  xsmaddqpo xsmsubqpo xsnmaddqpo xsnmsubqpo
  . Similar to xsrsqrtedp??

  . Define DAG Node in PPCInstrInfo.td:
    def PPCfmarto: SDNode<"PPCISD::FMARTO", SDTFPTernaryOp, []>;

    It looks like we only need to define "PPCfmarto" for these instructions,
    because according to PowerISA_V3.0, these instructions perform RTO on
    fma's result:
        xsmaddqp(o)
        v      ← bfp_MULTIPLY_ADD(src1, src3, src2)
        rnd    ← bfp_ROUND_TO_BFP128(RO, FPSCR.RN, v)
        result ← bfp_CONVERT_TO_BFP128(rnd)

        xsmsubqp(o)
        v      ← bfp_MULTIPLY_ADD(src1, src3, bfp_NEGATE(src2))
        rnd    ← bfp_ROUND_TO_BFP128(RO, FPSCR.RN, v)
        result ← bfp_CONVERT_TO_BFP128(rnd)

        xsnmaddqp(o)
        v      ← bfp_MULTIPLY_ADD(src1,src3,src2)
        rnd    ← bfp_NEGATE(bfp_ROUND_TO_BFP128(RO, FPSCR.RN, v))
        result ← bfp_CONVERT_TO_BFP128(rnd)

        xsnmsubqp(o)
        v      ← bfp_MULTIPLY_ADD(src1, src3, bfp_NEGATE(src2))
        rnd    ← bfp_NEGATE(bfp_ROUND_TO_BFP128(RO, FPSCR.RN, v))
        result ← bfp_CONVERT_TO_BFP128(rnd)

    DAG patterns of each instruction (PPCInstrVSX.td):
    . isCommutable = 1
      // xsmaddqpo
      [(set f128:$vT, (PPCfmarto f128:$vA, f128:$vB, f128:$vTi))]>,
      RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
      AltVSXFMARel;

      // xsmsubqpo
      [(set f128:$vT, (PPCfmarto f128:$vA, f128:$vB, (fneg f128:$vTi)))]>,
      RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
      AltVSXFMARel;

      // xsnmaddqpo
      [(set f128:$vT, (fneg (PPCfmarto f128:$vA, f128:$vB, f128:$vTi)))]>,
      RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
      AltVSXFMARel;

      // xsnmsubqpo
      [(set f128:$vT, (fneg (PPCfmarto f128:$vA, f128:$vB, (fneg f128:$vTi))))]>,
      RegConstraint<"$vTi = $vT">, NoEncode<"$vTi">,
      AltVSXFMARel;

- QP Compare Ordered/Unordered: xscmpoqp xscmpuqp
  . ref: XSCMPUDP
      def XSCMPUDP : XX3Form_1<60, 35,
                               (outs crrc:$crD), (ins vsfrc:$XA, vsfrc:$XB),
                               "xscmpudp $crD, $XA, $XB", IIC_FPCompare, []>;

  . No SDAG, intrinsic, builtin are required??
    Or llvm fcmp order/unorder compare??

- DP/QP Compare Exponents: xscmpexpdp xscmpexpqp
  . No SDAG, intrinsic, builtin are required?

- DP Compare ==, >=, >, !=: xscmpeqdp xscmpgedp xscmpgtdp xscmpnedp
  . I checked existing instruction "XSCMPUDP". They are different in target
    register. "XSCMPUDP" write to CR field, xscmp*dp write to VSX register

  . Use instrinsic:
    (set i128:$XT, (int_ppc_vsx_xscmpeqdp f64:$XA, f64:$XB))
    (set i128:$XT, (int_ppc_vsx_xscmpgedp f64:$XA, f64:$XB))
    (set i128:$XT, (int_ppc_vsx_xscmpgtdp f64:$XA, f64:$XB))
    (set i128:$XT, (int_ppc_vsx_xscmpnedp f64:$XA, f64:$XB))

- Vector Compare Not Equal: xvcmpnedp xvcmpnedp. xvcmpnesp xvcmpnesp.
  . Similar to xvcmpeqdp:
      defm XVCMPEQDP : XX3Form_Rcr<60, 99,
                                 "xvcmpeqdp", "$XT, $XA, $XB", IIC_VecFPCompare,
                                 int_ppc_vsx_xvcmpeqdp, v2i64, v2f64>;

  . So we should use "XX3Form_Rcr" to implement instrinsic

- Convert DP -> QP: xscvdpqp
  . Similar to XSCVDPSP:
      def XSCVDPSP : XX2Form<60, 265,
                          (outs vsfrc:$XT), (ins vsfrc:$XB),
                          "xscvdpsp $XT, $XB", IIC_VecFP, []>;
  . So, No SDAG, intrinsic, builtin are required??

- Round & Convert QP -> DP (dword[1] is set to zero): xscvqpdp xscvqpdpo
  . Similar to XSCVDPSP
  . No SDAG, intrinsic, builtin are required??

- Truncate & Convert QP -> (Un)Signed (D)Word (dword[1] is set to zero):
  xscvqpsdz xscvqpswz xscvqpudz xscvqpuwz
  . According to PowerISA_V3.0, these are similar to "XSCVDPSXDS", "XSCVDPSXWS",
    "XSCVDPUXDS", "XSCVDPUXWS"

  . DAG patterns:
    (set f128:$XT, (PPCfctidz f128:$XB))    // xscvqpsdz
    (set f128:$XT, (PPCfctiwz f128:$XB))    // xscvqpswz
    (set f128:$XT, (PPCfctiduz f128:$XB))   // xscvqpudz
    (set f128:$XT, (PPCfctiwuz f128:$XB))   // xscvqpuwz

- Convert (Un)Signed DWord -> QP: xscvsdqp xscvudqp
  . Similar to XSCVSXDSP
  . (set f128:$XT, (PPCfcfids f64:$XB))     // xscvsdqp
    (set f128:$XT, (PPCfcfidus f64:$XB))    // xscvudqp

- (Round &) Convert DP <-> HP: xscvdphp xscvhpdp
  . Similar to XSCVDPSP
  . No SDAG, intrinsic, builtin are required??

- Vector HP -> SP: xvcvhpsp xvcvsphp
  . Similar to XVCVDPSP:
      def XVCVDPSP : XX2Form<60, 393,
                          (outs vsrc:$XT), (ins vsrc:$XB),
                          "xvcvdpsp $XT, $XB", IIC_VecFP, []>;
  . No SDAG, intrinsic, builtin are required??

- Round to Quad-Precision Integer: xsrqpi xsrqpix
  . These are combination of "XSRDPI", "XSRDPIC", "XSRDPIM", .., because you
    need to assign rounding mode in instruction
  . Provide builtin?
    (set f128:$vT, (int_ppc_vsx_xsrqpi f128:$vB))
    (set f128:$vT, (int_ppc_vsx_xsrqpix f128:$vB))

- Round Quad-Precision to Double-Extended Precision (fp80): xsrqpxp
  . Provide builtin?
    (set f128:$vT, (int_ppc_vsx_xsrqpxp f128:$vB))

Fixed Point Facility:

- Exploit cmprb and cmpeqb (perhaps for something like
  isalpha/isdigit/isupper/islower and isspace respectivelly). This can
  perhaps be done through a builtin.

- Provide testing for cnttz[dw]
- Insert Exponent DP/QP: xsiexpdp xsiexpqp
  . Use intrinsic?
  . xsiexpdp:
    // Note: rA and rB are the unsigned integer value.
    (set f128:$XT, (int_ppc_vsx_xsiexpdp i64:$rA, i64:$rB))

  . xsiexpqp:
    (set f128:$vT, (int_ppc_vsx_xsiexpqp f128:$vA, f64:$vB))

- Extract Exponent/Significand DP/QP: xsxexpdp xsxsigdp xsxexpqp xsxsigqp
  . Use intrinsic?
  . (set i64:$rT, (int_ppc_vsx_xsxexpdp f64$XB))    // xsxexpdp
    (set i64:$rT, (int_ppc_vsx_xsxsigdp f64$XB))    // xsxsigdp
    (set f128:$vT, (int_ppc_vsx_xsxexpqp f128$vB))  // xsxexpqp
    (set f128:$vT, (int_ppc_vsx_xsxsigqp f128$vB))  // xsxsigqp

- Vector Insert Word: xxinsertw
  - Useful for inserting f32/i32 elements into vectors (the element to be
    inserted needs to be prepared)
  . Note: llvm has insertelem in "Vector Operations"
    ; yields <n x <ty>>
    <result> = insertelement <n x <ty>> <val>, <ty> <elt>, <ty2> <idx>

    But how to map to it??
    [(set v1f128:$XT, (insertelement v1f128:$XTi, f128:$XB, i4:$UIMM))]>,
    RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,

  . Or use intrinsic?
    (set v1f128:$XT, (int_ppc_vsx_xxinsertw v1f128:$XTi, f128:$XB, i4:$UIMM))

- Vector Extract Unsigned Word: xxextractuw
  - Not useful for extraction of f32 from v4f32 (the current pattern is better -
    shift->convert)
  - It is useful for (uint_to_fp (vector_extract v4i32, N))
  - Unfortunately, it can't be used for (sint_to_fp (vector_extract v4i32, N))
  . Note: llvm has extractelement in "Vector Operations"
    ; yields <ty>
    <result> = extractelement <n x <ty>> <val>, <ty2> <idx>

    How to map to it??
    [(set f128:$XT, (extractelement v1f128:$XB, i4:$UIMM))]

  . Or use intrinsic?
    (set f128:$XT, (int_ppc_vsx_xxextractuw v1f128:$XB, i4:$UIMM))

- Vector Insert Exponent DP/SP: xviexpdp xviexpsp
  . Use intrinsic
    (set v2f64:$XT, (int_ppc_vsx_xviexpdp v2f64:$XA, v2f64:$XB))
    (set v4f32:$XT, (int_ppc_vsx_xviexpsp v4f32:$XA, v4f32:$XB))

- Vector Extract Exponent/Significand DP/SP: xvxexpdp xvxexpsp xvxsigdp xvxsigsp
  . Use intrinsic
    (set v2f64:$XT, (int_ppc_vsx_xvxexpdp v2f64:$XB))
    (set v4f32:$XT, (int_ppc_vsx_xvxexpsp v4f32:$XB))
    (set v2f64:$XT, (int_ppc_vsx_xvxsigdp v2f64:$XB))
    (set v4f32:$XT, (int_ppc_vsx_xvxsigsp v4f32:$XB))

- Test Data Class SP/DP/QP: xststdcsp xststdcdp xststdcqp
  . No SDAG, intrinsic, builtin are required?
    Because it seems that we have no way to map BF field?

    Instruction Form: [PO T XO B XO BX TX]
    Asm: xststd* BF,XB,DCMX

    BF is an index to CR register field.

- Vector Test Data Class SP/DP: xvtstdcsp xvtstdcdp
  . Use intrinsic
    (set v4f32:$XT, (int_ppc_vsx_xvtstdcsp v4f32:$XB, i7:$DCMX))
    (set v2f64:$XT, (int_ppc_vsx_xvtstdcdp v2f64:$XB, i7:$DCMX))

- Maximum/Minimum Type-C/Type-J DP: xsmaxcdp xsmaxjdp xsmincdp xsminjdp
  . PowerISA_V3.0:
    "xsmaxcdp can be used to implement the C/C++/Java conditional operation
     (x>y)?x:y for single-precision and double-precision arguments."

    Note! c type and j type have different behavior when:
    1. Either input is NaN
    2. Both input are +-Infinity, +-Zero

  . dtype map to llvm fmaxnum/fminnum
    jtype use intrinsic

  . xsmaxcdp xsmincdp
    (set f64:$XT, (fmaxnum f64:$XA, f64:$XB))
    (set f64:$XT, (fminnum f64:$XA, f64:$XB))

  . xsmaxjdp xsminjdp
    (set f64:$XT, (int_ppc_vsx_xsmaxjdp f64:$XA, f64:$XB))
    (set f64:$XT, (int_ppc_vsx_xsminjdp f64:$XA, f64:$XB))

- Vector Byte-Reverse H/W/D/Q Word: xxbrh xxbrw xxbrd xxbrq
  . Use intrinsic
    (set v8i16:$XT, (int_ppc_vsx_xxbrh v8i16:$XB))
    (set v4i32:$XT, (int_ppc_vsx_xxbrw v4i32:$XB))
    (set v2i64:$XT, (int_ppc_vsx_xxbrd v2i64:$XB))
    (set v1i128:$XT, (int_ppc_vsx_xxbrq v1i128:$XB))

- Vector Permute: xxperm xxpermr
  . I have checked "PPCxxswapd" in PPCInstrVSX.td, but they are different
  . Use intrinsic
    (set v16i8:$XT, (int_ppc_vsx_xxperm v16i8:$XA, v16i8:$XB))
    (set v16i8:$XT, (int_ppc_vsx_xxpermr v16i8:$XA, v16i8:$XB))

- Vector Splat Immediate Byte: xxspltib
  . Similar to XXSPLTW:
      def XXSPLTW : XX2Form_2<60, 164,
                           (outs vsrc:$XT), (ins vsrc:$XB, u2imm:$UIM),
                           "xxspltw $XT, $XB, $UIM", IIC_VecPerm, []>;

  . No SDAG, intrinsic, builtin are required?

- Load/Store Vector: lxv stxv
  . Has likely SDAG match:
    (set v?:$XT, (load ix16addr:$src))
    (set v?:$XT, (store ix16addr:$dst))

  . Need define ix16addr in PPCInstrInfo.td
    ix16addr: 16-byte aligned, see "def memrix16" in PPCInstrInfo.td

- Load/Store Vector Indexed: lxvx stxvx
  . Has likely SDAG match:
    (set v?:$XT, (load xoaddr:$src))
    (set v?:$XT, (store xoaddr:$dst))

- Load/Store DWord: lxsd stxsd
  . Similar to lxsdx/stxsdx:
    def LXSDX : XX1Form<31, 588,
                        (outs vsfrc:$XT), (ins memrr:$src),
                        "lxsdx $XT, $src", IIC_LdStLFD,
                        [(set f64:$XT, (load xoaddr:$src))]>;

  . (set f64:$XT, (load iaddrX4:$src))
    (set f64:$XT, (store iaddrX4:$dst))

- Load/Store SP, with conversion from/to DP: lxssp stxssp
  . Similar to lxsspx/stxsspx:
    def LXSSPX : XX1Form<31, 524, (outs vssrc:$XT), (ins memrr:$src),
                         "lxsspx $XT, $src", IIC_LdStLFD,
                         [(set f32:$XT, (load xoaddr:$src))]>;

  . (set f32:$XT, (load iaddrX4:$src))
    (set f32:$XT, (store iaddrX4:$dst))

- Load as Integer Byte/Halfword & Zero Indexed: lxsibzx lxsihzx
  . Similar to lxsiwzx:
    def LXSIWZX : XX1Form<31, 12, (outs vsfrc:$XT), (ins memrr:$src),
                          "lxsiwzx $XT, $src", IIC_LdStLFD,
                          [(set f64:$XT, (PPClfiwzx xoaddr:$src))]>;

  . (set f64:$XT, (PPClfiwzx xoaddr:$src))

- Store as Integer Byte/Halfword Indexed: stxsibx stxsihx
  . Similar to stxsiwx:
    def STXSIWX : XX1Form<31, 140, (outs), (ins vsfrc:$XT, memrr:$dst),
                          "stxsiwx $XT, $dst", IIC_LdStSTFD,
                          [(PPCstfiwx f64:$XT, xoaddr:$dst)]>;

  . (PPCstfiwx f64:$XT, xoaddr:$dst)

- Load Vector Halfword*8/Byte*16 Indexed: lxvh8x lxvb16x
  . Similar to lxvd2x/lxvw4x:
    def LXVD2X : XX1Form<31, 844,
                         (outs vsrc:$XT), (ins memrr:$src),
                         "lxvd2x $XT, $src", IIC_LdStLFD,
                         [(set v2f64:$XT, (int_ppc_vsx_lxvd2x xoaddr:$src))]>;

  . (set v8i16:$XT, (int_ppc_vsx_lxvh8x xoaddr:$src))
    (set v16i8:$XT, (int_ppc_vsx_lxvb16x xoaddr:$src))

- Store Vector Halfword*8/Byte*16 Indexed: stxvh8x stxvb16x
  . Similar to stxvd2x/stxvw4x:
    def STXVD2X : XX1Form<31, 972,
                         (outs), (ins vsrc:$XT, memrr:$dst),
                         "stxvd2x $XT, $dst", IIC_LdStSTFD,
                         [(store v2f64:$XT, xoaddr:$dst)]>;

  . (store v8i16:$XT, xoaddr:$dst)
    (store v16i8:$XT, xoaddr:$dst)

- Load/Store Vector (Left-justified) with Length: lxvl lxvll stxvl stxvll
  . Likely needs an intrinsic
  . (set v?:$XT, (int_ppc_vsx_lxvl xoaddr:$src))
    (set v?:$XT, (int_ppc_vsx_lxvll xoaddr:$src))

  . (int_ppc_vsx_stxvl xoaddr:$dst))
    (int_ppc_vsx_stxvll xoaddr:$dst))

- Load Vector Word & Splat Indexed: lxvwsx
  . Likely needs an intrinsic
  . (set v?:$XT, (int_ppc_vsx_lxvwsx xoaddr:$src))

Atomic operations (l[dw]at, st[dw]at):
- Provide custom lowering for common atomic operations to use these
  instructions with the correct Function Code
- Ensure the operands are in the correct register (i.e. RT+1, RT+2)
- Provide builtins since not all FC's necessarily have an existing LLVM
  atomic operation

Load Doubleword Monitored (ldmx):
- Investigate whether there are any uses for this. It seems to be related to
  Garbage Collection so it isn't likely to be all that useful for most
  languages we deal with.

Move to CR from XER Extended (mcrxrx):
- Is there a use for this in LLVM?

Fixed Point Facility:

- Copy-Paste Facility: copy copy_first cp_abort paste paste. paste_last
  . Use instrinstics:
    (int_ppc_copy_first i32:$rA, i32:$rB)
    (int_ppc_copy i32:$rA, i32:$rB)

    (int_ppc_paste i32:$rA, i32:$rB)
    (int_ppc_paste_last i32:$rA, i32:$rB)

    (int_cp_abort)

- Message Synchronize: msgsync
- SLB*: slbieg slbsync
- stop
  . No instrinstics