xref: /aosp_15_r20/external/cpuinfo/test/dmesg/pixel-xl.log (revision 2b54f0db79fd8303838913b20ff3780cddaa909f)

[    0.529387] c0     43 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused  TURBO: open-loop= 950000 uV
[    0.529568] c0     43 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 308
[    0.529581] c0     43 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    SVS: quot[ 7]= 436, quot_offset[ 7]= 125
[    0.529593] c0     43 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused    NOM: quot[ 7]= 636, quot_offset[ 7]= 200
[    0.529605] c0     43 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused  TURBO: quot[ 7]=1078, quot_offset[ 7]= 440
[    0.530290] c0     43 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
[    0.530480] c0     43 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
[    0.530794] c0     43 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
[    0.533700] c0     43 cpr3_regulator_measure_aging: apcc: average quotient delta=1 (count=10)
[    0.533737] c0     43 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=0 uV
[    0.533957] c0     43 apc1_corner: 0 <--> 0 mV at 0 mV
[    0.536410] c0     43 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: speed bin = 1
[    0.536431] c0     43 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 1
[    0.536443] c0     43 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
[    0.536996] c0     43 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV
[    0.537010] c0     43 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV
[    0.537021] c0     43 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 805000 uV
[    0.537031] c0     43 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 935000 uV
[    0.537254] c0     43 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
[    0.537440] c0     43 gfx_corner: 0 <--> 0 mV at 0 mV
[    0.543139] c0     43 i2c-msm-v2 7577000.i2c: probing driver i2c-msm-v2
[    0.543304] c0     43 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.543319] c0     43 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[    0.545387] c0     43 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2
[    0.545544] c0     43 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.545559] c0     43 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.547334] c0     43 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2
[    0.547476] c0     43 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.547490] c0     43 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.549023] c0     43 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2
[    0.549159] c0     43 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.549173] c0     43 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.550726] c0     43 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2
[    0.550869] c0     43 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[    0.550883] c0     43 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
[    0.552343] c0     43 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 1 and pvs_ver 0
[    0.555291] c0     43 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu0
[    0.555355] c0     43 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu0
[    0.555379] c0     43 clock-cpu-8996: set OPP pair (307200000 Hz, 550000 uv) on cpu1
[    0.555433] c0     43 clock-cpu-8996: set OPP pair (1593600000 Hz, 810000 uv) on cpu1
[    0.555457] c0     43 clock-cpu-8996: set OPP pair (307200000 Hz, 570000 uv) on cpu2
[    0.555531] c0     43 clock-cpu-8996: set OPP pair (2150400000 Hz, 920000 uv) on cpu2
[    0.555554] c0     43 clock-cpu-8996: set OPP pair (307200000 Hz, 570000 uv) on cpu3
[    0.555623] c0     43 clock-cpu-8996: set OPP pair (2150400000 Hz, 920000 uv) on cpu3
[    0.555781] c0     43 clock-cpu-8996: set OPP pair (192000000 Hz, 535000 uv) on soc:qcom,m4m
[    0.555835] c0     43 clock-cpu-8996: set OPP pair (1593600000 Hz, 890000 uv) on soc:qcom,m4m
[    0.556367] c0     43 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 1
[    0.556946] c0     43 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
[    0.556983] c0     43 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 890000 uV) on b00000.qcom,kgsl-3d0
[    0.558738] c0     43 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
[    0.559049] c0     43 pmi8994_boost_5v: no parameters
[    0.559170] c0     43 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
[    0.559288] c0     43 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
[    0.559581] c0     43 pmi8994_boost_pin_ctrl: no parameters
[    0.559668] c0     43 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
[    0.559777] c0     43 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
[    0.561180] c0     43 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
[    0.561209] c0     43 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
[    0.561223] c0     43 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
[    0.561241] c0     43 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
[    0.561260] c0     43 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[    0.561678] c0     43 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    0.561694] c0     43 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.561708] c0     43 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.561733] c0     43 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
[    0.562966] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
[    0.563049] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.563064] c0      4 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
[    0.563444] c0     43 pmi8994_boost_5v: no parameters
[    0.563581] c0     43 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
[    0.563697] c0     43 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
[    0.563984] c0     43 pmi8994_boost_pin_ctrl: no parameters
[    0.564069] c0     43 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
[    0.564174] c0     43 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
[    0.621926] c0      1 KPI: Bootloader start count = 37178
[    0.621948] c0      1 KPI: Bootloader end count = 133094
[    0.621959] c0      1 KPI: Bootloader display count = 69455
[    0.621969] c0      1 KPI: Bootloader load kernel count = 3334
[    0.621982] c0      1 KPI: Kernel MPM timestamp = 164502
[    0.621991] c0      1 KPI: Kernel MPM Clock frequency = 32768
[    0.622018] c0      1 socinfo_print: v0.11, id=305, ver=1.1, raw_id=95, raw_ver=1, hw_plat=1, hw_plat_ver=65536
[    0.622018] c0      1  accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=566723498 num_pmics=2
[    0.622401] c0      1 gdsc_mmagic_bimc: no parameters
[    0.623615] c0      1 usb_otg_vreg: no parameters
[    0.623720] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    0.623840] c0      1 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    0.624077] c0      1 rome_vreg: no parameters
[    0.625041] c0      1 vgaarb: loaded
[    0.627314] c0      1 SCSI subsystem initialized
[    0.628985] c0      1 usbcore: registered new interface driver usbfs
[    0.629046] c0      1 usbcore: registered new interface driver hub
[    0.629216] c0      1 usbcore: registered new device driver usb
[    0.629849] c0      1 soc:usb_nop_phy supply vcc not found, using dummy regulator
[    0.630956] c0      1 media: Linux media interface: v0.10
[    0.631022] c0      1 Linux video capture interface: v2.00
[    0.633875] c0      1 cpufreq: driver msm up and running
[    0.635765] c0      1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
[    0.636619] c0      1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
[    0.637548] c0      1 ION heap system created
[    0.637690] c0      1 ion_heap_create: Heap type is disabled: 1
[    0.637700] c0      1 msm_ion_heap_create: error creating heap kmalloc type 1 base 0x0000000000000000 size 0
[    0.637708] c0      1 ION heap adsp created at 0x00000000f6800000 with size 2000000
[    0.637721] c0      1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
[    0.637735] c0      1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
[    0.637747] c0      1 ION heap secure_heap created
[    0.638808] c0      1 msm_bus_fabric_init_driver
[    0.644602] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
[    0.644624] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
[    0.649730] c0      1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
[    0.650617] c0      1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
[    0.659905] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.659928] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.659943] c0      1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
[    0.660528] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660562] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660589] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660615] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660642] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660670] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.660696] c0      1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
[    0.664089] c0      1 qcom,qpnp-power-on qpnp-power-on-ffffffc0f9263800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[    0.664115] c0      1 qcom,qpnp-power-on qpnp-power-on-ffffffc0f9263800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.664298] c0      1 input: qpnp_pon as /devices/virtual/input/input0
[    0.665082] c0      1 pon_spare_reg: no parameters
[    0.665183] c0      1 qcom,qpnp-power-on qpnp-power-on-ffffffc0f9282000: No PON config. specified
[    0.665244] c0      1 qcom,qpnp-power-on qpnp-power-on-ffffffc0f9282000: PMIC@SID2 Power-on reason: Triggered from USB (USB charger insertion) and 'cold' boot
[    0.665262] c0      1 qcom,qpnp-power-on qpnp-power-on-ffffffc0f9282000: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[    0.665461] c0      1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
[    0.665563] c0      1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
[    0.667487] c0      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.667504] c0      1 ipa ipa_sps_irq_control_all:937 EP (2) not allocated.
[    0.667511] c0      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    0.669645] c1      1 sps:BAM 0x0000000000684000 is registered.
[    0.671076] c1      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.671350] c1      1 sps:BAM 0x0000000000684000 (va:0xffffff80017c0000) enabled: ver:0x27, number of pipes:20
[    0.673603] c1      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.684267] c1      1 ipa ipa2_uc_state_check:296 uC interface not initialized
[    0.687026] c1      1 IPA driver initialization was successful.
[    0.688623] c1      1 gdsc_mmagic_video: no parameters
[    0.689055] c1      1 gdsc_mmagic_mdss: no parameters
[    0.689383] c1      1 gdsc_mmagic_camss: no parameters
[    0.689745] c1      1 gdsc_venus: no parameters
[    0.689786] c1      1 gdsc_venus: supplied by gdsc_mmagic_video
[    0.690345] c1      1 gdsc_venus_core0: fast normal
[    0.690688] c1      1 gdsc_venus_core1: fast normal
[    0.691015] c1      1 gdsc_camss_top: no parameters
[    0.691051] c1      1 gdsc_camss_top: supplied by gdsc_mmagic_camss
[    0.691360] c1      1 gdsc_vfe0: no parameters
[    0.691390] c1      1 gdsc_vfe0: supplied by gdsc_camss_top
[    0.691736] c1      1 gdsc_vfe1: no parameters
[    0.691769] c1      1 gdsc_vfe1: supplied by gdsc_camss_top
[    0.692113] c1      1 gdsc_mdss: no parameters
[    0.692150] c1      1 gdsc_mdss: supplied by gdsc_mmagic_mdss
[    0.692620] c1      1 gdsc_jpeg: no parameters
[    0.692655] c1      1 gdsc_jpeg: supplied by gdsc_camss_top
[    0.692971] c1      1 gdsc_cpp: no parameters
[    0.693002] c1      1 gdsc_cpp: supplied by gdsc_camss_top
[    0.693265] c1      1 gdsc_pcie_0: no parameters
[    0.693661] c1      1 gdsc_pcie_1: no parameters
[    0.693901] c1      1 gdsc_pcie_2: no parameters
[    0.694117] c1      1 gdsc_usb30: no parameters
[    0.694375] c1      1 gdsc_ufs: no parameters
[    0.694805] c1      1 gdsc_fd: no parameters
[    0.694845] c1      1 gdsc_fd: supplied by gdsc_camss_top
[    0.695141] c1      1 gdsc_gpu: no parameters
[    0.695478] c1      1 gdsc_gpu_gx: no parameters
[    0.695871] c1      1 gdsc_gpu_gx: supplied by gfx_corner
[    0.696289] c1      1 gdsc_hlos1_vote_aggre0_noc: no parameters
[    0.696527] c1      1 gdsc_hlos1_vote_lpass_adsp: no parameters
[    0.696957] c1      1 gdsc_hlos1_vote_lpass_core: no parameters
[    0.697195] c1      1 gdsc_aggre0_noc: no parameters
[    0.699951] c1      1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[    0.699990] c1      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[    0.703596] c1      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
[    0.703771] c1      1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[    0.703786] c1      1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[    0.705014] c1      1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
[    0.705797] c1      1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
[    0.705875] c1      1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
[    0.705888] c1      1 mdss_pll_probe: Unable to get the cell-index rc=-22
[    0.837756] c1      1 io-pgtable-fast: selftest: completed with 0 failures
[    1.014624] c2      1 esoc bus registration done
[    1.014709] c2      1 Advanced Linux Sound Architecture Driver Initialized.
[    1.015378] c2      1 Bluetooth: ffffffc0f983fcf8
[    1.015418] c2      1 NET: Registered protocol family 31
[    1.015429] c2      1 Bluetooth: ffffffc0f983fcf8
[    1.015444] c2      1 Bluetooth: ffffffc0f983fcd8Bluetooth: ffffffc0f983fca8
[    1.015488] c2      1 Bluetooth: ffffffc0f983fcb8<1>[    1.016181] c3      1 pcie:pcie_init.
[    1.019599] c2     17 cfg80211: Calling CRDA to update world regulatory domain
[    1.019721] c2     17 cfg80211: World regulatory domain updated:
[    1.019736] c2     17 cfg80211:  DFS Master region: unset
[    1.019744] c2     17 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    1.019758] c2     17 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019766] c2     17 cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019773] c2     17 cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019781] c2     17 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019788] c2     17 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019796] c2     17 cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019804] c2     17 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    1.019811] c2     17 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    1.020219] c3      1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
[    1.023175] c3      1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
[    1.026256] c2     43 pmi8994_boost_5v: no parameters
[    1.026588] c2     43 pmi8994_boost_5v: supplied by pon_spare_reg
[    1.027006] c2     43 pmi8994_boost_pin_ctrl: no parameters
[    1.027042] c2     43 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
[    1.027531] c2     43 ibb_reg: 4600 <--> 6000 mV at 5500 mV
[    1.027865] c2     43 lab_reg: 4600 <--> 6000 mV at 5500 mV
[    1.028261] c2     43 usb_otg_vreg: no parameters
[    1.028350] c2     43 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    1.028445] c2     43 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    1.029213] c3      1 Switched to clocksource arch_sys_counter
[    1.061162] c3      1 bcl_peripheral:bcl_perph_init BCL Initialized
[    1.068909] c3      1 NET: Registered protocol family 2
[    1.069636] c3      1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.069736] c3      1 TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.070276] c3      1 TCP: Hash tables configured (established 32768 bind 32768)
[    1.070424] c3      1 TCP: reno registered
[    1.070453] c3      1 UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.070490] c3      1 UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.070892] c3      1 NET: Registered protocol family 1
[    1.070958] c3      1 PCI: CLS 0 bytes, default 128
[    1.072166] c2     43 usb_otg_vreg: no parameters
[    1.072321] c2     43 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    1.072422] c2     43 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    1.074770] c2      1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
[    1.080538] c2      1 futex hash table entries: 1024 (order: 5, 131072 bytes)
[    1.080661] c2      1 Initialise system trusted keyring
[    1.080752] c2      1 audit: initializing netlink subsys (disabled)
[    1.080867] c2      1 audit: type=2000 audit(1.080:1): initialized
[    1.081556] c2      1 vmscan: error setting kswapd cpu affinity mask
[    1.085994] c2      1 Registering sdcardfs 0.1
[    1.086153] c2      1 fuse init (API version 7.23)
[    1.086383] c2      1 SELinux:  Registering netfilter hooks
[    1.086838] c2      1 pfk [pfk_init]: Driver initialized successfully
[    1.088835] c3      1 Key type asymmetric registered
[    1.088856] c3      1 Asymmetric key parser 'x509' registered
[    1.088866] c3      1 Key type pkcs7_test registered
[    1.089063] c3      1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.089078] c3      1 io scheduler noop registered
[    1.089088] c3      1 io scheduler deadline registered
[    1.089220] c3      1 io scheduler cfq registered (default)
[    1.089230] c3      1 io scheduler test-iosched registered
[    1.101977] c3      1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[    1.103636] c3      1 No change in context(0==0), skip
[    1.104718] c3      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[    1.104726] c3      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
[    1.104733] c3      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
[    1.104740] c3      1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
[    1.104756] c3      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
[    1.104762] c3      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
[    1.104768] c3      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
[    1.104774] c3      1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
[    1.104788] c3      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
[    1.104795] c3      1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
[    1.104809] c3      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
[    1.104815] c3      1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
[    1.104825] c3      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[    1.104899] c3      1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[    1.105420] c3      1 xlog_status: enable:1, panic:1, dump:2
[    1.105715] c3      1 OF: no ranges; cannot translate
[    1.105731] c3      1 OF: no ranges; cannot translate
[    1.106471] c3      1 OF: no ranges; cannot translate
[    1.106481] c3      1 OF: no ranges; cannot translate
[    1.106631] c3      1 OF: no ranges; cannot translate
[    1.106640] c3      1 OF: no ranges; cannot translate
[    1.106914] c3      1 OF: no ranges; cannot translate
[    1.106926] c3      1 OF: no ranges; cannot translate
[    1.107159] c3      1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
[    1.108837] c3      1 mdss_rotator_init_queue: work thread name=rot_thread_0
[    1.109102] c3      1 mdss_rotator_init_queue: work thread name=rot_thread_1
[    1.112916] c3      1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[    1.113113] c3      1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
[    1.113240] c3      1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[    1.113462] c3      1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
[    1.116824] c3      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[    1.117148] c3      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
[    1.117166] c3      1 mdss_dsi_panel_init: Panel Name = M1 WQHD SAMSUNG S6E3HA3 5.5 command mode panel
[    1.117250] c3      1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (ffffffc0f983f2d8)
[    1.117267] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    1.117274] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    1.117280] c3      1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[    1.117352] c3      1 mdss_dsi_parse_panel_features: partial_update_enabled=0
[    1.117361] c3      1 mdss_dsi_parse_panel_features: ulps feature disabled
[    1.117369] c3      1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    1.117376] c3      1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    1.117393] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
[    1.117439] c3      1 mdss_dsi_parse_rgb_gain: PA[0] = 0x2788
[    1.117445] c3      1 mdss_dsi_parse_rgb_gain: PA[1] = 0x13f
[    1.117450] c3      1 mdss_dsi_parse_rgb_gain: PA[2] = 0x11f
[    1.117455] c3      1 mdss_dsi_parse_rgb_gain: PA[3] = 0x164
[    1.117461] c3      1 mdss_dsi_parse_rgb_gain: R = 0x142, G = 0x122 B = 0x168
[    1.117622] c3      1 mdss_dsi_parse_ctrl_params:3887 Unable to read qcom,display-id, data=0000000000000000,len=20
[    1.117688] c3      1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[    1.117737] c3      1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
[    1.117756] c3      1 mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
[    1.117763] c3      1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b96000 ctrl_size=400 phy_base=ffffff8001b98400 phy_size=588
[    1.118021] c3      1 dsi_panel_device_register: Continuous splash enabled
[    1.118626] c3      1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
[    1.140838] c3      1 ERR_FG request IRQ
[    1.141116] c3      1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
[    1.141960] c3      1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[    1.142272] c3      1 mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:1:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd:cfg:split_dsi panel_name:qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd
[    1.142287] c3      1 mdss_dsi_panel_init: Panel Name = M1 WQHD SAMSUNG S6E3HA3 5.5 command mode panel
[    1.142374] c3      1 mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_samsung_s6e3ha3_wqhd_cmd" (ffffffc0f983f2d8)
[    1.142391] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[    1.142399] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[    1.142467] c3      1 mdss_dsi_parse_panel_features: partial_update_enabled=0
[    1.142477] c3      1 mdss_dsi_parse_panel_features: ulps feature disabled
[    1.142484] c3      1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[    1.142492] c3      1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[    1.142508] c3      1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
[    1.142558] c3      1 mdss_dsi_parse_rgb_gain: PA[0] = 0x2788
[    1.142564] c3      1 mdss_dsi_parse_rgb_gain: PA[1] = 0x13f
[    1.142569] c3      1 mdss_dsi_parse_rgb_gain: PA[2] = 0x11f
[    1.142574] c3      1 mdss_dsi_parse_rgb_gain: PA[3] = 0x164
[    1.142579] c3      1 mdss_dsi_parse_rgb_gain: R = 0x142, G = 0x122 B = 0x168
[    1.142779] c3      1 mdss_dsi_parse_ctrl_params:3887 Unable to read qcom,display-id, data=0000000000000000,len=20
[    1.142850] c3      1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[    1.142897] c3      1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
[    1.142918] c3      1 mdss_dsi_retrieve_ctrl_resources+0x170/0x1f4->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
[    1.142926] c3      1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001b9c000 ctrl_size=400 phy_base=ffffff8001b9e400 phy_size=558
[    1.142950] c3      1 dsi_panel_device_register: Continuous splash enabled
[    1.143675] c3      1 panel_debug_register_base: debugfs_create_file: data_type fail
[    1.144122] c3      1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
[    1.145575] c3      1 mdss_dsi_status_init: DSI status check interval:3000
[    1.145970] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.146055] c3      1 hdmi_tx_get_dt_data:4349 Unable to read qcom,display-id, data=0000000000000000,len=0
[    1.146094] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.146101] c3      1 hdmi_tx_pinctrl_init: failed to get pinctrl
[    1.146124] c3      1 hdmi_tx_init_resource: 'core_physical': start = 0xffffff8001bb4000, len=0x50c
[    1.146134] c3      1 hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001bb8000, len=0x6158
[    1.146231] c3      1 hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001bb6000, len=0xfff
[    1.147393] c3      1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
[    1.149696] c3      1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[    1.151831] c3      1 mdss_fb_probe: fb0: split_mode:2 left:720 right:720
[    1.152796] c3      1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
[    1.154251] c3      1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[    1.154364] c3      1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
[    1.154788] c3      1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
[    1.160410] c3      1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
[    1.160588] c3      1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
[    1.160670] c3      1 mdss_mdp_splash_parse_dt: splash mem child node is not present
[    1.179898] c3      1 In memshare_probe, Memshare probe success
[    1.181791] c3      1 msm_rpmstats_probe: ERROR rpm_stats debugfs_create_file	fail
[    1.181817] c3      1 msm_rpm_stat: probe of 2a1fa0.qcom,rpm-stats failed with error -12
[    1.186428] c3      1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
[    1.187554] c3      1 msm_rpm_log_probe: OK
[    1.188753] c3      1 RPM Version: 148.0.5
[    1.192398] c3      1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
[    1.193302] c3      1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap_signed segments only will be dumped.
[    1.196340] c0      4 smd_channel_probe_now: allocation table not initialized
[    1.196485] c3      1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
[    1.199949] c2      1 input: qbt1000_key_input as /devices/virtual/input/input2
[    1.201906] c2      1 uart_tx_gpio is not available
[    1.201928] c2      1 uart_rx_gpio is not available
[    1.201935] c2      1 uart_cts_gpio is not available
[    1.201940] c2      1 uart_rfr_gpio is not available
[    1.202998] c2      1 sps: BAM device 0x0000000007544000 is not registered yet.
[    1.203192] c2      1 sps:BAM 0x0000000007544000 is registered.
[    1.204860] c2      1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 18, base_baud = 460800) is a MSM HS UART
[    1.207313] c2      1 msm_serial_hs module loaded
[    1.208221] c2      1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe().
[    1.209193] c2      1 msm_serial_hsl_init: driver initialized
[    1.222849] c2      1 kgsl: use zap firmware : a530_zap_signed
[    1.262603] c2      1 brd: module loaded
[    1.264031] c2      1 loop: module loaded
[    1.264254] c2      1 zram: Created 1 device(s) ...
[    1.265432] c2      1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
[    1.265476] c2      1 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[    1.265486] c2      1 QSEECOM: qseecom_probe: no-clock-support=0x1<4>[    1.265496] c2      1 QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[    1.269974] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_active
[    1.270000] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_reset_reset
[    1.270007] c2      1 fpc1020 soc:fp_fpc1020: found pin control fpc1020_irq_active
[    1.270134] c2      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_reset_reset'
[    1.270153] c2      1 fpc1020 soc:fp_fpc1020: Selected 'fpc1020_irq_active'
[    1.270512] c2      1 fpc1020 soc:fp_fpc1020: fpc1020_probe: ok
[    1.270894] c2      1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    1.270900] c2      1 i2c-core: driver [tabla-i2c-core] using legacy resume method
[    1.270967] c2      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[    1.270973] c2      1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[    1.271034] c2      1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
[    1.271040] c2      1 i2c-core: driver [tasha-i2c-core] using legacy resume method
[    1.273032] c2      1 [NFC] pn551_dev_init: Loading pn551 driver
[    1.273119] c2      1 [NFC] pn551_probe:
[    1.273261] c2      1 [NFC] pn551_probe : vreg_l6 regulator_get
[    1.273284] c2      1 [NFC] pn551_probe : vreg_l6 regulator_set_voltage
[    1.273294] c2      1 [NFC] pn551_probe : vreg_l6 regulator_enable
[    1.273300] c2      1 [NFC] pn551_probe : vreg_l6 regulator_is_enabled = 1
[    1.273307] c2      1 [NFC] pn551_parse_dt: Start
[    1.273315] c2      1 [NFC] pn551_parse_dt:ven_isinvert = 0
[    1.273321] c2      1 [NFC] pn551_parse_dt: chk irq-gpio
[    1.273610] c2      1 [NFC] pn551_parse_dt: chk ven-gpio
[    1.273637] c2      1 [NFC] pn551_parse_dt: chk fwdl-gpio
[    1.273661] c2      1 [NFC] pn551_parse_dt: chk nfc_i2c pins
[    1.273704] c2      1 [NFC] pn551_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
[    1.273729] c2      1 [NFC] pn551_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
[    1.273745] c2      1 [NFC] pn551_probe : irq_gpio set input 0
[    1.273758] c2      1 [NFC] pn551_probe : ven_gpio set 0 0
[    1.273767] c2      1 [NFC] pn551_probe : firm_gpio set 0 0
[    1.273772] c2      1 [NFC] pn551_probe: init io_wake_lock
[    1.273879] c2      1 [NFC] pn551_probe : requesting IRQ 405
[    1.274024] c2      1 [NFC] pn551_probe: Turn off NFC VEN by default
[    1.274031] c2      1 [NFC] pn551_Disable: gpio=12 set_value=0
[    1.274050] c2      1 [NFC] pn551_Disable: [NFC] gpio=12 check ven_gpio value=0
[    1.274056] c2      1 [NFC] pn551_probe: Probe success!
[    1.274078] c2      1 i2c-core: driver [pn551] using legacy suspend method
[    1.274083] c2      1 i2c-core: driver [pn551] using legacy resume method
[    1.275342] c2      1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
[    1.275364] c2      1 qce 660000.qcedev: CE device = 0x0
[    1.275364] c2      1 , IO base, CE = 0xffffff8003e40000
[    1.275364] c2      1 , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
[    1.275364] c2      1 IO base BAM = 0x          (null)
[    1.275364] c2      1 BAM IRQ 247
[    1.275364] c2      1 Engines Availability = 0x2011053
[    1.275600] c2      1 sps:BAM 0x0000000000644000 is registered.
[    1.275867] c2      1 sps:BAM 0x0000000000644000 (va:0xffffff8003ec0000) enabled: ver:0x27, number of pipes:16
[    1.276130] c2      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
[    1.285468] c2      1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
[    1.285496] c2      1 qcrypto 660000.qcrypto: CE device = 0x0
[    1.285496] c2      1 , IO base, CE = 0xffffff8003f00000
[    1.285496] c2      1 , Consumer (IN) PIPE 4,    Producer (OUT) PIPE 5
[    1.285496] c2      1 IO base BAM = 0x          (null)
[    1.285496] c2      1 BAM IRQ 247
[    1.285496] c2      1 Engines Availability = 0x2011053
[    1.285913] c2      1 QCE50: qce_sps_init:  Qualcomm MSM CE-BAM at 0x0000000000644000 irq 247
[    1.292334] c2      1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
[    1.292441] c2      1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
[    1.292572] c3      1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
[    1.292687] c3      1 qcrypto 660000.qcrypto: qcrypto-ecb-des
[    1.292786] c3      1 qcrypto 660000.qcrypto: qcrypto-cbc-des
[    1.292917] c3      1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
[    1.293016] c3      1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
[    1.293111] c3      1 qcrypto 660000.qcrypto: qcrypto-xts-aes
[    1.293205] c3      1 qcrypto 660000.qcrypto: qcrypto-sha1
[    1.293300] c3      1 qcrypto 660000.qcrypto: qcrypto-sha256
[    1.293409] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[    1.293528] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[    1.293611] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[    1.293711] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[    1.293802] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[    1.293894] c3      1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[    1.293988] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
[    1.294083] c3      1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
[    1.294172] c3      1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
[    1.294263] c3      1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
[    1.297397] c2      1 ICE IRQ = 30
[    1.297564] c2      1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[    1.297619] c2      1 ICE IRQ = 31
[    1.302668] c2      1 qcom_ice_get_pdevice: found ice device ffffffc0f6bd5a00
[    1.302689] c2      1 qcom_ice_get_pdevice: matching platform device ffffffc0f9205000
[    1.303239] c2      1 scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
[    1.303973] c2      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -2
[    1.303984] c2      1 ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -2
[    1.305035] c2      1 scsi host0: ufshcd
[    1.308745] c2      1 qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8002360000
[    1.315289] c2      1 SCSI Media Changer driver v0.25
[    1.317517] c2      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.319851] c2      1 spi_master spi6: will run message pump with realtime priority
[    1.321539] c2      1 sps:BAM 0x0000000007544000 (va:0xffffff8002e40000) enabled: ver:0x19, number of pipes:24
[    1.322340] c2      1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    1.323818] c2      1 tun: Universal TUN/TAP device driver, 1.6
[    1.323828] c2      1 tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.323899] c2      1 PPP generic driver version 2.4.2
[    1.323978] c2      1 PPP BSD Compression module registered
[    1.323987] c2      1 PPP Deflate Compression module registered
[    1.324022] c2      1 PPP MPPE Compression module registered
[    1.324035] c2      1 NET: Registered protocol family 24
[    1.349620] c3     49 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[    1.356726] c2      1 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[    1.360586] c2      1 msm_pcie_enable: PCIe RC0 PHY is ready!
[    1.370696] c2      1 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[    1.412711] c2      1 msm_pcie_enable: PCIe RC0 link initialized
[    1.412825] c2      1 PCI host bridge /soc/qcom,pcie@00600000 ranges:
[    1.412839] c2      1   No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
[    1.412865] c2      1    IO 0x0c200000..0x0c2fffff -> 0x0c200000
[    1.412877] c2      1   MEM 0x0c300000..0x0cffffff -> 0x0c300000
[    1.423054] c2      1 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
[    1.423066] c2      1 pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.423075] c2      1 pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
[    1.423083] c2      1 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
[    1.423146] c2      1 pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
[    1.423244] c2      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs
[    1.423257] c2      1 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.423312] c2      1 pci 0000:00:00.0: IOMMU is currently not supported for PCI
[    1.423435] c2      1 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    1.423477] c2      1 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
[    1.423703] c2      1 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.423915] c2      1 pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
[    1.424064] c2      1 msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs
[    1.424075] c2      1 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.424231] c2      1 pci 0000:01:00.0: IOMMU is currently not supported for PCI
[    1.424404] c2      1 pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    1.424907] c2      1 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.425014] c2      1 msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs
[    1.425044] c2      1 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c5fffff]
[    1.425052] c2      1 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
[    1.425102] c2      1 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[    1.425352] c2      1 pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.425387] c2      1 pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c5fffff]
[    1.426869] c2      1 cnss soc:qcom,cnss: for AR6320 segments only will be dumped.
[    1.438986] c2      1 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[    1.441375] c2      1 cnss: Platform driver probed successfully.
[    1.444068] c2      1 usbcore: registered new interface driver asix
[    1.444109] c2      1 usbcore: registered new interface driver ax88179_178a
[    1.444137] c2      1 usbcore: registered new interface driver cdc_ether
[    1.444163] c2      1 usbcore: registered new interface driver net1080
[    1.444190] c2      1 usbcore: registered new interface driver cdc_subset
[    1.444217] c2      1 usbcore: registered new interface driver zaurus
[    1.444529] c2      1 usbcore: registered new interface driver cdc_ncm
[    1.445171] c2     81 msm_sharedmem: sharedmem_register_qmi: qmi init successful
[    1.449168] c2      1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[    1.451748] c2      1 rtel: rtel_probe: Device created for client 'rtel'
[    1.459068] c2      1 msm-dwc3 6a00000.ssusb: unable to get dbm device
[    1.462741] c2      1 usbcore: registered new interface driver usb-storage
[    1.462783] c2      1 usbcore: registered new interface driver ums-alauda
[    1.462813] c2      1 usbcore: registered new interface driver ums-cypress
[    1.462834] c2      1 usbcore: registered new interface driver ums-datafab
[    1.462854] c2      1 usbcore: registered new interface driver ums-freecom
[    1.462874] c2      1 usbcore: registered new interface driver ums-isd200
[    1.462899] c2      1 usbcore: registered new interface driver ums-jumpshot
[    1.462918] c2      1 usbcore: registered new interface driver ums-karma
[    1.462938] c2      1 usbcore: registered new interface driver ums-sddr09
[    1.462959] c2      1 usbcore: registered new interface driver ums-sddr55
[    1.462978] c2      1 usbcore: registered new interface driver ums-usbat
[    1.463055] c2      1 usbcore: registered new interface driver usbserial
[    1.463082] c2      1 usbcore: registered new interface driver usb_ehset_test
[    1.464438] c2      1 fusb302 9-0022: fusb30x_probe
[    1.464452] c2      1 FUSB [fusb30x_SetChip] chip->client addr = 0x22
[    1.465705] c2      1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x13 (ok)
[    1.466355] c2      1 FUSB  fusb_InitializeGPIO - INT_N GPIO initialized as pin '124'
[    1.466367] c2      1 fusb_InitializeGPIO - Warning: Could not get GPIO for Debug GPIO! Error code: -2
[    1.470280] c2      1 FUSB platform_notify_cc_orientation: orientation=[0], CC1=[5], CC2=[5]
[    1.470882] c2      1 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x0), pd_state(0x0)
[    1.472027] c2      1 fusb302 9-0022: FUSB  fusb30x_probe - FUSB30X Driver loaded successfully!
[    1.472714] c2      1 gbridge_init: gbridge_init successs.
[    1.472892] c2      1 mousedev: PS/2 mouse device common for all mice
[    1.473114] c2      1 usbcore: registered new interface driver xpad
[    1.474071] c2      1 [TP]: parse_config
[    1.474998] c0    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    1.475019] c0    251 FUSB StateMachineTypeC: enter
[    1.475725] c0    251 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 0
[    1.477243] c0     49 ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
[    1.477493] c0     49 ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
[    1.478061] c0     49 scsi 0:0:0:49488: Well-known LUN    TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.479592] c0     49 scsi 0:0:0:49456: Well-known LUN    TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.481165] c0     49 scsi 0:0:0:49476: Well-known LUN    TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.482932] c3    247 scsi 0:0:0:0: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.484408] c3    247 scsi 0:0:0:1: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.485636] c3    247 scsi 0:0:0:2: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.486866] c3    247 scsi 0:0:0:3: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.488094] c3    247 scsi 0:0:0:4: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.489328] c3    247 scsi 0:0:0:5: Direct-Access     TOSHIBA  THGBF7T0L8LBATAB 0300 PQ: 0 ANSI: 6
[    1.504076] c2      1 i2c-msm-v2 7577000.i2c: msm_bus_scale_register_client(mstr-id:86):0x14 (ok)
[    1.504573] c2      1 [TP]:check_chip_exist: Synaptics chip exist
[    1.514236] c2      1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
[    1.514866] c2      1 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
[    1.515106] c2      1 [TP]:synaptics_rmi4_f12_init report data init done
[    1.522859] c2      1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    1.523793] c2      1 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
[    1.524217] c2      1 input: synaptics_dsxv26 as /devices/soc/7577000.i2c/i2c-3/3-0020/input/input3
[    1.524440] c2    257  sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[    1.525148] c2      1 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
[    1.526064] c0      6  sdb: sdb1
[    1.528006] c2      1 input: hbtp_vm as /devices/virtual/input/input4
[    1.528200] c2      1 [LASER] stmvl53l0_init: Enter
[    1.528206] c2      1 [LASER] stmvl53l0_init_i2c: Enter
[    1.529111] c2      1 [LASER] stmvl53l0_probe: Enter++
[    1.529159] c2      1 [LASER] Laser_parse_dt: pwdn_gpio = 94
[    1.529291] c2      1 [LASER] Laser_parse_dt: laser_irq_gpio = 62
[    1.529312] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: sensor cali_size = 768
[    1.529318] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[100] = 67
[    1.529324] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[101] = 00
[    1.529329] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[102] = 05
[    1.529335] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[103] = 0f
[    1.529340] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[104] = 67
[    1.529345] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[105] = 00
[    1.529350] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[106] = 08
[    1.529355] c2      1 [LASER] Laser_parse_dt: gyro sensor cali_data[107] = 00
[    1.529360] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update offset_kvalue = 15
[    1.529365] c2      1 [LASER] Laser_parse_dt: Laser_parse_dt: Update xtalk_kvalue = 0x8
[    1.529371] c2      1 [LASER] Laser_parse_dt: Update SpadCount = 5 and IsAperture = 0
[    1.529376] c2      1 [LASER] stmvl53l0_parse_vdd: Enter++
[    1.529420] c2      1 12-0029 supply vdd not found, using dummy regulator
[    1.529460] c2      1 [LASER] stmvl53l0_parse_vdd: End--
[    1.529466] c2      1 [LASER] Laser_pinctrl_init: Enter++
[    1.529657] c2      1 [LASER] Laser_pinctrl_init: End--
[    1.529663] c2      1 [LASER] stmvl53l0_setup: Enter++
[    1.529686] c2      1 [LASER] stmvl53l0_setup: register_irq: 417
[    1.530061] c2      1 [LASER] stmvl53l0_setup: interrupt is hooked
[    1.530209] c2      1 input: STM VL53L0 proximity sensor as /devices/virtual/input/input5
[    1.530279] c2      1 [LASER] stmvl53l0_setup: Misc device registration name:12-0029
[    1.530940] c2      1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok)
[    1.531279] c2      1 [LASER] stmvl53l0_setupAPIFunctions: read REVISION_ID: 0x10
[    1.531279] c2      1  API_VERSION: 1.1.20.2
[    1.531285] c2      1 [LASER] stmvl53l0_setupAPIFunctions: to setup API cut 1.1
[    1.531298] c2      1 [LASER] stmvl53l0_init_client: Enter
[    1.531303] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_DataInit
[    1.538148] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_StaticInit
[    1.540944] c3    247  sdc: sdc1
[    1.544454] c0    256  sde: sde1 sde2 sde3 sde4 sde5 sde6
[    1.546133] c0     43  sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
[    1.548444] c0     49  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36
[    1.581494] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    1.581515] c0      0 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[    1.581545] c0      0 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[    1.581562] c0      0 ->action():           (null)
[    1.581569] c0      0    IRQ_NOPROBE set
[    1.581575] c0      0  IRQ_NOREQUEST set
[    1.581581] c0      0   IRQ_NOTHREAD set
[    1.595128] c2      1 [LASER] stmvl53l0_init_client: Perform and set VhvSettings = 28 and PhaseCal = 1
[    1.596285] c2      1 [LASER] stmvl53l0_init_client: Set refSpadCount = 5 and isApertureSpads = 0
[    1.596436] c2      1 [LASER] stmvl53l0_init_client: Set offset = 15
[    1.596725] c2      1 [LASER] stmvl53l0_init_client: Set xtalk = 0x8
[    1.596731] c2      1 [LASER] stmvl53l0_init_client: Set RIT - 68
[    1.596736] c2      1 [LASER] stmvl53l0_init_client: Call of VL53L0_SetDeviceMode
[    1.597060] c2      1 [LASER] stmvl53l0_init_client: End
[    1.597068] c2      1 [LASER] stmvl53l0_setup: support ver. 1.1.20.2(1.0.5.1) enabled
[    1.597073] c2      1 [LASER] stmvl53l0_setup: End--
[    1.597079] c2      1 [LASER] stmvl53l0_probe: Success--
[    1.597145] c2      1 [LASER] stmvl53l0_init_i2c: End with rc:0
[    1.597153] c2      1 [LASER] stmvl53l0_init: End
[    1.598677] c2      1 qcom,qpnp-rtc qpnp-rtc-ffffffc0f9281400: rtc core: registered qpnp_rtc as rtc0
[    1.598919] c2      1 i2c /dev entries driver
[    1.599188] c2      1 [AUD] tfa9888: tfa9888_init
[    1.599237] c2      1 i2c-core: driver [tfa9888] using legacy suspend method
[    1.599243] c2      1 i2c-core: driver [tfa9888] using legacy resume method
[    1.636074] c3      1 vmem: Up and running with 4 banks of memory from [io  size 0x3f06c7cdc9 64bit pref window disabled]
[    1.656085] c3      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
[    1.656112] c3      1 msm_actuator_platform_probe:1934 ERR:msm_actuator_platform_probe: Error in reading actuator pinctrl
[    1.656216] c3      1 qcom,actuator: probe of a0c000.qcom,cci:qcom,actuator@0 failed with error -22
[    1.658173] c3      1 msm_eeprom_platform_probe failed 1663
[    1.658817] c3      1 msm_eeprom_platform_probe failed 1663
[    1.660715] c3      1 msm_camera_pinctrl_init:1185 Getting pinctrl handle failed
[    1.660737] c3      1 msm_ois_platform_probe:739 ERR:msm_ois_platform_probe: Error in reading OIS pinctrl
[    1.660855] c3      1 qcom,ois: probe of a0c000.qcom,cci:qcom,ois@0 failed with error -22
[    1.665512] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.671414] c3      1 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    1.671437] c3      1 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    1.685770] c3      1 __msm_jpeg_init:1537] Jpeg Device id 0
[    1.687005] c3      1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
[    1.692704] c3      1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
[    1.790057] c3      1 msm_fd aa4000.qcom,fd: Face detection halt timeout
[    1.792066] c3      1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1e (ok)
[    1.792465] c3      1 SMB1351 smb1351_parallel_slave_probe: smb1351 parallel successfully probed.
[    1.794798] c3      1 htc_battery_init: can't find compatible 'htc,htc_battery_store'
[    1.795077] c2    256 ------------[ cut here ]------------
[    1.795109] c2    256 WARNING: CPU: 2 PID: 256 at /usr/local/google/buildbot/src/partner-android/n-dev-msm-marlin-3.18-nyc-mr1/private/msm-google/include/linux/of.h:770 fg_probe+0x2494/0x26cc()
[    1.795123] c2    256 CPU: 2 PID: 256 Comm: kworker/u8:4 Not tainted 3.18.31-g367e645 #1
[    1.795130] c2    256 Hardware name: HTC Corporation. MSM8996pro v1.1 + PMI8996 Marlin A (DT)
[    1.795147] c2    256 Workqueue: events_unbound async_run_entry_fn
[    1.795159] c2    256 Call trace:
[    1.795172] c2    256 [<ffffffc00008aab4>] dump_backtrace+0x0/0x23c
[    1.795179] c2    256 [<ffffffc00008ad04>] show_stack+0x14/0x1c
[    1.795197] c2    256 [<ffffffc000e3428c>] dump_stack+0x80/0xa4
[    1.795206] c2    256 [<ffffffc0000a41d4>] warn_slowpath_common+0x88/0xb0
[    1.795212] c2    256 [<ffffffc0000a4340>] warn_slowpath_null+0x18/0x20
[    1.795219] c2    256 [<ffffffc0007942f8>] fg_probe+0x2494/0x26cc
[    1.795231] c2    256 [<ffffffc000aa1c4c>] spmi_drv_probe+0x14/0x1c
[    1.795243] c2    256 [<ffffffc00050368c>] driver_probe_device+0xd4/0x224
[    1.795250] c2    256 [<ffffffc00050388c>] __driver_attach+0x64/0x90
[    1.795261] c2    256 [<ffffffc000501dac>] bus_for_each_dev+0x80/0xb0
[    1.795266] c2    256 [<ffffffc000503974>] driver_attach+0x20/0x28
[    1.795273] c2    256 [<ffffffc000502680>] bus_add_driver+0xf0/0x1c0
[    1.795279] c2    256 [<ffffffc0005043a8>] driver_register+0x94/0xe0
[    1.795286] c2    256 [<ffffffc000aa28e8>] spmi_driver_register+0x5c/0x64
[    1.795298] c2    256 [<ffffffc0014f4550>] fg_init_async+0x18/0x20
[    1.795304] c2    256 [<ffffffc0000c1464>] async_run_entry_fn+0x48/0xf8
[    1.795315] c2    256 [<ffffffc0000b9834>] process_one_work+0x25c/0x43c
[    1.795321] c2    256 [<ffffffc0000b9d38>] worker_thread+0x324/0x440
[    1.795329] c2    256 [<ffffffc0000beba0>] kthread+0xec/0xf4
[    1.795405] c2    256 ---[ end trace 44bbc645b98a1e6b ]---
[    1.796472] c3      1 [BATT] Probe process: (2, 1)
[    1.796517] c0     43 [BATT] htc_battery_fb_register in
[    1.796517] c3      1 [BATT] htc_battery_init done.
[    1.797698] c2    256 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
[    1.798705] c3      1 set restart reason = 0x776655AA
[    1.798719] c3      1 set restart msg = 'Unknown'
[    1.799629] c2     17 FG: update_irq_volt_empty: voltage = 3050, converted_raw = 0038
[    1.800623] c3      1 unable to find DT imem DLOAD mode node
[    1.802466] c3      1 unable to find DT imem EDLOAD mode node
[    1.837174] c3      1 device-mapper: uevent: version 1.0.3
[    1.837359] c3      1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[    1.837507] c3      1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
[    1.837507] c3      1
[    1.839172] c3      1 bt_power bt_qca6174: no qca,bt-vdd-core-voltage-level property
[    1.839315] c3      1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
[    1.839323] c3      1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
[    1.839329] c3      1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
[    1.840139] c3      1 sdhci: Secure Digital Host Controller Interface driver
[    1.840148] c3      1 sdhci: Copyright(c) Pierre Ossman
[    1.840156] c3      1 sdhci-pltfm: SDHCI platform and OF driver helper
[    1.841202] c3      1 qcom_ice_get_pdevice: found ice device ffffffc0f6bd5e00
[    1.841213] c3      1 qcom_ice_get_pdevice: matching platform device ffffffc0f9205400
[    1.841411] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.841461] c3      1 sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
[    1.841647] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    1.841659] c3      1 sdhci_msm 74a4900.sdhci: Parsing Pinctrl failed with -22, falling back on GPIO lib
[    1.844000] c3      1 pm8994_l21: requested voltage range [2950000, 2950000] does not fit within constraints: [3000000, 3300000]
[    1.844015] c3      1 sdhci_msm_vreg_set_voltage: regulator_set_voltage(vdd)failed. min_uV=2950000,max_uV=2950000,ret=-22
[    1.844024] c3      1 sdhci_msm 74a4900.sdhci: vreg reset failed (-22)
[    1.844030] c3      1 sdhci_msm 74a4900.sdhci: Regulator setup failed (-22)
[    1.844961] c3      1 sdhci_msm: probe of 74a4900.sdhci failed with error -22
[    1.850839] c3      1 hidraw: raw HID events driver (C) Jiri Kosina
[    1.851113] c3      1 usbcore: registered new interface driver usbhid
[    1.851120] c3      1 usbhid: USB HID core driver
[    1.851696] c3      1 ashmem: initialized
[    2.030184] c2    256 [TP]:fwu_start_reflash: Start of reflash process
[    2.476719] c0    251 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 1
[    2.554509] c3      1 nanohub: loaded; ret=0
[    2.554657] c3      1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[    2.567668] c3      1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[    2.569453] c3      1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
[    2.569504] c3      1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
[    2.572353] c3      1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
[    2.576606] c3      1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
[    2.576774] c3      1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
[    2.576906] c3      1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
[    2.577032] c3      1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
[    2.581754] c3      1 Trustonic TEE: MobiCore mcDrvModuleApi version is 2.1
[    2.581764] c3      1 Trustonic TEE: MobiCore t-base-QC-MSM8996-Android-302B-V001-20150529_084320_16
[    2.583613] c3      1 [NC] == NC_probe ==
[    2.583625] c3      1 [NC] Init GPIO pins
[    2.583902] c3      1 usbcore: registered new interface driver snd-usb-audio
[    2.585342] c3      1 tfa98xx_i2c_init(): TFA98XX driver version 2.10.1-a
[    2.585387] c3      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe
[    2.585796] c3      1 tfa98xx_i2c_probe(): TFA9891 detected
[    2.585813] c3      1 tfa98xx 7-0034: Skipping IRQ registration
[    2.585939] c3      1 tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
[    2.586799] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.586888] c3      1 msm8996-pinctrl 1010000.pinctrl: could not parse property pins
[    2.599305] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[    2.599595] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[    2.599607] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.599788] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
[    2.599798] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.599975] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
[    2.599985] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.600202] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
[    2.600212] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.600241] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[    2.600415] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[    2.600425] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.600602] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
[    2.600613] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.600785] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
[    2.600795] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.600970] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
[    2.600980] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.601004] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[    2.601181] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[    2.601190] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.601369] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
[    2.601378] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.601559] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
[    2.601568] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.601748] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
[    2.601757] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.601782] c3      1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[    2.601957] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[    2.601966] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.602138] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
[    2.602147] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.602320] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
[    2.602329] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.602504] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
[    2.602513] c3      1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[    2.605269] c3      1 msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp
[    2.615871] c3      1 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.615884] c3      1 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.615894] c3      1 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.615939] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.615963] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.615985] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.616006] c3      1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.616028] c3      1 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.617839] c3      1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.619973] c3      1 GACT probability NOT on
[    2.619990] c3      1 Mirror/redirect action on
[    2.620007] c3      1 u32 classifier
[    2.620012] c3      1     Actions configured
[    2.620088] c3      1 Netfilter messages via NETLINK v0.30.
[    2.620123] c3      1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.620313] c3      1 ctnetlink v0.93: registering with nfnetlink.
[    2.620670] c3      1 xt_time: kernel timezone is -0000
[    2.620828] c3      1 ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.620917] c3      1 arp_tables: (C) 2002 David S. Miller
[    2.620947] c3      1 TCP: cubic registered
[    2.620955] c3      1 Initializing XFRM netlink socket
[    2.621171] c3      1 NET: Registered protocol family 10
[    2.621720] c2      1 mip6: Mobile IPv6
[    2.621738] c2      1 ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.621815] c2      1 sit: IPv6 over IPv4 tunneling driver
[    2.622076] c2      1 NET: Registered protocol family 17
[    2.622094] c2      1 NET: Registered protocol family 15
[    2.622123] c2      1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.622138] c2      1 Bridge firewalling registered
[    2.622145] c2      1 Ebtables v2.0 registered
[    2.622298] c3      1 Bluetooth: ffffffc0f983fcb8
[    2.622309] c3      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fce8
[    2.622341] c3      1 Bluetooth: ffffffc0f983fcc8Bluetooth: ffffffc0f983fcc8
[    2.622353] c3      1 Bluetooth: ffffffc0f983fca8Bluetooth: ffffffc0f983fd18
[    2.622365] c3      1 Bluetooth: ffffffc0f983fcf8<6>[    2.622396] c3      1 l2tp_core: L2TP core driver, V2.0
[    2.622409] c3      1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    2.622415] c3      1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[    2.622432] c3      1 l2tp_netlink: L2TP netlink interface
[    2.622451] c3      1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[    2.622467] c3      1 l2tp_debugfs: L2TP debugfs support
[    2.622473] c3      1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[    2.623470] c3      1 NET: Registered protocol family 27
[    2.625232] c0     43 usb_otg_vreg: no parameters
[    2.625317] c0     43 reg-fixed-voltage soc:usb-otg-switch: Failed to find supply vin
[    2.625391] c0     43 reg-fixed-voltage soc:usb-otg-switch: Failed to register regulator: -517
[    2.628656] c1     43 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
[    2.630570] c1     43 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
[    2.632677] c1     43 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
[    2.633422] c1     43 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
[    2.636663] c1     43 sps:BAM 0x0000000006b04000 is registered.
[    2.638494] c1     43 qpnp-smbcharger qpnp-smbcharger-ffffffc0f9283400: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.638524] c1     43 SMBCHG: smbchg_check_chg_version: PMI8996 version = v1.1
[    2.638686] c1     43 smbcharger_charger_otg: no parameters
[    2.638848] c1     43 smbcharger_external_otg: no parameters
[    2.638891] c1     43 smbcharger_external_otg: supplied by pmi8994_boost_5v
[    2.639332] c1     43 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.639359] c1     43 SMBCHG: usb_suspend: 7 voting for 0 - off
[    2.639771] c1     43 SMBCHG: usb_suspend: 0 voting for 0 - off
[    2.639778] c1     43 SMBCHG: dc_suspend: 0 voting for 0 - off
[    2.639842] c1     43 SMBCHG: dcl_icl: 0 voting for 1500 - on
[    2.639884] c1     43 SMBCHG: fcc: 1 voting for 3200 - on
[    2.640105] c1     43 SMBCHG: hwaicl_enable_indirect: 0 voting for 0 - on
[    2.640112] c1     43 SMBCHG: hwaicl_disable: 0 voting for 0 - off
[    2.663562] c1     43 SMBCHG: hwaicl_disable: 1 voting for 0 - off
[    2.663570] c1     43 SMBCHG: usb_suspend: 6 voting for 0 - off
[    2.663635] c1     43 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.663642] c1     43 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.663915] c1     43 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
[    2.666142] c1     43 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 0 -> 4
[    2.666389] c1     43 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 4 -> 4
[    2.687365] c1    162 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
[    2.694330] c1     43 qpnp-smbcharger qpnp-smbcharger-ffffffc0f9283400: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
[    2.694351] c1     43 smbchg_debug_mask=0x6
[    2.694375] c1    162 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.694418] c1    162 SMBCHG: smbchg_cc_esr_wa_check: Not in fast charge, skipping
[    2.694425] c1    162 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.694433] c1    162 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.694438] c1    162 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.694465] c1    162 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.694483] c1    162 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    2.694490] c1    162 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.694520] c0    356 SMBCHG: power_ok_handler: triggered: 0x00. prev_power_ok(-1) power_ok(0)
[    2.694538] c1    162 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    2.694809] c1     43 SMBCHG: rerun_hvdcp_det_if_necessary: HVDCP not support, return directly
[    2.698051] c1     43 qpnp-smbcharger qpnp-smbcharger-ffffffc0f9283400: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
[    2.698058] c1     43 [BATT] Probe process: (0, 2)
[    2.698111] c1     43 SMBCHG: handle_usb_insertion: triggered
[    2.698136] c1     43 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
[    2.698142] c1     43 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
[    2.698150] c1     43 SMBCHG: usb_icl: 0 voting for 100 - on
[    2.698156] c1     43 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
[    2.698161] c1     43 SMBCHG: usb_suspend: 2 voting for 0 - off
[    2.698257] c0    356 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(0) power_ok(1)
[    2.698263] c1     43 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
[    2.698275] c1     43 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    2.698360] c1    335 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.698369] c1    335 SMBCHG: usb_icl: 0 voting for 0 - on
[    2.698374] c1    335 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    2.698380] c1    335 SMBCHG: usb_suspend: 2 voting for 0 - on
[    2.698407] c1    335 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
[    2.698423] c1    335 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.698456] c0    356 SMBCHG: power_ok_handler: triggered: 0x00.
[    2.698951] c1     43 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
[    2.698957] c1     43 SMBCHG: smbchg_rerun_aicl: Rerunning AICL...
[    2.699135] c1     13 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    2.699154] c1     13 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    2.751379] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.751394] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.751406] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.751517] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.751553] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.751586] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.751618] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.751649] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.753935] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.754369] c1     43 usb_otg_vreg: no parameters
[    2.754413] c1     43 usb_otg_vreg: supplied by smbcharger_external_otg
[    2.755958] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.755973] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.755985] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.756093] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.756127] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.756158] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.756190] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.756222] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.758526] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.759362] c3      1 Loading compiled-in X.509 certificates
[    2.759654] c3      1 Loaded X.509 cert 'Google Inc.: Android: 34e81e2c57675086f628c1b2e4b4ade8e0a1941d'
[    2.759884] c3      1 Loaded X.509 cert 'Google Inc.: Android: 7580d366b6e2804279fd88e290c82a5a7d5dd610'
[    2.760136] c3      1 Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[    2.760365] c3      1 Loaded X.509 cert 'Google Inc.: Android: 01c0e929566dbaa236b29ae14be86f003332a866'
[    2.761035] c3      1 Key type encrypted registered
[    2.797880] c2      1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
[    2.797954] c2      1 adsprpc: channel link type: 0
[    2.807466] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.807481] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.807493] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.807603] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.807639] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.807670] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.807702] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.807736] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.809954] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.811495] c2      1 RNDIS_IPA module is loaded.
[    2.812055] c2      1 file system registered
[    2.812097] c2      1 mbim_init: initialize 1 instances
[    2.812141] c2      1 mbim_init: Initialized 1 ports
[    2.812462] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.812474] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.812486] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.812602] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.812637] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.812669] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.812700] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.812733] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.813002] c2      1 rndis_qc_init: initialize rndis QC instance
[    2.813142] c2      1 Number of LUNs=8
[    2.813152] c2      1 Mass Storage Function, version: 2009/09/11
[    2.813157] c2      1 LUN: removable file: (no medium)
[    2.813171] c2      1 Number of LUNs=1
[    2.813202] c2      1 LUN: removable file: (no medium)
[    2.813207] c2      1 Number of LUNs=1
[    2.813397] c2      1 android_usb gadget: android_usb ready
[    2.815307] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.816788] c2      1 [KEY] keycode = 115, gpio = 126, irq = 481
[    2.816830] c2      1 [KEY] keycode = 116, gpio = 40, irq = 395[KEY] keycode = 114, gpio = 121, irq = 476
[    2.816982] c2      1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
[    2.817403] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.817417] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.817431] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.817587] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.817627] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.817662] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.817696] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.817731] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.818116] c2      1 qcom,qpnp-rtc qpnp-rtc-ffffffc0f9281400: setting system clock to 1970-06-03 04:09:03 UTC (13234143)
[    2.820346] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.822273] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.822288] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.822300] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.822413] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.822450] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.822483] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.822516] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.822548] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.825037] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.826656] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
[    2.826973] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
[    2.827144] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
[    2.827265] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.827276] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.827288] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.827305] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
[    2.827421] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.827465] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.827469] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
[    2.827515] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.827547] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.827579] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.827627] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
[    2.827787] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
[    2.827949] c2      1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
[    2.829970] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.830802] c2      1 parse_cpu_levels: idx 1 545
[    2.830812] c2      1 parse_cpu_levels: idx 2 6022
[    2.830817] c2      1 parse_cpu_levels: idx 2 11499
[    2.830902] c2      1 parse_cpu_levels: idx 1 545
[    2.830906] c2      1 parse_cpu_levels: idx 2 6022
[    2.830910] c2      1 parse_cpu_levels: idx 2 11499
[    2.831779] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.831790] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.831802] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.831923] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.831959] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.831993] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.832027] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.832059] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.834588] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.834993] c2      1 [FLT] qpnp_flash_led_probe: ++
[    2.835147] c2      1 [FLT] flash_strobe = 22
[    2.835160] c2      1 qcom,qpnp-flash-led qpnp-flash-led-ffffffc0f928d800: Unable to acquire pinctrl
[    2.836179] c2      1 [FLT] qpnp_flash_led_probe: --
[    2.836367] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.836379] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.836390] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.836498] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.836533] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.836564] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.836596] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.836628] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.838020] c2      1 rmnet_ipa started initialization
[    2.838041] c2      1 IPA SSR support = True
[    2.838057] c2      1 IPA ipa-loaduC = True
[    2.838073] c2      1 IPA SG support = True
[    2.839114] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.839964] c2      1 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    2.839973] c2      1 ipa ipa2_uc_state_check:301 uC is not loaded
[    2.840733] c2      1 rmnet_ipa completed initialization
[    2.841056] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.841069] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.841081] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.841198] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.841236] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.841270] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.841303] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.841335] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.843898] c1     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.845490] c1     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.845505] c1     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.845516] c1     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.845625] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.845659] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.845689] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.845720] c1     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.845756] c1     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.845972] c2      1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
[    2.848041] c3     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.848178] c2      1 usb_otg_vreg: disabling
[    2.848226] c2      1 rome_vreg: disabling
[    2.848231] c2      1 gdsc_mmagic_bimc: disabling
[    2.848266] c2      1 kryo1-retention: disabling
[    2.848271] c2      1 kryo0-retention: disabling
[    2.848275] c2      1 gfx_mem_acc_corner: disabling
[    2.848280] c2      1 apcc_l3_mem_acc_corner: disabling
[    2.848284] c2      1 apc1_perfcl_mem_acc_corner: disabling
[    2.848288] c2      1 apc0_pwrcl_mem_acc_corner: disabling
[    2.848296] c2      1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[    2.848721] c2      1 clock_late_init: Removing enables held for handed-off clocks
[    2.849316] c3     43 [AUD] snd_soc_msm8996: uart_gpios_init done
[    2.849327] c3     43 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    2.849336] c3     43 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    2.849383] c3     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    2.849406] c3     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    2.849429] c3     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    2.849452] c3     43 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    2.849474] c3     43 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    2.851295] c3     43 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    2.852982] c2      1 ALSA device list:
[    2.852988] c2      1   No soundcards found.
[    2.853041] c2      1 Warning: unable to open an initial console.
[    2.853060] c2      1 dm: attempting early device configuration.
[    2.853634] c3      1 device-mapper: init: adding target '0 1 android-verity 259:17    '
[    2.853648] c3      1 device-mapper: android-verity: key:id:34e81e2c57675086f628c1b2e4b4ade8e0a1941d dev:259:17
[    2.857791] c3      1 device-mapper: android-verity: bio magic_number:2952900609 protocol_version:0 table_length:236
[    2.857800] c3      1 device-mapper: android-verity: verity_table: 1 /dev/block/bootdevice/by-name/system /dev/block/bootdevice/by-name/system 4096 4096 516099 516099 sha256 494d7d23b2e10b53bf2a2d627d99c3d427e9552f58d44871feed4991927542eb aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7
[    2.858051] c3      1 device-mapper: android-verity: Signature verification success
[    2.858059] c3      1 device-mapper: android-verity: Data sectors 4128792
[    2.858535] c2      1 device-mapper: android-verity: android-verity mounted as verity target
[    2.858733] c2      1 dm: dm-0 is ready
[    2.860098] c3      1 EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[    2.860392] c3      1 EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
[    2.863921] c2      1 EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[    2.863951] c2      1 VFS: Mounted root (ext4 filesystem) readonly on device 253:0.
[    2.864046] c2      1 Freeing unused kernel memory: 492K (ffffffc0014b7000 - ffffffc001532000)
[    2.864069] c2      1 Freeing alternatives memory: 76K (ffffffc001532000 - ffffffc001545000)
[    2.873565] c3      1 init: init first stage started!
[    2.877765] c3      1 SELinux: 2048 avtab hash slots, 7819 rules.
[    2.879659] c3      1 SELinux: 2048 avtab hash slots, 7819 rules.
[    2.879671] c3      1 SELinux:  1 users, 2 roles, 797 types, 0 bools, 1 sens, 1024 cats
[    2.879677] c3      1 SELinux:  63 classes, 7819 rules
[    2.880517] c3      1 SELinux:  Class can_socket not defined in policy.
[    2.880529] c3      1 SELinux: the above unknown classes and permissions will be denied
[    2.880549] c3      1 SELinux:  Completing initialization.
[    2.880552] c3      1 SELinux:  Setting up existing superblocks.
[    2.880563] c3      1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.880576] c3      1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
[    2.880585] c3      1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.880602] c3      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.880616] c3      1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.912156] c3      1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.912170] c3      1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.912178] c3      1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
[    2.912184] c3      1 SELinux: initialized (dev aio, type aio), not configured for labeling
[    2.912192] c3      1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.912207] c3      1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[    2.912217] c3      1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.912290] c3      1 SELinux: initialized (dev dm-0, type ext4), uses xattr
[    2.912350] c3      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.912366] c3      1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.916155] c2      1 audit: type=1403 audit(13234143.593:2): policy loaded auid=4294967295 ses=4294967295
[    2.916433] c2      1 audit: type=1404 audit(13234143.593:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.916835] c2      1 init: (Initializing SELinux enforcing took 0.04s.)
[    2.921528] c2      1 init: init second stage started!
[    2.925455] c2      1 init: Running restorecon...
[    3.136575] c2      1 init: waitpid failed: No child processes
[    3.140352] c2      1 init: (Loading properties from /default.prop took 0.00s.)
[    3.142407] c3      1 init: (Parsing /init.environ.rc took 0.00s.)
[    3.143708] c3      1 init: (Parsing /init.usb.rc took 0.00s.)
[    3.145046] c3      1 init: ignored duplicate definition of service 'hci_filter_root'init: (Parsing init.marlin.nanohub.rc took 0.00s.)
[    3.145976] c2      1 init: (Parsing init.marlin.usb.rc took 0.00s.)
[    3.146283] c3      1 init: (Parsing init.common.diag.rc took 0.00s.)
[    3.146296] c3      1 init: (Parsing /init.marlin.rc took 0.00s.)
[    3.146910] c2      1 init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    3.147252] c3      1 init: (Parsing /init.zygote64_32.rc took 0.00s.)
[    3.147265] c3      1 init: (Parsing /init.rc took 0.01s.)
[    3.147968] c2      1 init: Starting service 'ueventd'...
[    3.148421] c2      1 init: Waiting for /dev/.coldboot_done...
[    3.149990] c0    410 ueventd: ueventd started!
[    3.200086] c1    162 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.200126] c1    162 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.200134] c1    162 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    3.321039] c2     17 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
[    3.321051] c2     17 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
[    3.321064] c2     17 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
[    3.321070] c2     17 FG: fg_batt_profile_init: batt_fcc_ma = 3400
[    3.321075] c2     17 FG: fg_batt_profile_init: batt_capacity_mah = 3450
[    3.321080] c2     17 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
[    3.325047] c2     17 SMBCHG: battchg_suspend: 0 voting for 0 - on
[    3.480049] c0    251 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x2), pd_state(0x0), retry: 2
[    3.480061] c0    251 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.607660] c1    251 FUSB fusb_GPIO_Set_VBus5v: set vbus ctrl: 0, typec_state(0x3), pd_state(0x0), retry: 0
[    3.607674] c1    251 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    3.609232] c1    251 FUSB platform_notify_cc_orientation: orientation=[1], CC1=[4], CC2=[0]
[    3.659777] c3    410 ueventd: Coldboot took 0.50s.
[    3.662946] c2      1 init: Waiting for /dev/.coldboot_done took 0.51s.
[    3.663947] c2      1 keychord: using input dev qpnp_pon for fevent
[    3.663955] c2      1 keychord: using input dev HDMI CEC User or Deck Control for fevent
[    3.663961] c2      1 keychord: using input dev qbt1000_key_input for fevent
[    3.663980] c2      1 keychord: using input dev gpio-keys for fevent
[    3.664587] c2      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.664950] c2      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.665562] c2      1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.667296] c2      1 init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[    3.667328] c2      1 init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[    3.668051] c2      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.668815] c2      1 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[    3.671478] c2      1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
[    3.671642] c2      1 Registered swp emulation handler
[    3.703417] c1    162 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1700
[    3.703458] c1    162 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    3.837162] c2    412 fs_mgr: Enabling dm-verity for vendor (mode 2)
[    3.837211] c2    412 fs_mgr: loading verity table: '1 /dev/block/bootdevice/by-name/vendor_a /dev/block/bootdevice/by-name/vendor_a 4096 4096 75590 75590 sha256 e2c9ab9a233bc67e0b29e960d41719d720b98c0541628d663f56b4ae39e2b99b aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/bootdevice/by-name/vendor_a fec_start 76195 fec_blocks 76195 fec_roots 2 ignore_zero_blocks'
[    3.842609] c2    412 EXT4-fs (dm-1): mounting with "discard" option, but the device does not support discard
[    3.842622] c2    412 EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,discard
[    3.842638] c2    412 SELinux: initialized (dev dm-1, type ext4), uses xattr
[    3.842695] c2    412 fs_mgr: __mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0
[    3.843988] c2    412 SELinux: initialized (dev sda25, type vfat), uses mountpoint labeling
[    3.844013] c2    412 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/modem_a,target=/firmware/radio,type=vfat)=0
[    3.845929] c3      1 init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[    3.846264] c3      1 init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[    3.846516] c3      1 init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[    3.846856] c3      1 init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[    3.847143] c3      1 init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[    3.847471] c3      1 init: (Parsing /system/etc/init/cppreopts.rc took 0.00s.)
[    3.847726] c3      1 init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[    3.847972] c3      1 init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[    3.848218] c3      1 init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[    3.848539] c3      1 init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[    3.848785] c3      1 init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[    3.849032] c3      1 init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[    3.849275] c3      1 init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[    3.849570] c3      1 init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[    3.849824] c3      1 init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[    3.850092] c3      1 init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[    3.850350] c3      1 init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[    3.850648] c3      1 init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[    3.850894] c3      1 init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[    3.851147] c3      1 init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[    3.851394] c3      1 init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[    3.851695] c3      1 init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[    3.851957] c3      1 init: (Parsing /system/etc/init/otapreopt.rc took 0.00s.)
[    3.852202] c3      1 init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[    3.852449] c3      1 init: (Parsing /system/etc/init/recovery-persist.rc took 0.00s.)
[    3.852739] c3      1 init: (Parsing /system/etc/init/recovery-refresh.rc took 0.00s.)
[    3.852991] c3      1 init: (Parsing /system/etc/init/rild.rc took 0.00s.)
[    3.853253] c3      1 init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[    3.853498] c3      1 init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[    3.853805] c3      1 init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[    3.854068] c3      1 init: (Parsing /system/etc/init/update_engine.rc took 0.00s.)
[    3.854313] c3      1 init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[    3.854589] c3      1 init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[    3.856130] c3      1 zram0: detected capacity change from 0 to 536870912
[    3.865484] c1    423 random: mkswap urandom read with 122 bits of entropy available
[    3.895760] c2    256 [TP]:fwu_go_nogo: Device firmware ID = 2433782
[    3.895770] c2    256 [TP]:fwu_go_nogo: Image firmware ID = 2433782
[    3.895775] c2    256 [TP]:fwu_go_nogo: Image firmware ID is the same as device firmware ID
[    3.895780] c2    256 [TP]:fwu_go_nogo: No need to do reflash
[    3.895791] c2    256 [TP]:synaptics_rmi4_reset_device from synaptics_fw_updater+0xd00/0x10a0, rebuild = 0
[    3.896474] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    3.896485] c0      0 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[    3.896500] c0      0 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[    3.896511] c0      0 ->action():           (null)
[    3.896516] c0      0    IRQ_NOPROBE set
[    3.896521] c0      0  IRQ_NOREQUEST set
[    3.896526] c0      0   IRQ_NOTHREAD set
[    3.915652] c3      1 Adding 524284k swap on /dev/block/zram0.  Priority:-1 extents:1 across:524284k SS
[    3.923159] c3      1 EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: barrier=1
[    3.923180] c3      1 SELinux: initialized (dev sdd3, type ext4), uses xattr
[    3.924793] c3    256 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
[    3.925183] c3      1 audit: type=1400 audit(13234144.603:4): avc:  denied  { write } for  pid=1 comm="init" name="tracing_on" dev="debugfs" ino=8269 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[    3.925204] c3      1 init: write_file: Unable to open '/sys/kernel/debug/tracing/tracing_on': Permission denied
[    3.925420] c3    256 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
[    3.925681] c3    256 [TP]:synaptics_rmi4_f12_init report data init done
[    3.926291] c3      1 init: Starting service 'logd'...
[    3.926953] c3      1 EXT4-fs (dm-0): re-mounted. Opts: (null)
[    3.933644] c3    256 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    3.934598] c3    256 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
[    3.940526] c3    256 [TP]:fwu_start_reflash: End of reflash process
[    3.940536] c3    256 [TP]:synaptics_config_updater
[    3.941492] c3    256 [TP]:synaptics_config_updater: Device config ID = 4d31763200180000000000000000000000000000000000000000000000000000
[    3.941497] c3    256 [TP]:synaptics_config_updater: Start of write config process
[    3.944856] c0    426 logd.auditd: start
[    3.944901] c0    426 logd.klogd: 3944873828
[    3.946674] c0    426 random: nonblocking pool is initialized
[    3.994731] c2    256 [TP]: fwu_get_tw_vendor_v7: tw_vendor = 0x2
[    3.994748] c2    256 [TP]:synaptics_config_updater: Image config ID = 4d31763200180000000000000000000000000000000000000000000000000000
[    3.994754] c2    256 [TP]:synaptics_config_updater: config_size = 2048
[    3.994761] c2    256 [TP]: synaptics_config_updater: crc_cksum = 66A6880E
[    3.996426] c2    256 [TP]: crc_comparison_v7: config_crc = 66A6880E, flash_crc = 66A6880E
[    3.996432] c2    256 [TP]: synaptics_config_updater: No need to update
[    3.996443] c2    256 [TP]:synaptics_rmi4_reset_device from synaptics_config_updater+0x748/0xa50, rebuild = 0
[    3.997122] c0    426 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    3.997132] c0    426 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[    3.997146] c0    426 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[    3.997157] c0    426 ->action():           (null)
[    3.997162] c0    426    IRQ_NOPROBE set
[    3.997168] c0    426  IRQ_NOREQUEST set
[    3.997173] c0    426   IRQ_NOTHREAD set
[    4.024822] c2    256 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 1439 max y = 2559 Rx: 17 Tx: 30
[    4.025469] c2    256 [TP]synaptics_rmi4_f12_init:Wakeup Gesture range (0,0) -> (1439,2559)
[    4.025723] c2    256 [TP]:synaptics_rmi4_f12_init report data init done
[    4.033585] c2    256 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2433782
[    4.034531] c2    256 [TP]:synaptics_rmi4_query_device: config_version: 4d31763200180000000000000000000000000000000000000000000000000000
[    4.040356] c2    256 [TP]:synaptics_config_updater: End of write config process
[    4.040364] c2    256 [TP]: synaptics_config_updater end
[    4.126586] c1    251 FUSB platform_notify_pd_contract: Contract=[0], typec_state(0x4), pd_state(0x1b)
[    4.153244] c1    350 SMBCHG: src_detect_handler:  chip->usb_present = 1 usb_present = 0 src_detect = 0 hvdcp_3_det_ignore_uv=0
[    4.153257] c1    350 SMBCHG: handle_usb_removal: triggered
[    4.153266] c1    350 SMBCHG: smbchg_change_usb_supply_type: Type 0: setting mA = 1100
[    4.153288] c1    350 SMBCHG: usb_icl: 0 voting for 1100 - on
[    4.153296] c1    350 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1100
[    4.153302] c1    350 SMBCHG: usb_suspend: 2 voting for 0 - off
[    4.153347] c1    350 SMBCHG: smbchg_set_usb_current_max: override_usb_current=0 current_ma set to 500
[    4.153446] c1    350 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
[    4.153465] c1    350 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    4.153484] c1    350 SMBCHG: usb_icl: 0 voting for 1100 - off
[    4.153582] c1    350 dwc3_msm_power_set_property_usb: delay 500ms to confirm disconnect or pr_swap
[    4.153614] c1    350 SMB1351 smb1351_parallel_set_chg_present: set slave present = 1 -> 0
[    4.153621] c1    350 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 1 suspended_status = 4 -> 20
[    4.153851] c1    335 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.153930] c1    335 SMBCHG: usb_icl: 0 voting for 0 - on
[    4.153942] c1    335 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
[    4.153954] c1    335 SMBCHG: usb_suspend: 2 voting for 0 - on
[    4.154046] c1    335 SMBCHG: smbchg_set_usb_current_max: usb type = 0 current set to 0 mA
[    4.154075] c1    350 SMBCHG: usb_icl: 4 voting for 0 - off
[    4.154082] c1    350 SMBCHG: usb_icl: 5 voting for 0 - off
[    4.154088] c1    350 SMBCHG: hwaicl_short_deglitch: 1 voting for 0 - off
[    4.154196] c1    335 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.154639] c1    359 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.154651] c1    359 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.168723] c0    348 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x01 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 560700
[    4.177137] c3      1 init: Starting service 'qseecomd'...
[    4.177703] c3      1 init: Starting service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)'...
[    4.230138] c2    435 capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
[    4.244617] c0    433 type=1400 audit(13234144.923:5): avc: denied { search } for pid=437 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.301386] c2      1 init: Service 'exec 1 (/system/bin/init.qcom.qseecomd.sh)' (pid 436) exited with status 0
[    4.301718] c2      1 init: Starting service 'flash-nanohub-fw'...
[    4.302427] c2      1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
[    4.302762] c2      1 init: Starting service 'exec 2 (/system/bin/recovery-refresh)'...
[    4.313014] c2      1 init: Service 'exec 2 (/system/bin/recovery-refresh)' (pid 450) exited with status 254
[    4.314376] c2      1 init: (Loading properties from /system/build.prop took 0.00s.)
[    4.314824] c2      1 init: (Loading properties from /vendor/build.prop took 0.00s.)
[    4.314853] c2      1 init: (Loading properties from /factory/factory.prop took 0.00s.)
[    4.314982] c2      1 init: /recovery not specified in fstab
[    4.317670] c2      1 subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008ea00000 to 0x0000000090400000
[    4.389658] c0    433 type=1400 audit(13234145.066:6): avc: denied { search } for pid=448 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.390143] c0    433 type=1400 audit(13234145.066:7): avc: denied { search } for pid=448 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.391370] c0    433 type=1400 audit(13234145.066:8): avc: denied { search } for pid=448 comm="nanoapp_cmd" name="firmware" dev="dm-0" ino=25 scontext=u:r:nanoapp_cmd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    4.633016] c3      1 subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset
[    4.645524] c0     49 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.645538] c0     49 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.645551] c0     49 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.645662] c0     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.645698] c0     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.645730] c0     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.645763] c0     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.645795] c0     49 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.650225] c1     49 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.652622] c1     49 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.652638] c1     49 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.652652] c1     49 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.652765] c1     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.652806] c1     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.652841] c1     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.652874] c1     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.652909] c1     49 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.653427] c1    335 dwc3_notify_vbus_work: pd_vbus_change = 0
[    4.653438] c1    335 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine
[    4.653782] c1    335 msm-dwc3 6a00000.ssusb: dwc3_msm_suspend unvote for TCXO buffer
[    4.653886] c1    335 msm-dwc3 6a00000.ssusb: DWC3 in low power mode
[    4.653903] c1    335 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[    4.653909] c1    335 android_work: [USB] android_work: sw_connected 0, connected 0 last_uevent 0
[    4.653919] c1    335 android_work: android_work: did not send uevent (0 0           (null))
[    4.654083] c1    359 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.654098] c1    359 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.654548] c0    323 subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up
[    4.654579] c0    323 subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received
[    4.654601] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.654640] c0    323 L-Notify: Generel: 7
[    4.654704] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.657584] c1    162 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500
[    4.657620] c1    162 SMBCHG: smbchg_is_parallel_usb_ok: Not in fast charge, skipping
[    4.657627] c1    162 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    4.657651] c1    350 SMBCHG: set_aicl_enable: Enable AICL...
[    4.657846] c1    162 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    4.657859] c1    162 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    4.657866] c1    162 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    4.657973] c1    162 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    4.662976] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000090400000 to 0x0000000090e00000
[    4.663780] c1     49 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
[    4.664782] c0      4 apr_tal:Q6 Is Up
[    4.667941] c2     49 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: schedule_delayed_work with card_det_work
[    4.668020] c2     49 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.668027] c2     49 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.668037] c2     49 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.668083] c2     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.668212] c2     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.668235] c2     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.668259] c2     49 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.668281] c2     49 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.670578] c2     49 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.762904] c1     49 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[    4.767244] c2    257 diag: In socket_open_client, socket not initialized for LPASS_CMD
[    4.767266] c2    257 diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
[    4.767342] c0    433 type=1400 audit(13234145.446:9): avc: denied { create } for pid=257 comm="kworker/u8:5" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    4.774384] c1    359 sps:BAM 0x0000000009184000 (va:0xffffff8004c00000) enabled: ver:0x19, number of pipes:31
[    4.774403] c1    359 sps:BAM 0x0000000009184000 is registered.
[    4.775865] c0    376 wcd9335-slim tasha-slim-pgd: Platform data from device tree
[    4.775961] c0    376 wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0
[    4.776011] c0    376 wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0
[    4.776042] c0    376 wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.776064] c0    376 wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
[    4.776085] c0    376 wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0
[    4.776096] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed
[    4.776105] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.776115] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.776139] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed
[    4.776150] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.776159] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.776167] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.776176] c0    376 wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed
[    4.776219] c0    376 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2
[    4.776856] c1    247 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.776871] c1    247 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.776882] c1    247 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.777050] c1    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.777099] c1    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.777134] c1    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.777171] c1    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.777218] c1    247 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.779747] c1    247 msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered
[    4.833553] c1    376 slimbus:1 laddr:0xcb, EAPC:0x1:0xa0
[    4.833688] c1    256 wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up, dev_up = 1
[    4.833827] c0    376 slimbus:1 laddr:0xca, EAPC:0x0:0xa0
[    4.834162] c1    376 wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0
[    4.834871] c1    376 wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2
[    4.834886] c1    376 wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
[    4.838026] c3      1 subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset
[    4.846732] c1    376 tasha_codec tasha_codec: tasha_probe: Tasha driver probe done
[    4.847455] c3    247 [AUD] snd_soc_msm8996: uart_gpios_init done
[    4.847465] c3    247 [AUD] snd_soc_msm8996: aud,uart-disable-mbhc is not set
[    4.847474] c3    247 msm8996-asoc-snd soc:sound-9335: property qcom,tfa9888-reset-gpio not detected in node /soc/sound-9335
[    4.847524] c3    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
[    4.847547] c3    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
[    4.847570] c3    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
[    4.847593] c3    247 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
[    4.847615] c3    247 [AUD] snd_soc_msm8996: htc_msm8996_parse_gpio: gpio rcv-amp-gpio-en no 31
[    4.850382] c3    247 tasha_codec tasha_codec: tasha_codec_probe()
[    4.867165] c1    247 [AUD] snd_soc_wcd_mbhc: [AUD][HS] register_attributes
[    4.867989] c1    247 wcd_mbhc_init: ret 0 --
[    4.868529] c1    247 tasha_codec tasha_codec: for cpe segments only will be dumped.
[    4.890762] c0    327 subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received
[    4.890778] c0    327 subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up
[    4.891256] c3      1 sysmon_send_event_no_qmi: Message sending failed -19
[    4.891271] c3      1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded
[    4.891594] c3      1 init: Starting service 'servicemanager'...
[    4.892111] c3      1 init: Starting service 'surfaceflinger'...
[    4.892493] c1    247 msm8996-asoc-snd soc:sound-9335: control 2:0:0:CPE AFE MAD Enable:0 is already present
[    4.892790] c3      1 init: Starting service 'audioserver'...
[    4.893321] c3      1 init: Starting service 'bootanim'...
[    4.897878] c1    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer
[    4.897894] c1    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer
[    4.897965] c1    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer
[    4.897973] c1    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer
[    4.905577] c2    493 EXT4-fs (sda35): Ignoring removed nomblk_io_submit option
[    4.907642] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX
[    4.907655] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3
[    4.913742] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer
[    4.913958] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer
[    4.914903] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.914915] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
[    4.916034] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX
[    4.916047] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX
[    4.919995] c2    493 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    4.920186] c2    493 SELinux: initialized (dev sda35, type ext4), uses xattr
[    4.920341] c2    493 fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
[    4.921813] c3    247 msm8996-asoc-snd soc:sound-9335: control 2:0:0:PRI_MI2S_RX Port Mixer SLIM_0_TX:0 is already present
[    4.921853] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: failed to add widget PRI_MI2S_RX Port Mixer dapm kcontrol PRI_MI2S_RX Port Mixer SLIM_0_TX: -16
[    4.923665] c2    493 fs_mgr: check_fs(): unmount(/data) succeeded
[    4.923819] c2    493 fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
[    4.984620] c3    247 msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AANC MUX has no paths
[    5.007751] c0     49 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service
[    5.008813] c3     43 diag: In socket_open_client, socket not initialized for SENSORS_CMD
[    5.011020] c3     49 diag: In diag_send_feature_mask_update, control channel is not open, p: 3, 0000000000000000
[    5.012048] c0    433 type=1400 audit(13234145.686:10): avc: denied { create } for pid=43 comm="kworker/u8:1" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    5.033723] c0    348 SMBCHG: usbin_uv_handler:  chip->usb_present = 0 rt_sts = 0x00 hvdcp_3_det_ignore_uv = 0 rerun_apsd_ignore_uv = 0 aicl = 1500, vbus = 5271240
[    5.034670] c1    162 SMBCHG: battchg_suspend: 1 voting for 0 - on
[    5.034686] c1    162 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.034697] c1    162 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.035057] c1    162 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.039117] c3    247 tfa98xx 7-0034: tfa98xx codec registered ()
[    5.040693] c3    409 tfa98xx 7-0034: Registered DSP instance with handle 0
[    5.042446] c3    247 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: no source widget found for SLIMBUS_2_RX
[    5.042459] c3    247 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-rx: ASoC: Failed to add route SLIMBUS_2_RX -> direct -> Slimbus2 Playback
[    5.042483] c3    247 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: no sink widget found for SLIMBUS_2_TX
[    5.042489] c3    247 msm-dai-q6-dev soc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-2-tx: ASoC: Failed to add route Slimbus2 Capture -> direct -> SLIMBUS_2_TX
[    5.054097] c3    247 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: ++
[    5.054424] c3    247 [AUD] snd_soc_msm8996: msm_htc_quat_mi2s_init: --
[    5.054503] c3    247 [AUD] snd_soc_msm8996: msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx
[    5.104084] c3    247 input: msm8996-tasha-marlin-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input7
[    5.104217] c3    247 input: msm8996-tasha-marlin-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input8
[    5.104264] c3    247 keychord: using input dev msm8996-tasha-marlin-snd-card Button Jack for fevent
[    5.107257] c2    251 [BATT][PD] Charger driver is not ready!
[    5.110147] c3    247 msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-marlin-snd-card registered
[    5.110158] c3    247 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe:  cancel_delayed_work with card_det_work
[    5.110172] c3    247 msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335
[    5.110178] c3    247 [AUD] htc-acoustic: acoustic_register_ops
[    5.110183] c3    247 [AUD] snd_soc_msm8996: msm8996_asoc_machine_probe: probe successfully
[    5.142971] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x1e)
[    5.142985] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.223926] c0    433 type=1400 audit(13234145.900:11): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.224983] c0    433 type=1400 audit(13234145.903:12): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.225540] c0    433 type=1400 audit(13234145.903:13): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.229639] c0    433 type=1400 audit(13234145.906:14): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.234326] c0    433 type=1400 audit(13234145.906:15): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.234886] c0    433 type=1400 audit(13234145.906:16): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.234978] c0    433 type=1400 audit(13234145.913:17): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.235206] c0    433 type=1400 audit(13234145.913:18): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.245673] c0    490 kgsl: _read_fw2_block_header: GPMU unknown header ID 6
[    5.250470] c0    490 cpr3_regulator_measure_aging: gfx: average quotient delta=5 (count=10)
[    5.250496] c0    490 cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=0 uV
[    5.275644] c0    490 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: loading from 0x0000000090e00000 to 0x0000000090e02000
[    5.294772] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.294787] c3    251 FUSB StateMachineTypeC: enter
[    5.297837] c2    251 [BATT][PD] Charger driver is not ready!
[    5.314509] c0    490 subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap_signed: Brought out of reset
[    5.321130] c3      6 devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information.
[    5.327172] c2    279 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id1-batterydata, id_ohm=33320, raw_min=0, raw_max=16000.
[    5.327187] c2    279 of_batterydata_get_best_profile: Find batterydata path: qcom,m1-id2-batterydata, id_ohm=33320, raw_min=27501, raw_max=40000.
[    5.327201] c2    279 FG: fg_batt_profile_init: batt_full_charge_criteria_ma = 345
[    5.327206] c2    279 FG: fg_batt_profile_init: batt_fcc_ma = 3400
[    5.327211] c2    279 FG: fg_batt_profile_init: batt_capacity_mah = 3450
[    5.327216] c2    279 FG: fg_batt_profile_init: fcc_half_capacity_ma = 1600
[    5.332087] c2    279 SMBCHG: battchg_suspend: 0 voting for 0 - off
[    5.335961] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x1e)
[    5.335971] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.337077] c2    279 FG: fg_batt_profile_init: Battery SOC: 59, V: 3835579uV
[    5.337083] c2    279 [BATT] Probe process: (1, 3)
[    5.337103] c2    279 [BATT] htc_battery_probe_process: catch name 2, set batt id=2, full_ma=345, fcc_ma=3400, capacity=3450, half_capacity_ma:1600, pd_is_limited:0, batt_eoc_current_ma:100
[    5.337108] c2    279 [BATT] Probe process done.
[    5.337176] c2    279 SMBCHG: battchg_suspend: 1 voting for 0 - off
[    5.337239] c1      6 [BATT] batt_worker: total_time since last batt update = 14316262990 ms.
[    5.337241] c2    279 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.337247] c2    279 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.338644] c0    433 type=1400 audit(13234145.913:19): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.339064] c2    516 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.339931] c1      6 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 0, g_overheat_55_sec = 0, g_total_level_raw = 0, g_batt_cycle_checksum = 0
[    5.339941] c1      6 [BATT] read_batt_cycle_info: Checksum error: reset battery cycle data.
[    5.339948] c1      6 [BATT] read_batt_cycle_info: g_batt_first_use_time = 13234146, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.339958] c1      6 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-06-03 04:09:06, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.339964] c1      6 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.339996] c1      6 [BATT] batt_check_consistent: magic_num=0x0, level_raw=59, store_soc=0, current_time:13234146, store_time=0, batt_temp=265, store_temp=0, consistent_flag=0 at 5339986936 (1970-06-03 04:09:06.021893844 UTC)
[    5.340006] c1      6 [BATT] pre_level=59,pre_raw_level=59,pre_five_digit=5,pre_chg_src=0
[    5.340013] c1      6 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:59, raw_level:59
[    5.340053] c1      6 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:59%
[    5.340060] c1      6 [BATT] write battery data: level:59, temp:265, time:13234146 at 5340050530 (1970-06-03 04:09:06.021960719 UTC)
[    5.340070] c1      6 ignore the fist time on boot.
[    5.340518] c1    359 SMBCHG: smbchg_cc_esr_wa_check: No inputs present, skipping
[    5.340537] c1    359 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    5.340545] c1    359 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.340635] c1    359 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    5.342865] c1      6 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=00,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=18mA
[    5.343033] c1      6 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,80,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1a,04,d8,41]
[    5.343045] c1      6 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,08,00,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,94,e0,00],MISC_CFG[FA:FF]=[00,05,b0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.346996] c1      6 [BATT] ID=2,level=59,level_raw=59,vol=3835mV,temp=265,current=787348uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5273mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=268,usb_overheat=0,level_accu=0 at 5346993187 (1970-06-03 04:09:06.028864106 UTC)
[    5.347017] c1      6 [BATT] Device is at booting stage at 5347008395 (1970-06-03 04:09:06.028917960 UTC)
[    5.390113] c3    247 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.392744] c2    247 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-06-03 04:09:06, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.392754] c2    247 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.392760] c2    247 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:59%
[    5.396541] c2    247 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=00,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=18mA
[    5.396721] c2    247 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,80,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1a,04,d8,41]
[    5.396731] c2    247 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,08,00,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,94,e0,00],MISC_CFG[FA:FF]=[00,05,b0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.399549] c2    247 [BATT] ID=2,level=59,level_raw=59,vol=3835mV,temp=265,current=787348uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5269mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=268,usb_overheat=0,level_accu=0 at 5399541160 (1970-06-03 04:09:06.081425361 UTC)
[    5.399559] c2    247 [BATT] Device is at booting stage at 5399549025 (1970-06-03 04:09:06.081461142 UTC)
[    5.443407] c3    247 [BATT] batt_worker: total_time since last batt update = 53 ms.
[    5.446079] c3    247 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-06-03 04:09:06, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.446103] c3    247 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.446110] c3    247 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:59%
[    5.449046] c3    247 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=00,0x1340=12,0x1608=00,0x1610=00,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=0,wake_reason=0,smb_curr=17mA
[    5.449240] c3    247 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,80,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[1e,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1a,04,d8,41]
[    5.449252] c3    247 [BATT][SMBCHG] USB_STS[07:0B]=[0d,01,08,00,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,07,04,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,94,e0,00],MISC_CFG[FA:FF]=[00,05,b0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.452229] c3    247 [BATT] ID=2,level=59,level_raw=59,vol=3835mV,temp=265,current=787348uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=5269mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1500mA,htc_ext=0x00,usb_temp=268,usb_overheat=0,level_accu=0 at 5452222884 (1970-06-03 04:09:06.134104220 UTC)
[    5.452241] c3    247 [BATT] Device is at booting stage at 5452231374 (1970-06-03 04:09:06.134143491 UTC)
[    5.467530] c0    433 type=1400 audit(13234145.920:20): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467594] c0    433 type=1400 audit(13234145.920:21): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467647] c0    433 type=1400 audit(13234145.920:22): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467702] c0    433 type=1400 audit(13234145.950:23): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467754] c0    433 type=1400 audit(13234145.950:24): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467917] c0    433 type=1400 audit(13234145.950:25): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.467979] c0    433 type=1400 audit(13234145.983:26): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.468029] c0    433 type=1400 audit(13234145.983:27): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.468078] c0    433 type=1400 audit(13234145.983:28): avc: denied { search } for pid=490 comm="surfaceflinger" name="firmware" dev="dm-0" ino=25 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    5.468128] c0    433 type=1400 audit(13234146.123:29): avc: denied { read write } for pid=490 comm="surfaceflinger" name="diag" dev="tmpfs" ino=15131 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    5.486150] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.486165] c2    251 FUSB StateMachineTypeC: enter
[    5.489065] c2    251 [BATT][PD] Set ID(0), pd_is_limited:0, List: [0]:15W(5000mV-3000mA)
[    5.535256] c3    251 FUSB platform_notify_pd_contract: Contract=[1], typec_state(0x4), pd_state(0x22)
[    5.535268] c3    251 dwc3_pd_vbus_ctrl: set pd vbus flag to 0
[    5.547496] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.547510] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.547582] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.547589] c3    251 FUSB StateMachineTypeC: enter
[    5.558262] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.558274] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.564251] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.564265] c3    251 FUSB StateMachineTypeC: enter
[    5.575646] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.575659] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.575708] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.575715] c3    251 FUSB StateMachineTypeC: enter
[    5.586732] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.586740] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.632468] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.632477] c3    251 FUSB StateMachineTypeC: enter
[    5.634332] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.634338] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.634387] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.634392] c3    251 FUSB StateMachineTypeC: enter
[    5.636296] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.636302] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.636349] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.636354] c3    251 FUSB StateMachineTypeC: enter
[    5.638193] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.638198] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.638245] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.638250] c3    251 FUSB StateMachineTypeC: enter
[    5.640141] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.640147] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.640190] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.640195] c3    251 FUSB StateMachineTypeC: enter
[    5.642089] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.642095] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.642138] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.642144] c3    251 FUSB StateMachineTypeC: enter
[    5.644022] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.644028] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.644080] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.644085] c3    251 FUSB StateMachineTypeC: enter
[    5.645992] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.645998] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.646041] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.646046] c3    251 FUSB StateMachineTypeC: enter
[    5.647893] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.647899] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.647958] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.647963] c3    251 FUSB StateMachineTypeC: enter
[    5.649848] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.649854] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.649900] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.649905] c3    251 FUSB StateMachineTypeC: enter
[    5.651750] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.651755] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.651811] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.651815] c3    251 FUSB StateMachineTypeC: enter
[    5.653716] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.653721] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.653772] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.653777] c3    251 FUSB StateMachineTypeC: enter
[    5.655657] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.655662] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.655707] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.655712] c3    251 FUSB StateMachineTypeC: enter
[    5.657607] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.657612] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.657666] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.657671] c3    251 FUSB StateMachineTypeC: enter
[    5.659543] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.659548] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.659591] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.659596] c3    251 FUSB StateMachineTypeC: enter
[    5.661450] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.661456] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.661511] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.661516] c3    251 FUSB StateMachineTypeC: enter
[    5.663363] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.663368] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.663414] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.663420] c3    251 FUSB StateMachineTypeC: enter
[    5.665266] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.665272] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.665325] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.665330] c3    251 FUSB StateMachineTypeC: enter
[    5.667208] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.667213] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.667256] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.667261] c3    251 FUSB StateMachineTypeC: enter
[    5.669107] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.669112] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.669160] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.669164] c3    251 FUSB StateMachineTypeC: enter
[    5.671064] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.671069] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.671125] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.671130] c3    251 FUSB StateMachineTypeC: enter
[    5.673007] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.673012] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.673054] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.673059] c3    251 FUSB StateMachineTypeC: enter
[    5.674917] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.674922] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.674978] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.674983] c3    251 FUSB StateMachineTypeC: enter
[    5.676857] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.676863] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.676905] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.676910] c3    251 FUSB StateMachineTypeC: enter
[    5.678759] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.678764] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.678819] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.678824] c3    251 FUSB StateMachineTypeC: enter
[    5.680695] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.680701] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.680766] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.680771] c3    251 FUSB StateMachineTypeC: enter
[    5.682620] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.682625] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.682675] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.682679] c3    251 FUSB StateMachineTypeC: enter
[    5.684551] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.684556] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.684613] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.684618] c3    251 FUSB StateMachineTypeC: enter
[    5.686485] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.686490] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.686533] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.686538] c3    251 FUSB StateMachineTypeC: enter
[    5.688411] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.688416] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.688471] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.688476] c3    251 FUSB StateMachineTypeC: enter
[    5.690396] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.690402] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.690467] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.690472] c3    251 FUSB StateMachineTypeC: enter
[    5.692318] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.692323] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.692379] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.692383] c3    251 FUSB StateMachineTypeC: enter
[    5.694262] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.694267] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.694311] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.694316] c3    251 FUSB StateMachineTypeC: enter
[    5.696161] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.696166] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.696215] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.696219] c3    251 FUSB StateMachineTypeC: enter
[    5.698117] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.698122] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.698176] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.698181] c3    251 FUSB StateMachineTypeC: enter
[    5.700030] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.700035] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.700080] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.700085] c3    251 FUSB StateMachineTypeC: enter
[    5.701960] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.701965] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.702022] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.702026] c3    251 FUSB StateMachineTypeC: enter
[    5.703924] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.703930] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.703993] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.703998] c3    251 FUSB StateMachineTypeC: enter
[    5.705843] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.705848] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.705903] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.705908] c3    251 FUSB StateMachineTypeC: enter
[    5.707809] c3    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.707815] c3    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.707863] c3    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.707869] c3    251 FUSB StateMachineTypeC: enter
[    5.709768] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.709776] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.709825] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.709832] c2    251 FUSB StateMachineTypeC: enter
[    5.711757] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.711763] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.711814] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.711819] c2    251 FUSB StateMachineTypeC: enter
[    5.713729] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.713735] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.713790] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.713795] c2    251 FUSB StateMachineTypeC: enter
[    5.715691] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.715697] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.715749] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.715754] c2    251 FUSB StateMachineTypeC: enter
[    5.717670] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.717675] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.717725] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.717731] c2    251 FUSB StateMachineTypeC: enter
[    5.719608] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.719614] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.719665] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.719671] c2    251 FUSB StateMachineTypeC: enter
[    5.721589] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.721595] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.721644] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.721650] c2    251 FUSB StateMachineTypeC: enter
[    5.723520] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.723526] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.723572] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.723577] c2    251 FUSB StateMachineTypeC: enter
[    5.725479] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.725485] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.725537] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.725542] c2    251 FUSB StateMachineTypeC: enter
[    5.727469] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.727475] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.727522] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.727527] c2    251 FUSB StateMachineTypeC: enter
[    5.729416] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.729422] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.729476] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.729481] c2    251 FUSB StateMachineTypeC: enter
[    5.731365] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.731371] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.731420] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.731425] c2    251 FUSB StateMachineTypeC: enter
[    5.733294] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.733300] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.733346] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.733365] c2    251 FUSB StateMachineTypeC: enter
[    5.735284] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.735290] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.735339] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.735345] c2    251 FUSB StateMachineTypeC: enter
[    5.737259] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.737264] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.737310] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.737315] c2    251 FUSB StateMachineTypeC: enter
[    5.739201] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.739207] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.739249] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.739254] c2    251 FUSB StateMachineTypeC: enter
[    5.741169] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.741174] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.741218] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.741224] c2    251 FUSB StateMachineTypeC: enter
[    5.743085] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.743091] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.743139] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.743144] c2    251 FUSB StateMachineTypeC: enter
[    5.745068] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.745073] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.745164] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.745169] c2    251 FUSB StateMachineTypeC: enter
[    5.747029] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.747035] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.747086] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.747091] c2    251 FUSB StateMachineTypeC: enter
[    5.748957] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.748962] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.749013] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.749018] c2    251 FUSB StateMachineTypeC: enter
[    5.750918] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.750924] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.750973] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.750978] c2    251 FUSB StateMachineTypeC: enter
[    5.752836] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.752841] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.752887] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.752892] c2    251 FUSB StateMachineTypeC: enter
[    5.754794] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.754799] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.754850] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.754855] c2    251 FUSB StateMachineTypeC: enter
[    5.756739] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.756744] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.756789] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.756794] c2    251 FUSB StateMachineTypeC: enter
[    5.758700] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.758705] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.758786] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.758791] c2    251 FUSB StateMachineTypeC: enter
[    5.760696] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.760702] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.760754] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.760760] c2    251 FUSB StateMachineTypeC: enter
[    5.762720] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.762726] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.762771] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.762776] c2    251 FUSB StateMachineTypeC: enter
[    5.764695] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.764701] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.764750] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.764756] c2    251 FUSB StateMachineTypeC: enter
[    5.766668] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.766674] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.766754] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.766760] c2    251 FUSB StateMachineTypeC: enter
[    5.768674] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.768680] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.768728] c2    251 FUSB  [_fusb_isr_intn]: FUSB-interrupt triggered ++
[    5.768733] c2    251 FUSB StateMachineTypeC: enter
[    5.770655] c2    251 FUSB StateMachineTypeC: leave typec_state(0x4), pd_state=(0x22)
[    5.770662] c2    251 FUSB [_fusb_isr_intn]: FUSB-interrupt handled ++
[    5.880717] c1    350 SMBCHG: src_detect_handler:  chip->usb_present = 0 usb_present = 1 src_detect = 1 hvdcp_3_det_ignore_uv=0
[    5.880781] c1    350 SMBCHG: handle_usb_insertion: triggered
[    5.880820] c1    350 SMBCHG: handle_usb_insertion: inserted type = 9 (USB_PD)
[    5.880827] c1    350 SMBCHG: smbchg_change_usb_supply_type: Type 9: setting mA = 3000
[    5.880836] c1    350 SMBCHG: usb_icl: 0 voting for 3000 - on
[    5.880843] c1    350 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 3000
[    5.880849] c1    350 SMBCHG: usb_suspend: 2 voting for 0 - off
[    5.880979] c0    356 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(13234143865) diff(349241977) count_same_dischg(0) limit_iusb(0)
[    5.880995] c1    350 SMBCHG: smbchg_set_usb_current_max: usb type = 9 current set to 3000 mA
[    5.881016] c1    350 SMBCHG: set_aicl_enable: Disable AICL...
[    5.881066] c1    350 SMBCHG: smbchg_rerun_aicl: PD charger donot rerun AICL.
[    5.881073] c1    350 SMBCHG: smbchg_stay_awake: staying awake: 0x01 (bit 1)
[    5.881097] c1    350 msm-dwc3 6a00000.ssusb: dwc3_msm_power_set_property_usb TCXO enabled
[    5.881202] c1    350 SMBCHG: set_aicl_enable: Disable AICL...
[    5.881257] c1    350 SMB1351 smb1351_parallel_set_chg_present: set slave present = 0 -> 1
[    5.881480] c1    162 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.882204] c1    162 [BATT] htc_batt_stats_1.1: begin charging: level=59, at=1970-06-03 04:09:06 UTC
[    5.882227] c1    162 [BATT] charger_exist_lock Lock at 5882221313 (1970-06-03 04:09:06.564128378 UTC)
[    5.882240] c2     43 [BATT] batt_worker: total_time since last batt update = 436 ms.
[    5.883808] c1    350 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 1 suspended_status = 20 -> 20
[    5.884120] c1    350 SMB1351 smb1351_usb_suspend: reason = 16 requested_suspend = 0 suspended_status = 20 -> 4
[    5.884830] c1     43 [BATT] set_batt_psy_property. value(1) prop(89) at 5884825376 (1970-06-03 04:09:06.566726555 UTC)
[    5.884850] c1     43 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-06-03 04:09:06, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.884856] c1     43 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.884864] c1     43 [BATT] batt_level_adjust: pre_level=59, new_level=59, level would use raw level!
[    5.884873] c1     43 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
[    5.884935] c1     43 [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 5884926417 (1970-06-03 04:09:06.566834315 UTC)
[    5.884946] c1     43 [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 5884936990 (1970-06-03 04:09:06.566846868 UTC)
[    5.884955] c1     43 [BATT] set_batt_psy_property. value(3400000) prop(32) at 5884945792 (1970-06-03 04:09:06.566856763 UTC)
[    5.884964] c1     43 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
[    5.884971] c1     43 SMBCHG: fcc: 1 voting for 3400 - on
[    5.884978] c1     43 SMBCHG: smbchg_set_fastchg_current_raw: skipping fastchg current request: 3000
[    5.884986] c1     43 [BATT] set charging_enable(1) at 5884977042 (1970-06-03 04:09:06.566888378 UTC)
[    5.884995] c1     43 [BATT] set_batt_psy_property. value(1) prop(68) at 5884985792 (1970-06-03 04:09:06.566896920 UTC)
[    5.885004] c1     43 [BATT] set pwrsrc_enable(1) at 5884994542 (1970-06-03 04:09:06.566906034 UTC)
[    5.885012] c1     43 [BATT] set_batt_psy_property. value(1) prop(69) at 5885002928 (1970-06-03 04:09:06.566914003 UTC)
[    5.885994] c1     13 [BATT] chg_full_check_worker: vol:3835, curr=787, is_full_count=0, is_full=0 at 5885989126 (1970-06-03 04:09:06.567888795 UTC)
[    5.888889] c1     43 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=07,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=1,wake_reason=1,smb_curr=17mA
[    5.889060] c1     43 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,89,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1a,04,d8,41]
[    5.889071] c1     43 [BATT][SMBCHG] USB_STS[07:0B]=[1f,02,02,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,1f,00,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,94,e0,00],MISC_CFG[FA:FF]=[00,05,b0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.892050] c1     43 [BATT] cable_impedance: 0, R_cable_impedance: 0, aicl_result: 0 at 5892045689 (1970-06-03 04:09:06.573947597 UTC)
[    5.892112] c1     43 [BATT] ID=2,level=59,level_raw=59,vol=3835mV,temp=265,current=787348uA,chg_name=PD5V_3A,chg_src=2,chg_en=2,health=1,overload=0,duration=0min,vbus=4991mV,max_iusb=3000mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=3000mA,htc_ext=0x00,usb_temp=268,usb_overheat=0,level_accu=0 at 5892103553 (1970-06-03 04:09:06.573995254 UTC)
[    5.892122] c1     43 [BATT] Device is at booting stage at 5892112303 (1970-06-03 04:09:06.574023847 UTC)
[    5.920094] c1    529 dwc3_notify_vbus_work: pd_vbus_change = 0
[    5.920108] c1    529 dwc3_notify_vbus_work: maybe cable out or SINK first connect, resume state machine
[    5.920158] c1    529 [USB] b_sess_vld, chg_type=5, PolicyIsDFP=0, dwc3_vbus_boost=0
[    5.920177] c1    529 msm-dwc3 6a00000.ssusb: dwc3_msm_resume xo_vote_for_charger = 1
[    5.922391] c1    529 [USB] USB3_QSERDES_TX_DRV_LVL = 0x13
[    5.923471] c1    529 msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode
[    5.929556] c1    493 e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    5.929556] c1    493
[    5.929608] c1    493 e2fsck: Pass 1: Checking inodes, blocks, and sizes
[    5.929608] c1    493
[    5.929621] c1    493 e2fsck: Pass 2: Checking directory structure
[    5.929621] c1    493
[    5.929633] c1    493 e2fsck: Pass 3: Checking directory connectivity
[    5.929633] c1    493
[    5.929644] c1    493 e2fsck: Pass 4: Checking reference counts
[    5.929644] c1    493
[    5.929656] c1    493 e2fsck: Pass 5: Checking group summary information
[    5.929656] c1    493
[    5.929668] c1    493 e2fsck: /dev/block/bootdevice/by-name/userdata: 3108/7487488 files (7.6% non-contiguous), 869919/29939712 blocks
[    5.929668] c1    493
[    5.933932] c1    335 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.934052] c1    335 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    5.939430] c3    493 EXT4-fs (sda35): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[    5.939457] c3    493 SELinux: initialized (dev sda35, type ext4), uses xattr
[    5.939518] c3    493 fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
[    5.939552] c3    493 fs_mgr: /data is file encrypted
[    5.940752] c2      1 init: Starting service 'debuggerd'...
[    5.941651] c3      1 init: Starting service 'debuggerd64'...
[    5.942121] c0    490 [TP]:synaptics_rmi4_fb_notifier_cb, event = 16 blank = 0
[    5.942123] c3      1 init: Starting service 'vold'...
[    5.943384] c0    490 [TP]: [ERR]:synaptics_rmi4_irq_enable: Interrupt already enabled
[    5.943434] c0    490 [BATT] fb_notifier_callback-> display is On
[    5.943435] c3     43 [BATT] batt_worker: total_time since last batt update = 63 ms.
[    5.945983] c3     43 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 1970-06-03 04:09:06, g_overheat_55_sec = 0, g_total_level_raw = 0
[    5.945993] c3     43 [BATT] calculate_batt_cycle_info: save batt cycle data every 50%
[    5.945999] c3     43 [BATT] batt_level_adjust: pre_level=59, new_level=59, level would use raw level!
[    5.946011] c3     43 [BATT] ibat_max=3400000,ibat_new=3400000,prev_vol_limit=0,prev_ibat_health=1,chg_limit_reason=0,prev_screen_warm=0,prev_screen_hot=0,is_over_ibat=0,htc_batt_info.state=0x0 at 5946002934 (1970-06-03 04:09:06.627910155 UTC)
[    5.946024] c3     43 [BATT] set ibat max(3400000),ibat_total=3000000[3000000,0],ibat_total_new=3400000,is_parallel=0 at 5946016163 (1970-06-03 04:09:06.627924634 UTC)
[    5.946034] c3     43 [BATT] set_batt_psy_property. value(3400000) prop(32) at 5946024132 (1970-06-03 04:09:06.627935780 UTC)
[    5.946042] c3     43 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 3400
[    5.949824] c3     43 [BATT][SMBCHG] 0x1010=00,0x1210=00,0x1242=00,0x1310=04,0x1340=07,0x1608=10,0x1610=01,cc=0uAh,warm_temp=470,cool_temp=100,pmic=rev1.1,sink_current=3,pd_chgr=1,wake_reason=1,smb_curr=18mA
[    5.949990] c3     43 [BATT][SMBCHG] CHG_STS[0B:0F]=[02,2e,9f,89,00],CHG_CFG[F0:F4]=[0f,04,1f,00,2e],CHG_CFG[F5:F9]=[00,00,01,02,02],CHG_CFG[FA:FF]=[1c,47,42,08,00,08],BAT_CFG[F0:F5]=[0f,04,06,c5,00,03],BAT_CFG[F6:FB]=[03,3b,1a,04,d8,41]
[    5.950001] c3     43 [BATT][SMBCHG] USB_STS[07:0B]=[1f,02,02,08,08],USB_STS[0C:0F]=[00,08,0f,ff],USB_CFG[F0:F5]=[0f,02,1f,00,11,ab],MISC_CFG[F0:F4]=[0f,00,12,06,25],MISC_CFG[F5:F9]=[38,18,94,e0,00],MISC_CFG[FA:FF]=[00,05,b0,05,f0,02],SMB1351[00:06]=[02,1c,87,ef,08,11,6b,],[32]=[00]
[    5.952751] c3     43 [BATT] cable_impedance: 0, R_cable_impedance: 0, aicl_result: 0 at 5952741997 (1970-06-03 04:09:06.634652031 UTC)
[    5.952793] c3     43 [BATT] ID=2,level=59,level_raw=59,vol=3835mV,temp=265,current=787348uA,chg_name=PD5V_3A,chg_src=2,chg_en=2,health=1,overload=0,duration=0min,vbus=5057mV,max_iusb=3000mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=3000mA,htc_ext=0x00,usb_temp=268,usb_overheat=0,level_accu=0 at 5952783664 (1970-06-03 04:09:06.634678541 UTC)
[    5.952801] c3     43 [BATT] Device is at booting stage at 5952790955 (1970-06-03 04:09:06.634703176 UTC)
[    6.227152] c0    341 SMBCHG: fastchg_handler: p2f triggered
[    6.227182] c0    341 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    6.386853] c1    359 SMBCHG: smbchg_parallel_usb_en_work: AICL at 3000
[    6.387421] c1    359 SMBCHG: smbchg_parallel_usb_enable: Attempting to enable parallel charger
[    6.388368] c1    359 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 0 suspended_status = 4 -> 0
[    6.389734] c1    359 SMBCHG: smbchg_parallel_usb_enable: New Total USB current = 3000[1500, 1500]
[    6.389745] c1    359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1500
[    6.389853] c1    359 SMBCHG: smbchg_set_usb_current_max: usb type = 9 current set to 1500 mA
[    6.390556] c1    359 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 1800, set to 1800
[    6.390567] c1    359 SMBCHG: smbchg_parallel_usb_enable: FCC = 3400[1800, 1600]
[    6.390574] c1    359 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 1)
[    6.547380] c2      1 init: Not bootcharting.
[    6.548644] c3     83 get_ice_device_from_storage_type: found ice device ffffffc0f6bd5a00
[    6.549669] c3     83 get_ice_device_from_storage_type: found ice device ffffffc0f6bd5a00
[    6.697673] c2      1 init: Starting service 'exec 3 (/system/bin/tzdatacheck)'...
[    6.710743] c2      1 init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 553) exited with status 0
[    6.712683] c2      1 init: Service 'qseecomd' is being killed...
[    6.713964] c2      1 init: Service 'qseecomd' (pid 435) killed by signal 9
[    6.713983] c2      1 init: Service 'qseecomd' (pid 435) killing any children in process group
[    6.714660] c2      1 init: Untracked pid 437 killed by signal 9
[    6.716745] c2      1 sps:debugfs:input BAM physical address:0x7544000
[    6.716759] c2      1 sps:no dump option is chosen yet.init: Starting service 'exec 4 (/system/bin/otapreopt_slot)'...
[    6.761307] c3      1 init: Service 'exec 4 (/system/bin/otapreopt_slot)' (pid 554) exited with status 0
[    6.762196] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/mips: No such file or directory.
[    6.762238] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/mips64: No such file or directory.
[    6.762276] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/x86: No such file or directory.
[    6.762312] c3      1 init: SELinux:  Could not stat /data/dalvik-cache/x86_64: No such file or directory.
[    6.763060] c3      1 init: Starting service 'exec 5 (/system/bin/recovery-persist)'...
[    6.769164] c3      1 init: Service 'exec 5 (/system/bin/recovery-persist)' (pid 557) exited with status 0
[    6.769456] c3      1 init: Starting service 'exec 6 (/system/bin/bootstat)'...
[    6.777896] c3      1 init: Service 'exec 6 (/system/bin/bootstat)' (pid 558) exited with status 0
[    6.824358] c0    491 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    6.834758] c0    491 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    6.835001] c0    491 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    6.835237] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.835249] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    6.835444] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.835454] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    6.835679] c0    491 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    6.835929] c0    491 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    6.836219] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.836229] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    6.836482] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    6.836493] c0    491 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    6.842070] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.842979] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.843798] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.844553] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.846636] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.847211] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.848487] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.850406] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.852527] c0    491 msm_pcm_volume_ctl_get substream runtime not found
[    6.852928] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.854156] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.855754] c2      1 init: Starting service 'logd-reinit'...
[    6.856171] c2      1 init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
[    6.856183] c2      1 init: write: cannot expand '${persist.sys.ssr.enable_debug}'
[    6.856199] c2      1 init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
[    6.856209] c2      1 init: write: cannot expand '${persist.sys.mba_boot_timeout}'
[    6.856224] c2      1 init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
[    6.856233] c2      1 init: write: cannot expand '${persist.sys.modem_auth_timeout}'
[    6.856247] c2      1 init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
[    6.856256] c2      1 init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
[    6.856776] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.858103] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.858277] c2      1 init: Starting service 'healthd'...
[    6.858783] c2      1 init: Starting service 'per_mgr'...
[    6.859209] c2      1 init: Starting service 'qseecomd'...
[    6.860608] c2      1 init: Starting service 'irsc_util'...
[    6.862163] c2      1 init: Starting service 'rmt_storage'...
[    6.863842] c2      1 init: Starting service 'msm_irqbalance'...
[    6.864445] c2      1 init: Starting service 'lmkd'...
[    6.865090] c2      1 init: Starting service 'exec 7 (/system/bin/init.power.sh)'...
[    6.868147] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.868350] c3    560 healthd: Unknown power supply type 'Wipower'
[    6.868408] c3    560 healthd: Unknown power supply type 'BMS'
[    6.868455] c3    560 healthd: Unknown power supply type 'BMS'
[    6.868577] c3    560 healthd: Unknown power supply type 'USB_Parallel'
[    6.868628] c3    560 healthd: Unknown power supply type 'BMS'
[    6.868949] c3    560 healthd: BatteryFullChargePath not found
[    6.868960] c3    560 healthd: BatteryCycleCountPath not found
[    6.869760] c0    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    6.878176] c2      1 init: Service 'irsc_util' (pid 563) exited with status 0
[    6.883649] c3    567 msm_thermal:store_cc_enabled Core control disabled
[    6.893526] c1    359 SMBCHG: smbchg_parallel_usb_en_work: AICL at 1500
[    6.895090] c1    359 SMBCHG: smbchg_parallel_usb_enable: Attempting to enable parallel charger
[    6.896186] c1    359 SMB1351 smb1351_usb_suspend: reason = 4 requested_suspend = 0 suspended_status = 0 -> 0
[    6.897000] c1    359 SMBCHG: smbchg_parallel_usb_enable: New Total USB current = 3000[1500, 1500]
[    6.897016] c1    359 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 1500
[    6.897132] c1    359 SMBCHG: smbchg_set_usb_current_max: usb type = 9 current set to 1500 mA
[    6.898850] c1    359 SMBCHG: smbchg_set_fastchg_current_raw: skipping fastchg current request: 1800
[    6.898971] c1    359 SMBCHG: smbchg_parallel_usb_enable: FCC = 3400[1800, 1600]
[    6.899178] c0    491 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    6.899203] c0    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    6.899215] c0    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    6.899226] c0    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    6.899238] c0    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    6.900811] c0    491 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    6.900857] c0    491 [AUD] snd_soc_msm8996: msm_adaptivesound_enable_get: adaptivesound_enable = 0 0x0
[    6.901308] c0    491 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    6.901347] c0    491 [AUD] snd_soc_msm8996: msm_onedotone_get: htc_onedotone_enable = 0 0x0
[    6.906410] c3    567 msm_thermal:store_cc_enabled Core control enabled
[    6.906502] c3    567 msm_thermal:update_offline_cores cpus_offlined: 0
[    6.906564] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906597] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906633] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906662] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906826] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906858] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906893] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.906920] c3    567 msm_thermal:sensor_mgr_set_threshold zone:0 Invalid trip:0
[    6.928243] c2      1 init: Service 'exec 7 (/system/bin/init.power.sh)' (pid 567) exited with status 0
[    6.928618] c2      1 init: Starting service 'exec 8 (/system/bin/init.mid.sh)'...
[    6.937817] c0    433 type=1400 audit(13234147.590:30): avc: denied { search } for pid=570 comm="qseecomd" name="firmware" dev="dm-0" ino=25 scontext=u:r:tee:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    6.961394] c2      1 init: Service 'logd-reinit' (pid 559) exited with status 0
[    6.965237] c0    427 logd.daemon: reinit
[    6.978420] c3      1 init: Service 'exec 8 (/system/bin/init.mid.sh)' (pid 588) exited with status 0
[    6.979808] c3      1 init: Starting service 'exec 9 (/system/bin/init.foreground.sh)'...
[    6.982053] c1    433 type=1400 audit(13234147.593:31): avc: granted { net_bind_service } for pid=564 comm="rmt_storage" capability=10 scontext=u:r:rmt:s0 tcontext=u:r:rmt:s0 tclass=capability
[    7.042678] c3      1 init: Service 'exec 9 (/system/bin/init.foreground.sh)' (pid 592) exited with status 0
[    7.043922] c3      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory
[    7.043953] c3      1 init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory
[    7.045517] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
[    7.045549] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
[    7.045574] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
[    7.045598] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
[    7.045621] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
[    7.045645] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
[    7.045668] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
[    7.045692] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
[    7.045715] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
[    7.045739] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
[    7.045763] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
[    7.045786] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
[    7.045810] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
[    7.045833] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
[    7.045856] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
[    7.045879] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
[    7.045903] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
[    7.045926] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
[    7.045949] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
[    7.045973] c3      1 init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
[    7.046672] c3      1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory
[    7.046938] c3      1 init: Starting service 'per_proxy'...
[    7.047348] c3      1 enable_store: android_usb: already disabled
[    7.047657] c3      1 init: Starting service 'adbd'...
[    7.055999] c3      1 init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory
[    7.056379] c3      1 init: Starting service 'exec 10 (/system/bin/update_verifier)'...
[    7.069468] c2    575 subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[    7.071412] c0    601 read descriptors
[    7.071433] c0    601 read strings
[    7.071463] c0    601 mtp_bind_config
[    7.072870] c2    575 IPA received MPSS BEFORE_POWERUP
[    7.073614] c3    575 ipa ipa2_uc_state_check:301 uC is not loaded
[    7.073645] c3    575 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    7.075557] c0    575 IPA BEFORE_POWERUP handling is complete
[    7.077072] c0    575 pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008e9f0000
[    7.077644] c0    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850874
[    7.077644] c0    491
[    7.078299] c2      1 init: Service 'exec 10 (/system/bin/update_verifier)' (pid 597) exited with status 0
[    7.078379] c2      1 init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
[    7.078613] c2      1 init: Starting service 'thermal-engine'...
[    7.079126] c2      1 init: Starting service 'adsprpcd'...
[    7.079587] c2      1 init: Starting service 'imsqmidaemon'...
[    7.080128] c2      1 init: Starting service 'ssr_setup'...
[    7.080504] c0    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850875
[    7.080504] c0    491
[    7.080678] c2      1 init: Starting service 'port-bridge'...
[    7.081161] c2      1 init: Starting service 'netmgrd'...
[    7.081641] c2      1 init: Service qti does not have a SELinux domain defined.
[    7.081807] c2      1 init: Starting service 'perfd'...
[    7.082324] c2      1 init: Starting service 'zygote'...
[    7.082812] c2      1 init: Starting service 'zygote_secondary'...
[    7.083347] c2      1 init: Starting service 'cameraserver'...
[    7.083914] c2      1 init: Starting service 'drm'...
[    7.083977] c0    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850876
[    7.083977] c0    491
[    7.084455] c2      1 init: Starting service 'installd'...
[    7.084999] c2      1 init: Starting service 'keystore'...
[    7.085566] c2      1 init: Starting service 'mediacodec'...
[    7.086198] c2      1 init: Starting service 'mediadrm'...
[    7.087524] c3    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850877
[    7.087524] c3    491
[    7.088280] c2      1 init: Starting service 'mediaextractor'...
[    7.088845] c3    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850878
[    7.088845] c3    491
[    7.092960] c3    605 'opened /dev/adsprpc-smd c 215 0'
[    7.093031] c2      1 init: Starting service 'media'...
[    7.093722] c2      1 init: Starting service 'netd'...
[    7.094260] c2      1 init: Starting service 'ril-daemon'...
[    7.094813] c2      1 init: Starting service 'fingerprintd'...
[    7.095317] c2      1 init: Starting service 'time_daemon'...
[    7.095830] c2      1 init: Starting service 'cnd'...
[    7.097425] c3    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850879
[    7.097425] c3    491
[    7.102201] c0      1 init: Starting service 'cnss_diag'...
[    7.104078] c0      1 init: Starting service 'cnss-daemon'...
[    7.104692] c0    491 EXT4-fs warning (device sda35): ext4_lookup:1603: Inconsistent encryption contexts: 3850301/3850880
[    7.104692] c0    491
[    7.122165] c0      1 init: Starting service 'loc_launcher'...
[    7.123077] c0      1 init: Starting service 'init-radio-sh'...
[    7.125474] c0      1 init: Starting service 'nanohub_slpi'...
[    7.126593] c0      1 init: Starting service 'gatekeeperd'...
[    7.127516] c0      1 init: Starting service 'update_engine'...
[    7.135597] c0    491 wcdcal_hwdep_ioctl_shared: incorrect firmware size 154 for vbat
[    7.136786] c0    575 pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue.
[    7.141692] c0    575 pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f7200000 to 0x00000000f7300000 size 100000
[    7.143422] c1    610 devbw soc:qcom,cpubw: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    7.149113] c1    433 type=1400 audit(13234147.826:32): avc: denied { read write } for pid=606 comm="imsqmidaemon" name="diag" dev="tmpfs" ino=15131 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.150126] c0      1 init: Service 'ssr_setup' (pid 607) exited with status 0
[    7.155052] c1    433 type=1400 audit(13234147.830:33): avc: denied { dac_override } for pid=642 comm="thermal-engine" capability=1 scontext=u:r:thermal-engine:s0 tcontext=u:r:thermal-engine:s0 tclass=capability permissive=0
[    7.187681] c0      1 dwc3 6a00000.dwc3: request ffffffc0f4a03700 was not queued to ep0out
[    7.196212] c0      1 mtp_bind_config
[    7.197993] c3    433 type=1400 audit(1505257935.408:34): avc: granted { net_admin } for pid=630 comm="cnss-daemon" capability=12 scontext=u:r:cnss-daemon:s0 tcontext=u:r:cnss-daemon:s0 tclass=capability
[    7.221150] c3    433 type=1400 audit(1505257935.415:35): avc: denied { read write } for pid=657 comm="time_daemon" name="diag" dev="tmpfs" ino=15131 scontext=u:r:time:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.221416] c3    433 type=1400 audit(1505257935.418:36): avc: denied { read write } for pid=662 comm="cnss-daemon" name="diag" dev="tmpfs" ino=15131 scontext=u:r:cnss-daemon:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.233740] c1    575 pil-q6v5-mss 2080000.qcom,mss: MBA boot done
[    7.288141] c0      1 init: Starting service 'imsdatadaemon'...
[    7.289080] c0      1 init: Service 'cnss_diag' (pid 626) exited with status 255
[    7.289247] c0      1 init: Service 'init-radio-sh' (pid 632) exited with status 0
[    7.341534] c0    633 'opened /dev/sdsprpc-smd c 215 1'
[    7.361670] c2    433 type=1400 audit(1505257935.475:37): avc: denied { dac_override } for pid=626 comm="cnss_diag" capability=1 scontext=u:r:cnss_diag:s0 tcontext=u:r:cnss_diag:s0 tclass=capability permissive=0
[    7.362577] c2    433 type=1400 audit(1505257935.488:38): avc: denied { dac_override } for pid=609 comm="netmgrd" capability=1 scontext=u:r:netmgrd:s0 tcontext=u:r:netmgrd:s0 tclass=capability permissive=0
[    7.362925] c2    433 type=1400 audit(1505257935.498:39): avc: denied { read write } for pid=625 comm="cnd" name="diag" dev="tmpfs" ino=15131 scontext=u:r:cnd:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.364608] c3    745 msm_thermal:interrupt_mode_init switch to interrupt mode
[    7.364608] c3    745 ,
[    7.364657] c3    745 msm_thermal:disable_msm_thermal Max frequency reset for CPU0
[    7.364667] c3    745 msm_thermal:disable_msm_thermal Max frequency reset for CPU1
[    7.364672] c3    745 msm_thermal:disable_msm_thermal Max frequency reset for CPU2
[    7.364677] c3    745 msm_thermal:disable_msm_thermal Max frequency reset for CPU3
[    7.368303] c2    745 msm_thermal:set_enabled enabled = 0
[    7.370137] c2    745 msm_thermal:store_cpus_offlined "thermal-engine"(PID:745) request cpus offlined mask 0
[    7.479909] c2    433 type=1400 audit(1505257935.688:40): avc: denied { read write } for pid=701 comm="imsdatadaemon" name="diag" dev="tmpfs" ino=15131 scontext=u:r:ims:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[    7.526090] c0    618 dwc3 dwc3_gadget_conndone_interrupt: usb conn speed = 3
[    7.539776] c0      4 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 0,connect2pc 0
[    7.539788] c0      4 android_work: [USB] android_work: sw_connected 0, connected 1 last_uevent 0
[    7.539992] c0      4 android_work: android_work: sent uevent USB_STATE=CONNECTED
[    7.540000] c0      4 android_work: [USB] android_work: set usb_connect2pc = 1
[    7.611985] c0    259 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
[    7.612101] c0    259 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
[    7.612255] c0      4 SMBCHG: smbchg_stay_awake: staying awake: 0x02 (bit 2)
[    7.612311] c0      4 SMBCHG: smbchg_vfloat_adjust_check: Starting vfloat adjustments
[    7.612484] c0      4 android_work: [USB] android_work: sw_suspended 0, suspended 0 config 1,connect2pc 1
[    7.612492] c0      4 android_work: [USB] android_work: sw_connected 1, connected 1 last_uevent 1
[    7.613892] c0    379 SMBCHG: smbchg_relax: relaxing: 0x00 (bit 2)
[    7.616829] c0    560 healthd: battery l=59 v=3835 t=26.5 h=2 st=2 c=787 chg=a
[    7.625175] c0    560 healthd: battery l=59 v=3835 t=26.5 h=2 st=2 c=787 chg=a
[    7.666779] c0      4 android_work: android_work: sent uevent USB_STATE=CONFIGURED
[    7.728252] c1    448 nanohub: nanohub_bl_read_memory: status=79, addr=08000000, length=173068
[    7.729106] c1    448 nanohub: i=0, erase=0, erase_write=1, write=0
[    7.729121] c1    448 nanohub: i=1, erase=0, erase_write=1, write=0
[    7.729127] c1    448 nanohub: i=2, erase=0, erase_write=1, write=0
[    7.729133] c1    448 nanohub: i=3, erase=0, erase_write=1, write=0
[    7.729166] c1    448 nanohub nanohub: nanohub_download_bl: status=79
[    7.930217] c1    491 msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
[    7.960415] c1    491 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.960931] c1    491 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.961352] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.961367] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
[    7.961674] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.961686] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
[    7.961913] c1    491 [AUD] snd_soc_qdsp6v2: msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
[    7.962181] c1    491 [AUD] snd_soc_qdsp6v2: msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
[    7.962412] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.962421] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
[    7.962660] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
[    7.962669] c1    491 [AUD] snd_soc_qdsp6v2: msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
[    7.967144] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.968097] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.968981] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.969413] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.972737] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.973480] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.975051] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.976631] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.984876] c1    491 msm_pcm_volume_ctl_get substream runtime not found
[    7.985302] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.986588] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.989399] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.990817] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.992192] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    7.993837] c1    491 [AUD] snd_soc_qdsp6v2: msm_compr_audio_effects_config_get: stream or effects inactive
[    8.011668] c1    491 [AUD] snd_soc_msm8996: msm_htc_ftm_get: non ftm state
[    8.011694] c1    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.0
[    8.011702] c1    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.1
[    8.011711] c1    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.2
[    8.011719] c1    491 [AUD] snd_soc_msm8996: ftm gpio value 0 on No.3
[    8.012567] c1    491 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    8.012581] c1    491 [AUD] snd_soc_msm8996: msm_adaptivesound_enable_get: adaptivesound_enable = 0 0x0
[    8.012824] c1    491 [AUD] snd_soc_qdsp6v2: get_adm_custom_effect_status: usSetEffectBit is 0x0
[    8.012834] c1    491 [AUD] snd_soc_msm8996: msm_onedotone_get: htc_onedotone_enable = 0 0x0
[    8.025102] c1    491 tasha_codec tasha_codec: tasha_mad_input_put: mic bias source not found for input = DMIC1
[    8.178353] c1    613 msm_pm_qos_add_request: add request
[    8.193161] c2    613 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx378
[    8.209027] c0    613 msm_cci_init:1374: hw_version = 0x10040000
[    8.209753] c0    613 imx378_htc probe succeeded
[    8.227492] c1    613 msm_sensor_fill_eeprom_subdevid_by_name:208 Eeprom userspace probe for sony_imx179
[    8.243828] c1    613 msm_cci_init:1374: hw_version = 0x10040000
[    8.244177] c3    613 imx179_htc probe succeeded
[    8.261907] c3    613 msm_csid_init: CSID_VERSION = 0x30050000
[    8.262498] c0    613 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[    8.264477] c0    613 msm_csid_init: CSID_VERSION = 0x30050000
[    8.265199] c0      0 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[    8.269675] c0    698 tfa98xx_spk_event(): event 2
[    8.276309] c3    613 msm_cci_init:1374: hw_version = 0x10040000
[    8.292246] c0    247 sps: BAM device 0x0000000007584000 is not registered yet.
[    8.292541] c0    247 sps:BAM 0x0000000007584000 is registered.
[    8.293019] c0    247 sps:BAM 0x0000000007584000 (va:0xffffff8001e00000) enabled: ver:0x19, number of pipes:24
[    8.388275] c0      0 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    8.388291] c0      0 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[    8.388312] c0      0 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[    8.388324] c0      0 ->action():           (null)
[    8.388330] c0      0    IRQ_NOPROBE set
[    8.388335] c0      0  IRQ_NOREQUEST set
[    8.388340] c0      0   IRQ_NOTHREAD set
[    8.388658] c0    432 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[    8.388664] c0    432 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[    8.388676] c0    432 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[    8.388685] c0    432 ->action():           (null)
[    8.388690] c0    432    IRQ_NOPROBE set
[    8.388695] c0    432  IRQ_NOREQUEST set
[    8.388699] c0    432   IRQ_NOTHREAD set
[    8.421594] c3    575 pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset
[    8.515893] c0    611 pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up
[    8.515997] c0    330 pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received
[    8.518525] c3    575 IPA received MPSS AFTER_POWERUP
[    8.518535] c3    575 IPA AFTER_POWERUP handling is complete
[    8.522565] c0    330 M-Notify: General: 7
[    8.567107] c2    613 msm_cci_init:1374: hw_version = 0x10040000
[    8.574033] c3      1 init: Service 'flash-nanohub-fw' (pid 448) exited with status 0
[    8.605144] c0    259 sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[    8.764182] c0      4 apr_tal:Modem Is Up
[    8.766767] c2     49 diag: In socket_open_client, socket not initialized for MODEM_CMD
[    8.766859] c2     49 diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
[    8.767577] c3    433 type=1400 audit(1505257936.978:41): avc: denied { create } for pid=49 comm="kworker/u8:2" scontext=u:r:kernel:s0 tcontext=u:r:kernel:s0 tclass=socket permissive=0
[    8.948907] c0     43 Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01
[    8.950154] c0     49 ipa-wan handle_indication_req:133 not send indication
[    8.951548] c0     49 ipa ipa_uc_response_hdlr:461 IPA uC loaded
[    8.951598] c0     49 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    8.951631] c0     43 QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received
[    8.956152] c0     49 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    8.957899] c0     49 ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130
[    8.957935] c0     49 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[    9.051054] c3    613 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[    9.051067] c3    613 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[    9.051418] c2    433 type=1400 audit(1505257937.261:42): avc: denied { search } for pid=613 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    9.051508] c2    433 type=1400 audit(1505257937.261:43): avc: denied { search } for pid=613 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    9.051565] c2    433 type=1400 audit(1505257937.261:44): avc: denied { search } for pid=613 comm="cameraserver" name="firmware" dev="dm-0" ino=25 scontext=u:r:cameraserver:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[    9.893395] c1    359 [Cable impedance] Incorrect charger type, ignore detection.
[   10.330593] c2    433 type=1400 audit(1505257938.541:45): avc: granted { net_admin } for pid=1085 comm="lowi-server" capability=12 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   10.348730] c3    698 tfa98xx_spk_event(): event 4
[   10.406362] c2    433 type=1400 audit(1505257938.611:46): avc: granted { net_raw } for pid=1086 comm="slim_daemon" capability=13 scontext=u:r:location:s0 tcontext=u:r:location:s0 tclass=capability
[   10.598562] c0     43 smd_write_segment_avail: non-packet channel specified
[   12.165622] c2   1206 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   12.167225] c2   1206 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   12.169055] c1   1206 ipa-wan ipa_wwan_ioctl:1522 get AGG size 8192 count 10
[   12.169460] c1   1206 ipa ipa_sps_irq_control_all:937 EP (5) not allocated.
[   12.178797] c1   1206 ipa ipa_assign_policy:2973 get close-by 8192
[   12.178814] c1   1206 ipa ipa_assign_policy:2979 set rx_buff_sz 7680
[   12.178823] c1   1206 ipa ipa_assign_policy:3001 set aggr_limit 6
[   12.210164] c1   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data0) register to IPA
[   12.276550] c1   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data1) register to IPA
[   12.333657] c2   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data2) register to IPA
[   12.379595] c1   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data3) register to IPA
[   12.423343] c0   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data4) register to IPA
[   12.472832] c1   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data5) register to IPA
[   12.510079] c3   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data6) register to IPA
[   12.568262] c1   1206 ipa-wan ipa_wwan_ioctl:1428 dev(rmnet_data7) register to IPA
[   16.321286] c2   1166 input: uinput-folio as /devices/virtual/input/input9
[   16.514915] c0    560 healthd: battery l=59 v=3835 t=26.7 h=2 st=2 c=787 chg=a
[   18.983210] c1   1166 acc_open
[   18.983277] c1   1166 acc_release
[   19.363493] c2    613 MSM-SENSOR-INIT msm_sensor_wait_for_probe_done:53 msm_sensor_wait_for_probe_done:53 wait timeout
[   19.363493] c2    613
[   19.363615] c2    613 MSM-SENSOR-INIT msm_sensor_init_subdev_do_ioctl:148 msm_sensor_init_subdev_do_ioctl:148 VIDIOC_MSM_SENSOR_INIT_CFG failed (non-fatal)
[   19.365819] c2    613 msm_pm_qos_update_request: update request 100
[   19.365942] c2    613 msm_pm_qos_update_request: update request -1<6>[   19.388290] c3   1443 msm_csid_init: CSID_VERSION = 0x30050000
[   19.389592] c1   1443 msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800
[   19.412660] c0   1454 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[   19.412684] c0   1454 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[   19.413736] c1   1443 msm_cci_init:1374: hw_version = 0x10040000
[   19.645328] c1    433 type=1400 audit(1505257947.855:47): avc: denied { search } for pid=1462 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15235 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[   19.654684] c3    259 [FLT] qpnp_flash_led_work: brt = 0
[   19.657424] c0    259 SMBCHG: smbchg_switch_buck_frequency: Fsw not changed, flash_active: 0
[   19.657460] c0    259 SMBCHG: smbchg_otg_pulse_skip_disable: enabling pulse skip, reason 2
[   19.672881] c1    623 QSEECOM: qseecom_load_app: App (fpctzappfingerprint) does'nt exist, loading apps for first time
[   19.688000] c3    613 msm_pm_qos_update_request: update request 100
[   19.688049] c3    613 msm_pm_qos_update_request: update request -1<6>[   19.691762] c3   1474 msm_csid_init: CSID_VERSION = 0x30050000
[   19.693065] c0   1477 msm_csid_irq CSID1_IRQ_STATUS_ADDR = 0x800
[   19.706462] c3   1482 MSM-CPP cpp_init_hardware:863 CPP HW Version: 0x60000000
[   19.706484] c3   1482 MSM-CPP cpp_init_hardware:881 stream_cnt:0
[   19.713734] c3   1474 msm_cci_init:1374: hw_version = 0x10040000
[   19.777069] c3    433 type=1400 audit(1505257947.985:48): avc: denied { search } for pid=1492 comm="CAM_MctServ" name="graphics" dev="tmpfs" ino=15235 scontext=u:r:cameraserver:s0 tcontext=u:object_r:graphics_device:s0 tclass=dir permissive=0
[   20.442485] c2    623 QSEECOM: qseecom_load_app: App with id 6 (fpctzappfingerprint) now loaded
[   20.464699] c2    623 input: uinput-fpc as /devices/virtual/input/input10
[   21.231576] c2   1142 fwpath_changed_handler : new_mode : sta, present_mode :
[   21.231658] c2   1142 kickstart_driver: load: 1 wlan_hdd_inited: 0, mode_change: 1 caller: fwpath_changed_handler
[   21.231744] c2   1142 wlan: loading driver v4.4.25.027s_1
[   21.270357] c0   1142 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   21.275434] c0   1142 msm_pcie_enable: PCIe RC0 PHY is ready!
[   21.286621] c0   1142 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   21.328452] c0   1142 msm_pcie_enable: PCIe RC0 link initialized
[   21.335412] c3    433 type=1400 audit(1505257949.541:49): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.336140] c3    433 type=1400 audit(1505257949.541:50): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.336296] c3    433 type=1400 audit(1505257949.541:51): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.364059] c1   1142 hif_pci_probe:, con_mode= 0x0
[   21.364133] c1   1142 PCI device id is 003e :003e
[   21.364215] c1   1142 cnss_wlan_pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[   21.365125] c1   1142 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   21.367310] c1   1142
[   21.367310] c1   1142  hif_pci_configure : num_desired MSI set to 0
[   21.367640] c1   1142
[   21.367640] c1   1142  Using PCI Legacy Interrupt
[   21.419497] c1    433 type=1400 audit(1505257949.618:52): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.420436] c1    433 type=1400 audit(1505257949.621:53): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.420794] c1    433 type=1400 audit(1505257949.621:54): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.516303] c1   1142 wlan: [1142:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   21.516395] c1   1142 wlan: [1142:E :HDD] hdd_apply_cfg_ini: Reg Parameter gRrmNonOperChanMax > allowed Maximum [8 > 7]. Enforcing Default= 4
[   21.520406] c1   1142 wlan: [1142:E :HDD] hdd_apply_cfg_ini: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255
[   21.530487] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   21.530843] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   21.531511] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   21.532442] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   21.533185] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   21.556376] c1   1142 NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   21.561802] c1   1142 ol_download_firmware: Using 0x1234 for the remainder of init
[   21.561848] c1   1142 ol_transfer_codeswap_struct: failed to get codeswap structure
[   21.570582] c1    433 type=1400 audit(1505257949.771:55): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.571137] c1    433 type=1400 audit(1505257949.771:56): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.571461] c1    433 type=1400 audit(1505257949.771:57): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.625511] c1   1142 wlan: [1142:E :VOS] __ol_transfer_bin_file: transferring file: otp30.bin size 23985 bytes done!
[   21.639680] c1    433 type=1400 audit(1505257949.835:58): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.640469] c1    433 type=1400 audit(1505257949.835:59): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.640807] c1    433 type=1400 audit(1505257949.835:60): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.658339] c2   1142 Board extended Data download address: 0x0
[   21.664666] c0   1142 wlan: [1142:E :VOS] __ol_transfer_bin_file: transferring file: bdwlan30.b82 size 8124 bytes done!
[   21.665499] c0   1142 __ol_transfer_bin_file: no Setup file defined
[   21.672081] c0    433 type=1400 audit(1505257949.875:61): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.672672] c0    433 type=1400 audit(1505257949.875:62): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   21.672937] c0    433 type=1400 audit(1505257949.875:63): avc: denied { search } for pid=1142 comm="Binder:621_2" name="firmware" dev="dm-0" ino=25 scontext=u:r:netd:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   22.513321] c2   1142 wlan: [1142:E :VOS] __ol_transfer_bin_file: transferring file: qwlan30.bin size 749028 bytes done!
[   22.514834] c2   1142 +HTCCreate ..  HIF :ffffffc06ab6f000
[   22.514940] c2   1142 -HTCCreate (0xffffffc0e63fd000)
[   22.515192] c2   1142 wlan: [1142:F :WDA] WMA --> wmi_unified_attach - success
[   22.515240] c2   1142 ol_if_dfs_attach: called; ptr=ffffffc0f51b9c54, radar_info=ffffffc0e04c37b0
[   22.516246] c2   1142 wlan: [1142:E :SAP] dfs_init_radar_filters[201]: Unknown dfs domain 0
[   22.517251] c2   1142 +HWT
[   22.517278] c2   1142 pipe_num:0 pipe_info:0xffffffc06ab6f0b8
[   22.517413] c2   1142 pipe_num:3 pipe_info:0xffffffc06ab6f220
[   22.517449] c2   1142 pipe_num:4 pipe_info:0xffffffc06ab6f298
[   22.517712] c2   1142 pipe_num:5 pipe_info:0xffffffc06ab6f310
[   22.527898] c2   1142 Target Ready! : transmit resources : 2 size:1792, MaxMsgsPerHTCBundle = 1
[   22.527949] c2   1142 HTC Service Index : 1 TX : 0x100 : alloc:2
[   22.527980] c2   1142 HTC Service:0x0001, ULpipe:0 DLpipe:1 id:0 Ready
[   22.528000] c2   1142 -HWT
[   22.528472] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.528962] c2   1142 is_full_reorder_offloaded? 1
[   22.528994] c2   1142 HTC Service TX : 0x300 : allocation is zero!
[   22.529376] c2   1142 HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready
[   22.529402] c2   1142 HTC Service:0x0300 ep:1 TX flow control disabled
[   22.546116] c2   1142 HTT: full reorder offload enabled
[   22.548672] c2   1142 HTC Service:0x0100, ULpipe:3 DLpipe:2 id:2 Ready
[   22.548714] c2   1142 wlan: [1142:F :WDA] WMA --> wmi_unified_connect_htc_service - success
[   22.548910] c0   1515 wlan: [1515:F :WDA] McThread: WNI_CFG_DNLD_REQ
[   22.549116] c2   1142 HTC using TX credit flow control
[   22.550522] c0      4 __wmi_control_rx: WMI UNIFIED SERVICE READY event
[   22.550705] c0      4 wlan: [4:F :WDA] WMA <-- WMI_SERVICE_READY_EVENTID
[   22.550775] c0      4 wlan: [4:E :WDA] wma_rx_service_ready_event: Firmware build version : 43228007
[   22.550823] c0      4 wlan: [4:E :WDA] wma_rx_service_ready_event: Board version: 0.1031102
[   22.550933] c0      4 wlan: [4:F :WDA] WMA --> WMI_INIT_CMDID
[   22.551524] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.567149] c0      4 __wmi_control_rx:  WMI UNIFIED READY event
[   22.567246] c0      4 wlan: [4:F :WDA] WMA <-- WMI_READY_EVENTID
[   22.568780] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.577465] c2   1142 wlan: [1142:E :SME] csr_init_chan_list: 333: init time country code US
[   22.577563] c2     17 cfg80211: Calling CRDA for country: US
[   22.577718] c0   1515 wlan: [1515:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x4d
[   22.577898] c2     17 wlan: [17:F :HDD] pAdapter is null !!
[   22.578124] c2     17 wlan: [17:E :WDA] regdmn_set_dfs_region: dfs_region: 1
[   22.578162] c2     17 cfg80211: Regulatory domain changed to country: US
[   22.578182] c2     17 cfg80211:  DFS Master region: FCC
[   22.578198] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.578221] c2     17 cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   22.578251] c2     17 cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578275] c2     17 cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (N/A)
[   22.578299] c2     17 cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[   22.578322] c2     17 cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[   22.578344] c2     17 cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578368] c2     17 cfg80211:   (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578390] c2     17 cfg80211:   (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578409] c2     17 cfg80211:   (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578430] c2     17 cfg80211:   (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578448] c2     17 cfg80211:   (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578466] c2     17 cfg80211:   (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578483] c2     17 cfg80211:   (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578501] c2     17 cfg80211:   (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578519] c2     17 cfg80211:   (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578537] c2     17 cfg80211:   (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A)
[   22.578555] c2     17 cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   22.580240] c2   1142 wlan: [1142:E :WDA] MCC TX Pause Event Handler register
[   22.580295] c2   1142 wlan: [1142:E :WDA] Target does not support cesium network
[   22.582744] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.589915] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.590162] c2   1142 Pkt log is enabled
[   22.590294] c2   1142 wlan: [1142:E :SME] sme_AddChAvoidCallback: Plug in CH AVOID CB
[   22.590427] c0   1515 target uses HTT version 3.28; host uses 3.27
[   22.590476] c0   1515 *** Warning: host/target HTT versions are different, though compatible!
[   22.590830] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.591227] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.591940] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.592555] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.593819] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.595956] c0   1515 wlan: [1515:E :WDA] wma_unified_vdev_create_send: ID = 0 VAP Addr = 40:4e:36:1e:c9:0e
[   22.598743] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.601833] c2     17 wlan: [17:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   22.602119] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.619579] c0   1515 wlan: [1515:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   22.620713] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.624779] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.629536] c0   1515 wlan: [1515:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = 42:4e:36:1e:c9:0e
[   22.629939] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.630788] c0   1515 wlan: [1515:F :WDA] Creating self peer 42:4e:36:1e:c9:0e, vdev_id 1
[   22.631300] c0   1515 wlan: [1515:E :WDA] wma_create_peer: Created peer with peer_addr 42:4e:36:1e:c9:0e vdev_id 1, peer_count - 1
[   22.634911] c2     17 wlan: [17:E :HDD] wlan_hdd_validate_context: 1162: wlan_hdd_roc_request_dequeue+0x28/0x1e0 Unloading/Loading in Progress. Ignore!!!
[   22.635296] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.645089] c2   1142 Host SW:4.4.25.027s_1, FW:4.3.2.7, HW:QCA6174_REV3_2
[   22.645642] c0   1515 wlan: [1515:E :WDA] Invalid wda_cli_set pdev command/Not yet implemented 0x34
[   22.645967] c2   1142 wlan: [1142:E :HDD] hdd_hex_string_to_u16_array: 6277: str ffffffc06a8be92d intArray ffffffc0e04c397a intArrayMaxLen 6
[   22.646986] c0   1513 wlan: [1513:E :VOS] vos_get_log_indicator: 2812: vos context initialization is in progress LoadUnload: 1 LogP: 0 ReInit: 0
[   22.647507] c2   1142 wlan: [1142:E :HDD] hdd_hex_string_to_u16_array: 6277: str ffffffc06a8be92d intArray ffffffc0e04c397a intArrayMaxLen 6
[   22.648321] c2   1142 ol_pktlog_init: pktlogmod_init successfull
[   22.648439] c2   1142 hif_pci_pm_runtime_init: Enabling RUNTIME PM, Delay: 500 ms
[   22.648606] c2   1142 wlan: driver loaded in 1416925
[   22.865168] c0      1 init: Starting service 'p2p_supplicant'...
[   23.350086] c0      4 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   23.351810] c0      4 cnss: runtime suspend status: 0
[   23.385963] c2   1515 wlan: [1515:F :WDA] P2P Device: removing self peer 42:4e:36:1e:c9:0e
[   23.385999] c2   1515 TXRX: ol_txrx_peer_detach:peer ffffffc06a83e000 (42:4e:36:1e:c9:0e)
[   23.386027] c2   1515 wlan: [1515:E :WDA] wma_remove_peer: Removed peer with addr 42:4e:36:1e:c9:0e vdevid 1 peer_count 0
[   23.387295] c2   1515 wlan: [1515:E :WDA] wma_unified_vdev_create_send: ID = 1 VAP Addr = 42:4e:36:1e:c9:0e
[   23.387359] c2   1515 wlan: [1515:F :WDA] Creating self peer 42:4e:36:1e:c9:0e, vdev_id 1
[   23.387391] c2   1515 wlan: [1515:E :WDA] wma_create_peer: Created peer with peer_addr 42:4e:36:1e:c9:0e vdev_id 1, peer_count - 1
[   23.394299] c2   1531 IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[   23.396797] c2     17 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   23.397117] c2     17 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   23.400673] c2     17 msm_pcie_enable: PCIe RC0 PHY is ready!
[   23.410827] c2     17 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   23.415994] c3   1546 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   23.416920] c3   1546 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   23.417676] c3   1546 SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[   23.419152] c0   1567 FUSE: SHORTCIRCUIT enabled [sdcard : 1567]!
[   23.419192] c0   1566 FUSE: SHORTCIRCUIT enabled [sdcard : 1566]!
[   23.419261] c0   1568 FUSE: SHORTCIRCUIT enabled [sdcard : 1568]!
[   23.437675] c2     17 msm_pcie_enable: PCIe RC0 link initialized
[   23.458499] c2     17 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   23.485658] c2     17 cnss: runtime resume status: 0
[   24.297893] c0      4 get_ice_device_from_storage_type: found ice device ffffffc0f6bd5a00
[   24.300411] c0      4 get_ice_device_from_storage_type: found ice device ffffffc0f6bd5a00
[   24.386808] c1    359 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   24.388398] c1    359 cnss: runtime suspend status: 0
[   24.480701] c1    433 type=1400 audit(1505257952.678:64): avc: denied { read write } for pid=1688 comm="system_server" name="diag" dev="tmpfs" ino=15131 scontext=u:r:system_server:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[   24.524140] c3    617 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   24.531700] c3    617 subsys-restart: __subsystem_get(): Changing subsys fw_name to venus
[   24.539432] c2    433 type=1400 audit(1505257952.748:65): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.539573] c2    433 type=1400 audit(1505257952.748:66): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.539631] c2    433 type=1400 audit(1505257952.748:67): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.549674] c3    617 subsys-pil-tz ce0000.qcom,venus: venus: loading from 0x0000000090f00000 to 0x0000000091400000
[   24.573124] c3    433 type=1400 audit(1505257952.781:68): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.577805] c2    433 type=1400 audit(1505257952.781:69): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.578312] c2    433 type=1400 audit(1505257952.781:70): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.609053] c2    433 type=1400 audit(1505257952.808:71): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.609173] c2    433 type=1400 audit(1505257952.808:72): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.609227] c2    433 type=1400 audit(1505257952.808:73): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.630736] c2    433 type=1400 audit(1505257952.841:74): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.630847] c2    433 type=1400 audit(1505257952.841:75): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.630905] c2    433 type=1400 audit(1505257952.841:76): avc: denied { search } for pid=617 comm="mediacodec" name="firmware" dev="dm-0" ino=25 scontext=u:r:mediacodec:s0 tcontext=u:object_r:firmware_file:s0 tclass=dir permissive=0
[   24.674724] c3    617 subsys-pil-tz ce0000.qcom,venus: venus: Brought out of reset
[   24.713965] c0    752 msm_vidc: info: Closed video instance: 0000000000000000
[   24.721552] c1    617 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   24.736925] c3    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.741712] c2   1628 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   24.752187] c1    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.758064] c1   1628 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   24.767970] c1    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.773792] c0   1628 msm_vidc: info: Opening video instance: 0000000000000000, 0
[   24.783198] c2    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.808857] c0   1628 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.831874] c1    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.836943] c1   1628 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.864142] c1    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.871167] c1   1628 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.886282] c0    752 msm_vidc: info: Closed video instance: 0000000000000000
[   24.894476] c0   1803 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.909653] c2    617 msm_vidc: info: Closed video instance: 0000000000000000
[   24.913594] c1    359 cnss_wlan_pci 0000:01:00.0: Refused to change power state, currently in D3
[   24.913810] c1    359 msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0.
[   24.917368] c1    359 msm_pcie_enable: PCIe RC0 PHY is ready!
[   24.917990] c2   1628 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.927507] c1    359 msm_pcie_enable: PCIe: Release the reset of endpoint of RC0.
[   24.946037] c2   1803 msm_vidc: info: Closed video instance: 0000000000000000
[   24.954475] c2    617 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   24.955023] c1    359 msm_pcie_enable: PCIe RC0 link initialized
[   24.970153] c1    359 cnss_wlan_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   24.975805] c1    359 cnss: runtime resume status: 0
[   24.983314] c3   1628 msm_vidc: info: Closed video instance: 0000000000000000
[   24.993783] c3    617 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   25.013805] c0    617 msm_vidc: info: Closed video instance: 0000000000000000
[   25.019553] c0    752 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   25.038249] c1   1803 msm_vidc: info: Closed video instance: 0000000000000000
[   25.044755] c1   1628 msm_vidc: info: Opening video instance: 0000000000000000, 1
[   25.058669] c0   1803 msm_vidc: info: Closed video instance: 0000000000000000
[   25.374990] c0    620 irq 354, desc: ffffffc0f93d4e00, depth: 0, count: 0, unhandled: 0
[   25.375012] c0    620 ->handle_irq():  ffffffc00032db6c, msm_gpio_irq_handler+0x0/0x148
[   25.375035] c0    620 ->irq_data.chip(): ffffffc0015885a8, gic_chip+0x0/0xe8
[   25.375050] c0    620 ->action():           (null)
[   25.375057] c0    620    IRQ_NOPROBE set
[   25.375063] c0    620  IRQ_NOREQUEST set
[   25.375069] c0    620   IRQ_NOTHREAD set
[   25.536786] c1    359 msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0.
[   25.538248] c1    359 cnss: runtime suspend status: 0
[   25.920118] c1    359 [BATT] chg_full_check_worker: vol:3835, curr=787, is_full_count=0, is_full=0 at 25920122162 (2017-09-12 23:12:34.131914521 UTC)
[   25.971925] c1      1 init: Starting service 'start_hci_filter'...
[   26.030660] c3    433 type=1400 audit(1505257954.241:77): avc: denied { read write } for pid=1891 comm="wcnss_filter" name="diag" dev="tmpfs" ino=15131 scontext=u:r:wcnss_filter:s0 tcontext=u:object_r:diag_device:s0 tclass=chr_file permissive=0
[   26.504457] c0    698 tfa98xx_spk_event(): event 2
[   27.578814] c1      1 init: avc:  granted  { set } for property=net.lte.ims.data.enabled pid=1713 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
[   29.203206] c0      1 init: Service 'bootanim' (pid 492) exited with status 0
[   29.317570] c3      1 init: write_file: Unable to open '/proc/sys/kernel/sched_boost': No such file or directory