1[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu 2[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpuacct 3[ 0.000000] [0: swapper: 0] Linux version 3.18.20-8575098 (dpi@SWHD7522) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Sep 9 15:04:11 KST 2016 4[ 0.000000] [0: swapper: 0] CPU: AArch64 Processor [511f2112] revision 2 5[ 0.000000] [0: swapper: 0] val = 49 6[ 0.000000] [0: swapper: 0] Security Boot Mode 7[ 0.000000] [0: swapper: 0] androidboot.revision fsetup_bootmode: boot_mode is 0 8[ 0.000000] [0: swapper: 0] set_afc_mode: mode is 0x3030 9[ 0.000000] [0: swapper: 0] set_afc_mode: afc_mode is 0x30 10[ 0.000000] [0: swapper: 0] charging_mode() : 0x30(48) 11[ 0.000000] [0: swapper: 0] efi: Getting EFI parameters from FDT: 12[ 0.000000] [0: swapper: 0] efi: UEFI not found. 13[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 42 MiB 14[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'peripheral_region@8ea00000': base 0x000000008f400000, size 49 MiB 15[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'modem_region@88800000': base 0x0000000088800000, size 108 MiB 16[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'cont_splash_mem@83401000': base 0x000000009a400000, size 28 MiB 17[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'klog_region@0': base 0x00000000851ff000, size 2 MiB 18[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'tima_region@9C000000': base 0x000000009c000000, size 2 MiB 19[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'rkp_region@0x9C200000': base 0x000000009c200000, size 15 MiB 20[ 0.000000] [0: swapper: 0] Reserved memory: reserved region for node 'camera_mem_region@0xC0000000': base 0x00000000c0000000, size 328 MiB 21[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000085800000, size 42 MiB 22[ 0.000000] [0: swapper: 0] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool 23[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000008f400000, size 49 MiB 24[ 0.000000] [0: swapper: 0] Reserved memory: initialized node peripheral_region@8ea00000, compatible id removed-dma-pool 25[ 0.000000] [0: swapper: 0] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000fe800000, size 20 MiB 26[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000fe800000, size 20 MiB 27[ 0.000000] [0: swapper: 0] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool 28[ 0.000000] [0: swapper: 0] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000f8c00000, size 92 MiB 29[ 0.000000] [0: swapper: 0] Reserved memory: created CMA memory pool at 0x00000000f8c00000, size 92 MiB 30[ 0.000000] [0: swapper: 0] Reserved memory: initialized node secure_region, compatible id shared-dma-pool 31[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x0000000088800000, size 108 MiB 32[ 0.000000] [0: swapper: 0] Reserved memory: initialized node modem_region@88800000, compatible id removed-dma-pool 33[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000851ff000, size 2 MiB 34[ 0.000000] [0: swapper: 0] Reserved memory: initialized node klog_region@0, compatible id removed-dma-pool 35[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009c000000, size 2 MiB 36[ 0.000000] [0: swapper: 0] Reserved memory: initialized node tima_region@9C000000, compatible id removed-dma-pool 37[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x000000009c200000, size 15 MiB 38[ 0.000000] [0: swapper: 0] Reserved memory: initialized node rkp_region@0x9C200000, compatible id removed-dma-pool 39[ 0.000000] [0: swapper: 0] Removed memory: created DMA memory pool at 0x00000000c0000000, size 328 MiB 40[ 0.000000] [0: swapper: 0] Reserved memory: initialized node camera_mem_region@0xC0000000, compatible id removed-dma-pool 41[ 0.000000] [0: swapper: 0] cma: Reserved 24 MiB at 0x00000000f7400000 42[ 0.000000] [0: swapper: 0] On node 0 totalpages: 905951 43[ 0.000000] [0: swapper: 0] DMA zone: 6068 pages used for memmap 44[ 0.000000] [0: swapper: 0] DMA zone: 0 pages reserved 45[ 0.000000] [0: swapper: 0] DMA zone: 388351 pages, LIFO batch:31 46[ 0.000000] [0: swapper: 0] Normal zone: 8088 pages used for memmap 47[ 0.000000] [0: swapper: 0] Normal zone: 517600 pages, LIFO batch:31 48[ 0.000000] [0: swapper: 0] psci: probing for conduit method from DT. 49[ 0.000000] [0: swapper: 0] psci: PSCIv1.0 detected in firmware. 50[ 0.000000] [0: swapper: 0] psci: Using standard PSCI v0.2 function IDs 51[ 0.000000] [0: swapper: 0] psci: Initializing psco_cpu_init 52[ 0.000000] [0: swapper: 0] psci: Initializing psco_cpu_init 53[ 0.000000] [0: swapper: 0] psci: Initializing psco_cpu_init 54[ 0.000000] [0: swapper: 0] PERCPU: Embedded 15 pages/cpu @ffffffc0fe35e000 s22016 r8192 d31232 u61440 55[ 0.000000] [0: swapper: 0] pcpu-alloc: s22016 r8192 d31232 u61440 alloc=15*4096 56[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 57[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 891795 58[ 0.000000] [0: swapper: 0] Kernel command line: sched_enable_hmp=1 sched_enable_power_aware=1 console=null androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 cma=24M@0-0xffffffff rcupdate.rcu_expedited=1 cordon=689ce3a108a29c224aeb6499dcf88ab7 connie=SM-G930A_ATT_USA_7ea7ce9a4f498d39b466f4ba02ba049d androidboot.ucs_mode=0 androidboot.security_mode=1526595585 androidboot.bootdevice=624000.ufshc androidboot.serialno=478f9b0d androidboot.baseband=msm lcd_id=0x4044 lcd_id2=0xffffff hall_ic=0x0 mdss_mdp.panel=1:dsi:0:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi androidboot.sec_atd.tty=/dev/ttyHSL0 androidboot.revision=15 androidboot.hmac_mismatch=0 androidboot.emmc_checksum=3 loglevel=4 sec_log=0x200000@0x85200000 sec_dbg=0x1ff000@0x85000000 sec_debug.reset_reason=0x5 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_<3>[ 0.000000] [0: swapper: 0] [MDSS] mdss_samsung_parse_panel_id : LCD_ID = 0x4044 59[ 0.000000] [0: swapper: 0] [MDSS] mdss_samsung_parse_panel_id : LCD_ID = 0xFFFFFF 60[ 0.000000] [0: swapper: 0] [MDSS] get_hall_ic_status : hall_ic : OPEN 61[ 0.000000] [0: swapper: 0] sec_dbg_setup: str=@0x85000000 62[ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_paddr = 0x85000000 63[ 0.000000] [0: swapper: 0] sec_dbg_setup: secdbg_size = 0x1ff000 64[ 0.000000] [0: swapper: 0] set_switch_sel: switch_sel: 0x003 65[ 0.000000] [0: swapper: 0] sec_bat_get_fg_reset, fg_reset:0 66[ 0.000000] [0: swapper: 0] PID hash table entries: 4096 (order: 3, 32768 bytes) 67[ 0.000000] [0: swapper: 0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) 68[ 0.000000] [0: swapper: 0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) 69[ 0.000000] [0: swapper: 0] Sorting __ex_table... 70[ 0.000000] [0: swapper: 0] Memory: 3325636K/3623804K available (13184K kernel code, 1699K rwdata, 6708K rodata, 5980K init, 7843K bss, 298168K reserved) 71[ 0.000000] [0: swapper: 0] Virtual kernel memory layout: 72[ 0.000000] [0: swapper: 0] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB) 73[ 0.000000] [0: swapper: 0] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum) 74[ 0.000000] [0: swapper: 0] 0xffffffbdc2000000 - 0xffffffbdc5f97800 ( 63 MB actual) 75[ 0.000000] [0: swapper: 0] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB) 76[ 0.000000] [0: swapper: 0] fixed : 0xffffffbffbdfe000 - 0xffffffbffbdff000 ( 4 KB) 77[ 0.000000] [0: swapper: 0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) 78[ 0.000000] [0: swapper: 0] memory : 0xffffffc000000000 - 0xffffffc0fe5e0000 ( 4069 MB) 79[ 0.000000] [0: swapper: 0] .init : 0xffffffc001476000 - 0xffffffc001a4d000 ( 5980 KB) 80[ 0.000000] [0: swapper: 0] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 81[ 0.000000] [0: swapper: 0] HMP scheduling enabled. 82[ 0.000000] [0: swapper/0: 0] Preemptible hierarchical RCU implementation. 83[ 0.000000] [0: swapper/0: 0] RCU dyntick-idle grace-period acceleration is enabled. 84[ 0.000000] [0: swapper/0: 0] NR_IRQS:64 nr_irqs:64 0 85[ 0.000000] [0: swapper/0: 0] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent 86[ 0.000000] [0: swapper/0: 0] MPM 1 irq mapping errored -517 87[ 0.000000] [0: swapper/0: 0] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). 88[ 0.000004] [0: swapper/0: 0] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns 89[ 0.000020] [0: swapper/0: 0] Switched to clocksource arch_sys_counter 90[ 0.000859] [0: swapper/0: 0] Console: colour dummy device 80x25 91[ 0.000879] [0: swapper/0: 0] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) 92[ 0.000889] [0: swapper/0: 0] pid_max: default: 32768 minimum: 301 93[ 0.008710] [0: swapper/0: 0] Security Framework initialized 94[ 0.008738] [0: swapper/0: 0] SELinux: Initializing. 95[ 0.008798] [0: swapper/0: 0] SELinux: Starting in enforcing mode 96[ 0.008844] [0: swapper/0: 0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) 97[ 0.008854] [0: swapper/0: 0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) 98[ 0.010172] [0: swapper/0: 0] Initializing cgroup subsys freezer 99[ 0.011212] [0: swapper/0: 1] /cpus/cpu@0: Unknown CPU type 100[ 0.011225] [0: swapper/0: 1] /cpus/cpu@1: Unknown CPU type 101[ 0.011234] [0: swapper/0: 1] /cpus/cpu@100: Unknown CPU type 102[ 0.011245] [0: swapper/0: 1] /cpus/cpu@101: Unknown CPU type 103[ 0.011282] [0: swapper/0: 1] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 9 counters available 104[ 0.011310] [0: swapper/0: 1] EFI services will not be available. 105[ 0.011440] [0: swapper/0: 0] NOHZ: local_softirq_pending 02 106[ 0.014149] [0: swapper/0: 1] 107[ 0.014149] [0: swapper/0: 1] ********************************************************** 108[ 0.014163] [0: swapper/0: 1] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 109[ 0.014169] [0: swapper/0: 1] ** ** 110[ 0.014175] [0: swapper/0: 1] ** trace_printk() being used. Allocating extra memory. ** 111[ 0.014181] [0: swapper/0: 1] ** ** 112[ 0.014187] [0: swapper/0: 1] ** This means that this is a DEBUG kernel and it is ** 113[ 0.014193] [0: swapper/0: 1] ** unsafe for produciton use. ** 114[ 0.014198] [0: swapper/0: 1] ** ** 115[ 0.014203] [0: swapper/0: 1] ** If you see this message and you are not debugging ** 116[ 0.014209] [0: swapper/0: 1] ** the kernel, report this immediately to your vendor! ** 117[ 0.014214] [0: swapper/0: 1] ** ** 118[ 0.014219] [0: swapper/0: 1] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** 119[ 0.014225] [0: swapper/0: 1] ********************************************************** 120[ 0.015246] [0: swapper/0: 1] samsung_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 121[ 0.015261] [0: swapper/0: 1] [MDSS] samsung_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 122[ 0.015271] [0: swapper/0: 1] [MDSS] samsung_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 123[ 0.015280] [0: swapper/0: 1] [MDSS] samsung_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 124[ 0.015639] [0: swapper/0: 1] MSM Memory Dump base table set up 125[ 0.015659] [0: swapper/0: 1] MSM Memory Dump apps data table set up 126[ 0.016135] [0: swapper/0: 1] clock-cpu-8996: configuring clocks for the perf cluster 127[ 0.016328] [0: swapper/0: 1] cpu_clock_8996_early_init: finished CPU clock configuration 128[ 0.026884] [1: swapper/0: 1] Brought up 4 CPUs 129[ 0.026905] [1: swapper/0: 1] SMP: Total of 4 processors activated. 130[ 0.033748] [2: swapper/0: 1] pinctrl core: initialized pinctrl subsystem 131[ 0.034878] [2: swapper/0: 1] regulator-dummy: no parameters 132[ 0.103921] [2: swapper/0: 1] NET: Registered protocol family 16 133[ 0.106274] [1: swapper/0: 1] cpuidle: using governor ladder 134[ 0.106342] [1: swapper/0: 1] cpuidle: using governor menu 135[ 0.106395] [1: swapper/0: 1] cpuidle: using governor qcom 136[ 0.107456] [1: swapper/0: 1] vdso: 2 pages (1 code @ ffffffc001a5d000, 1 data @ ffffffc001a5c000) 137[ 0.107902] [1: swapper/0: 1] software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff] 138[ 0.108736] [1: swapper/0: 1] DMA: preallocated 2048 KiB pool for atomic allocations 139[ 0.111325] [3: swapper/0: 1] samsung sys class init. 140[ 0.112360] [3: swapper/0: 1] ------------[ cut here ]------------ 141[ 0.112380] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/mm/nobootmem.c:228 ___alloc_bootmem_nopanic+0x44/0x9c() 142[ 0.112391] [3: swapper/0: 1] Modules linked in: 143[ 0.112404] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 3.18.20-8575098 #1 144[ 0.112413] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 145[ 0.112423] [3: swapper/0: 1] Call trace: 146[ 0.112440] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 147[ 0.112452] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 148[ 0.112467] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 149[ 0.112482] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 150[ 0.112494] [3: swapper/0: 1] [<ffffffc000127238>] warn_slowpath_null+0x14/0x20 151[ 0.112506] [3: swapper/0: 1] [<ffffffc00148c354>] ___alloc_bootmem_nopanic+0x40/0x9c 152[ 0.112517] [3: swapper/0: 1] [<ffffffc00148c5ac>] __alloc_bootmem+0x14/0x44 153[ 0.112530] [3: swapper/0: 1] [<ffffffc001490fc0>] sec_avc_log_init+0x34/0xd4 154[ 0.112541] [3: swapper/0: 1] [<ffffffc0014c3238>] sec_debug_init+0x14/0x23c 155[ 0.112551] [3: swapper/0: 1] [<ffffffc00147936c>] arm64_device_init+0x8/0x34 156[ 0.112560] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 157[ 0.112571] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 158[ 0.112580] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 159[ 0.112600] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdce6 ]--- 160[ 0.112665] [3: swapper/0: 1] allocating 262152 bytes at ffffffc0f8380000 (4080000000 physical) for avc log 161[ 0.112673] [3: swapper/0: 1] sec_avc_log_init: no old log found 162[ 0.113041] [3: swapper/0: 1] sec_dt_addr_init: restart_reason addr : 0xffffff800002465c(0x8002465c) 163[ 0.113186] [3: swapper/0: 1] sec_dt_addr_init: upload_cause addr : 0xffffff800002666c(0x8002666c) 164[ 0.113254] [3: swapper/0: 1] allocating 262152 bytes at ffffffc0f7c00000 (178380020 physical) for avc log 165[ 0.113262] [3: swapper/0: 1] sec_avc_log_init: no old log found 166[ 0.123590] [3: swapper/0: 1] qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch 167[ 0.124510] [3: swapper/0: 1] sps:sps is ready. 168[ 0.125210] [3: swapper/0: 1] i2c-msm-v2 75ba000.i2c: could not find pctldev for node /soc/pinctrl@01010000/s2mpb02_i2c/s2mpb02_i2c_active, deferring probe 169[ 0.125231] [3: swapper/0: 1] platform 75ba000.i2c: Driver i2c-msm-v2 requests probe deferral 170[ 0.125867] [3: swapper/0: 1] i2c-msm-v2 75b5000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_7/i2c_7_active, deferring probe 171[ 0.125884] [3: swapper/0: 1] platform 75b5000.i2c: Driver i2c-msm-v2 requests probe deferral 172[ 0.126128] [3: swapper/0: 1] i2c-msm-v2 75b6000.i2c: could not find pctldev for node /soc/pinctrl@01010000/i2c_8/i2c_8_active, deferring probe 173[ 0.126144] [3: swapper/0: 1] platform 75b6000.i2c: Driver i2c-msm-v2 requests probe deferral 174[ 0.127647] [3: swapper/0: 1] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed 175[ 0.127689] [3: swapper/0: 1] platform 6400000.qcom,cpu-clock-8996: Driver cpu-clock-8996 requests probe deferral 176[ 0.127861] [3: swapper/0: 1] platform 300000.qcom,gcc: Driver qcom,gcc-8996 requests probe deferral 177[ 0.128073] [3: swapper/0: 1] platform 8c0000.qcom,mmsscc: Driver qcom,mmsscc-8996 requests probe deferral 178[ 0.151899] [3: swapper/0: 1] smd_channel_probe_now: allocation table not initialized 179[ 0.152189] [3: swapper/0: 1] smd_channel_probe_now: allocation table not initialized 180[ 0.152461] [3: swapper/0: 1] smd_channel_probe_now: allocation table not initialized 181[ 0.152730] [3: swapper/0: 1] smd_channel_probe_now: allocation table not initialized 182[ 0.152975] [3: swapper/0: 1] msm_watchdog 9830000.qcom,wdt: wdog absent resource not present 183[ 0.153238] [3: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[0] @0x177ce0000 PA:0xffffffc0f7ce0000 184[ 0.153252] [3: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[1] @0x177ce0800 PA:0xffffffc0f7ce0800 185[ 0.153263] [3: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[2] @0x177ce1000 PA:0xffffffc0f7ce1000 186[ 0.153274] [3: swapper/0: 1] WDOG_V2 handled by TZ: for cpu[3] @0x177ce1800 PA:0xffffffc0f7ce1800 187[ 0.153307] [3: swapper/0: 1] msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized 188[ 0.154024] [3: swapper/0: 1] msm_rpm_dev_probe: APSS-RPM communication over GLINK 189[ 0.154449] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa1: Driver qcom,rpm-smd-regulator-resource requests probe deferral 190[ 0.154700] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa2: Driver qcom,rpm-smd-regulator-resource requests probe deferral 191[ 0.154907] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa3: Driver qcom,rpm-smd-regulator-resource requests probe deferral 192[ 0.155086] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa4: Driver qcom,rpm-smd-regulator-resource requests probe deferral 193[ 0.155263] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa5: Driver qcom,rpm-smd-regulator-resource requests probe deferral 194[ 0.155462] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-smpa7: Driver qcom,rpm-smd-regulator-resource requests probe deferral 195[ 0.155639] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa1: Driver qcom,rpm-smd-regulator-resource requests probe deferral 196[ 0.155812] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa2: Driver qcom,rpm-smd-regulator-resource requests probe deferral 197[ 0.155999] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa3: Driver qcom,rpm-smd-regulator-resource requests probe deferral 198[ 0.156188] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa4: Driver qcom,rpm-smd-regulator-resource requests probe deferral 199[ 0.156362] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa6: Driver qcom,rpm-smd-regulator-resource requests probe deferral 200[ 0.156559] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa8: Driver qcom,rpm-smd-regulator-resource requests probe deferral 201[ 0.156733] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa9: Driver qcom,rpm-smd-regulator-resource requests probe deferral 202[ 0.156903] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa10: Driver qcom,rpm-smd-regulator-resource requests probe deferral 203[ 0.157090] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa11: Driver qcom,rpm-smd-regulator-resource requests probe deferral 204[ 0.157262] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa12: Driver qcom,rpm-smd-regulator-resource requests probe deferral 205[ 0.157445] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa13: Driver qcom,rpm-smd-regulator-resource requests probe deferral 206[ 0.157632] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa14: Driver qcom,rpm-smd-regulator-resource requests probe deferral 207[ 0.157818] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa15: Driver qcom,rpm-smd-regulator-resource requests probe deferral 208[ 0.158002] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa16: Driver qcom,rpm-smd-regulator-resource requests probe deferral 209[ 0.158172] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa17: Driver qcom,rpm-smd-regulator-resource requests probe deferral 210[ 0.158341] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa18: Driver qcom,rpm-smd-regulator-resource requests probe deferral 211[ 0.158524] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa19: Driver qcom,rpm-smd-regulator-resource requests probe deferral 212[ 0.158693] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa20: Driver qcom,rpm-smd-regulator-resource requests probe deferral 213[ 0.158873] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa21: Driver qcom,rpm-smd-regulator-resource requests probe deferral 214[ 0.159065] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa22: Driver qcom,rpm-smd-regulator-resource requests probe deferral 215[ 0.159233] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa23: Driver qcom,rpm-smd-regulator-resource requests probe deferral 216[ 0.159397] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa24: Driver qcom,rpm-smd-regulator-resource requests probe deferral 217[ 0.159576] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa25: Driver qcom,rpm-smd-regulator-resource requests probe deferral 218[ 0.159742] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa26: Driver qcom,rpm-smd-regulator-resource requests probe deferral 219[ 0.159924] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa27: Driver qcom,rpm-smd-regulator-resource requests probe deferral 220[ 0.160162] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa28: Driver qcom,rpm-smd-regulator-resource requests probe deferral 221[ 0.160334] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa29: Driver qcom,rpm-smd-regulator-resource requests probe deferral 222[ 0.160527] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa30: Driver qcom,rpm-smd-regulator-resource requests probe deferral 223[ 0.160699] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-ldoa32: Driver qcom,rpm-smd-regulator-resource requests probe deferral 224[ 0.160862] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-vsa1: Driver qcom,rpm-smd-regulator-resource requests probe deferral 225[ 0.161040] [1: swapper/0: 1] platform soc:qcom,rpm-smd:rpm-regulator-vsa2: Driver qcom,rpm-smd-regulator-resource requests probe deferral 226[ 0.162877] [1: swapper/0: 1] spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000 227[ 0.164746] [1: swapper/0: 1] spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts 228[ 0.166420] [1: swapper/0: 1] spmi spm-regulator-ffffffc0f7d3c400: Driver qcom,spm-regulator requests probe deferral 229[ 0.166726] [1: swapper/0: 1] pm8004_s2: 400 <--> 1015 mV at 1000 mV normal idle 230[ 0.167726] [1: swapper/0: 1] platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000 231[ 0.168304] [1: swapper/0: 1] platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000 232[ 0.169037] [1: swapper/0: 1] platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000 233[ 0.169740] [1: swapper/0: 1] platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000 234[ 0.172787] [1: swapper/0: 1] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues 235[ 0.172813] [1: swapper/0: 1] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues 236[ 0.172834] [1: swapper/0: 1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues 237[ 0.172851] [1: swapper/0: 1] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues 238[ 0.172955] [1: swapper/0: 1] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe 239[ 0.172965] [1: swapper/0: 1] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. 240[ 0.172978] [1: swapper/0: 1] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues 241[ 0.172989] [1: swapper/0: 1] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 242[ 0.173019] [1: swapper/0: 1] platform 70000.qcom,msm-thermal: Driver msm-thermal requests probe deferral 243[ 0.180625] [0: kworker/0:0: 4] smd_channel_probe_now: allocation table not initialized 244[ 0.180798] [1:smem_native_rpm: 41] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests 245[ 0.181463] [2: swapper/0: 1] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts 246[ 0.181573] [2: swapper/0: 1] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts 247[ 0.181750] [2: swapper/0: 1] msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts 248[ 0.182040] [2: swapper/0: 1] msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts 249[ 0.183318] [2: swapper/0: 1] platform 99e8000.cpr3-ctrl: Driver qcom,cpr3-hmss-regulator requests probe deferral 250[ 0.183735] [2: swapper/0: 1] platform 838000.cpr3-ctrl: Driver qcom,cpr3-mmss-regulator requests probe deferral 251[ 0.184043] [2: swapper/0: 1] apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV 252[ 0.184432] [2: swapper/0: 1] apc1_perfcl_mem_acc_corner: 0 <--> 0 mV 253[ 0.184787] [2: swapper/0: 1] apcc_l3_mem_acc_corner: 0 <--> 0 mV 254[ 0.185166] [2: swapper/0: 1] gfx_mem_acc_corner: 0 <--> 0 mV 255[ 0.185592] [2: swapper/0: 1] kryo0-retention: 468 <--> 892 mV at 520 mV 256[ 0.185831] [2: swapper/0: 1] kryo0: 468 <--> 892 mV at 754 mV 257[ 0.185999] [2: swapper/0: 1] kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0 258[ 0.186320] [2: swapper/0: 1] kryo1-retention: 468 <--> 892 mV at 520 mV 259[ 0.186565] [2: swapper/0: 1] kryo1: 468 <--> 892 mV at 754 mV 260[ 0.186739] [2: swapper/0: 1] kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1 261[ 0.191151] [2: swapper/0: 1] platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000 262[ 0.192531] [2: swapper/0: 1] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 263[ 0.192556] [2: swapper/0: 1] platform 681b8.qcom,mpm: Driver mpm-v2 requests probe deferral 264[ 0.212618] [2: swapper/0: 1] __of_mpm_init(): MPM driver mapping exists 265[ 0.215200] [2: swapper/0: 1] i2c-msm-v2 7576000.i2c: probing driver i2c-msm-v2 266[ 0.215292] [2: swapper/0: 1] i2c-msm-v2 7576000.i2c: error on clk_get(core_clk):-517 267[ 0.215307] [2: swapper/0: 1] i2c-msm-v2 7576000.i2c: error probe() failed with err:-517 268[ 0.215341] [2: swapper/0: 1] platform 7576000.i2c: Driver i2c-msm-v2 requests probe deferral 269[ 0.216448] [2: swapper/0: 1] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2 270[ 0.216509] [2: swapper/0: 1] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517 271[ 0.216523] [2: swapper/0: 1] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517 272[ 0.216547] [2: swapper/0: 1] platform 75b7000.i2c: Driver i2c-msm-v2 requests probe deferral 273[ 0.219536] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 274[ 0.219608] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517 275[ 0.219623] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517 276[ 0.219652] [2: kworker/u8:0: 6] platform 75ba000.i2c: Driver i2c-msm-v2 requests probe deferral 277[ 0.219921] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 278[ 0.219975] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517 279[ 0.219988] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517 280[ 0.220010] [2: kworker/u8:0: 6] platform 75b5000.i2c: Driver i2c-msm-v2 requests probe deferral 281[ 0.220381] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 282[ 0.220439] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517 283[ 0.220451] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517 284[ 0.220473] [2: kworker/u8:0: 6] platform 75b6000.i2c: Driver i2c-msm-v2 requests probe deferral 285[ 0.220619] [2: kworker/u8:0: 6] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed 286[ 0.220649] [2: kworker/u8:0: 6] platform 6400000.qcom,cpu-clock-8996: Driver cpu-clock-8996 requests probe deferral 287[ 0.220921] [2: kworker/u8:0: 6] platform 300000.qcom,gcc: Driver qcom,gcc-8996 requests probe deferral 288[ 0.221048] [2: kworker/u8:0: 6] platform 8c0000.qcom,mmsscc: Driver qcom,mmsscc-8996 requests probe deferral 289[ 0.221429] [2: kworker/u8:0: 6] pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle 290[ 0.221905] [2: kworker/u8:0: 6] pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle 291[ 0.222314] [2: kworker/u8:0: 6] pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle 292[ 0.222826] [2: kworker/u8:0: 6] pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle 293[ 0.223215] [2: kworker/u8:0: 6] pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle 294[ 0.223699] [2: kworker/u8:0: 6] pm8994_s3: 1300 mV normal idle 295[ 0.224153] [2: kworker/u8:0: 6] pm8994_s4: 1800 mV normal idle 296[ 0.224621] [2: kworker/u8:0: 6] pm8994_s5: 2150 mV normal idle 297[ 0.225086] [2: kworker/u8:0: 6] pm8994_s7: 800 mV normal idle 298[ 0.225555] [2: kworker/u8:0: 6] pm8994_l1: 1000 mV normal idle 299[ 0.226015] [2: kworker/u8:0: 6] pm8994_l2: 1250 mV normal idle 300[ 0.226771] [2: kworker/u8:0: 6] pm8994_l3: 850 mV normal idle 301[ 0.227244] [2: kworker/u8:0: 6] pm8994_l4: 1225 mV normal idle 302[ 0.227725] [2: kworker/u8:0: 6] pm8994_l6: 1800 mV normal idle 303[ 0.228171] [2: kworker/u8:0: 6] pm8994_l8: 1800 mV normal idle 304[ 0.228640] [2: kworker/u8:0: 6] pm8994_l9: 1800 mV normal idle 305[ 0.229120] [2: kworker/u8:0: 6] pm8994_l10: 1800 mV normal idle 306[ 0.229581] [2: kworker/u8:0: 6] pm8994_l11: 1150 mV normal idle 307[ 0.230115] [2: kworker/u8:0: 6] pm8994_l12: 1800 mV normal idle 308[ 0.230981] [2: kworker/u8:0: 6] pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle 309[ 0.231457] [2: kworker/u8:0: 6] pm8994_l14: 1800 mV normal idle 310[ 0.231929] [2: kworker/u8:0: 6] pm8994_l15: 1800 mV normal idle 311[ 0.232382] [2: kworker/u8:0: 6] pm8994_l16: 2700 mV normal idle 312[ 0.232854] [2: kworker/u8:0: 6] pm8994_l17: 2800 mV normal idle 313[ 0.233316] [2: kworker/u8:0: 6] pm8994_l18: 3300 mV normal idle 314[ 0.233795] [2: kworker/u8:0: 6] pm8994_l19: 3300 mV normal idle 315[ 0.234249] [2: kworker/u8:0: 6] pm8994_l20: 2950 mV normal idle 316[ 0.234708] [2: kworker/u8:0: 6] pm8994_l21: 2950 mV normal idle 317[ 0.235183] [2: kworker/u8:0: 6] pm8994_l22: 3050 mV normal idle 318[ 0.235663] [2: kworker/u8:0: 6] pm8994_l23: 2800 mV normal idle 319[ 0.236095] [2: kworker/u8:0: 6] pm8994_l24: 3075 mV normal idle 320[ 0.236583] [2: kworker/u8:0: 6] pm8994_l25: 1200 mV normal idle 321[ 0.237347] [2: kworker/u8:0: 6] pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle 322[ 0.237763] [2: kworker/u8:0: 6] pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle 323[ 0.238540] [2: kworker/u8:0: 6] pm8994_l27: 1100 mV normal idle 324[ 0.239039] [2: kworker/u8:0: 6] pm8994_l28: 925 mV normal idle 325[ 0.239987] [2: kworker/u8:0: 6] pm8994_l29: 2800 mV normal idle 326[ 0.240502] [2: kworker/u8:0: 6] pm8994_l30: 1800 mV normal idle 327[ 0.240972] [2: kworker/u8:0: 6] pm8994_l32: 1800 mV normal idle 328[ 0.241436] [2: kworker/u8:0: 6] pm8994_lvs1: no parameters 329[ 0.241861] [2: kworker/u8:0: 6] pm8994_lvs2: no parameters 330[ 0.242211] [2: kworker/u8:0: 6] pm8994_s11: 470 <--> 1140 mV at 905 mV normal idle 331[ 0.242458] [2: kworker/u8:0: 6] pm8994_s11_avs_limit: 470 <--> 1140 mV 332[ 0.242608] [2: kworker/u8:0: 6] spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us 333[ 0.243471] [2: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues 334[ 0.243490] [2: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues 335[ 0.243502] [2: kworker/u8:0: 6] msm_thermal:sensor_mgr_init_threshold threshold id already initialized 336[ 0.243519] [2: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues 337[ 0.243535] [2: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues 338[ 0.243851] [2: kworker/u8:0: 6] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe 339[ 0.243863] [2: kworker/u8:0: 6] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. 340[ 0.243877] [2: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues 341[ 0.243890] [2: kworker/u8:0: 6] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 342[ 0.243968] [2: kworker/u8:0: 6] platform 70000.qcom,msm-thermal: Driver msm-thermal requests probe deferral 343[ 0.244302] [2: kworker/u8:0: 6] platform 99e8000.cpr3-ctrl: Driver qcom,cpr3-hmss-regulator requests probe deferral 344[ 0.244554] [2: kworker/u8:0: 6] platform 838000.cpr3-ctrl: Driver qcom,cpr3-mmss-regulator requests probe deferral 345[ 0.244638] [2: kworker/u8:0: 6] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 346[ 0.244656] [2: kworker/u8:0: 6] platform 681b8.qcom,mpm: Driver mpm-v2 requests probe deferral 347[ 0.245149] [2: kworker/u8:0: 6] i2c-msm-v2 7576000.i2c: probing driver i2c-msm-v2 348[ 0.245222] [2: kworker/u8:0: 6] i2c-msm-v2 7576000.i2c: error on clk_get(core_clk):-517 349[ 0.245236] [2: kworker/u8:0: 6] i2c-msm-v2 7576000.i2c: error probe() failed with err:-517 350[ 0.245263] [2: kworker/u8:0: 6] platform 7576000.i2c: Driver i2c-msm-v2 requests probe deferral 351[ 0.245536] [2: kworker/u8:0: 6] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2 352[ 0.245592] [2: kworker/u8:0: 6] i2c-msm-v2 75b7000.i2c: error on clk_get(core_clk):-517 353[ 0.245605] [2: kworker/u8:0: 6] i2c-msm-v2 75b7000.i2c: error probe() failed with err:-517 354[ 0.245626] [2: kworker/u8:0: 6] platform 75b7000.i2c: Driver i2c-msm-v2 requests probe deferral 355[ 0.245903] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 356[ 0.245957] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: error on clk_get(core_clk):-517 357[ 0.245969] [2: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: error probe() failed with err:-517 358[ 0.245990] [2: kworker/u8:0: 6] platform 75ba000.i2c: Driver i2c-msm-v2 requests probe deferral 359[ 0.246253] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 360[ 0.246305] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: error on clk_get(core_clk):-517 361[ 0.246316] [2: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: error probe() failed with err:-517 362[ 0.246337] [2: kworker/u8:0: 6] platform 75b5000.i2c: Driver i2c-msm-v2 requests probe deferral 363[ 0.246615] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 364[ 0.246669] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: error on clk_get(core_clk):-517 365[ 0.246680] [2: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: error probe() failed with err:-517 366[ 0.246701] [2: kworker/u8:0: 6] platform 75b6000.i2c: Driver i2c-msm-v2 requests probe deferral 367[ 0.246917] [2: kworker/u8:0: 6] cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed 368[ 0.246987] [2: kworker/u8:0: 6] platform 6400000.qcom,cpu-clock-8996: Driver cpu-clock-8996 requests probe deferral 369[ 0.269390] [3: kworker/u8:0: 6] qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks. 370[ 0.270381] [3: kworker/u8:0: 6] vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0 371[ 0.270399] [3: kworker/u8:0: 6] vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0 372[ 0.270412] [3: kworker/u8:0: 6] vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0 373[ 0.270627] [3: kworker/u8:0: 6] vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1 374[ 0.270640] [3: kworker/u8:0: 6] vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1 375[ 0.270652] [3: kworker/u8:0: 6] vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1 376[ 0.270893] [3: kworker/u8:0: 6] cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp 377[ 0.270907] [3: kworker/u8:0: 6] cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp 378[ 0.270916] [3: kworker/u8:0: 6] cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp 379[ 0.281922] [3: kworker/u8:0: 6] qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks. 380[ 0.282420] [3: kworker/u8:0: 6] platform 8c0000.qcom,gpucc: Driver qcom,gpucc-8996 requests probe deferral 381[ 0.284184] [3: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues 382[ 0.284205] [3: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues 383[ 0.284217] [3: kworker/u8:0: 6] msm_thermal:sensor_mgr_init_threshold threshold id already initialized 384[ 0.284233] [3: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues 385[ 0.284248] [3: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues 386[ 0.284468] [3: kworker/u8:0: 6] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe 387[ 0.284481] [3: kworker/u8:0: 6] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. 388[ 0.284495] [3: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues 389[ 0.284505] [3: kworker/u8:0: 6] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 390[ 0.284582] [3: kworker/u8:0: 6] platform 70000.qcom,msm-thermal: Driver msm-thermal requests probe deferral 391[ 0.285030] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0 392[ 0.285042] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6 393[ 0.285052] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N 394[ 0.285062] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none 395[ 0.285072] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none 396[ 0.285084] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 397[ 0.285270] [3: kworker/u8:0: 6] cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV 398[ 0.285428] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 575000 uV 399[ 0.285439] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 685000 uV 400[ 0.285448] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 805000 uV 401[ 0.285457] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 930000 uV 402[ 0.285543] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 306 403[ 0.285554] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 496, quot_offset[ 7]= 150 404[ 0.285564] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 721, quot_offset[ 7]= 225 405[ 0.285574] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 930, quot_offset[ 7]= 205 406[ 0.285702] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0 407[ 0.285712] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6 408[ 0.285722] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N 409[ 0.285731] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none 410[ 0.285740] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none 411[ 0.285751] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 412[ 0.285882] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 575000 uV 413[ 0.285893] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 685000 uV 414[ 0.285901] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 805000 uV 415[ 0.285910] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 930000 uV 416[ 0.285955] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 306 417[ 0.285966] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 496, quot_offset[ 7]= 150 418[ 0.285976] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 721, quot_offset[ 7]= 225 419[ 0.285985] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 930, quot_offset[ 7]= 205 420[ 0.286085] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0 421[ 0.286094] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6 422[ 0.286103] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N 423[ 0.286112] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none 424[ 0.286121] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none 425[ 0.286132] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4 426[ 0.286342] [3: kworker/u8:0: 6] cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV 427[ 0.286533] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 575000 uV 428[ 0.286543] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 665000 uV 429[ 0.286553] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 725000 uV 430[ 0.286561] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 990000 uV 431[ 0.286675] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 308 432[ 0.286685] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 456, quot_offset[ 7]= 110 433[ 0.286694] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 570, quot_offset[ 7]= 110 434[ 0.286704] [3: kworker/u8:0: 6] cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1019, quot_offset[ 7]= 445 435[ 0.287165] [3: kworker/u8:0: 6] cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop 436[ 0.287323] [3: kworker/u8:0: 6] apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV 437[ 0.287567] [3: kworker/u8:0: 6] apc0_cbf_corner: 0 <--> 0 mV at 0 mV 438[ 0.288117] [3: kworker/u8:0: 6] apc1_corner: 0 <--> 0 mV at 0 mV 439[ 0.289909] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4 440[ 0.289925] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none 441[ 0.290331] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV 442[ 0.290343] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 685000 uV 443[ 0.290352] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 815000 uV 444[ 0.290362] [2: kworker/u8:0: 6] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 915000 uV 445[ 0.290527] [2: kworker/u8:0: 6] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop 446[ 0.290670] [2: kworker/u8:0: 6] gfx_corner: 0 <--> 0 mV at 0 mV 447[ 0.292076] [2: kworker/u8:0: 6] i2c-msm-v2 7576000.i2c: probing driver i2c-msm-v2 448[ 0.292165] [2: kworker/u8:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 449[ 0.292177] [2: kworker/u8:0: 6] i2c-msm-v2 7576000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) 450[ 0.295403] [1: kworker/u8:0: 6] i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2 451[ 0.295536] [1: kworker/u8:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 452[ 0.295550] [1: kworker/u8:0: 6] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 453[ 0.297242] [1: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 454[ 0.297368] [1: kworker/u8:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 455[ 0.297381] [1: kworker/u8:0: 6] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 456[ 0.299349] [1: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 457[ 0.299462] [1: kworker/u8:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 458[ 0.299475] [1: kworker/u8:0: 6] i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 459[ 0.300479] [1: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 460[ 0.300589] [1: kworker/u8:0: 6] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. 461[ 0.300601] [1: kworker/u8:0: 6] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) 462[ 0.303147] [1: kworker/u8:0: 6] cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0 463[ 0.305310] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu0 464[ 0.305369] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on cpu0 465[ 0.305390] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu1 466[ 0.305422] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on cpu1 467[ 0.305441] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu2 468[ 0.305502] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (2150400000 Hz, 975000 uv) on cpu2 469[ 0.305521] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (307200000 Hz, 595000 uv) on cpu3 470[ 0.305578] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (2150400000 Hz, 975000 uv) on cpu3 471[ 0.305716] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (307200000 Hz, 620000 uv) on soc:qcom,m4m 472[ 0.305756] [1: kworker/u8:0: 6] clock-cpu-8996: set OPP pair (1593600000 Hz, 905000 uv) on soc:qcom,m4m 473[ 0.306254] [1: kworker/u8:0: 6] qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0 474[ 0.306674] [1: kworker/u8:0: 6] gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0 475[ 0.306722] [1: kworker/u8:0: 6] gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 915000 uV) on b00000.qcom,kgsl-3d0 476[ 0.308301] [1: kworker/u8:0: 6] qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks. 477[ 0.309139] [1: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues 478[ 0.309160] [1: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues 479[ 0.309172] [1: kworker/u8:0: 6] msm_thermal:sensor_mgr_init_threshold threshold id already initialized 480[ 0.309188] [1: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues 481[ 0.309204] [1: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues 482[ 0.309566] [1: kworker/u8:0: 6] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 483[ 0.309582] [1: kworker/u8:0: 6] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 484[ 0.309594] [1: kworker/u8:0: 6] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 485[ 0.309617] [1: kworker/u8:0: 6] msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues 486[ 0.310690] [1: kworker/1:0: 13] msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19 487[ 0.310707] [1: kworker/1:0: 13] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 488[ 0.310718] [1: kworker/1:0: 13] msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19 489[ 0.311696] [2: swapper/0: 1] ------------[ cut here ]------------ 490[ 0.311721] [2: swapper/0: 1] WARNING: CPU: 2 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80() 491[ 0.311732] [2: swapper/0: 1] sysfs: cannot create duplicate filename '/module/radio_i2c_rtc6213n/version' 492[ 0.311740] [2: swapper/0: 1] Modules linked in: 493[ 0.311754] [2: swapper/0: 1] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 494[ 0.311763] [2: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 495[ 0.311772] [2: swapper/0: 1] Call trace: 496[ 0.311788] [2: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 497[ 0.311799] [2: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 498[ 0.311813] [2: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 499[ 0.311826] [2: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 500[ 0.311836] [2: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 501[ 0.311846] [2: swapper/0: 1] [<ffffffc0002840f8>] sysfs_warn_dup+0x64/0x80 502[ 0.311855] [2: swapper/0: 1] [<ffffffc000283e70>] sysfs_add_file_mode_ns+0x108/0x144 503[ 0.311865] [2: swapper/0: 1] [<ffffffc000283edc>] sysfs_create_file_ns+0x30/0x3c 504[ 0.311875] [2: swapper/0: 1] [<ffffffc00147e8ec>] param_sysfs_init+0xa8/0x1c8 505[ 0.311885] [2: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 506[ 0.311898] [2: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 507[ 0.311908] [2: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 508[ 0.311917] [2: swapper/0: 1] ---[ end trace a24c810b3f7fdce7 ]--- 509[ 0.336426] [2: swapper/0: 1] sec_getlog_supply_kloginfo: 0xffffffc001c054f0 510[ 0.336621] [2: swapper/0: 1] printk_remap_nocache: nocache_base printk virtual addrs 0xffffff8002000000 phy=0x85200000 511[ 0.573603] [2: swapper/0: 1] printk_remap_nocache: saved old log at 524288@ffffffc0f7900000 512[ 0.577562] [2: swapper/0: 1] KPI: Bootloader start count = 24533 513[ 0.577632] [2: swapper/0: 1] KPI: Bootloader end count = 66812 514[ 0.577692] [2: swapper/0: 1] KPI: Bootloader display count = 36111 515[ 0.577754] [2: swapper/0: 1] KPI: Bootloader load kernel count = 2460 516[ 0.577817] [2: swapper/0: 1] KPI: Kernel MPM timestamp = 92699 517[ 0.577874] [2: swapper/0: 1] KPI: Kernel MPM Clock frequency = 32768 518[ 0.577952] [2: swapper/0: 1] socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=8, hw_plat_ver=65536 519[ 0.577952] [2: swapper/0: 1] accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=1501011543 num_pmics=2 520[ 0.578430] [2: swapper/0: 1] gdsc_mmagic_bimc: no parameters 521[ 0.579148] [2: swapper/0: 1] rome_vreg: no parameters 522[ 0.580487] [2: swapper/0: 1] vgaarb: loaded 523[ 0.580546] [2: swapper/0: 1] max77833:max77833_i2c_init 524[ 0.580659] [2: swapper/0: 1] max77854:max77854_i2c_init 525[ 0.582067] [2: swapper/0: 1] SCSI subsystem initialized 526[ 0.582396] [2: swapper/0: 1] usbcore: registered new interface driver usbfs 527[ 0.582511] [2: swapper/0: 1] usbcore: registered new interface driver hub 528[ 0.582746] [1: swapper/0: 1] usbcore: registered new device driver usb 529[ 0.583266] [1: swapper/0: 1] soc:usb_nop_phy supply vcc not found, using dummy regulator 530[ 0.588088] [1: swapper/0: 1] max77838_regulator_probe: <max77838> probe start 531[ 0.589754] [1: swapper/0: 1] max77838-ldo1: 600 <--> 3775 mV at 1800 mV 532[ 0.592579] [1: swapper/0: 1] max77838-ldo2: 600 <--> 3775 mV at 600 mV 533[ 0.596006] [1: swapper/0: 1] max77838-ldo3: 600 <--> 3775 mV at 3000 mV 534[ 0.598732] [1: swapper/0: 1] max77838-ldo4: 600 <--> 3775 mV at 600 mV 535[ 0.602205] [1: swapper/0: 1] max77838-buck: 500 <--> 2093 mV at 1600 mV 536[ 0.605355] [1: swapper/0: 1] max77838_regulator_probe: <max77838> probe end 537[ 0.605445] [1: swapper/0: 1] i2c-gpio soc:i2c@21: using pins 16 (SDA) and 29 (SCL) 538[ 0.606462] [1: swapper/0: 1] i2c-gpio soc:i2c@14: using pins 47 (SDA) and 48 (SCL) 539[ 0.607816] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 540[ 0.607899] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 541[ 0.607989] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 542[ 0.608061] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 543[ 0.608146] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 544[ 0.608218] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 545[ 0.608303] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 546[ 0.608372] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 547[ 0.608454] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 548[ 0.608523] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 549[ 0.608605] [1: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 550[ 0.608674] [1: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 551[ 0.608784] [1: swapper/0: 1] max77854:max77854_i2c_probe 552[ 0.608924] [1: swapper/0: 1] of_max77854_dt: irq-gpio: 38 553[ 0.609746] [1: swapper/0: 1] max77854:max77854_i2c_probe device found: rev.0x2, ver.0x0 554[ 0.610526] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 555[ 0.610612] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 556[ 0.610705] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 557[ 0.610781] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 558[ 0.610871] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 559[ 0.610946] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 560[ 0.611036] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 561[ 0.611110] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 562[ 0.611201] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 563[ 0.611274] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 564[ 0.611362] [2: swapper/0: 1] pinmux core: 1010000.pinctrl does not support function NA 565[ 0.611435] [2: swapper/0: 1] msm8996-pinctrl 1010000.pinctrl: invalid function NA in map table 566[ 0.611530] [2: swapper/0: 1] max77854:max77854_i2c_probe max77854 pinctrl is succeed. 567[ 0.613080] [2: swapper/0: 1] max77854:max77854_irq_init irq=271, irq->gpio=38 568[ 0.700370] [2: swapper/0: 1] max77854:max77854_irq_init max77854_PMIC_REG_INTSRC_MASK=0xf2 569[ 0.701259] [2: swapper/0: 1] i2c-gpio soc:i2c@13: using pins 33 (SDA) and 32 (SCL) 570[ 0.702237] [0: swapper/0: 1] i2c-gpio soc:i2c@22: using pins 21 (SDA) and 22 (SCL) 571[ 0.703419] [0: swapper/0: 1] i2c-gpio soc:i2c@18: using pins 41 (SDA) and 80 (SCL) 572[ 0.704649] [0: swapper/0: 1] i2c-gpio soc:i2c@64: using pins 45 (SDA) and 23 (SCL) 573[ 0.704897] [0: swapper/0: 1] media: Linux media interface: v0.10 574[ 0.705004] [0: swapper/0: 1] Linux video capture interface: v2.00 575[ 0.705996] [0: swapper/0: 1] msm-cpufreq soc:qcom,msm-cpufreq: Fail to get cpufreq-boot-limit node 576[ 0.707842] [0: swapper/0: 1] cpufreq: driver msm up and running 577[ 0.708730] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region 578[ 0.709357] [0: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region 579[ 0.710351] [2: swapper/0: 1] platform soc:qcom,ion:qcom,ion-heap@30: assigned reserved memory node camera_mem_region@0xC0000000 580[ 0.710755] [2: swapper/0: 1] ION heap system created 581[ 0.710939] [3: swapper/0: 1] ION heap kmalloc created 582[ 0.710986] [3: swapper/0: 1] ION heap qsecom created at 0x00000000fe800000 with size 1400000 583[ 0.711049] [3: swapper/0: 1] ION heap secure_display created at 0x00000000f8c00000 with size 5c00000 584[ 0.711114] [3: swapper/0: 1] ION heap secure_heap created 585[ 0.763796] [3: swapper/0: 1] ION heap camera_preview created at 0x00000000c0000000 with size 14800000 586[ 0.764897] [1: swapper/0: 1] msm_bus_fabric_init_driver 587[ 0.765194] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 6145 588[ 0.765486] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 589[ 0.765565] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 6146 590[ 0.765752] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 591[ 0.765832] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 6147 592[ 0.766046] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 593[ 0.766128] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 0 594[ 0.766296] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 595[ 0.766375] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 5120 596[ 0.766456] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 5120 597[ 0.766540] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 2048 598[ 0.766937] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 599[ 0.767028] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 2049 600[ 0.767109] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Coresight support absent for bus: 2049 601[ 0.767188] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 4096 602[ 0.767353] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 603[ 0.767431] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: Dev 1024 604[ 0.767615] [1: swapper/0: 1] msm_bus_device 520000.ad-hoc-bus: msmbus_coresight initialized 605[ 0.770611] [2: swapper/0: 1] msm-bus-type fab-a0noc: Error: Failed to get reg bus-gdsc 606[ 0.770668] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6145 ctx 0 607[ 0.770724] [2: swapper/0: 1] msm-bus-type fab-a0noc: Error: Failed to get reg bus-a-gdsc 608[ 0.770779] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6145 ctx 1 609[ 0.770867] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6146 ctx 0 610[ 0.770918] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6146 ctx 1 611[ 0.771013] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6147 ctx 0 612[ 0.771063] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 6147 ctx 1 613[ 0.771115] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[0] node 6147 3 Reg 614[ 0.771166] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[1] node 6147 3 Reg 615[ 0.771217] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[2] node 6147 3 Reg 616[ 0.771307] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 0 ctx 0 617[ 0.771356] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 0 ctx 1 618[ 0.771461] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 5120 ctx 0 619[ 0.771511] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 5120 ctx 1 620[ 0.771599] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 2048 ctx 0 621[ 0.771648] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 2048 ctx 1 622[ 0.771699] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[0] node 2048 8 Regmmagic-ahb-no-rate 623[ 0.771757] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[1] node 2048 8 Reg 624[ 0.771809] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[2] node 2048 8 Regmmagic-mdss-axi-no-rate 625[ 0.771870] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[3] node 2048 8 Reg 626[ 0.771921] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[4] node 2048 8 Regmmagic-camss-axi-no-rate 627[ 0.771982] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[5] node 2048 8 Reg 628[ 0.772031] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[6] node 2048 8 Regmmagic-video-axi-no-rate 629[ 0.772093] [2: swapper/0: 1] msm_bus_init_clk: Valid qos clk[7] node 2048 8 Reg 630[ 0.772234] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 2049 ctx 0 631[ 0.772303] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 2049 ctx 1 632[ 0.772397] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 4096 ctx 0 633[ 0.772448] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 4096 ctx 1 634[ 0.772545] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 1024 ctx 0 635[ 0.772595] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 1024 ctx 1 636[ 0.774019] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 10061 ctx 0 637[ 0.775607] [2: swapper/0: 1] msm-bus-type slv-vmem-cfg: Error: Failed to get reg node-gdsc 638[ 0.775665] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 708 ctx 0 639[ 0.776203] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 10028 ctx 0 640[ 0.776286] [2: swapper/0: 1] msm-bus-type slv-vmem: Error: Failed to get reg node-gdsc 641[ 0.776340] [2: swapper/0: 1] msm_bus_init_clk: Valid node clk node 710 ctx 0 642[ 0.782462] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 643[ 0.782526] [2: swapper/0: 1] msm-bus-type fab-mnoc: 644[ 0.782526] [2: swapper/0: 1] Failed to get reg -517 645[ 0.782598] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 646[ 0.782658] [2: swapper/0: 1] Can't Enable QoS clk 106<3>[ 0.782706] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 647[ 0.782766] [2: swapper/0: 1] msm-bus-type fab-mnoc: 648[ 0.782766] [2: swapper/0: 1] Failed to get reg -517 649[ 0.782837] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 650[ 0.782897] [2: swapper/0: 1] Can't Enable QoS clk 62<3>[ 0.782943] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 651[ 0.783004] [2: swapper/0: 1] msm-bus-type fab-mnoc: 652[ 0.783004] [2: swapper/0: 1] Failed to get reg -517 653[ 0.783076] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 654[ 0.783133] [2: swapper/0: 1] Can't Enable QoS clk 22<3>[ 0.783180] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 655[ 0.783240] [2: swapper/0: 1] msm-bus-type fab-mnoc: 656[ 0.783240] [2: swapper/0: 1] Failed to get reg -517 657[ 0.783312] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 658[ 0.783370] [2: swapper/0: 1] Can't Enable QoS clk 23<3>[ 0.783417] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 659[ 0.783477] [2: swapper/0: 1] msm-bus-type fab-mnoc: 660[ 0.783477] [2: swapper/0: 1] Failed to get reg -517 661[ 0.783548] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 662[ 0.783604] [2: swapper/0: 1] Can't Enable QoS clk 25<3>[ 0.783650] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 663[ 0.783710] [2: swapper/0: 1] msm-bus-type fab-mnoc: 664[ 0.783710] [2: swapper/0: 1] Failed to get reg -517 665[ 0.783781] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 666[ 0.783839] [2: swapper/0: 1] Can't Enable QoS clk 63<3>[ 0.783884] [2: swapper/0: 1] msm-bus-type fab-mnoc: Error: Failed to get reg mmagic-mdss-axi-no-rate 667[ 0.783944] [2: swapper/0: 1] msm-bus-type fab-mnoc: 668[ 0.783944] [2: swapper/0: 1] Failed to get reg -517 669[ 0.784016] [2: swapper/0: 1] msm_bus_enable_node_qos_clk: Failed to set Qos Clks ret -517 670[ 0.784074] [2: swapper/0: 1] Can't Enable QoS clk 29<6>[ 0.785547] [2: swapper/0: 1] PMIC@SID0: PM8994 v2.0 options: 3, 0, 2, 2 671[ 0.785694] [2: swapper/0: 1] PMIC@SID4: PM8004 v1.0 options: 0, 0, 0, 0 672[ 0.786666] [2: swapper/0: 1] ipa ipa_uc_state_check:291 uC interface not initialized 673[ 0.786726] [2: swapper/0: 1] ipa ipa_sps_irq_control_all:905 EP (2) not allocated. 674[ 0.786780] [2: swapper/0: 1] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 675[ 0.789259] [3: swapper/0: 1] sps:BAM 0x0000000000684000 is registered. 676[ 0.790352] [3: swapper/0: 1] ipa ipa_uc_state_check:291 uC interface not initialized 677[ 0.790732] [3: swapper/0: 1] sps:BAM 0x0000000000684000 (va:0xffffff8000ec0000) enabled: ver:0x27, number of pipes:20 678[ 0.792700] [3: swapper/0: 1] ipa ipa_uc_state_check:291 uC interface not initialized 679[ 0.805120] [3: swapper/0: 1] ipa ipa_uc_state_check:291 uC interface not initialized 680[ 0.807196] [3: swapper/0: 1] IPA driver initialization was successful. 681[ 0.808809] [3: swapper/0: 1] gdsc_mmagic_video: no parameters 682[ 0.809213] [3: swapper/0: 1] gdsc_mmagic_mdss: no parameters 683[ 0.809525] [3: swapper/0: 1] gdsc_mmagic_camss: no parameters 684[ 0.809922] [3: swapper/0: 1] gdsc_venus: no parameters 685[ 0.810191] [3: swapper/0: 1] gdsc_venus: supplied by gdsc_mmagic_video 686[ 0.810547] [3: swapper/0: 1] gdsc_venus_core0: fast normal 687[ 0.810885] [3: swapper/0: 1] gdsc_venus_core1: fast normal 688[ 0.811192] [3: swapper/0: 1] gdsc_camss_top: no parameters 689[ 0.811335] [3: swapper/0: 1] gdsc_camss_top: supplied by gdsc_mmagic_camss 690[ 0.811707] [3: swapper/0: 1] gdsc_vfe0: no parameters 691[ 0.811847] [3: swapper/0: 1] gdsc_vfe0: supplied by gdsc_camss_top 692[ 0.812213] [3: swapper/0: 1] gdsc_vfe1: no parameters 693[ 0.812353] [3: swapper/0: 1] gdsc_vfe1: supplied by gdsc_camss_top 694[ 0.812705] [3: swapper/0: 1] gdsc_mdss: no parameters 695[ 0.812844] [3: swapper/0: 1] gdsc_mdss: supplied by gdsc_mmagic_mdss 696[ 0.813315] [3: swapper/0: 1] gdsc_jpeg: no parameters 697[ 0.813455] [3: swapper/0: 1] gdsc_jpeg: supplied by gdsc_camss_top 698[ 0.813836] [3: swapper/0: 1] gdsc_cpp: no parameters 699[ 0.813975] [3: swapper/0: 1] gdsc_cpp: supplied by gdsc_camss_top 700[ 0.814296] [3: swapper/0: 1] gdsc_pcie_0: no parameters 701[ 0.814609] [3: swapper/0: 1] gdsc_pcie_1: no parameters 702[ 0.814899] [3: swapper/0: 1] gdsc_pcie_2: no parameters 703[ 0.815194] [3: swapper/0: 1] gdsc_usb30: no parameters 704[ 0.815495] [3: swapper/0: 1] gdsc_ufs: no parameters 705[ 0.815840] [3: swapper/0: 1] gdsc_fd: no parameters 706[ 0.815984] [3: swapper/0: 1] gdsc_fd: supplied by gdsc_camss_top 707[ 0.816279] [3: swapper/0: 1] gdsc_gpu: no parameters 708[ 0.816640] [3: swapper/0: 1] gdsc_gpu_gx: no parameters 709[ 0.817060] [3: swapper/0: 1] gdsc_gpu_gx: supplied by gfx_corner 710[ 0.817384] [3: swapper/0: 1] gdsc_hlos1_vote_aggre0_noc: no parameters 711[ 0.817716] [3: swapper/0: 1] gdsc_hlos1_vote_lpass_adsp: no parameters 712[ 0.818022] [3: swapper/0: 1] gdsc_hlos1_vote_lpass_core: no parameters 713[ 0.818350] [3: swapper/0: 1] gdsc_aggre0_noc: no parameters 714[ 0.821008] [3: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL 715[ 0.822626] [3: swapper/0: 1] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully 716[ 0.822876] [3: swapper/0: 1] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL 717[ 0.833135] [3: swapper/0: 1] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock 718[ 0.833775] [3: swapper/0: 1] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully 719[ 0.845903] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: registered 3 master devices 720[ 0.847034] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: option qcom,register-save 721[ 0.847218] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: option qcom,skip-init 722[ 0.847396] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: option qcom,fatal-asf 723[ 0.848445] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: probing hardware configuration... 724[ 0.848643] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: SMMUv2 with: 725[ 0.848878] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: stage 1 translation 726[ 0.849050] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: address translation ops 727[ 0.849229] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: coherent table walk 728[ 0.849486] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: stream matching with 3 register groups, mask 0x7fff 729[ 0.849749] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: 3 context banks (0 stage-2 only) 730[ 0.849971] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: Supported page sizes: 0x62215000 731[ 0.850329] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: Stage-1: 32-bit VA -> 36-bit IPA 732[ 0.850655] [3: swapper/0: 1] arm-smmu d80000.arm,smmu-jpeg: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts. 733[ 0.858206] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: registered 2 master devices 734[ 0.858917] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: option qcom,register-save 735[ 0.859099] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: option qcom,skip-init 736[ 0.859284] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: option qcom,dynamic 737[ 0.859527] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: probing hardware configuration... 738[ 0.859726] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: SMMUv2 with: 739[ 0.859962] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: stage 1 translation 740[ 0.860349] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: address translation ops 741[ 0.860532] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: coherent table walk 742[ 0.860790] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: stream matching with 2 register groups, mask 0x7fff 743[ 0.861056] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: 2 context banks (0 stage-2 only) 744[ 0.861290] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: Supported page sizes: 0x62215000 745[ 0.861490] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: Stage-1: 36-bit VA -> 36-bit IPA 746[ 0.861820] [3: swapper/0: 1] arm-smmu b40000.arm,smmu-kgsl: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. 747[ 0.869395] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: registered 1 master devices 748[ 0.870795] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: option qcom,register-save 749[ 0.870977] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: option qcom,skip-init 750[ 0.871152] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: option qcom,fatal-asf 751[ 0.871731] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: probing hardware configuration... 752[ 0.871924] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: SMMUv2 with: 753[ 0.872165] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: stage 1 translation 754[ 0.872334] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: address translation ops 755[ 0.872512] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: coherent table walk 756[ 0.872778] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: stream matching with 4 register groups, mask 0x7fff 757[ 0.873040] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: 2 context banks (0 stage-2 only) 758[ 0.873267] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: Supported page sizes: 0x62215000 759[ 0.873459] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: Stage-1: 32-bit VA -> 36-bit IPA 760[ 0.873785] [3: swapper/0: 1] arm-smmu da0000.arm,smmu-vfe: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. 761[ 0.881772] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: registered 5 master devices 762[ 0.882957] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: option qcom,register-save 763[ 0.883148] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: option qcom,skip-init 764[ 0.883746] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: probing hardware configuration... 765[ 0.883943] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: SMMUv2 with: 766[ 0.884219] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: stage 1 translation 767[ 0.884394] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: address translation ops 768[ 0.884574] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: coherent table walk 769[ 0.884879] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups, mask 0x7fff 770[ 0.885168] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only) 771[ 0.885396] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x62215000 772[ 0.885594] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA 773[ 0.885920] [3: swapper/0: 1] arm-smmu d40000.arm,smmu-venus: found 11 context interrupt(s) but have 7 context banks. assuming 7 context interrupts. 774[ 0.893867] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: registered 2 master devices 775[ 0.895122] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: option qcom,register-save 776[ 0.895306] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: option qcom,skip-init 777[ 0.895482] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: option qcom,no-smr-check 778[ 0.896156] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: probing hardware configuration... 779[ 0.896351] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: SMMUv2 with: 780[ 0.896587] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: stage 1 translation 781[ 0.896759] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: address translation ops 782[ 0.896935] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: coherent table walk 783[ 0.897107] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: stream matching with 2 register groups, mask 0xffffffc0 784[ 0.897377] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: 2 context banks (0 stage-2 only) 785[ 0.897599] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: Supported page sizes: 0x62215000 786[ 0.897793] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: Stage-1: 32-bit VA -> 36-bit IPA 787[ 0.898001] [3: swapper/0: 1] arm-smmu d00000.arm,smmu-mdp: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. 788[ 0.905792] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: registered 2 master devices 789[ 0.906983] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: option qcom,register-save 790[ 0.907165] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: option qcom,skip-init 791[ 0.907853] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: probing hardware configuration... 792[ 0.908046] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: SMMUv2 with: 793[ 0.908291] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: stage 1 translation 794[ 0.908465] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: address translation ops 795[ 0.908647] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: coherent table walk 796[ 0.908915] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: stream matching with 2 register groups, mask 0x7fff 797[ 0.909184] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: 2 context banks (0 stage-2 only) 798[ 0.909412] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: Supported page sizes: 0x62215000 799[ 0.909610] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: Stage-1: 32-bit VA -> 36-bit IPA 800[ 0.909832] [3: swapper/0: 1] arm-smmu d20000.arm,smmu-rot: found 4 context interrupt(s) but have 2 context banks. assuming 2 context interrupts. 801[ 0.917536] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: registered 2 master devices 802[ 0.918726] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: option qcom,register-save 803[ 0.918911] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: option qcom,skip-init 804[ 0.919090] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: option qcom,fatal-asf 805[ 0.919685] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: probing hardware configuration... 806[ 0.919882] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: SMMUv2 with: 807[ 0.920331] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: stage 1 translation 808[ 0.920505] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: address translation ops 809[ 0.920686] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: coherent table walk 810[ 0.920944] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: stream matching with 2 register groups, mask 0x7fff 811[ 0.921205] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: 3 context banks (0 stage-2 only) 812[ 0.921435] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: Supported page sizes: 0x62215000 813[ 0.921638] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: Stage-1: 32-bit VA -> 36-bit IPA 814[ 0.921970] [3: swapper/0: 1] arm-smmu d60000.arm,smmu-cpp_fd: found 4 context interrupt(s) but have 3 context banks. assuming 3 context interrupts. 815[ 0.929693] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: registered 9 master devices 816[ 0.930498] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: option qcom,register-save 817[ 0.930696] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: option qcom,skip-init 818[ 0.930931] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: probing hardware configuration... 819[ 0.931139] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: SMMUv2 with: 820[ 0.931385] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: stage 1 translation 821[ 0.931568] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: address translation ops 822[ 0.931753] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: coherent table walk 823[ 0.931996] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: stream matching with 15 register groups, mask 0x7fff 824[ 0.932264] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: 12 context banks (0 stage-2 only) 825[ 0.932491] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: Supported page sizes: 0x62215000 826[ 0.932693] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: Stage-1: 36-bit VA -> 36-bit IPA 827[ 0.933019] [3: swapper/0: 1] arm-smmu 1600000.arm,smmu-lpass_q6: found 16 context interrupt(s) but have 12 context banks. assuming 12 context interrupts. 828[ 0.940973] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: registered 3 master devices 829[ 0.941581] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: option qcom,register-save 830[ 0.941767] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: option qcom,skip-init 831[ 0.942006] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: probing hardware configuration... 832[ 0.942206] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: SMMUv2 with: 833[ 0.942427] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: stage 1 translation 834[ 0.942603] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: address translation ops 835[ 0.942785] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: coherent table walk 836[ 0.943005] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: stream matching with 13 register groups, mask 0x7fff 837[ 0.943259] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: 7 context banks (0 stage-2 only) 838[ 0.943472] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: Supported page sizes: 0x62215000 839[ 0.943671] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: Stage-1: 36-bit VA -> 36-bit IPA 840[ 0.943994] [3: swapper/0: 1] arm-smmu 1640000.arm,smmu-anoc0: found 6 context interrupt(s) but have 7 context banks. assuming 7 context interrupts. 841[ 0.951857] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: registered 0 master devices 842[ 0.952312] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: option qcom,register-save 843[ 0.952499] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: option qcom,skip-init 844[ 0.952691] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: probing hardware configuration... 845[ 0.952887] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: SMMUv2 with: 846[ 0.953130] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: stage 1 translation 847[ 0.953303] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: address translation ops 848[ 0.953488] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: coherent table walk 849[ 0.953733] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: stream matching with 23 register groups, mask 0x7fff 850[ 0.953983] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: 4 context banks (0 stage-2 only) 851[ 0.954202] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: Supported page sizes: 0x62215000 852[ 0.954398] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: Stage-1: 36-bit VA -> 36-bit IPA 853[ 0.954608] [3: swapper/0: 1] arm-smmu 1660000.arm,smmu-anoc1: found 8 context interrupt(s) but have 4 context banks. assuming 4 context interrupts. 854[ 0.962430] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: registered 0 master devices 855[ 0.962887] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: option qcom,register-save 856[ 0.963071] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: option qcom,skip-init 857[ 0.963269] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: probing hardware configuration... 858[ 0.963465] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: SMMUv2 with: 859[ 0.963698] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: stage 1 translation 860[ 0.963874] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: address translation ops 861[ 0.964054] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: coherent table walk 862[ 0.964295] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: stream matching with 9 register groups, mask 0x7fff 863[ 0.964547] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: 8 context banks (0 stage-2 only) 864[ 0.964763] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: Supported page sizes: 0x62215000 865[ 0.964960] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: Stage-1: 36-bit VA -> 36-bit IPA 866[ 0.965166] [3: swapper/0: 1] arm-smmu 1680000.arm,smmu-anoc2: found 12 context interrupt(s) but have 8 context banks. assuming 8 context interrupts. 867[ 0.968729] [3: swapper/0: 1] [SENSORS CLASS] sensors_class_init 868[ 0.969010] [3: swapper/0: 1] ------------[ cut here ]------------ 869[ 0.969180] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:551 device_create_file+0x98/0xa8() 870[ 0.969516] [3: swapper/0: 1] Attribute flush: read permission without 'show' 871[ 0.969685] [3: swapper/0: 1] Modules linked in: 872[ 0.969813] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 873[ 0.970173] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 874[ 0.970352] [3: swapper/0: 1] Call trace: 875[ 0.970475] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 876[ 0.970639] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 877[ 0.970808] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 878[ 0.970969] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 879[ 0.971140] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 880[ 0.971306] [3: swapper/0: 1] [<ffffffc0005d1c98>] device_create_file+0x94/0xa8 881[ 0.971473] [3: swapper/0: 1] [<ffffffc0014c2b34>] sensors_init+0xc4/0x1b8 882[ 0.971636] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 883[ 0.971814] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 884[ 0.971991] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 885[ 0.972148] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdce8 ]--- 886[ 0.972479] [3: swapper/0: 1] input: meta_event as /devices/virtual/input/input0 887[ 0.972659] [3: swapper/0: 1] [SENSORS CLASS] sensors_class_init succcess 888[ 0.972826] [3: swapper/0: 1] fingerprint_class_init 889[ 0.973034] [3: swapper/0: 1] Advanced Linux Sound Architecture Driver Initialized. 890[ 0.973865] [3: swapper/0: 1] Bluetooth: Core ver 2.19 891[ 0.974076] [3: swapper/0: 1] NET: Registered protocol family 31 892[ 0.974218] [3: swapper/0: 1] Bluetooth: HCI device and connection manager initialized 893[ 0.974406] [3: swapper/0: 1] Bluetooth: HCI socket layer initialized 894[ 0.974562] [3: swapper/0: 1] Bluetooth: L2CAP socket layer initialized 895[ 0.974747] [3: swapper/0: 1] Bluetooth: SCO socket layer initialized 896[ 0.975225] [3: swapper/0: 1] regulatory is not upadted via queue_regulatory_request. 897[ 0.975627] [3: swapper/0: 1] pcie:pcie_init. 898[ 0.979182] [3: swapper/0: 1] 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator 899[ 0.984818] [3: swapper/0: 1] sec_debug_summary_init: SMEM_ID_VENDOR0=0x88 size=0x4440 900[ 0.985052] [3: swapper/0: 1] sec_debug_summary_init: apss(86006560) rpm(86007a00) modem(860089c0) dsps(860099a0) 901[ 0.985298] [3: swapper/0: 1] **** secdbg_log or secdbg_paddr is not initialized **** 902[ 0.985484] [3: swapper/0: 1] sec_debug_core_reg_paddr = 0x814f18d0 903[ 0.985634] [3: swapper/0: 1] cpu_data_paddr = 0x177cc4300 904[ 0.985765] [3: swapper/0: 1] cpu_buf_paddr = 0x177ce0000 905[ 0.986502] [3: swapper/0: 1] Switched to clocksource arch_sys_counter 906[ 1.029202] [3: swapper/0: 1] s2mpb02:s2mpb02_i2c_init 907[ 1.029472] [3: swapper/0: 1] <s2mpb02_i2c_probe> start 908[ 1.030475] [3: swapper/0: 1] i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x3 (ok) 909[ 1.031116] [3: swapper/0: 1] s2mpb02_i2c_probe: device id 0x0 is found 910[ 1.031647] [3: swapper/0: 1] <s2mpb02_pmic_probe> start 911[ 1.032079] [3: swapper/0: 1] ------------[ cut here ]------------ 912[ 1.032252] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/include/linux/of.h:762 of_get_regulator_init_data+0x2ac/0x2c0() 913[ 1.032602] [3: swapper/0: 1] Modules linked in: 914[ 1.032730] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 915[ 1.032944] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 916[ 1.033125] [3: swapper/0: 1] Call trace: 917[ 1.033249] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 918[ 1.033414] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 919[ 1.033586] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 920[ 1.033753] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 921[ 1.033927] [3: swapper/0: 1] [<ffffffc000127238>] warn_slowpath_null+0x14/0x20 922[ 1.034096] [3: swapper/0: 1] [<ffffffc00052e974>] of_get_regulator_init_data+0x2a8/0x2c0 923[ 1.034286] [3: swapper/0: 1] [<ffffffc000548100>] s2mpb02_pmic_probe+0x370/0x3a0 924[ 1.034466] [3: swapper/0: 1] [<ffffffc0005d7774>] platform_drv_probe+0x34/0x84 925[ 1.034633] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 926[ 1.034803] [3: swapper/0: 1] [<ffffffc0005d5ed4>] __device_attach+0x28/0x4c 927[ 1.034978] [3: swapper/0: 1] [<ffffffc0005d4340>] bus_for_each_drv+0x70/0x90 928[ 1.035139] [3: swapper/0: 1] [<ffffffc0005d5c28>] device_attach+0x68/0x98 929[ 1.035299] [3: swapper/0: 1] [<ffffffc0005d5254>] bus_probe_device+0x28/0xa0 930[ 1.035463] [3: swapper/0: 1] [<ffffffc0005d3604>] device_add+0x300/0x510 931[ 1.035619] [3: swapper/0: 1] [<ffffffc0005d752c>] platform_device_add+0x154/0x1d4 932[ 1.035812] [3: swapper/0: 1] [<ffffffc000610318>] mfd_add_device+0x2a8/0x2ec 933[ 1.035980] [3: swapper/0: 1] [<ffffffc0006103f8>] mfd_add_devices+0x9c/0xf8 934[ 1.036151] [3: swapper/0: 1] [<ffffffc000612e5c>] s2mpb02_i2c_probe+0x2bc/0x344 935[ 1.036336] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 936[ 1.036505] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 937[ 1.036680] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 938[ 1.036846] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 939[ 1.037014] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 940[ 1.037176] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 941[ 1.037344] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 942[ 1.037510] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 943[ 1.037691] [3: swapper/0: 1] [<ffffffc0014ae3a4>] s2mpb02_i2c_init+0x34/0x40 944[ 1.037857] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 945[ 1.038033] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 946[ 1.038213] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 947[ 1.038369] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdce9 ]--- 948[ 1.038525] [3: swapper/0: 1] ------------[ cut here ]------------ 949[ 1.038673] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/include/linux/of.h:762 of_get_regulator_init_data+0x2ac/0x2c0() 950[ 1.039010] [3: swapper/0: 1] Modules linked in: 951[ 1.039126] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 952[ 1.039332] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 953[ 1.039502] [3: swapper/0: 1] Call trace: 954[ 1.039607] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 955[ 1.039767] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 956[ 1.039922] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 957[ 1.040120] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 958[ 1.040290] [3: swapper/0: 1] [<ffffffc000127238>] warn_slowpath_null+0x14/0x20 959[ 1.040458] [3: swapper/0: 1] [<ffffffc00052e974>] of_get_regulator_init_data+0x2a8/0x2c0 960[ 1.040643] [3: swapper/0: 1] [<ffffffc000548100>] s2mpb02_pmic_probe+0x370/0x3a0 961[ 1.040813] [3: swapper/0: 1] [<ffffffc0005d7774>] platform_drv_probe+0x34/0x84 962[ 1.040982] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 963[ 1.041152] [3: swapper/0: 1] [<ffffffc0005d5ed4>] __device_attach+0x28/0x4c 964[ 1.041314] [3: swapper/0: 1] [<ffffffc0005d4340>] bus_for_each_drv+0x70/0x90 965[ 1.041479] [3: swapper/0: 1] [<ffffffc0005d5c28>] device_attach+0x68/0x98 966[ 1.041636] [3: swapper/0: 1] [<ffffffc0005d5254>] bus_probe_device+0x28/0xa0 967[ 1.041800] [3: swapper/0: 1] [<ffffffc0005d3604>] device_add+0x300/0x510 968[ 1.041959] [3: swapper/0: 1] [<ffffffc0005d752c>] platform_device_add+0x154/0x1d4 969[ 1.042130] [3: swapper/0: 1] [<ffffffc000610318>] mfd_add_device+0x2a8/0x2ec 970[ 1.042296] [3: swapper/0: 1] [<ffffffc0006103f8>] mfd_add_devices+0x9c/0xf8 971[ 1.042458] [3: swapper/0: 1] [<ffffffc000612e5c>] s2mpb02_i2c_probe+0x2bc/0x344 972[ 1.042626] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 973[ 1.042791] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 974[ 1.042960] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 975[ 1.043121] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 976[ 1.043286] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 977[ 1.043443] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 978[ 1.043606] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 979[ 1.043769] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 980[ 1.043936] [3: swapper/0: 1] [<ffffffc0014ae3a4>] s2mpb02_i2c_init+0x34/0x40 981[ 1.044101] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 982[ 1.044267] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 983[ 1.044440] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 984[ 1.044597] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdcea ]--- 985[ 1.044744] [3: swapper/0: 1] [/home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/regulator/s2mpb02-regulator.c:381] pdata->num_regulators:21 986[ 1.045360] [3: swapper/0: 1] s2mpb02-ldo1: 600 <--> 2187 mV at 900 mV 987[ 1.046041] [3: swapper/0: 1] s2mpb02-ldo2: 600 <--> 2187 mV at 1000 mV 988[ 1.046612] [3: swapper/0: 1] s2mpb02-ldo3: 600 <--> 2187 mV at 1000 mV 989[ 1.047220] [3: swapper/0: 1] s2mpb02-ldo4: 600 <--> 2187 mV at 1200 mV 990[ 1.047787] [3: swapper/0: 1] s2mpb02-ldo5: 600 <--> 2187 mV at 1200 mV 991[ 1.048387] [3: swapper/0: 1] s2mpb02-ldo6: 600 <--> 3775 mV at 1800 mV 992[ 1.048954] [3: swapper/0: 1] s2mpb02-ldo7: 600 <--> 3775 mV at 1800 mV 993[ 1.049522] [3: swapper/0: 1] s2mpb02-ldo8: 600 <--> 3775 mV at 1800 mV 994[ 1.050138] [3: swapper/0: 1] s2mpb02-ldo9: 600 <--> 3775 mV at 1800 mV 995[ 1.050716] [3: swapper/0: 1] s2mpb02-ldo10: 600 <--> 3775 mV at 1800 mV 996[ 1.051317] [3: swapper/0: 1] s2mpb02-ldo11: 600 <--> 3775 mV at 2800 mV 997[ 1.051887] [3: swapper/0: 1] s2mpb02-ldo12: 600 <--> 3775 mV at 2800 mV 998[ 1.052465] [3: swapper/0: 1] s2mpb02-ldo13: 600 <--> 3775 mV at 2900 mV 999[ 1.053058] [3: swapper/0: 1] s2mpb02-ldo14: 600 <--> 3775 mV at 2800 mV 1000[ 1.053641] [3: swapper/0: 1] s2mpb02-ldo15: 600 <--> 3775 mV at 2800 mV 1001[ 1.055183] [3: swapper/0: 1] s2mpb02-ldo16: 3300 mV 1002[ 1.055757] [3: swapper/0: 1] s2mpb02-ldo17: 600 <--> 3775 mV at 2950 mV 1003[ 1.056333] [3: swapper/0: 1] s2mpb02-ldo18: 600 <--> 3775 mV at 3300 mV 1004[ 1.057647] [3: swapper/0: 1] s2mpb02-buck1: 1300 mV 1005[ 1.058201] [3: swapper/0: 1] s2mpb02-buck2: 500 <--> 1300 mV at 800 mV 1006[ 1.059326] [3: swapper/0: 1] s2mpb02-bb: 3500 mV 1007[ 1.059706] [3: swapper/0: 1] <s2mpb02_pmic_probe> end 1008[ 1.059853] [3: swapper/0: 1] <s2mpb02_i2c_probe> end 1009[ 1.060208] [3: swapper/0: 1] bcl_peripheral:bcl_perph_init BCL Initialized 1010[ 1.061942] [3: swapper/0: 1] NET: Registered protocol family 2 1011[ 1.062807] [3: swapper/0: 1] TCP established hash table entries: 32768 (order: 6, 262144 bytes) 1012[ 1.063096] [3: swapper/0: 1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) 1013[ 1.063628] [3: swapper/0: 1] TCP: Hash tables configured (established 32768 bind 32768) 1014[ 1.063951] [3: swapper/0: 1] TCP: reno registered 1015[ 1.064082] [3: swapper/0: 1] UDP hash table entries: 2048 (order: 4, 65536 bytes) 1016[ 1.064276] [3: swapper/0: 1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) 1017[ 1.064848] [3: swapper/0: 1] NET: Registered protocol family 1 1018[ 1.065049] [3: swapper/0: 1] PCI: CLS 0 bytes, default 128 1019[ 1.065882] [3: swapper/0: 1] Trying to unpack rootfs image as initramfs... 1020[ 1.110287] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:65 1021[ 1.110544] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:65 1022[ 1.110782] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:65 1023[ 1.111020] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:65 1024[ 1.160449] [3: swapper/0: 1] Freeing initrd memory: 4940K (ffffffc003400000 - ffffffc0038d3000) 1025[ 1.162683] [3: swapper/0: 1] kryo perfevents: CPU pmu for kryo-pmuv3 detected 1026[ 1.165150] [1: cryptomgr_test: 117] FIPS: self-tests for sha1-ce (sha1) passed 1027[ 1.165647] [2: cryptomgr_test: 118] FIPS: self-tests for sha224-ce (sha224) passed 1028[ 1.166050] [2: cryptomgr_test: 119] FIPS: self-tests for sha256-ce (sha256) passed 1029[ 1.166424] [3: cryptomgr_test: 120] FIPS: self-tests for aes-ce (aes) passed 1030[ 1.170224] [2: swapper/0: 1] futex hash table entries: 1024 (order: 5, 131072 bytes) 1031[ 1.170521] [2: swapper/0: 1] audit: initializing netlink subsys (enabled) 1032[ 1.175557] [3: swapper/0: 1] vmscan: error setting kswapd cpu affinity mask 1033[ 1.179058] [3: swapper/0: 1] zpool: loaded 1034[ 1.180523] [3: swapper/0: 1] Registering sdcardfs 3.1.0 1035[ 1.181175] [3: swapper/0: 1] exFAT: Core Version 1.2.19 1036[ 1.181311] [3: swapper/0: 1] exFAT: FS Version 1.2.19 1037[ 1.181487] [3: swapper/0: 1] [SDFAT] Filesystem version 1.0.15 1038[ 1.182177] [3: swapper/0: 1] fuse init (API version 7.23) 1039[ 1.182514] [3: swapper/0: 1] msgmni has been set to 6777 1040[ 1.182702] [3: swapper/0: 1] SELinux: Registering netfilter hooks 1041[ 1.183369] [3: swapper/0: 1] pfk [pfk_init]: Driver initialized successfully 1042[ 1.183538] [3: swapper/0: 1] [MST] mst_drv_init 1043[ 1.185910] [3: swapper/0: 1] [MST] mst_ldo_device_probe init start 1044[ 1.186489] [3: swapper/0: 1] [MST] sec_mst_gpio_init : Send Output 1045[ 1.186782] [3: swapper/0: 1] [MST] MST drv driver (mst_drv) is initialized. 1046[ 1.187379] [3: swapper/0: 1] [MST] MST_LDO_DRV]]] init , ret val : 0 1047[ 1.187565] [3: swapper/0: 1] iccc_init: 1048[ 1.187717] [3: swapper/0: 1] iccc_init: registered /proc/iccc_ready interface 1049[ 1.187959] [3: swapper/0: 1] tima_uevent_init 1050[ 1.188136] [3: swapper/0: 1] TIMA uevent driver (tima_uevent) is initialized. 1051[ 1.188457] [3: swapper/0: 1] key_dump feature not availabledek: initialized 1052[ 1.188649] [3: swapper/0: 1] SDP_MM: entering************************************************ 1053[ 1.188960] [3: swapper/0: 1] SDP_PUB_CRYPTO[1] : pub_crypto_mod_init netlink socket is created successfully! 1054[ 1.189357] [3: swapper/0: 1] SDP_FS_HANDLER[1] : sdp_fs_handler_mod_init netlink socket is created successfully! 1055[ 1.189645] [3: swapper/0: 1] DLP: dlp_ioctl initialized 1056[ 1.190054] [1: cryptomgr_test: 133] FIPS: self-tests for non-FIPS cipher_null-generic (cipher_null) passed 1057[ 1.190729] [1: cryptomgr_test: 134] FIPS: self-tests for non-FIPS ecb-cipher_null (ecb(cipher_null)) passed 1058[ 1.191081] [1: cryptomgr_test: 135] FIPS: self-tests for non-FIPS compress_null-generic (compress_null) passed 1059[ 1.191484] [1: cryptomgr_test: 136] FIPS: self-tests for non-FIPS digest_null-generic (digest_null) passed 1060[ 1.191913] [1: cryptomgr_test: 137] FIPS: self-tests for non-FIPS md5-generic (md5) passed 1061[ 1.192417] [1: cryptomgr_test: 138] FIPS: self-tests for sha1-generic (sha1) passed 1062[ 1.192916] [1: cryptomgr_test: 139] FIPS: self-tests for sha256-generic (sha256) passed 1063[ 1.193383] [1: cryptomgr_test: 140] FIPS: self-tests for sha224-generic (sha224) passed 1064[ 1.193906] [1: cryptomgr_test: 141] FIPS: self-tests for sha512-generic (sha512) passed 1065[ 1.194413] [1: cryptomgr_test: 142] FIPS: self-tests for sha384-generic (sha384) passed 1066[ 1.195104] [2: cryptomgr_test: 143] FIPS: self-tests for des-generic (des) passed 1067[ 1.195479] [1: cryptomgr_test: 144] FIPS: self-tests for des3_ede-generic (des3_ede) passed 1068[ 1.195864] [1: cryptomgr_test: 145] FIPS: self-tests for non-FIPS twofish-generic (twofish) passed 1069[ 1.196350] [1: cryptomgr_test: 146] FIPS: self-tests for aes-generic (aes) passed 1070[ 1.196707] [1: cryptomgr_test: 147] FIPS: self-tests for non-FIPS arc4-generic (arc4) passed 1071[ 1.197066] [1: cryptomgr_test: 148] FIPS: self-tests for non-FIPS ecb(arc4)-generic (ecb(arc4)) passed 1072[ 1.198058] [1: cryptomgr_test: 149] FIPS: self-tests for deflate-generic (deflate) passed 1073[ 1.198630] [1: cryptomgr_test: 150] FIPS: self-tests for crc32c-generic (crc32c) passed 1074[ 1.199053] [1: cryptomgr_test: 151] FIPS: self-tests for lzo-generic (lzo) passed 1075[ 1.199411] [1: cryptomgr_test: 152] FIPS: No test for stdrng (krng) 1076[ 1.201332] [2: cryptomgr_test: 158] FIPS: self-tests for ecb(aes-ce) (ecb(aes)) passed 1077[ 1.202302] [0: cryptomgr_test: 159] FIPS: self-tests for drbg_pr_ctr_aes128 (stdrng) passed 1078[ 1.202667] [0: cryptomgr_test: 160] FIPS: self-tests for drbg_pr_ctr_aes192 (stdrng) passed 1079[ 1.203044] [0: cryptomgr_test: 161] FIPS: self-tests for drbg_pr_ctr_aes256 (stdrng) passed 1080[ 1.203419] [0: cryptomgr_test: 162] FIPS: self-tests for drbg_pr_sha1 (stdrng) passed 1081[ 1.203771] [0: cryptomgr_test: 163] FIPS: self-tests for drbg_pr_sha384 (stdrng) passed 1082[ 1.204112] [0: cryptomgr_test: 164] FIPS: self-tests for drbg_pr_sha512 (stdrng) passed 1083[ 1.204755] [0: cryptomgr_test: 165] FIPS: self-tests for drbg_pr_sha256 (stdrng) passed 1084[ 1.205166] [0: cryptomgr_test: 166] FIPS: self-tests for drbg_pr_hmac_sha1 (stdrng) passed 1085[ 1.205514] [0: cryptomgr_test: 167] FIPS: self-tests for drbg_pr_hmac_sha384 (stdrng) passed 1086[ 1.205902] [0: cryptomgr_test: 168] FIPS: self-tests for drbg_pr_hmac_sha512 (stdrng) passed 1087[ 1.207545] [2: cryptomgr_test: 175] FIPS: self-tests for hmac(sha256-ce) (hmac(sha256)) passed 1088[ 1.208069] [3: cryptomgr_test: 169] FIPS: self-tests for drbg_pr_hmac_sha256 (stdrng) passed 1089[ 1.208701] [2: cryptomgr_test: 176] FIPS: self-tests for drbg_nopr_ctr_aes128 (stdrng) passed 1090[ 1.209259] [1: cryptomgr_test: 177] FIPS: self-tests for drbg_nopr_ctr_aes192 (stdrng) passed 1091[ 1.209740] [2: cryptomgr_test: 178] FIPS: self-tests for drbg_nopr_ctr_aes256 (stdrng) passed 1092[ 1.210611] [1: cryptomgr_test: 179] FIPS: self-tests for drbg_nopr_sha1 (stdrng) passed 1093[ 1.211090] [1: cryptomgr_test: 180] FIPS: self-tests for drbg_nopr_sha384 (stdrng) passed 1094[ 1.211468] [1: cryptomgr_test: 181] FIPS: self-tests for drbg_nopr_sha512 (stdrng) passed 1095[ 1.212073] [1: cryptomgr_test: 182] FIPS: self-tests for drbg_nopr_sha256 (stdrng) passed 1096[ 1.212420] [1: cryptomgr_test: 183] FIPS: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed 1097[ 1.212759] [1: cryptomgr_test: 184] FIPS: self-tests for drbg_nopr_hmac_sha384 (stdrng) passed 1098[ 1.213098] [1: cryptomgr_test: 185] FIPS: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed 1099[ 1.213831] [1: cryptomgr_test: 186] FIPS: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed 1100[ 1.214487] [1: cryptomgr_test: 187] FIPS: self-tests for ghash-generic (ghash) passed 1101[ 1.214948] [3: swapper/0: 1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) 1102[ 1.215161] [3: swapper/0: 1] io scheduler noop registered 1103[ 1.215300] [3: swapper/0: 1] io scheduler deadline registered 1104[ 1.215568] [3: swapper/0: 1] io scheduler cfq registered (default) 1105[ 1.224139] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-sleepstate-gpio-3-out: Driver smp2pgpio requests probe deferral 1106[ 1.224509] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-1-in: Driver smp2pgpio requests probe deferral 1107[ 1.224853] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-1-out: Driver smp2pgpio requests probe deferral 1108[ 1.225203] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-2-in: Driver smp2pgpio requests probe deferral 1109[ 1.225552] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-2-out: Driver smp2pgpio requests probe deferral 1110[ 1.225905] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-3-in: Driver smp2pgpio requests probe deferral 1111[ 1.226253] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-ssr-smp2p-3-out: Driver smp2pgpio requests probe deferral 1112[ 1.226708] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-rdbg-2-in: Driver smp2pgpio requests probe deferral 1113[ 1.227050] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-rdbg-2-out: Driver smp2pgpio requests probe deferral 1114[ 1.227386] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-rdbg-1-in: Driver smp2pgpio requests probe deferral 1115[ 1.227708] [3: swapper/0: 1] platform soc:qcom,smp2pgpio-rdbg-1-out: Driver smp2pgpio requests probe deferral 1116[ 1.230396] [3: swapper/0: 1] mdss_mdp_parse_dt_hw_settings: MDSS VBIF settings not found 1117[ 1.230610] [3: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree 1118[ 1.230917] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:0 num:0 ndx:0x1 prio:0 1119[ 1.231125] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:4 num:1 ndx:0x2 prio:1 1120[ 1.231328] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:8 num:2 ndx:0x4 prio:2 1121[ 1.231537] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:1 num:3 ndx:0x8 prio:4 1122[ 1.231739] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:5 num:4 ndx:0x10 prio:5 1123[ 1.231955] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:9 num:5 ndx:0x20 prio:6 1124[ 1.232168] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:2 num:6 ndx:0x40 prio:8 1125[ 1.232383] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:3 ftchid:0 xinid:10 num:7 ndx:0x80 prio:9 1126[ 1.232597] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:1 ftchid:0 xinid:12 num:8 ndx:0x100 prio:3 1127[ 1.232815] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:2 ftchid:0 xinid:13 num:9 ndx:0x200 prio:7 1128[ 1.233042] [3: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read 1129[ 1.233312] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:10 ndx:0x400 prio:0 1130[ 1.233531] [3: swapper/0: 1] mdss_mdp_pipe_addr_setup: type:4 ftchid:-1 xinid:7 num:11 ndx:0x800 prio:1 1131[ 1.233747] [3: swapper/0: 1] mdss_mdp_parse_dt_pipe: dedicated vp cursors detected, num=2 1132[ 1.234023] [3: swapper/0: 1] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read 1133[ 1.234266] [3: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-clk-levels : doesn't exist in device tree 1134[ 1.234537] [3: swapper/0: 1] mdss_mdp_parse_dt_prop_len: prop qcom,mdss-smp-data : doesn't exist in device tree 1135[ 1.235849] [2: swapper/0: 1] mdss_mdp_irq_clk_register: unable to get clk: lut_clk 1136[ 1.237902] [3: swapper/0: 1] xlog_status: enable:0, panic:1, dump:2 1137[ 1.239441] [3: swapper/0: 1] mdss_smmu_attach_v2: iommu device not attached for domain[0] 1138[ 1.239636] [3: swapper/0: 1] mdss_mdp_clk_ctrl: IOMMU attach failed 1139[ 1.239790] [3: swapper/0: 1] No change in context(0==0), skip 1140[ 1.240509] [0: kworker/0:1: 43] smd_channel_probe_now: allocation table not initialized 1141[ 1.241814] [3: swapper/0: 1] mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on 1142[ 1.247388] [3: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! 1143[ 1.247658] [3: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful! 1144[ 1.247904] [3: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! 1145[ 1.248139] [3: swapper/0: 1] mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful! 1146[ 1.249682] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: gdsc min=0, max=0, enable=0, disable=0, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1147[ 1.249868] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdda min=1250000, max=1250000, enable=18160, disable=1, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1148[ 1.250136] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vcca min=925000, max=925000, enable=17000, disable=32, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1149[ 1.250856] [3: swapper/0: 1] [MDSS] check_valid_ctrl : Invalid vdd_data : 0x0 1150[ 1.251778] [3: swapper/0: 1] mdss_dsi_ctrl_probe ++ 1151[ 1.251855] [3: swapper/0: 1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 1152[ 1.252278] [3: swapper/0: 1] mdss_dsi_get_panel_cfg:556: cfg:[0:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi] 1153[ 1.252454] [3: swapper/0: 1] mdss_dsi_find_panel_of_node: cmdline:0:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi panel_name:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD 1154[ 1.252682] [3: swapper/0: 1] mdss_dsi_panel_init:2829 ++ 1155[ 1.252760] [3: swapper/0: 1] mdss_dsi_panel_init: Panel Name = ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD 1156[ 1.253000] [3: swapper/0: 1] mdss_dsi_panel_timing_from_dt: found new timing "ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD" (ffffffc0f989b368) 1157[ 1.253162] [3: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command 1158[ 1.253285] [3: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command 1159[ 1.253492] [3: swapper/0: 1] mdss_dsi_parse_panel_features: partial_update_enabled=1 1160[ 1.253601] [3: swapper/0: 1] mdss_dsi_parse_panel_features: ulps feature enabled 1161[ 1.253704] [3: swapper/0: 1] mdss_dsi_parse_panel_features: ulps during suspend feature disabled 1162[ 1.253820] [3: swapper/0: 1] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 1163[ 1.253937] [3: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command 1164[ 1.254071] [3: swapper/0: 1] mdss_dsi_parse_esd_params : ststus mode (ESD_REG_IRQ) 1165[ 1.254184] [3: swapper/0: 1] mdss_dsi_panel_init:2857 -- 1166[ 1.254274] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdd3 min=1800000, max=1800000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1167[ 1.254469] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vci min=3000000, max=3000000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1168[ 1.254661] [3: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vddr min=1600000, max=1600000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1169[ 1.261699] [3: swapper/0: 1] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found 1170[ 1.261829] [3: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources+0x164/0x208->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed 1171[ 1.261994] [3: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources:3358 unable to remap dsi phy regulator resources 1172[ 1.262121] [3: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8000ebe000 ctrl_size=400 phy_base=ffffff800170e400 phy_size=588 1173[ 1.262473] [2: swapper/0: 1] dsi_panel_device_register: Continuous splash enabled 1174[ 1.263210] [2: swapper/0: 1] mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0 1175[ 1.263820] [2: swapper/0: 1] [MDSS] mdss_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 1176[ 1.264067] [2: swapper/0: 1] [MDSS] mdss_panel_attach_set : panel_attach_status : 1 1177[ 1.264188] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : LP11 init disabled 1178[ 1.264302] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : ESC CLK 128M disabled 1179[ 1.264412] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : alpm enable enabled 1180[ 1.264519] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hall_ic disabled 1181[ 1.264623] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : OSC TE fitting disabled 1182[ 1.264734] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hmt enabled 1183[ 1.264837] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : tft_common_support disabled 1184[ 1.264958] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : backlight_gpio_config disabled 1185[ 1.265078] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio1 not specified 1186[ 1.265208] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio2 not specified 1187[ 1.265337] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio3 not specified 1188[ 1.265466] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio4 not specified 1189[ 1.265596] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio1 not specified 1190[ 1.265727] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio2 not specified 1191[ 1.265856] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio3 not specified 1192[ 1.265986] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio4 not specified 1193[ 1.266131] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_cmds : DSI0 1194[ 1.266307] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,vint_map_table_revA 1195[ 1.266451] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,acl_map_table_revA 1196[ 1.266591] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_lux_mapping_table : Success to read table samsung,candela_map_table_revA 1197[ 1.266763] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,aid_map_table_revA 1198[ 1.266991] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,smart_acl_elvss_map_table_revA 1199[ 1.267231] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,hmt_reverse_aid_map_table_revA 1200[ 1.267380] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_lux_mapping_table : Success to read table samsung,hmt_candela_map_table_revA 1201[ 1.274043] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : [ESD] gpio : 1008, irq : 545 1202[ 1.274187] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : [ESD] gpio : 1012, irq : 546 1203[ 1.274317] [2: swapper/0: 1] dsi_panel_device_register: Panel data initialized 1204[ 1.278892] [2: swapper/0: 1] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized 1205[ 1.279787] [2: swapper/0: 1] mdss_dsi_ctrl_probe ++ 1206[ 1.279867] [2: swapper/0: 1] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1 1207[ 1.280292] [2: swapper/0: 1] mdss_dsi_get_panel_cfg:556: cfg:[0:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi] 1208[ 1.280470] [2: swapper/0: 1] mdss_dsi_find_panel_of_node: cmdline:0:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi panel_name:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD 1209[ 1.280697] [2: swapper/0: 1] mdss_dsi_panel_init:2829 ++ 1210[ 1.280775] [2: swapper/0: 1] mdss_dsi_panel_init: Panel Name = ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD 1211[ 1.281013] [2: swapper/0: 1] mdss_dsi_panel_timing_from_dt: found new timing "ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD" (ffffffc0f989b368) 1212[ 1.281187] [2: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command 1213[ 1.281310] [2: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command 1214[ 1.281517] [2: swapper/0: 1] mdss_dsi_parse_panel_features: partial_update_enabled=1 1215[ 1.281625] [2: swapper/0: 1] mdss_dsi_parse_panel_features: ulps feature enabled 1216[ 1.281727] [2: swapper/0: 1] mdss_dsi_parse_panel_features: ulps during suspend feature disabled 1217[ 1.281844] [2: swapper/0: 1] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 1218[ 1.281959] [2: swapper/0: 1] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command 1219[ 1.282092] [2: swapper/0: 1] mdss_dsi_parse_esd_params : ststus mode (ESD_REG_IRQ) 1220[ 1.282205] [2: swapper/0: 1] mdss_dsi_panel_init:2857 -- 1221[ 1.282295] [2: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vdd3 min=1800000, max=1800000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1222[ 1.282489] [2: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vci min=3000000, max=3000000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1223[ 1.282682] [2: swapper/0: 1] mdss_dsi_get_dt_vreg_data: vddr min=1600000, max=1600000, enable=100000, disable=100, preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0 1224[ 1.282950] [2: swapper/0: 1] 996000.qcom,mdss_dsi_ctrl1 supply vdd3 not found, using dummy regulator 1225[ 1.283163] [2: swapper/0: 1] 996000.qcom,mdss_dsi_ctrl1 supply vci not found, using dummy regulator 1226[ 1.283309] [2: swapper/0: 1] 996000.qcom,mdss_dsi_ctrl1 supply vddr not found, using dummy regulator 1227[ 1.283558] [2: swapper/0: 1] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found 1228[ 1.283686] [2: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources+0x164/0x208->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed 1229[ 1.283851] [2: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources:3358 unable to remap dsi phy regulator resources 1230[ 1.283979] [2: swapper/0: 1] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001732000 ctrl_size=400 phy_base=ffffff8001734400 phy_size=558 1231[ 1.284167] [2: swapper/0: 1] dsi_panel_device_register: Continuous splash enabled 1232[ 1.284969] [2: swapper/0: 1] panel_debug_register_base: debugfs_create_file: offset fail 1233[ 1.285081] [2: swapper/0: 1] [MDSS] mdss_panel_init : ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:1:ss_dsi_panel_S6E3HA3_AMS567JA01_WQHD:cfg:split_dsi 1234[ 1.285248] [2: swapper/0: 1] [MDSS] mdss_panel_attach_set : panel_attach_status : 3 1235[ 1.285363] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : LP11 init disabled 1236[ 1.285475] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : ESC CLK 128M disabled 1237[ 1.285582] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : alpm enable enabled 1238[ 1.285688] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hall_ic disabled 1239[ 1.285792] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : OSC TE fitting disabled 1240[ 1.285904] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : hmt enabled 1241[ 1.286007] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : tft_common_support disabled 1242[ 1.286128] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : backlight_gpio_config disabled 1243[ 1.286248] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio1 not specified 1244[ 1.286378] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio2 not specified 1245[ 1.286509] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio3 not specified 1246[ 1.286638] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3687, panel_extra_power gpio4 not specified 1247[ 1.286770] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio1 not specified 1248[ 1.286899] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio2 not specified 1249[ 1.287029] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio3 not specified 1250[ 1.287159] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt : 3700, backlight_tft_gpio gpio4 not specified 1251[ 1.287302] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_cmds : DSI1 1252[ 1.287457] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,vint_map_table_revA 1253[ 1.287609] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,acl_map_table_revA 1254[ 1.287749] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_lux_mapping_table : Success to read table samsung,candela_map_table_revA 1255[ 1.287922] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,aid_map_table_revA 1256[ 1.288144] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,smart_acl_elvss_map_table_revA 1257[ 1.288380] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_panel_table : Success to read table samsung,hmt_reverse_aid_map_table_revA 1258[ 1.288530] [2: swapper/0: 1] [MDSS] mdss_samsung_parse_candella_lux_mapping_table : Success to read table samsung,hmt_candela_map_table_revA 1259[ 1.295054] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : [ESD] gpio : 1008, irq : 545 1260[ 1.295187] [2: swapper/0: 1] [MDSS] mdss_samsung_panel_parse_dt_esd : [ESD] gpio : 1012, irq : 546 1261[ 1.295316] [2: swapper/0: 1] dsi_panel_device_register: Panel data initialized 1262[ 1.295499] [2: swapper/0: 1] mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized 1263[ 1.297160] [2: swapper/0: 1] mdss_dsi_status_init: DSI status check interval:5000 1264[ 1.297805] [2: swapper/0: 1] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel 1265[ 1.299965] [2: swapper/0: 1] mdss_fb_probe: fb0: split_mode:2 left:720 right:720 1266[ 1.301735] [2: swapper/0: 1] mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully! 1267[ 1.301910] [2: swapper/0: 1] __mdss_mdp_overlay_ctl_init: __mdss_mdp_overlay_ctl_init ++ 1268[ 1.302035] [2: swapper/0: 1] __mdss_mdp_overlay_ctl_init: __mdss_mdp_overlay_ctl_init -- 1269[ 1.302299] [2: swapper/0: 1] [MDSS_EVENT_FB_REGISTERED] 1270[ 1.302427] [2: swapper/0: 1] mdss_dsi_debugfs_init: Initialized mdss_dsi_debugfs_init 1271[ 1.302681] [2: swapper/0: 1] [MDSS] mdss_samsung_create_sysfs : done!! 1272[ 1.302771] [2: swapper/0: 1] [MDSS] mdss_samsung_dsi_panel_registered : DSI0 success 1273[ 1.302874] [2: swapper/0: 1] [MDSS_EVENT_FB_REGISTERED] 1274[ 1.303006] [2: swapper/0: 1] mdss_dsi_debugfs_init: Initialized mdss_dsi_debugfs_init 1275[ 1.303110] [2: swapper/0: 1] [MDSS] mdss_samsung_dsi_panel_registered : no registered_fb[1] 1276[ 1.303966] [2: swapper/0: 1] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 1277[ 1.304177] [2: swapper/0: 1] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully! 1278[ 1.304350] [2: swapper/0: 1] mdss_mdp_splash_parse_dt: splash mem child node is not present 1279[ 1.310318] [2: swapper/0: 1] platform soc:qcom,smp2pgpio-sleepstate-3-out: Driver smp2p_sleepstate requests probe deferral 1280[ 1.310467] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49 1281[ 1.310607] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49 1282[ 1.310742] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49 1283[ 1.310876] [1: kworker/1:1: 70] msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49 1284[ 1.317668] [3: swapper/0: 1] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 1285[ 1.323723] [3: swapper/0: 1] l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs 1286[ 1.324687] [3: swapper/0: 1] msm_rpm_log_probe: OK 1287[ 1.328105] [3: swapper/0: 1] platform 9300000.qcom,lpass: Driver subsys-pil-tz requests probe deferral 1288[ 1.329109] [3: swapper/0: 1] platform 1c00000.qcom,ssc: Driver subsys-pil-tz requests probe deferral 1289[ 1.331714] [0: kworker/0:1: 43] smd_channel_probe_now: allocation table not initialized 1290[ 1.332086] [3: swapper/0: 1] platform 2080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral 1291[ 1.335188] [3: swapper/0: 1] uart_tx_gpio is not available 1292[ 1.335278] [3: swapper/0: 1] uart_rx_gpio is not available 1293[ 1.335355] [3: swapper/0: 1] uart_cts_gpio is not available 1294[ 1.335432] [3: swapper/0: 1] uart_rfr_gpio is not available 1295[ 1.335512] [3: swapper/0: 1] msm_hs_dt_to_pdata:Out of Band sleep flag is set 1296[ 1.335786] [3: swapper/0: 1] Wakeup irq not specified. 1297[ 1.336803] [3: swapper/0: 1] sps: BAM device 0x0000000007584000 is not registered yet. 1298[ 1.337127] [3: swapper/0: 1] sps:BAM 0x0000000007584000 is registered. 1299[ 1.338509] [3: swapper/0: 1] (msm_serial_hs) HS Uart clock on 1300[ 1.338814] [3: swapper/0: 1] 75af000.uart: ttyHS0 at MMIO 0x75af000 (irq = 388, base_baud = 460800) is a MSM HS UART 1301[ 1.339940] [3: swapper/0: 1] (msm_serial_hs) HS Uart clock off 1302[ 1.340335] [3: swapper/0: 1] msm_serial_hs module loaded 1303[ 1.341189] [3: swapper/0: 1] msm_serial_hsl_probe: detected port #0 (ttyHSL0) 1304[ 1.341333] [3: swapper/0: 1] AXI: get_pdata(): Error: Client name not found 1305[ 1.341428] [3: swapper/0: 1] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration 1306[ 1.341564] [3: swapper/0: 1] msm_serial_hsl_probe: Bus scaling is disabled 1307[ 1.341794] [3: swapper/0: 1] 75b0000.serial: ttyHSL0 at MMIO 0x75b0000 (irq = 19, base_baud = 460800) is a MSM 1308[ 1.343216] [3: swapper/0: 1] msm_serial_hsl_init: driver initialized 1309[ 1.343885] [3: swapper/0: 1] ctrl_port = ffffffc001e827e0 1310[ 1.344035] [3: swapper/0: 1] ctrl_port = ffffffc001e82e20 1311[ 1.344192] [3: swapper/0: 1] ctrl_port = ffffffc001e840e0 1312[ 1.344330] [3: swapper/0: 1] ctrl_port = ffffffc001e87f60 1313[ 1.344476] [3: swapper/0: 1] ctrl_port = ffffffc001e8dd20 1314[ 1.344636] [3: swapper/0: 1] ctrl_port = ffffffc001e7fc20 1315[ 1.344782] [3: swapper/0: 1] ctrl_port = ffffffc001e81520 1316[ 1.348990] [2: cryptomgr_test: 210] FIPS: No test for qrng (fips_hw_qrng) 1317[ 1.359040] [3: swapper/0: 1] platform b00000.qcom,kgsl-3d0: Driver kgsl-3d requests probe deferral 1318[ 1.364009] [3: swapper/0: 1] brd: module loaded 1319[ 1.365454] [3: swapper/0: 1] loop: module loaded 1320[ 1.366511] [3: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000 1321[ 1.366647] [3: swapper/0: 1] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2 1322[ 1.366746] [3: swapper/0: 1] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0 1323[ 1.366895] [3: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x1QSEECOM: qseecom_probe: no-clock-support=0x1 1324[ 1.367046] [3: swapper/0: 1] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 0 1325[ 1.368506] [3: swapper/0: 1] init tzic 1326[ 1.369394] [3: swapper/0: 1] tima_debug_log_read_init: Registering /proc/tima_debug_log Interface 1327[ 1.369653] [3: swapper/0: 1] ------------[ cut here ]------------ 1328[ 1.369748] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:548 device_create_file+0x78/0xa8() 1329[ 1.369932] [3: swapper/0: 1] Attribute msm_feature_id: write permission without 'store' 1330[ 1.370153] [3: swapper/0: 1] Modules linked in: 1331[ 1.370226] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 1332[ 1.370344] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 1333[ 1.370444] [3: swapper/0: 1] Call trace: 1334[ 1.370515] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 1335[ 1.370608] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 1336[ 1.370705] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 1337[ 1.370798] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 1338[ 1.370896] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 1339[ 1.370991] [3: swapper/0: 1] [<ffffffc0005d1c78>] device_create_file+0x74/0xa8 1340[ 1.371087] [3: swapper/0: 1] [<ffffffc0014ae1a4>] sec_misc_init+0x6c/0xc0 1341[ 1.371180] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 1342[ 1.371282] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 1343[ 1.371383] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 1344[ 1.371473] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdceb ]--- 1345[ 1.371561] [3: swapper/0: 1] sec_param_work_init: start 1346[ 1.371635] [3: swapper/0: 1] sec_param_work_init: end 1347[ 1.371711] [3: swapper/0: 1] dmverity_odin_flag_read_init:: Registering /proc/dmverity_odin_flag Interface 1348[ 1.371890] [3: swapper/0: 1] i2c-core: driver [tabla-i2c-core] using legacy suspend method 1349[ 1.371997] [3: swapper/0: 1] i2c-core: driver [tabla-i2c-core] using legacy resume method 1350[ 1.372164] [3: swapper/0: 1] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method 1351[ 1.372273] [3: swapper/0: 1] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method 1352[ 1.373678] [3: swapper/0: 1] qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000 1353[ 1.373794] [3: swapper/0: 1] qce 660000.qcedev: CE device = 0x0 1354[ 1.373794] [3: swapper/0: 1] , IO base, CE = 0xffffff8004540000 1355[ 1.373794] [3: swapper/0: 1] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 1356[ 1.373794] [3: swapper/0: 1] IO base BAM = 0x (null) 1357[ 1.373794] [3: swapper/0: 1] BAM IRQ 100 1358[ 1.373794] [3: swapper/0: 1] Engines Availability = 0x2011053 1359[ 1.374483] [3: swapper/0: 1] sps:BAM 0x0000000000644000 is registered. 1360[ 1.374825] [3: swapper/0: 1] sps:BAM 0x0000000000644000 (va:0xffffff8005540000) enabled: ver:0x27, number of pipes:16 1361[ 1.375264] [3: swapper/0: 1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 100 1362[ 1.384106] [3: swapper/0: 1] qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000 1363[ 1.384237] [3: swapper/0: 1] qcrypto 660000.qcrypto: CE device = 0x0 1364[ 1.384237] [3: swapper/0: 1] , IO base, CE = 0xffffff8005640000 1365[ 1.384237] [3: swapper/0: 1] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 1366[ 1.384237] [3: swapper/0: 1] IO base BAM = 0x (null) 1367[ 1.384237] [3: swapper/0: 1] BAM IRQ 100 1368[ 1.384237] [3: swapper/0: 1] Engines Availability = 0x2011053 1369[ 1.385169] [3: swapper/0: 1] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 100 1370[ 1.391088] [2: cryptomgr_test: 260] FIPS: No test for qcom-ecb(aes) (qcrypto-ecb-aes) 1371[ 1.391203] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-ecb-aes 1372[ 1.391441] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-cbc-aes 1373[ 1.391619] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-ctr-aes 1374[ 1.391781] [2: cryptomgr_test: 263] FIPS: No test for qcom-ecb(des) (qcrypto-ecb-des) 1375[ 1.391891] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-ecb-des 1376[ 1.392062] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-cbc-des 1377[ 1.392223] [2: cryptomgr_test: 265] FIPS: No test for qcom-ecb(des3_ede) (qcrypto-ecb-3des) 1378[ 1.392338] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-ecb-3des 1379[ 1.392520] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-cbc-3des 1380[ 1.392692] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-xts-aes 1381[ 1.392854] [2: cryptomgr_test: 268] FIPS: No test for qcom-sha1 (qcrypto-sha1) 1382[ 1.392957] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-sha1 1383[ 1.393264] [2: cryptomgr_test: 269] FIPS: No test for qcom-sha256 (qcrypto-sha256) 1384[ 1.393370] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-sha256 1385[ 1.393532] [2: cryptomgr_test: 270] FIPS: No test for authenc(hmac(sha1),cbc(aes)) (qcrypto-aead-hmac-sha1-cbc-aes) 1386[ 1.393668] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes 1387[ 1.393851] [2: cryptomgr_test: 271] FIPS: No test for authenc(hmac(sha1),cbc(des)) (qcrypto-aead-hmac-sha1-cbc-des) 1388[ 1.393988] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des 1389[ 1.394162] [2: cryptomgr_test: 272] FIPS: No test for authenc(hmac(sha1),cbc(des3_ede)) (qcrypto-aead-hmac-sha1-cbc-3des) 1390[ 1.394305] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des 1391[ 1.394482] [2: cryptomgr_test: 273] FIPS: No test for authenc(hmac(sha256),cbc(aes)) (qcrypto-aead-hmac-sha256-cbc-aes) 1392[ 1.394624] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes 1393[ 1.394811] [2: cryptomgr_test: 274] FIPS: No test for authenc(hmac(sha256),cbc(des)) (qcrypto-aead-hmac-sha256-cbc-des) 1394[ 1.394952] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des 1395[ 1.395128] [2: cryptomgr_test: 275] FIPS: No test for authenc(hmac(sha256),cbc(des3_ede)) (qcrypto-aead-hmac-sha256-cbc-3des) 1396[ 1.395274] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des 1397[ 1.395451] [2: cryptomgr_test: 276] FIPS: No test for hmac(sha1) (qcrypto-hmac-sha1) 1398[ 1.395558] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-hmac-sha1 1399[ 1.395721] [2: cryptomgr_test: 277] FIPS: No test for hmac(sha256) (qcrypto-hmac-sha256) 1400[ 1.395833] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-hmac-sha256 1401[ 1.395997] [2: cryptomgr_test: 278] FIPS: No test for qcom-ccm(aes) (qcrypto-aes-ccm) 1402[ 1.396105] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-aes-ccm 1403[ 1.396277] [3: swapper/0: 1] qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm 1404[ 1.399189] [3: swapper/0: 1] ICE IRQ = 36 1405[ 1.399400] [3: swapper/0: 1] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed 1406[ 1.399572] [3: swapper/0: 1] ICE IRQ = 45 1407[ 1.403918] [3: swapper/0: 1] UFS get hw_reset gpio 31. 1408[ 1.405414] [3: swapper/0: 1] qcom_ice_get_pdevice: found ice device ffffffc0f7aea600 1409[ 1.405522] [3: swapper/0: 1] qcom_ice_get_pdevice: matching platform device ffffffc0f7ccb400 1410[ 1.406158] [3: swapper/0: 1] scm_call failed: func id 0x42000c02, arginfo: 0x2, args: 0x13, 0x0, 0x0, 0x0, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0 1411[ 1.406970] [3: swapper/0: 1] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get tx_iface_clk err -517 1412[ 1.407092] [3: swapper/0: 1] ufs_qcom_phy_qmp_14nm 627000.ufsphy: failed to get rx_iface_clk err -517 1413[ 1.408086] [3: swapper/0: 1] UFS set on done. 1414[ 1.408575] [3: swapper/0: 1] scsi host0: ufshcd 1415[ 1.412454] [3: swapper/0: 1] qcom_ice 630000.ufsice: QC ICE 2.1.44 device found @0xffffff8001e70000 1416[ 1.431948] [3: swapper/0: 1] SCSI Media Changer driver v0.25 1417[ 1.435564] [0: swapper/0: 1] sps: BAM device 0x0000000007544000 is not registered yet. 1418[ 1.435947] [0: swapper/0: 1] sps:BAM 0x0000000007544000 is registered. 1419[ 1.437351] [0: swapper/0: 1] sps:BAM 0x0000000007544000 (va:0xffffff8005800000) enabled: ver:0x19, number of pipes:24 1420[ 1.439914] [0: swapper/0: 1] fp_spi_clock_get sucess 1421[ 1.440004] [0: swapper/0: 1] msm_spi_probe: disable bam for BLSP tzspi, spi num(6) 1422[ 1.444060] [3: swapper/0: 1] sps:BAM 0x0000000007584000 (va:0xffffff8002240000) enabled: ver:0x19, number of pipes:24 1423[ 1.445822] [3: swapper/0: 1] ese_spi_clock_get sucess 1424[ 1.445902] [3: swapper/0: 1] msm_spi_probe: disable bam for BLSP tzspi, spi num(11) 1425[ 1.447382] [3: swapper/0: 1] tun: Universal TUN/TAP device driver, 1.6 1426[ 1.447474] [3: swapper/0: 1] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> 1427[ 1.447641] [3: swapper/0: 1] PPP generic driver version 2.4.2 1428[ 1.447797] [3: swapper/0: 1] PPP BSD Compression module registered 1429[ 1.447886] [3: swapper/0: 1] PPP Deflate Compression module registered 1430[ 1.448014] [3: swapper/0: 1] PPP MPPE Compression module registered 1431[ 1.448107] [3: swapper/0: 1] NET: Registered protocol family 24 1432[ 1.448272] [3: swapper/0: 1] usbcore: registered new interface driver asix 1433[ 1.448443] [3: swapper/0: 1] usbcore: registered new interface driver ax88179_178a 1434[ 1.448570] [3: swapper/0: 1] usbcore: registered new interface driver cdc_ether 1435[ 1.448684] [3: swapper/0: 1] usbcore: registered new interface driver net1080 1436[ 1.448796] [3: swapper/0: 1] usbcore: registered new interface driver cdc_subset 1437[ 1.448911] [3: swapper/0: 1] usbcore: registered new interface driver zaurus 1438[ 1.449044] [3: swapper/0: 1] usbcore: registered new interface driver cdc_ncm 1439[ 1.454326] [3: swapper/0: 1] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' 1440[ 1.454506] [0: kworker/u8:0: 6] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0 1441[ 1.457703] [3: kworker/3:1: 33] msm_sharedmem: sharedmem_register_qmi: qmi init successful 1442[ 1.469242] [2: kworker/2:0: 17] msm-dwc3 6a00000.ssusb: undefined state 1443[ 1.469351] [2: kworker/2:0: 17] msm-dwc3 6a00000.ssusb: undef_!b_sess_vld 1444[ 1.471798] [3: swapper/0: 1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 1445[ 1.471917] [3: swapper/0: 1] ehci-pci: EHCI PCI platform driver 1446[ 1.472119] [3: swapper/0: 1] usbcore: registered new interface driver usb-storage 1447[ 1.472237] [3: swapper/0: 1] usbcore: registered new interface driver ums-alauda 1448[ 1.472352] [3: swapper/0: 1] usbcore: registered new interface driver ums-cypress 1449[ 1.472477] [3: swapper/0: 1] usbcore: registered new interface driver ums-datafab 1450[ 1.472592] [3: swapper/0: 1] usbcore: registered new interface driver ums-freecom 1451[ 1.472707] [3: swapper/0: 1] usbcore: registered new interface driver ums-isd200 1452[ 1.472819] [3: swapper/0: 1] usbcore: registered new interface driver ums-jumpshot 1453[ 1.472935] [3: swapper/0: 1] usbcore: registered new interface driver ums-karma 1454[ 1.473047] [3: swapper/0: 1] usbcore: registered new interface driver ums-sddr09 1455[ 1.473168] [3: swapper/0: 1] usbcore: registered new interface driver ums-sddr55 1456[ 1.473281] [3: swapper/0: 1] usbcore: registered new interface driver ums-usbat 1457[ 1.473469] [3: swapper/0: 1] usbcore: registered new interface driver usbserial 1458[ 1.473584] [3: swapper/0: 1] usbcore: registered new interface driver usb_ehset_test 1459[ 1.474729] [3: swapper/0: 1] gbridge_init: gbridge_init successs. 1460[ 1.474830] [3: swapper/0: 1] usb_notify: external_notifier_init 1461[ 1.474911] [3: swapper/0: 1] usb_notify: create_external_notify 1462[ 1.475091] [3: swapper/0: 1] usb_notify: ovc_init 1463[ 1.475278] [3: swapper/0: 1] mousedev: PS/2 mouse device common for all mice 1464[ 1.475515] [3: swapper/0: 1] touchkey_init: abov,mc96ft16xx 1465[ 1.476411] [3: swapper/0: 1] abov_tk_probe++ 1466[ 1.476553] [3: swapper/0: 1] abov-touchkey 4-0020: abov_parse_dt: sub_det:1009 1467[ 1.476652] [3: swapper/0: 1] abov-touchkey 4-0020: unable to get gpio_tkey_led_en...ignoring 1468[ 1.476766] [3: swapper/0: 1] abov-touchkey 4-0020: abov_parse_dt: gpio_int:64, gpio_scl:22, gpio_sda:21, gpio_led_en:-2, reg_boot_on:1, fw_name:abov/abov_tk_hero.fw 1469[ 1.478195] [3: swapper/0: 1] [TKEY] abov_power ON, avdd is OFF, vdd_io is ON 1470[ 1.480279] [3: swapper/0: 1] abov-touchkey 4-0020: get_tk_fw_version : fw = 0xf, md = 0x96 1471[ 1.480395] [3: swapper/0: 1] abov-touchkey 4-0020: abov_load_fw : fw = 0xf, md = 0x96, crc = 0xa59a 1472[ 1.480512] [3: swapper/0: 1] abov-touchkey 4-0020: fw_size : 12320 1473[ 1.480598] [3: swapper/0: 1] abov-touchkey 4-0020: abov_load_fw success 1474[ 1.480821] [3: swapper/0: 1] input: sec_touchkey as /devices/soc/soc:i2c@22/i2c-4/4-0020/input/input1 1475[ 1.481013] [3: swapper/0: 1] abov-touchkey 4-0020: no irq_flag 1476[ 1.481357] [3: swapper/0: 1] abov-touchkey 4-0020: abov_tk_probe done 1477[ 1.481587] [3: swapper/0: 1] usbcore: registered new interface driver xpad 1478[ 1.481683] [3: swapper/0: 1] sec_ts_init 1479[ 1.482160] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_probe 1480[ 1.482240] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_power_ctrl: 1 1481[ 1.482419] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_power_ctrl: 3.3V is enabled FALSE 1482[ 1.482576] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_power_ctrl: 1.8V is enabled FALSE 1483[ 1.483006] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_power_ctrl: avdd is enabled[OK] 1484[ 1.483407] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_power_ctrl: vddo is enabled[OK] 1485[ 1.483580] [3: swapper/0: 1] sec_ts 9-0048: skipped to get num_lines property 1486[ 1.483686] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_parse_dt: i2c buffer limit: 256, lcd_id:004044, bringup:0, FW:tsp_sec/sec_hero_octa.fw(1), id:-2,-2, grip:512 1487[ 1.484000] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_probe init resource 1488[ 1.484092] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_pinctrl_configure: ACTIVE 1489[ 1.490102] [3: kworker/3:1: 33] abov-touchkey 4-0020: abov_tk_resume_work 1490[ 1.490226] [3: kworker/3:1: 33] abov-touchkey 4-0020: abov_tk_resume: already power on 1491[ 1.490842] [2: kworker/2:0: 17] qusb_phy_get_tune2_param(): bit_mask:15 efuse based tune2 value:427819008 1492[ 1.490966] [2: kworker/2:0: 17] PHY Tune1:d0,Tune2:43,Tune3:81,Tune4:c0 1493[ 1.505127] [2: kworker/2:0: 17] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout 1494[ 1.505239] [2: kworker/2:0: 17] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969 1495[ 1.509798] [2: kworker/2:0: 17] msm-dwc3 6a00000.ssusb: DWC3 in low power mode 1496[ 1.509894] [2: kworker/2:0: 17] msm-dwc3 6a00000.ssusb: Undef NoUSB 1497[ 1.560516] [3: swapper/0: 1] i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x15 (ok) 1498[ 1.561132] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_wait_for_ready: 01, 0C, 10, 00, 00, 00, 00, 00 [0] 1499[ 1.561250] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_probe power enable 1500[ 1.561638] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_read_calibration_report: count:8, pass count:8, fail count:0, status:0xA2 1501[ 1.561779] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_firmware_update_on_probe: initial firmware update tsp_sec/sec_hero_octa.fw, cal:A2 1502[ 1.561931] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_firmware_update_on_probe: request firmware done! size = 119956 1503[ 1.562063] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_save_version_of_bin: img_ver of bin = 5.10.1.21 1504[ 1.562178] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_save_version_of_bin: para_ver of bin = 5.10.1.7 1505[ 1.567787] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_save_version_of_ic: IC Image version info : 5.10.1.21 1506[ 1.567787] [3: swapper/0: 1] 1507[ 1.568264] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_save_version_of_ic: IC parameter version info : 5.10.1.7 1508[ 1.568264] [3: swapper/0: 1] 1509[ 1.568685] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_read_information: AC, A5, 52 1510[ 1.569343] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_read_information: AP/BL(AC), DEV1:A5, DEV2:52, nTX:F, nRX:1A, rY:4096, rX:4096 1511[ 1.569658] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_read_information: STATUS : 20 1512[ 1.570040] [3: swapper/0: 1] input: sec_touchscreen as /devices/soc/75b7000.i2c/i2c-9/9-0048/input/input2 1513[ 1.570177] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_input_open 1514[ 1.570258] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_start_device 1515[ 1.570341] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_pinctrl_configure: ACTIVE 1516[ 1.570437] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_start_device: already power on 1517[ 1.570592] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_probe request_irq = 356 1518[ 1.571031] [3: swapper/0: 1] sec_ts 9-0048: secure_touch_init 1519[ 1.571794] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_check_custom_library: (2) G930, || 00, 04, 00, 08, || 20, 00 1520[ 1.571923] [3: swapper/0: 1] sec_ts 9-0048: sec_ts_check_custom_library: use SPONGE 1521[ 1.572129] [3: swapper/0: 1] fts_driver_init 1522[ 1.574137] [3: swapper/0: 1] qcom,qpnp-rtc qpnp-rtc-ffffffc0f7d3c000: rtc core: registered qpnp_rtc as rtc0 1523[ 1.574433] [3: swapper/0: 1] i2c /dev entries driver 1524[ 1.607519] [3: swapper/0: 1] vmem: Up and running with 4 banks of memory from [mem size 0x3f081dd3c9 64bit pref disabled] 1525[ 1.621659] [3: swapper/0: 1] msm_actuator_i2c_probe:1789 msm_actuator_i2c_probe: succeeded 1526[ 1.625062] [3: swapper/0: 1] MSM-SENSOR-INIT msm_sensor_init_module:797 MSM_SENSOR_INIT_MODULE : X 1527[ 1.627416] [3: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0 1528[ 1.627535] [0: kworker/u8:0: 6] ufs_get_device_info: vendor_desc[4]=0x1. setting UFS journal tag support to 1. 1529[ 1.627681] [3: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0 1530[ 1.627976] [3: swapper/0: 1] msm_sensor_init_default_params:1707 clk_count: 4 1531[ 1.628538] [3: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0 1532[ 1.628665] [3: swapper/0: 1] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0 1533[ 1.628985] [3: swapper/0: 1] msm_sensor_init_default_params:1707 clk_count: 4 1534[ 1.629472] [3: swapper/0: 1] msm_sensor_init_default_params:1707 clk_count: 2 1535[ 1.629567] [0: kworker/u8:0: 6] ufs_get_device_info: UNIQUE NUMBER = ce10160a79ae792405 , LT: 0x11 1536[ 1.629821] [3: swapper/0: 1] [msm_ois_init_module::2518] Enter 1537[ 1.629950] [3: swapper/0: 1] Error: Driver 'qcom,ois' is already registered, aborting... 1538[ 1.630156] [3: swapper/0: 1] [msm_ois_init_module::2524] msm_ois_init_module:2524 platform driver probe rc -16 1539[ 1.630321] [3: swapper/0: 1] [msm_ois_i2c_probe::1678] Enter 1540[ 1.630402] [3: swapper/0: 1] [msm_ois_i2c_probe::1705] client = 0xffffffc0f7d7a000 1541[ 1.630504] [3: swapper/0: 1] [msm_ois_i2c_probe::1709] cell-index 0, rc 0 1542[ 1.630596] [3: swapper/0: 1] [msm_ois_i2c_probe::1718] msm_ois_i2c_probe: check unuse-gpio flag(1) 1543[ 1.630718] [3: swapper/0: 1] [msm_ois_i2c_probe::1753] ois_ctrl_t->cam_name: 0 1544[ 1.630929] [3: swapper/0: 1] [msm_ois_i2c_probe::1782] Succeded Exit 1545[ 1.631018] [0: kworker/u8:0: 6] ufshcd 624000.ufshc: ufshcd_enable_ee: ee_ctrl_mask=0x2, mask=0x4. val=0x6. 1546[ 1.631193] [3: swapper/0: 1] [msm_ois_init_module::2533] msm_ois_init_module:2533 i2c_add_driver rc 0 1547[ 1.632347] [0: kworker/u8:0: 6] ufshcd 624000.ufshc: ufshcd_enable_ee: EES = 0x6. 1548[ 1.636071] [0: kworker/u8:0: 6] ufshcd 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2 1549[ 1.636715] [3: swapper/0: 1] MSM-CPP cpp_init_hardware:1175 CPP HW Version: 0x60000000 1550[ 1.636831] [3: swapper/0: 1] MSM-CPP cpp_init_hardware:1196 stream_cnt:0 1551[ 1.636928] [0: kworker/u8:0: 6] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1552[ 1.638190] [0: kworker/u8:0: 6] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1553[ 1.639365] [0: kworker/u8:0: 6] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1554[ 1.640728] [0: kworker/u8:2: 50] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1555[ 1.641718] [0: kworker/u8:2: 50] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1556[ 1.642363] [0: kworker/u8:2: 50] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1557[ 1.642965] [0: kworker/u8:2: 50] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 0009 PQ: 0 ANSI: 6 1558[ 1.644095] [2: kworker/u8:4: 321] sd 0:0:0:0: [sda] sd_revalidate_disk 1559[ 1.644300] [2: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1560[ 1.644440] [2: kworker/u8:4: 321] sd 0:0:0:0: [sda] 16384-byte physical blocks 1561[ 1.644814] [2: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: got buffers... 1562[ 1.644930] [2: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: lbpvpd1, lbpu1, lbpws0, lbpws100. 1563[ 1.645223] [2: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: got buffers... ret=0. 1564[ 1.645342] [2: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: buffer[3]=0x3c, max_xfer_length=0xffff. 1565[ 1.645473] [2: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1566[ 1.645789] [0: kworker/u8:2: 50] sd 0:0:0:1: [sdb] sd_revalidate_disk 1567[ 1.645959] [1: kworker/u8:4: 321] [TEST] sd_read_block_characteristics: sda: got buffers... rot=0x1. 1568[ 1.646081] [2: kworker/u8:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk 1569[ 1.646169] [1: kworker/u8:4: 321] __msm_jpeg_init:1540] Jpeg Device id 0 1570[ 1.646259] [1: kworker/u8:4: 321] [TEST] sd_revalidate_disk:2890. sda: sdkp->device->sector_size=4096, provisioning_mode=1. 1571[ 1.646403] [2: kworker/u8:3: 51] sd 0:0:0:3: [sdd] sd_revalidate_disk 1572[ 1.646515] [2: kworker/u8:0: 6] __msm_jpeg_init:1540] Jpeg Device id 2 1573[ 1.646602] [2: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 1574[ 1.646711] [1: kworker/u8:3: 51] __msm_jpeg_init:1540] Jpeg Device id 3 1575[ 1.646796] [1: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 1576[ 1.646901] [2: kworker/u8:0: 6] sd 0:0:0:2: [sdc] 16384-byte physical blocks 1577[ 1.646996] [1: kworker/u8:3: 51] sd 0:0:0:3: [sdd] 16384-byte physical blocks 1578[ 1.647132] [1: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 1579[ 1.647252] [1: kworker/u8:2: 50] sd 0:0:0:1: [sdb] 16384-byte physical blocks 1580[ 1.647442] [2: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: got buffers... 1581[ 1.647548] [0: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: got buffers... 1582[ 1.647682] [2: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: lbpvpd1, lbpu1, lbpws0, lbpws100. 1583[ 1.647847] [0: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: lbpvpd1, lbpu1, lbpws0, lbpws100. 1584[ 1.647969] [3: kworker/u8:4: 321] [TEST] sd_read_write_same: sda: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1585[ 1.648128] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: got buffers... ret=0. 1586[ 1.648236] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: buffer[3]=0x3c, max_xfer_length=0xffff. 1587[ 1.648362] [1: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 1588[ 1.648728] [2: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: got buffers... ret=0. 1589[ 1.648831] [1: kworker/u8:0: 6] [TEST] sd_read_block_characteristics: sdc: got buffers... rot=0x1. 1590[ 1.648945] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: got buffers... 1591[ 1.649052] [1: kworker/u8:0: 6] [TEST] sd_revalidate_disk:2890. sdc: sdkp->device->sector_size=4096, provisioning_mode=1. 1592[ 1.649191] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: lbpvpd1, lbpu1, lbpws0, lbpws100. 1593[ 1.649323] [2: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: buffer[3]=0x3c, max_xfer_length=0xffff. 1594[ 1.649449] [2: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 1595[ 1.649708] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: got buffers... ret=0. 1596[ 1.649850] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: buffer[3]=0x3c, max_xfer_length=0xffff. 1597[ 1.650015] [1: kworker/u8:0: 6] [TEST] sd_read_write_same: sdc: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1598[ 1.650149] [0: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 1599[ 1.650282] [1: kworker/u8:3: 51] [TEST] sd_read_block_characteristics: sdd: got buffers... rot=0x1. 1600[ 1.650410] [1: kworker/u8:3: 51] [TEST] sd_revalidate_disk:2890. sdd: sdkp->device->sector_size=4096, provisioning_mode=1. 1601[ 1.650554] [0: kworker/u8:2: 50] [TEST] sd_read_block_characteristics: sdb: got buffers... rot=0x1. 1602[ 1.650677] [0: kworker/u8:2: 50] [TEST] sd_revalidate_disk:2890. sdb: sdkp->device->sector_size=4096, provisioning_mode=1. 1603[ 1.651418] [1: kworker/u8:3: 51] [TEST] sd_read_write_same: sdd: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1604[ 1.651545] [0: kworker/u8:2: 50] [TEST] sd_read_write_same: sdb: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1605[ 1.652426] [3: swapper/0: 1] msm_fd_hw_set_dt_parms_by_name: Error property does not exist 1606[ 1.670068] [3: kworker/3:1: 33] sec_ts 9-0048: get_tsp_nvm_data, offset:0 1607[ 1.750046] [3: swapper/0: 1] msm_fd aa4000.qcom,fd: Face detection halt timeout 1608[ 1.751808] [3: swapper/0: 1] 6I2C radio driver for rtc6213n FM Tuner, Version 1.0.1 1609[ 1.751916] [3: swapper/0: 1] 6I2C radio driver for rtc6213n FM Tuner, Version 1.0.1 1610[ 1.757026] [3: swapper/0: 1] rtc6213n 23-0064: rtc6213n_i2c_probe DeviceID=0x1688 ChipID=0xffff 1611[ 1.757189] [3: swapper/0: 1] rtc6213n 23-0064: rtc6213n_i2c_probe DeviceID=0x1688 ChipID=0xffff 1612[ 1.759962] [3: swapper/0: 1] unable to find DT imem DLOAD mode node 1613[ 1.761918] [3: swapper/0: 1] unable to find DT imem EDLOAD mode node 1614[ 1.762935] [3: swapper/0: 1] set_dload_mode <1> ( 8f0948 ) 1615[ 1.765565] [3: swapper/0: 1] sec_therm_probe: ret(-517) 1616[ 1.765668] [3: swapper/0: 1] platform soc:sec_thermistor: Driver sec-thermistor requests probe deferral 1617[ 1.797122] [3: swapper/0: 1] device-mapper: uevent: version 1.0.3 1618[ 1.797387] [3: swapper/0: 1] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected] 1619[ 1.797631] [3: swapper/0: 1] device-mapper: req-crypt: dm-req-crypt successfully initalized. 1620[ 1.797631] [3: swapper/0: 1] 1621[ 1.797790] [3: swapper/0: 1] [BT] bcm4359_bluetooth_init 1622[ 1.799235] [3: swapper/0: 1] [BT] bcm4359_bluetooth_probe 1623[ 1.799314] [3: swapper/0: 1] [BT] bcm4359 dt_info 1624[ 1.799536] [3: swapper/0: 1] [BT] bt_en pin is 1022 1625[ 1.799607] [3: swapper/0: 1] [BT] bcm4359 Succ pinctrl 1626[ 1.800289] [3: swapper/0: 1] Bluetooth: BlueSleep Mode Driver Ver 1.1 1627[ 1.801289] [3: swapper/0: 1] bluesleep probe 1628[ 1.801289] [3: swapper/0: 1] [BT] 1629[ 1.801456] [3: swapper/0: 1] pinctrl was acquired [BT] 1630[ 1.801732] [3: swapper/0: 1] [BT] hostwake gpio is 124 [BT] 1631[ 1.801847] [3: swapper/0: 1] [BT] btwake gpio is 117 [BT] 1632[ 1.801941] [3: swapper/0: 1] [BT] hostwake irq is 357 [BT] 1633[ 1.802103] [3: swapper/0: 1] [BT] Bluesleep probe success 1634[ 1.802753] [3: swapper/0: 1] sdhci: Secure Digital Host Controller Interface driver 1635[ 1.802855] [3: swapper/0: 1] sdhci: Copyright(c) Pierre Ossman 1636[ 1.802939] [3: swapper/0: 1] sdhci-pltfm: SDHCI platform and OF driver helper 1637[ 1.803932] [3: swapper/0: 1] sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled 1638[ 1.804105] [3: swapper/0: 1] sdhci_msm 74a4900.sdhci: tflash is enabled(89). 1639[ 1.817369] [3: swapper/0: 1] sdhci_msm_probe : Change sysfs Card Detect 1640[ 1.818881] [3: swapper/0: 1] sdhci_msm 74a4900.sdhci: No vmmc regulator found 1641[ 1.818979] [3: swapper/0: 1] sdhci_msm 74a4900.sdhci: No vqmmc regulator found 1642[ 1.820310] [3: swapper/0: 1] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode 1643[ 1.824280] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_init 1644[ 1.825000] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_probe 1645[ 1.825091] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt 1646[ 1.825795] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, led_w 1647[ 1.825890] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, led_r 1648[ 1.825984] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, led_g 1649[ 1.826077] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, led_b 1650[ 1.826173] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, device_type = 0 1651[ 1.826280] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, normal_powermode_current = a 1652[ 1.826397] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, low_powermode_current = 2 1653[ 1.826511] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, brightness_ratio_r = 140 1654[ 1.826624] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, brightness_ratio_g = 32 1655[ 1.826734] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_parse_dt, brightness_ratio_b = aa 1656[ 1.826845] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_probe : octa_color=0 device_type=0 1657[ 1.826959] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_probe 1 1658[ 1.827176] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_get 1659[ 1.827271] [3: swapper/0: 1] leds led_w: max77854_rgb_number() returns -19. 1660[ 1.827423] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_get 1661[ 1.827508] [3: swapper/0: 1] leds led_r: max77854_rgb_number() returns -19. 1662[ 1.827633] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_get 1663[ 1.827717] [3: swapper/0: 1] leds led_g: max77854_rgb_number() returns -19. 1664[ 1.827850] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_get 1665[ 1.827932] [3: swapper/0: 1] leds led_b: max77854_rgb_number() returns -19. 1666[ 1.828070] [3: swapper/0: 1] leds-max77854-rgb: max77854_rgb_probe done 1667[ 1.829116] [3: swapper/0: 1] [LED] s2mpb02_led_probe 2 leds 1668[ 1.829201] [3: swapper/0: 1] s2mpb02_led_probe led0 setup ... 1669[ 1.830574] [3: swapper/0: 1] s2mpb02_led_probe led1 setup ... 1670[ 1.831781] [3: swapper/0: 1] <s2mpb02_led_probe> end 1671[ 1.834435] [3: swapper/0: 1] hidraw: raw HID events driver (C) Jiri Kosina 1672[ 1.836206] [3: swapper/0: 1] Successfully registered hid_synaptics_driver 1673[ 1.836411] [3: swapper/0: 1] usbcore: registered new interface driver usbhid 1674[ 1.836513] [3: swapper/0: 1] usbhid: USB HID core driver 1675[ 1.836941] [3: swapper/0: 1] ashmem: initialized 1676[ 1.837051] [3: swapper/0: 1] logger: created 2048K log 'log_main' 1677[ 1.837177] [3: swapper/0: 1] logger: created 512K log 'log_events' 1678[ 1.837296] [3: swapper/0: 1] logger: created 1024K log 'log_radio' 1679[ 1.837422] [3: swapper/0: 1] logger: created 512K log 'log_system' 1680[ 1.837513] [3: swapper/0: 1] sec_getlog_supply_loggerinfo: 0xffffffc001f22ca8 0xffffffc002122ca8 0xffffffc002222ca8 0xffffffc0022a2ca8 1681[ 1.838899] [3: swapper/0: 1] qcom,qpnp-power-on qpnp-power-on-ffffffc0f7d1e400: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot 1682[ 1.839097] [3: swapper/0: 1] qcom,qpnp-power-on qpnp-power-on-ffffffc0f7d1e400: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown) 1683[ 1.839343] [3: swapper/0: 1] qcom,qpnp-power-on qpnp-power-on-ffffffc0f7d1e400: switch_powerkey is set for 116 1684[ 1.839595] [3: swapper/0: 1] input: qpnp_pon as /devices/virtual/input/input3 1685[ 1.840735] [3: swapper/0: 1] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm 1686[ 1.845520] [3: swapper/0: 1] sps:BAM 0x0000000006b04000 is registered. 1687[ 1.852232] [3: swapper/0: 1] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. 1688[ 1.854017] [3: swapper/0: 1] arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered. 1689[ 1.854173] [3: swapper/0: 1] arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered. 1690[ 1.856653] [3: swapper/0: 1] m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered. 1691[ 1.861228] [3: swapper/0: 1] devfreq soc:qcom,cpubw: Couldn't update frequency transition information. 1692[ 1.861423] [3: swapper/0: 1] devfreq soc:qcom,mincpubw: Couldn't update frequency transition information. 1693[ 1.861611] [3: swapper/0: 1] devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information. 1694[ 1.861795] [3: swapper/0: 1] devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information. 1695[ 1.862860] [3: swapper/0: 1] devfreq soc:qcom,m4m: Couldn't update frequency transition information. 1696[ 1.864798] [3: swapper/0: 1] vbus_notifier_init 1697[ 1.864836] [3: swapper/0: 1] muic_notifier_init 1698[ 1.864903] [3: swapper/0: 1] muic-max77833:max77833_muic_init 1699[ 1.865191] [3: swapper/0: 1] create_coagent_thread: 1700[ 1.865317] [3: swapper/0: 1] muic-universal:muic_init 1701[ 1.865346] [2: coagent1: 369] coagent_thread: 1th thread is running... 1702[ 1.865384] [2: coagent1: 369] init_fifo_test: fifo module insert 1703[ 1.865416] [2: coagent1: 369] init_fifo_test: queue size:1024 1704[ 1.865445] [2: coagent1: 369] init_fifo_test: queue_available1: 1024 1705[ 1.865478] [2: coagent1: 369] init_fifo_test: queue len: 2 1706[ 1.865507] [2: coagent1: 369] init_fifo_test: queue_available: 1022 1707[ 1.865539] [2: coagent1: 369] coagent_thread: [ 0 - 1/1023] cmd=5, param=4 1708[ 1.865574] [2: coagent1: 369] coagent_thread: [ 1 - 0/1024] cmd=6, param=5 1709[ 1.865609] [2: coagent1: 369] coagent_thread: The copied item is not one(0) 1710[ 1.866100] [3: swapper/0: 1] muic-universal:muic_probe 1711[ 1.866133] [3: swapper/0: 1] of_muic_dt: chip_name is max,max77854 1712[ 1.866167] [3: swapper/0: 1] of_muic_dt: muic,undefined_range[T] 1713[ 1.866287] [3: swapper/0: 1] of_muic_dt: irq-gpio: 38 ) 1714[ 1.866316] [3: swapper/0: 1] of_muic_dt: No gpio_uart_sel defined. 1715[ 1.866354] [3: swapper/0: 1] of_update_supported_list 1716[ 1.866549] [3: swapper/0: 1] muic-universal:of_update_supported_list No support list-variant dt node'[-22] 1717[ 1.866600] [3: swapper/0: 1] muic_probe: muic irq_gpio = 389 1718[ 1.866635] [3: swapper/0: 1] muic_probe: muic i2c client dummy at 0x25 1719[ 1.866674] [3: swapper/0: 1] muic_probe: mfd i2c client max77854 at 0x66 1720[ 1.866712] [3: swapper/0: 1] muic_probe: fuel i2c client dummy at 0x36 1721[ 1.866752] [3: swapper/0: 1] muic_probe: chg i2c client dummy at 0x69 1722[ 1.866789] [3: swapper/0: 1] muic_probe: VPS_TYPE=1 1723[ 1.866819] [3: swapper/0: 1] muic_probe: gpio_uart_sel is not supported. 1724[ 1.866858] [3: swapper/0: 1] muic_init_gpio_cb (3) 1725[ 1.866889] [3: swapper/0: 1] muic_init_gpio_cb: usb_path(PDA), uart_path(AP) 1726[ 1.867008] [3: swapper/0: 1] muic_notifier_register: listener=0 register 1727[ 1.867046] [3: swapper/0: 1] muic_handle_dock_notification: ignore(59) 1728[ 1.867080] [3: swapper/0: 1] muic_init_switch_dev_cb: done 1729[ 1.867109] [3: swapper/0: 1] switch_sel : 0x0003 1730[ 1.867136] [3: swapper/0: 1] Enable rustproof mode 1731[ 1.867163] [3: swapper/0: 1] AFC mode enabled 1732[ 1.867189] [3: swapper/0: 1] chip_name : max,max77854 1733[ 1.867216] [3: swapper/0: 1] [0] : max,max77854 1734[ 1.867243] [3: swapper/0: 1] muic_register_regmap: max77854-MUIC registered. 1735[ 1.868055] [3: swapper/0: 1] muic_rev_info [ID] vendor=0x0, ver=0x16 1736[ 1.868088] [3: swapper/0: 1] muic_init_chip 1737[ 1.868113] [3: swapper/0: 1] [01] read. 1738[ 1.868891] [3: swapper/0: 1] [02] read. 1739[ 1.869655] [3: swapper/0: 1] [03] read. 1740[ 1.870456] [3: swapper/0: 1] [16] : 0xb2 1741[ 1.871036] [3: swapper/0: 1] muic-universal:max77854_get_sizeof_regmap 1742[ 1.871074] [3: swapper/0: 1] muic_update_regmapdata REG_END:25 size:26 1743[ 1.884442] [3: swapper/0: 1] muic-hv:hv_initialize 1744[ 1.884530] [3: swapper/0: 1] muic-universal:of_muic_hv_dt phv->qc-hv:0x09 1745[ 1.884570] [3: swapper/0: 1] muic-universal:of_muic_hv_dt phv->tx_data:0x46 1746[ 1.884610] [3: swapper/0: 1] muic-hv:hv_configure_AFC 1747[ 1.884640] [3: swapper/0: 1] muic-hv:max77854_afc_muic_irq_init 1748[ 1.898173] [3: swapper/0: 1] muic-hv:max77854_afc_muic_irq_init vdnmon(409), mrxrdy(415), mpnack(411), vbadc(408) 1749[ 1.898231] [3: swapper/0: 1] muic-universal:max77854_muic_set_afc_ready afc_muic_ready[0->0] 1750[ 1.898278] [3: swapper/0: 1] muic-hv:max77854_hv_muic_initialize 1751[ 1.899065] [3: swapper/0: 1] coagent_update_ctx 1752[ 1.899094] [3: swapper/0: 1] max,max77854:muic_irq_init 1753[ 1.899124] [3: swapper/0: 1] muic_irq_init requesting irq no = 402 1754[ 1.902545] [3: swapper/0: 1] muic_irq_init requesting irq no = 401 1755[ 1.905952] [3: swapper/0: 1] muic_irq_init requesting irq no = 400 1756[ 1.909361] [3: swapper/0: 1] muic_irq_init requesting irq no = 403 1757[ 1.912773] [3: swapper/0: 1] muic_irq_init requesting irq no = 407 1758[ 1.916181] [3: swapper/0: 1] max,max77854:muic_init_detect 1759[ 1.916212] [3: swapper/0: 1] muic-universal:max77854_muic_irq_handler irq:-1 1760[ 1.920134] [3: kworker/3:1: 33] sec_ts 9-0048: get_tsp_nvm_data: data:89 1761[ 1.920261] [3: kworker/3:1: 33] sec_ts 9-0048: get_tsp_nvm_data, offset:1 1762[ 1.923217] [3: swapper/0: 1] muic-universal:muic_detect_dev ST[0x1f 0x41 0x00] CT[0x00 0x3b 0x00 0xb2] HVCT[0x00 0x00] 1763[ 1.923269] [3: swapper/0: 1] muic-universal:muic_detect_dev adc:1f vbvolt:01 chgtyp:01 adcerr:00 adclow:00 chgdetrun:00 1764[ 1.923321] [3: swapper/0: 1] resolve_dev_based_on_adc_chgtype: adc=1f, chgtyp=01 1765[ 1.923359] [3: swapper/0: 1] muic-universal:vps_find_attached_dev vps table match found at [1]mdev:1(USB) 1766[ 1.923404] [3: swapper/0: 1] vps_find_attached_dev:Supported. 1767[ 1.923436] [3: swapper/0: 1] muic-universal:muic_handle_attach attached_dev:59 new_dev:1 adc:0x1f, vbvolt:01 1768[ 1.923483] [3: swapper/0: 1] muic-universal:attach_usb 1769[ 1.923512] [3: swapper/0: 1] muic-universal:switch_to_ap_usb 1770[ 1.923542] [3: swapper/0: 1] muic-universal:com_to_usb_ap 1771[ 1.926384] [3: swapper/0: 1] -muic_regmap_trace w 09=[00:09+0010000c]CONTROL1 1772[ 1.927923] [3: swapper/0: 1] muic-universal:attach_usb COMP2Sw:0x1, COMN1Sw:0x1 1773[ 1.927961] [3: swapper/0: 1] muic_notifier_attach_attached_dev: (1) 1774[ 1.927994] [3: swapper/0: 1] muic_notifier_notify: CMD=1, DATA=1 1775[ 1.928026] [3: swapper/0: 1] muic_handle_dock_notification: ignore(1) 1776[ 1.928060] [3: swapper/0: 1] muic_notifier_notify: notify done(0x0) 1777[ 1.928093] [3: swapper/0: 1] hv_update_status:muic-hv mdev 0->1 1778[ 1.928124] [3: swapper/0: 1] muic-universal:update_jig_state update_jig_state : 0 1779[ 1.928162] [3: swapper/0: 1] muic_jig_uart_cb: MUIC uart type(0) 1780[ 1.928195] [3: swapper/0: 1] muic_probe: is_afc_muic_ready=0 1781[ 1.928227] [3: swapper/0: 1] muic_register_usb_notifier: Registering EXTERNAL_NOTIFY_DEV_MUIC. 1782[ 1.928270] [3: swapper/0: 1] usb_notify: usb_external_notify_register: listener=(muic)0 register 1783[ 1.928312] [3: swapper/0: 1] muic_register_usb_notifier: done. 1784[ 1.929116] [3: swapper/0: 1] coresight-fuse 7602c.fuse: Fuse initialized 1785[ 1.929667] [3: swapper/0: 1] coresight-cti: probe of 3010000.cti failed with error -1 1786[ 1.929730] [3: swapper/0: 1] coresight-cti: probe of 3011000.cti failed with error -1 1787[ 1.929791] [3: swapper/0: 1] coresight-cti: probe of 3012000.cti failed with error -1 1788[ 1.929851] [3: swapper/0: 1] coresight-cti: probe of 3013000.cti failed with error -1 1789[ 1.929912] [3: swapper/0: 1] coresight-cti: probe of 3014000.cti failed with error -1 1790[ 1.929973] [3: swapper/0: 1] coresight-cti: probe of 3015000.cti failed with error -1 1791[ 1.930250] [3: swapper/0: 1] coresight-cti: probe of 3016000.cti failed with error -1 1792[ 1.930316] [3: swapper/0: 1] coresight-cti: probe of 3017000.cti failed with error -1 1793[ 1.930376] [3: swapper/0: 1] coresight-cti: probe of 3018000.cti failed with error -1 1794[ 1.930435] [3: swapper/0: 1] coresight-cti: probe of 3019000.cti failed with error -1 1795[ 1.930495] [3: swapper/0: 1] coresight-cti: probe of 301a000.cti failed with error -1 1796[ 1.930554] [3: swapper/0: 1] coresight-cti: probe of 301b000.cti failed with error -1 1797[ 1.930614] [3: swapper/0: 1] coresight-cti: probe of 301c000.cti failed with error -1 1798[ 1.930673] [3: swapper/0: 1] coresight-cti: probe of 301d000.cti failed with error -1 1799[ 1.930732] [3: swapper/0: 1] coresight-cti: probe of 301e000.cti failed with error -1 1800[ 1.930793] [3: swapper/0: 1] coresight-cti: probe of 3820000.cti failed with error -1 1801[ 1.930853] [3: swapper/0: 1] coresight-cti: probe of 3920000.cti failed with error -1 1802[ 1.930912] [3: swapper/0: 1] coresight-cti: probe of 3a20000.cti failed with error -1 1803[ 1.930972] [3: swapper/0: 1] coresight-cti: probe of 3b20000.cti failed with error -1 1804[ 1.931032] [3: swapper/0: 1] coresight-cti: probe of 38a0000.cti failed with error -1 1805[ 1.931092] [3: swapper/0: 1] coresight-cti: probe of 39a0000.cti failed with error -1 1806[ 1.931152] [3: swapper/0: 1] coresight-cti: probe of 3aa0000.cti failed with error -1 1807[ 1.931213] [3: swapper/0: 1] coresight-cti: probe of 3ba0000.cti failed with error -1 1808[ 1.931272] [3: swapper/0: 1] coresight-cti: probe of 38b0000.cti failed with error -1 1809[ 1.931332] [3: swapper/0: 1] coresight-cti: probe of 3ab0000.cti failed with error -1 1810[ 1.931393] [3: swapper/0: 1] coresight-cti: probe of 3ad0000.cti failed with error -1 1811[ 1.931452] [3: swapper/0: 1] coresight-cti: probe of 39c0000.cti failed with error -1 1812[ 1.931512] [3: swapper/0: 1] coresight-cti: probe of 39d0000.cti failed with error -1 1813[ 1.931571] [3: swapper/0: 1] coresight-cti: probe of 38d0000.cti failed with error -1 1814[ 1.931631] [3: swapper/0: 1] coresight-cti: probe of 39f0000.cti failed with error -1 1815[ 1.931690] [3: swapper/0: 1] coresight-cti: probe of 3030000.cti failed with error -1 1816[ 1.931750] [3: swapper/0: 1] coresight-cti: probe of 3031000.cti failed with error -1 1817[ 1.931810] [3: swapper/0: 1] coresight-cti: probe of 3180000.cti failed with error -1 1818[ 1.931869] [3: swapper/0: 1] coresight-cti: probe of 3044000.cti failed with error -1 1819[ 1.931929] [3: swapper/0: 1] coresight-cti: probe of 3048000.cti failed with error -1 1820[ 1.931988] [3: swapper/0: 1] coresight-cti: probe of 3040000.cti failed with error -1 1821[ 1.932047] [3: swapper/0: 1] coresight-cti: probe of 3141000.cti failed with error -1 1822[ 1.932107] [3: swapper/0: 1] coresight-cti: probe of 3142000.cti failed with error -1 1823[ 1.932723] [3: swapper/0: 1] coresight-csr: probe of 3001000.csr failed with error -1 1824[ 1.933205] [3: swapper/0: 1] coresight-tmc: probe of 3028000.tmc failed with error -1 1825[ 1.933272] [3: swapper/0: 1] coresight-tmc: probe of 3027000.tmc failed with error -1 1826[ 1.933763] [3: swapper/0: 1] coresight-tpiu: probe of 3020000.tpiu failed with error -1 1827[ 1.934255] [3: swapper/0: 1] coresight-funnel: probe of 3025000.funnel failed with error -1 1828[ 1.934320] [3: swapper/0: 1] coresight-funnel: probe of 3021000.funnel failed with error -1 1829[ 1.934383] [3: swapper/0: 1] coresight-funnel: probe of 3022000.funnel failed with error -1 1830[ 1.934445] [3: swapper/0: 1] coresight-funnel: probe of 3023000.funnel failed with error -1 1831[ 1.934507] [3: swapper/0: 1] coresight-funnel: probe of 3bc0000.funnel failed with error -1 1832[ 1.934567] [3: swapper/0: 1] coresight-funnel: probe of 39b0000.funnel failed with error -1 1833[ 1.934629] [3: swapper/0: 1] coresight-funnel: probe of 3bb0000.funnel failed with error -1 1834[ 1.934690] [3: swapper/0: 1] coresight-funnel: probe of 3184000.funnel failed with error -1 1835[ 1.934752] [3: swapper/0: 1] coresight-funnel: probe of 3034000.funnel failed with error -1 1836[ 1.935251] [3: swapper/0: 1] coresight-replicator: probe of 3026000.replicator failed with error -1 1837[ 1.935763] [3: swapper/0: 1] coresight-tpda: probe of 3003000.tpda failed with error -1 1838[ 1.935827] [3: swapper/0: 1] coresight-tpda: probe of 39e0000.tpda failed with error -1 1839[ 1.936353] [3: swapper/0: 1] coresight-tpdm: probe of 3038000.tpdm failed with error -1 1840[ 1.936418] [3: swapper/0: 1] coresight-tpdm: probe of 3054000.tpdm failed with error -1 1841[ 1.936479] [3: swapper/0: 1] coresight-tpdm: probe of 304c000.tpdm failed with error -1 1842[ 1.936540] [3: swapper/0: 1] coresight-tpdm: probe of 3185000.tpdm failed with error -1 1843[ 1.936600] [3: swapper/0: 1] coresight-tpdm: probe of 3050000.tpdm failed with error -1 1844[ 1.936660] [3: swapper/0: 1] coresight-tpdm: probe of 3004000.tpdm failed with error -1 1845[ 1.936720] [3: swapper/0: 1] coresight-tpdm: probe of 38e0000.tpdm failed with error -1 1846[ 1.937230] [3: swapper/0: 1] coresight-stm: probe of 3002000.stm failed with error -1 1847[ 1.937775] [3: swapper/0: 1] coresight-hwevent: probe of 98200c0.hwevent failed with error -1 1848[ 1.938484] [3: swapper/0: 1] coresight-qpdi 7a1000.qpdi: CoreSight QPDI driver initialized 1849[ 1.938683] [3: swapper/0: 1] [NXP-P61] : Entry : p61_dev_init 1850[ 1.938747] [3: swapper/0: 1] [NXP-P61] : p61_probe chip select : 0 , bus number = 11 1851[ 1.938842] [3: swapper/0: 1] p61_parse_dt: mosipin=48, 48, 60, 48 1852[ 1.938875] [3: swapper/0: 1] p61_probe: tz_mode=0, isGpio_cfgDone:0 1853[ 1.938907] [3: swapper/0: 1] p61_probe: eSE Secured system 1854[ 1.938977] [3: swapper/0: 1] [NXP-P61] : p61_probe finished... 1855[ 1.939021] [3: swapper/0: 1] Loading pn547 driver 1856[ 1.939352] [3: swapper/0: 1] pn547_probe entered 1857[ 1.939437] [3: swapper/0: 1] pn547_parse_dt: irq : 126, ven : 62, firm : 63 1858[ 1.939483] [3: swapper/0: 1] pn547_probe ldo_flag = 0 1859[ 1.939511] [3: swapper/0: 1] pn547_regulator_onoff - onoff = 1 1860[ 1.939581] [3: swapper/0: 1] pn547_regulator_onoff - onoff = 1 1861[ 1.941067] [3: swapper/0: 1] pn547_probe : IRQ num 359 1862[ 1.941146] [3: swapper/0: 1] pn547_probe : requesting IRQ 359 1863[ 1.956666] [3: swapper/0: 1] i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1f (ok) 1864[ 1.956926] [3: swapper/0: 1] pn547_probe : i2c addr=0x2B 1865[ 1.956965] [3: swapper/0: 1] pn547_probe : success 1866[ 1.957042] [3: swapper/0: 1] max77854_fuelgauge_init: 1867[ 1.957416] [3: swapper/0: 1] max77854_fuelgauge_probe: MAX77854 Fuelgauge Driver Loading 1868[ 1.957679] [3: swapper/0: 1] max77854_fuelgauge_parse_dt error reading capacity_max_hv -22 1869[ 1.957724] [3: swapper/0: 1] max77854_fuelgauge_parse_dt : LOW TEMP LIMIT(100) RECOVERY(120) 1870[ 1.957832] [3: swapper/0: 1] max77854_fuelgauge_parse_dt len: 4608, lenth: 1152, 96 1871[ 1.958011] [3: swapper/0: 1] max77854_fuelgauge_parse_dt thermal: 2, fg_irq: 0, capacity_max: 1000 1872[ 1.958011] [3: swapper/0: 1] qrtable20: 0x900, qrtable30 : 0x800 1873[ 1.958011] [3: swapper/0: 1] capacity_max_margin: 200, capacity_min: 0 1874[ 1.958011] [3: swapper/0: 1] calculation_type: 0x1c, fuel_alert_soc: 1, 1875[ 1.958011] [3: swapper/0: 1] repeated_fuelalert: 1 1876[ 1.958174] [3: swapper/0: 1] [max77854_fuelgauge_parse_dt][5947] 1877[ 1.961271] [3: swapper/0: 1] max77854_fg_init: jig_result : 0 1878[ 1.963063] [3: swapper/0: 1] power_supply max77854-fuelgauge: driver failed to report `status' property: -22 1879[ 1.965099] [3: swapper/0: 1] max77854_fg_read_temp: TEMPERATURE(26596), data(0x1a99) 1880[ 1.965155] [3: swapper/0: 1] [max77854_fuelgauge_probe]IRQ_BASE(389) FG_IRQ(416) 1881[ 1.965214] [3: kworker/3:2: 325] power_supply max77854-fuelgauge: driver failed to report `status' property: -22 1882[ 1.973891] [3: swapper/0: 1] [max77854_fg_alert_init] SALRT(0xff01), VALRT(0xffa3), CONFIG(0x0314) 1883[ 1.977323] [3: swapper/0: 1] max77854_fuelgauge_probe: MAX77854 Fuelgauge Driver Loaded 1884[ 1.977422] [3: swapper/0: 1] max77854_charger_init : 1885[ 1.977782] [3: swapper/0: 1] max77854_charger_probe: Max77854 Charger Driver Loading 1886[ 1.978021] [3: swapper/0: 1] max77854_charger_parse_dt: battery,chg_float_voltage is 43625 1887[ 1.978088] [3: swapper/0: 1] max77854_charger_initialize 1888[ 1.983913] [3: swapper/0: 1] max77854_set_float_voltage: battery cv voltage 0x99 1889[ 1.990840] [3: swapper/0: 1] max77854_charger_probe : device found : ver.0x2 1890[ 1.991917] [3: swapper/0: 1] max77854_get_charger_state : charger status (0x31) 1891[ 1.992705] [3: swapper/0: 1] max77854_check_battery : CHG_INT_OK(0xdd) 1892[ 1.993487] [3: swapper/0: 1] max77854_check_battery : CHG_DETAILS00(0x60) 1893[ 1.995569] [3: swapper/0: 1] max77854_get_charging_health: reg_data(0x3) 1894[ 1.995607] [3: swapper/0: 1] max77854_get_charging_health: Fail to get psy (battery) 1895[ 1.996393] [3: swapper/0: 1] max77854_get_vbus_state: Fail to get psy (battery) 1896[ 1.996430] [3: swapper/0: 1] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 1897[ 1.997958] [3: swapper/0: 1] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 1898[ 2.012134] [3: swapper/0: 1] MAX77854 : [0xb1]0xff, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4a, [0xba]0x38, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60, 1899[ 2.017490] [3: kworker/3:2: 325] max77854_get_charger_state : charger status (0x31) 1900[ 2.018278] [3: kworker/3:2: 325] max77854_check_battery : CHG_INT_OK(0xdd) 1901[ 2.019060] [3: kworker/3:2: 325] max77854_check_battery : CHG_DETAILS00(0x60) 1902[ 2.021902] [3: kworker/3:2: 325] max77854_get_charging_health: reg_data(0x3) 1903[ 2.021944] [3: kworker/3:2: 325] max77854_get_charging_health: Fail to get psy (battery) 1904[ 2.023388] [3: kworker/3:2: 325] max77854_get_vbus_state: Fail to get psy (battery) 1905[ 2.023427] [3: kworker/3:2: 325] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 1906[ 2.026210] [3: kworker/3:2: 325] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 1907[ 2.042109] [3: kworker/3:2: 325] MAX77854 : [0xb1]0xdf, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4a, [0xba]0x38, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x60, 1908[ 2.053662] [2: swapper/0: 1] max77854_charger_probe: MAX77854 Charger Driver Loaded 1909[ 2.053768] [2: swapper/0: 1] da9155_charger_init: 1910[ 2.053857] [2: swapper/0: 1] p9220_charger_init 1911[ 2.054132] [2: swapper/0: 1] p9220-charger 1-0061: p9220_charger_probe: p9220 Charger Driver Loading 1912[ 2.054217] [2: swapper/0: 1] p9220_chg_parse_dt wpc_det = 0x3f9, irq_wpc_det = 0x226 1913[ 2.054270] [2: swapper/0: 1] p9220_chg_parse_dt wpc_int = 0x7f, irq_wpc_int = 0x168 1914[ 2.054377] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 194 1915[ 2.054409] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 15 p9220_chg_parse_dt fod data = 133 1916[ 2.054454] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 48 p9220_chg_parse_dt fod data = 174 1917[ 2.054499] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 240 p9220_chg_parse_dt fod data = 150 1918[ 2.054544] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 17 p9220_chg_parse_dt fod data = 160 1919[ 2.054588] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 251 p9220_chg_parse_dt fod data = 158 1920[ 2.054632] [2: swapper/0: 1] p9220_chg_parse_dt fod data = 251 p9220_chg_parse_dt fod data_cv = 194 1921[ 2.054681] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 45 p9220_chg_parse_dt fod data_cv = 133 1922[ 2.054728] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 78 p9220_chg_parse_dt fod data_cv = 174 1923[ 2.054774] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 14 p9220_chg_parse_dt fod data_cv = 150 1924[ 2.054820] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 47 p9220_chg_parse_dt fod data_cv = 160 1925[ 2.054866] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 25 p9220_chg_parse_dt fod data_cv = 158 1926[ 2.054913] [2: swapper/0: 1] p9220_chg_parse_dt fod data_cv = 25 <6>[ 2.054950] [2: swapper/0: 1] p9220_charger_probe: p9220-charger 1927[ 2.055209] [2: swapper/0: 1] p9220_chg_get_property charger->pdata->cs100_status 0 1928[ 2.055253] [2: swapper/0: 1] p9220_chg_get_property wrong mode 1929[ 2.055285] [2: swapper/0: 1] p9220_chg_get_property cable_type =0 1930[ 2.055285] [2: swapper/0: 1] 1931[ 2.056215] [2: swapper/0: 1] p9220-charger 1-0061: p9220_reg_read: i2c read error, reg: 0x3e, ret: -6 1932[ 2.056259] [2: swapper/0: 1] p9220_get_vout: fail to read vout. (-1) 1933[ 2.056332] [2: kworker/2:0: 17] p9220_chg_get_property cable_type =0 1934[ 2.056332] [2: kworker/2:0: 17] 1935[ 2.056386] [2: kworker/2:0: 17] p9220_chg_get_property charger->pdata->cs100_status 0 1936[ 2.056425] [2: kworker/2:0: 17] p9220_chg_get_property wrong mode 1937[ 2.056459] [2: kworker/2:0: 17] p9220_chg_get_property cable_type =0 1938[ 2.056459] [2: kworker/2:0: 17] 1939[ 2.057379] [2: kworker/2:0: 17] p9220-charger 1-0061: p9220_reg_read: i2c read error, reg: 0x3e, ret: -6 1940[ 2.057423] [2: kworker/2:0: 17] p9220_get_vout: fail to read vout. (-1) 1941[ 2.151828] [3: kworker/u8:4: 321] sd 0:0:0:0: [sda] sd_revalidate_disk 1942[ 2.151950] [3: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1943[ 2.151996] [3: kworker/u8:4: 321] sd 0:0:0:0: [sda] 16384-byte physical blocks 1944[ 2.152263] [3: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: got buffers... 1945[ 2.152303] [3: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: lbpvpd1, lbpu1, lbpws0, lbpws100. 1946[ 2.152494] [3: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: got buffers... ret=0. 1947[ 2.152533] [3: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: buffer[3]=0x3c, max_xfer_length=0xffff. 1948[ 2.152579] [3: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1949[ 2.152761] [3: kworker/u8:4: 321] [TEST] sd_read_block_characteristics: sda: got buffers... rot=0x1. 1950[ 2.152805] [3: kworker/u8:4: 321] [TEST] sd_revalidate_disk:2890. sda: sdkp->device->sector_size=4096, provisioning_mode=1. 1951[ 2.153325] [3: kworker/u8:4: 321] [TEST] sd_read_write_same: sda: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1952[ 2.154248] [3: kworker/u8:4: 321] Alternate GPT is invalid, using primary GPT. 1953[ 2.154301] [3: kworker/u8:4: 321] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 1954[ 2.155685] [3: kworker/u8:4: 321] sd 0:0:0:0: [sda] sd_revalidate_disk 1955[ 2.155798] [3: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1956[ 2.155844] [3: kworker/u8:4: 321] sd 0:0:0:0: [sda] 16384-byte physical blocks 1957[ 2.156118] [3: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: got buffers... 1958[ 2.156158] [3: kworker/u8:4: 321] [TEST] sd_read_block_provisioning: sda: lbpvpd1, lbpu1, lbpws0, lbpws100. 1959[ 2.156345] [3: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: got buffers... ret=0. 1960[ 2.156385] [3: kworker/u8:4: 321] [TEST] sd_read_block_limits: sda: buffer[3]=0x3c, max_xfer_length=0xffff. 1961[ 2.156430] [3: kworker/u8:4: 321] [TEST] sd_config_discard: sda: mode=1. max_unmap_blocks=-1. 1962[ 2.156613] [3: kworker/u8:4: 321] [TEST] sd_read_block_characteristics: sda: got buffers... rot=0x1. 1963[ 2.156657] [3: kworker/u8:4: 321] [TEST] sd_revalidate_disk:2890. sda: sdkp->device->sector_size=4096, provisioning_mode=1. 1964[ 2.157187] [3: kworker/u8:4: 321] [TEST] sd_read_write_same: sda: provisioning_mode=1. sdkp->ws16=0, ws10=0. 1965[ 2.160428] [3: swapper/0: 1] p9220_charger_probe wc_w_state_irq = 1 1966[ 2.160463] [0: kworker/u8:2: 50] sd 0:0:0:1: [sdb] sd_revalidate_disk 1967[ 2.160533] [3: swapper/0: 1] p9220-charger 1-0061: p9220_charger_probe: p9220 Charger Driver Loaded 1968[ 2.160576] [1: kworker/u8:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk 1969[ 2.160613] [0: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 1970[ 2.160658] [1: kworker/u8:3: 51] sd 0:0:0:3: [sdd] sd_revalidate_disk 1971[ 2.160695] [0: kworker/u8:2: 50] sd 0:0:0:1: [sdb] 16384-byte physical blocks 1972[ 2.160735] [1: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 1973[ 2.160780] [1: kworker/u8:0: 6] sd 0:0:0:2: [sdc] 16384-byte physical blocks 1974[ 2.160840] [1: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 1975[ 2.160883] [3: swapper/0: 1] i2c-core: driver [p9220-charger] using legacy suspend method 1976[ 2.160925] [3: swapper/0: 1] i2c-core: driver [p9220-charger] using legacy resume method 1977[ 2.160973] [1: kworker/u8:3: 51] sd 0:0:0:3: [sdd] 16384-byte physical blocks 1978[ 2.161011] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: got buffers... 1979[ 2.161056] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: lbpvpd1, lbpu1, lbpws0, lbpws100. 1980[ 2.161206] [1: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: got buffers... 1981[ 2.161252] [1: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: lbpvpd1, lbpu1, lbpws0, lbpws100. 1982[ 2.161343] [1: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: got buffers... 1983[ 2.161384] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: got buffers... ret=0. 1984[ 2.161431] [1: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: lbpvpd1, lbpu1, lbpws0, lbpws100. 1985[ 2.161483] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: buffer[3]=0x3c, max_xfer_length=0xffff. 1986[ 2.161568] [0: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 1987[ 2.161610] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: got buffers... ret=0. 1988[ 2.161654] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: buffer[3]=0x3c, max_xfer_length=0xffff. 1989[ 2.161703] [1: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 1990[ 2.161784] [1: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: got buffers... ret=0. 1991[ 2.161845] [1: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: buffer[3]=0x3c, max_xfer_length=0xffff. 1992[ 2.161924] [0: kworker/u8:2: 50] [TEST] sd_read_block_characteristics: sdb: got buffers... rot=0x1. 1993[ 2.161976] [1: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 1994[ 2.162024] [0: kworker/u8:2: 50] [TEST] sd_revalidate_disk:2890. sdb: sdkp->device->sector_size=4096, provisioning_mode=1. 1995[ 2.162077] [1: kworker/u8:0: 6] [TEST] sd_read_block_characteristics: sdc: got buffers... rot=0x1. 1996[ 2.162125] [3: swapper/0: 1] max86900_probe - start 1997[ 2.162157] [1: kworker/u8:0: 6] [TEST] sd_revalidate_disk:2890. sdc: sdkp->device->sector_size=4096, provisioning_mode=1. 1998[ 2.162211] [3: swapper/0: 1] max86900_parse_dt - get vdd_1p8 error 1999[ 2.162245] [3: swapper/0: 1] max86900_parse_dt - get led_3p3 error 2000[ 2.162435] [3: swapper/0: 1] max86900_regulator_onoff - onoff = 1 2001[ 2.162685] [1: kworker/u8:3: 51] [TEST] sd_read_block_characteristics: sdd: got buffers... rot=0x1. 2002[ 2.162734] [1: kworker/u8:3: 51] [TEST] sd_revalidate_disk:2890. sdd: sdkp->device->sector_size=4096, provisioning_mode=1. 2003[ 2.163052] [1: kworker/u8:0: 6] [TEST] sd_read_write_same: sdc: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2004[ 2.163101] [0: kworker/u8:2: 50] [TEST] sd_read_write_same: sdb: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2005[ 2.163552] [1: kworker/u8:3: 51] [TEST] sd_read_write_same: sdd: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2006[ 2.164152] [1: kworker/u8:0: 6] Alternate GPT is invalid, using primary GPT. 2007[ 2.164189] [0: kworker/u8:2: 50] Alternate GPT is invalid, using primary GPT. 2008[ 2.164236] [1: kworker/u8:0: 6] sdc: sdc1 2009[ 2.164276] [0: kworker/u8:2: 50] sdb: sdb1 2010[ 2.164744] [1: kworker/u8:0: 6] sd 0:0:0:2: [sdc] sd_revalidate_disk 2011[ 2.164781] [0: kworker/u8:2: 50] sd 0:0:0:1: [sdb] sd_revalidate_disk 2012[ 2.164894] [1: kworker/u8:3: 51] Alternate GPT is invalid, using primary GPT. 2013[ 2.164933] [0: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 2014[ 2.164976] [1: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 2015[ 2.165025] [1: kworker/u8:0: 6] sd 0:0:0:2: [sdc] 16384-byte physical blocks 2016[ 2.165070] [0: kworker/u8:2: 50] sd 0:0:0:1: [sdb] 16384-byte physical blocks 2017[ 2.165130] [1: kworker/u8:3: 51] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15 sdd16 sdd17 sdd18 sdd19 sdd20 sdd21 2018[ 2.165343] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: got buffers... 2019[ 2.165396] [0: kworker/u8:2: 50] [TEST] sd_read_block_provisioning: sdb: lbpvpd1, lbpu1, lbpws0, lbpws100. 2020[ 2.165499] [1: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: got buffers... 2021[ 2.165545] [1: kworker/u8:0: 6] [TEST] sd_read_block_provisioning: sdc: lbpvpd1, lbpu1, lbpws0, lbpws100. 2022[ 2.165626] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: got buffers... ret=0. 2023[ 2.165713] [0: kworker/u8:2: 50] [TEST] sd_read_block_limits: sdb: buffer[3]=0x3c, max_xfer_length=0xffff. 2024[ 2.165768] [0: kworker/u8:2: 50] [TEST] sd_config_discard: sdb: mode=1. max_unmap_blocks=-1. 2025[ 2.165962] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: got buffers... ret=0. 2026[ 2.166007] [0: kworker/u8:2: 50] [TEST] sd_read_block_characteristics: sdb: got buffers... rot=0x1. 2027[ 2.166058] [1: kworker/u8:0: 6] [TEST] sd_read_block_limits: sdc: buffer[3]=0x3c, max_xfer_length=0xffff. 2028[ 2.166107] [1: kworker/u8:0: 6] [TEST] sd_config_discard: sdc: mode=1. max_unmap_blocks=-1. 2029[ 2.166153] [0: kworker/u8:2: 50] [TEST] sd_revalidate_disk:2890. sdb: sdkp->device->sector_size=4096, provisioning_mode=1. 2030[ 2.166204] [3: swapper/0: 1] input: hrm_sensor as /devices/virtual/input/input4 2031[ 2.166330] [3: swapper/0: 1] ------------[ cut here ]------------ 2032[ 2.166370] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:551 device_create_file+0x98/0xa8() 2033[ 2.166440] [1: kworker/u8:0: 6] [TEST] sd_read_block_characteristics: sdc: got buffers... rot=0x1. 2034[ 2.166489] [3: swapper/0: 1] Attribute thres1: read permission without 'show' 2035[ 2.166528] [3: swapper/0: 1] Modules linked in: 2036[ 2.166557] [1: kworker/u8:0: 6] [TEST] sd_revalidate_disk:2890. sdc: sdkp->device->sector_size=4096, provisioning_mode=1. 2037[ 2.166613] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 2038[ 2.166658] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 2039[ 2.166696] [3: swapper/0: 1] Call trace: 2040[ 2.166725] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 2041[ 2.166761] [0: kworker/u8:2: 50] [TEST] sd_read_write_same: sdb: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2042[ 2.166814] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 2043[ 2.166852] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 2044[ 2.166890] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 2045[ 2.166929] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 2046[ 2.166969] [3: swapper/0: 1] [<ffffffc0005d1c98>] device_create_file+0x94/0xa8 2047[ 2.167009] [3: swapper/0: 1] [<ffffffc000abdfa8>] sensors_register+0xac/0xfc 2048[ 2.167049] [3: swapper/0: 1] [<ffffffc000ac381c>] max86900_probe+0x640/0xb90 2049[ 2.167089] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 2050[ 2.167127] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 2051[ 2.167167] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 2052[ 2.167204] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 2053[ 2.167240] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 2054[ 2.167277] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 2055[ 2.167314] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 2056[ 2.167351] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 2057[ 2.167392] [3: swapper/0: 1] [<ffffffc0014c2c88>] max86900_init+0x14/0x20 2058[ 2.167429] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 2059[ 2.167469] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 2060[ 2.167508] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 2061[ 2.167543] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdcec ]--- 2062[ 2.167577] [3: swapper/0: 1] ------------[ cut here ]------------ 2063[ 2.167612] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:551 device_create_file+0x98/0xa8() 2064[ 2.167681] [3: swapper/0: 1] Attribute thres2: read permission without 'show' 2065[ 2.167723] [1: kworker/u8:3: 51] Modules linked in: 2066[ 2.167750] [1: kworker/u8:3: 51] sd 0:0:0:3: [sdd] sd_revalidate_disk 2067[ 2.167785] [3: swapper/0: 1] 2068[ 2.167804] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 2069[ 2.167850] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 2070[ 2.167887] [1: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 2071[ 2.167930] [3: swapper/0: 1] Call trace: 2072[ 2.167955] [1: kworker/u8:3: 51] sd 0:0:0:3: [sdd] 16384-byte physical blocks 2073[ 2.167992] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 2074[ 2.168028] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 2075[ 2.168063] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 2076[ 2.168098] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 2077[ 2.168136] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 2078[ 2.168173] [3: swapper/0: 1] [<ffffffc0005d1c98>] device_create_file+0x94/0xa8 2079[ 2.168212] [1: kworker/u8:0: 6] [TEST] sd_read_write_same: sdc: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2080[ 2.168263] [3: swapper/0: 1] [<ffffffc000abdfa8>] sensors_register+0xac/0xfc 2081[ 2.168301] [1: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: got buffers... 2082[ 2.168342] [3: swapper/0: 1] [<ffffffc000ac381c>] max86900_probe+0x640/0xb90 2083[ 2.168378] [1: kworker/u8:3: 51] [TEST] sd_read_block_provisioning: sdd: lbpvpd1, lbpu1, lbpws0, lbpws100. 2084[ 2.168425] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 2085[ 2.168461] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 2086[ 2.168499] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 2087[ 2.168536] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 2088[ 2.168571] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 2089[ 2.168607] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 2090[ 2.168644] [1: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: got buffers... ret=0. 2091[ 2.168684] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 2092[ 2.168721] [1: kworker/u8:3: 51] [TEST] sd_read_block_limits: sdd: buffer[3]=0x3c, max_xfer_length=0xffff. 2093[ 2.168766] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 2094[ 2.168804] [1: kworker/u8:3: 51] [TEST] sd_config_discard: sdd: mode=1. max_unmap_blocks=-1. 2095[ 2.168845] [3: swapper/0: 1] [<ffffffc0014c2c88>] max86900_init+0x14/0x20 2096[ 2.168881] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 2097[ 2.168918] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 2098[ 2.168957] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 2099[ 2.168991] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdced ]--- 2100[ 2.169025] [1: kworker/u8:3: 51] [TEST] sd_read_block_characteristics: sdd: got buffers... rot=0x1. 2101[ 2.169068] [3: swapper/0: 1] ------------[ cut here ]------------ 2102[ 2.169102] [1: kworker/u8:3: 51] [TEST] sd_revalidate_disk:2890. sdd: sdkp->device->sector_size=4096, provisioning_mode=1. 2103[ 2.169155] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:551 device_create_file+0x98/0xa8() 2104[ 2.169223] [3: swapper/0: 1] Attribute thres3: read permission without 'show' 2105[ 2.169262] [3: swapper/0: 1] Modules linked in: 2106[ 2.169289] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 2107[ 2.169334] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 2108[ 2.169371] [3: swapper/0: 1] Call trace: 2109[ 2.169397] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 2110[ 2.169433] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 2111[ 2.169468] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 2112[ 2.169503] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 2113[ 2.169542] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 2114[ 2.169580] [3: swapper/0: 1] [<ffffffc0005d1c98>] device_create_file+0x94/0xa8 2115[ 2.169617] [3: swapper/0: 1] [<ffffffc000abdfa8>] sensors_register+0xac/0xfc 2116[ 2.169654] [3: swapper/0: 1] [<ffffffc000ac381c>] max86900_probe+0x640/0xb90 2117[ 2.169690] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 2118[ 2.169727] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 2119[ 2.169762] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 2120[ 2.169799] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 2121[ 2.169836] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 2122[ 2.169870] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 2123[ 2.169906] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 2124[ 2.169943] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 2125[ 2.169980] [3: swapper/0: 1] [<ffffffc0014c2c88>] max86900_init+0x14/0x20 2126[ 2.170016] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 2127[ 2.170090] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 2128[ 2.170129] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 2129[ 2.170205] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdcee ]--- 2130[ 2.170241] [3: swapper/0: 1] ------------[ cut here ]------------ 2131[ 2.170290] [3: kworker/3:1: 33] sec_ts 9-0048: get_tsp_nvm_data: data:3 2132[ 2.170325] [1: kworker/u8:3: 51] [TEST] sd_read_write_same: sdd: provisioning_mode=1. sdkp->ws16=0, ws10=0. 2133[ 2.170406] [3: swapper/0: 1] WARNING: CPU: 3 PID: 1 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/drivers/base/core.c:551 device_create_file+0x98/0xa8() 2134[ 2.170493] [3: kworker/3:1: 33] sec_ts 9-0048: sec_ts_read_nv_work: fac_nv:89, cal_nv:03 2135[ 2.170539] [3: swapper/0: 1] Attribute thres4: read permission without 'show' 2136[ 2.170575] [3: swapper/0: 1] Modules linked in: 2137[ 2.170603] [3: swapper/0: 1] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.20-8575098 #1 2138[ 2.170647] [3: swapper/0: 1] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 2139[ 2.170684] [3: swapper/0: 1] Call trace: 2140[ 2.170709] [3: swapper/0: 1] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 2141[ 2.170744] [3: swapper/0: 1] [<ffffffc000110998>] show_stack+0x10/0x1c 2142[ 2.170778] [3: swapper/0: 1] [<ffffffc000d76668>] dump_stack+0x80/0xc4 2143[ 2.170813] [3: swapper/0: 1] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 2144[ 2.170851] [3: swapper/0: 1] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 2145[ 2.170888] [3: swapper/0: 1] [<ffffffc0005d1c98>] device_create_file+0x94/0xa8 2146[ 2.170924] [3: swapper/0: 1] [<ffffffc000abdfa8>] sensors_register+0xac/0xfc 2147[ 2.170961] [3: swapper/0: 1] [<ffffffc000ac381c>] max86900_probe+0x640/0xb90 2148[ 2.170997] [3: swapper/0: 1] [<ffffffc0008109e4>] i2c_device_probe+0xb4/0xec 2149[ 2.171033] [3: swapper/0: 1] [<ffffffc0005d5d48>] driver_probe_device+0xd4/0x238 2150[ 2.171070] [3: swapper/0: 1] [<ffffffc0005d5f58>] __driver_attach+0x60/0x90 2151[ 2.171105] [3: swapper/0: 1] [<ffffffc0005d4e90>] bus_for_each_dev+0x74/0x94 2152[ 2.171140] [3: swapper/0: 1] [<ffffffc0005d5818>] driver_attach+0x1c/0x28 2153[ 2.171175] [3: swapper/0: 1] [<ffffffc0005d54e4>] bus_add_driver+0xf8/0x1cc 2154[ 2.171211] [3: swapper/0: 1] [<ffffffc0005d6834>] driver_register+0x94/0xe4 2155[ 2.171246] [3: swapper/0: 1] [<ffffffc00080fe98>] i2c_register_driver+0x48/0xac 2156[ 2.171284] [3: swapper/0: 1] [<ffffffc0014c2c88>] max86900_init+0x14/0x20 2157[ 2.171318] [3: swapper/0: 1] [<ffffffc000109ae8>] do_one_initcall+0x188/0x1a8 2158[ 2.171355] [3: swapper/0: 1] [<ffffffc001476bb4>] kernel_init_freeable+0x144/0x1e4 2159[ 2.171393] [3: swapper/0: 1] [<ffffffc000d70258>] kernel_init+0x10/0xd0 2160[ 2.171426] [3: swapper/0: 1] ---[ end trace a24c810b3f7fdcef ]--- 2161[ 2.171571] [3: swapper/0: 1] input: hrmled_sensor as /devices/virtual/input/input5 2162[ 2.171770] [3: swapper/0: 1] input: uv_sensor as /devices/virtual/input/input6 2163[ 2.172602] [3: swapper/0: 1] max86900_init_device done, part_type = 12 2164[ 2.172720] [3: swapper/0: 1] max86900_regulator_onoff - onoff = 0 2165[ 2.172835] [3: swapper/0: 1] max86900_probe success 2166[ 2.173266] [3: swapper/0: 1] [VIB] of_max77854_haptic_dt: mode: 1 2167[ 2.173300] [3: swapper/0: 1] [VIB] of_max77854_haptic_dt: divisor: 128 2168[ 2.173334] [3: swapper/0: 1] [VIB] ++ max77854_haptic_probe 2169[ 2.177305] [3: swapper/0: 1] [VIB] -- max77854_haptic_probe 2170[ 2.178075] [3: swapper/0: 1] [VIB]: ss_vibrator_probe 2171[ 2.178125] [3: swapper/0: 1] vibrator_parse_dt:286, en gpio not specified 2172[ 2.178672] [3: swapper/0: 1] Trustonic TEE: mobicore_init: MobiCore mcDrvModuleApi version is 2.1 2173[ 2.179029] [3: swapper/0: 1] Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310A-V006-20151210_094535_2333 2174[ 2.179619] [3: swapper/0: 1] vfsspi_init vfsspi_init 2175[ 2.179920] [3: swapper/0: 1] vfsspi_probe 2176[ 2.179960] [3: swapper/0: 1] vfsspi_parse_dt: sleepPin=999 2177[ 2.180002] [3: swapper/0: 1] vfsspi_parse_dt: drdyPin=131 2178[ 2.180066] [3: swapper/0: 1] vfsspi_parse_dt: not set ocp_en in dts 2179[ 2.180107] [3: swapper/0: 1] vfsspi_parse_dt: ldo_pin=1004 2180[ 2.180137] [3: swapper/0: 1] vfsspi_parse_dt: not set ldo2 in dts 2181[ 2.180178] [3: swapper/0: 1] vfsspi_parse_dt: vendorPin=1015 2182[ 2.180210] [3: swapper/0: 1] vfsspi_parse_dt: ldocontrol=1, min_cpufreq_limit=1700000 2183[ 2.180253] [3: swapper/0: 1] vfsspi_parse_dt: orient=0 2184[ 2.180283] [3: swapper/0: 1] vfsspi_platformInit 2185[ 2.180431] [3: swapper/0: 1] vfsspi_platformInit : platformInit success! 2186[ 2.180466] [3: swapper/0: 1] vfsspi_vendor_check 2187[ 2.180506] [3: swapper/0: 1] vfsspi_regulator_onoff: on ocp_en: disable 2188[ 2.200078] [3: swapper/0: 1] vfsspi_vendor_check is success, vendorPin (1015), value (0) 2189[ 2.200137] [3: swapper/0: 1] vfsspi_regulator_onoff: off ocp_en: disable 2190[ 2.200380] [3: swapper/0: 1] vfsspi_probe successful 2191[ 2.200427] [3: swapper/0: 1] vfsspi_init init is successful 2192[ 2.200464] [3: swapper/0: 1] etspi_init 2193[ 2.200487] [3: swapper/0: 1] etspi_init FP_CHECK value (1) 2194[ 2.200517] [3: swapper/0: 1] etspi_init It is not egis sensor 2195[ 2.201312] [3: swapper/0: 1] [FACTORY] factory_adsp_init 2196[ 2.201364] [3: swapper/0: 1] [FACTORY] factory_adsp_init: Timer Init 2197[ 2.201436] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560d000 2198[ 2.201474] [3: swapper/0: 1] [FACTORY] core_factory_init 2199[ 2.201551] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560d400 2200[ 2.201589] [3: swapper/0: 1] [FACTORY] k6ds3_accel_factory_init 2201[ 2.201653] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560d800 2202[ 2.201691] [3: swapper/0: 1] [FACTORY] k6ds3_gyro_factory_init 2203[ 2.201771] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560dc00 2204[ 2.201809] [3: swapper/0: 1] [FACTORY] ak09911c_factory_init 2205[ 2.201872] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560e000 2206[ 2.201910] [3: swapper/0: 1] [FACTORY] bmp280_pressure_factory_init 2207[ 2.201982] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560e400 2208[ 2.202019] [3: swapper/0: 1] [FACTORY] tmd490x_light_factory_init 2209[ 2.202090] [3: swapper/0: 1] [FACTORY] adsp_factory_register ptr:ffffffc0f560e800 2210[ 2.202128] [3: swapper/0: 1] [FACTORY] tmd490x_prox_factory_init 2211[ 2.202198] [3: swapper/0: 1] [FACTORY] initialize_mobeam 2212[ 2.202340] [3: swapper/0: 1] usbcore: registered new interface driver snd-usb-audio 2213[ 2.203699] [3: swapper/0: 1] [MAX98506_DEBUG] max98506_i2c_probe: enter, device 'max98506' 2214[ 2.203978] [3: swapper/0: 1] [MAX98506_DEBUG] max98506_regulator_config: min_uv:1800000 max_uv:1800000 load_ua:300000 2215[ 2.204035] [3: swapper/0: 1] max98506 18-0031: There is no log_class property. 2216[ 2.204074] [3: swapper/0: 1] max98506 18-0031: Sub-device register was not found. 2217[ 2.204112] [3: swapper/0: 1] max98506 18-0031: There is no interleave information. 2218[ 2.204210] [3: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=35, platform_type=0 2219[ 2.204254] [3: swapper/0: 1] [MAXIM_DSM] maxdsm_update_param_info: version=41, platform_type=1 2220[ 2.204872] [3: swapper/0: 1] [MAX98506_DEBUG] max98506_i2c_probe: exit, device 'max98506' 2221[ 2.205468] [3: swapper/0: 1] [MAXIM_DSM_CAL] maxdsm_cal_init: g_class=ffffffc0f55f4f00 ffffffc0f55f4f00 2222[ 2.205514] [3: swapper/0: 1] [MAXIM_DSM_CAL] maxdsm_cal_init: Completed initialization 2223[ 2.205656] [3: swapper/0: 1] [MAXIM_DSM_POWER] maxdsm_power_init: class=ffffffc0f55f4f00 ffffffc0f55f4f00 2224[ 2.205702] [3: swapper/0: 1] [MAXIM_DSM_POWER] maxdsm_power_init: Completed initialization 2225[ 2.208380] [3: swapper/0: 1] dbmdx-codec soc:dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.015 2226[ 2.208672] [3: swapper/0: 1] dbmdx-codec soc:dbmdx: dbmdx_platform_probe: spi interface node ffffffc07655c400 2227[ 2.208729] [3: swapper/0: 1] platform soc:dbmdx: Driver dbmdx-codec requests probe deferral 2228[ 2.209030] [3: swapper/0: 1] dbmd4-spi spi0.0: spi_common_probe: spi speed is 4800000 2229[ 2.209072] [3: swapper/0: 1] dbmd4-spi spi0.0: spi_common_probe: Setting spi read chunk to 8192 bytes 2230[ 2.209118] [3: swapper/0: 1] dbmd4-spi spi0.0: spi_common_probe: Setting spi write chunk to 131072 bytes 2231[ 2.209165] [3: swapper/0: 1] dbmd4-spi spi0.0: spi_common_probe: Setting Min DMA Cmd Size to default: 0 bytes 2232[ 2.209213] [3: swapper/0: 1] dbmd4-spi spi0.0: spi_common_probe: successfully probed 2233[ 2.210051] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=0 2234[ 2.210103] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=1 2235[ 2.210138] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=2 2236[ 2.210174] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=3 2237[ 2.210209] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=4 2238[ 2.210244] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=5 2239[ 2.210279] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=6 2240[ 2.210315] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=7 2241[ 2.210350] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=8 2242[ 2.210385] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=9 2243[ 2.210420] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=10 2244[ 2.210456] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=11 2245[ 2.210492] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=12 2246[ 2.210527] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=13 2247[ 2.210562] I[3: swapper/0: 1] [FACTORY] factory_adsp_command_timer: value=14 2248[ 2.210620] [3: kworker/3:1: 33] [FACTORY] stop_raw_data_worker: flag=7fff 2249[ 2.211815] [3: swapper/0: 1] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2250[ 2.212064] [3: swapper/0: 1] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2251[ 2.212129] [3: swapper/0: 1] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2252[ 2.212756] [3: swapper/0: 1] dbmdx_pcm_platform_probe 2253[ 2.223233] [3: swapper/0: 1] msm-compr-dsp soc:qcom,msm-compr-dsp: msm_compr_probe: dev name soc:qcom,msm-compr-dsp 2254[ 2.224769] [3: swapper/0: 1] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2255[ 2.225319] [3: swapper/0: 1] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2256[ 2.231580] [3: swapper/0: 1] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2257[ 2.231678] [3: swapper/0: 1] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2258[ 2.232166] [3: swapper/0: 1] GACT probability NOT on 2259[ 2.232202] [3: swapper/0: 1] Mirror/redirect action on 2260[ 2.232243] [3: swapper/0: 1] u32 classifier 2261[ 2.232268] [3: swapper/0: 1] Actions configured 2262[ 2.232309] [3: swapper/0: 1] Netfilter messages via NETLINK v0.30. 2263[ 2.232374] [3: swapper/0: 1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 2264[ 2.232580] [3: swapper/0: 1] ctnetlink v0.93: registering with nfnetlink. 2265[ 2.232915] [3: swapper/0: 1] xt_time: kernel timezone is -0000 2266[ 2.232965] [3: swapper/0: 1] 939-23012-001-quicksec-vpnclient-for-android-3.5-4155-1a877303f36b-4155 2267[ 2.233009] [3: swapper/0: 1] vpnclient kernel spd loaded. 2268[ 2.233183] [3: swapper/0: 1] ip_tables: (C) 2000-2006 Netfilter Core Team 2269[ 2.233317] [3: swapper/0: 1] arp_tables: (C) 2002 David S. Miller 2270[ 2.233374] [3: swapper/0: 1] TCP: bic registered 2271[ 2.233404] [3: swapper/0: 1] TCP: cubic registered 2272[ 2.233435] [3: swapper/0: 1] Initializing XFRM netlink socket 2273[ 2.233687] [3: swapper/0: 1] NET: Registered protocol family 10 2274[ 2.234326] [3: swapper/0: 1] mip6: Mobile IPv6 2275[ 2.234367] [3: swapper/0: 1] ip6_tables: (C) 2000-2006 Netfilter Core Team 2276[ 2.234478] [3: swapper/0: 1] sit: IPv6 over IPv4 tunneling driver 2277[ 2.234745] [3: swapper/0: 1] NET: Registered protocol family 17 2278[ 2.234787] [3: swapper/0: 1] NET: Registered protocol family 15 2279[ 2.234843] [3: swapper/0: 1] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 2280[ 2.234916] [3: swapper/0: 1] Ebtables v2.0 registered 2281[ 2.235014] [3: swapper/0: 1] l2tp_core: L2TP core driver, V2.0 2282[ 2.235052] [3: swapper/0: 1] l2tp_ppp: PPPoL2TP kernel driver, V2.0 2283[ 2.235087] [3: swapper/0: 1] l2tp_ip: L2TP IP encapsulation support (L2TPv3) 2284[ 2.235134] [3: swapper/0: 1] l2tp_netlink: L2TP netlink interface 2285[ 2.235179] [3: swapper/0: 1] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) 2286[ 2.235235] [3: swapper/0: 1] l2tp_debugfs: L2TP debugfs support 2287[ 2.235268] [3: swapper/0: 1] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) 2288[ 2.236135] [3: swapper/0: 1] NET: Registered protocol family 27 2289[ 2.239695] [1: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2290[ 2.245478] [1: kworker/u8:3: 51] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on 2291[ 2.246897] [1: kworker/u8:3: 51] sec-thermistor soc:sec_thermistor: sec-ap-thermistor successfully probed. 2292[ 2.247488] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_platform_probe: DBMDX codec driver version = 4.015 2293[ 2.247954] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_platform_probe: spi interface node ffffffc07655c400 2294[ 2.248016] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using device-tree VA firmware name: dbmd4_va_fw.bin 2295[ 2.248077] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using default VQE firmware name: dbmd2_vqe_fw.bin 2296[ 2.248136] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using default VQE non-overlay firmware name: dbmd2_vqe_fw.bin 2297[ 2.248197] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA feature activated 2298[ 2.248249] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using 6 VA configuration values from device-tree 2299[ 2.248306] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000000: 0x80290020 2300[ 2.248356] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000001: 0x802210e0 2301[ 2.248405] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000002: 0x80158e8e 2302[ 2.248455] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000003: 0x801b0020 2303[ 2.248504] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000004: 0x80230021 2304[ 2.248554] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA cfg 00000005: 0x80103015 2305[ 2.248605] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using 3 VA speed configuration values from device-tree 2306[ 2.248665] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000000: 0x00000000 460800 0 960000 2307[ 2.248722] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000001: 0x00000000 2000000 0 4800000 2308[ 2.248781] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA speed cfg 00000002: 0x00000000 3000000 0 4800000 2309[ 2.248842] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VQE TDM bypass config: 0x00000000 2310[ 2.248895] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using 3 VA mic configuration values from device-tree 2311[ 2.248954] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA mic cfg 00000000: 0x0000f041 2312[ 2.249004] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA mic cfg 00000001: 0x00001044 2313[ 2.249055] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA mic cfg 00000002: 0x00000008 2314[ 2.249106] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: VA default mic config: 0x00000000 2315[ 2.249159] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: no va_backlog_length definition in device-tree 2316[ 2.249216] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: using master-clk-rate of 32768HZ from device-tree 2317[ 2.249275] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: no master-clk definition in device-tree 2318[ 2.249328] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: no constant-clk-rate definition in device-tree 2319[ 2.249385] [1: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_get_devtree_pdata: no constant-clk definition in device-tree 2320[ 2.249463] [1: kworker/u8:3: 51] soc:dbmdx supply dbmdx_regulator not found, using dummy regulator 2321[ 2.250389] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: missing or invalid d2 strap1 gpio: -2 2322[ 2.250498] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: using use_gpio_for_wakeup of 1 from device-tree 2323[ 2.250551] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: no send_wakeup_seq definition in device-tree 2324[ 2.250603] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: using wakeup_set_value of 0 from device-tree 2325[ 2.250655] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: using firmware_id of 0x dbd4 from device-tree 2326[ 2.250710] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: using min_samples_chunk_size of 0 2327[ 2.250757] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: no va buffering pcm rate, setting to 16000 2328[ 2.251209] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_common_probe: registered DBMDX codec driver version = 4.015 2329[ 2.251259] [2:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_request_and_load_fw VA/- 2330[ 2.251299] [2:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: would move BOOTING -> BOOTING (00 -> 00) 2331[ 2.251350] [2:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: has moved BOOTING -> BOOTING (00 -> 00) 2332[ 2.251398] [2:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_request_and_load_fw: request VA firmware - dbmd4_va_fw.bin 2333[ 2.251451] [3: kworker/u8:3: 51] dbmdx-codec soc:dbmdx: dbmdx_platform_probe: successfully probed 2334[ 2.251748] [3: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2335[ 2.252004] [3: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2336[ 2.252069] [3: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2337[ 2.252330] [3: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2338[ 2.252503] [3: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2339[ 2.253861] [3: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2340[ 2.253959] [3: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2341[ 2.254098] [3: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2342[ 2.254300] [2: swapper/0: 1] sec_multi_charger_init: 2343[ 2.256001] [2: swapper/0: 1] zswap: loading zswap 2344[ 2.256035] [2: swapper/0: 1] zpool: creating pool type zsmalloc 2345[ 2.256166] [2: swapper/0: 1] zpool: created zsmalloc pool 2346[ 2.256200] [2: swapper/0: 1] zswap: using zsmalloc pool 2347[ 2.256246] [2: swapper/0: 1] zswap: using lzo compressor 2348[ 2.266566] [0: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2349[ 2.266991] [0: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2350[ 2.267067] [0: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2351[ 2.267479] [0: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2352[ 2.267748] [0: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2353[ 2.269681] [0: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2354[ 2.269799] [0: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2355[ 2.270012] [0: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2356[ 2.271215] [0: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2357[ 2.271682] [0: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2358[ 2.271768] [0: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2359[ 2.271874] [0: kworker/u8:3: 51] RNDIS_IPA module is loaded. 2360[ 2.272238] [0: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2361[ 2.272341] [3: swapper/0: 1] usb: dwc3_gadget_pullup is_on: 0 2362[ 2.272410] [3: swapper/0: 1] file system registered 2363[ 2.272476] [3: swapper/0: 1] mbim_init: initialize 1 instances 2364[ 2.272513] [0: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2365[ 2.272610] [3: swapper/0: 1] mbim_init: Initialized 1 ports 2366[ 2.273389] [3: swapper/0: 1] [mtp_setup] line = [1794] 2367[ 2.273538] [3: swapper/0: 1] mtp: mtp_setup success to create guid attr 2368[ 2.273663] [3: swapper/0: 1] rndis_qc_init: initialize rndis QC instance 2369[ 2.273848] [3: swapper/0: 1] gether_setup_name_default: using random self ethernet address 2370[ 2.273896] [3: swapper/0: 1] gether_setup_name_default: using random host ethernet address 2371[ 2.273971] [3: swapper/0: 1] Number of LUNs=8 2372[ 2.274001] [3: swapper/0: 1] Mass Storage Function, version: 2009/09/11 2373[ 2.274043] [3: swapper/0: 1] LUN: removable file: (no medium) 2374[ 2.274083] [3: swapper/0: 1] Number of LUNs=1 2375[ 2.274138] [3: swapper/0: 1] LUN: removable CD-ROM file: (no medium) 2376[ 2.274173] [3: swapper/0: 1] Number of LUNs=1 2377[ 2.274295] [3: swapper/0: 1] conn_gadget_function_init(#) call conn_gadget_setup 2378[ 2.274334] [3: swapper/0: 1] conn_gadget_setup 2379[ 2.274497] [3: swapper/0: 1] android_usb gadget: android_usb ready 2380[ 2.274534] [1: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2381[ 2.274652] [1: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2382[ 2.274920] [1: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2383[ 2.275405] [1: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2384[ 2.275787] [1: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2385[ 2.275868] [1: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2386[ 2.276124] [3: swapper/0: 1] usb_notifier: notifier_probe 2387[ 2.276161] [3: swapper/0: 1] usb_notifier: There is not USB 3.0 redriver pin 2388[ 2.276199] [3: swapper/0: 1] usb_notifier: of_get_usb_redriver_dt: usb30_redriver_en: Invalied gpio pins 2389[ 2.276245] [3: swapper/0: 1] usb_notifier: redriver_en : -2 2390[ 2.276276] [3: swapper/0: 1] usb_notifier: disable_control_en : 1 2391[ 2.276308] [1: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2392[ 2.276360] [3: swapper/0: 1] usb_notify: registered otg_notify + 2393[ 2.276469] [3: swapper/0: 1] usb_notify: registered otg_notify - 2394[ 2.276503] [3: swapper/0: 1] muic_notifier_register: listener=2 register 2395[ 2.276538] [3: swapper/0: 1] usb_notifier: usb_handle_notification action=1, attached_dev=1 2396[ 2.276578] [1: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2397[ 2.276632] [3: swapper/0: 1] usb_notify: send_otg_notify event=vbus(1) enable=1 2398[ 2.276670] [3: swapper/0: 1] usb_notify: otg_notifier_callback event=vbus(1) 2399[ 2.276726] [3: swapper/0: 1] vbus_notifier_register: listener=2 register 2400[ 2.276763] [1: kworker/u8:7: 324] usb_notify: otg_notify_state+ event=vbus(1), enable=on 2401[ 2.276814] [3: swapper/0: 1] usb_notifier: vbus_handle_notification cmd=0, vbus_type=LOW 2402[ 2.276864] [3: swapper/0: 1] usb_notifier: usb: dwc-usb power_supply_set_present(1) 2403[ 2.276903] [3: swapper/0: 1] usb_notifier soc:usb-notifier: usb notifier probe 2404[ 2.276943] [1: kworker/u8:7: 324] usb_notify: otg_notify_state- event=vbus, cable=vbus 2405[ 2.278797] [3: swapper/0: 1] gpio-keys soc:gpio_keys: [Hall_IC] device tree was founded 2406[ 2.279001] [1: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2407[ 2.279118] [1: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2408[ 2.279208] [3: swapper/0: 1] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input7 2409[ 2.279254] [3: swapper/0: 1] [HALL_IC] : gpio_keys_open 2410[ 2.279335] [1: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2411[ 2.279480] [3: swapper/0: 1] sec_debug_check_crash_key code 115 value 0 state 0 enable 0 2412[ 2.279531] [3: swapper/0: 1] [sec_input] gpio_keys_gpio_report_event: 115, 0, 0 2413[ 2.279604] [3: swapper/0: 1] sec_debug_check_crash_key code 172 value 0 state 0 enable 0 2414[ 2.279646] [3: swapper/0: 1] [sec_input] gpio_keys_gpio_report_event: 172, 0, 0 2415[ 2.279762] [1: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2416[ 2.280199] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2417[ 2.280272] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2418[ 2.280318] [3: swapper/0: 1] certify_hall_init start 2419[ 2.280663] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2420[ 2.280896] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2421[ 2.281250] [0: swapper/0: 1] init_certify_hall_ic_irq : success 2422[ 2.281413] [0: swapper/0: 1] input: certify_hall as /devices/soc/soc:certify_hall/input/input8 2423[ 2.282391] [0: swapper/0: 1] qcom,qpnp-rtc qpnp-rtc-ffffffc0f7d3c000: setting system clock to 2016-01-06 02:39:40 UTC (1452047980) 2424[ 2.282457] [0: swapper/0: 1] [syscamera][msm_companion_init_module::3047]init companion module 2425[ 2.282520] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2426[ 2.282613] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2427[ 2.282808] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2428[ 2.283254] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2429[ 2.283444] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2430[ 2.283509] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2431[ 2.283557] [0: swapper/0: 1] [syscamera][msm_companion_probe::2920][E] 2432[ 2.283598] [0: swapper/0: 1] [syscamera][msm_companion_probe::2974] i2c_func_tbl=cci 2433[ 2.283737] [0: swapper/0: 1] [syscamera][msm_companion_probe::3010] platform probe success 2434[ 2.283788] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2435[ 2.284177] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2436[ 2.284286] [0: swapper/0: 1] qcom_companion spi10.1: irq[0] cs[1] CPHA[0] CPOL[0] CS_HIGH[0] 2437[ 2.284337] [0: swapper/0: 1] qcom_companion spi10.1: max_speed[24000000] 2438[ 2.284377] [0: swapper/0: 1] msm_companion_spi_probe: irq[0] cs[1] CPHA[0] CPOL[0] CS_HIGH[0] 2439[ 2.284423] [0: swapper/0: 1] msm_companion_spi_probe: max_speed[24000000] 2440[ 2.284467] [0: swapper/0: 1] [syscamera][msm_companion_spi_setup::2739] cell-index 0, rc 0 2441[ 2.284587] [0: swapper/0: 1] [syscamera][msm_companion_spi_setup::2748] gpio-irq 92 2442[ 2.284633] [0: swapper/0: 1] [syscamera][msm_companion_spi_setup::2758] companion-device-id 29635, rc 0 2443[ 2.285033] [1: swapper/0: 1] [syscamera][msm_companion_init_module::3051] rc = 0, spi_rc = 0 2444[ 2.285639] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2445[ 2.285726] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2446[ 2.286008] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2447[ 2.286428] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2448[ 2.286592] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2449[ 2.286655] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2450[ 2.286960] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2451[ 2.287236] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2452[ 2.288840] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2453[ 2.288925] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2454[ 2.289097] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2455[ 2.289641] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2456[ 2.289838] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2457[ 2.289903] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2458[ 2.290224] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2459[ 2.290457] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2460[ 2.292046] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2461[ 2.292145] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2462[ 2.292325] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2463[ 2.292880] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2464[ 2.293167] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2465[ 2.293232] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2466[ 2.293564] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2467[ 2.293664] [0: swapper/0: 1] msm_thermal:disable_msm_thermal Max frequency reset for CPU0 2468[ 2.293713] [0: swapper/0: 1] msm_thermal:disable_msm_thermal Max frequency reset for CPU1 2469[ 2.293755] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2470[ 2.293806] [0: swapper/0: 1] msm_thermal:disable_msm_thermal Max frequency reset for CPU2 2471[ 2.293851] [0: swapper/0: 1] msm_thermal:disable_msm_thermal Max frequency reset for CPU3 2472[ 2.295280] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2473[ 2.295371] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2474[ 2.295543] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2475[ 2.296944] [1: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1] 2476[ 2.297298] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00] 2477[ 2.297505] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01] 2478[ 2.297703] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10] 2479[ 2.297894] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11] 2480[ 2.298104] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0] 2481[ 2.298289] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-] 2482[ 2.298480] [3: swapper/0: 1] lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-] 2483[ 2.299860] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2484[ 2.300159] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2485[ 2.300228] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2486[ 2.300578] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2487[ 2.300771] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2488[ 2.301955] [1: swapper/0: 1] parse_cpu_levels: idx 1 545 2489[ 2.301993] [1: swapper/0: 1] parse_cpu_levels: idx 2 1785 2490[ 2.302027] [1: swapper/0: 1] parse_cpu_levels: idx 2 3025 2491[ 2.302396] [1: swapper/0: 1] parse_cpu_levels: idx 1 545 2492[ 2.302429] [1: swapper/0: 1] parse_cpu_levels: idx 2 1785 2493[ 2.302466] [1: swapper/0: 1] parse_cpu_levels: idx 2 3025 2494[ 2.302497] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2495[ 2.302595] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2496[ 2.302752] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2497[ 2.303611] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2498[ 2.303827] [2: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2499[ 2.303892] [2: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2500[ 2.304197] [2: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2501[ 2.304472] [2: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2502[ 2.306047] [2: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2503[ 2.306134] [2: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2504[ 2.306181] [1: swapper/0: 1] rmnet_ipa started initialization 2505[ 2.306218] [1: swapper/0: 1] IPA SSR support = True 2506[ 2.306247] [1: swapper/0: 1] IPA ipa-loaduC = True 2507[ 2.306380] [2: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2508[ 2.307789] [3: swapper/0: 1] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 2509[ 2.307833] [3: swapper/0: 1] ipa ipa_uc_state_check:296 uC is not loaded 2510[ 2.308647] [3: swapper/0: 1] rmnet_ipa completed initialization 2511[ 2.309019] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2512[ 2.309408] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2513[ 2.309483] [1: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2514[ 2.309961] [1: kworker/u8:2: 50] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2515[ 2.310318] [1: kworker/u8:2: 50] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2516[ 2.312179] [1: kworker/u8:2: 50] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2517[ 2.312295] [1: kworker/u8:2: 50] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2518[ 2.312522] [1: kworker/u8:2: 50] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2519[ 2.312641] [3: swapper/0: 1] qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux. 2520[ 2.313104] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2521[ 2.313467] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2522[ 2.313539] [1: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2523[ 2.313985] [1: kworker/u8:2: 50] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2524[ 2.314328] [1: kworker/u8:2: 50] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2525[ 2.314381] [3: swapper/0: 1] sec_bat_parse_dt : slave_thermal_source is Empty 2526[ 2.314517] [3: swapper/0: 1] sec_bat_parse_dt : inbat_voltage is Empty 2527[ 2.314732] [3: swapper/0: 1] sec_bat_parse_dt : pre_afc_input_current is Empty 2528[ 2.314775] [3: swapper/0: 1] sec_bat_parse_dt : pre_wc_afc_input_current is Empty 2529[ 2.314890] [3: swapper/0: 1] sec_bat_parse_dt : store_mode_afc_input_current is Empty 2530[ 2.314942] [3: swapper/0: 1] sec_bat_parse_dt : store_mode_hv_wireless_input_current is Empty 2531[ 2.315100] [3: swapper/0: 1] sec_bat_parse_dt : HIGHLIMIT_THRESHOLD_NOLMAL(800), HIGHLIMIT_RECOVERY_NORMAL(750) 2532[ 2.315100] [3: swapper/0: 1] HIGH_THRESHOLD_NORMAL(550), HIGH_RECOVERY_NORMAL(500) LOW_THRESHOLD_NORMAL(-50), LOW_RECOVERY_NORMAL(0) 2533[ 2.315100] [3: swapper/0: 1] HIGHLIMIT_THRESHOLD_LPM(800), HIGHLIMIT_RECOVERY_LPM(750) 2534[ 2.315100] [3: swapper/0: 1] HIGH_THRESHOLD_LPM(550), HIGH_RECOVERY_LPM(510) LOW_THRESHOLD_LPM(-40), LOW_RECOVERY_LPM(-20) 2535[ 2.315433] [3: swapper/0: 1] sec_bat_parse_dt : SWELLING_HIGH_TEMP(450) SWELLING_HIGH_TEMP_RECOVERY(400) 2536[ 2.315433] [3: swapper/0: 1] SWELLING_LOW_TEMP(100) SWELLING_LOW_TEMP_RECOVERY(150) SWELLING_LOW_CURRENT(1500, 150), SWELLING_HIGH_CURRENT(2100, 150) 2537[ 2.315635] [3: swapper/0: 1] sec_bat_parse_dt num_age_step : 3 2538[ 2.315667] [3: swapper/0: 1] [0/2]cycle:0, float:43625, full_v:4275, recharge_v:4312, soc:93 2539[ 2.315709] [3: swapper/0: 1] [1/2]cycle:300, float:43250, full_v:4210, recharge_v:4260, soc:89 2540[ 2.315751] [3: swapper/0: 1] [2/2]cycle:500, float:42875, full_v:4170, recharge_v:4220, soc:85 2541[ 2.315868] [3: swapper/0: 1] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 4 2542[ 2.315868] [3: swapper/0: 1] cable_source_type : 1 2543[ 2.315868] [3: swapper/0: 1] polling_type : 1, initial_count : 3, check_count : 0 2544[ 2.315868] [3: swapper/0: 1] check_adc_max : 1440, check_adc_min : 0 2545[ 2.315868] [3: swapper/0: 1] ovp_uvlo_check_type : 3, thermal_source : 2 2546[ 2.315868] [3: swapper/0: 1] temp_check_type : 2, temp_check_count : 1 2547[ 2.316592] [1: kworker/u8:2: 50] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2548[ 2.316705] [1: kworker/u8:2: 50] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2549[ 2.316936] [1: kworker/u8:2: 50] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2550[ 2.316984] [2: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0 2551[ 2.317235] [2: kworker/2:0: 17] sec_bat_get_property cable type = 1 sleep_mode = 0 2552[ 2.318233] [2: swapper/0: 1] sec_battery_probe battery->wired_input_current : 500 2553[ 2.319024] [2: swapper/0: 1] sec_battery_probe battery->wireless_input_current : 480 2554[ 2.319065] [2: swapper/0: 1] sec_battery_probe battery->charging_current : 500 2555[ 2.321865] [2: swapper/0: 1] max77854_fg_read_vcell: VCELL(4281), data(0xd612) 2556[ 2.325541] [2: swapper/0: 1] sec_bat_get_property cable type = 1 sleep_mode = 0 2557[ 2.327078] [2: swapper/0: 1] max77854_fg_get_scaled_capacity : current_standard(1000) 2558[ 2.327119] [2: swapper/0: 1] max77854_fg_get_scaled_capacity : CABLE TYPE(1) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (1000) scaled capacity(96.8), raw_soc(96.8) 2559[ 2.327202] [2: swapper/0: 1] muic_notifier_register: listener=4 register 2560[ 2.327237] [1: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_cable_work: Start 2561[ 2.327282] [2: swapper/0: 1] [sec_bat_cable_check]ATTACHED(1) 2562[ 2.327313] [2: swapper/0: 1] sec_bat_set_misc_event: clear misc event(now=0x0, value=0x1) 2563[ 2.327356] [2: swapper/0: 1] sec-battery soc:battery: batt_handle_notification: current_cable(4), wc_status(0), wire_status(4) 2564[ 2.327409] [2: swapper/0: 1] batt_handle_notification : HV_CHARGER_NAME(NONE) 2565[ 2.327452] [2: swapper/0: 1] batt_handle_notification: CMD=ATTACH, attached_dev=1 2566[ 2.327488] [1: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_cable_work: Start 2567[ 2.327531] [1: kworker/u8:2: 50] max77854_chg_set_property: float voltage(43625) 2568[ 2.327568] [2: swapper/0: 1] vbus_notifier_register: listener=1 register 2569[ 2.327604] [2: swapper/0: 1] vbus_handle_notification: action=0, vbus_status=0 2570[ 2.327643] [2: swapper/0: 1] max77854_enable_aicl_irq 2571[ 2.330289] [1: kworker/u8:2: 50] max77854_set_float_voltage: battery cv voltage 0x99 2572[ 2.330332] [1: kworker/u8:2: 50] sec_bat_cable_work: float voltage = 43625 2573[ 2.335300] [1: kworker/u8:2: 50] max77854_set_buck : CHG_CNFG_00(0x15) 2574[ 2.336630] [2: swapper/0: 1] muic-hv:max77854_hv_muic_charger_init 2575[ 2.336678] [2: kworker/2:0: 17] muic-universal:max77854_hv_muic_detect_after_charger_init 2576[ 2.336727] [2: swapper/0: 1] sec_bat_get_property cable type = 4 sleep_mode = 0 2577[ 2.336766] [2: swapper/0: 1] sec-battery soc:battery: sec_battery_probe: SEC Battery Driver Loaded 2578[ 2.337066] [3: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 2579[ 2.337109] [2: swapper/0: 1] FIPS : Tcrypt Tests Start 2580[ 2.337360] [3: kworker/u8:3: 51] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 2581[ 2.337433] [3: kworker/u8:3: 51] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 2582[ 2.337759] [3: kworker/u8:3: 51] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 2583[ 2.337946] [3: kworker/u8:3: 51] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 2584[ 2.338153] [2: kworker/2:0: 17] muic-hv:max77854_hv_muic_detect_after_charger_init STATUS3:0x00 2585[ 2.339360] [3: kworker/u8:3: 51] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 2586[ 2.339463] [3: kworker/u8:3: 51] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 2587[ 2.339626] [3: kworker/u8:3: 51] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 2588[ 2.340090] [3: cryptomgr_test: 444] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed 2589[ 2.340361] [3: swapper/0: 1] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed 2590[ 2.341607] [2: kworker/u8:2: 50] max77854_set_charger_state : CHG_CNFG_00(0x15), CHG_CNFG_12(0x61) 2591[ 2.341793] [3: cryptomgr_test: 455] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed 2592[ 2.342115] [1: swapper/0: 1] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed 2593[ 2.342958] [2: kworker/u8:2: 50] max77854_change_charge_path : CHG_CNFG_12(0x20) 2594[ 2.342999] [2: kworker/u8:2: 50] sec_bat_set_charging_current: input_current : 500, charging_current : 700 2595[ 2.344169] [3: cryptomgr_test: 471] FIPS: self-tests for ctr(aes-generic) (ctr(aes)) passed 2596[ 2.344312] [3: cryptomgr_test: 472] FIPS: No test for gcm(aes-generic) (gcm_base(ctr(aes-generic),ghash-generic)) 2597[ 2.344358] [2: kworker/u8:2: 50] [max77854_set_charge_current] REG(0xb9) DATA(0x4e), CURRENT(700) 2598[ 2.344403] [2: kworker/u8:2: 50] max77854_set_topoff_current: reg_data(0x03), topoff(300mA) 2599[ 2.344879] [3: swapper/0: 1] FIPS: self-tests for gcm(aes-generic) (gcm(aes)) passed 2600[ 2.345004] [3: swapper/0: 1] FIPS: self-tests for ecb(aes-ce) (ecb(aes)) passed 2601[ 2.345741] [2: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes 2602[ 2.345797] [2: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_cable_work: Polling time is reset to 30 sec. 2603[ 2.346195] [3: cryptomgr_test: 483] FIPS: self-tests for cbc(aes-ce) (cbc(aes)) passed 2604[ 2.346460] [1: swapper/0: 1] FIPS: self-tests for cbc(aes-ce) (cbc(aes)) passed 2605[ 2.348721] [3: cryptomgr_test: 499] FIPS: self-tests for ctr(aes-ce) (ctr(aes)) passed 2606[ 2.348860] [3: cryptomgr_test: 500] FIPS: No test for gcm(aes-ce) (gcm_base(ctr(aes-ce),ghash-generic)) 2607[ 2.349304] [3: swapper/0: 1] FIPS: self-tests for gcm(aes-ce) (gcm(aes)) passed 2608[ 2.350452] [3: cryptomgr_test: 506] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed 2609[ 2.351092] [3: swapper/0: 1] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed 2610[ 2.352982] [3: cryptomgr_test: 517] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed 2611[ 2.353801] [1: swapper/0: 1] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed 2612[ 2.353927] [1: swapper/0: 1] FIPS: self-tests for sha1-generic (sha1) passed 2613[ 2.354616] [3: cryptomgr_test: 523] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed 2614[ 2.354774] [3: swapper/0: 1] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed 2615[ 2.354851] [3: swapper/0: 1] FIPS: self-tests for sha1-ce (sha1) passed 2616[ 2.355447] [3: cryptomgr_test: 529] FIPS: self-tests for hmac(sha1-ce) (hmac(sha1)) passed 2617[ 2.355569] [3: swapper/0: 1] FIPS: self-tests for hmac(sha1-ce) (hmac(sha1)) passed 2618[ 2.355688] [3: swapper/0: 1] FIPS: self-tests for sha224-generic (sha224) passed 2619[ 2.355798] [3: swapper/0: 1] FIPS: self-tests for sha256-generic (sha256) passed 2620[ 2.356453] [3: cryptomgr_test: 535] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed 2621[ 2.356610] [3: swapper/0: 1] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed 2622[ 2.357467] [3: cryptomgr_test: 541] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed 2623[ 2.357698] [3: swapper/0: 1] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed 2624[ 2.357780] [3: swapper/0: 1] FIPS: self-tests for sha224-ce (sha224) passed 2625[ 2.357853] [3: swapper/0: 1] FIPS: self-tests for sha256-ce (sha256) passed 2626[ 2.358451] [3: cryptomgr_test: 547] FIPS: self-tests for hmac(sha224-ce) (hmac(sha224)) passed 2627[ 2.358573] [3: swapper/0: 1] FIPS: self-tests for hmac(sha224-ce) (hmac(sha224)) passed 2628[ 2.358687] [3: swapper/0: 1] FIPS: self-tests for hmac(sha256-ce) (hmac(sha256)) passed 2629[ 2.358803] [3: swapper/0: 1] FIPS: self-tests for sha384-generic (sha384) passed 2630[ 2.358916] [3: swapper/0: 1] FIPS: self-tests for sha512-generic (sha512) passed 2631[ 2.359591] [3: cryptomgr_test: 553] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed 2632[ 2.359785] [3: swapper/0: 1] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed 2633[ 2.360674] [3: cryptomgr_test: 559] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed 2634[ 2.360868] [3: swapper/0: 1] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed 2635[ 2.361195] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_ctr_aes128 (stdrng) passed 2636[ 2.361308] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_ctr_aes192 (stdrng) passed 2637[ 2.361436] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_ctr_aes256 (stdrng) passed 2638[ 2.361478] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_sha1 (stdrng) passed 2639[ 2.361521] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_sha384 (stdrng) passed 2640[ 2.361564] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_sha512 (stdrng) passed 2641[ 2.361739] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_sha256 (stdrng) passed 2642[ 2.361787] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed 2643[ 2.361828] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha384 (stdrng) passed 2644[ 2.361874] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed 2645[ 2.362142] [3: swapper/0: 1] FIPS: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed 2646[ 2.362448] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_ctr_aes128 (stdrng) passed 2647[ 2.362499] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_ctr_aes192 (stdrng) passed 2648[ 2.362540] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_ctr_aes256 (stdrng) passed 2649[ 2.362585] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_sha1 (stdrng) passed 2650[ 2.362627] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_sha384 (stdrng) passed 2651[ 2.362664] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_sha512 (stdrng) passed 2652[ 2.362860] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_sha256 (stdrng) passed 2653[ 2.362903] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha1 (stdrng) passed 2654[ 2.362945] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha384 (stdrng) passed 2655[ 2.362993] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha512 (stdrng) passed 2656[ 2.363258] [3: swapper/0: 1] FIPS: self-tests for drbg_pr_hmac_sha256 (stdrng) passed 2657[ 2.363306] [3: swapper/0: 1] FIPS : Tcrypt Tests End 2658[ 2.380051] [1: kworker/u8:7: 324] max77854_aicl_isr_work: 2659[ 2.390060] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: dwc3_resume_work: dwc3 resume work 2660[ 2.390114] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: XCVR: ID set 2661[ 2.390151] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: XCVR: BSV set 2662[ 2.390193] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: b_idle state 2663[ 2.392382] [1: kworker/1:1: 70] PHY Tune1:d0,Tune2:43,Tune3:81,Tune4:c0 2664[ 2.406122] [1: kworker/1:1: 70] msm-usb-ssphy-qmp 7410000.ssphy: QMP PHY initialization timeout 2665[ 2.406170] [1: kworker/1:1: 70] msm-usb-ssphy-qmp 7410000.ssphy: USB3_PHY_PCS_STATUS:69696969 2666[ 2.410482] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: DWC3 exited from low power mode 2667[ 2.410528] [1: kworker/1:1: 70] ------------[ cut here ]------------ 2668[ 2.410569] [1: kworker/1:1: 70] WARNING: CPU: 1 PID: 70 at /home/dpi/qb5_8814/workspace/HEROQLTE_USA_ATT/android/kernel/kernel/irq/manage.c:444 __enable_irq+0x40/0x88() 2669[ 2.410639] [1: kworker/1:1: 70] Unbalanced enable for IRQ 547 2670[ 2.410671] [1: kworker/1:1: 70] Modules linked in: 2671[ 2.410704] [1: kworker/1:1: 70] CPU: 1 PID: 70 Comm: kworker/1:1 Tainted: G W 3.18.20-8575098 #1 2672[ 2.410753] [1: kworker/1:1: 70] Hardware name: Samsung HEROQ LTE PROJECT Rev15 (DT) 2673[ 2.410796] [1: kworker/1:1: 70] Workqueue: events dwc3_otg_sm_work 2674[ 2.410831] [1: kworker/1:1: 70] Call trace: 2675[ 2.410860] [1: kworker/1:1: 70] [<ffffffc00011087c>] dump_backtrace+0x0/0x10c 2676[ 2.410899] [1: kworker/1:1: 70] [<ffffffc000110998>] show_stack+0x10/0x1c 2677[ 2.410940] [1: kworker/1:1: 70] [<ffffffc000d76668>] dump_stack+0x80/0xc4 2678[ 2.410978] [1: kworker/1:1: 70] [<ffffffc00012714c>] warn_slowpath_common+0x88/0xb0 2679[ 2.411019] [1: kworker/1:1: 70] [<ffffffc0001271c0>] warn_slowpath_fmt+0x4c/0x58 2680[ 2.411059] [1: kworker/1:1: 70] [<ffffffc0001729f8>] __enable_irq+0x3c/0x88 2681[ 2.411096] [1: kworker/1:1: 70] [<ffffffc000172aa8>] enable_irq+0x64/0x78 2682[ 2.411134] [1: kworker/1:1: 70] [<ffffffc000757a18>] dwc3_msm_resume+0x3e4/0x418 2683[ 2.411173] [1: kworker/1:1: 70] [<ffffffc000757a74>] dwc3_msm_runtime_resume+0x28/0x38 2684[ 2.411217] [1: kworker/1:1: 70] [<ffffffc0005db150>] pm_generic_runtime_resume+0x28/0x3c 2685[ 2.411260] [1: kworker/1:1: 70] [<ffffffc0005dca04>] __rpm_callback+0x3c/0x74 2686[ 2.411298] [1: kworker/1:1: 70] [<ffffffc0005dca9c>] rpm_callback+0x60/0x84 2687[ 2.411335] [1: kworker/1:1: 70] [<ffffffc0005dd9f0>] rpm_resume+0x364/0x478 2688[ 2.411373] [1: kworker/1:1: 70] [<ffffffc0005ddb4c>] __pm_runtime_resume+0x48/0x70 2689[ 2.411413] [1: kworker/1:1: 70] [<ffffffc000758138>] dwc3_otg_sm_work+0x320/0x574 2690[ 2.411455] [1: kworker/1:1: 70] [<ffffffc00013bbb0>] process_one_work+0x288/0x444 2691[ 2.411495] [1: kworker/1:1: 70] [<ffffffc00013cb6c>] worker_thread+0x318/0x438 2692[ 2.411533] [1: kworker/1:1: 70] [<ffffffc000140b84>] kthread+0xe0/0xec 2693[ 2.411569] [1: kworker/1:1: 70] ---[ end trace a24c810b3f7fdcf1 ]--- 2694[ 2.411617] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: dwc3_otg_start_peripheral: turn on gadget dwc3-gadget 2695[ 2.412889] [1: kworker/1:1: 70] usb: dwc3_gadget_vbus_session is_active: 1 2696[ 2.412939] [1: kworker/1:1: 70] msm-dwc3 6a00000.ssusb: b_peripheral state 2697[ 2.420071] [3: kworker/3:1: 33] msm8996-pinctrl 1010000.pinctrl: not freeing pin 6 (GPIO_6) as part of deactivating group gpio6 - it is already used for some other setting 2698[ 2.420144] [3: kworker/3:1: 33] msm8996-pinctrl 1010000.pinctrl: not freeing pin 7 (GPIO_7) as part of deactivating group gpio7 - it is already used for some other setting 2699[ 2.442768] [2: swapper/0: 1] FIPS: Integrity Check Passed 2700[ 2.442816] [2: swapper/0: 1] tcrypt: CRYPTO API started in FIPS mode!!! 2701[ 2.444581] [2: swapper/0: 1] rome_vreg: disabling 2702[ 2.444611] [2: swapper/0: 1] gdsc_mmagic_bimc: disabling 2703[ 2.444679] [2: swapper/0: 1] kryo1-retention: disabling 2704[ 2.444713] [2: swapper/0: 1] kryo0-retention: disabling 2705[ 2.444742] [2: swapper/0: 1] gfx_mem_acc_corner: disabling 2706[ 2.444778] [2: swapper/0: 1] apcc_l3_mem_acc_corner: disabling 2707[ 2.444817] [2: swapper/0: 1] apc1_perfcl_mem_acc_corner: disabling 2708[ 2.444849] [2: swapper/0: 1] apc0_pwrcl_mem_acc_corner: disabling 2709[ 2.444892] [2: swapper/0: 1] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests 2710[ 2.445212] [2: swapper/0: 1] clock_late_init: Removing enables held for handed-off clocks 2711[ 2.449123] [2: swapper/0: 1] ALSA device list: 2712[ 2.449153] [2: swapper/0: 1] No soundcards found. 2713[ 2.449237] [2: swapper/0: 1] Warning: unable to open an initial console. 2714[ 2.450424] [2: init: 1] !@Boot: start init process 2715[ 2.450575] [2: init: 1] init: init started! 2716[ 2.450722] [2: init: 1] init: Function: selinux_compare_spd_ram, index[0], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2717[ 2.454828] [2: init: 1] SELinux: 2048 avtab hash slots, 22571 rules. 2718[ 2.459943] [2: init: 1] SELinux: 2048 avtab hash slots, 22571 rules. 2719[ 2.460096] [2: init: 1] SELinux: 1 users, 2 roles, 1905 types, 0 bools, 1 sens, 1024 cats 2720[ 2.460151] [2: init: 1] SELinux: 87 classes, 22571 rules 2721[ 2.462717] [2: init: 1] SELinux: Permission audit_read in class capability2 not defined in policy. 2722[ 2.462776] [2: init: 1] SELinux: the above unknown classes and permissions will be denied 2723[ 2.462847] [2: init: 1] SELinux: Completing initialization. 2724[ 2.462880] [2: init: 1] SELinux: Setting up existing superblocks. 2725[ 2.462927] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2726[ 2.462994] [2: init: 1] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts 2727[ 2.463104] [2: init: 1] SELinux: initialized (dev bdev, type bdev), not configured for labeling 2728[ 2.463166] [2: init: 1] SELinux: initialized (dev proc, type proc), uses genfs_contexts 2729[ 2.463235] [2: init: 1] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts 2730[ 2.489629] [2: init: 1] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs 2731[ 2.489685] [2: init: 1] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs 2732[ 2.489736] [2: init: 1] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts 2733[ 2.489796] [2: init: 1] SELinux: initialized (dev aio, type aio), not configured for labeling 2734[ 2.489848] [2: init: 1] SELinux: initialized (dev devpts, type devpts), uses transition SIDs 2735[ 2.489912] [2: init: 1] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts 2736[ 2.490012] [2: init: 1] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts 2737[ 2.490093] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2738[ 2.490150] [2: init: 1] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts 2739[ 2.494504] [2: init: 1] init: SELinux: Loaded policy from /sepolicy 2740[ 2.495115] [2: init: 1] inside Iccc_SaveData_Kernel 2741[ 2.495148] [2: init: 1] Iccc_SaveData_Kernel: Not ready! type:0xff000002, ret:1 2742[ 2.495517] [2: init: 1] init: (Initializing SELinux enforcing took 0.04s.) 2743[ 2.495668] [2: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2744[ 2.502000] [3: kworker/u8:2: 50] [FG] 0080h,ffa3h,7f80h,ff01h,1900h,15beh,60d3h,5cadh,1a99h,d612h,0006h,f8a6h,0055h,648ch,60cdh,15c0h,1580h,1638h,2a00h,5d00h,01f2h,0148h,196ch,02afh,173bh,d482h,290dh,da96h,46ach,0314h,0500h,1570h,ffffh,20c0h,1400h,158ch,1403h,2305h,196bh,7f4ch,2473h,cea4h,2039h,09d0h,e3e1h,290eh,0400h,0001h,20aah,4319h,0900h,ffffh,1e28h,1675h,123ch,05e0h,007eh,3639h,7d54h,f889h,1680h,1408h,74feh,e000h,78b4h,a8e6h,0800h,0000h,d5e3h,061dh,38bch,00f5h,6445h,2241h,158ah,0000h,0f11h,0ef6h,c624h,15d5h,0000h,0000h,7f80h,0000h,7f80h,0005h,00bah,0954h,0000h,006bh,090ch,0050h,0c1ah,0204h,0779h,0002h,0000h,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0014h,ffffh,60d6h,15ach,0467h,1000h,e90dh,7fffh,22e6h,0000h,1a2dh,000bh,4c40h,fff8h,4200h,0000h,4000h,0000h,a760h,0308h,0000h,0000h,0000h,0000h,23deh,0000h,0100h,f8b0h,3fa6h,591eh,fd88h,d78fh,0072h,2910h,d448h,6388h, 2745[ 2.522714] [2: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. 2746[ 2.523850] [2: init: 1] init: SELinux: set fc_digest(/sbin) 2747[ 2.526305] [2: init: 1] init: init second stage started! 2748[ 2.526978] [2: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2749[ 2.533262] [3: kworker/u8:2: 50] sec_bat_get_property cable type = 4 sleep_mode = 0 2750[ 2.534807] [3: kworker/u8:2: 50] max77854_fg_get_scaled_capacity : current_standard(1000) 2751[ 2.534849] [3: kworker/u8:2: 50] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (1000) scaled capacity(96.8), raw_soc(96.8) 2752[ 2.534925] [3: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4281mV),Inow(-274mA),Imax(500mA),SOC(96%),Tbat(269),Tchg(330),Twpc(330),sw_self_dis(0) 2753[ 2.535750] [3: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 420 sec, passed time: 0 2754[ 2.537847] [3: kworker/u8:2: 50] max77854_get_charging_health: reg_data(0x3) 2755[ 2.538636] [3: kworker/u8:2: 50] sec_bat_get_property cable type = 4 sleep_mode = 0 2756[ 2.538674] [3: kworker/u8:2: 50] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 2757[ 2.540223] [3: kworker/u8:2: 50] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 2758[ 2.554417] [3: kworker/u8:2: 50] MAX77854 : [0xb1]0x5e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 2759[ 2.554524] [3: kworker/u8:2: 50] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%), HV(NONE), sleep_mode(0), Cycle(-1) 2760[ 2.554654] [3: kworker/3:1: 33] sec_bat_get_property cable type = 4 sleep_mode = 0 2761[ 2.555305] [2: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. 2762[ 2.555391] [2: init: 1] init: Function: selinux_compare_spd_ram, index[2], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2763[ 2.556078] [2: init: 1] init: SELinux: Loaded property_contexts from /property_contexts. 2764[ 2.556151] [2: init: 1] init: Function: selinux_compare_spd_ram, index[6], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2765[ 2.770108] [3: kworker/3:1: 33] [keys] flip_cover_work : 1 2766[ 2.777769] [2: init: 1] init: waitpid failed: No child processes 2767[ 2.777944] [2: init: 1] init: (Loading properties from /default.prop took 0.00s.) 2768[ 2.779885] [2: init: 1] init: (Parsing /init.environ.rc took 0.00s.) 2769[ 2.780059] [2: init: 1] init: (Parsing /init.usb.rc took 0.00s.) 2770[ 2.781642] [2: init: 1] init: (Parsing init.qcom.usb.rc took 0.00s.) 2771[ 2.782002] [2: init: 1] init: (Parsing init.target.rc took 0.00s.) 2772[ 2.782227] [2: init: 1] init: could not import file 'init.remove_recovery.rc' from 'init.qcom.factory.rc' 2773[ 2.782285] [2: init: 1] init: (Parsing init.qcom.factory.rc took 0.00s.) 2774[ 2.782328] [2: init: 1] init: (Parsing /init.qcom.rc took 0.00s.) 2775[ 2.782508] [2: init: 1] init: (Parsing /init.usb.configfs.rc took 0.00s.) 2776[ 2.782590] [2: init: 1] init: (Parsing /init.zygote64_32.rc took 0.00s.) 2777[ 2.782706] [2: init: 1] init: (Parsing /init.trace.rc took 0.00s.) 2778[ 2.782800] [2: init: 1] init: /init.carrier.rc: 77: ignored duplicate definition of service 'fingerprintd' 2779[ 2.782901] [2: init: 1] init: (Parsing /init.carrier.rc took 0.00s.) 2780[ 2.783019] [2: init: 1] init: (Parsing /init.rilcarrier.rc took 0.00s.) 2781[ 2.783102] [2: init: 1] init: /init.rilchip.rc: 22: ignored duplicate definition of service 'qmuxd' 2782[ 2.783160] [2: init: 1] init: /init.rilchip.rc: 27: ignored duplicate definition of service 'diag_mdlog_start' 2783[ 2.783220] [2: init: 1] init: /init.rilchip.rc: 34: ignored duplicate definition of service 'diag_mdlog_stop' 2784[ 2.783323] [2: init: 1] init: (Parsing /init.rilchip.rc took 0.00s.) 2785[ 2.783400] [2: init: 1] init: (Parsing /init.rilepdg.rc took 0.00s.) 2786[ 2.783442] [2: init: 1] init: (Parsing /init.rilcommon.rc took 0.00s.) 2787[ 2.783567] [2: init: 1] init: (Parsing /init.container.rc took 0.00s.) 2788[ 2.783619] [2: init: 1] init: could not import file '/init.fac.rc' from '/init.rc' 2789[ 2.783674] [2: init: 1] init: could not import file '/init.sec_debug.rc' from '/init.rc' 2790[ 2.783721] [2: init: 1] init: (Parsing /init.rc took 0.00s.) 2791[ 2.783951] [2: init: 1] init: Starting service 'ueventd'... 2792[ 2.785232] [2: init: 1] init: Waiting for /dev/.coldboot_done... 2793[ 2.787289] [3: ueventd: 563] ueventd: ueventd started! 2794[ 2.787946] [3: ueventd: 563] ueventd: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2795[ 2.814846] [3: ueventd: 563] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts. 2796[ 2.818278] [3: ueventd: 563] ueventd: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2797[ 2.845254] [3: ueventd: 563] ueventd: SELinux: Loaded file_contexts contexts from /file_contexts. 2798[ 3.011673] [3: ueventd: 563] sec_bat_get_property cable type = 4 sleep_mode = 0 2799[ 3.017513] [3: ueventd: 563] max77854_get_charger_state : charger status (0x31) 2800[ 3.018305] [3: ueventd: 563] max77854_check_battery : CHG_INT_OK(0xdd) 2801[ 3.019088] [3: ueventd: 563] max77854_check_battery : CHG_DETAILS00(0x60) 2802[ 3.023501] [3: ueventd: 563] max77854_get_charging_health: reg_data(0x3) 2803[ 3.024301] [3: ueventd: 563] sec_bat_get_property cable type = 4 sleep_mode = 0 2804[ 3.024339] [3: ueventd: 563] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 2805[ 3.025869] [3: ueventd: 563] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 2806[ 3.040150] [0: kworker/0:1: 43] msm8996-pinctrl 1010000.pinctrl: not freeing pin 0 (GPIO_0) as part of deactivating group gpio0 - it is already used for some other setting 2807[ 3.040229] [0: kworker/0:1: 43] msm8996-pinctrl 1010000.pinctrl: not freeing pin 1 (GPIO_1) as part of deactivating group gpio1 - it is already used for some other setting 2808[ 3.040307] [0: kworker/0:1: 43] msm8996-pinctrl 1010000.pinctrl: not freeing pin 2 (GPIO_2) as part of deactivating group gpio2 - it is already used for some other setting 2809[ 3.040383] [0: kworker/0:1: 43] msm8996-pinctrl 1010000.pinctrl: not freeing pin 3 (GPIO_3) as part of deactivating group gpio3 - it is already used for some other setting 2810[ 3.042534] [3: ueventd: 563] MAX77854 : [0xb1]0x5e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 2811[ 3.046939] [3: ueventd: 563] power_supply max77854-fuelgauge: driver failed to report `status' property: -22 2812[ 3.049854] [3: ueventd: 563] p9220_chg_get_property charger->pdata->cs100_status 0 2813[ 3.049900] [3: ueventd: 563] p9220_chg_get_property wrong mode 2814[ 3.049933] [3: ueventd: 563] p9220_chg_get_property cable_type =0 2815[ 3.049933] [3: ueventd: 563] 2816[ 3.050902] [3: ueventd: 563] p9220-charger 1-0061: p9220_reg_read: i2c read error, reg: 0x3e, ret: -6 2817[ 3.050948] [3: ueventd: 563] p9220_get_vout: fail to read vout. (-1) 2818[ 3.384427] [3: ueventd: 563] ueventd: Coldboot took 0.57s. 2819[ 3.390209] [0: init: 1] init: Waiting for /dev/.coldboot_done took 0.60s. 2820[ 3.391121] [0: init: 1] keychord: using input dev qpnp_pon for fevent 2821[ 3.391167] [0: init: 1] keychord: using input dev gpio-keys for fevent 2822[ 3.394051] [2: init: 1] LIBFFU: FFU Target : SEC UFS 2823[ 3.394090] [2: init: 1] LIBFFU: Don't need FFU 2824[ 3.394993] [2: init: 1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 2825[ 3.395533] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2826[ 3.396784] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2827[ 3.396949] [2: init: 1] init: SELinux: set fc_digest(/mnt) 2828[ 3.397317] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2829[ 3.397709] [2: init: 1] init: SELinux: set fc_digest(/mnt/secure/staging) 2830[ 3.398004] [2: init: 1] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2831[ 3.398144] [2: init: 1] init: SELinux: set fc_digest(/mnt/secure/asec) 2832[ 3.400498] [2: init: 1] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory 2833[ 3.400575] [2: init: 1] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory 2834[ 3.400714] [2: init: 1] init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory 2835[ 3.401877] [2: init: 1] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts 2836[ 3.402146] [2: init: 1] init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument 2837[ 3.405193] [3: init: 1] Registered swp emulation handler 2838[ 3.408386] [3: init: 1] SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts 2839[ 3.659683] [3: init: 568] fs_mgr: debug: ro.security_mode is 1526595585 2840[ 3.659729] [3: init: 568] fs_mgr: KAP is enabled 2841[ 3.662978] [3: init: 568] fs_mgr: Verify signature ... 2842[ 3.663309] [3: init: 568] fs_mgr: dmv : write data to pipefd 2843[ 3.663452] [3: init: 568] fs_mgr: dmv : start to wait for child process 2844[ 3.663493] [1: init: 571] fs_mgr: dmv : execve verify process 2845[ 3.669251] [3: init: 568] fs_mgr: Blob verification success : 0 2846[ 3.669352] [3: init: 568] fs_mgr: Enabling dm-verity for system (mode 0) 2847[ 3.671863] [0: init: 568] device-mapper: table: 254:0: adding target device sda20 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 2848[ 3.671958] [0: init: 568] device-mapper: table: 254:0: adding target device sda20 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 2849[ 3.673984] [1: kworker/u8:2: 50] device-mapper: verity: data block 0 is corrupted 2850[ 3.676440] [0: init: 568] EXT4-fs (dm-0): mounted filesystem without journal. Opts: errors=panic,noload 2851[ 3.676517] [0: init: 568] SELinux: initialized (dev dm-0, type ext4), uses xattr 2852[ 3.676686] [0: init: 568] fs_mgr: __mount(source=/dev/block/dm-0,target=/system,type=ext4)=0 2853[ 3.678180] [0: init: 568] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/bootdevice/by-name/userdata for mount /data type ext4 ) 2854[ 3.678334] [0: init: 568] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs 2855[ 3.683742] [0: init: 568] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/efs 2856[ 3.704136] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: would move BOOTING -> BOOTING (00 -> 00) 2857[ 3.704203] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: has moved BOOTING -> BOOTING (00 -> 00) 2858[ 3.704262] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_switch_to_va_firmware: switching to VA firmware 2859[ 3.704314] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_va_firmware_ready 2860[ 3.704481] [0:dbmdx probe thr: 396] msm8996-pinctrl 1010000.pinctrl: not freeing pin 0 (GPIO_0) as part of deactivating group gpio0 - it is already used for some other setting 2861[ 3.704558] [0:dbmdx probe thr: 396] msm8996-pinctrl 1010000.pinctrl: not freeing pin 1 (GPIO_1) as part of deactivating group gpio1 - it is already used for some other setting 2862[ 3.704633] [0:dbmdx probe thr: 396] msm8996-pinctrl 1010000.pinctrl: not freeing pin 2 (GPIO_2) as part of deactivating group gpio2 - it is already used for some other setting 2863[ 3.704707] [0:dbmdx probe thr: 396] msm8996-pinctrl 1010000.pinctrl: not freeing pin 3 (GPIO_3) as part of deactivating group gpio3 - it is already used for some other setting 2864[ 3.705163] [0:dbmdx probe thr: 396] dbmd4-spi spi0.0: spi_prepare_boot: speed 4800000 hZ 2865[ 3.706342] [2: kworker/u8:7: 324] [FG] 0080h,ffa3h,7f80h,ff01h,1900h,15beh,60d3h,5cadh,1ae6h,d728h,078dh,f94ch,004ch,648ch,60cdh,15bfh,1589h,18c4h,2a00h,5d00h,01f3h,0148h,1971h,02afh,173bh,d496h,290dh,da96h,46ach,0314h,0500h,1574h,ffffh,20c0h,1400h,158ch,1403h,2305h,1970h,7f80h,2473h,cea4h,2039h,09d0h,e3e1h,290eh,0400h,0001h,20deh,4350h,0900h,ffffh,1df4h,1675h,123ch,05e0h,007eh,3639h,7d54h,f94ch,1680h,1008h,7505h,e000h,78b4h,a8e6h,0800h,0000h,d5e3h,061dh,38bch,0104h,6445h,2241h,1587h,0000h,0f11h,0ef6h,bd55h,15d5h,0000h,0000h,7f80h,0000h,7f80h,0005h,00bah,0954h,0000h,006bh,090ch,0050h,0b74h,0204h,0779h,0002h,0000h,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0013h,ffffh,60d0h,15ach,0280h,0000h,c500h,0006h,0800h,0000h,d5d8h,ffffh,4c40h,fff8h,4200h,0000h,4000h,0000h,7d00h,0308h,0000h,0000h,0000h,0000h,23b5h,0000h,0000h,fa92h,3fc0h,59c6h,ff85h,d78eh,0072h,2910h,d5d8h,6388h, 2866[ 3.735975] [1: init: 568] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 2867[ 3.735975] [1: init: 568] 2868[ 3.736063] [1: init: 568] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. 2869[ 3.736063] [1: init: 568] 2870[ 3.736137] [1: init: 568] e2fsck: check whether gdt & bitmap free count is vaild 2871[ 3.736137] [1: init: 568] 2872[ 3.736205] [1: init: 568] e2fsck: /dev/block/bootdevice/by-name/efs: clean, 132/1280 files, 1260/5120 blocks 2873[ 3.736205] [1: init: 568] 2874[ 3.736283] [1: init: 568] e2fsck: ext2fs_close2 : normal operation, return 0 2875[ 3.736283] [1: init: 568] 2876[ 3.737483] [3: kworker/u8:7: 324] sec_bat_get_property cable type = 4 sleep_mode = 0 2877[ 3.739038] [3: kworker/u8:7: 324] max77854_fg_get_scaled_capacity : current_standard(1000) 2878[ 3.739081] [3: kworker/u8:7: 324] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (1000) scaled capacity(96.8), raw_soc(96.8) 2879[ 3.739157] [3: kworker/u8:7: 324] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4303mV),Inow(-53mA),Imax(500mA),SOC(96%),Tbat(270),Tchg(330),Twpc(330),sw_self_dis(0) 2880[ 3.739505] [1: init: 568] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,data=ordered,errors=panic 2881[ 3.739596] [1: init: 568] SELinux: initialized (dev sda6, type ext4), uses xattr 2882[ 3.739705] [1: init: 568] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/efs,target=/efs,type=ext4)=0 2883[ 3.739973] [3: kworker/u8:7: 324] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 420 sec, passed time: 0 2884[ 3.741853] [2: init: 1] init: Running /dev/block/bootdevice/by-name/cache on ext4 2885[ 3.742109] [3: kworker/u8:7: 324] max77854_get_charging_health: reg_data(0x3) 2886[ 3.742911] [3: kworker/u8:7: 324] sec_bat_get_property cable type = 4 sleep_mode = 0 2887[ 3.742950] [3: kworker/u8:7: 324] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 2888[ 3.744463] [3: kworker/u8:7: 324] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 2889[ 3.750110] [2: e2fsck: 580] e2fsck 1.42.9 (28-Dec-2013) 2890[ 3.751515] [2: e2fsck: 580] skipping journal recoverybecause INCOMPAT_RECOVER was clear. 2891[ 3.751582] [2: e2fsck: 580] check whether gdt & bitmap free count is vaild 2892[ 3.752059] [2: e2fsck: 580] /dev/block/bootdevice/by-name/cache: clean, 26/65536 files, 8521/262144 blocks 2893[ 3.753336] [2: e2fsck: 580] ext2fs_close2 : normal operation, return 0 2894[ 3.756455] [0: init: 1] EXT4-fs (sda21): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic 2895[ 3.756542] [0: init: 1] SELinux: initialized (dev sda21, type ext4), uses xattr 2896[ 3.756725] [0: init: 1] init: Running /dev/block/bootdevice/by-name/persist on ext4 2897[ 3.758732] [3: kworker/u8:7: 324] MAX77854 : [0xb1]0x5e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 2898[ 3.758843] [3: kworker/u8:7: 324] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%), HV(NONE), sleep_mode(0), Cycle(-1) 2899[ 3.758974] [3: kworker/3:1: 33] sec_bat_get_property cable type = 4 sleep_mode = 0 2900[ 3.762758] [2: e2fsck: 583] e2fsck 1.42.9 (28-Dec-2013) 2901[ 3.763946] [2: e2fsck: 583] skipping journal recoverybecause INCOMPAT_RECOVER was clear. 2902[ 3.764009] [2: e2fsck: 583] check whether gdt & bitmap free count is vaild 2903[ 3.764116] [2: e2fsck: 583] /dev/block/bootdevice/by-name/persist: clean, 40/2048 files, 1187/8192 blocks 2904[ 3.764364] [2: e2fsck: 583] ext2fs_close2 : normal operation, return 0 2905[ 3.767421] [0: init: 1] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,errors=panic 2906[ 3.767510] [0: init: 1] SELinux: initialized (dev sda5, type ext4), uses xattr 2907[ 3.767971] [0: init: 1] init: SELinux: Skipping restorecon_recursive(/persist) 2908[ 3.768969] [0: init: 1] init: Running /dev/block/bootdevice/by-name/efs on ext4 2909[ 3.774820] [2: e2fsck: 586] e2fsck 1.42.9 (28-Dec-2013) 2910[ 3.774961] [2: e2fsck: 586] /dev/block/bootdevice/by-name/efs is in use. 2911[ 3.775003] [2: e2fsck: 586] e2fsck: Cannot continue, aborting. 2912[ 3.775003] [2: e2fsck: 586] 2913[ 3.775003] [2: e2fsck: 586] 2914[ 3.797222] [3: init: 1] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: barrier=1 2915[ 3.797283] [3: init: 1] SELinux: initialized (dev sdd7, type ext4), uses xattr 2916[ 3.797627] [3: init: 1] init: SELinux: Skipping restorecon_recursive(/dsp) 2917[ 3.797753] [3: init: 1] FAT-fs (sda15[8:15]): trying to mount... 2918[ 3.798585] [3: init: 1] FAT-fs (sda15[8:15]): mounted successfully! 2919[ 3.798752] [3: init: 1] SELinux: initialized (dev sda15, type vfat), uses mountpoint labeling 2920[ 3.798968] [3: init: 1] FAT-fs (sda16[259:0]): trying to mount... 2921[ 3.799843] [3: init: 1] FAT-fs (sda16[259:0]): mounted successfully! 2922[ 3.799894] [3: init: 1] SELinux: initialized (dev sda16, type vfat), uses mountpoint labeling 2923[ 3.800041] [3: init: 1] FAT-fs (sdd12[8:60]): trying to mount... 2924[ 3.800284] [2: init: 1] FAT-fs (sdd12[8:60]): bogus number of reserved sectors 2925[ 3.800327] [2: init: 1] FAT-fs (sdd12[8:60]): Can't find a valid FAT filesystem 2926[ 3.800368] [2: init: 1] FAT-fs (sdd12[8:60]): failed to mount! 2927[ 3.801223] [2: init: 1] init: Running /dev/block/bootdevice/by-name/persdata on ext4 2928[ 3.807084] [3: e2fsck: 589] e2fsck 1.42.9 (28-Dec-2013) 2929[ 3.808173] [3: e2fsck: 589] skipping journal recoverybecause INCOMPAT_RECOVER was clear. 2930[ 3.808235] [3: e2fsck: 589] check whether gdt & bitmap free count is vaild 2931[ 3.808344] [3: e2fsck: 589] /dev/block/bootdevice/by-name/persdata: clean, 21/288 files, 1114/2304 blocks 2932[ 3.808620] [2: e2fsck: 589] ext2fs_close2 : normal operation, return 0 2933[ 3.810842] [0: init: 1] EXT4-fs (sda19): mounted filesystem with ordered data mode. Opts: barrier=1 2934[ 3.810913] [0: init: 1] SELinux: initialized (dev sda19, type ext4), uses xattr 2935[ 3.811881] [0: init: 1] init: SELinux: Skipping restorecon_recursive(/cache) 2936[ 3.822151] [3: init: 1] init: property_set("ro.hwui.texture_cache_size", "72") failed 2937[ 3.822211] [3: init: 1] init: property_set("ro.hwui.layer_cache_size", "48") failed 2938[ 3.822264] [3: init: 1] init: property_set("ro.hwui.r_buffer_cache_size", "8") failed 2939[ 3.822315] [3: init: 1] init: property_set("ro.hwui.path_cache_size", "32") failed 2940[ 3.822364] [3: init: 1] init: property_set("ro.hwui.gradient_cache_size", "1") failed 2941[ 3.822415] [3: init: 1] init: property_set("ro.hwui.drop_shadow_cache_size", "6") failed 2942[ 3.822466] [3: init: 1] init: property_set("ro.hwui.texture_cache_flushrate", "0.4") failed 2943[ 3.822520] [3: init: 1] init: property_set("ro.hwui.text_small_cache_width", "1024") failed 2944[ 3.822573] [3: init: 1] init: property_set("ro.hwui.text_small_cache_height", "1024") failed 2945[ 3.822624] [3: init: 1] init: property_set("ro.hwui.text_large_cache_width", "2048") failed 2946[ 3.822673] [3: init: 1] init: property_set("ro.hwui.text_large_cache_height", "1024") failed 2947[ 3.828421] [3: init: 1] init: (Loading properties from /system/build.prop took 0.01s.) 2948[ 3.828521] [3: init: 1] init: (Loading properties from /vendor/build.prop took 0.00s.) 2949[ 3.828580] [3: init: 1] init: (Loading properties from /factory/factory.prop took 0.00s.) 2950[ 4.067028] [1:dbmdx probe thr: 396] dbmd4-spi spi0.0: send_spi_cmd_boot: send_spi_cmd_boot = 805a0e00 2951[ 4.069423] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmd4_spi_boot: ---------> firmware loaded 2952[ 4.069475] [0:dbmdx probe thr: 396] dbmd4-spi spi0.0: send_spi_cmd_boot: send_spi_cmd_boot = 805a0b00 2953[ 4.079086] [3: init: 1] init: /recovery not specified in fstab 2954[ 4.079212] [3: init: 1] init: property_set("ro.vold.forceencryption", "1") failed 2955[ 4.079327] [3: init: 1] init: Function: selinux_compare_spd_ram, index[0], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2956[ 4.080191] [3: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2957[ 4.106993] [3: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. 2958[ 4.107084] [3: init: 1] init: Function: selinux_compare_spd_ram, index[2], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2959[ 4.107781] [3: init: 1] init: SELinux: Loaded property_contexts from /property_contexts. 2960[ 4.107871] [3: init: 1] init: Function: selinux_compare_spd_ram, index[6], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 2961[ 4.110051] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_config_va_mode 2962[ 4.112379] [2: init: 1] init: Starting service 'vold'... 2963[ 4.113387] [2: init: 1] init: Not bootcharting. 2964[ 4.145573] [2: init: 1] init: do_restorecon: Could not access /carrier 2965[ 4.151800] [2: init: 1] init: SELinux: set fc_digest(/data) 2966[ 4.152758] [2: init: 1] init: Starting service 'exec 0 (/system/bin/tzdatacheck)'... 2967[ 4.160073] [0:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_wakeup_set 2968[ 4.161880] [2: init: 1] init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 593) exited with status 0 2969[ 4.165639] [2: init: 1] init: Starting service 'macloader'... 2970[ 4.179198] [3: sh: 595] macloader: macloader triggered 2971[ 4.183835] [3: sh: 596] macloader: Not yet wlan interface loaded 2972[ 4.185803] [2: init: 1] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}' 2973[ 4.185876] [2: init: 1] init: cannot expand '${persist.sys.ssr.enable_debug}' while writing to '/sys/module/subsystem_restart/parameters/enable_debug' 2974[ 4.185958] [2: init: 1] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}' 2975[ 4.186029] [2: init: 1] init: cannot expand '${persist.sys.mba_boot_timeout}' while writing to '/sys/module/pil_msa/parameters/pbl_mba_boot_timeout_ms' 2976[ 4.186111] [2: init: 1] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}' 2977[ 4.186184] [2: init: 1] init: cannot expand '${persist.sys.modem_auth_timeout}' while writing to '/sys/module/pil_msa/parameters/modem_auth_timeout_ms' 2978[ 4.186265] [2: init: 1] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}' 2979[ 4.186333] [2: init: 1] init: cannot expand '${persist.sys.pil_proxy_timeout}' while writing to '/sys/module/peripheral_loader/parameters/proxy_timeout_ms' 2980[ 4.192071] [3: init: 1] subsys-pil-tz 9300000.qcom,lpass: adsp: loading from 0x000000008f400000 to 0x0000000091500000 2981[ 4.220104] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_backlog_len: history 0x1 2982[ 4.222773] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_pcm_rate: set pcm rate: 16000 2983[ 4.225399] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_update_microphone_mode: mode: 0 2984[ 4.229248] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_read_fw_vad_settings: FW Vad is set to 0x00000001 2985[ 4.231755] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_pcm_streaming_mode: PCM Streaming mode: 1, Reg 0x23: (0x00001021) 2986[ 4.231847] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_config_va_mode: VA firmware 0x25ad ready 2987[ 4.231915] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_mode: new requested mode: 0 (IDLE) 2988[ 4.250455] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: would move BOOTING -> FALLING_ASLEEP (00 -> 02) 2989[ 4.250540] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: has moved BOOTING -> FALLING_ASLEEP (00 -> 02) 2990[ 4.250628] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 0 2991[ 4.250699] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: would move FALLING_ASLEEP -> ACTIVE (02 -> 01) 2992[ 4.250773] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: has moved FALLING_ASLEEP -> ACTIVE (02 -> 01) 2993[ 4.250844] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: would move ACTIVE -> FALLING_ASLEEP (01 -> 02) 2994[ 4.250916] [1:dbmdx probe thr: 396] dbmdx-codec soc:dbmdx: dbmdx_set_power_mode: has moved ACTIVE -> FALLING_ASLEEP (01 -> 02) 2995[ 4.450113] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_delayed_pm_work_hibernate 2996[ 4.450165] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_update_microphone_mode: mode: 5 2997[ 4.451896] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_wakeup_release 2998[ 4.451954] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_set_mode: new requested mode: 6 (HIBERNATE) 2999[ 4.452844] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_set_mode: Successfull mode transition from 0 to mode is 6 3000[ 4.480058] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_wakeup_release 3001[ 4.480120] [1: kworker/1:1: 70] dbmdx-codec soc:dbmdx: dbmdx_delayed_pm_work_hibernate: current power mode: SLEEPING 3002[ 4.538661] [3: init: 1] subsys-pil-tz 9300000.qcom,lpass: adsp: Brought out of reset 3003[ 4.547851] [0: kworker/u8:0: 6] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3004[ 4.548357] [0: kworker/u8:0: 6] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3005[ 4.548439] [0: kworker/u8:0: 6] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3006[ 4.548874] [0: kworker/u8:0: 6] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 3007[ 4.549154] [0: kworker/u8:0: 6] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 3008[ 4.551117] [0: kworker/u8:0: 6] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 3009[ 4.551235] [0: kworker/u8:0: 6] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3010[ 4.551468] [0: kworker/u8:0: 6] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 3011[ 4.555708] [0: kworker/u8:0: 6] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3012[ 4.556257] [1: kworker/u8:0: 6] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3013[ 4.556669] [1: kworker/u8:0: 6] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3014[ 4.557107] [1: kworker/u8:0: 6] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 3015[ 4.557398] [1: kworker/u8:0: 6] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 3016[ 4.559279] [1: kworker/u8:0: 6] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 3017[ 4.559395] [1: kworker/u8:0: 6] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3018[ 4.559629] [1: kworker/u8:0: 6] platform soc:qcom,msm-audio-ion: Driver msm-audio-ion requests probe deferral 3019[ 4.559883] [3: irq/585-adsp: 383] subsys-pil-tz 9300000.qcom,lpass: adsp: Power/Clock ready interrupt received 3020[ 4.559931] I[0: swapper/0: 0] subsys-pil-tz 9300000.qcom,lpass: Subsystem error monitoring/handling services are up 3021[ 4.560057] [3: irq/585-adsp: 383] L-Notify: Generel: 7 3022[ 4.560207] [0: init: 1] sysmon_send_event_no_qmi: Message sending failed -19 3023[ 4.561127] [2: init: 1] subsys-pil-tz 1c00000.qcom,ssc: slpi: loading from 0x0000000091500000 to 0x0000000091f00000 3024[ 4.570585] [0: kworker/0:1: 43] apr_tal:Q6 Is Up 3025[ 4.571376] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3026[ 4.571848] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3027[ 4.571935] [1: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3028[ 4.572377] [1: kworker/u8:2: 50] platform soc:qcom,msm-voip-dsp: Driver msm-voip-dsp requests probe deferral 3029[ 4.572653] [1: kworker/u8:2: 50] platform soc:qcom,msm-pcm-voice: Driver msm-pcm-voice requests probe deferral 3030[ 4.574537] [1: kworker/u8:2: 50] msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered 3031[ 4.574651] [1: kworker/u8:2: 50] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3032[ 4.575953] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3033[ 4.576422] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3034[ 4.576505] [1: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3035[ 4.580143] [2: kworker/u8:2: 50] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered 3036[ 4.580258] [2: kworker/u8:2: 50] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3037[ 4.580720] [2: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3038[ 4.581093] [2: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3039[ 4.581162] [2: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3040[ 4.667886] [0: kworker/u8:0: 6] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service 3041[ 4.668524] [0: kworker/u8:7: 324] diag: Control packet 12 not supported 3042[ 4.669074] [0: kworker/u8:7: 324] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, ffffffc001e8eda0 3043[ 4.675943] [0: kworker/0:1: 43] sps:BAM 0x0000000009184000 (va:0xffffff8006180000) enabled: ver:0x19, number of pipes:31 3044[ 4.676007] [0: ngd_notify_sl1: 409] sps:BAM 0x0000000009184000 is registered. 3045[ 4.678208] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Platform data from device tree 3046[ 4.678321] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: cdc-vdd-buck: vol=[1800000 1800000]uV, curr=[650000]uA, ond 0 3047[ 4.678391] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: cdc-buck-sido: vol=[1800000 1800000]uV, curr=[250000]uA, ond 0 3048[ 4.678459] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: cdc-vdd-tx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0 3049[ 4.678526] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: cdc-vdd-rx-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0 3050[ 4.678591] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: cdc-vddpx-1: vol=[1800000 1800000]uV, curr=[10000]uA, ond 0 3051[ 4.678650] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-ldoh-v property in node /soc/slim@91c0000/tasha_codec failed 3052[ 4.678718] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt1-mv property in node /soc/slim@91c0000/tasha_codec failed 3053[ 4.678788] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt2-mv property in node /soc/slim@91c0000/tasha_codec failed 3054[ 4.678858] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias-cfilt3-mv property in node /soc/slim@91c0000/tasha_codec failed 3055[ 4.678930] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias1-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 3056[ 4.679001] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias2-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 3057[ 4.679072] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias3-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 3058[ 4.679140] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@91c0000/tasha_codec failed 3059[ 4.679290] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_probe: codec type is 2 3060[ 4.679686] [0: ngd_notify_sl1: 409] tasha-slim-pgd supply cdc-s4-mode not found, using dummy regulator 3061[ 4.679775] [0: ngd_notify_sl1: 409] rpm_regulator_get: regulator structure not found. 3062[ 4.679852] [0: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: s4 auto power mode 3063[ 4.681189] [2: init: 1] wcd9xxx_reset : use pinctrl true 3064[ 4.682962] [2: init: 1] subsys-pil-tz 1c00000.qcom,ssc: slpi: Brought out of reset 3065[ 4.727271] [1: kworker/u8:2: 50] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered 3066[ 4.727389] [1: kworker/u8:2: 50] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3067[ 4.727771] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3068[ 4.728282] [1: kworker/u8:2: 50] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3069[ 4.728361] [1: kworker/u8:2: 50] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3070[ 4.735384] [3: vold: 592] random: vold urandom read with 44 bits of entropy available 3071[ 4.735715] [0: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: ASoC: CODEC DAI tasha_vifeedback not registered 3072[ 4.735835] [0: kworker/u8:4: 321] platform soc:sound-9335: Driver msm8996-asoc-snd requests probe deferral 3073[ 4.736269] [0: kworker/u8:4: 321] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3074[ 4.736665] [0: kworker/u8:4: 321] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: Defering DBMDX SND card probe, wait primary card... 3075[ 4.736806] [0: kworker/u8:4: 321] platform soc:snd-dbmdx-mach-drv: Driver snd-dbmdx-mach-drv requests probe deferral 3076[ 4.738729] [0: kworker/u8:0: 6] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and slpi's SSCTL service 3077[ 4.738835] [2: irq/617-slpi: 388] subsys-pil-tz 1c00000.qcom,ssc: slpi: Power/Clock ready interrupt received 3078[ 4.738885] I[0: kworker/u8:0: 6] subsys-pil-tz 1c00000.qcom,ssc: Subsystem error monitoring/handling services are up 3079[ 4.740124] [1: ngd_notify_sl1: 409] wcd9xxx_reset : reset gpio value high 3080[ 4.740466] [2: kworker/u8:8: 577] slimbus:1 laddr:0xcb, EAPC:0x1:0xa0 3081[ 4.740527] [2: kworker/u8:8: 577] wcd9335-slim tasha-slim-pgd: wcd9xxx_slim_device_up: slim device up 3082[ 4.740799] [2: ngd_notify_sl1: 409] slimbus:1 laddr:0xca, EAPC:0x0:0xa0 3083[ 4.741187] [2: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: wcd9335_bring_up: wcd9335 codec version is v2.0 3084[ 4.741388] [0: kworker/u8:0: 6] diag: In diag_send_feature_mask_update, control channel is not open, p: 3, ffffffc001e8eed0 3085[ 4.741444] [1: kworker/u8:4: 321] diag: Control packet 12 not supported 3086[ 4.741511] [2: init: 1] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_do: SLPI image is loaded 3087[ 4.741816] [2: init: 1] init: Starting service 'exec 1 (/init.qcom.early_boot.sh)'... 3088[ 4.746208] [2: ngd_notify_sl1: 409] wcd9335-slim tasha-slim-pgd: wcd9xxx_check_codec_type: detected tasha_codec, major 0x107, minor 0x1, ver 0x2 3089[ 4.746276] [2: ngd_notify_sl1: 409] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4 3090[ 4.752044] [1: kworker/u8:4: 321] tasha_codec tasha_codec: tasha_codec_probe() 3091[ 4.759929] [1: kworker/u8:0: 6] max77854_fg_read_vcell: VCELL(4246), data(0xd44e) 3092[ 4.779427] [1: kworker/u8:4: 321] wcd_mbhc_init: enter 3093[ 4.779735] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: det-zones-list 2, 0, 2 3094[ 4.779904] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: det-zones-list 2, 690, 2 3095[ 4.780530] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: det-zones-list 2, 691, 1 3096[ 4.780835] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: det-zones-list 2, 9999, 1 3097[ 4.784476] [1: kworker/u8:4: 321] wcd_mbhc_init: leave ret 0 3098[ 4.784524] [1: kworker/u8:4: 321] tasha_codec tasha_codec: dbmdx_remote_add_codec_controls start 3099[ 4.819077] [3: kworker/u8:4: 321] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX 3100[ 4.819137] [3: kworker/u8:4: 321] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX 3101[ 4.821640] [2: init: 1] init: property_set("ro.sf.lcd_density", "480") failed 3102[ 4.853100] [1: kworker/u8:4: 321] max98506 18-0031: build number 0.00.0010 3103[ 4.853807] [1: kworker/u8:4: 321] max98506_check_version REV ID:0x80 3104[ 4.853844] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_probe: device version 0x80 3105[ 4.860903] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_set_slave: enter 3106[ 4.862892] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_handle_pdata: [0x1f, 0x00] 3107[ 4.863420] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_handle_pdata: [0x21, 0xc0] 3108[ 4.863976] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_handle_pdata: [0x2f, 0x00] 3109[ 4.864894] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_probe: g_class=ffffffc0f55f4f00 ffffffc0f55f4f00 3110[ 4.864957] [1: kworker/u8:4: 321] [MAX98506_DEBUG] max98506_probe: exit 0 3111[ 4.880486] [1: kworker/u8:4: 321] msm_audrx_init: dev_namesoc:qcom,msm-dai-q6:qcom,msm-dai-q6-sb-0-rx 3112[ 4.884671] [1: kworker/u8:4: 321] wcd_mbhc_start: enter 3113[ 4.884718] [1: kworker/u8:4: 321] wcd_mbhc_set_keycode: set btn0 key code:226 3114[ 4.884759] [1: kworker/u8:4: 321] wcd_mbhc_set_keycode: set btn1 key code:582 3115[ 4.884798] [1: kworker/u8:4: 321] wcd_mbhc_set_keycode: set btn2 key code:115 3116[ 4.884844] [1: kworker/u8:4: 321] wcd_mbhc_set_keycode: set btn3 key code:114 3117[ 4.884884] [1: kworker/u8:4: 321] wcd_mbhc_initialise: enter 3118[ 4.884919] [1: kworker/u8:4: 321] wcd_mbhc_initialise: Acquiring BCL 3119[ 4.884961] [1: kworker/u8:4: 321] wcd_mbhc_initialise: Acquiring BCL done 3120[ 4.886714] [1: kworker/u8:4: 321] tasha_codec tasha_codec: wcd_program_hs_vref: reg_val = 2 3121[ 4.900363] [1: kworker/u8:4: 321] wcd_mbhc_initialise: Release BCL 3122[ 4.900411] [1: kworker/u8:4: 321] wcd_mbhc_initialise: leave 3123[ 4.900448] [1: kworker/u8:4: 321] wcd_mbhc_start: leave 0 3124[ 4.912951] [2: init: 1] init: property_set("ro.vold.forceencryption", "1") failed 3125[ 4.920899] [2: init: 1] init: property_set("ro.vold.forceencryption", "1") failed 3126[ 4.922386] [1: kworker/u8:4: 321] input: msm8996-tasha-snd-card Headset Jack as /devices/soc/soc:sound-9335/sound/card0/input9 3127[ 4.922616] [1: kworker/u8:4: 321] input: msm8996-tasha-snd-card Button Jack as /devices/soc/soc:sound-9335/sound/card0/input10 3128[ 4.922745] [1: kworker/u8:4: 321] keychord: using input dev msm8996-tasha-snd-card Button Jack for fevent 3129[ 4.924105] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: Sound card msm8996-tasha-snd-card registered 3130[ 4.924174] [1: kworker/u8:4: 321] msm8996-asoc-snd soc:sound-9335: property qcom,us-euro-gpios not detected in node /soc/sound-9335 3131[ 4.924548] [1: kworker/u8:4: 321] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: 3132[ 4.925078] [1: kworker/u8:4: 321] dbmdx-codec soc:dbmdx: dbmdx_dev_probe 3133[ 4.925170] [1: kworker/u8:4: 321] dbmdx_pcm_probe 3134[ 4.925272] [1: kworker/u8:4: 321] dbmdx_pcm_new 3135[ 4.925304] [1: kworker/u8:4: 321] dbmdx_pcm_preallocate_dma_buffer 3136[ 4.930667] [1: kworker/u8:2: 50] dbmdx-codec soc:dbmdx: dbmdx_set_bias_level: level 1 3137[ 4.930723] [1: kworker/u8:2: 50] dbmdx-codec soc:dbmdx: dbmdx_set_bias_level: level 2 3138[ 4.930805] [1: kworker/u8:2: 50] dbmdx-codec soc:dbmdx: dbmdx_set_bias_level: level 3 3139[ 4.930879] [0: kworker/u8:0: 6] [FG] 0080h,ffa3h,7f80h,ff01h,1900h,15beh,60d3h,5cadh,1b00h,d44eh,f93eh,f98fh,0046h,648ch,60cdh,15bfh,158fh,1afbh,2a00h,5d00h,01f4h,0148h,1976h,02afh,173bh,d4a0h,290dh,da96h,46ach,0314h,0500h,157ah,ffffh,20c0h,1400h,158ch,1403h,2305h,1976h,7f8eh,2473h,cea4h,2039h,09d0h,e3e1h,290eh,0400h,0001h,212ch,43d7h,0900h,ffffh,1de6h,1675h,123ch,05e0h,007eh,3639h,7d54h,f98fh,1680h,1408h,750ch,e000h,78b4h,a8e6h,0800h,0000h,d5e3h,061dh,38bch,0104h,6445h,2241h,1587h,0000h,0f11h,0ef6h,a0aah,15d5h,0000h,0000h,7f80h,0000h,7f80h,0005h,00bah,0954h,0000h,006bh,090ch,0050h,0afah,0204h,0779h,0002h,0000h,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0012h,ffffh,60d0h,15adh,031ch,1310h,c500h,5840h,0000h,0000h,0c7bh,fffeh,4c40h,fff8h,4200h,0000h,4000h,0000h,7d00h,0308h,0000h,0000h,0000h,0000h,2433h,0000h,0000h,f9e5h,3fc7h,5840h,f97bh,d78ch,0072h,2910h,d238h,6388h, 3140[ 4.931216] [1: kworker/u8:4: 321] snd-dbmdx-mach-drv soc:snd-dbmdx-mach-drv: dbmdx_snd_probe: DBMDX ASoC card registered 3141[ 4.965396] [0: kworker/u8:0: 6] sec_bat_get_property cable type = 4 sleep_mode = 0 3142[ 4.967027] [0: kworker/u8:0: 6] max77854_fg_get_scaled_capacity : current_standard(1000) 3143[ 4.967079] [0: kworker/u8:0: 6] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (1000) scaled capacity(96.8), raw_soc(96.8) 3144[ 4.967175] [0: kworker/u8:0: 6] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4246mV),Inow(-718mA),Imax(500mA),SOC(96%),Tbat(270),Tchg(330),Twpc(330),sw_self_dis(0) 3145[ 4.968056] [0: kworker/u8:0: 6] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 420 sec, passed time: 0 3146[ 4.970524] [0: kworker/u8:0: 6] max77854_get_charging_health: reg_data(0x3) 3147[ 4.971394] [0: kworker/u8:0: 6] sec_bat_get_property cable type = 4 sleep_mode = 0 3148[ 4.971443] [0: kworker/u8:0: 6] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 3149[ 4.973087] [0: kworker/u8:0: 6] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 3150[ 4.988130] [0: kworker/u8:0: 6] MAX77854 : [0xb1]0x5e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 3151[ 4.988258] [0: kworker/u8:0: 6] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%), HV(NONE), sleep_mode(0), Cycle(-1) 3152[ 4.988334] [2: init: 1] init: Service 'exec 1 (/init.qcom.early_boot.sh)' (pid 614) exited with status 0 3153[ 4.988461] [0: kworker/0:1: 43] sec_bat_get_property cable type = 4 sleep_mode = 0 3154[ 4.998843] [2: init: 1] [sec_input] volume_up wakeup status 0 3155[ 4.998885] [2: init: 1] [sec_input] home_key wakeup status 1 3156[ 4.999127] [2: init: 1] init: write_file: Unable to open '/sys/block/mmcblk0/queue/scheduler': No such file or directory 3157[ 4.999414] [2: init: 1] init: cannot find '/system/bin/sysmon', disabling 'sysmon' 3158[ 4.999473] [2: init: 1] init: Starting service 'healthd'... 3159[ 5.000248] [2: init: 1] init: Starting service 'prepare_param'... 3160[ 5.001131] [2: init: 1] init: Starting service 'lmkd'... 3161[ 5.001978] [2: init: 1] init: Starting service 'servicemanager'... 3162[ 5.002842] [2: init: 1] init: Starting service 'surfaceflinger'... 3163[ 5.003502] [2: init: 1] init: Starting service 'qcom-c_core-sh'... 3164[ 5.004397] [2: init: 1] init: Starting service 'irsc_util'... 3165[ 5.004719] [0: healthd: 645] binder: 645:645 transaction failed 29189, size 0-0 3166[ 5.005190] [2: init: 1] init: Starting service 'rmt_storage'... 3167[ 5.005670] [2: init: 1] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access' 3168[ 5.005848] [2: init: 1] init: Starting service 'sensor-sh'... 3169[ 5.006412] [2: init: 1] init: Starting service 'cs-early-boot'... 3170[ 5.007006] [2: init: 1] init: Starting service 'qcom-usb-sh'... 3171[ 5.007779] [2: init: 1] init: Starting service 'per_mgr'... 3172[ 5.008578] [2: init: 1] init: Starting service 'qseecomd'... 3173[ 5.009067] [2: init: 1] init: Starting service 'swapon'... 3174[ 5.025731] [2: sswap: 658] Adding 2097148k swap on /dev/block/vnswap0. Priority:-1 extents:1 across:2097148k SSFS 3175[ 5.032647] [2: init: 1] init: Service 'irsc_util' (pid 651) exited with status 0 3176[ 5.033192] [2: init: 1] init: Service 'swapon' (pid 658) exited with status 0 3177[ 5.039013] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory 3178[ 5.039100] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory 3179[ 5.039179] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory 3180[ 5.039259] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory 3181[ 5.039336] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory 3182[ 5.039413] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory 3183[ 5.039487] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory 3184[ 5.039561] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory 3185[ 5.039652] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory 3186[ 5.039733] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory 3187[ 5.039815] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory 3188[ 5.039890] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory 3189[ 5.039969] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory 3190[ 5.051811] [3: kworker/u8:4: 321] max77854_chgin_init_work 3191[ 5.058027] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory 3192[ 5.058646] [2: init: 1] init: Service 'cs-early-boot' (pid 654) exited with status 127 3193[ 5.059064] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory 3194[ 5.059165] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory 3195[ 5.059246] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory 3196[ 5.059325] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory 3197[ 5.059405] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory 3198[ 5.059495] [2: init: 1] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory 3199[ 5.059669] [2: init: 1] init: cannot find '/system/bin/rfs_access', disabling 'rfs_access' 3200[ 5.059828] [2: init: 1] init: write_file: Unable to open '/sys/devices/soc/75ba000.i2c/i2c-12/12-0020/input/input0/update_fw': No such file or directory 3201[ 5.070301] [2: init: 1] init: Starting service 'defaultcrypto'... 3202[ 5.091258] [1: kworker/u8:4: 321] sec_battery_update_data: error!!! (ret = -2) 3203[ 5.093438] [1: init: 1] init: Starting service 'secure_storage'... 3204[ 5.094420] [1: init: 1] init: Starting service 'per_proxy'... 3205[ 5.095201] [1: init: 1] enable_store: android_usb: already disabled 3206[ 5.095473] [1: init: 1] usb: enable_store f_holder->f:mtp 3207[ 5.095512] [1: init: 1] usb: enable_store f_holder->f:acm 3208[ 5.095547] [1: init: 1] usb: acm is enabled. (bcdDevice=0x400) 3209[ 5.095587] [1: init: 1] [mtpg_function_bind] line = [1368] 3210[ 5.095670] [1: init: 1] super speed mtp: IN/ep1in, OUT/ep1out 3211[ 5.095853] [1: init: 1] DUN is registerd 3212[ 5.095887] [1: init: 1] usb: dwc3_gadget_pullup is_on: 1 3213[ 5.095931] [1: init: 1] usb: dwc3_gadget_run_stop is_on:1 3214[ 5.116628] [1: init: 1] init: property_set("ro.vold.forceencryption", "1") failed 3215[ 5.129119] [2: vold: 638] QSEECOM: qseecom_load_app: App (tz_iccc) does'nt exist, loading apps for first time 3216[ 5.131327] [1: qseecomd: 657] capability: warning: `qseecomd' uses 32-bit capabilities (legacy support in use) 3217[ 5.142363] [0: Binder_1: 675] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem 3218[ 5.148264] [0: Binder_1: 675] IPA received MPSS BEFORE_POWERUP 3219[ 5.149949] [0: Binder_1: 675] ipa ipa_uc_state_check:296 uC is not loaded 3220[ 5.150011] [0: Binder_1: 675] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 3221[ 5.153520] [2: init: 1] init: Service 'qcom-c_core-sh' (pid 650) exited with status 0 3222[ 5.155241] [1: vold: 638] QSEECOM: qseecom_load_app: App with id 6 (tz_iccc) now loaded 3223[ 5.156079] [2: Binder_1: 675] IPA BEFORE_POWERUP handling is complete 3224[ 5.157054] [1: qseecomd: 696] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 12288 / pid: 696 3225[ 5.157147] [2: qseecomd: 695] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 8192 / pid: 695 3226[ 5.162712] [1: vold: 638] QSEECOM: qseecom_unload_app: App id 6 now unloaded 3227[ 5.163596] [2: Binder_1: 675] pil-q6v5-mss 2080000.qcom,mss: modem: loading from 0x0000000088800000 to 0x000000008f400000 3228[ 5.164092] [1: qseecomd: 699] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 16384 / pid: 699 3229[ 5.166746] [2: qseecomd: 701] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 10 / pid: 701 3230[ 5.167146] [3: qseecomd: 700] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 11 / pid: 700 3231[ 5.172761] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 28672 / pid: 704 3232[ 5.180494] [2: ueventd: 707] firmware msadp: firmware_loading_store: map pages failed 3233[ 5.181062] [1: Binder_1: 675] pil-q6v5-mss 2080000.qcom,mss: Debug policy not present - msadp. Continue. 3234[ 5.191474] [0: qseecomd: 706] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 36864 / pid: 706 3235[ 5.191662] [1: Binder_1: 675] pil-q6v5-mss 2080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000f7c00000 to 0x00000000f7d00000 3236[ 5.195008] [3: sh: 710] macloader: Not yet wlan interface loaded 3237[ 5.195628] [3: qseecomd: 713] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 4352 / pid: 713 3238[ 5.197483] I[0: start: 712] usb:: dwc3_gadget_reset_interrupt 3239[ 5.198054] [1: init: 1] init: Starting service 'cs_service'... 3240[ 5.199236] [1: init: 1] init: Starting service 'insthk'... 3241[ 5.200950] [1: init: 1] init: Starting service 'tbaseLoader'... 3242[ 5.205178] [1: init: 1] init: Starting service 'sensors'... 3243[ 5.222368] [0: init: 1] init: Starting service 'factory_adsp'... 3244[ 5.224664] [0: init: 1] init: Service 'sensor-sh' (pid 653) exited with status 0 3245[ 5.252233] I[0:secure_storage_: 677] usb:: dwc3_gadget_conndone_interrupt (HS) 3246[ 5.254913] [1: surfaceflinger: 649] kgsl: _read_fw2_block_header: GPMU unknown header ID 6 3247[ 5.257049] [1: init: 1] init: Service 'qcom-usb-sh' (pid 655) exited with status 0 3248[ 5.259688] [1: surfaceflinger: 649] cpr3_regulator_measure_aging: gfx: average quotient delta=-16 (count=10) 3249[ 5.259761] [1: surfaceflinger: 649] cpr3_regulator_aging_adjust: gfx: aging measurement successful; aging reference adjustment voltage=0 uV 3250[ 5.266030] I[0: kworker/u8:3: 51] usb: count_multi_config ready multi 3251[ 5.266071] I[0: kworker/u8:3: 51] usb:: GET_DES 3252[ 5.266664] [2: Binder_1: 675] pil-q6v5-mss 2080000.qcom,mss: MBA boot done 3253[ 5.266754] [0: kworker/0:1: 43] android_work: android_work: sent uevent USB_STATE=CONNECTED 3254[ 5.269859] I[0: surfaceflinger: 649] usb: set_config_number multi config_num=0(zero base) 3255[ 5.269910] I[0: surfaceflinger: 649] usb: set_interface_count next_interface_id=1 3256[ 5.270302] I[0: surfaceflinger: 649] usb: set_config_number multi config_num=0(zero base) 3257[ 5.270354] I[0: surfaceflinger: 649] usb: set_interface_count next_interface_id=1 3258[ 5.270669] I[0: surfaceflinger: 649] usb: set_config_number multi config_num=1(zero base) 3259[ 5.270714] I[0: surfaceflinger: 649] usb: set_interface_count next_interface_id=3 3260[ 5.270964] I[0: surfaceflinger: 649] usb: set_config_number multi config_num=1(zero base) 3261[ 5.271015] I[0: surfaceflinger: 649] usb: set_interface_count next_interface_id=3 3262[ 5.275020] [1: init: 1] init: Starting service 'run-mobicore'... 3263[ 5.275817] [1: init: 1] init: Service 'tbaseLoader' (pid 717) exited with status 0 3264[ 5.278305] [1: qseecomd: 696] QSEECOM: qseecom_receive_req: After wait_event listener_id: 12288 / pid: 696 3265[ 5.278742] [1: qseecomd: 696] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 12288 / pid: 696 3266[ 5.288208] [1: surfaceflinger: 649] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: loading from 0x0000000091f00000 to 0x0000000091f02000 3267[ 5.334889] I[0:secure_storage_: 677] usb:: SET_CON 3268[ 5.334929] I[0:secure_storage_: 677] android_usb gadget: high-speed config #2: 66bf0c8.android_usb 3269[ 5.335082] I[0:secure_storage_: 677] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500 3270[ 5.335139] I[0:secure_storage_: 677] dwc3 6a00000.dwc3: ep5In not enabled 3271[ 5.335177] I[0:secure_storage_: 677] dwc3 6a00000.dwc3: ep6In not enabled 3272[ 5.335373] [0: kworker/0:2: 569] android_work: android_work: sent uevent USB_STATE=CONFIGURED 3273[ 5.384438] [3: vold: 638] QSEECOM: __qseecom_process_incomplete_cmd: fail:resp res= -65,app_id = 0,lstr = 12288 3274[ 5.384497] [3: vold: 638] get_ice_device_from_storage_type: found ice device ffffffc0f7aea600 3275[ 5.457652] [3: vold: 638] get_ice_device_from_storage_type: found ice device ffffffc0f7aea600 3276[ 5.458120] [3: kworker/3:1: 33] Trustonic TEE: *** <t MTK, Build: Dec 10 2015, 09:50:42 *** 3277[ 5.458163] [1: vold: 638] QSEECOM: qseecom_create_key: Set the key successfully 3278[ 5.458211] [3: kworker/3:1: 33] Trustonic TEE: t-base-QC-MSM8996-Android-310A-V006-20151210_094535_2333 3279[ 5.461906] [0: vold: 638] device-mapper: req-crypt: req_crypt_ctr: Apply ICE key index : 0 3280[ 5.461906] [0: vold: 638] 3281[ 5.473973] [2: cryptomgr_test: 749] FIPS: No test for qcom-xts(aes) (qcrypto-xts-aes) 3282[ 5.475848] [2: vold: 638] device-mapper: req-crypt: req_crypt_ctr: Mapping block_device /dev/block/bootdevice/by-name/userdata to dm-req-crypt ok! 3283[ 5.475848] [2: vold: 638] 3284[ 5.476495] [3: vold: 638] device-mapper: table: 254:1: adding target device sda22 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 3285[ 5.476584] [3: vold: 638] device-mapper: table: 254:1: adding target device sda22 caused an alignment inconsistency: physical_block_size=16384, logical_block_size=4096, alignment_offset=0, start=0 3286[ 5.493176] [3: insthk: 715] QSEECOM: qseecom_load_app: App (sshdcpap) does'nt exist, loading apps for first time 3287[ 5.511130] [3: insthk: 715] QSEECOM: qseecom_load_app: App with id 7 (sshdcpap) now loaded 3288[ 5.515048] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: After wait_event listener_id: 28672 / pid: 704 3289[ 5.515351] [1: surfaceflinger: 649] subsys-pil-tz soc:qcom,kgsl-hyp: a530_zap: Brought out of reset 3290[ 5.515803] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 28672 / pid: 704 3291[ 5.518984] [1: kworker/u8:2: 50] devfreq soc:qcom,kgsl-busmon: Couldn't update frequency transition information. 3292[ 5.542519] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: After wait_event listener_id: 28672 / pid: 704 3293[ 5.548880] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 28672 / pid: 704 3294[ 5.550738] [0: qseecomd: 704] QSEECOM: qseecom_receive_req: After wait_event listener_id: 28672 / pid: 704 3295[ 5.551419] [2: qseecomd: 704] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 28672 / pid: 704 3296[ 5.553137] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: After wait_event listener_id: 28672 / pid: 704 3297[ 5.553245] [3: qseecomd: 704] QSEECOM: qseecom_receive_req: Before wait_event listener_id: 28672 / pid: 704 3298[ 5.558723] [0: cs: 714] QSEECOM: qseecom_load_app: App (skm) does'nt exist, loading apps for first time 3299[ 5.586658] [3: cs: 714] QSEECOM: qseecom_load_app: App with id 8 (skm) now loaded 3300[ 5.587369] [2: insthk: 715] QSEECOM: qseecom_unload_app: App id 7 now unloaded 3301[ 5.592880] [1: surfaceflinger: 649] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++ on=0 3302[ 5.593501] [3: surfaceflinger: 649] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK -- 3303[ 5.598349] [3: init: 1] init: Service 'insthk' (pid 715) exited with status 0 3304[ 5.647173] [1: init: 1] init: Starting service 'bootanim'... 3305[ 5.647957] [1: init: 1] init: write_file: Unable to open '/sys/class/leds/wled/brightness': No such file or directory 3306[ 5.649675] [0: surfaceflinger: 649] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++ on=1 3307[ 5.649739] [0: surfaceflinger: 649] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK -- 3308[ 5.649778] [3: init: 1] init: Starting service 'powersnd'... 3309[ 5.657509] [1: mcDriverDaemon: 735] Trustonic TEE: mobicore_start: 3310[ 5.657509] [1: mcDriverDaemon: 735] product_id = t-base-QC-MSM8996-Android-310A-V006-20151210_094535_2333 3311[ 5.657509] [1: mcDriverDaemon: 735] version_mci = 0x00010004 3312[ 5.657509] [1: mcDriverDaemon: 735] version_so = 0x00020002 3313[ 5.657509] [1: mcDriverDaemon: 735] version_mclf = 0x00020005 3314[ 5.657509] [1: mcDriverDaemon: 735] version_container = 0x00020001 3315[ 5.657509] [1: mcDriverDaemon: 735] version_mc_config = 0x00000002 3316[ 5.657509] [1: mcDriverDaemon: 735] version_tl_api = 0x00010012 3317[ 5.657509] [1: mcDriverDaemon: 735] version_dr_api = 0x00010003 3318[ 5.657509] [1: mcDriverDaemon: 735] version_nwd = 0x00020001 3319[ 5.657942] [1: mcDriverDaemon: 735] Trustonic TEE: mobicore_start: SWd uses LPAE MMU table format 3320[ 5.658118] [2: cs: 714] QSEECOM: qseecom_unload_app: App id 8 now unloaded 3321[ 5.658171] [1: mcDriverDaemon: 735] Trustonic TEE: admin_open: admin connection open, PID 735 3322[ 5.782128] [1: kworker/1:1: 70] Trustonic TEE: 401|TA SPT2 : Starting. 3323[ 5.782185] [1: kworker/1:1: 70] Trustonic TEE: 401|TA SPT2 : tbase info. 3324[ 5.782228] [1: kworker/1:1: 70] Trustonic TEE: 401|tlApi version = 0x00010012 3325[ 5.782275] [1: kworker/1:1: 70] Trustonic TEE: 401|productId = t-base-QC-MSM8996-Android-310A-V006-20151210_094535_2333 3326[ 5.782345] [1: kworker/1:1: 70] Trustonic TEE: 401|versionMci = 0x00010004 3327[ 5.784791] [1: kworker/1:1: 70] Trustonic TEE: 401|versionSo = 0x00020002 3328[ 5.784846] [1: kworker/1:1: 70] Trustonic TEE: 401|versionMclf = 0x00020005 3329[ 5.784894] [1: kworker/1:1: 70] Trustonic TEE: 401|versionContainer = 0x00020001 3330[ 5.784938] [1: kworker/1:1: 70] Trustonic TEE: 401|versionMcConfig = 0x00000002 3331[ 5.784982] [1: kworker/1:1: 70] Trustonic TEE: 401|versionTlApi = 0x00010012 3332[ 5.785025] [1: kworker/1:1: 70] Trustonic TEE: 401|versionDrApi = 0x00010003 3333[ 5.785066] [1: kworker/1:1: 70] Trustonic TEE: 401|versionCmp = 0x00000000 3334[ 5.891298] [0: vold: 638] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 3335[ 5.891298] [0: vold: 638] 3336[ 5.891407] [0: vold: 638] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. 3337[ 5.891407] [0: vold: 638] 3338[ 5.891493] [0: vold: 638] e2fsck: check whether gdt & bitmap free count is vaild 3339[ 5.891493] [0: vold: 638] 3340[ 5.891584] [0: vold: 638] e2fsck: superblock fsync before orphan cleanup! 3341[ 5.891584] [0: vold: 638] 3342[ 5.891664] [0: vold: 638] e2fsck: Clearing orphaned inode 131115 (uid=10023, gid=10023, mode=040771, size=4096) 3343[ 5.891664] [0: vold: 638] 3344[ 5.891756] [0: vold: 638] e2fsck: Clearing orphaned inode 131322 (uid=10023, gid=10023, mode=0100644, size=45736) 3345[ 5.891756] [0: vold: 638] 3346[ 5.891894] [0: vold: 638] e2fsck: Clearing orphaned inode 392115 (uid=10114, gid=10114, mode=0100600, size=0) 3347[ 5.891894] [0: vold: 638] 3348[ 5.891984] [0: vold: 638] e2fsck: Clearing orphaned inode 392090 (uid=10199, gid=10199, mode=0100600, size=0) 3349[ 5.891984] [0: vold: 638] 3350[ 5.892075] [0: vold: 638] e2fsck: Clearing orphaned inode 196962 (uid=10195, gid=10195, mode=0100600, size=0) 3351[ 5.892075] [0: vold: 638] 3352[ 5.892180] [0: vold: 638] e2fsck: flush all filesystem after orphan cleanup! 3353[ 5.892180] [0: vold: 638] 3354[ 5.892257] [0: vold: 638] e2fsck: ext2fs_write_bitmaps : do_inode = 1, do_block = 1 3355[ 5.892257] [0: vold: 638] 3356[ 5.892367] [0: vold: 638] e2fsck: superblock fsync after orphan cleanup! 3357[ 5.892367] [0: vold: 638] 3358[ 5.892438] [0: vold: 638] e2fsck: check whether gdt & bitmap free count is vaild after release orphan inode 3359[ 5.892438] [0: vold: 638] 3360[ 5.892526] [0: vold: 638] e2fsck: Pass 1: Checking inodes, blocks, and sizes 3361[ 5.892526] [0: vold: 638] 3362[ 5.892599] [0: vold: 638] e2fsck: Pass 2: Checking directory structure 3363[ 5.892599] [0: vold: 638] 3364[ 5.892674] [0: vold: 638] e2fsck: Pass 3: Checking directory connectivity 3365[ 5.892674] [0: vold: 638] 3366[ 5.892766] [0: vold: 638] e2fsck: Pass 4: Checking reference counts 3367[ 5.892766] [0: vold: 638] 3368[ 5.892866] [0: vold: 638] e2fsck: Pass 5: Checking group summary information 3369[ 5.892866] [0: vold: 638] 3370[ 5.892937] [0: vold: 638] e2fsck: 3371[ 5.892937] [0: vold: 638] 3372[ 5.892995] [0: vold: 638] e2fsck: /dev/block/dm-1: ***** FILE SYSTEM WAS MODIFIED ***** 3373[ 5.892995] [0: vold: 638] 3374[ 5.893077] [0: vold: 638] e2fsck: /dev/block/dm-1: 8384/775200 files (9.8% non-contiguous), 1417817/6194636 blocks 3375[ 5.893077] [0: vold: 638] 3376[ 5.893169] [0: vold: 638] e2fsck: ext2fs_close2 : normal operation, return 0 3377[ 5.893169] [0: vold: 638] 3378[ 5.893313] [0: vold: 638] e2fsck: e2fsck terminated by exit(1) 3379[ 5.893313] [0: vold: 638] 3380[ 5.906637] [0: vold: 638] fs_mgr: Running /system/bin/e2fsck on /dev/block/dm-1 3381[ 5.960865] [3: vold: 638] e2fsck: e2fsck 1.42.9 (28-Dec-2013) 3382[ 5.960865] [3: vold: 638] 3383[ 5.960943] [3: vold: 638] e2fsck: skipping journal recoverybecause INCOMPAT_RECOVER was clear. 3384[ 5.960943] [3: vold: 638] 3385[ 5.961013] [3: vold: 638] e2fsck: check whether gdt & bitmap free count is vaild 3386[ 5.961013] [3: vold: 638] 3387[ 5.961075] [3: vold: 638] e2fsck: /dev/block/dm-1: clean, 8384/775200 files, 1417817/6194636 blocks 3388[ 5.961075] [3: vold: 638] 3389[ 5.961144] [3: vold: 638] e2fsck: ext2fs_close2 : normal operation, return 0 3390[ 5.961144] [3: vold: 638] 3391[ 5.962172] [2: vold: 638] EXT4-fs (dm-1): bd reset count=0, time=, now=20160106023944 3392[ 5.963968] [2: vold: 638] Setting journal tag on volname[(null)] journal size 128 MB 3393[ 5.965337] [2: vold: 638] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,journal_async_commit,data=ordered,errors=panic,debug_bdinfo 3394[ 5.965464] [2: vold: 638] SELinux: initialized (dev dm-1, type ext4), uses xattr 3395[ 5.965687] [2: vold: 638] fs_mgr: __mount(source=/dev/block/dm-1,target=/data,type=ext4)=0 3396[ 5.971855] [2: BootAnimation: 936] !@BootAnimation : Could not open '/sys/bus/w1/devices/w1_bus_master1/w1_master_check_model' 3397[ 5.986116] [2: BootAnimation: 936] !@BootAnimation : [Encryption info]crypt_state = encrypted, crypt_input_window = 0, crypt_type = default 3398[ 6.010209] [1: kworker/1:1: 70] msm8996-pinctrl 1010000.pinctrl: not freeing pin 0 (GPIO_0) as part of deactivating group gpio0 - it is already used for some other setting 3399[ 6.010302] [1: kworker/1:1: 70] msm8996-pinctrl 1010000.pinctrl: not freeing pin 1 (GPIO_1) as part of deactivating group gpio1 - it is already used for some other setting 3400[ 6.010380] [1: kworker/1:1: 70] msm8996-pinctrl 1010000.pinctrl: not freeing pin 2 (GPIO_2) as part of deactivating group gpio2 - it is already used for some other setting 3401[ 6.010468] [1: kworker/1:1: 70] msm8996-pinctrl 1010000.pinctrl: not freeing pin 3 (GPIO_3) as part of deactivating group gpio3 - it is already used for some other setting 3402[ 6.013195] [3: healthd: 645] healthd: initial Capacity max: '979' 3403[ 6.013352] [3: healthd: 645] sec-battery soc:battery: sec_bat_store_attrs: BATT_CAPACITY_MAX(979), fg_reset(0) 3404[ 6.013408] [3: healthd: 645] max77854_fg_set_property: capacity_max changed, 1000 -> 979 3405[ 6.104107] [2: surfaceflinger: 649] GPMU pre powerlevel failed retrying... : 80000005 3406[ 6.105566] [2: surfaceflinger: 649] [MDSS_EVENT_BLANK] 3407[ 6.105604] [2: surfaceflinger: 649] mdss_dsi_blank+: ctrl=ffffffc0f687c018 ndx=0 power_state=0 3408[ 6.105657] [2: surfaceflinger: 649] mdss_dsi_panel_off: ctrl=ffffffc0f687c018 ndx=0 3409[ 6.105704] [2: surfaceflinger: 649] [MDSS] esd_irq_enable : ESD irq already disabled 3410[ 6.168058] [0: BootAnimation: 936] !@BootAnimation : createSurface RGB565 3411[ 6.199246] [3: kworker/u8:3: 51] [FG] 0080h,ffa3h,7f80h,ff01h,1900h,15beh,60d0h,5cadh,1b00h,cf0ah,d8dah,f7beh,0053h,6489h,60cdh,15bfh,1582h,1612h,2a00h,5d00h,01f4h,0148h,197ch,02afh,173bh,d48fh,290dh,da96h,46ach,0314h,0500h,156dh,ffffh,20c0h,1400h,158ch,1403h,2305h,197ch,8004h,2473h,cea4h,2039h,09d0h,e3e1h,290eh,0400h,0001h,2216h,45e1h,0900h,ffffh,1d70h,1675h,123ch,05e0h,007eh,3639h,7d54h,f7beh,1680h,1008h,7513h,e000h,78b4h,a8e6h,0800h,0000h,d5e3h,061dh,38bch,0101h,6445h,2241h,1587h,0000h,0f11h,0ef5h,faceh,15d5h,0000h,0000h,7f80h,0000h,7f80h,0005h,00bah,0954h,0000h,006bh,090ch,0050h,0bb8h,0204h,0779h,0002h,0000h,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0014h,ffffh,60d0h,15abh,1b5dh,fef7h,ed9dh,0004h,ed80h,0000h,15bfh,0002h,4c40h,fff8h,4200h,0000h,4000h,0000h,a760h,0308h,0000h,0000h,0000h,0000h,2451h,0000h,0100h,f381h,4002h,5800h,f944h,d788h,0072h,2910h,d1a0h,6388h, 3412[ 6.201701] [2: sh: 949] macloader: Not yet wlan interface loaded 3413[ 6.208545] [1: healthd: 645] sec_bat_get_property cable type = 4 sleep_mode = 0 3414[ 6.210227] [3: healthd: 645] max77854_fg_get_scaled_capacity : current_standard(1000) 3415[ 6.210274] [3: healthd: 645] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (979) scaled capacity(98.8), raw_soc(96.8) 3416[ 6.210535] [3: healthd: 645] healthd: batteryPogoOnlnePath not found 3417[ 6.233300] [0: kworker/u8:3: 51] sec_bat_get_property cable type = 4 sleep_mode = 0 3418[ 6.235086] [0: kworker/u8:3: 51] max77854_fg_get_scaled_capacity : current_standard(1000) 3419[ 6.235181] [0: kworker/u8:3: 51] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (979) scaled capacity(98.8), raw_soc(96.8) 3420[ 6.235370] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4140mV),Inow(-740mA),Imax(500mA),SOC(98%),Tbat(270),Tchg(330),Twpc(330),sw_self_dis(0) 3421[ 6.236322] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 420 sec, passed time: 0 3422[ 6.238544] [0: kworker/u8:3: 51] max77854_get_charging_health: reg_data(0x3) 3423[ 6.239438] [0: kworker/u8:3: 51] sec_bat_get_property cable type = 4 sleep_mode = 0 3424[ 6.239522] [3: surfaceflinger: 649] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 3425[ 6.240864] [3: surfaceflinger: 649] mdss_dsi_panel_off:- 3426[ 6.240896] [3: surfaceflinger: 649] mdss_dsi_blank-:End 3427[ 6.240926] [3: surfaceflinger: 649] [MDSS_EVENT_BLANK] 3428[ 6.240957] [3: surfaceflinger: 649] mdss_dsi_blank+: ctrl=ffffffc0f687d018 ndx=1 power_state=0 3429[ 6.241019] [3: surfaceflinger: 649] mdss_dsi_panel_off: ctrl=ffffffc0f687d018 ndx=1 3430[ 6.241056] [3: surfaceflinger: 649] mdss_dsi_panel_off:- 3431[ 6.241088] [3: surfaceflinger: 649] mdss_dsi_blank-:End 3432[ 6.241252] [3: surfaceflinger: 649] mdss_mdp_cmd_reconfigure_splash_done ++ 3433[ 6.241287] [3: surfaceflinger: 649] [MDSS_EVENT_PANEL_OFF] 3434[ 6.241316] [0: kworker/u8:3: 51] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 3435[ 6.241365] [3: surfaceflinger: 649] mdss_dsi_off+: ctrl=ffffffc0f687c018 ndx=0 power_state=0 3436[ 6.248477] [3: surfaceflinger: 649] mdss_dsi_off-: 3437[ 6.248504] [3: surfaceflinger: 649] [MDSS_EVENT_PANEL_OFF] 3438[ 6.248533] [3: surfaceflinger: 649] mdss_dsi_off+: ctrl=ffffffc0f687d018 ndx=1 power_state=0 3439[ 6.249079] [3: surfaceflinger: 649] mdss_dsi_off-: 3440[ 6.252584] [1: mdss_fb0: 763] [MDSS_EVENT_LINK_READY] 3441[ 6.252629] [1: mdss_fb0: 763] mdss_dsi_on+: ctrl=ffffffc0f687c018 ndx=0 cur_power_state=0 3442[ 6.263172] [0: kworker/u8:3: 51] MAX77854 : [0xb1]0x1e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 3443[ 6.263476] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_time_management: Charging Time : 4 secs 3444[ 6.263555] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_temperature: HLT(800) HLR(750) HT(550), HR(500), LT(-50), LR(0) 3445[ 6.263634] [0: kworker/u8:3: 51] sec_bat_wc_heating_time_management: Heating time(0), wpc_temp_mode(0) 3446[ 6.265455] [0: kworker/u8:3: 51] sec_bat_swelling_check: status(1), swell_mode(0:0), cv(0x19), temp(270) 3447[ 6.265539] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_fullcharged_check: Charging Mode : Normal 3448[ 6.265615] [0: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%), HV(NONE), sleep_mode(0), Cycle(-1) 3449[ 6.265950] [0: kworker/0:1: 43] sec_bat_get_property cable type = 4 sleep_mode = 0 3450[ 6.267265] [3: healthd: 645] sec_bat_get_property cable type = 4 sleep_mode = 0 3451[ 6.267517] [3: healthd: 645] healthd-android: healthd_mode_android_battery_update 3452[ 6.267579] [3: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : start 3453[ 6.267623] [3: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : done 3454[ 6.267662] [0: kworker/u8:3: 51] max77854_fg_read_vcell: VCELL(4192), data(0xd1a0) 3455[ 6.280256] [1: init: 1] init: cannot find '/system/bin/sysmon', disabling 'sysmon' 3456[ 6.281006] [1: init: 1] usb: dwc3_gadget_pullup is_on: 0 3457[ 6.281081] [1: init: 1] usb: dwc3_gadget_run_stop is_on:0 3458[ 6.281220] [1: init: 1] dwc3 6a00000.dwc3: request ffffffc0f57d7500 was not queued to ep0out 3459[ 6.281289] [1: init: 1] usb:: usb_remove_config cdev->config=ffffffc0748fda00, config=ffffffc0748fda00 3460[ 6.281370] [1: init: 1] [mtpg_function_disable] line = [1539] 3461[ 6.281444] [1: init: 1] [mtpg_function_unbind] line = [1341] 3462[ 6.281537] [1: init: 1] DUN is unregisterd 3463[ 6.281802] [1: init: 1] usb: enable_store f_holder->f:mtp 3464[ 6.281856] [1: init: 1] usb: enable_store f_holder->f:acm 3465[ 6.281902] [1: init: 1] usb: acm is enabled. (bcdDevice=0x400) 3466[ 6.281955] [1: init: 1] usb: enable_store f_holder->f:ffs 3467[ 6.282324] [1: init: 1] init: Starting service 'adbd'... 3468[ 6.283322] [2: mdss_fb0: 763] mdss_dsi_on-: 3469[ 6.283386] [2: mdss_fb0: 763] [MDSS_EVENT_LINK_READY] 3470[ 6.283445] [2: mdss_fb0: 763] mdss_dsi_on+: ctrl=ffffffc0f687d018 ndx=1 cur_power_state=0 3471[ 6.283537] [2: mdss_fb0: 763] [MDSS] esd_irq_enable : ESD irq already enabled 3472[ 6.284909] [2: mdss_fb0: 763] mdss_dsi_on-: 3473[ 6.284965] [2: mdss_fb0: 763] [MDSS_EVENT_UNBLANK] 3474[ 6.285034] [2: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_pre : +: ndx=0 3475[ 6.289587] [2: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : 4[3] : 00 40 44 . 3476[ 6.290568] [2: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_pre : DSI0 manufacture_id(04h)=0x4044 3477[ 6.290668] [2: mdss_fb0: 763] [MDSS] mdss_panel_attach_set : panel_attach_status : 3 3478[ 6.290753] [2: mdss_fb0: 763] [MDSS] mdss_panel_revision : panel_rev not found 3479[ 6.290833] [2: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_pre : DSI0 Panel_Revision = C 2 3480[ 6.291454] [1: BootAnimation: 936] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_verify_mac' 3481[ 6.291587] [1: BootAnimation: 936] !@BootAnimation : Could not open '/sys/devices/w1_bus_master1/w1_master_check_id' 3482[ 6.291670] [1: BootAnimation: 936] !@BootAnimation : BootAnimData_STATUS = 0x3 3483[ 6.294512] [1: BootAnimation: 936] leds-max77854-rgb: store_max77854_rgb_pattern, pattern=6, lowpower_mode : 0 3484[ 6.294598] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state 3485[ 6.294653] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 1 3486[ 6.294716] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 1 3487[ 6.296520] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state, led_num = 1, brightness = 0 3488[ 6.298973] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state 3489[ 6.299038] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 2 3490[ 6.299095] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 2 3491[ 6.299823] [2: adbd: 952] read descriptors 3492[ 6.299877] [2: adbd: 952] read strings 3493[ 6.299931] [2: adbd: 952] [mtpg_function_bind] line = [1368] 3494[ 6.300095] [2: adbd: 952] super speed mtp: IN/ep1in, OUT/ep1out 3495[ 6.300245] [2: adbd: 952] DUN is registerd 3496[ 6.300832] [0: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : C8[4] : 5a 16 10 09 . 3497[ 6.301783] [0: mdss_fb0: 763] [MDSS] mdss_manufacture_date_read : manufacture_date DSI0 = (201610220009) - year(2016) month(10) day(22) hour(0) min(9) 3498[ 6.301891] [1: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state, led_num = 2, brightness = 0 3499[ 6.303653] [1: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : D6[5] : c0 08 50 71 36 . 3500[ 6.304164] [1: mdss_fb0: 763] [MDSS] mdss_ddi_id_read : DSI0 : c0 08 50 71 36 3501[ 6.305444] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state 3502[ 6.305497] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 3 3503[ 6.305546] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 3 3504[ 6.305799] [0: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : C8[7] : 5a 16 10 09 05 23 fd . 3505[ 6.306357] [0: mdss_fb0: 763] [MDSS] mdss_cell_id_read : DSI0: 5a 16 10 09 05 23 fd 00 00 00 00 3506[ 6.307573] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state, led_num = 3, brightness = 0 3507[ 6.307898] [0: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : B5[2] : 10 04 . 3508[ 6.309730] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_ramp 3509[ 6.313213] [1: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : B3[33] : 6f 1a 18 1a 7e 7e 7e 7c 7c 7c .7e 7e 7e 7d 7d 7d 7e 7e 7e 7e .7e 7e 7c 7c 7d 80 7f 7f 00 00 .00 00 00 . 3510[ 6.314984] [1: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : A1[4] : 0b af 0c 5c . 3511[ 6.315436] [1: mdss_fb0: 763] [MDSS] mdss_mdnie_read : DSI0 : X-2991 Y-3164 3512[ 6.319293] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_ramp 3513[ 6.319947] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_blink 3514[ 6.320602] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state 3515[ 6.320638] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 3 3516[ 6.320673] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 3 3517[ 6.320865] [0: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : C8[35] : 00 78 00 48 00 95 60 60 63 5c .5c 5f 42 43 49 49 48 4e 56 55 .5c 54 54 5a 35 3a 42 04 18 10 .00 00 00 10 00 . 3518[ 6.321326] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state, led_num = 3, brightness = 17 3519[ 6.321803] [0: mdss_fb0: 763] smart_dimming_init : ++ id3(68) 3520[ 6.321851] [0: mdss_fb0: 763] set_project_type : projcet is hero 3521[ 6.321891] [2: init: 1] set_max_lux_table ldi_revision: 0x4044 3522[ 6.322153] [2: init: 1] init: Function: selinux_compare_spd_ram, index[0], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 3523[ 6.322219] [0: mdss_fb0: 763] smart_dimming_init done 3524[ 6.322252] [0: mdss_fb0: 763] [MDSS] mdss_samart_dimming_init : DSI0 : -- 3525[ 6.322289] [0: mdss_fb0: 763] [MDSS] mdss_samart_dimming_init_hmt : DSI0 : ++ 3526[ 6.323219] [2: init: 1] init: Function: selinux_compare_spd_ram, index[3], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 3527[ 6.327152] [1: mdss_fb0: 763] [MDSS] samsung_nv_read : mdss DSI0 read_reg : C8[35] : 00 78 00 48 00 95 60 60 63 5c .5c 5f 42 43 49 49 48 4e 56 55 .5c 54 54 5a 35 3a 42 04 18 10 .00 00 00 10 00 . 3528[ 6.327710] [1: mdss_fb0: 763] smart_dimming_init_hmt : ++ id3(68) rev(4) 3529[ 6.327753] [1: mdss_fb0: 763] set_project_type : projcet is hero 3530[ 6.327791] [1: mdss_fb0: 763] set_max_lux_table ldi_revision: 0x4044 3531[ 6.327935] [1: mdss_fb0: 763] smart_dimming_init_hmt done 3532[ 6.327968] [1: mdss_fb0: 763] [MDSS] mdss_make_sdimconf_hmt : [HMT] smart dimming done! 3533[ 6.328015] [1: mdss_fb0: 763] [MDSS] mdss_samart_dimming_init_hmt : DSI0 : -- 3534[ 6.328060] [1: mdss_fb0: 763] [MDSS] mdss_panel_on_pre : +: ndx=0 3535[ 6.328103] [1: mdss_fb0: 763] [MDSS] mdss_panel_attach_set : panel_attach_status : 3 3536[ 6.328164] [1: mdss_fb0: 763] [MDSS] mdss_panel_on_pre : -: ndx=0 3537[ 6.328202] [1: mdss_fb0: 763] [MDSS] init_ldi_fps : (0xc5) 3538[ 6.328238] [1: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_pre : -: ndx=0 3539[ 6.330048] [3: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state 3540[ 6.330092] [2: adbd: 952] usb: dwc3_gadget_pullup is_on: 1 3541[ 6.330131] [3: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 2 3542[ 6.330169] [2: adbd: 952] usb: dwc3_gadget_run_stop is_on:1 3543[ 6.330207] [3: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_number, 2 3544[ 6.336449] I[0: swapper/0: 0] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND. 3545[ 6.354743] [1: init: 1] init: SELinux: Loaded file_contexts contexts from /file_contexts. 3546[ 6.354851] [1: init: 1] init: Function: selinux_compare_spd_ram, index[2], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 3547[ 6.355844] [1: init: 1] init: SELinux: Loaded property_contexts from /property_contexts. 3548[ 6.355935] [1: init: 1] init: Function: selinux_compare_spd_ram, index[6], priority [2], priority version is VE=SEPF_SECMOBILE_6.0.1_0013 3549[ 6.361193] [2: init: 1] init: Not bootcharting. 3550[ 6.395631] [2: init: 1] init: do_restorecon: Could not access /carrier 3551[ 6.400306] [2: init: 1] init: SELinux: Skipping restorecon_recursive(/data) 3552[ 6.401149] [2: init: 1] init: Starting service 'exec 2 (/system/bin/tzdatacheck)'... 3553[ 6.415341] [2: init: 1] init: Service 'exec 2 (/system/bin/tzdatacheck)' (pid 957) exited with status 0 3554[ 6.450566] [3: kworker/u8:3: 51] [FG] 0080h,ffa3h,7f80h,ff01h,1900h,15bdh,60d0h,5cadh,1b00h,d1a0h,ed80h,f795h,0059h,6489h,60cdh,15bfh,157ch,1456h,2a00h,5d00h,01f3h,0148h,197dh,02afh,173bh,d487h,290dh,da96h,46ach,0314h,0500h,1567h,ffffh,20c0h,1400h,158ch,1403h,2305h,197ch,8004h,2473h,cea4h,2039h,09d0h,e3e1h,290eh,0400h,0001h,2216h,45e1h,0900h,ffffh,1d70h,1675h,123ch,05e0h,007eh,3639h,7d54h,f795h,1680h,1008h,7514h,e000h,78b4h,a8e6h,0800h,0000h,d5e3h,061dh,38bch,0101h,6445h,2241h,1587h,0000h,0f11h,0ef5h,d2e8h,15d5h,0000h,0000h,7f80h,0000h,7f80h,0005h,00bah,0954h,0000h,006bh,090ch,0050h,0be5h,0204h,0779h,0002h,0000h,100fh,0c0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0014h,ffffh,60d0h,15abh,1a71h,0539h,0001h,0008h,167eh,0000h,7fffh,ffffh,4c40h,fff8h,4200h,0000h,4000h,0000h,7d00h,0308h,0000h,0000h,0000h,0000h,245bh,0000h,0000h,0002h,4002h,5805h,f834h,d787h,0072h,2913h,d1aah,6388h, 3555[ 6.451184] [2: BootAnimation: 936] leds-max77854-rgb: max77854_rgb_set_state, led_num = 2, brightness = 5 3556[ 6.455277] [0: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_post : +: ndx=0 3557[ 6.455326] [0: mdss_fb0: 763] [MDSS] mdss_aid : level(255), aid(0 a) 3558[ 6.455817] [0: mdss_fb0: 763] [MDSS] mdss_samsung_brightness_dcs : DSI0 level : 255 candela : 420CD hbm : 0 (0) 3559[ 6.455876] [0: mdss_fb0: 763] [mdnie_mdss] SINGLE index : 0 hbm : 0 mdnie_bypass : 0 mdnie_accessibility : 0 mdnie_app: 0 mdnie_mode : 4 3560[ 6.456404] [0: mdss_fb0: 763] [MDSS] esd_irq_enable : ESD irq already enabled 3561[ 6.456451] [0: mdss_fb0: 763] [MDSS] mdss_samsung_panel_on_post : -: ndx=0 3562[ 6.456498] [0: mdss_fb0: 763] mdss_dsi_unblank-: 3563[ 6.456539] [0: mdss_fb0: 763] [MDSS_EVENT_UNBLANK] 3564[ 6.456914] [0: mdss_fb0: 763] mdss_dsi_unblank-: 3565[ 6.456947] [0: mdss_fb0: 763] [MDSS_EVENT_PANEL_ON] 3566[ 6.456980] [0: mdss_fb0: 763] [MDSS_EVENT_PANEL_ON] 3567[ 6.461912] [0: mdss_fb0: 763] [MDSS] mdss_samsung_event_frame_update : DISPLAY_ON 3568[ 6.471516] [3: init: 1] init: Starting service 'icd'... 3569[ 6.472473] [3: init: 1] init: Starting service 'edmaudit'... 3570[ 6.473437] [3: init: 1] init: Starting service 'scs'... 3571[ 6.474347] [3: init: 1] init: Starting service 'netd'... 3572[ 6.475214] [3: init: 1] init: Starting service 'debuggerd'... 3573[ 6.476118] [3: init: 1] init: Starting service 'debuggerd64'... 3574[ 6.477041] [3: init: 1] init: Starting service 'SIDESYNC_service'... 3575[ 6.477988] [3: init: 1] init: Starting service 'ss_kb_service'... 3576[ 6.478956] [3: init: 1] init: Starting service 'drm'... 3577[ 6.483284] I[0: init: 964] usb:: dwc3_gadget_reset_interrupt 3578[ 6.483360] I[0: init: 964] msm-dwc3 6a00000.ssusb: Avail curr from USB = 0 3579[ 6.483424] I[0: init: 964] usb:: composite_disconnect 3580[ 6.483790] [0: kworker/0:1: 43] android_work: android_work: sent uevent USB_STATE=DISCONNECTED 3581[ 6.485605] [1: healthd: 645] sec_bat_get_property cable type = 4 sleep_mode = 0 3582[ 6.485687] [0: init: 1] init: Starting service 'media'... 3583[ 6.485939] [1: healthd: 645] healthd-android: healthd_mode_android_battery_update 3584[ 6.485995] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : start 3585[ 6.486048] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : done 3586[ 6.486994] [0: init: 1] init: Starting service 'apaservice'... 3587[ 6.488185] [0: init: 1] init: Starting service 'jackservice'... 3588[ 6.489368] [0: init: 1] init: Starting service 'installd'... 3589[ 6.509277] [0: init: 1] init: Starting service 'flash_recovery'... 3590[ 6.510181] [2: kworker/u8:3: 51] sec_bat_get_property cable type = 4 sleep_mode = 0 3591[ 6.510645] [0: init: 1] init: Starting service 'mobex-daemon'... 3592[ 6.511850] [0: init: 1] init: Starting service 'keystore'... 3593[ 6.513213] [2: kworker/u8:3: 51] max77854_fg_get_scaled_capacity : current_standard(1000) 3594[ 6.513258] [0: init: 1] init: Starting service 'sensorhubservice'... 3595[ 6.513318] [2: kworker/u8:3: 51] max77854_fg_get_scaled_capacity : CABLE TYPE(4) INPUT CURRENT(500) CHARGING MODE(CC Mode)capacity_max (979) scaled capacity(98.8), raw_soc(96.8) 3596[ 6.513414] [2: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_get_battery_info:Vnow(4192mV),Inow(-855mA),Imax(500mA),SOC(98%),Tbat(270),Tchg(330),Twpc(330),sw_self_dis(0) 3597[ 6.514433] [0: init: 1] init: Starting service 'qcom-c_main-sh'... 3598[ 6.515679] [0: init: 1] init: Starting service 'tftp_server'... 3599[ 6.516644] [0: init: 1] init: Starting service 'sec-sh'... 3600[ 6.517390] [0: init: 1] init: cannot find '/system/bin/ptt_socket_app', disabling 'ptt_socket_app' 3601[ 6.517489] [0: init: 1] init: cannot find '/system/bin/usb_uicc_client', disabling 'usb_uicc_daemon' 3602[ 6.517602] [0: init: 1] init: cannot find '/system/bin/wfdservice', disabling 'wfdservice' 3603[ 6.518264] [0: init: 1] init: Starting service 'thermal-engine'... 3604[ 6.519733] [0: init: 1] init: Starting service 'adsprpcd'... 3605[ 6.520693] [2: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_calc_time_to_full: T: 420 sec, passed time: 4 3606[ 6.522976] [2: kworker/u8:3: 51] max77854_get_charging_health: reg_data(0x3) 3607[ 6.523869] [2: kworker/u8:3: 51] sec_bat_get_property cable type = 4 sleep_mode = 0 3608[ 6.523945] [2: kworker/u8:3: 51] max77854_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO 3609[ 6.525618] [2: kworker/u8:3: 51] max77854_get_charging_health: vbus_state : 0x3, chg_dtls : 0x1 3610[ 6.538020] I[0: ss_conn_daemon: 964] usb:: dwc3_gadget_conndone_interrupt (HS) 3611[ 6.539399] [3: Binder_1: 675] pil-q6v5-mss 2080000.qcom,mss: modem: Brought out of reset 3612[ 6.552186] I[0: Binder_1: 663] usb:: GET_DES 3613[ 6.553830] [0: kworker/0:1: 43] android_work: android_work: sent uevent USB_STATE=CONNECTED 3614[ 6.577570] [2: kworker/u8:3: 51] MAX77854 : [0xb1]0x1e, [0xb2]0xdd, [0xb3]0x60, [0xb4]0x31, [0xb5]0x00, [0xb6]0xff, [0xb7]0x15, [0xb8]0x38, [0xb9]0x4e, [0xba]0x3b, [0xbb]0x99, [0xbc]0x1c, [0xbd]0x0c, [0xbe]0x34, [0xbf]0xff, [0xc0]0x0f, [0xc1]0x10, [0xc2]0x00, [0xc3]0x61, 3615[ 6.577697] [2: kworker/u8:3: 51] sec-battery soc:battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), level(100%), HV(NONE), sleep_mode(0), Cycle(-1) 3616[ 6.578025] [2: kworker/2:0: 17] sec_bat_get_property cable type = 4 sleep_mode = 0 3617[ 6.580375] [1: healthd: 645] sec_bat_get_property cable type = 4 sleep_mode = 0 3618[ 6.580737] [1: healthd: 645] healthd-android: healthd_mode_android_battery_update 3619[ 6.580802] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : start 3620[ 6.580855] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : done 3621[ 6.600652] [0: init: 1] init: Starting service 'TvoutService_C'... 3622[ 6.601414] [0: init: 1] init: cannot find '/system/bin/imsqmidaemon', disabling 'imsqmidaemon' 3623[ 6.602039] [0: init: 1] init: Starting service 'energy-awareness'... 3624[ 6.603319] [0: init: 1] init: Starting service 'zygote'... 3625[ 6.604187] [0: init: 1] init: Starting service 'zygote_secondary'... 3626[ 6.605399] [0: init: 1] init: Starting service 'ipsec-daemon'... 3627[ 6.618640] I[0: sh: 994] usb: set_config_number single config num=0 3628[ 6.618695] I[0: sh: 994] usb: set_interface_count next_interface_id=4 3629[ 6.619009] I[0: sh: 994] usb: set_config_number single config num=0 3630[ 6.619056] I[0: sh: 994] usb: set_interface_count next_interface_id=4 3631[ 6.620391] [2: irq/553-modem: 391] pil-q6v5-mss 2080000.qcom,mss: modem: Power/Clock ready interrupt received 3632[ 6.620446] I[0: kworker/0:1H: 565] pil-q6v5-mss 2080000.qcom,mss: Subsystem error monitoring/handling services are up 3633[ 6.621446] [0: sh: 990] init.sec.boot.sh: start 3634[ 6.621622] [0: sh: 990] Running do_deferred_initcalls() 3635[ 6.621673] [0: sh: 990] dhd_wlan_init: START....... 3636[ 6.621706] [0: sh: 990] board_rev f 3637[ 6.622673] [0: sh: 990] dhd_wifi_init_gpio: gpio_wlan_power : 120 3638[ 6.622733] [0: sh: 990] dhd_wifi_init_gpio: gpio_request WL_REG_ON done - WLAN_EN: GPIO 120 3639[ 6.622840] [0: sh: 990] dhd_wifi_init_gpio: WL_REG_ON is pulled up 3640[ 6.622915] [0: sh: 990] dhd_wifi_init_gpio: Initial WL_REG_ON: [1] 3641[ 6.630907] [3: irq/553-modem: 391] M-Notify: General: 7 3642[ 6.630971] [3: Binder_1: 675] IPA received MPSS AFTER_POWERUP 3643[ 6.631004] [3: Binder_1: 675] IPA AFTER_POWERUP handling is complete 3644[ 6.636083] [0: init: 1] init: Starting service 'imsd'... 3645[ 6.638074] [0: ss_conn_daemon: 964] conn_gadget_open 3646[ 6.638177] [0: ss_conn_daemon: 964] conn_gadget_flush 3647[ 6.638214] [0: ss_conn_daemon: 964] conn_gadget_release 3648[ 6.640180] [0: ss_conn_daemon: 964] conn_gadget_in_max_packet_size_show() _conn_gadget_dev is NULL 3649[ 6.640465] [0: ss_conn_daemon: 964] conn_gadget_out_max_packet_size_show() _conn_gadget_dev is NULL 3650[ 6.641054] [0: ss_conn_daemon: 964] conn_gadget_open 3651[ 6.643121] [0: ss_conn_daemon: 1001] conn_gadget_poll() _conn_gadget_dev is offlined 3652[ 6.643186] [0: ss_conn_daemon: 1001] conn_gadget_poll() _conn_gadget_dev is offlined 3653[ 6.667928] [0: init: 1] init: Starting service 'DR-daemon'... 3654[ 6.669409] [0: init: 1] init: Starting service 'BCS-daemon'... 3655[ 6.672746] [0: ss_conn_daemon: 1001] conn_gadget_poll() _conn_gadget_dev is offlined 3656[ 6.672910] [0: ss_conn_daemon: 1001] conn_gadget_poll() _conn_gadget_dev is offlined 3657[ 6.681885] [0: init: 1] init: Starting service 'ril-daemon'... 3658[ 6.683182] [0: init: 1] init: Starting service 'diag_uart_log'... 3659[ 6.684435] [0: init: 1] init: Starting service 'SMD-daemon'... 3660[ 6.684658] I[0: init: 1] usb:: SET_CON 3661[ 6.684694] I[0: init: 1] android_usb gadget: high-speed config #1: 66bf0c8.android_usb 3662[ 6.684857] I[0: init: 1] msm-dwc3 6a00000.ssusb: Avail curr from USB = 500 3663[ 6.684921] I[0: init: 1] dwc3 6a00000.dwc3: ep6In not enabled 3664[ 6.684966] I[0: init: 1] dwc3 6a00000.dwc3: ep7In not enabled 3665[ 6.685325] [0: kworker/0:1: 43] android_work: android_work: sent uevent USB_STATE=CONFIGURED 3666[ 6.686766] [1: healthd: 645] sec_bat_get_property cable type = 4 sleep_mode = 0 3667[ 6.687102] [1: healthd: 645] healthd-android: healthd_mode_android_battery_update 3668[ 6.687163] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : start 3669[ 6.687222] [1: healthd: 645] BatteryPropertiesRegistrar: notifyListeners : done 3670[ 6.732579] [0: init: 1] init: Starting service 'epmlogd'... 3671[ 6.733909] [0: init: 1] init: Starting service 'sdp_cryptod'... 3672[ 6.735826] [0: init: 1] init: Starting service 'bootchecker'... 3673[ 6.737097] [0: init: 1] init: Starting service 'gatekeeperd'... 3674[ 6.751330] [2: kworker/u8:4: 321] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service 3675[ 6.774073] [0: adsprpcd: 995] 'opened /dev/adsprpc-smd c 215 0' 3676[ 6.791791] [1: rmt_storage: 1029] msm_sharedmem: status_read: sys_shutdown_status: 0 3677[ 6.812458] [0: rmt_storage: 1020] msm_sharedmem: status_read: sys_shutdown_status: 0 3678[ 6.821495] [0: rmt_storage: 1028] msm_sharedmem: status_read: sys_shutdown_status: 0 3679[ 6.829324] [0: rmt_storage: 1020] msm_sharedmem: status_read: sys_shutdown_status: 0 3680[ 6.830307] [0: sh: 990] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC0. 3681[ 6.834793] [0: sh: 990] msm_pcie_enable: PCIe RC0 PHY is ready! 3682[ 6.838005] [0: init: 1] init: cannot find '/system/xbin/perfprofd', disabling 'perfprofd' 3683[ 6.838218] [0: init: 1] init: cannot find '/system/bin/cnd', disabling 'cnd' 3684[ 6.838331] [0: init: 1] init: cannot find '/system/bin/dpmd', disabling 'dpmd' 3685[ 6.839739] [0: init: 1] init: Starting service 'loc_launcher'... 3686[ 6.840905] [0: init: 1] init: Starting service 'qcom-sh'... 3687[ 6.842147] [0: init: 1] init: Starting service 'RIDL'... 3688[ 6.844983] [0: sh: 990] msm_pcie_enable: PCIe: Release the reset of endpoint of RC0. 3689[ 6.880693] [0: sh: 990] msm_pcie_enable: PCIe RC0 link initialized 3690[ 6.880895] [0: sh: 990] PCI host bridge /soc/qcom,pcie@00600000 ranges: 3691[ 6.880945] [0: sh: 990] No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff] 3692[ 6.881010] [0: sh: 990] IO 0x0c200000..0x0c2fffff -> 0x0c200000 3693[ 6.881057] [0: sh: 990] MEM 0x0c300000..0x0cffffff -> 0x0c300000 3694[ 6.881346] [0: sh: 990] pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00 3695[ 6.881398] [0: sh: 990] pci_bus 0000:00: root bus resource [bus 00-ff] 3696[ 6.881444] [0: sh: 990] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff]) 3697[ 6.881505] [0: sh: 990] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff] 3698[ 6.881604] [0: sh: 990] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400 3699[ 6.881701] [0: sh: 990] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0014[4] is all FFs 3700[ 6.881753] [0: sh: 990] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] 3701[ 6.881957] [0: sh: 990] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold 3702[ 6.882045] [0: sh: 990] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19 3703[ 6.882551] [0: sh: 990] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring 3704[ 6.883172] [0: sh: 990] pci 0000:01:00.0: [14e4:4415] type 00 class 0x028000 3705[ 6.883531] [0: sh: 990] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x0014[4] is all FFs 3706[ 6.883588] [0: sh: 990] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit] 3707[ 6.883921] [0: sh: 990] msm_pcie_oper_conf: Read of RC0 1:0x00 + 0x001c[4] is all FFs 3708[ 6.883984] [0: sh: 990] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit] 3709[ 6.884658] [0: sh: 990] pci 0000:01:00.0: supports D1 D2 3710[ 6.884698] [0: sh: 990] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold 3711[ 6.885400] [0: sh: 990] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 3712[ 6.885635] [0: sh: 990] msm_pcie_oper_conf: Read of RC0 0:0x00 + 0x0028[4] is all FFs 3713[ 6.885700] [0: sh: 990] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff] 3714[ 6.885753] [0: sh: 990] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit] 3715[ 6.885971] [0: sh: 990] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit] 3716[ 6.886077] [0: sh: 990] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit] 3717[ 6.886406] [0: sh: 990] pci 0000:00:00.0: PCI bridge to [bus 01] 3718[ 6.886603] [0: sh: 990] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff] 3719[ 6.887299] [0: sh: 990] dhd_wifi_init_gpio: gpio_wlan_power : 121 3720[ 6.887361] [0: sh: 990] dhd_wifi_init_gpio: gpio_request WLAN_HOST_WAKE done - WLAN_HOST_WAKE: GPIO 121 3721[ 6.887621] [0: sh: 990] dhd_init_wlan_mem: WIFI MEM Allocated 3722[ 6.887672] [0: sh: 990] dhd_wlan_init: FINISH....... 3723[ 6.907237] [0: init: 1] init: Starting service 'qseeproxydaemon'... 3724[ 6.908035] [0: init: 1] init: cannot find '/system/vendor/bin/seemp_healthd', disabling 'seemp_healthd' 3725[ 6.908667] [0: init: 1] init: Starting service 'qcamerasvr'... 3726[ 6.910005] [0: init: 1] init: Starting service 'fingerprintd'... 3727[ 6.919083] [0: kworker/0:1: 43] platform sys_mon.0: Driver sys_mon requests probe deferral 3728[ 6.924027] [1: thermal-engine: 1114] msm_thermal:set_enabled enabled = 0 3729[ 6.925195] I[0: tftp_server: 989] random: nonblocking pool is initialized 3730[ 6.930117] [0: kworker/0:1: 43] apr_tal:Modem Is Up 3731[ 6.930982] [1: kworker/u8:9: 946] platform sys_mon.0: Driver sys_mon requests probe deferral 3732[ 6.935507] [1: kworker/u8:6: 323] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, ffffffc001e8ed08 3733[ 6.935618] [1: kworker/u8:6: 323] diag: Control packet 12 not supported 3734[ 6.947164] [0: sh: 990] cell-index 0, rc 0 3735[ 6.947240] [0: sh: 990] msm_eeprom_spi_setup qcom,eeprom-name fidelix, rc 0 3736[ 6.947355] [0: sh: 990] msm_eeprom_parse_memory_map::450 qcom,num-blocks 16 3737[ 6.947404] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 0 3738[ 6.947446] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 1 3739[ 6.947488] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 2 3740[ 6.947569] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 3 3741[ 6.947612] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 4 3742[ 6.947655] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 5 3743[ 6.947705] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 6 3744[ 6.947747] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 7 3745[ 6.947793] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 8 3746[ 6.947839] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 9 3747[ 6.947888] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 10 3748[ 6.947931] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 11 3749[ 6.947975] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 12 3750[ 6.948029] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 13 3751[ 6.948077] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 14 3752[ 6.948123] [0: sh: 990] msm_eeprom_parse_memory_map, 464: i = 15 3753[ 6.948169] [0: sh: 990] msm_eeprom_parse_memory_map::509 valid size = 11888 3754[ 6.948213] [0: sh: 990] msm_eeprom_parse_memory_map::515 qcom,total-size 16384 3755[ 6.948259] [0: sh: 990] msm_eeprom_parse_memory_map::520 set num_data as total-size in order to use same address at cal map(total : 16384, valid : 11888) 3756[ 6.948337] [0: sh: 990] msm_camera_power_up:1813 3757[ 6.948394] [0: sh: 990] msm_camera_pinctrl_init:1784 Getting pinctrl handle failed 3758[ 6.948442] [0: sh: 990] msm_camera_power_up:1825 Initialization of pinctrl failed 3759[ 6.948489] [0: sh: 990] msm_camera_request_gpio_table:752 invalid gpio_tbl (null) / size 0 3760[ 6.949645] [0: init: 1] init: cannot find '/system/bin/qvop-daemon', disabling 'qvop-daemon' 3761[ 6.949736] [0: init: 1] init: cannot find '/system/bin/gpu_snapshotd', disabling 'gpu_snapshotd' 3762[ 6.949815] [0: init: 1] init: cannot find '/system/bin/secotad', disabling 'secotad' 3763[ 6.950896] [0: init: 1] init: Starting service 'time_daemon'... 3764[ 6.952347] [0: init: 1] init: Starting service 'audiod'... 3765[ 6.999228] [1: kworker/u8:4: 321] ipa-wan handle_indication_req:133 not send indication 3766[ 7.000121] [1: kworker/u8:9: 946] Sending QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 3767[ 7.002076] [1: kworker/u8:4: 321] ipa ipa_uc_response_hdlr:455 IPA uC loaded 3768[ 7.002140] [1: kworker/u8:4: 321] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 3769[ 7.002213] [1: kworker/u8:9: 946] QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 response received 3770[ 7.004953] [1: kworker/u8:4: 321] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 3771[ 7.006038] [0: init: 1] init: Starting service 'usf_proximity'... 3772[ 7.008935] [0: init: 1] init: cannot find '/system/bin/dts_configurator', disabling 'dts_configurator' 3773[ 7.009027] [0: init: 1] init: cannot find '/system/bin/tloc_daemon', disabling 'tlocd' 3774[ 7.009100] [0: init: 1] init: cannot find '/system/bin/vcsFPService', disabling 'vcsFPService' 3775[ 7.009301] [1: kworker/u8:4: 321] ipa ipa_uc_wdi_event_log_info_handler:338 WDI stats ofst=0x45130 3776[ 7.009374] [1: kworker/u8:4: 321] ipa ipa_sps_irq_control_all:905 EP (5) not allocated. 3777[ 7.009469] [1: sh: 990] msm_eeprom_match_id: rear eeprom 3778[ 7.010494] [0: init: 1] init: Starting service 'at_distributor'... 3779[ 7.010753] [1: sh: 990] msm_eeprom_match_id: read 0xC815, check Fidelix 32Mb:0xF815, Winbond 32Mb:0xEF15, Macronix 32Mb:0xC236, GigaDevice 32Mb:0xC815 3780[ 7.010892] [1: sh: 990] num_map = 16, Normal CRC value = 0xFF 3781[ 7.010932] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59c8000, addr = 0x0, size = 480 3782[ 7.013703] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59c8ffc, addr = 0xFFC, size = 4 3783[ 7.014068] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59c9006, addr = 0x1006, size = 5880 3784[ 7.021194] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59ca6fe, addr = 0x26FE, size = 4 3785[ 7.023285] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59ca702, addr = 0x2702, size = 228 3786[ 7.023958] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59ca7e6, addr = 0x27E6, size = 4 3787[ 7.024251] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59ca7f0, addr = 0x27F0, size = 4096 3788[ 7.026636] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cb7f0, addr = 0x37F0, size = 4 3789[ 7.030188] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cb7f4, addr = 0x37F4, size = 1056 3790[ 7.033186] [0: init: 1] init: Service 'energy-awareness' (pid 997) exited with status 0 3791[ 7.035012] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc14, addr = 0x3C14, size = 4 3792[ 7.035411] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc20, addr = 0x3C20, size = 28 3793[ 7.035702] [0: init: 1] init: Service 'epmlogd' (pid 1023) exited with status 0 3794[ 7.040172] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc3c, addr = 0x3C3C, size = 4 3795[ 7.043568] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc40, addr = 0x3C40, size = 28 3796[ 7.044641] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc5c, addr = 0x3C5C, size = 4 3797[ 7.044966] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc60, addr = 0x3C60, size = 60 3798[ 7.046801] [1: sh: 990] read_eeprom_memory: 371 memptr = ffffffc0e59cbc9c, addr = 0x3C9C, size = 4 3799[ 7.047562] [1: sh: 990] msm_eeprom_spi_setup: read cal data ok!! 3800[ 7.047610] [1: sh: 990] msm_eeprom_match_crc: map version = 2 [0x32] 3801[ 7.047657] [1: sh: 990] msm_eeprom_verify_sum: expect 0x7bfebf58, result 0x7bfebf58 3802[ 7.047715] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0x7bfebf58 3803[ 7.047769] [1: sh: 990] msm_eeprom_verify_sum: expect 0xb00b828, result 0xb00b828 3804[ 7.047815] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0xb00b828 3805[ 7.047857] [1: sh: 990] msm_eeprom_verify_sum: expect 0xda35a98e, result 0xda35a98e 3806[ 7.047901] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0xda35a98e 3807[ 7.047951] [1: sh: 990] msm_eeprom_verify_sum: expect 0x56e14759, result 0x56e14759 3808[ 7.047996] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0x56e14759 3809[ 7.048040] [1: sh: 990] msm_eeprom_verify_sum: expect 0xbcddb668, result 0xbcddb668 3810[ 7.048085] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0xbcddb668 3811[ 7.048126] [1: sh: 990] msm_eeprom_verify_sum: expect 0x7eedd920, result 0x7eedd920 3812[ 7.048171] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0x7eedd920 3813[ 7.048211] [1: sh: 990] msm_eeprom_verify_sum: expect 0xf95e6730, result 0xf95e6730 3814[ 7.048256] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0xf95e6730 3815[ 7.048298] [1: sh: 990] msm_eeprom_verify_sum: expect 0x1ac3bd6b, result 0x1ac3bd6b 3816[ 7.048342] [1: sh: 990] msm_eeprom_verify_sum: checksum pass 0x1ac3bd6b 3817[ 7.048382] [1: sh: 990] All CRC values are matched. 3818[ 7.048416] [1: sh: 990] rear_af_cal_pan: 197, rear_af_cal_macro: 421 3819[ 7.048455] [1: sh: 990] msm_camera_power_down:2442 3820[ 7.055421] [1: sh: 990] msm_camera_request_gpio_table:752 invalid gpio_tbl (null) / size 0 3821[ 7.055827] [1: sh: 990] msm_eeprom_spi_setup success result=0 supported=1ff X 3822[ 7.056151] [1: sh: 990] msm_eeprom_i2c_probe E 3823[ 7.056191] [1: sh: 990] msm_eeprom_i2c_probe client = 0xffffffc0f7dc7000 3824[ 7.056235] [1: sh: 990] cell-index/subdev_id 1, rc 0 3825[ 7.056269] [1: sh: 990] msm_eeprom_i2c_probe:1839 e_ctrl->eboard_info->i2c_slaveaddr = 0xa2 3826[ 7.056319] [1: sh: 990] msm_eeprom_i2c_probe qcom,eeprom-name m24128s, rc 0 3827[ 7.056393] [1: sh: 990] msm_eeprom_parse_memory_map::450 qcom,num-blocks 10 3828[ 7.056436] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 0 3829[ 7.056479] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 1 3830[ 7.056525] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 2 3831[ 7.056568] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 3 3832[ 7.056621] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 4 3833[ 7.056666] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 5 3834[ 7.056710] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 6 3835[ 7.056756] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 7 3836[ 7.056796] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 8 3837[ 7.056841] [1: sh: 990] msm_eeprom_parse_memory_map, 464: i = 9 3838[ 7.056888] [1: sh: 990] msm_eeprom_parse_memory_map::509 valid size = 13812 3839[ 7.056931] [1: sh: 990] msm_eeprom_parse_memory_map::515 qcom,total-size 15360 3840[ 7.056982] [1: sh: 990] msm_eeprom_parse_memory_map::520 set num_data as total-size in order to use same address at cal map(total : 15360, valid : 13812) 3841[ 7.057061] [1: sh: 990] msm_camera_power_up:1813 3842[ 7.057108] [1: sh: 990] msm_camera_pinctrl_init:1784 Getting pinctrl handle failed 3843[ 7.057159] [1: sh: 990] msm_camera_power_up:1825 Initialization of pinctrl failed 3844[ 7.057207] [1: sh: 990] msm_camera_request_gpio_table:752 invalid gpio_tbl (null) / size 0 3845[ 7.058151] [1: kworker/u8:2: 50] platform sys_mon.0: Driver sys_mon requests probe deferral 3846[ 7.103490] [0: init: 1] init: Service 'scs' (pid 960) exited with status 0 3847[ 7.110856] [1: sh: 990] msm_eeprom_match_id: front eeprom 3848[ 7.111360] [1: sh: 990] i2c-msm-v2 7576000.i2c: msm_bus_scale_register_client(mstr-id:86):0x21 (ok) 3849[ 7.112694] [1: sh: 990] msm_eeprom_match_id: read 0x00 0x01 0x00 0x00 3850[ 7.112742] [1: sh: 990] msm_eeprom_i2c_probe: Skip front read eeprom in probe func 3851[ 7.112789] [1: sh: 990] msm_camera_power_down:2442 3852[ 7.162416] [1: sh: 990] msm_camera_request_gpio_table:752 invalid gpio_tbl (null) / size 0 3853[ 7.162481] [1: sh: 990] msm_eeprom_i2c_probe qcom,sensor-position 1 3854[ 7.163530] [1: sh: 990] msm_eeprom_i2c_probe Front Cam e_ctrl->is_supported rc 1 3855[ 7.163584] [1: sh: 990] msm_eeprom_i2c_probe success result=0 X 3856[ 7.163913] [1: sh: 990] msm_eeprom_init_module:2028 probe succeed 3857[ 7.163969] [1: sh: 990] dhd_module_init in 3858[ 7.164995] [1: sh: 990] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4415(good PCI location) 3859[ 7.165054] [1: sh: 990] dhdpcie_init: found adapter info 'DHD generic adapter' 3860[ 7.165108] [1: sh: 990] alloc static buf at ffffffc0e66c0000! 3861[ 7.165441] [1: sh: 990] pcieh 0000:01:00.0: enabling device (0000 -> 0002) 3862[ 7.166898] [1: kworker/u8:9: 946] platform sys_mon.0: Driver sys_mon requests probe deferral 3863[ 7.183691] [1: sh: 990] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000 3864[ 7.183897] [1: sh: 990] CFG80211-INFO2) wl_setup_wiphy : Registering Vendor80211 3865[ 7.184755] [1: sh: 990] CFG80211-INFO2) wl_alloc_netinfo : alloc_netinfo enter bssidx=0 wdev=ffffffc01a9c7800 ndev=ffffffc0e5b18000 3866[ 7.184869] [1: sh: 990] CFG80211-INFO2) wl_alloc_netinfo : alloc_netinfo exit iface_cnt=1 3867[ 7.225319] [0: init: 1] init: Starting service 'qmuxd'... 3868[ 7.227116] [2: sh: 1156] macloader: Not yet wlan interface loaded 3869[ 7.241445] [1: sh: 990] wl_create_event_handler(): thread:wl_event_handler:480 started 3870[ 7.241713] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3871[ 7.241781] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3872[ 7.241832] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3873[ 7.241890] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3874[ 7.241935] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3875[ 7.242005] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3876[ 7.242454] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3877[ 7.242541] [1: sh: 990] p2p0: P2P Interface Registered 3878[ 7.242676] [1: sh: 990] dhd_init_logstrs_array: Failed to open the file /root/logstrs.bin 3879[ 7.242742] [1: sh: 990] CFG80211-INFO2) wl_event_handler : 3880[ 7.242778] [1: sh: 990] dhd_read_map: Failed to open /root/rtecdc.map 3881[ 7.242819] [1: sh: 990] readmap error 0X0 3882[ 7.242849] [1: sh: 990] readmap Error!! 3883[ 7.242878] [0:wl_event_handle: 1152] tsk Enter, tsk = 0xffffffc0e5af6c90 3884[ 7.242922] [1: sh: 990] dhd_read_map: Failed to open /root/roml.map 3885[ 7.242980] [1: sh: 990] readmap error 0X0 3886[ 7.243010] [1: sh: 990] readmap Error!! 3887[ 7.274786] [1: sh: 990] dhd_attach(): thread:dhd_watchdog_thread:48d started 3888[ 7.291013] [1: sh: 990] dhd_attach(): thread:dhd_rpm_state_thread:490 started 3889[ 7.291070] [1: sh: 990] dhd_deferred_work_init: work queue initialized 3890[ 7.291117] [1: sh: 990] DHD LOAD BALANCING Enabled 3891[ 7.291515] [1: sh: 990] Dongle Host Driver, version 1.363.59.154 (r) 3892[ 7.291515] [1: sh: 990] Compiled in drivers/net/wireless/bcmdhd4359 on Sep 9 2016 at 15:03:50 3893[ 7.291628] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3894[ 7.292317] [1: sh: 990] CFG80211-INFO2) wl_cfg80211_netdev_notifier_call : Enter 3895[ 7.292392] [1: sh: 990] Register interface [wlan0] MAC: 00:40:37 3896[ 7.292392] [1: sh: 990] 3897[ 7.292491] [0:wl_event_handle: 1152] CFG80211-INFO2) wl_event_handler : was terminated 3898[ 7.293371] [1: sh: 990] wl_destroy_event_handler(): thread:wl_event_handler:480 terminated OK 3899[ 7.293429] [1: sh: 990] dhd_wl_ioctl: returning as busstate=0 3900[ 7.293471] [1: sh: 990] dhd_bus_devreset: == Power OFF == 3901[ 7.293519] [1: sh: 990] dhdpcie_oob_intr_unregister: irq is not registered 3902[ 7.300111] [1: sh: 990] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC0. 3903[ 7.301489] [1: sh: 990] dhd_bus_devreset: WLAN OFF Done 3904[ 7.301539] [1: sh: 990] wifi_platform_set_power = 0 3905[ 7.301578] [1: sh: 990] ------------------------------------------------ 3906[ 7.301619] [1: sh: 990] ------------------------------------------------ 3907[ 7.301660] [1: sh: 990] dhd_wlan_power Enter: power off 3908[ 7.353611] [0: init: 1] init: cannot find '/system/bin/ipacm-diag', disabling 'ipacm-diag' 3909[ 7.393393] [0: init: 1] init: Service 'prepare_param' (pid 646) exited with status 0 3910[ 7.398683] [2: keystore: 985] QSEECOM: qseecom_load_app: App (skeymast) does'nt exist, loading apps for first time 3911[ 7.410339] [1: sh: 990] dhd_module_init out 3912[ 7.410858] [1: kworker/u8:10: 1142] platform sys_mon.0: Driver sys_mon requests probe deferral 3913[ 7.412047] [1: sh: 990] Freeing unused kernel memory: 5980K (ffffffc001476000 - ffffffc001a4d000) 3914[ 7.412111] [1: sh: 990] Freeing alternatives memory: 28K (ffffffc001a4d000 - ffffffc001a54000) 3915[ 7.418125] [0: init: 1] init: Service 'sec-sh' (pid 990) exited with status 0 3916[ 7.446734] [0: init: 1] init: Starting service 'ipacm'... 3917[ 7.473031] [0: init: 1] init: Service 'defaultcrypto' (pid 668) exited with status 0