1# SPDX-License-Identifier: GPL-2.0-only 2 3ifneq ($(NOCOMPILE),1) 4GIT:=$(shell git -C "$(top)" rev-parse --git-dir 1>/dev/null 2>&1 \ 5 && command -v git) 6else 7GIT:= 8endif 9 10####################################################################### 11# normalize Kconfig variables in a central place 12CONFIG_CBFS_PREFIX:=$(call strip_quotes,$(CONFIG_CBFS_PREFIX)) 13CONFIG_FMDFILE:=$(call strip_quotes,$(CONFIG_FMDFILE)) 14CONFIG_DEVICETREE:=$(call strip_quotes, $(CONFIG_DEVICETREE)) 15CONFIG_OVERRIDE_DEVICETREE:=$(call strip_quotes, $(CONFIG_OVERRIDE_DEVICETREE)) 16CONFIG_CHIPSET_DEVICETREE:=$(call strip_quotes, $(CONFIG_CHIPSET_DEVICETREE)) 17CONFIG_MEMLAYOUT_LD_FILE:=$(call strip_quotes, $(CONFIG_MEMLAYOUT_LD_FILE)) 18 19####################################################################### 20# misleadingly named, this is the coreboot version 21ifeq ($(KERNELVERSION),) 22ifeq ($(BUILD_TIMELESS),1) 23KERNELVERSION := -TIMELESS--LESSTIME- 24else 25KERNELVERSION := $(strip $(if $(GIT),\ 26 $(shell git describe --abbrev=12 --dirty --always || git describe),\ 27 $(if $(wildcard $(top)/.coreboot-version),\ 28 $(shell cat $(top)/.coreboot-version),\ 29 coreboot-unknown$(KERNELREVISION)))) 30endif 31endif 32COREBOOT_EXPORTS += KERNELVERSION 33 34####################################################################### 35# Basic component discovery 36MAINBOARDDIR=$(call strip_quotes,$(CONFIG_MAINBOARD_DIR)) 37VARIANT_DIR:=$(call strip_quotes,$(CONFIG_VARIANT_DIR)) 38CARRIER_DIR:=$(call strip_quotes,$(CONFIG_CARRIER_DIR)) 39COREBOOT_EXPORTS += MAINBOARDDIR VARIANT_DIR CARRIER_DIR 40 41## Final build results, which CBFSTOOL uses to create the final 42## rom image file, are placed under $(objcbfs). 43## These typically have suffixes .debug .elf .bin and .map 44objcbfs := $(obj)/cbfs/$(CONFIG_CBFS_PREFIX) 45additional-dirs += $(objcbfs) 46COREBOOT_EXPORTS += objcbfs 47 48## Based on the active configuration, Makefile conditionally collects 49## the required assembly includes and saves them in a file. 50## Such files that do not have a clear one-to-one relation to a source 51## file under src/ are placed and built under $(objgenerated) 52objgenerated := $(obj)/generated 53additional-dirs += $(objgenerated) 54COREBOOT_EXPORTS += objgenerated 55 56## CCACHE_EXTRAFILES can be set by individual rules to help CCACHE 57## discover dependencies it might not notice on its own (e.g. asm (".incbin")). 58COREBOOT_EXPORTS += CCACHE_EXTRAFILES 59 60####################################################################### 61# root rule to resolve if in build mode (ie. configuration exists) 62real-target: $(obj)/config.h coreboot files_added show_coreboot show_notices 63coreboot: $(obj)/coreboot.rom $(obj)/cbfstool $(obj)/rmodtool $(obj)/ifwitool $(obj)/cse_fpt $(obj)/cse_serger 64 65# This target can be used to run scripts or additional targets 66# after the build completes by creating a target named 'build_complete::' 67.PHONY: build_complete 68build_complete:: | coreboot 69 70# This target can be used to run rules after all files were added to CBFS, 71# for example to process FMAP regions or the entire image. 72.PHONY: files_added 73files_added:: | build_complete 74 75# This target should come just before the show_notices target. If there 76# are no notices, the build should finish with the text of what was just 77# built. 78.PHONY: show_coreboot 79show_coreboot: | files_added 80 $(CBFSTOOL) $(obj)/coreboot.rom print -r $(subst $(spc),$(comma),$(all-regions)) 81 printf "\nBuilt %s (%s)\n" $(MAINBOARDDIR) $(CONFIG_MAINBOARD_PART_NUMBER) 82 if [ -f "$(CCACHE_STATSLOG)" ]; then \ 83 printf "\nccache statistics\n"; \ 84 $(CCACHE) --show-log-stats -v; \ 85 fi 86 87# This is intended to run at the *very end* of the build to show warnings 88# notices and the like. If another target needs to be added, add it 89# BEFORE this target. 90.PHONY: show_notices 91show_notices:: | show_coreboot 92 93# This rule allows the site-local makefile to run before starting the actual 94# coreboot build. It should not be used in the regular coreboot makefiles. 95# Note: This gets run after the immediate makefile code like updating the 96# submodules, but before any other targets. 97.PHONY: site-local-target 98site-local-target:: 99 100####################################################################### 101# our phony targets 102PHONY+= clean-abuild coreboot check-style build_complete 103 104####################################################################### 105# root source directories of coreboot 106# site-local Makefile.mk must go first to override default locations (for binaries etc.) 107subdirs-y := site-local 108 109subdirs-y += src/lib src/commonlib/ src/console src/device src/acpi src/superio/common 110subdirs-$(CONFIG_EC_ACPI) += src/ec/intel 111subdirs-y += src/ec/acpi $(wildcard src/ec/*/*) $(wildcard src/southbridge/*/*) 112subdirs-y += $(wildcard src/soc/*) $(wildcard src/soc/*/common) $(filter-out $(wildcard src/soc/*/common),$(wildcard src/soc/*/*)) 113subdirs-y += $(wildcard src/northbridge/*/*) 114subdirs-y += $(filter-out src/superio/common,$(wildcard src/superio/*)) $(wildcard src/superio/*/*) 115subdirs-y += $(wildcard src/drivers/*) $(wildcard src/drivers/*/*) $(wildcard src/drivers/*/*/*) 116subdirs-y += src/cpu src/vendorcode 117subdirs-y += util/cbfstool util/sconfig util/nvramtool util/pgtblgen util/amdfwtool 118subdirs-y += util/futility util/marvell util/bincfg util/supermicro util/qemu 119subdirs-y += util/ifdtool 120subdirs-y += $(wildcard src/arch/*) 121subdirs-y += src/mainboard/$(MAINBOARDDIR) 122subdirs-y += src/security 123subdirs-y += payloads payloads/external 124subdirs-$(CONFIG_SBOM) += src/sbom 125subdirs-y += util/checklist util/testing 126 127####################################################################### 128# Add source classes and their build options 129classes-y := ramstage romstage bootblock decompressor postcar smm smmstub cpu_microcode verstage 130 131# Add a special 'all' class to add sources to all stages 132$(call add-special-class,all) 133all-handler = $(foreach class,bootblock verstage romstage postcar ramstage,$(eval $(class)-y += $(2))) 134 135$(call add-special-class,all_x86) 136all_x86-handler = $(foreach class,bootblock verstage_x86 romstage postcar ramstage,$(eval $(class)-y += $(2))) 137 138$(call add-special-class,verstage_x86) 139ifeq ($(CONFIG_ARCH_VERSTAGE_X86_32)$(CONFIG_ARCH_VERSTAGE_X86_64),y) 140verstage_x86-handler = $(eval verstage-y += $(2)) 141else 142verstage_x86-handler = 143endif 144 145# Add dynamic classes for rmodules 146$(foreach supported_arch,$(ARCH_SUPPORTED), \ 147 $(eval $(call define_class,rmodules_$(supported_arch),$(supported_arch)))) 148# Provide a macro to determine environment for free standing rmodules. 149$(foreach supported_arch,$(ARCH_SUPPORTED), \ 150 $(eval rmodules_$(supported_arch)-generic-ccopts += -D__RMODULE__)) 151 152####################################################################### 153# Helper functions for math, strings, and various file placement matters. 154# macros work on all formats understood by printf(1) 155# values are space separated if using more than one value 156# 157# int-add: adds an arbitrary length list of integers 158# int-subtract: subtracts the second of two integers from the first 159# int-multiply: multiplies an arbitrary length list of integers 160# int-divide: divides the first integer by the second 161# int-remainder: arithmetic remainder of the first number divided by the second 162# int-shift-left: Shift $1 left by $2 bits 163# int-lt: 1 if the first value is less than the second. 0 otherwise 164# int-gt: 1 if the first values is greater than the second. 0 otherwise 165# int-eq: 1 if the two values are equal. 0 otherwise 166# int-align: align $1 to $2 units 167# file-size: returns the filesize of the given file 168# tolower: returns the value in all lowercase 169# toupper: returns the value in all uppercase 170# ws_to_under: returns the value with any whitespace changed to underscores 171# get_fmap_value returns the value of a given FMAP field from fmap_config.h 172_toint=$(shell printf "%d" $1) 173_tohex=$(shell printf 0x"%x" $1) 174_int-add2=$(shell expr $(call _toint,$1) + $(call _toint,$2)) 175int-add=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-add,$(call _int-add2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1))) 176int-subtract=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) - $(call _toint,$(word 2,$1)))) 177_int-multiply2=$(shell expr $(call _toint,$1) \* $(call _toint,$2)) 178int-multiply=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-multiply,$(call _int-multiply2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1))) 179int-divide=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) / $(call _toint,$(word 2,$1)))) 180int-remainder=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) % $(call _toint,$(word 2,$1)))) 181int-shift-left=$(shell echo -n $$(($(call _toint,$(word 1, $1)) << $(call _toint,$(word 2, $1))))) 182int-lt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \< $(call _toint,$(word 2,$1)))) 183int-gt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \> $(call _toint,$(word 2,$1)))) 184int-eq=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) = $(call _toint,$(word 2,$1)))) 185int-align=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A + \( \( $$B - \( $$A % $$B \) \) % $$B \) ) 186int-align-down=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A - \( $$A % $$B \) ) 187file-size=$(strip $(shell wc -c "$1" | cut -f 1 -d ' ')) 188tolower=$(shell echo '$1' | tr '[:upper:]' '[:lower:]') 189toupper=$(shell echo '$1' | tr '[:lower:]' '[:upper:]') 190ws_to_under=$(shell echo '$1' | tr ' \t' '_') 191get_fmap_value=$(shell awk '$$2 == "$1" {print $$3}' $(obj)/fmap_config.h) 192 193####################################################################### 194# Helper functions for ramstage postprocess 195spc := 196spc := $(spc) $(spc) 197comma := , 198 199# Returns all files and dirs below `dir` (recursively). 200# files-below-dir,dir,files 201files-below-dir=$(filter $(1)%,$(2)) 202 203# Returns all dirs below `dir` (recursively). 204# dirs-below-dir,dir,files 205dirs-below-dir=$(filter-out $(1),$(sort $(dir $(call files-below-dir,$(1),$(2))))) 206 207# Returns all files directly in `dir` (non-recursively). 208# files-in-dir,dir,files 209files-in-dir=$(filter-out $(addsuffix %,$(call dirs-below-dir,$(1),$(2))),$(call files-below-dir,$(1),$(2))) 210 211####################################################################### 212# reduce command line length by linking the objects of each 213# directory into an intermediate file 214ramstage-postprocess=$$(eval DEPENDENCIES+=$$(addsuffix .d,$$(basename $(1)))) \ 215 $(foreach d,$(sort $(dir $(filter-out %.ld,$(1)))), \ 216 $(eval $(d)ramstage.a: $(call files-in-dir,$(d),$(filter-out %.ld,$(1))); rm -f $$@ && $(AR_ramstage) rcsT $$@ $$^ ) \ 217 $(eval ramstage-objs:=$(d)ramstage.a $(filter-out $(filter-out %.ld, $(call files-in-dir,$(d),$(1))),$(ramstage-objs)))) 218 219decompressor-generic-ccopts += -D__DECOMPRESSOR__ 220bootblock-generic-ccopts += -D__BOOTBLOCK__ 221romstage-generic-ccopts += -D__ROMSTAGE__ 222ramstage-generic-ccopts += -D__RAMSTAGE__ 223ifeq ($(CONFIG_COVERAGE),y) 224ramstage-c-ccopts += -fprofile-arcs -ftest-coverage 225endif 226ifneq ($(GIT),) 227ifneq ($(UPDATED_SUBMODULES),1) 228$(info Updating git submodules.) 229# try to fetch non-optional submodules if the source is under git 230forgetthis:=$(shell git submodule update --init $(quiet_errors)) 231# Checkout Cmocka repository 232forgetthis:=$(shell git submodule update --init --checkout 3rdparty/cmocka $(quiet_errors)) 233ifeq ($(CONFIG_USE_BLOBS),y) 234# These items are necessary because each has update=none in .gitmodules. They are ignored 235# until expressly requested and enabled with --checkout 236forgetthis:=$(shell git submodule update --init --checkout 3rdparty/blobs $(quiet_errors)) 237forgetthis:=$(shell git submodule update --init --checkout 3rdparty/intel-microcode $(quiet_errors)) 238ifeq ($(CONFIG_FSP_USE_REPO),y) 239forgetthis:=$(shell git submodule update --init --checkout 3rdparty/fsp $(quiet_errors)) 240endif 241ifeq ($(CONFIG_USE_AMD_BLOBS),y) 242forgetthis:=$(shell git submodule update --init --checkout 3rdparty/amd_blobs $(quiet_errors)) 243endif 244ifeq ($(CONFIG_USE_QC_BLOBS),y) 245forgetthis:=$(shell git submodule update --init --checkout 3rdparty/qc_blobs $(quiet_errors)) 246endif 247endif 248UPDATED_SUBMODULES:=1 249COREBOOT_EXPORTS += UPDATED_SUBMODULES 250 251endif 252endif # GIT != "" 253 254postcar-c-deps:=$$(OPTION_TABLE_H) 255ramstage-c-deps:=$$(OPTION_TABLE_H) 256romstage-c-deps:=$$(OPTION_TABLE_H) 257verstage-c-deps:=$$(OPTION_TABLE_H) 258bootblock-c-deps:=$$(OPTION_TABLE_H) 259$(foreach type,ads adb, \ 260 $(foreach stage,$(COREBOOT_STANDARD_STAGES), \ 261 $(eval $(stage)-$(type)-deps := \ 262 $(obj)/$(stage)/$(notdir $(KCONFIG_AUTOADS)) \ 263 $(obj)/libgnat-$(ARCH-$(stage)-y)/libgnat.a))) 264 265# Add handler to copy linker scripts 266define generic-objs_ld_template_gen 267de$(EMPTY)fine $(1)-objs_ld_template 268$$(call src-to-obj,$1,$$(1).ld): $$(1).ld $(obj)/config.h $(obj)/fmap_config.h 269 @printf " CP $$$$(subst $$$$(obj)/,,$$$$(@))\n" 270 $$(CC_$(1)) -MMD $$(CPPFLAGS_$(1)) $$($(1)-ld-ccopts) $(PREPROCESS_ONLY) -include $(obj)/config.h -MT $$$$@ -o $$$$@ $$$$< 271en$(EMPTY)def 272endef 273 274# Add handler to deal with archives 275define generic-objs_a_template_gen 276de$(EMPTY)fine $(1)-objs_a_template 277$$(call src-to-obj,$1,$$(1).a): $$(1).a 278 @printf " AR $$$$(subst $$$$(obj)/,,$$$$(@))\n" 279 $$$$(AR_$(1)) rcsT $$$$@.tmp $$$$< 280 mv $$$$@.tmp $$$$@ 281en$(EMPTY)def 282endef 283 284# Add handler to add no rules for manual files 285define generic-objs_manual_template_gen 286# do nothing 287endef 288 289####################################################################### 290# Add handler to compile ACPI's ASL 291# arg1: base file name 292# arg2: y or n for including in cbfs. defaults to y 293 294# Empty resource templates were marked as a warning in IASL with the comment 295# "This would appear to be worthless in real-world ASL code.", which is 296# possibly true in many cases. In other cases it seems that an empty 297# ResourceTemplate is the correct code. 298# As it's valid ASL, disable the warning. 299EMPTY_RESOURCE_TEMPLATE_WARNING = 3150 300 301IASL_WARNINGS_LIST = $(EMPTY_RESOURCE_TEMPLATE_WARNING) 302 303IGNORED_IASL_WARNINGS = $(addprefix -vw , $(IASL_WARNINGS_LIST)) 304 305define asl_template 306$(CONFIG_CBFS_PREFIX)/$(1).aml-file = $(obj)/$(1).aml 307$(CONFIG_CBFS_PREFIX)/$(1).aml-type = raw 308$(CONFIG_CBFS_PREFIX)/$(1).aml-compression = none 309ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_LPC_SPI_DMA),y) 310$(CONFIG_CBFS_PREFIX)/$(1).aml-align = 64 311endif 312cbfs-files-$(if $(2),$(2),y) += $(CONFIG_CBFS_PREFIX)/$(1).aml 313$(eval DEPENDENCIES += $(obj)/$(1).d) 314$(obj)/$(1).aml: $(src)/mainboard/$(MAINBOARDDIR)/$(1).asl $(obj)/config.h 315 @printf " IASL $$(subst $(top)/,,$$(@))\n" 316 $(CC_ramstage) -x assembler-with-cpp -E -MMD -MT $$(@) $$(CPPFLAGS_ramstage) -D__ACPI__ -P -include $(src)/include/kconfig.h -I$(obj) -I$(src) -I$(src)/include -I$(src)/arch/$(ARCHDIR-$(ARCH-ramstage-y))/include -I$(src)/mainboard/$(MAINBOARDDIR) $$< -o $(obj)/$(1).asl 317 cd $$(dir $$@); $(IASL) $(IGNORED_IASL_WARNINGS) -we -p $$(notdir $$@) $(1).asl 318 echo " IASL "$(IASL_WARNINGS_LIST)" warning types were ignored!" 319 if ! $(IASL) -d $$@ 2>&1 | grep -Eq 'ACPI (Warning|Error)'; then \ 320 echo " IASL $$@ disassembled correctly."; \ 321 true; \ 322 else \ 323 echo "Error: Could not correctly disassemble $$@"; \ 324 $(IASL) -d $$@; \ 325 false; \ 326 fi 327endef 328 329####################################################################### 330# Parse plaintext CMOS defaults into binary format 331# arg1: source file 332# arg2: binary file name 333cbfs-files-processor-nvramtool= \ 334 $(eval $(2): $(1) $(top)/$(call strip_quotes,$(CONFIG_CMOS_LAYOUT_FILE)) | $(objutil)/nvramtool/nvramtool ; \ 335 printf " CREATE $(2) (from $(1))\n"; \ 336 $(objutil)/nvramtool/nvramtool -y $(top)/$(call strip_quotes,$(CONFIG_CMOS_LAYOUT_FILE)) -D $(2).tmp -p $(1) && \ 337 mv $(2).tmp $(2)) 338 339####################################################################### 340# Reduce a .config file by removing lines about default unset booleans 341# arg1: input 342# arg2: output 343define cbfs-files-processor-config 344 $(eval $(2): $(1) $(obj)/build.h $(objutil)/kconfig/conf; \ 345 +printf " CREATE $(2) (from $(1))\n"; \ 346 printf "# This image was built using coreboot " > $(2).tmp && \ 347 grep "\<COREBOOT_VERSION\>" $(obj)/build.h |cut -d\" -f2 >> $(2).tmp && \ 348 $(MAKE) DOTCONFIG=$(1) DEFCONFIG=$(2).tmp2 savedefconfig && \ 349 cat $(2).tmp2 >> $(2).tmp && \ 350 printf "# End of defconfig. Derivable values start here.\n" >> $(2).tmp && \ 351 grep "^CONFIG" $(1) | grep -F -v -f $(2).tmp2 >> $(2).tmp && \ 352 rm -f $(2).tmp2 && \ 353 mv -f $(2).tmp $(2)) 354endef 355 356####################################################################### 357# Add a file to CBFS with just type and compression values 358# arg1: name in CBFS 359# arg2: filename and path 360# arg3: type in CBFS 361# arg4: compression type 362define add-cbfs-file-simple 363 $(eval cbfs-files-y += $(1)) 364 $(eval $(1)-file := $(2)) 365 $(eval $(1)-type := $(3)) 366 $(eval $(1)-compression := $(4)) 367endef 368 369####################################################################### 370# Compile a C file with a bare struct definition into binary 371# arg1: C source file 372# arg2: binary file 373cbfs-files-processor-struct= \ 374 $(eval $(2): $(1) $(obj)/build.h $(obj)/fmap_config.h $(KCONFIG_AUTOHEADER); \ 375 printf " CC+STRIP $(1)\n"; \ 376 $(CC_ramstage) -MMD $(CPPFLAGS_ramstage) $(CFLAGS_ramstage) --param asan-globals=0 $$(ramstage-c-ccopts) -include $(KCONFIG_AUTOHEADER) -MT $(2) -o $(2).tmp -c $(1) && \ 377 $(OBJCOPY_ramstage) -O binary --only-section='.*data*' --only-section='.*bss*' \ 378 --set-section-flags .*bss*=alloc,contents,load $(2).tmp $(2); \ 379 rm -f $(2).tmp) \ 380 $(eval DEPENDENCIES += $(2).d) 381 382####################################################################### 383# Convert image to YCC 4:2:0 JPEG 384# 385# In two steps: 386# 1. Convert to RGB colors, optionally resize and store as BMP. 387# 2. Round final size to multiples of 16, optionally swap colors, 388# convert (back) to sRGB and store as JPEG. 389# The split is necessary because we don't know the exact, scaled 390# size due to aspect-ratio. Note: IM v7 would allow us to do the 391# calculations in one command using %[fx:...] syntax. 392# 393# arg1: image input file 394# arg2: output jpg 395cbfs-files-processor-jpg420= \ 396 $(eval $(2): $(1) $(KCONFIG_AUTOCONFIG); \ 397 printf " CONVERT $$<\n"; \ 398 res=$(CONFIG_BOOTSPLASH_CONVERT_RESOLUTION); \ 399 res=$$$$(convert $$< \ 400 -colorspace RGB \ 401 $$(BOOTSPLASH_RESIZE-y) \ 402 -format '%wx%h' -write info: \ 403 bmp:$$@); \ 404 convert $$@ \ 405 $$(BOOTSPLASH_ROUND16) \ 406 $$(BOOTSPLASH_COLORSWAP-y) \ 407 -colorspace sRGB \ 408 -quality $$(CONFIG_BOOTSPLASH_CONVERT_QUALITY)% \ 409 -interlace none -colorspace YCC -sampling-factor 4:2:0 \ 410 jpg:$$@) 411BOOTSPLASH_FLOOR = $$(($${res%%x*} & ~15))x$$(($${res\#\#*x} & ~15)) 412BOOTSPLASH_RESIZE-$(CONFIG_BOOTSPLASH_CONVERT_RESIZE) = -resize $(BOOTSPLASH_FLOOR) 413BOOTSPLASH_CEIL = $$((($${res%%x*} + 15) & ~15))x$$((($${res\#\#*x} + 15) & ~15)) 414BOOTSPLASH_ROUND16 = -background black -gravity center -extent $(BOOTSPLASH_CEIL) 415BOOTSPLASH_COLORSWAP-$(CONFIG_BOOTSPLASH_CONVERT_COLORSWAP) := -channel-fx 'red<=>blue' 416 417####################################################################### 418# Add handler for arbitrary files in CBFS 419$(call add-special-class,cbfs-files) 420cbfs-files-handler= \ 421 $(eval tmp-cbfs-method:=$(word 2, $(subst :, ,$($(2)-file)))) \ 422 $(eval $(2)-file:=$(call strip_quotes,$(word 1, $(subst :, ,$($(2)-file))))) \ 423 $(eval tmp-cbfs-file:= ) \ 424 $(if $($(2)-file), \ 425 $(if $(wildcard $(1)$($(2)-file)), \ 426 $(eval tmp-cbfs-file:= $(wildcard $(1)$($(2)-file))), \ 427 $(eval tmp-cbfs-file:= $($(2)-file)))) \ 428 $(if $(strip $($(2)-required)), \ 429 $(if $(wildcard $(tmp-cbfs-file)),, \ 430 $(info This build configuration requires $($(2)-required)) \ 431 $(eval FAILBUILD:=1) \ 432 )) \ 433 $(if $(strip $($(2)-align)), \ 434 $(if $(strip $($(2)-position)), \ 435 $(info ERROR: It is not allowed to specify both alignment and position for $($(2)-file)) \ 436 $(eval FAILBUILD:=1) \ 437 )) \ 438 $(if $(tmp-cbfs-method), \ 439 $(eval tmp-old-cbfs-file:=$(tmp-cbfs-file)) \ 440 $(eval tmp-cbfs-file:=$(shell mkdir -p $(obj)/mainboard/$(MAINBOARDDIR); mktemp $(obj)/mainboard/$(MAINBOARDDIR)/cbfs-file.XXXXXX).out) \ 441 $(call cbfs-files-processor-$(tmp-cbfs-method),$(tmp-old-cbfs-file),$(tmp-cbfs-file))) \ 442 $(if $(tmp-cbfs-file), \ 443 $(eval cbfs-files += $(subst $(spc),*,$(tmp-cbfs-file)|$(2)|$($(2)-type)|$($(2)-compression)|$(strip $($(2)-position))|$($(2)-align)|$($(2)-options)))) \ 444 $(eval $(2)-name:=) \ 445 $(eval $(2)-type:=) \ 446 $(eval $(2)-compression:=) \ 447 $(eval $(2)-position:=) \ 448 $(eval $(2)-required:=) \ 449 $(eval $(2)-options:=) \ 450 $(eval $(2)-align:=) 451 452####################################################################### 453# a variety of flags for our build 454CBFS_COMPRESS_FLAG:=none 455ifeq ($(CONFIG_COMPRESS_RAMSTAGE_LZMA),y) 456CBFS_COMPRESS_FLAG:=LZMA 457endif 458ifeq ($(CONFIG_COMPRESS_RAMSTAGE_LZ4),y) 459CBFS_COMPRESS_FLAG:=LZ4 460endif 461 462CBFS_PAYLOAD_COMPRESS_FLAG:=none 463ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y) 464CBFS_PAYLOAD_COMPRESS_FLAG:=LZMA 465endif 466ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZ4),y) 467CBFS_PAYLOAD_COMPRESS_FLAG:=LZ4 468endif 469 470CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG:=none 471ifeq ($(CONFIG_COMPRESS_SECONDARY_PAYLOAD),y) 472CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG:=LZMA 473endif 474 475CBFS_PRERAM_COMPRESS_FLAG:=none 476ifeq ($(CONFIG_COMPRESS_PRERAM_STAGES),y) 477CBFS_PRERAM_COMPRESS_FLAG:=LZ4 478endif 479 480ifneq ($(CONFIG_LOCALVERSION),"") 481COREBOOT_EXTRA_VERSION := -$(call strip_quotes,$(CONFIG_LOCALVERSION)) 482COREBOOT_EXPORTS += COREBOOT_EXTRA_VERSION 483endif 484 485CPPFLAGS_common := -Isrc 486CPPFLAGS_common += -Isrc/include 487CPPFLAGS_common += -Isrc/commonlib/include 488CPPFLAGS_common += -Isrc/commonlib/bsd/include 489CPPFLAGS_common += -I$(obj) 490VBOOT_SOURCE ?= 3rdparty/vboot 491CPPFLAGS_common += -I$(VBOOT_SOURCE)/firmware/include 492CPPFLAGS_common += -include $(src)/include/kconfig.h 493CPPFLAGS_common += -include $(src)/include/rules.h 494CPPFLAGS_common += -include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h 495CPPFLAGS_common += -I3rdparty 496CPPFLAGS_common += -D__BUILD_DIR__=\"$(obj)\" 497CPPFLAGS_common += -D__COREBOOT__ 498 499ifeq ($(BUILD_TIMELESS),1) 500CPPFLAGS_common += -D__TIMELESS__ 501endif 502 503ifeq ($(CONFIG_PCI_OPTION_ROM_RUN_YABEL)$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE),y) 504CPPFLAGS_ramstage += -Isrc/device/oprom/include 505endif 506 507CFLAGS_common += -pipe 508CFLAGS_common += -g 509CFLAGS_common += -nostdinc 510CFLAGS_common += -std=gnu11 511CFLAGS_common += -nostdlib 512CFLAGS_common += -Wall 513CFLAGS_common += -Wundef 514CFLAGS_common += -Wstrict-prototypes 515CFLAGS_common += -Wmissing-prototypes 516CFLAGS_common += -Wwrite-strings 517CFLAGS_common += -Wredundant-decls 518CFLAGS_common += -Wno-trigraphs 519CFLAGS_common += -Wimplicit-fallthrough 520CFLAGS_common += -Wshadow 521CFLAGS_common += -Wdate-time 522CFLAGS_common += -Wtype-limits 523CFLAGS_common += -Wvla 524CFLAGS_common += -Wold-style-definition 525CFLAGS_common += -Wdangling-else 526CFLAGS_common += -Wmissing-include-dirs 527CFLAGS_common += -fno-common 528CFLAGS_common += -ffreestanding 529CFLAGS_common += -fno-builtin 530CFLAGS_common += -fomit-frame-pointer 531CFLAGS_common += -fstrict-aliasing 532CFLAGS_common += -ffunction-sections 533CFLAGS_common += -fdata-sections 534CFLAGS_common += -fno-pie 535CFLAGS_common += -Wstring-compare 536ifeq ($(CONFIG_COMPILER_GCC),y) 537CFLAGS_common += -Wold-style-declaration 538CFLAGS_common += -Wcast-function-type 539# Don't add these GCC specific flags when running scan-build 540ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),) 541CFLAGS_common += -Wno-packed-not-aligned 542CFLAGS_common += -fconserve-stack 543CFLAGS_common += -Wnull-dereference 544CFLAGS_common += -Wlogical-op 545CFLAGS_common += -Wduplicated-cond 546CFLAGS_common += -Wno-array-compare 547endif 548endif 549 550ADAFLAGS_common += -gnatp 551ADAFLAGS_common += -Wuninitialized 552ADAFLAGS_common += -Wall 553ADAFLAGS_common += -Werror 554ADAFLAGS_common += -pipe 555ADAFLAGS_common += -g 556ADAFLAGS_common += -nostdinc 557ADAFLAGS_common += -Wstrict-aliasing 558ADAFLAGS_common += -Wshadow 559ADAFLAGS_common += -fno-common 560ADAFLAGS_common += -fomit-frame-pointer 561ADAFLAGS_common += -ffunction-sections 562ADAFLAGS_common += -fdata-sections 563ADAFLAGS_common += -fno-pie 564# Ada warning options: 565# 566# a Activate most optional warnings. 567# .e Activate every optional warnings. 568# e Treat warnings and style checks as errors. 569# 570# D Suppress warnings on implicit dereferences: 571# As SPARK does not accept access types we have to map the 572# dynamically chosen register locations to a static SPARK 573# variable. 574# 575# .H Suppress warnings on holes/gaps in records: 576# We are modelling hardware here! 577# 578# H Suppress warnings on hiding: 579# It's too annoying, you run out of ideas for identifiers fast. 580# 581# T Suppress warnings for tracking of deleted conditional code: 582# We use static options to select code paths at compile time. 583# 584# U Suppress warnings on unused entities: 585# Would have lots of warnings for unused register definitions, 586# `withs` for debugging etc. 587# 588# .U Deactivate warnings on unordered enumeration types: 589# As SPARK doesn't support `pragma Ordered` by now, we don't 590# use that, yet. 591# 592# .W Suppress warnings on unnecessary Warnings Off pragmas: 593# Things get really messy when you use different compiler 594# versions, otherwise. 595# .Y Disable information messages for why package spec needs body: 596# Those messages are annoying. But don't forget to enable those, 597# if you need the information. 598ADAFLAGS_common += -gnatwa.eeD.HHTU.U.W.Y 599# Disable style checks for now 600ADAFLAGS_common += -gnatyN 601 602LDFLAGS_common := --gc-sections 603LDFLAGS_common += -nostdlib 604LDFLAGS_common += --nmagic 605LDFLAGS_common += -static 606 607# Workaround for RISC-V linker bug, merge back into above line when fixed. 608# https://sourceware.org/bugzilla/show_bug.cgi?id=27180 609ifneq ($(CONFIG_ARCH_RISCV),y) 610LDFLAGS_common += --emit-relocs 611endif 612 613ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y) 614CFLAGS_common += -Werror 615endif 616ifneq ($(GDB_DEBUG),) 617CFLAGS_common += -Og 618ADAFLAGS_common += -Og 619else 620CFLAGS_common += -Os 621ADAFLAGS_common += -Os 622endif 623 624ifeq ($(CONFIG_DEBUG_ADA_CODE),y) 625ADAFLAGS_common += -gnata 626endif 627 628additional-dirs += $(objutil)/cbfstool $(objutil)/ifdtool \ 629 $(objutil)/options $(objutil)/amdfwtool \ 630 $(objutil)/cbootimage 631 632export $(COREBOOT_EXPORTS) 633 634####################################################################### 635# generate build support files 636 637build_h := $(obj)/build.h 638 639# We have to manually export variables that `genbuild_h.sh` uses 640# when we call it through the `$(shell)` function. This is fragile 641# but as variables newly added to `genbuild_h.sh` would just not 642# work, we'd notice that instantly at least. 643build_h_exports := BUILD_TIMELESS KERNELVERSION COREBOOT_EXTRA_VERSION 644 645# Report new `build.ht` as dependency if `build.h` differs. 646build_h_check := \ 647 export $(foreach exp,$(build_h_exports),$(exp)="$($(exp))"); \ 648 util/genbuild_h/genbuild_h.sh $(xcompile) \ 649 >$(build_h)t 2>/dev/null; \ 650 cmp -s $(build_h)t $(build_h) >/dev/null 2>&1 || echo $(build_h)t 651 652$(build_h): $$(shell $$(build_h_check)) 653 @printf " GEN build.h\n" 654 mv $< $@ 655 656$(obj)/build_info: 657 @echo 'COREBOOT_VERSION: $(call strip_quotes,$(KERNELVERSION))' > $@.tmp 658 @echo 'MAINBOARD_VENDOR: $(call strip_quotes,$(CONFIG_MAINBOARD_VENDOR))' >> $@.tmp 659 @echo 'MAINBOARD_PART_NUMBER: $(call strip_quotes,$(CONFIG_MAINBOARD_PART_NUMBER))' >> $@.tmp 660 mv $@.tmp $@ 661 662####################################################################### 663# Build the tools 664CBFSTOOL:=$(objutil)/cbfstool/cbfstool 665FMAPTOOL:=$(objutil)/cbfstool/fmaptool 666RMODTOOL:=$(objutil)/cbfstool/rmodtool 667IFWITOOL:=$(objutil)/cbfstool/ifwitool 668IFITTOOL:=$(objutil)/cbfstool/ifittool 669AMDCOMPRESS:=$(objutil)/cbfstool/amdcompress 670CSE_FPT:=$(objutil)/cbfstool/cse_fpt 671CSE_SERGER:=$(objutil)/cbfstool/cse_serger 672 673$(obj)/cbfstool: $(CBFSTOOL) 674 cp $< $@ 675 676$(obj)/fmaptool: $(FMAPTOOL) 677 cp $< $@ 678 679$(obj)/rmodtool: $(RMODTOOL) 680 cp $< $@ 681 682$(obj)/ifwitool: $(IFWITOOL) 683 cp $< $@ 684 685$(obj)/ifittool: $(IFITTOOL) 686 cp $< $@ 687 688$(obj)/amdcompress: $(AMDCOMPRESS) 689 cp $< $@ 690 691$(obj)/cse_fpt: $(CSE_FPT) 692 cp $< $@ 693 694$(obj)/cse_serger: $(CSE_SERGER) 695 cp $< $@ 696 697_WINCHECK=$(shell uname -o 2> /dev/null) 698STACK= 699ifeq ($(_WINCHECK),Msys) 700 STACK=-Wl,--stack,16384000 701endif 702ifeq ($(_WINCHECK),Cygwin) 703 STACK=-Wl,--stack,16384000 704endif 705 706BINCFG:=$(objutil)/bincfg/bincfg 707 708IFDTOOL:=$(objutil)/ifdtool/ifdtool 709 710AMDFWTOOL:=$(objutil)/amdfwtool/amdfwtool 711AMDFWREAD:=$(objutil)/amdfwtool/amdfwread 712 713APCB_EDIT_TOOL:=$(top)/util/apcb/apcb_edit.py 714 715APCB_V3_EDIT_TOOL:=$(top)/util/apcb/apcb_v3_edit.py 716 717APCB_V3A_EDIT_TOOL:=$(top)/util/apcb/apcb_v3a_edit.py 718 719CBOOTIMAGE:=$(objutil)/cbootimage/cbootimage 720 721FUTILITY?=$(objutil)/futility/futility 722 723subdirs-y += util/nvidia 724 725$(obj)/config.h: $(objutil)/kconfig/conf 726 727####################################################################### 728# needed objects that every mainboard uses 729# Creation of these is architecture and mainboard independent 730DEVICETREE_FILE := $(src)/mainboard/$(MAINBOARDDIR)/$(CONFIG_DEVICETREE) 731 732SCONFIG_OPTIONS := --mainboard_devtree=$(DEVICETREE_FILE) 733 734ifneq ($(CONFIG_OVERRIDE_DEVICETREE),) 735OVERRIDE_DEVICETREE_FILE := $(src)/mainboard/$(MAINBOARDDIR)/$(CONFIG_OVERRIDE_DEVICETREE) 736SCONFIG_OPTIONS += --override_devtree=$(OVERRIDE_DEVICETREE_FILE) 737endif 738 739ifneq ($(CONFIG_CHIPSET_DEVICETREE),) 740CHIPSET_DEVICETREE_FILE := $(src)/$(CONFIG_CHIPSET_DEVICETREE) 741SCONFIG_OPTIONS += --chipset_devtree=$(CHIPSET_DEVICETREE_FILE) 742endif 743 744DEVICETREE_STATIC_C := $(obj)/mainboard/$(MAINBOARDDIR)/static.c 745SCONFIG_OPTIONS += --output_c=$(DEVICETREE_STATIC_C) 746 747DEVICETREE_STATIC_H := $(obj)/static.h 748SCONFIG_OPTIONS += --output_h=$(DEVICETREE_STATIC_H) 749 750DEVICETREE_DEVICENAMES_H := $(obj)/static_devices.h 751SCONFIG_OPTIONS += --output_d=$(DEVICETREE_DEVICENAMES_H) 752 753DEVICETREE_FWCONFIG_H := $(obj)/static_fw_config.h 754SCONFIG_OPTIONS += --output_f=$(DEVICETREE_FWCONFIG_H) 755 756$(DEVICETREE_STATIC_C): $(DEVICETREE_FILE) $(OVERRIDE_DEVICETREE_FILE) $(CHIPSET_DEVICETREE_FILE) $(objutil)/sconfig/sconfig 757 @printf " SCONFIG $(subst $(src)/,,$(<))\n" 758 mkdir -p $(dir $(DEVICETREE_STATIC_C)) 759 $(objutil)/sconfig/sconfig $(SCONFIG_OPTIONS) 760 761ramstage-y+=$(DEVICETREE_STATIC_C) 762romstage-y+=$(DEVICETREE_STATIC_C) 763verstage-y+=$(DEVICETREE_STATIC_C) 764bootblock-y+=$(DEVICETREE_STATIC_C) 765postcar-y+=$(DEVICETREE_STATIC_C) 766smm-y+=$(DEVICETREE_STATIC_C) 767 768# Ensure static.c and static.h are created before any objects are compiled 769ramstage-c-deps+=$(DEVICETREE_STATIC_C) 770romstage-c-deps+=$(DEVICETREE_STATIC_C) 771verstage-c-deps+=$(DEVICETREE_STATIC_C) 772bootblock-c-deps+=$(DEVICETREE_STATIC_C) 773postcar-c-deps+=$(DEVICETREE_STATIC_C) 774smm-c-deps+=$(DEVICETREE_STATIC_C) 775 776# Ensure fmap_config.h are created before any objects are compiled 777ramstage-c-deps+=$(obj)/fmap_config.h 778romstage-c-deps+=$(obj)/fmap_config.h 779verstage-c-deps+=$(obj)/fmap_config.h 780bootblock-c-deps+=$(obj)/fmap_config.h 781postcar-c-deps+=$(obj)/fmap_config.h 782smm-c-deps+=$(obj)/fmap_config.h 783 784.PHONY: devicetree 785devicetree: $(DEVICETREE_STATIC_C) 786 787ramstage-y += $(CONFIG_MEMLAYOUT_LD_FILE) 788romstage-y += $(CONFIG_MEMLAYOUT_LD_FILE) 789bootblock-y += $(CONFIG_MEMLAYOUT_LD_FILE) 790verstage-y += $(CONFIG_MEMLAYOUT_LD_FILE) 791postcar-y += $(CONFIG_MEMLAYOUT_LD_FILE) 792decompressor-y += $(CONFIG_MEMLAYOUT_LD_FILE) 793 794####################################################################### 795# Clean up rules 796clean-abuild: 797 rm -rf coreboot-builds 798 799####################################################################### 800# Development utilities 801printcrt0s: 802 @echo crt0s=$(crt0s) 803 @echo ldscripts=$(ldscripts) 804 805update: 806 dongle.py -c /dev/term/1 $(obj)/coreboot.rom EOF 807 808check-style: 809 grep "^# DESCR:" util/lint/check-style | sed "s,.*DESCR: *,," 810 echo "========" 811 util/lint/check-style 812 echo "========" 813 814gitconfig: 815 util/gitconfig/gitconfig.sh "$(MAKE)" 816 817install-git-commit-clangfmt: 818 cp util/scripts/prepare-commit-msg.clang-format .git/hooks/prepare-commit-msg 819 820include util/crossgcc/Makefile.mk 821 822.PHONY: tools 823tools: $(objutil)/kconfig/conf $(objutil)/kconfig/toada $(CBFSTOOL) $(objutil)/cbfstool/cbfs-compression-tool $(FMAPTOOL) $(RMODTOOL) $(IFWITOOL) $(objutil)/nvramtool/nvramtool $(objutil)/sconfig/sconfig $(IFDTOOL) $(CBOOTIMAGE) $(AMDFWTOOL) $(AMDCOMPRESS) $(FUTILITY) $(BINCFG) $(IFITTOOL) $(objutil)/supermicro/smcbiosinfo $(CSE_FPT) $(CSE_SERGER) $(AMDFWREAD) 824 825########################################################################### 826# Common recipes for all stages 827########################################################################### 828 829# loadaddr can determine the load address of a stage, which may be needed for 830# platform-specific image headers (only works *after* the stage has been built) 831loadaddr = $(shell $(OBJDUMP_$(1)) -p $(objcbfs)/$(1).debug | \ 832 sed -ne '/LOAD/s/^.*vaddr 0x\([0-9a-fA-F]\{8\}\).*$$/0x\1/p') 833 834# find-substr is required for stages like romstage_null and romstage_xip to 835# eliminate the _* part of the string 836find-substr = $(word 1,$(subst _, ,$(1))) 837 838# find-class is used to identify the class from the name of the stage 839# The input to this macro can be something like romstage.x or romstage.x.y 840# find-class recursively strips off the suffixes to extract the exact class name 841# e.g.: if romstage.x is provided to find-class, it will remove .x and return romstage 842# if romstage.x.y is provided, it will first remove .y, call find-class with romstage.x 843# and remove .x the next time and finally return romstage 844find-class = $(if $(filter $(1),$(basename $(1))),$(if $(CC_$(1)), $(1), $(call find-substr,$(1))),$(call find-class,$(basename $(1)))) 845 846# Bootblocks are not CBFS stages. coreboot is currently expecting the bss to 847# be cleared by the loader of the stage. For ARM SoCs that means one needs to 848# include the bss section in the binary so the BootROM clears the bss on 849# loading of the bootblock stage. Achieve this by marking the bss section 850# loadable,allocatable, and data. Do the same for the .data section in case 851# the linker marked it NOBITS automatically because there are only zeroes in it. 852preserve-bss-flags := --set-section-flags .bss=load,alloc,data --set-section-flags .data=load,alloc,data 853 854# For Intel TXT files in the CBFS needs to be marked as 'Initial Boot Block'. 855# As CBFS attributes aren't cheap, only mark them if TXT is enabled. 856ifeq ($(CONFIG_INTEL_TXT),y) 857 858TXTIBB := --ibb 859 860else 861 862TXTIBB := 863 864endif 865 866ifeq ($(CONFIG_COMPRESS_BOOTBLOCK),y) 867 868$(objcbfs)/bootblock.lz4: $(objcbfs)/bootblock.elf $(objutil)/cbfstool/cbfs-compression-tool 869 @printf " LZ4 $(subst $(obj)/,,$(@))\n" 870 $(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@.tmp 871 $(OBJCOPY_bootblock) -O binary $@.tmp 872 $(objutil)/cbfstool/cbfs-compression-tool rawcompress $@.tmp $@.tmp2 lz4 873 rm -f $@.tmp 874 mv $@.tmp2 $@ 875 876# Put assembled decompressor+bootblock into bootblock.raw.elf so that SoC 877# Makefiles wrapping the bootblock in a header can always key off the same file. 878$(objcbfs)/bootblock.raw.elf: $(objcbfs)/decompressor.elf 879 @printf " OBJCOPY $(notdir $(@))\n" 880 $(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@ 881 882else # CONFIG_COMPRESS_BOOTBLOCK 883 884$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf 885 @printf " OBJCOPY $(notdir $(@))\n" 886 $(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@ 887 888endif # CONFIG_COMPRESS_BOOTBLOCK 889 890$(objcbfs)/bootblock.raw.bin: $(objcbfs)/bootblock.raw.elf 891 @printf " OBJCOPY $(notdir $(@))\n" 892 $(OBJCOPY_bootblock) -O binary $< $@ 893 894ifneq ($(CONFIG_HAVE_BOOTBLOCK),y) 895$(objcbfs)/bootblock.bin: 896 dd if=/dev/zero of=$@ bs=64 count=1 897endif 898 899$(objcbfs)/%.bin: $(objcbfs)/%.raw.bin 900 cp $< $@ 901 902$(objcbfs)/%.map: $(objcbfs)/%.debug 903 $(eval class := $(call find-class,$(@F))) 904 $(NM_$(class)) -n $< | sort > $(basename $@).map 905 906$(objcbfs)/%.elf: $(objcbfs)/%.debug $(objcbfs)/%.map 907 $(eval class := $(call find-class,$(@F))) 908 @printf " OBJCOPY $(subst $(obj)/,,$(@))\n" 909 cp $< $@.tmp 910 $(OBJCOPY_$(class)) --strip-debug $@.tmp 911 $(OBJCOPY_$(class)) --add-gnu-debuglink=$< $@.tmp 912 mv $@.tmp $@ 913 914 915########################################################################### 916# Build the final rom image 917########################################################################### 918 919# extract_nth - Return a subsection of the $file string 920# 921# the input string looks like this: 922# ./build/cbfs/fallback/romstage.elf|fallback/romstage|stage|none||64|--xip*-S*.car.data*-P*0x10000 923# 924# Sections: 925# 1 - Path and name of file [FILENAME: Added to cbfs-files-y list variable] 926# 2 - Name of file in cbfs [$(FILENAME)-file] 927# 3 - File type: [$(FILENAME)-type] 928# bootblock, cbfs header, stage, payload, optionrom, bootsplash, raw, vsa, 929# mbi, microcode, fsp, mrc, cmos_default, cmos_layout, spd, mrc_cache, 930# mma, efi, deleted, null 931# 4 - Compression type [$(FILENAME)-compression] 932# none, LZMA 933# 5 - Base address [$(FILENAME)-position] 934# 6 - Alignment [$(FILENAME)-align] 935# 7 - cbfstool flags [$(FILENAME)-options] 936# 937# Input: 938# $(1) = Section to extract 939# $(2) = Input string 940# 941# Steps: 942# 1) replace all '|' characters with the sequence '- -' within the full string, prepended and appended with the character '-' 943# 2) extract the specified section from the string - this gets us the section surrounded by '-' characters 944# 3) remove the leading and trailing '-' characters 945# 4) replace all '*' characters with spaces 946extract_nth=$(subst *,$(spc),$(patsubst -%-,%,$(word $(1), $(subst |,- -,-$(2)-)))) 947 948# regions-for-file - Returns a cbfstool regions parameter 949# $(call regions-for-file,$(filename)) 950# returns "REGION1,REGION2,..." 951# 952# This is the default implementation. When using a boot strategy employing 953# multiple CBFSes in fmap regions, override it. 954regions-for-file ?= $(if $(value regions-for-file-$(1)), $(regions-for-file-$(1)), COREBOOT) 955 956ifeq ($(CONFIG_CBFS_AUTOGEN_ATTRIBUTES),y) 957 cbfs-autogen-attributes=-g 958endif 959 960# cbfs-add-cmd-for-region 961# $(call cbfs-add-cmd-for-region,file in extract_nth format,region name) 962# 963# CBFSTOOL_ADD_CMD_OPTIONS can be used by arch/SoC/mainboard to supply 964# add commands with any additional arguments for cbfstool. 965# Example: --ext-win-base <base> --ext-win-size <size> 966define cbfs-add-cmd-for-region 967 $(CBFSTOOL) $@.tmp \ 968 add$(if $(filter stage,$(call extract_nth,3,$(1))),-stage)$(if \ 969 $(filter payload,$(call extract_nth,3,$(1))),-payload)$(if \ 970 $(filter flat-binary,$(call extract_nth,3,$(1))),-flat-binary) \ 971 -f $(call extract_nth,1,$(1)) \ 972 -n $(call extract_nth,2,$(1)) \ 973 $(if $(filter-out flat-binary payload stage,$(call \ 974 extract_nth,3,$(1))),-t $(call extract_nth,3,$(1))) \ 975 $(if $(call extract_nth,4,$(1)),-c $(call extract_nth,4,$(1))) \ 976 $(cbfs-autogen-attributes) \ 977 -r $(2) \ 978 $(if $(call extract_nth,6,$(1)),-a $(call extract_nth,6,$(file)), \ 979 $(if $(call extract_nth,5,$(file)),-b $(call extract_nth,5,$(file)))) \ 980 $(call extract_nth,7,$(1)) \ 981 $(CBFSTOOL_ADD_CMD_OPTIONS) 982 983endef 984# Empty line before endef is necessary so cbfs-add-cmd-for-region ends in a 985# newline 986 987# cbfs-add-cmd 988# $(call cbfs-add-cmd, 989# file in extract_nth format, 990# region name, 991# non-empty if file removal requested) 992define cbfs-add-cmd 993 printf " CBFS $(call extract_nth,2,$(1))\n" 994 $(if $(3),-$(CBFSTOOL) $@.tmp remove -n $(call extract_nth,2,$(file)) 2>/dev/null) 995 $(call cbfs-add-cmd-for-region,$(1),$(2)) 996endef 997 998# list of files to add (using their file system names, not CBFS names), 999# for dependencies etc. 1000prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file))) 1001 1002# $(all-regions) 1003# returns full list of fmap regions that we add files to 1004all-regions = $(sort $(subst $(comma),$(spc), \ 1005 $(foreach file,$(cbfs-files), \ 1006 $(call regions-for-file,$(call extract_nth,2,$(file)))))) 1007 1008# $(call all-files-in-region,region name) 1009# returns elements in $(cbfs-files) that end up in that region, in the order 1010# they appear in $(cbfs-files) 1011all-files-in-region = $(foreach file,$(cbfs-files), \ 1012 $(if $(filter $(1), \ 1013 $(subst $(comma),$(spc),$(call regions-for-file,$(call extract_nth,2,$(file))))), \ 1014 $(file))) 1015 1016# $(call update-file-for-region,file string from $(cbfs-files),region name) 1017# Update position and alignment according to overrides for region 1018# Doesn't check for invalid configurations (eg. resetting neither or both 1019# position and align) 1020# Returns the updated file string 1021update-file-for-region = \ 1022 $(subst $(spc),*,$(call extract_nth,1,$(1))|$(call extract_nth,2,$(1))|$(call extract_nth,3,$(1))|$(call extract_nth,4,$(1))|$($(call extract_nth,2,$(1))-$(2)-position)|$($(call extract_nth,2,$(1))-$(2)-align)|$(call extract_nth,7,$(1))) 1023 1024# $(call placed-files-in-region,region name) 1025# like all-files-in-region, but updates the files to contain region overrides 1026# to position or alignment. 1027placed-files-in-region = $(foreach file,$(call all-files-in-region,$(1)), \ 1028 $(if $($(call extract_nth,2,$(file))-$(1)-position), \ 1029 $(if $($(call extract_nth,2,$(file))-$(1)-align), \ 1030 $(error It is not allowed to specify both alignment and position for $(call extract_nth,2,$(file))-$(1))) \ 1031 $(call update-file-for-region,$(file),$(1)), \ 1032 $(if $($(call extract_nth,2,$(file))-$(1)-align), \ 1033 $(call update-file-for-region,$(file),$(1)), \ 1034 $(file)))) 1035 1036# $(call sort-files,subset of $(cbfs-files)) 1037# reorders the files in the given set to list files at fixed positions first, 1038# followed by aligned files and finally those with no constraints. 1039sort-files = \ 1040 $(eval _tmp_fixed:=) \ 1041 $(eval _tmp_aligned:=) \ 1042 $(eval _tmp_regular:=) \ 1043 $(foreach file,$(1), \ 1044 $(if $(call extract_nth,5,$(file)),\ 1045 $(eval _tmp_fixed += $(file)), \ 1046 $(if $(call extract_nth,6,$(file)), \ 1047 $(eval _tmp_aligned += $(file)), \ 1048 $(eval _tmp_regular += $(file))))) \ 1049 $(_tmp_fixed) $(_tmp_aligned) $(_tmp_regular) 1050 1051# command list to add files to CBFS 1052prebuild-files = $(foreach region,$(all-regions), \ 1053 $(foreach file, \ 1054 $(call sort-files,$(call placed-files-in-region,$(region))), \ 1055 $(call cbfs-add-cmd,$(file),$(region),$(CONFIG_UPDATE_IMAGE)))) 1056 1057# If no FMD file (Flashmap) is supplied by mainboard, fall back to a default 1058ifeq ($(CONFIG_FMDFILE),) 1059 1060ifeq ($(CONFIG_ARCH_X86),y) 1061 1062DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default-x86.fmd 1063# check if IFD_CHIPSET is set and if yes generate a FMAP template from IFD descriptor 1064ifneq ($(CONFIG_IFD_CHIPSET),) 1065ifeq ($(CONFIG_HAVE_IFD_BIN),y) 1066DEFAULT_FLASHMAP:=$(obj)/fmap-template.fmd 1067$(DEFAULT_FLASHMAP): $(call strip_quotes,$(CONFIG_IFD_BIN_PATH)) $(IFDTOOL) 1068 echo " IFDTOOL -p $(CONFIG_IFD_CHIPSET) -F $@ $<" 1069 $(IFDTOOL) -p $(CONFIG_IFD_CHIPSET) -F $@ $< 1070endif # ifeq($(CONFIG_HAVE_IFD_BIN),y) 1071endif # ifneq($(CONFIG_IFD_CHIPSET),) 1072 1073# entire flash 1074FMAP_ROM_ADDR := $(call int-subtract, 0x100000000 $(CONFIG_ROM_SIZE)) 1075FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE) 1076# entire "BIOS" region (everything directly of concern to the host system) 1077# relative to ROM_BASE 1078FMAP_BIOS_BASE := $(call int-align, $(call int-subtract, $(CONFIG_ROM_SIZE) $(CONFIG_CBFS_SIZE)), 0x10000) 1079FMAP_BIOS_SIZE := $(call int-align-down, $(shell echo $(CONFIG_CBFS_SIZE) | tr A-F a-f), 0x10000) 1080# position and size of flashmap, relative to BIOS_BASE 1081 1082# 1083# X86 CONSOLE FMAP region 1084# 1085# position, size and entry line of CONSOLE relative to BIOS_BASE, if enabled 1086 1087FMAP_CURRENT_BASE := 0 1088 1089ifeq ($(CONFIG_CONSOLE_SPI_FLASH),y) 1090FMAP_CONSOLE_BASE := $(FMAP_CURRENT_BASE) 1091FMAP_CONSOLE_SIZE := $(CONFIG_CONSOLE_SPI_FLASH_BUFFER_SIZE) 1092FMAP_CONSOLE_ENTRY := CONSOLE@$(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE) 1093FMAP_CURRENT_BASE := $(call int-add, $(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE)) 1094else 1095FMAP_CONSOLE_ENTRY := 1096endif 1097 1098ifeq ($(CONFIG_CACHE_MRC_SETTINGS),y) 1099FMAP_MRC_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000) 1100FMAP_MRC_CACHE_SIZE := $(CONFIG_MRC_SETTINGS_CACHE_SIZE) 1101FMAP_MRC_CACHE_ENTRY := RW_MRC_CACHE@$(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE) 1102FMAP_CURRENT_BASE := $(call int-add, $(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE)) 1103else 1104FMAP_MRC_CACHE_ENTRY := 1105endif 1106 1107ifeq ($(CONFIG_SMMSTORE),y) 1108FMAP_SMMSTORE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000) 1109FMAP_SMMSTORE_SIZE := $(CONFIG_SMMSTORE_SIZE) 1110FMAP_SMMSTORE_ENTRY := SMMSTORE@$(FMAP_SMMSTORE_BASE) $(FMAP_SMMSTORE_SIZE) 1111FMAP_CURRENT_BASE := $(call int-add, $(FMAP_SMMSTORE_BASE) $(FMAP_SMMSTORE_SIZE)) 1112else 1113FMAP_SMMSTORE_ENTRY := 1114endif 1115 1116ifeq ($(CONFIG_SPD_CACHE_IN_FMAP),y) 1117FMAP_SPD_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x4000) 1118FMAP_SPD_CACHE_SIZE := $(call int-multiply, $(CONFIG_DIMM_MAX) $(CONFIG_DIMM_SPD_SIZE)) 1119FMAP_SPD_CACHE_SIZE := $(call int-align, $(FMAP_SPD_CACHE_SIZE), 0x1000) 1120FMAP_SPD_CACHE_ENTRY := $(CONFIG_SPD_CACHE_FMAP_NAME)@$(FMAP_SPD_CACHE_BASE) $(FMAP_SPD_CACHE_SIZE) 1121FMAP_CURRENT_BASE := $(call int-add, $(FMAP_SPD_CACHE_BASE) $(FMAP_SPD_CACHE_SIZE)) 1122else 1123FMAP_SPD_CACHE_ENTRY := 1124endif 1125 1126ifeq ($(CONFIG_VPD),y) 1127FMAP_VPD_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x4000) 1128FMAP_VPD_SIZE := $(CONFIG_VPD_FMAP_SIZE) 1129FMAP_VPD_ENTRY := $(CONFIG_VPD_FMAP_NAME)@$(FMAP_VPD_BASE) $(FMAP_VPD_SIZE) 1130FMAP_CURRENT_BASE := $(call int-add, $(FMAP_VPD_BASE) $(FMAP_VPD_SIZE)) 1131else 1132FMAP_VPD_ENTRY := 1133endif 1134 1135ifeq ($(CONFIG_INCLUDE_HSPHY_IN_FMAP),y) 1136FMAP_HSPHY_FW_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x1000) 1137FMAP_HSPHY_FW_SIZE := $(CONFIG_HSPHY_FW_MAX_SIZE) 1138FMAP_HSPHY_FW_ENTRY := HSPHY_FW@$(FMAP_HSPHY_FW_BASE) $(FMAP_HSPHY_FW_SIZE) 1139FMAP_CURRENT_BASE := $(call int-add, $(FMAP_HSPHY_FW_BASE) $(FMAP_HSPHY_FW_SIZE)) 1140else 1141FMAP_HSPHY_FW_ENTRY := 1142endif 1143 1144# 1145# X86 FMAP region 1146# 1147# 1148# position, size 1149FMAP_FMAP_BASE := $(FMAP_CURRENT_BASE) 1150FMAP_FMAP_SIZE := 0x200 1151 1152# 1153# X86 COREBOOT default cbfs FMAP region 1154# 1155# position and size of CBFS, relative to BIOS_BASE 1156FMAP_CBFS_BASE := $(call int-add, $(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE)) 1157FMAP_CBFS_SIZE := $(call int-subtract, $(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE)) 1158 1159else # ifeq ($(CONFIG_ARCH_X86),y) 1160 1161DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default.fmd 1162# entire flash 1163FMAP_ROM_ADDR := 0 1164FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE) 1165# entire "BIOS" region (everything directly of concern to the host system) 1166# relative to ROM_BASE 1167FMAP_BIOS_BASE := 0 1168FMAP_BIOS_SIZE := $(CONFIG_CBFS_SIZE) 1169# position and size of flashmap, relative to BIOS_BASE 1170FMAP_FMAP_BASE := 0x20000 1171FMAP_FMAP_SIZE := 0x200 1172 1173FMAP_CURRENT_BASE := $(call int-add, $(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE)) 1174 1175# 1176# NON-X86 CONSOLE FMAP region 1177# 1178# position, size and entry line of CONSOLE relative to BIOS_BASE, if enabled 1179ifeq ($(CONFIG_CONSOLE_SPI_FLASH),y) 1180FMAP_CONSOLE_BASE := $(FMAP_CURRENT_BASE) 1181FMAP_CONSOLE_SIZE := $(CONFIG_CONSOLE_SPI_FLASH_BUFFER_SIZE) 1182FMAP_CONSOLE_ENTRY := CONSOLE@$(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE) 1183FMAP_CURRENT_BASE := $(call int-add, $(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE)) 1184else 1185FMAP_CONSOLE_ENTRY := 1186endif 1187 1188# 1189# NON-X86 RW_MRC_CACHE FMAP region 1190# 1191# position, size and entry line of MRC_CACHE relative to BIOS_BASE, if enabled 1192ifeq ($(CONFIG_CACHE_MRC_SETTINGS),y) 1193FMAP_MRC_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000) 1194FMAP_MRC_CACHE_SIZE := $(CONFIG_MRC_SETTINGS_CACHE_SIZE) 1195FMAP_MRC_CACHE_ENTRY := RW_MRC_CACHE@$(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE) 1196FMAP_CURRENT_BASE := $(call int-add, $(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE)) 1197else 1198FMAP_MRC_CACHE_ENTRY := 1199endif 1200 1201# 1202# NON-X86 COREBOOT default cbfs FMAP region 1203# 1204# position and size of CBFS, relative to BIOS_BASE 1205FMAP_CBFS_BASE := $(FMAP_CURRENT_BASE) 1206FMAP_CBFS_SIZE := $(call int-subtract,$(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE)) 1207 1208endif # ifeq ($(CONFIG_ARCH_X86),y) 1209 1210$(obj)/fmap.fmd: $(top)/Makefile.mk $(DEFAULT_FLASHMAP) $(obj)/config.h 1211 sed -e "s,##ROM_BASE##,$(FMAP_ROM_ADDR)," \ 1212 -e "s,##ROM_SIZE##,$(FMAP_ROM_SIZE)," \ 1213 -e "s,##BIOS_BASE##,$(FMAP_BIOS_BASE)," \ 1214 -e "s,##BIOS_SIZE##,$(FMAP_BIOS_SIZE)," \ 1215 -e "s,##FMAP_BASE##,$(FMAP_FMAP_BASE)," \ 1216 -e "s,##FMAP_SIZE##,$(FMAP_FMAP_SIZE)," \ 1217 -e "s,##CONSOLE_ENTRY##,$(FMAP_CONSOLE_ENTRY)," \ 1218 -e "s,##MRC_CACHE_ENTRY##,$(FMAP_MRC_CACHE_ENTRY)," \ 1219 -e "s,##SMMSTORE_ENTRY##,$(FMAP_SMMSTORE_ENTRY)," \ 1220 -e "s,##SPD_CACHE_ENTRY##,$(FMAP_SPD_CACHE_ENTRY)," \ 1221 -e "s,##VPD_ENTRY##,$(FMAP_VPD_ENTRY)," \ 1222 -e "s,##HSPHY_FW_ENTRY##,$(FMAP_HSPHY_FW_ENTRY)," \ 1223 -e "s,##CBFS_BASE##,$(FMAP_CBFS_BASE)," \ 1224 -e "s,##CBFS_SIZE##,$(FMAP_CBFS_SIZE)," \ 1225 $(DEFAULT_FLASHMAP) > $@.tmp 1226 mv $@.tmp $@ 1227else # ifeq ($(CONFIG_FMDFILE),) 1228$(obj)/fmap.fmd: $(CONFIG_FMDFILE) $(obj)/config.h 1229 $(HOSTCC) $(PREPROCESS_ONLY) -include $(obj)/config.h $< -o $@.pre 1230 mv $@.pre $@ 1231endif # ifeq ($(CONFIG_FMDFILE),) 1232 1233# generated at the same time as fmap.fmap 1234$(obj)/fmap_config.h: $(obj)/fmap.fmap 1235 true 1236$(obj)/fmap.desc: $(obj)/fmap.fmap 1237 true 1238 1239$(obj)/fmap.fmap: $(obj)/fmap.fmd $(FMAPTOOL) 1240 echo " FMAP $(FMAPTOOL) -h $(obj)/fmap_config.h $< $@" 1241 $(FMAPTOOL) -h $(obj)/fmap_config.h -R $(obj)/fmap.desc $< $@ 1242 1243ifeq ($(CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK),y) 1244TS_OPTIONS := -j $(CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE) 1245endif 1246 1247ifneq ($(CONFIG_ARCH_X86),y) 1248add_bootblock = $(CBFSTOOL) $(1) write -u -r BOOTBLOCK -f $(2) 1249endif 1250 1251# coreboot.pre doesn't follow the standard Make conventions. It gets modified 1252# by multiple rules, and thus we can't compute the dependencies correctly. 1253$(shell rm -f $(obj)/coreboot.pre) 1254 1255ifneq ($(CONFIG_UPDATE_IMAGE),y) 1256$(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL) $(obj)/fmap.fmap $(obj)/fmap.desc $(objcbfs)/bootblock.bin 1257 $(CBFSTOOL) $@.tmp create -M $(obj)/fmap.fmap -r $(shell cat $(obj)/fmap.desc) 1258 printf " BOOTBLOCK\n" 1259 $(call add_bootblock,$@.tmp,$(objcbfs)/bootblock.bin) 1260 $(prebuild-files) true 1261 mv $@.tmp $@ 1262else # ifneq ($(CONFIG_UPDATE_IMAGE),y) 1263.PHONY: $(obj)/coreboot.pre 1264$(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL) 1265 mv $(obj)/coreboot.rom $@.tmp || \ 1266 (echo "Error: You have UPDATE_IMAGE set in Kconfig, but have no existing image to update." && \ 1267 echo "Exiting." && \ 1268 false) 1269 $(prebuild-files) true 1270 mv $@.tmp $@ 1271endif # ifneq ($(CONFIG_UPDATE_IMAGE),y) 1272 1273ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y) 1274REFCODE_BLOB=$(obj)/refcode.rmod 1275$(REFCODE_BLOB): $(RMODTOOL) 1276 $(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@ 1277endif 1278 1279ifeq ($(CONFIG_HAVE_RAMSTAGE),y) 1280RAMSTAGE=$(objcbfs)/ramstage.elf 1281else 1282RAMSTAGE= 1283endif 1284 1285add_intermediate = \ 1286 $(1): $(obj)/coreboot.pre $(2) | $(INTERMEDIATE) \ 1287 $(eval INTERMEDIATE+=$(1)) $(eval PHONY+=$(1)) 1288 1289$(obj)/coreboot.rom: $(obj)/coreboot.pre $(CBFSTOOL) $(IFITTOOL) $$(INTERMEDIATE) 1290 @printf " CBFS $(subst $(obj)/,,$(@))\n" 1291# The full ROM may be larger than the CBFS part, so create an empty 1292# file (filled with \377 = 0xff) and copy the CBFS image over it. 1293 dd if=/dev/zero bs=$(call _toint,$(CONFIG_ROM_SIZE)) count=1 2> /dev/null | tr '\000' '\377' > $@.tmp 1294 dd if=$(obj)/coreboot.pre of=$@.tmp bs=8192 conv=notrunc 2> /dev/null 1295ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y) 1296# Print final FIT table 1297 $(IFITTOOL) -f $@.tmp -D -r COREBOOT 1298# Print final TS BOOTBLOCK FIT table 1299ifeq ($(CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK),y) 1300 @printf " TOP SWAP FIT table\n" 1301 $(IFITTOOL) -f $@.tmp -D $(TS_OPTIONS) -r COREBOOT 1302endif # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK 1303endif # CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE 1304 mv $@.tmp $@ 1305 @printf " CBFSLAYOUT $(subst $(obj)/,,$(@))\n\n" 1306 $(CBFSTOOL) $@ layout 1307 @printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n" 1308ifeq ($(CONFIG_CBFS_VERIFICATION),y) 1309 line=$$($(CBFSTOOL) $@ print -kv 2>/dev/null | grep -F '[CBFS VERIFICATION (COREBOOT)]') ;\ 1310 if ! printf "$$line" | grep -q 'fully valid'; then \ 1311 echo "CBFS verification error: $$line" ;\ 1312 exit 1 ;\ 1313 fi 1314endif # CONFIG_CBFS_VERIFICATION 1315 1316ifeq ($(CONFIG_SEPARATE_ROMSTAGE),y) 1317cbfs-files-y += $(CONFIG_CBFS_PREFIX)/romstage 1318$(CONFIG_CBFS_PREFIX)/romstage-file := $(objcbfs)/romstage.elf 1319$(CONFIG_CBFS_PREFIX)/romstage-type := stage 1320$(CONFIG_CBFS_PREFIX)/romstage-compression := $(CBFS_PRERAM_COMPRESS_FLAG) 1321ifeq ($(CONFIG_ARCH_ROMSTAGE_ARM),y) 1322$(CONFIG_CBFS_PREFIX)/romstage-options := -b 0 1323endif 1324ifeq ($(CONFIG_ARCH_ROMSTAGE_X86_32)$(CONFIG_ARCH_ROMSTAGE_X86_64),y) 1325ifeq ($(CONFIG_NO_XIP_EARLY_STAGES),y) 1326$(CONFIG_CBFS_PREFIX)/romstage-options := -S ".car.data" 1327else 1328$(CONFIG_CBFS_PREFIX)/romstage-options := -S ".car.data,.data" 1329endif 1330 1331# If CAR does not support execution of code, romstage on x86 is expected to be 1332# xip. 1333ifneq ($(CONFIG_NO_XIP_EARLY_STAGES),y) 1334$(CONFIG_CBFS_PREFIX)/romstage-options += --xip 1335 1336# For efficient MTRR utilisation use natural alignment for romstage. 1337ifeq ($(CONFIG_SETUP_XIP_CACHE),y) 1338$(CONFIG_CBFS_PREFIX)/romstage-options += --pow2page 1339endif # CONFIG_SETUP_XIP_CACHE 1340 1341endif # CONFIG_NO_XIP_EARLY_STAGES 1342endif # CONFIG_ARCH_ROMSTAGE_X86_32 / CONFIG_ARCH_ROMSTAGE_X86_64 1343ifeq ($(CONFIG_VBOOT_STARTS_IN_ROMSTAGE),y) 1344$(CONFIG_CBFS_PREFIX)/romstage-options += $(TXTIBB) 1345endif 1346else # CONFIG_SEPARATE_ROMSTAGE 1347postinclude-hooks += $$(eval bootblock-srcs += $$(romstage-srcs)) 1348postinclude-hooks += $$(eval bootblock-libs += $$(romstage-libs)) 1349endif 1350 1351cbfs-files-$(CONFIG_HAVE_RAMSTAGE) += $(CONFIG_CBFS_PREFIX)/ramstage 1352$(CONFIG_CBFS_PREFIX)/ramstage-file := $(RAMSTAGE) 1353$(CONFIG_CBFS_PREFIX)/ramstage-type := stage 1354$(CONFIG_CBFS_PREFIX)/ramstage-compression := $(CBFS_COMPRESS_FLAG) 1355# The AMD LPC SPI DMA controller requires source files to be 64 byte aligned. 1356ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_LPC_SPI_DMA),y) 1357$(CONFIG_CBFS_PREFIX)/ramstage-align := 64 1358endif 1359 1360cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode 1361$(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB) 1362$(CONFIG_CBFS_PREFIX)/refcode-type := stage 1363$(CONFIG_CBFS_PREFIX)/refcode-compression := $(CBFS_COMPRESS_FLAG) 1364 1365cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin 1366vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE) 1367vgaroms/seavgabios.bin-type := raw 1368 1369cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config 1370config-file := $(DOTCONFIG):config 1371config-type := raw 1372config-compression := LZMA 1373 1374cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision 1375revision-file := $(obj)/build.h 1376revision-type := raw 1377 1378cbfs-files-y += build_info 1379build_info-file := $(obj)/build_info 1380build_info-type := raw 1381 1382ifeq ($(CONFIG_BOOTSPLASH_CONVERT),y) 1383ifeq ($(shell command -v convert),) 1384$(error CONFIG_BOOTSPLASH_CONVERT requires the convert program (part of ImageMagick)) 1385endif 1386cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash.jpg 1387bootsplash.jpg-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)):jpg420 1388bootsplash.jpg-type := bootsplash 1389else 1390BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))) 1391cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX) 1392bootsplash$(BOOTSPLASH_SUFFIX)-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)) 1393bootsplash$(BOOTSPLASH_SUFFIX)-type := bootsplash 1394endif 1395 1396# Ensure that no payload segment overlaps with memory regions used by ramstage 1397# (not for x86 since it can relocate itself in that case) 1398ifneq ($(CONFIG_ARCH_X86),y) 1399check-ramstage-overlap-regions := ramstage 1400check-ramstage-overlap-files := 1401ifneq ($(CONFIG_PAYLOAD_NONE),y) 1402check-ramstage-overlap-files += $(CONFIG_CBFS_PREFIX)/payload 1403endif 1404 1405# will output one or more lines of "<load address in hex> <memlen in decimal>" 1406cbfs-get-segments-cmd = $(CBFSTOOL) $(obj)/coreboot.pre print -v | sed -n \ 1407 '\%$(1)%,\%^[^ ]\{4\}%s% .*load: \(0x[0-9a-fA-F]*\),.*length: [0-9]*/\([0-9]*\).*%\1 \2%p' 1408 1409ramstage-symbol-addr-cmd = $(OBJDUMP_ramstage) -t $(objcbfs)/ramstage.elf | \ 1410 sed -n '/ $(1)$$/s/^\([0-9a-fA-F]*\) .*/0x\1/p' | \ 1411 uniq 1412 1413$(call add_intermediate, check-ramstage-overlaps) 1414 programs=$$($(foreach file,$(check-ramstage-overlap-files), \ 1415 $(call cbfs-get-segments-cmd,$(file)) ; )) ; \ 1416 regions=$$($(foreach region,$(check-ramstage-overlap-regions), \ 1417 echo $(region) ; \ 1418 $(call ramstage-symbol-addr-cmd,_$(region)) ; \ 1419 $(call ramstage-symbol-addr-cmd,_e$(region)) ; )) ; \ 1420 pstart= ; pend= ; \ 1421 for x in $$programs; do \ 1422 if [ -z $$pstart ]; then pstart=$$(($$x)) ; continue ; fi ; \ 1423 pend=$$(($$pstart + $$x)) ; \ 1424 rname= ; rstart= ; rend= ; \ 1425 for y in $$regions ; do \ 1426 if [ -z $$rname ]; then rname=$$y ; continue ; fi ; \ 1427 if [ -z $$rstart ]; then rstart=$$(($$y)) ; continue ; fi ; \ 1428 rend=$$(($$y)) ; \ 1429 if [ $$pstart -lt $$rend -a $$rstart -lt $$pend ]; then \ 1430 echo "ERROR: Ramstage region _$$rname@($$rstart,$$rend) overlapped by($$pstart,$$pend):" \ 1431 $(check-ramstage-overlap-files) ; \ 1432 exit 1 ; \ 1433 fi ; \ 1434 rname= ; rstart= ; rend= ; \ 1435 done ; \ 1436 pstart= ; pend= ; \ 1437 done 1438 1439endif 1440
