xref: /nrf52832-nimble/nordic/nrfx/mdk/nrf52_to_nrf52840.h (revision 150812a83cab50279bd772ef6db1bfaf255f2c5b)
1 /*
2 
3 Copyright (c) 2010 - 2018, Nordic Semiconductor ASA All rights reserved.
4 
5 Redistribution and use in source and binary forms, with or without
6 modification, are permitted provided that the following conditions are met:
7 
8 1. Redistributions of source code must retain the above copyright notice, this
9    list of conditions and the following disclaimer.
10 
11 2. Redistributions in binary form must reproduce the above copyright
12    notice, this list of conditions and the following disclaimer in the
13    documentation and/or other materials provided with the distribution.
14 
15 3. Neither the name of Nordic Semiconductor ASA nor the names of its
16    contributors may be used to endorse or promote products derived from this
17    software without specific prior written permission.
18 
19 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 IMPLIED WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE
22 ARE DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
23 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 POSSIBILITY OF SUCH DAMAGE.
30 
31 */
32 
33 #ifndef NRF52_TO_NRF52840_H
34 #define NRF52_TO_NRF52840_H
35 
36 /*lint ++flb "Enter library region */
37 
38 /* This file is given to prevent your SW from not compiling with the name changes between nRF51 or nRF52832 and nRF52840 devices.
39  * It redefines the old nRF51 or nRF52832 names into the new ones as long as the functionality is still supported. If the
40  * functionality is gone, there old names are not defined, so compilation will fail. Note that also includes macros
41  * from the nrf52_namechange.h file. */
42 
43 /* Differences between latest nRF52 headers and nRF52840 headers. */
44 
45 /* UART */
46 /* The registers PSELRTS, PSELTXD, PSELCTS, PSELRXD were restructured into a struct. */
47 #define PSELRTS       PSEL.RTS
48 #define PSELTXD       PSEL.TXD
49 #define PSELCTS       PSEL.CTS
50 #define PSELRXD       PSEL.RXD
51 
52 /* TWI */
53 /* The registers PSELSCL, PSELSDA were restructured into a struct. */
54 #define PSELSCL       PSEL.SCL
55 #define PSELSDA       PSEL.SDA
56 
57 
58 /* LPCOMP */
59 /* The hysteresis control enumerated values has changed name for nRF52840 devices. */
60 #define LPCOMP_HYST_HYST_NoHyst     LPCOMP_HYST_HYST_Disabled
61 #define LPCOMP_HYST_HYST_Hyst50mV   LPCOMP_HYST_HYST_Enabled
62 
63 
64 /* From nrf52_name_change.h. Several macros changed in different versions of nRF52 headers. By defining the following, any code written for any version of nRF52 headers will still compile. */
65 
66 /* I2S */
67 /* Several enumerations changed case. Adding old macros to keep compilation compatibility. */
68 #define I2S_ENABLE_ENABLE_DISABLE           I2S_ENABLE_ENABLE_Disabled
69 #define I2S_ENABLE_ENABLE_ENABLE            I2S_ENABLE_ENABLE_Enabled
70 #define I2S_CONFIG_MODE_MODE_MASTER         I2S_CONFIG_MODE_MODE_Master
71 #define I2S_CONFIG_MODE_MODE_SLAVE          I2S_CONFIG_MODE_MODE_Slave
72 #define I2S_CONFIG_RXEN_RXEN_DISABLE        I2S_CONFIG_RXEN_RXEN_Disabled
73 #define I2S_CONFIG_RXEN_RXEN_ENABLE         I2S_CONFIG_RXEN_RXEN_Enabled
74 #define I2S_CONFIG_TXEN_TXEN_DISABLE        I2S_CONFIG_TXEN_TXEN_Disabled
75 #define I2S_CONFIG_TXEN_TXEN_ENABLE         I2S_CONFIG_TXEN_TXEN_Enabled
76 #define I2S_CONFIG_MCKEN_MCKEN_DISABLE      I2S_CONFIG_MCKEN_MCKEN_Disabled
77 #define I2S_CONFIG_MCKEN_MCKEN_ENABLE       I2S_CONFIG_MCKEN_MCKEN_Enabled
78 #define I2S_CONFIG_SWIDTH_SWIDTH_8BIT       I2S_CONFIG_SWIDTH_SWIDTH_8Bit
79 #define I2S_CONFIG_SWIDTH_SWIDTH_16BIT      I2S_CONFIG_SWIDTH_SWIDTH_16Bit
80 #define I2S_CONFIG_SWIDTH_SWIDTH_24BIT      I2S_CONFIG_SWIDTH_SWIDTH_24Bit
81 #define I2S_CONFIG_ALIGN_ALIGN_LEFT         I2S_CONFIG_ALIGN_ALIGN_Left
82 #define I2S_CONFIG_ALIGN_ALIGN_RIGHT        I2S_CONFIG_ALIGN_ALIGN_Right
83 #define I2S_CONFIG_FORMAT_FORMAT_ALIGNED    I2S_CONFIG_FORMAT_FORMAT_Aligned
84 #define I2S_CONFIG_CHANNELS_CHANNELS_STEREO I2S_CONFIG_CHANNELS_CHANNELS_Stereo
85 #define I2S_CONFIG_CHANNELS_CHANNELS_LEFT   I2S_CONFIG_CHANNELS_CHANNELS_Left
86 #define I2S_CONFIG_CHANNELS_CHANNELS_RIGHT  I2S_CONFIG_CHANNELS_CHANNELS_Right
87 
88 /* LPCOMP */
89 /* Corrected typo in RESULT register. */
90 #define LPCOMP_RESULT_RESULT_Bellow         LPCOMP_RESULT_RESULT_Below
91 
92 
93 /*lint --flb "Leave library region" */
94 
95 #endif /* NRF51_TO_NRF52840_H */
96 
97